summaryrefslogtreecommitdiffstats
path: root/net/ieee802154
AgeCommit message (Collapse)AuthorFilesLines
2018-09-21net/ipfrag: let ip[6]frag_high_thresh in ns be higher than in init_netPeter Oskolkov1-1/+0
Currently, ip[6]frag_high_thresh sysctl values in new namespaces are hard-limited to those of the root/init ns. There are at least two use cases when it would be desirable to set the high_thresh values higher in a child namespace vs the global hard limit: - a security/ddos protection policy may lower the thresholds in the root/init ns but allow for a special exception in a child namespace - testing: a test running in a namespace may want to set these thresholds higher in its namespace than what is in the root/init ns The new behavior: # ip netns add testns # ip netns exec testns bash # sysctl -w net.ipv4.ipfrag_high_thresh=9000000 net.ipv4.ipfrag_high_thresh = 9000000 # sysctl net.ipv4.ipfrag_high_thresh net.ipv4.ipfrag_high_thresh = 9000000 # sysctl -w net.ipv6.ip6frag_high_thresh=9000000 net.ipv6.ip6frag_high_thresh = 9000000 # sysctl net.ipv6.ip6frag_high_thresh net.ipv6.ip6frag_high_thresh = 9000000 The old behavior: # ip netns add testns # ip netns exec testns bash # sysctl -w net.ipv4.ipfrag_high_thresh=9000000 net.ipv4.ipfrag_high_thresh = 9000000 # sysctl net.ipv4.ipfrag_high_thresh net.ipv4.ipfrag_high_thresh = 4194304 # sysctl -w net.ipv6.ip6frag_high_thresh=9000000 net.ipv6.ip6frag_high_thresh = 9000000 # sysctl net.ipv6.ip6frag_high_thresh net.ipv6.ip6frag_high_thresh = 4194304 Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10net: Add and use skb_mark_not_on_list().David S. Miller1-1/+1
An SKB is not on a list if skb->next is NULL. Codify this convention into a helper function and use it where we are dequeueing an SKB and need to mark it as such. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-06net: ieee802154: 6lowpan: remove redundant pointers 'fq' and 'net'Colin Ian King1-5/+0
Pointers fq and net are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'fq' set but not used [-Wunused-but-set-variable] warning: variable 'net' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-08-06net: 6lowpan: fix reserved space for single framesAlexander Aring1-3/+18
This patch fixes patch add handling to take care tail and headroom for single 6lowpan frames. We need to be sure we have a skb with the right head and tailroom for single frames. This patch do it by using skb_copy_expand() if head and tailroom is not enough allocated by upper layer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059 Reported-by: David Palma <david.palma@ntnu.no> Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-08-06Merge remote-tracking branch 'net-next/master'Stefan Schmidt4-3/+7
2018-07-24net: remove blank lines at end of fileStephen Hemminger2-2/+0
Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree: 1) No need to set ttl from reject action for the bridge family, from Taehee Yoo. 2) Use a fixed timeout for flow that are passed up from the flowtable to conntrack, from Florian Westphal. 3) More preparation patches for tproxy support for nf_tables, from Mate Eckl. 4) Remove unnecessary indirection in core IPv6 checksum function, from Florian Westphal. 5) Use nf_ct_get_tuplepr() from openvswitch, instead of opencoding it. From Florian Westphal. 6) socket match now selects socket infrastructure, instead of depending on it. From Mate Eckl. 7) Patch series to simplify conntrack tuple building/parsing from packet path and ctnetlink, from Florian Westphal. 8) Fetch timeout policy from protocol helpers, instead of doing it from core, from Florian Westphal. 9) Merge IPv4 and IPv6 protocol trackers into conntrack core, from Florian Westphal. 10) Depend on CONFIG_NF_TABLES_IPV6 and CONFIG_IP6_NF_IPTABLES respectively, instead of IPV6. Patch from Mate Eckl. 11) Add specific function for garbage collection in conncount, from Yi-Hung Wei. 12) Catch number of elements in the connlimit list, from Yi-Hung Wei. 13) Move locking to nf_conncount, from Yi-Hung Wei. 14) Series of patches to add lockless tree traversal in nf_conncount, from Yi-Hung Wei. 15) Resolve clash in matching conntracks when race happens, from Martynas Pumputis. 