summaryrefslogtreecommitdiffstats
path: root/net/ieee802154
AgeCommit message (Collapse)AuthorFilesLines
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-4/+3
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-1/+1
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23net: ieee802154: fix net_device reference release too earlyLin Zhang1-4/+4
This patch fixes the kernel oops when release net_device reference in advance. In function raw_sendmsg(i think the dgram_sendmsg has the same problem), there is a race condition between dev_put and dev_queue_xmit when the device is gong that maybe lead to dev_queue_ximt to see an illegal net_device pointer. My test kernel is 3.13.0-32 and because i am not have a real 802154 device, so i change lowpan_newlink function to this: /* find and hold real wpan device */ real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK])); if (!real_dev) return -ENODEV; // if (real_dev->type != ARPHRD_IEEE802154) { // dev_put(real_dev); // return -EINVAL; // } lowpan_dev_info(dev)->real_dev = real_dev; lowpan_dev_info(dev)->fragment_tag = 0; mutex_init(&lowpan_dev_info(dev)->dev_list_mtx); Also, in order to simulate preempt, i change the raw_sendmsg function to this: skb->dev = dev; skb->sk = sk; skb->protocol = htons(ETH_P_IEEE802154); dev_put(dev); //simulate preempt schedule_timeout_uninterruptible(30 * HZ); err = dev_queue_xmit(skb); if (err > 0) err = net_xmit_errno(err); and this is my userspace test code named test_send_data: int main(int argc, char **argv) { char buf[127]; int sockfd; sockfd = socket(AF_IEEE802154, SOCK_RAW, 0); if (sockfd < 0) { printf("create sockfd error: %s\n", strerror(errno)); return -1; } send(sockfd, buf, sizeof(buf), 0); return 0; } This is my test case: root@zhanglin-x-computer:~/develop/802154# uname -a Linux zhanglin-x-computer 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux root@zhanglin-x-computer:~/develop/802154# ip link add link eth0 name lowpan0 type lowpan root@zhanglin-x-computer:~/develop/802154# //keep the lowpan0 device down root@zhanglin-x-computer:~/develop/802154# ./test_send_data & //wait a while root@zhanglin-x-computer:~/develop/802154# ip link del link dev lowpan0 //the device is gone //oops [381.303307] general protection fault: 0000 [#1]SMP [381.303407] Modules linked in: af_802154 6lowpan bnep rfcomm bluetooth nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek rts5139(C) snd_hda_intel snd_had_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_req intel_rapl snd_seq_device coretemp i915 kvm_intel kvm snd_timer snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cypted drm_kms_helper drm i2c_algo_bit soundcore video mac_hid parport_pc ppdev ip parport hid_generic usbhid hid ahci r8169 mii libahdi [381.304286] CPU:1 PID: 2524 Commm: 1 Tainted: G C 0 3.13.0-32-generic [381.304409] Hardware name: Haier Haier DT Computer/Haier DT Codputer, BIOS FIBT19H02_X64 06/09/2014 [381.304546] tasks: ffff000096965fc0 ti: ffffB0013779c000 task.ti: ffffB8013779c000 [381.304659] RIP: 0010:[<ffffffff01621fe1>] [<ffffffff81621fe1>] __dev_queue_ximt+0x61/0x500 [381.304798] RSP: 0018:ffffB8013779dca0 EFLAGS: 00010202 [381.304880] RAX: 272b031d57565351 RBX: 0000000000000000 RCX: ffff8800968f1a00 [381.304987] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800968f1a00 [381.305095] RBP: ffff8e013773dce0 R08: 0000000000000266 R09: 0000000000000004 [381.305202] R10: 0000000000000004 R11: 0000000000000005 R12: ffff88013902e000 [381.305310] R13: 000000000000007f R14: 000000000000007f R15: ffff8800968f1a00 [381.305418] FS: 00007fc57f50f740(0000) GS: ffff88013fc80000(0000) knlGS: 0000000000000000 [381.305540] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [381.305627] CR2: 00007fad0841c000 CR3: 00000001368dd000 CR4: 00000000001007e0 [361.905734] Stack: [381.305768] 00000000002052d0 000000003facb30a ffff88013779dcc0 ffff880137764000 [381.305898] ffff88013779de70 000000000000007f 000000000000007f ffff88013902e000 [381.306026] ffff88013779dcf0 ffffffff81622490 ffff88013779dd39 ffffffffa03af9f1 [381.306155] Call Trace: [381.306202] [<ffffffff81622490>] dev_queue_xmit+0x10/0x20 [381.306294] [<ffffffffa03af9f1>] raw_sendmsg+0x1b1/0x270 [af_802154] [381.306396] [<ffffffffa03af054>] ieee802154_sock_sendmsg+0x14/0x20 [af_802154] [381.306512] [<ffffffff816079eb>] sock_sendmsg+0x8b/0xc0 [381.306600] [<ffffffff811d52a5>] ? __d_alloc+0x25/0x180 [381.306687] [<ffffffff811a1f56>] ? kmem_cache_alloc_trace+0x1c6/0x1f0 [381.306791] [<ffffffff81607b91>] SYSC_sendto+0x121/0x1c0 [381.306878] [<ffffffff8109ddf4>] ? vtime_account_user+x54/0x60 [381.306975] [<ffffffff81020d45>] ? syscall_trace_enter+0x145/0x250 [381.307073] [<ffffffff816086ae>] SyS_sendto+0xe/0x10 [381.307156] [<ffffffff8172c87f>] tracesys+0xe1/0xe6 [381.307233] Code: c6 a1 a4 ff 41 8b 57 78 49 8b 47 20 85 d2 48 8b 80 78 07 00 00 75 21 49 8b 57 18 48 85 d2 74 18 48 85 c0 74 13 8b 92 ac 01 00 00 <3b> 50 10 73 08 8b 44 90 14 41 89 47 78 41 f6 84 24 d5 00 00 00 [381.307801] RIP [<ffffffff81621fe1>] _dev_queue_xmit+0x61/0x500 [381.307901] RSP <ffff88013779dca0> [381.347512] Kernel panic - not syncing: Fatal exception in interrupt [381.347747] drm_kms_helper: panic occurred, switching back to text console In my opinion, there is always exist a chance that the device is gong before call dev_queue_xmit. I think the latest kernel is have the same problem and that dev_put should be behind of the dev_queue_xmit. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-23net: ieee802154: remove explicit set skb->skLin Zhang1-2/+0
Explicit set skb->sk is needless, sock_alloc_send_skb is already set it. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg1-5/+5
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg1-15/+14
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan1-2/+2
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-16Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin1-2/+0
That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2016-12-16linux: drop __bitwise__ everywhereMichael S. Tsirkin1-1/+1
__bitwise__ used to mean "yes, please enable sparse checks unconditionally", but now that we dropped __CHECK_ENDIAN__ __bitwise is exactly the same. There aren't many users, replace it by __bitwise everywhere. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Akced-by: Lee Duncan <lduncan@suse.com>
2016-11-30ieee802154: check device typevegard.nossum@oracle.com1-1/+5
I've observed a NULL pointer dereference in ieee802154_del_iface() during netlink fuzzing. It's the ->wpan_phy dereference here: phy = dev->ieee802154_ptr->wpan_phy; My bet is that we're not checking that this is an IEEE802154 interface, so let's do what ieee802154_nl_get_dev() is doing. (Maybe we should even be calling this directly?) Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2016-10-27genetlink: mark families as __ro_after_initJohannes Berg2-3/+3
Now genl_register_family() is the only thing (other than the users themselves, perhaps, but I didn't find any doing that) writing to the family struct. In all families that I found, genl_register_family() is only called from __init functions (some indirectly, in which case I've add __init annotations to clarifly things), so all can actually be marked __ro_after_init. This protects the data structure from accidental corruption. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: statically initialize familiesJohannes Berg2-27/+30
Instead of providing macros/inline functions to initialize the families, make all users initialize them statically and get rid of the macros. This reduces the kernel code size by about 1.6k on x86-64 (with allyesconfig). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: no longer support using static family IDsJohannes Berg2-2/+0
Static family IDs have never really been used, the only use case was the workaround I introduced for those users that assumed their family ID was also their multicast group ID. Additionally, because static family IDs would never be reserved by the generic netlink code, using a relatively low ID would only work for built-in families that can be registered immediately after generic netlink is started, which is basically only the control family (apart from the workaround code, which I also had to add code for so it would reserve those IDs) Thus, anything other than GENL_ID_GENERATE is flawed and luckily not used except in the cases I mentioned. Move those workarounds into a few lines of code, and then get rid of GENL_ID_GENERATE entirely, making it more robust. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-27genetlink: introduce and use genl_family_attrbuf()Johannes Berg1-3/+4
This helper function allows family implementations to access their family's attrbuf. This gets rid of the attrbuf usage in families, and also adds locking validation, since it's not valid to use the attrbuf with parallel_ops or outside of the dumpit callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-08ieee802154: 6lowpan: fix intra pan id checkAlexander Aring1-1/+1
The RIOT-OS stack does send intra-pan frames but don't set the intra pan flag inside the mac header. It seems this is valid frame addressing but inefficient. Anyway this patch adds a new function for intra pan addressing, doesn't matter if intra pan flag or source and destination are the same. The newly introduction function will be used to check on intra pan addressing for 6lowpan. Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08ieee802154: allow netns create of lowpan interfaceAlexander Aring1-2/+1
