summaryrefslogtreecommitdiffstats
path: root/net/ieee802154
AgeCommit message (Collapse)AuthorFilesLines
2012-06-28net: Use NLMSG_DEFAULT_SIZE in combination with nlmsg_new()Thomas Graf3-4/+4
Using NLMSG_GOODSIZE results in multiple pages being used as nlmsg_new() will automatically add the size of the netlink header to the payload thus exceeding the page limit. NLMSG_DEFAULT_SIZE takes this into account. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-276lowpan: double unlock on an error pathDan Carpenter1-1/+1
We already unlocked a few lines earlier here, so we can go directly to drop without passing through unlock. This was introduced recently in c5d3687f6c ('6lowpan: read data from skb safely'). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-256lowpan: remove excessive argument in pr_debugalex.bluesman.smirnov@gmail.com1-57/+37
Remove excessive __func__ argument in pr_debug function and some excessive debug messages. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-256lowpan: fix hop limit compressionalex.bluesman.smirnov@gmail.com1-0/+1
Add missing pointer shift for the 'default' case. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Tony Cheneau <tony.cheneau+zigbeedev@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-256lowpan: read data from skb safelyalex.bluesman.smirnov@gmail.com1-32/+38
Check if skb buffer can pull requested amount of bytes and return an error in opposite case. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16ieee802154: interface type to be addedalex.bluesman.smirnov@gmail.com1-1/+8
This stack implementation distinguishes several types of slave interfaces. Another parameter to 'add_iface_' function is added to clarify the interface type is going to be registered. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+38
Conflicts: drivers/net/ethernet/intel/e1000e/param.c drivers/net/wireless/iwlwifi/iwl-agn-rx.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c drivers/net/wireless/iwlwifi/iwl-trans.h Resolved the iwlwifi conflict with mainline using 3-way diff posted by John Linville and Stephen Rothwell. In 'net' we added a bug fix to make iwlwifi report a more accurate skb->truesize but this conflicted with RX path changes that happened meanwhile in net-next. In e1000e a conflict arose in the validation code for settings of adapter->itr. 'net-next' had more sophisticated logic so that logic was used. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-266lowpan: duplicate definition of IEEE802154_ALENalex.bluesman.smirnov@gmail.com2-5/+2
The same macros is defined in 'include/net/af_ieee802154.h' and is called IEEE802154_ADDR_LEN. No need another one, so remove it. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-266lowpan: move frame allocation code to a separate functionalex.bluesman.smirnov@gmail.com1-33/+48
Separate frame allocation routine from data processing function. This makes code more human readable and easier for understanding. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-266lowpan: add missing spin_lock_init()alex.bluesman.smirnov@gmail.com1-0/+2
Add missing spin_lock_init() for frames list lock. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-266lowpan: clean up fragments list if module unloadedalex.bluesman.smirnov@gmail.com1-2/+11
Clean all the pending fragments and relative timers if 6lowpan link is going to be deleted. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-266lowpan: fix segmentation fault caused by mlme requestalex.bluesman.smirnov@gmail.com1-0/+25
Add nescesary mlme callbacks to satisfy "iz list" request from user space. Due to 6lowpan device doesn't have its own phy, mlme implemented as a pipe to a real phy to which 6lowpan is attached. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15net: cleanup unsigned to unsigned intEric Dumazet3-5/+5
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02ieee802154: Stop using NLA_PUT*().David S. Miller2-90/+85
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22net/ieee802154/6lowpan.c: reuse eth_mac_addr()Danny Kukawka1-14/+2
Use eth_mac_addr() for .ndo_set_mac_address, remove lowpan_set_address since it do currently the same as eth_mac_addr(). Additional advantage: eth_mac_addr() already checks if the given address is valid Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-18net: Remove all uses of LL_ALLOCATED_SPACEHerbert Xu2-4/+10
net: Remove all uses of LL_ALLOCATED_SPACE The macro LL_ALLOCATED_SPACE was ill-conceived. It applies the alignment to the sum of needed_headroom and needed_tailroom. As the amount that is then reserved for head room is needed_headroom with alignment, this means that the tail room left may be too small. This patch replaces all uses of LL_ALLOCATED_SPACE with the macro LL_RESERVED_SPACE and direct reference to needed_tailroom. This also fixes the problem with needed_headroom changing between allocating the skb and reserving the head room. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-166LoWPAN: double free in lowpan_fragment_xmit()Dan Carpenter1-3/+0