16) If connection entry times out, remove template entry from the ip_vs_conn_tab table to improve behaviour under flood, from Julian Anastasov. 17) Remove useless parameter from nf_ct_helper_ext_add(), from Gao feng. 18) Call abort from 2-phase commit protocol before requesting modules, make sure this is done under the mutex, from Florian Westphal. 19) Grab module reference when starting transaction, also from Florian. 20) Dynamically allocate expression info array for pre-parsing, from Florian. 21) Add per netns mutex for nf_tables, from Florian Westphal. 22) A couple of patches to simplify and refactor nf_osf code to prepare for nft_osf support. 23) Break evaluation on missing socket, from Mate Eckl. 24) Allow to match socket mark from nft_socket, from Mate Eckl. 25) Remove dependency on nf_defrag_ipv6, now that IPv6 tracker is built-in into nf_conntrack. From Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18ipv6: remove dependency of nf_defrag_ipv6 on ipv6 moduleFlorian Westphal1-1/+1
IPV6=m DEFRAG_IPV6=m CONNTRACK=y yields: net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get': net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable' net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6' Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params ip6_frag_init and ip6_expire_frag_queue so it would be needed to force IPV6=y too. This patch gets rid of the 'followup linker error' by removing the dependency of ipv6.ko symbols from netfilter ipv6 defrag. Shared code is placed into a header, then used from both. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-07-13ieee802154: add rx LQI from userspaceRomuald CARI1-0/+17
The Link Quality Indication data exposed by drivers could not be accessed from userspace. Since this data is per-datagram received, it makes sense to make it available to userspace application through the ancillary data mechanism in recvmsg rather than through ioctls. This can be activated using the socket option WPAN_WANTLQI under SOL_IEEE802154 protocol. This LQI data is available in the ancillary data buffer under the SOL_IEEE802154 level as the type WPAN_LQI. The value is an unsigned byte indicating the link quality with values ranging 0-255. Signed-off-by: Romuald Cari <romuald.cari@devialet.com> Signed-off-by: Clément Peron <clement.peron@devialet.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-07-05ieee802154: 6lowpan: set IFLA_LINKLubomir Rintel1-0/+6
Otherwise NetworkManager (and iproute alike) is not able to identify the parent IEEE 802.15.4 interface of a 6LoWPAN link. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-2/+2
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04Merge branch 'work.aio-1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-05-26net: convert datagram_poll users tp ->poll_maskChristoph Hellwig1-2/+2
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23net: ieee802154: 6lowpan: fix frag reassemblyAlexander Aring2-9/+9
This patch initialize stack variables which are used in frag_lowpan_compare_key to zero. In my case there are padding bytes in the structures ieee802154_addr as well in frag_lowpan_compare_key. Otherwise the key variable contains random bytes. The result is that a compare of two keys by memcmp works incorrect. Fixes: 648700f76b03 ("inet: frags: use rhashtables for reassembly units") Signed-off-by: Alexander Aring <aring@mojatatu.com> Reported-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2018-04-04inet: frags: fix ip6frag_low_thresh boundaryEric Dumazet1-2/+0
Giving an integer to proc_doulongvec_minmax() is dangerous on 64bit arches, since linker might place next to it a non zero value preventing a change to ip6frag_low_thresh. ip6frag_low_thresh is not used anymore in the kernel, but we do not want to prematuraly break user scripts wanting to change it. Since specifying a minimal value of 0 for proc_doulongvec_minmax() is moot, let's remove these zero values in all defrag units. Fixes: 6e00f7dd5e4e ("ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31inet: frags: break the 2GB limit for frags storageEric Dumazet1-5/+5