This patch reverts commit f9d1ce8f81eb ("ieee802154: fix netns settings"). The lowpan interface need to be created inside the net namespace where the wpan interface is available. The wpan namespace can be changed only by nl802154 before. Without this patch it's not possible to create a lowpan interface for a wpan interface which isn't inside init_net namespace. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-08ieee802154: add netns supportAlexander Aring3-6/+120
This patch adds netns support for 802.15.4 subsystem. Most parts are copy&pasted from wireless subsystem, it has the identically userspace API. Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-05net: add dev arg to ndo_neigh_construct/destroyJiri Pirko1-1/+1
As the following patch will allow upper devices to follow the call down lower devices, we need to add dev here and not rely on n->dev. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-156lowpan: add support for 802.15.4 short addr handlingAlexander Aring1-56/+57
This patch adds necessary handling for use the short address for 802.15.4 6lowpan. It contains support for IPHC address compression and new matching algorithmn to decide which link layer address will be used for 802.15.4 frame. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-156lowpan: add private neighbour dataAlexander Aring1-0/+12
This patch will introduce a 6lowpan neighbour private data. Like the interface private data we handle private data for generic 6lowpan and for link-layer specific 6lowpan. The current first use case if to save the short address for a 802.15.4 6lowpan neighbour. Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09net: add netdev_lockdep_set_classes() helperEric Dumazet1-15/+1
It is time to add netdev_lockdep_set_classes() helper so that lockdep annotations per device type are easier to manage. This removes a lot of copies and missing annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-07net_sched: transform qdisc running bit into a seqcountEric Dumazet1-0/+3
Instead of using a single bit (__QDISC___STATE_RUNNING) in sch->__state, use a seqcount. This adds lockdep support, but more importantly it will allow us to sample qdisc/class statistics without having to grab qdisc root lock. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-29ieee802154: fix logic error in ieee802154_llsec_parse_dev_addrBaozeng Ding1-2/+2
Fix a logic error to avoid potential null pointer dereference. Signed-off-by: Baozeng Ding <sploving1@gmail.com> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Merge branch 'for-upstream' of ↵David S. Miller4-23/+21
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-04-26 Here's another set of Bluetooth & 802.15.4 patches for the 4.7 kernel: - Cleanups & refactoring of ieee802154 & 6lowpan code - Security related additions to ieee802154 and mrf24j40 driver - Memory corruption fix to Bluetooth 6lowpan code - Race condition fix in vhci driver - Enhancements to the atusb 802.15.4 driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ieee802154: use nla_put_u64_64bit()Nicolas Dichtel2-7/+13
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_le64(): align on a 64-bit areaNicolas Dichtel1-5/+8
nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-136lowpan: move lowpan_802154_dev to 6lowpanAlexander Aring1-12/+0
This patch moves the 802.15.4 link layer specific structures to generic 6lowpan. This is necessary for special 802.15.4 6lowpan handling in 6lowpan generic layer. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-136lowpan: change naming for lowpan private dataAlexander Aring3-13/+13
This patch changes the naming for interface private data for lowpan intefaces. The current private data scheme is: ------------------------------------------------- | 6LoWPAN Generic | LinkLayer 6LoWPAN | ------------------------------------------------- the current naming schemes are: - 6LoWPAN Generic: - lowpan_priv - LinkLayer 6LoWPAN: - BTLE - lowpan_dev - 802.15.4: - lowpan_dev_info the new naming scheme with this patch will be: - 6LoWPAN Generic: - lowpan_dev - LinkLayer 6LoWPAN: - BTLE - lowpan_btle_dev - 802.15.4: - lowpan_802154_dev Signed-off-by: Alexander Aring <aar@pengutronix.de> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13ieee802154: 6lowpan: fix short addr hashAlexander Aring1-1/+1