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb() in lowpan_fragment_xmit() is a double free. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-146LoWPAN: UDP header decompressionalex.bluesman.smirnov@gmail.com1-1/+60
This patch provides possibility to decompress UDP headers. Derived from Contiki OS. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-146LoWPAN: UDP header compressionalex.bluesman.smirnov@gmail.com2-4/+52
This patch adds support for UDP header compression. Derived from Contiki OS. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-146LoWPAN: set proper netdev flagsalex.bluesman.smirnov@gmail.com1-2/+1
This patch fixes settings for device initialization which makes possible to use NDISC and TCP. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-146LoWPAN: disable debugging by defaultalex.bluesman.smirnov@gmail.com1-2/+0
This patch disables debug output enabled by default. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-146LoWPAN: add fragmentation supportalex.bluesman.smirnov@gmail.com2-4/+274
This patch adds support for frame fragmentation. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-156LoWPAN: fix skb_copy callalex.bluesman.smirnov@gmail.com1-8/+9
This patch fixes 2 issues in lowpan_skb_deliver function: 1. Check for return status of skb_copy call; 2. Use skb_copy with proper GFP flag, drop check for non-interrupt context. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-156LoWPAN: call dev_put() on error in lowpan_newlink()Dan Carpenter1-1/+4
We should release the dev_hold() on error before returning here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-156LoWPAN: use the _safe version of list_for_eachDan Carpenter1-1/+3
When we kfree(entry) that causes a use-after-free bug so we have to use list_for_each_entry_safe() safe here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-156LoWPAN: use kfree_skb() instead of kfree()Dan Carpenter1-1/+1
Use kfree_skb() to free sbk_buffs. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24IEEE802.15.4: 6LoWPAN basic supportAlexander Smirnov4-3/+1108
This patch provides base support for transmission of IPv6 packets as well as the formation of IPv6 link-local addresses and statelessly autoconfigured addresses on top of IEEE 802.15.4 networks. For more information please look at the RFC4944 "Compression Format for IPv6 Datagrams in Low Power and Losst Networks (6LoWPAN). Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-30ieee802154: free skb buffer if dev isn't runningAlexander Smirnov1-1/+1
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-30ieee802154: it's IEEE 802.15.4, not ZigBeeDmitry Eremin-Solenikov1-1/+1
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-30ieee802154: support specifying hw address for created devicesDmitry Eremin-Solenikov1-0/+31
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2011-06-13ieee802154: Don't leak memory in ieee802154_nl_fill_phyJesper Juhl1-1/+2
In net/ieee802154/nl-phy.c::ieee802154_nl_fill_phy() I see two small issues. 1) If the allocation of 'buf' fails we may just as well return -EMSGSIZE directly rather than jumping to 'out:' and do a pointless kfree(0). 2) We do not free 'buf' unless we jump to one of the error labels and this leaks memory. This patch should address both. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-04-12ieee802154: Remove hacked CFLAGS in net/ieee802154/MakefileDavid S. Miller1-2/+0
It adds -Wall (which the kernel carefully controls already) and of all things -DDEBUG (which should be set by other means if desired, please we have dynamic-debug these days). Kill this noise. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-08net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()Eric Dumazet1-3/+3
Le dimanche 05 décembre 2010 à 09:19 +0100, Eric Dumazet a écrit : > Hmm.. > > If somebody can explain why RTNL is held in arp_ioctl() (and therefore > in arp_req_delete()), we might first remove RTNL use in arp_ioctl() so > that your patch can be applied. > > Right now it is not good, because RTNL wont be necessarly held when you > are going to call arp_invalidate() ? While doing this analysis, I found a refcount bug in llc, I'll send a patch for net-2.6 Meanwhile, here is the patch for net-next-2.6 Your patch then can be applied after mine. Thanks [PATCH] net: RCU conversion of dev_getbyhwaddr() and arp_ioctl() dev_getbyhwaddr() was called under RTNL. Rename it to dev_getbyhwaddr_rcu() and change all its caller to now use RCU locking instead of RTNL. Change arp_ioctl() to use RCU instead of RTNL locking. Note: this fix a dev refcount bug in llc Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-23ieee802154: Fix possible NULL pointer dereference in wpan_phy_allocDenis Kirjanov1-1/+6