Some users are willing to provision huge amounts of memory to be able to perform reassembly reasonnably well under pressure. Current memory tracking is using one atomic_t and integers. Switch to atomic_long_t so that 64bit arches can use more than 2GB, without any cost for 32bit arches. Note that this patch avoids an overflow error, if high_thresh was set to ~2GB, since this test in inet_frag_alloc() was never true : if (... || frag_mem_limit(nf) > nf->high_thresh) Tested: $ echo 16000000000 >/proc/sys/net/ipv4/ipfrag_high_thresh <frag DDOS> $ grep FRAG /proc/net/sockstat FRAG: inuse 14705885 memory 16000002880 $ nstat -n ; sleep 1 ; nstat | grep Reas IpReasmReqds 3317150 0.0 IpReasmFails 3317112 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31inet: frags: remove inet_frag_maybe_warn_overflow()Eric Dumazet1-3/+2
This function is obsolete, after rhashtable addition to inet defrag. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31inet: frags: use rhashtables for reassembly unitsEric Dumazet2-71/+46
Some applications still rely on IP fragmentation, and to be fair linux reassembly unit is not working under any serious load. It uses static hash tables of 1024 buckets, and up to 128 items per bucket (!!!) A work queue is supposed to garbage collect items when host is under memory pressure, and doing a hash rebuild, changing seed used in hash computations. This work queue blocks softirqs for up to 25 ms when doing a hash rebuild, occurring every 5 seconds if host is under fire. Then there is the problem of sharing this hash table for all netns. It is time to switch to rhashtables, and allocate one of them per netns to speedup netns dismantle, since this is a critical metric these days. Lookup is now using RCU. A followup patch will even remove the refcount hold/release left from prior implementation and save a couple of atomic operations. Before this patch, 16 cpus (16 RX queue NIC) could not handle more than 1 Mpps frags DDOS. After the patch, I reach 9 Mpps without any tuning, and can use up to 2GB of storage for the fragments (exact number depends on frags being evicted after timeout) $ grep FRAG /proc/net/sockstat FRAG: inuse 1966916 memory 2140004608 A followup patch will change the limits for 64bit arches. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Florian Westphal <fw@strlen.de> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31inet: frags: refactor lowpan_net_frag_init()Eric Dumazet1-9/+11
We want to call lowpan_net_frag_init() earlier. Similar to commit "inet: frags: refactor ipv6_frag_init()" This is a prereq to "inet: frags: use rhashtables for reassembly units" Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31inet: frags: add a pointer to struct netns_fragsEric Dumazet1-6/+7
In order to simplify the API, add a pointer to struct inet_frags. This will allow us to make things less complex. These functions no longer have a struct inet_frags parameter : inet_frag_destroy(struct inet_frag_queue *q /*, struct inet_frags *f */) inet_frag_put(struct inet_frag_queue *q /*, struct inet_frags *f */) inet_frag_kill(struct inet_frag_queue *q /*, struct inet_frags *f */) inet_frags_exit_net(struct netns_frags *nf /*, struct inet_frags *f */) ip6_expire_frag_queue(struct net *net, struct frag_queue *fq) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31inet: frags: change inet_frags_init_net() return valueEric Dumazet1-3/+8
We will soon initialize one rhashtable per struct netns_frags in inet_frags_init_net(). This patch changes the return value to eventually propagate an error. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai2-2/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+8
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-22net: Convert lowpan_frags_opsKirill Tkhai1-0/+1
These pernet_operations register and unregister sysctl. Also, there is inet_frags_exit_net() called in exit method, which has to be safe after a560002437d3 "net: Fix hlist corruptions in inet_evict_bucket()". Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-09ieee802154: 6lowpan: fix possible NULL deref in lowpan_device_event()Eric Dumazet1-4/+8