The short address is unique in combination with the panid. This patch will add the panid for generating an ieee802154 address hash. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-13nl802154: avoid address change while running lowpanAlexander Aring1-0/+10
The generation of autoconfigured IPv6 link-local addresses starts with a notification on interface up. To handle autoconfiguration according to RFC 4944 requires pan id and short address to generate an autoconfigured link-local address. This patch will avoid changing of these link-layer address configuration while lowpan interface is up. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23ieee802154: 6lowpan: fix return of netdev notifierAlexander Aring1-4/+3
This patch fixed the return value of netdev notifier. If the command is a don't care a NOTIFY_DONE should be returned. If the command matched a NOTIFY_OK should be returned. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-11sock: struct proto hash function may errorCraig Gallek1-4/+13
In order to support fast reuseport lookups in TCP, the hash function defined in struct proto must be capable of returning an error code. This patch changes the function signature of all related hash functions to return an integer and handles or propagates this return value at all call sites. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05inet: kill unused skb_free opFlorian Westphal1-1/+0
The only user was removed in commit 029f7f3b8701cc7a ("netfilter: ipv6: nf_defrag: avoid/free clone operations"). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-106lowpan: add lowpan dev register helpersAlexander Aring1-4/+2
This patch introduces register and unregister functionality for lowpan interfaces. While register a lowpan interface there are several things which need to be initialize by the 6lowpan subsystem. Upcoming functionality need to register/unregister per interface components e.g. debugfs entry. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-11-02net: fix percpu memory leaksEric Dumazet1-3/+8
This patch fixes following problems : 1) percpu_counter_init() can return an error, therefore init_frag_mem_limit() must propagate this error so that inet_frags_init_net() can do the same up to its callers. 2) If ip[46]_frags_ns_ctl_register() fail, we must unwind properly and free the percpu_counter. Without this fix, we leave freed object in percpu_counters global list (if CONFIG_HOTPLUG_CPU) leading to crashes. This bug was detected by KASAN and syzkaller tool (http://github.com/google/syzkaller) Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22ieee802154: 6lowpan: fix memory leakAlexander Aring1-4/+9
Looking at current situation of memory management in 6lowpan receive function I detected some invalid handling. After calling lowpan_invoke_rx_handlers we will do a kfree_skb and then NET_RX_DROP on error handling. We don't do this before, also on skb_share_check/skb_unshare which might manipulate the reference counters. After running some 'grep -r "dev_add_pack" net/' to look how others packet-layer receive callbacks works I detected that every subsystem do a kfree_skb, then NET_RX_DROP without calling skb functions which might manipulate the skb reference counters. This is the reason why we should do the same here like all others subsystems. I didn't find any documentation how the packet-layer receive callbacks handle NET_RX_DROP return values either. This patch will add a kfree_skb, then NET_RX_DROP handling for the "trivial checks", in case of skb_share_check/skb_unshare the kfree_skb call will be done inside these functions. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: remove lowpan_is_addr_broadcastAlexander Aring1-1/+1
This macro is used at 802.15.4 6LoWPAN only and can be replaced by memcmp with the interface broadcast address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: move IPHC functionality definesAlexander Aring1-0/+3
This patch removes the IPHC related defines for doing bit manipulation from global 6lowpan header to the iphc file which should the only one implementation which use these defines. Also move next header compression defines to their nhc implementation. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: cleanup lowpan_header_decompressAlexander Aring1-25/+1