Check for NULL pointer after kzalloc Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26ieee802154: Fix oops during ieee802154_sock_ioctlStefan Schmidt1-0/+3
Trying to run izlisten (from lowpan-tools tests) on a device that does not exists I got the oops below. The problem is that we are using get_dev_by_name without checking if we really get a device back. We don't in this case and writing to dev->type generates this oops. [Oops code removed by Dmitry Eremin-Solenikov] If possible this patch should be applied to the current -rc fixes branch. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+3
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) smc91c92_cs: fix the problem of "Unable to find hardware address" r8169: clean up my printk uglyness net: Hook up cxgb4 to Kconfig and Makefile cxgb4: Add main driver file and driver Makefile cxgb4: Add remaining driver headers and L2T management cxgb4: Add packet queues and packet DMA code cxgb4: Add HW and FW support code cxgb4: Add register, message, and FW definitions netlabel: Fix several rcu_dereference() calls used without RCU read locks bonding: fix potential deadlock in bond_uninit() net: check the length of the socket address passed to connect(2) stmmac: add documentation for the driver. stmmac: fix kconfig for crc32 build error be2net: fix bug in vlan rx path for big endian architecture be2net: fix flashing on big endian architectures be2net: fix a bug in flashing the redboot section bonding: bond_xmit_roundrobin() fix drivers/net: Add missing unlock net: gianfar - align BD ring size console messages net: gianfar - initialize per-queue statistics ...
2010-04-01net: check the length of the socket address passed to connect(2)Changli Gao1-0/+3
check the length of the socket address passed to connect(2). Check the length of the socket address passed to connect(2). If the length is invalid, -EINVAL will be returned. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/bluetooth/l2cap.c | 3 ++- net/bluetooth/rfcomm/sock.c | 3 ++- net/bluetooth/sco.c | 3 ++- net/can/bcm.c | 3 +++ net/ieee802154/af_ieee802154.c | 3 +++ net/ipv4/af_inet.c | 5 +++++ net/netlink/af_netlink.c | 3 +++ 7 files changed, 20 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo7-0/+7
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-11-25net: use net_eq to compare netsOctavian Purdila1-1/+1
Generated with the following semantic patch @@ struct net *n1; struct net *n2; @@ - n1 == n2 + net_eq(n1, n2) @@ struct net *n1; struct net *n2; @@ - n1 != n2 + !net_eq(n1, n2) applied over {include,net,drivers/net}. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-14Merge branch 'for-next' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2009-11-13ieee802154: make wpan-phy class registration to subsys_initcallDmitry Eremin-Solenikov1-1/+1
Move ieee802154 initialisation to subsys_initcall call, so that wpan-phy class is initialised before all devices (thus saving us from oops during bootup). Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06Merge branch 'for-next' of ↵David S. Miller7-592/+1118
git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2009-11-06ieee802154: add support for creation/removal of logic interfacesDmitry Eremin-Solenikov1-0/+156
Add support for two more NL802154 commands: ADD_IFACE and DEL_IFACE, thus allowing creation and removal of logic WPAN interfaces on the top of wpan-phy. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06ieee802154: add PHY_NAME to LIST_IFACE command resultsDmitry Eremin-Solenikov1-0/+8
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06ieee802154: add two nl802154 helpersDmitry Eremin-Solenikov2-0/+38
Add two nl802154 helpers: one for starting a reply message, one for sending. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06ieee802154: add LIST_PHY command supportDmitry Eremin-Solenikov4-1/+195
Add nl802154 command to get information about PHY's present in the system. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06ieee802154: split away MAC commands implementationDmitry Eremin-Solenikov4-595/+669
Move all mac-related stuff to separate file so that ieee802154/netlink.c contains only generic code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06ieee802154: merge nl802154 and wpan-class in single moduleDmitry Eremin-Solenikov3-12/+24
There is no real need to have ieee802154 interfaces separate into several small modules, as neither of them has it's own use. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06wpan-phy: follow usual patter of devices registrationDmitry Eremin-Solenikov1-3/+1
Follow the usual pattern of devices registration by adding new function (wpan_phy_set_dev) that sets child->parent relationship and removing parent argument from wpan_phy_register call. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 05:34:11 +0000