A tun device type can trivially be set to arbitrary value using TUNSETLINK ioctl(). Therefore, lowpan_device_event() must really check that ieee802154_ptr is not NULL. Fixes: 2c88b5283f60d ("ieee802154: 6lowpan: remove check on null") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27Merge branch 'ieee802154-for-davem-2018-02-26' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2018-02-26 An update from ieee802154 for *net-next* Alexander corrected a setting which got lost during some 6lowpan rework a while back and Xue Liu provided us with a new driver for the MCR20A transceiver. If there are any issues let me know. If not, please pull. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert cfg802154_pernet_opsKirill Tkhai1-0/+1
These pernet_operations have only exit method, which moves devices from cfg802154_rdev_list to init_net. This may occur in any time from nl802154_wpan_phy_netns(), so we are nice with rtnl_lock() synchronization. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14ieee802154: 6lowpan: set IFF_NO_QUEUEAlexander Aring1-0/+1
This patch sets the IFF_NO_QUEUE for IEEE 802.15.4 6lowpan interfaces. As commit 24dcbf662205 ("6lowpan: Don't set IFF_NO_QUEUE") removes it for "reasons" from the bluetooth 6lowpan subsystem. In IEEE 802.15.4 the lower interface deals with one qdisc for the real hardware, 6LoWPAN does the protocol adaption only and no second queuing on top. Signed-off-by: Alexander Aring <aring@mojatatu.com> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller7-0/+7
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman7-0/+7
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-18Merge remote-tracking branch 'net-next/master'Stefan Schmidt1-2/+3
2017-10-18inet: frags: Convert timers to use timer_setup()Kees Cook1-2/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Alexander Aring <alex.aring@gmail.com> Cc: Stefan Schmidt <stefan@osg.samsung.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: Florian Westphal <fw@strlen.de> Cc: linux-wpan@vger.kernel.org Cc: netdev@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: coreteam@netfilter.org Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> # for ieee802154 Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16ieee802154: netlink: fix typo of the name of struct genl_opsXue Liu1-3/+3
Signed-off-by: Xue Liu <liuxuenetmail@gmail.com> Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2017-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+3
2017-09-03Revert "net: fix percpu memory leaks"Jesper Dangaard Brouer1-8/+3
This reverts commit 1d6119baf0610f813eb9d9580eb4fd16de5b4ceb. After reverting commit 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") then here is no need for this fix-up patch. As percpu_counter is no longer used, it cannot memory leak it any-longer. Fixes: 6d7b857d541e ("net: use lib/percpu_counter API for fragmentation mem accounting") Fixes: 1d6119baf061 ("net: fix percpu memory leaks") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25ieee802154: 6lowpan: make header_ops constBhumika Goyal1-1/+1
Make this const as it is only stored as a reference in a const field of a net_device structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.newlinkMatthias Schiffer1-1/+2
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg1-4/+3
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The conflicts were two cases of overlapping changes in batman-adv and the qed driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller1-1/+1
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-23net: ieee802154: fix net_device reference release too earlyLin Zhang1-4/+4