This patch changes the lowpan_header_decompress function by removing inklayer related information from parameters. This is currently for supporting short and extended address for iphc handling in 802154. We don't support short address handling anyway right now, but there exists already code for handling short addresses in lowpan_header_decompress. The address parameters are also changed to a void pointer, so 6LoWPAN linklayer specific code can put complex structures as these parameters and cast it again inside the generic code by evaluating linklayer type before. The order is also changed by destination address at first and then source address, which is the same like all others functions where destination is always the first, memcpy, dev_hard_header, lowpan_header_compress, etc. This patch also moves the fetching of iphc values from 6LoWPAN linklayer specific code into the generic branch. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-216lowpan: cleanup lowpan_header_compressAlexander Aring1-1/+1
This patch changes the lowpan_header_compress function by removing unused parameters like "len" and drop static value parameters of protocol type. Instead we really check the protocol type inside inside the skb structure. Also we drop the use of IEEE802154_ADDR_LEN which is link-layer specific. Instead we using EUI64_ADDR_LEN which should always the default case for now. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-086lowpan: move shared settings to lowpan_netdev_setupAlexander Aring1-4/+0
This patch moves values for all lowpan interface to the shared implementation of 6lowpan. This patch also quietly fixes the forgotten IFF_NO_QUEUE flag for the bluetooth 6LoWPAN interface. An identically commit is 4afbc0d ("net: 6lowpan: convert to using IFF_NO_QUEUE") which wasn't changed for bluetooth 6lowpan. All 6lowpan interfaces should be virtual with IFF_NO_QUEUE, using EUI64 address length, the mtu size is 1280 (IPV6_MIN_MTU) and the netdev type is ARPHRD_6LOWPAN. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-02nl802154: Missing return in nl802154_add_llsec_key()Dan Carpenter1-0/+1
There was a missing return here so it meant that often ieee802154_llsec_parse_key_id() was not called. Fixes: a26c5fd7622d ('nl802154: add support for security layer') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-01ieee802154: handle datagram variables as u16Alexander Aring3-7/+9
This reverts commit 9abc378c66e3d6f437eed77c1c534cbc183523f7 ("ieee802154: 6lowpan: change datagram var types"). The reason is that I forgot the IPv6 fragmentation here. Our MTU of lowpan interface is 1280 and skb->len should not above of that. If we reach a payload above 1280 in IPv6 header then we have a IPv6 fragmentation above 802.15.4 6LoWPAN fragmentation. The type "u16" was fine, instead I added now a WARN_ON_ONCE if skb->len is above MTU which should never happen otherwise IPv6 on minimum MTU size is broken. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: 6lowpan: add tx/rx statsAlexander Aring2-0/+6
This patch adds support for increment transmit and receive stats. The meaning of these stats are IPv6 based, which shows the stats after running the 6lowpan adaptation layer (uncompression/compression, fragmentation handling) on receive and before the adaptation layer when transmit. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: 6lowpan: don't skip first dsn while fragmentationAlexander Aring1-10/+17
This patch fixes the data frame sequence numer (dsn) while 6lowpan fragmentation for frag1. Currently we create one 802.15.4 header at first, then check if it's match into one frame and at the end construct many fragments and calling wpan_dev_hard_header for each of them, inclusive for the first fragment. This will make the first generated header to garbage, instead we copying this header for frag1 instead of generate a new one which skips one dsn. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: 6lowpan: change datagram var typesAlexander Aring3-7/+7
This patch changes datagram size variable from u16 type to unsigned int. The reason is that an IPv6 header has an MAX_UIN16 payload length, but the datagram size is payload + IPv6 header length. This avoids overflows at some places. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-09-30ieee802154: change mtu size behaviourAlexander Aring1-2/+2
This patch changes the mtu size of 802.15.4 interfaces. The current setting is the meaning of the maximum transport unit with mac header, which is 127 bytes according 802.15.4. The linux meaning of the mtu size field is the maximum payload of a mac frame. Like in ethernet, which is 1500 bytes. We have dynamic length of mac frames in 802.15.4, this is why we assume the minimum header length which is hard_header_len. This contains fc and sequence fields. These can evaluated by driver layer without additional checks. We currently don't support to set the FCS from userspace, so we need to subtract this from mtu size as well. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 03:36:52 +0000