summaryrefslogtreecommitdiffstats
path: root/net/ieee802154/rdev-ops.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-30nl802154: add support for security layerAlexander Aring1-0/+109
This patch adds support for accessing mac802154 llsec implementation over nl802154. I added for a new Kconfig entry to provide this functionality CONFIG_IEEE802154_NL802154_EXPERIMENTAL. This interface is still in development. It provides to change security parameters and add/del/dump entries of security tables. Later we can add also a get to get an entry by unique identifier. Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-10ieee802154: add ack request default handlingAlexander Aring1-0/+13
This patch introduce a new mib entry which isn't part of 802.15.4 but useful as default behaviour to set the ack request bit or not if we don't know if the ack request bit should set. This is currently used for stacks like IEEE 802.15.4 6LoWPAN. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-07-23cfg802154: add PM hooksVarka Bhadram1-0/+20
This patch help to implement suspend/resume in mac802154, these hooks will be run before the device is suspended and after it resumes. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-27nl802154: add support to set cca ed levelAlexander Aring1-0/+11
This patch adds support for setting the current cca ed level value over nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-27ieee802154: add set transmit power supportVarka Bhadram1-0/+12
This patch adds transmission power setting support for IEEE-802.15.4 devices via nl802154. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30cfg802154: pass name_assign_type to rdev_add_virtual_intf()Varka Bhadram1-3/+7
This code is based on commit 6bab2e19c5ffd ("cfg80211: pass name_assign_type to rdev_add_virtual_intf()") This will expose in sysfs whether the ifname of a IEEE-802.15.4 device is set by userspace or generated by the kernel. We are using two types of name_assign_types o NET_NAME_ENUM: Default interface name provided by kernel o NET_NAME_USER: Interface name provided by user. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-04-30ieee802154: Add trace events for rdev->opsGuido Günther1-11/+66
Enabling tracing via echo 1 > /sys/kernel/debug/tracing/events/cfg802154/enable enables event tracing like iwpan dev wpan0 set pan_id 0xbeef cat /sys/kernel/debug/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:1 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | iwpan-2663 [000] .... 170.369142: 802154_rdev_set_pan_id: phy0, wpan_dev(1), pan id: 0xbeef iwpan-2663 [000] .... 170.369177: 802154_rdev_return_int: phy0, returned: 0 Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-19nl802154: introduce support for cca settingsAlexander Aring1-0/+7
This patch adds support for setting cca parameters via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: fix byteorder for short address and panidAlexander Aring1-2/+2
This patch changes the byteorder handling for short and panid handling. We now except to get little endian in nl802154 for these attributes. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: add del interface commandAlexander Aring1-0/+7
This patch adds support for deleting a wpan interface via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: setting extended address while iface addAlexander Aring1-2/+3
This patch adds support for setting an extended address while registration a new interface. If ieee802154_is_valid_extended_addr getting as parameter and invalid extended address then the perm address is fallback. This is useful to make some default handling while for example default registration of a wpan interface while phy registration. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17ieee802154: add new interface commandAlexander Aring1-0/+7
This patch adds a new nl802154 command for adding a new interface according to a wpan phy via nl802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-17mac802154: remove const for non pointer in rdev-opsAlexander Aring1-9/+5
This patches removes the const keyword in variables which are non pointers. There is no sense to declare call by value parameters as const. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add lbt setting supportAlexander Aring1-0/+7
This patch adds support for setting listen before transmit mode via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add max frame retries setting supportAlexander Aring1-0/+9
This patch add support for setting mac frame retries setting via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add max csma backoffs setting supportAlexander Aring1-0/+9
This patch add support for max csma backoffs setting via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add backoff exponent setting supportAlexander Aring1-0/+9
This patch adds support for setting backoff exponents via nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add short_addr setting supportAlexander Aring1-0/+7
This patch adds support for setting short address via nl802154 framework. Also added a comment because a 0xffff seems to be valid address that we don't have a short address. This is a valid setting but we need more checks in upper layers to don't allow this address as source address. Also the current netlink interface doesn't allow to set the short_addr to 0xffff. Same for the 0xfffe short address which describes a not allocated short address. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add pan_id setting supportAlexander Aring1-0/+7
This patch adds support for setting pan_id via nl802154 framework. Adding a comment because setting 0xffff as pan_id seems to be valid setting. The pan_id 0xffff as source pan is invalid. I am not sure now about this setting but for the current netlink interface this is an invalid setting, so we do the same now. Maybe we need to change that when we have coordinator support and association support. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-12ieee820154: add channel set supportAlexander Aring1-0/+7
This patch adds page and channel setting support to nl802154 framework. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02cfg802154: convert deprecated iface add and delAlexander Aring1-0/+23
This patch removes the wpan_phy callbacks for add and del an interface on a phy. Instead we introduce deprecated cfg802154 callbacks for this. Furthermore we introduce a new netlink interface nl802154 which use different callbacks. The deprecated function is to have a backwards compatibility with the current netlink interface. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>