This patch fixes the kernel oops when release net_device reference in advance. In function raw_sendmsg(i think the dgram_sendmsg has the same problem), there is a race condition between dev_put and dev_queue_xmit when the device is gong that maybe lead to dev_queue_ximt to see an illegal net_device pointer. My test kernel is 3.13.0-32 and because i am not have a real 802154 device, so i change lowpan_newlink function to this: /* find and hold real wpan device */ real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK])); if (!real_dev) return -ENODEV; // if (real_dev->type != ARPHRD_IEEE802154) { // dev_put(real_dev); // return -EINVAL; // } lowpan_dev_info(dev)->real_dev = real_dev; lowpan_dev_info(dev)->fragment_tag = 0; mutex_init(&lowpan_dev_info(dev)->dev_list_mtx); Also, in order to simulate preempt, i change the raw_sendmsg function to this: skb->dev = dev; skb->sk = sk; skb->protocol = htons(ETH_P_IEEE802154); dev_put(dev); //simulate preempt schedule_timeout_uninterruptible(30 * HZ); err = dev_queue_xmit(skb); if (err > 0) err = net_xmit_errno(err); and this is my userspace test code named test_send_data: int main(int argc, char **argv) { char buf[127]; int sockfd; sockfd = socket(AF_IEEE802154, SOCK_RAW, 0); if (sockfd < 0) { printf("create sockfd error: %s\n", strerror(errno)); return -1; } send(sockfd, buf, sizeof(buf), 0); return 0; } This is my test case: root@zhanglin-x-computer:~/develop/802154# uname -a Linux zhanglin-x-computer 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux root@zhanglin-x-computer:~/develop/802154# ip link add link eth0 name lowpan0 type lowpan root@zhanglin-x-computer:~/develop/802154# //keep the lowpan0 device down root@zhanglin-x-computer:~/develop/802154# ./test_send_data & //wait a while root@zhanglin-x-computer:~/develop/802154# ip link del link dev lowpan0 //the device is gone //oops [381.303307] general protection fault: 0000 [#1]SMP [381.303407] Modules linked in: af_802154 6lowpan bnep rfcomm bluetooth nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek rts5139(C) snd_hda_intel snd_had_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_req intel_rapl snd_seq_device coretemp i915 kvm_intel kvm snd_timer snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cypted drm_kms_helper drm i2c_algo_bit soundcore video mac_hid parport_pc ppdev ip parport hid_generic usbhid hid ahci r8169 mii libahdi [381.304286] CPU:1 PID: 2524 Commm: 1 Tainted: G C 0 3.13.0-32-generic [381.304409] Hardware name: Haier Haier DT Computer/Haier DT Codputer, BIOS FIBT19H02_X64 06/09/2014 [381.304546] tasks: ffff000096965fc0 ti: ffffB0013779c000 task.ti: ffffB8013779c000 [381.304659] RIP: 0010:[<ffffffff01621fe1>] [<ffffffff81621fe1>] __dev_queue_ximt+0x61/0x500 [381.304798] RSP: 0018:ffffB8013779dca0 EFLAGS: 00010202 [381.304880] RAX: 272b031d57565351 RBX: 0000000000000000 RCX: ffff8800968f1a00 [381.304987] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800968f1a00 [381.305095] RBP: ffff8e013773dce0 R08: 0000000000000266 R09: 0000000000000004 [381.305202] R10: 0000000000000004 R11: 0000000000000005 R12: ffff88013902e000 [381.305310] R13: 000000000000007f R14: 000000000000007f R15: ffff8800968f1a00 [381.305418] FS: 00007fc57f50f740(0000) GS: ffff88013fc80000(0000) knlGS: 0000000000000000 [381.305540] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [381.305627] CR2: 00007fad0841c000 CR3: 00000001368dd000 CR4: 00000000001007e0 [361.905734] Stack: [381.305768] 00000000002052d0 000000003facb30a ffff88013779dcc0 ffff880137764000 [381.305898] ffff88013779de70 000000000000007f 000000000000007f ffff88013902e000 [381.306026] ffff88013779dcf0 ffffffff81622490 ffff88013779dd39 ffffffffa03af9f1 [381.306155] Call Trace: [381.306202] [<ffffffff81622490>] dev_queue_xmit+0x10/0x20 [381.306294] [<ffffffffa03af9f1>] raw_sendmsg+0x1b1/0x270 [af_802154] [381.306396] [<ffffffffa03af054>] ieee802154_sock_sendmsg+0x14/0x20 [af_802154] [381.306512] [<ffffffff816079eb>] sock_sendmsg+0x8b/0xc0 [381.306600] [<ffffffff811d52a5>] ? __d_alloc+0x25/0x180 [381.306687] [<ffffffff811a1f56>] ? kmem_cache_alloc_trace+0x1c6/0x1f0 [381.306791] [<ffffffff81607b91>] SYSC_sendto+0x121/0x1c0 [381.306878] [<ffffffff8109ddf4>] ? vtime_account_user+x54/0x60 [381.306975] [<ffffffff81020d45>] ? syscall_trace_enter+0x145/0x250 [381.307073] [<ffffffff816086ae>] SyS_sendto+0xe/0x10 [381.307156] [<ffffffff8172c87f>] tracesys+0xe1/0xe6 [381.307233] Code: c6 a1 a4 ff 41 8b 57 78 49 8b 47 20 85 d2 48 8b 80 78 07 00 00 75 21 49 8b 57 18 48 85 d2 74 18 48 85 c0 74 13 8b 92 ac 01 00 00 <3b> 50 10 73 08 8b 44 90 14 41 89 47 78 41 f6 84 24 d5 00 00 00 [381.307801] RIP [<ffffffff81621fe1>] _dev_queue_xmit+0x61/0x500 [381.307901] RSP <ffff88013779dca0> [381.347512] Kernel panic - not syncing: Fatal exception in interrupt [381.347747] drm_kms_helper: panic occurred, switching back to text console In my opinion, there is always exist a chance that the device is gong before call dev_queue_xmit. I think the latest kernel is have the same problem and that dev_put should be behind of the dev_queue_xmit. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-05-23net: ieee802154: remove explicit set skb->skLin Zhang1-2/+0
Explicit set skb->sk is needless, sock_alloc_send_skb is already set it. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-04-13netlink: pass extended ACK struct where availableJohannes Berg1-5/+5
This is an add-on to the previous patch that passes the extended ACK structure where it's already available by existing genl_info or extack function arguments. This was done with this spatch (with some manual adjustment of indentation): @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, info->extack) ... } @@ expression A, B, C, D, E; identifier fn, info; @@ fn(..., struct genl_info *info, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, info->extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse(A, B, C, D, E, NULL) +nla_parse(A, B, C, D, E, extack) ...> } @@ expression A, B, C, D, E; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { ... -nlmsg_parse(A, B, C, D, E, NULL) +nlmsg_parse(A, B, C, D, E, extack) ... } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_parse_nested(A, B, C, D, NULL) +nla_parse_nested(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nlmsg_validate(A, B, C, D, NULL) +nlmsg_validate(A, B, C, D, extack) ...> } @@ expression A, B, C, D; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate(A, B, C, D, NULL) +nla_validate(A, B, C, D, extack) ...> } @@ expression A, B, C; identifier fn, extack; @@ fn(..., struct netlink_ext_ack *extack, ...) { <... -nla_validate_nested(A, B, C, NULL) +nla_validate_nested(A, B, C, extack) ...> } Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13netlink: pass extended ACK struct to parsing functionsJohannes Berg1-15/+14
Pass the new extended ACK reporting struct to all of the generic netlink parsing functions. For now, pass NULL in almost all callers (except for some in the core.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27lib/vsprintf.c: remove %Z supportAlexey Dobriyan1-2/+2
Now that %z is standartised in C99 there is no reason to support %Z. Unlike %L it doesn't even make format strings smaller. Use BUILD_BUG_ON in a couple ATM drivers. In case anyone didn't notice lib/vsprintf.o is about half of SLUB which is in my opinion is quite an achievement. Hopefully this patch inspires someone else to trim vsprintf.c more. Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-16Makefile: drop -D__CHECK_ENDIAN__ from cflagsMichael S. Tsirkin1-2/+0
That's the default now, no need for makefiles to set it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
2016-12-16linux: drop __bitwise__ everywhereMichael S. Tsirkin1-1/+1
__bitwise__ used to mean "yes, please enable sparse checks unconditionally", but now that we dropped __CHECK_ENDIAN__ __bitwise is exactly the same. There aren't many users, replace it by __bitwise everywhere. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Akced-by: Lee Duncan <lduncan@suse.com>
2016-11-30ieee802154: check device typevegard.nossum@oracle.com1-1/+5
I've observed a NULL pointer dereference in ieee802154_del_iface() during netlink fuzzing. It's the ->wpan_phy dereference here: phy = dev->ieee802154_ptr->wpan_phy; My bet is that we're not checking that this is an IEEE802154 interface, so let's do what ieee802154_nl_get_dev() is doing. (Maybe we should even be calling this directly?) Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Sergey Lapin <slapin@ossfans.org> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Alexander Aring <aar@pengutronix.de> Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com>