summaryrefslogtreecommitdiffstats
path: root/net/dsa
AgeCommit message (Collapse)AuthorFilesLines
2018-04-08net: dsa: Discard frames from unused portsAndrew Lunn1-1/+7
The Marvell switches under some conditions will pass a frame to the host with the port being the CPU port. Such frames are invalid, and should be dropped. Not dropping them can result in a crash when incrementing the receive statistics for an invalid port. Reported-by: Chris Healy <cphealy@gmail.com> Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12net: dsa: Fix dsa_is_user_port() test inversionFlorian Fainelli1-1/+1
During the conversion to dsa_is_user_port(), a condition ended up being reversed, which would prevent the creation of any user port when using the legacy binding and/or platform data, fix that. Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04dsa: Pass the port to get_sset_count()Andrew Lunn2-3/+3
By passing the port, we allow different ports to have different statistics. This is useful since some ports have SERDES interfaces with their own statistic counters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14net: dsa: forward timestamping callbacks to switch driversBrandon Streiff2-0/+66
Forward the rx/tx timestamp machinery from the dsa infrastructure to the switch driver. On the rx side, defer delivery of skbs until we have an rx timestamp. This mimicks the behavior of skb_defer_rx_timestamp. On the tx side, identify PTP packets, clone them, and pass them to the underlying switch driver before we transmit. This mimicks the behavior of skb_tx_timestamp. Adjusted txstamp API to keep the allocation and freeing of the clone in the same central function by Richard Cochran Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14net: dsa: forward hardware timestamping ioctls to switch driverBrandon Streiff1-0/+29
This patch adds support to the dsa slave network device so that switch drivers can implement the SIOC[GS]HWTSTAMP ioctls and the ethtool timestamp-info interface. Signed-off-by: Brandon Streiff <brandon.streiff@ni.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23net: dsa: Support internal phy on 'cpu' portSebastian Reichel4-32/+86
This adds support for enabling the internal PHY for a 'cpu' port. It has been tested on GE B850v3, B650v3 and B450v3, which have a built-in MV88E6240 switch hardwired to a PCIe based network card. On these machines the internal PHY of the i210 network card and the Marvell switch are connected to each other and must be enabled for properly using the switch. While the i210 PHY will be enabled when the network interface is enabled, the switch's port is not exposed as network interface. Additionally the mv88e6xxx driver resets the chip during probe, so the PHY is disabled without this patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-05net: dsa: Move padding into Broadcom taggerFlorian Fainelli1-0/+12
Instead of having the different master network device drivers potentially used by DSA/Broadcom tags, move the padding necessary for the switches to accept short packets where it makes most sense: within tag_brcm.c. This avoids multiplying the number of similar commits to e.g: bgmac, bcmsysport, etc. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02net: dsa: Fix dsa_legacy_register() return valueFlorian Fainelli1-1/+1
We need to make the dsa_legacy_register() stub return 0 in order for dsa_init_module() to successfully register and continue registering the ETH_P_XDSA packet handler. Fixes: 2a93c1a3651f ("net: dsa: Allow compiling out legacy support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Three sets of overlapping changes, two in the packet scheduler and one in the meson-gxl PHY driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: dsa: mediatek: combine MediaTek tag with VLAN tagSean Wang1-9/+29
In order to let MT7530 switch can recognize well those egress packets having both special tag and VLAN tag, the information about the special tag should be carried on the existing VLAN tag. On the other hand, it's unnecessary for extra handling for ingress packets when VLAN tag is present since it is able to put the VLAN tag after the special tag and then follow the existing way to parse. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net: remove duplicate includesPravin Shedge1-1/+0
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: dsa: Allow compiling out legacy supportFlorian Fainelli5-21/+40
Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out support for the old platform device and Device Tree binding registration. Support for these configurations is scheduled to be removed in 4.17. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-06act_mirred: get rid of tcfm_ifindex from struct tcf_mirredCong Wang1-4/+1
tcfm_dev always points to the correct netdev and we already hold a refcnt, so no need to use tcfm_ifindex to lookup again. If we would support moving target netdev across netns, using pointer would be better than ifindex. This also fixes dumping obsolete ifindex, now after the target device is gone we just dump 0 as ifindex. Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05net: dsa: assign a CPU port to DSA portVivien Didelot1-1/+1
DSA ports also need to have a dedicated CPU port assigned to them, because they need to know where to egress frames targeting the CPU, e.g. To_Cpu frames received on a Marvell Tag port. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: support cross-chip FDB operationsVivien Didelot1-10/+4
When a MAC address is added to or removed from a switch port in the fabric, the target switch must program its port and adjacent switches must program their local DSA port used to reach the target switch. For this purpose, use the dsa_towards_port() helper to identify the local switch port which must be programmed. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: add switch mdb bitmap functionsVivien Didelot1-15/+33
This patch brings no functional changes. It moves out the MDB code iterating on a multicast group into new dsa_switch_mdb_{prepare,add}_bitmap() functions. This gives us a better isolation of the two switchdev phases. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: add switch vlan bitmap functionsVivien Didelot1-15/+34
This patch brings no functional changes. It moves out the VLAN code iterating on a list of VLAN members into new dsa_switch_vlan_{prepare,add}_bitmap() functions. This gives us a better isolation of the two switchdev phases. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: remove trans argument from mdb opsVivien Didelot1-2/+2
The DSA switch MDB ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from MDB prepare and add operations. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-02net: dsa: remove trans argument from vlan opsVivien Didelot1-2/+2
The DSA switch VLAN ops pass the switchdev_trans structure down to the drivers, but no one is using them and they aren't supposed to anyway. Remove the trans argument from VLAN prepare and add operations. At the same time, fix the following checkpatch warning: WARNING: line over 80 characters #74: FILE: drivers/net/dsa/dsa_loop.c:177: + const struct switchdev_obj_port_vlan *vlan) Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-26net: dsa: fix 'increment on 0' warningVivien Didelot1-11/+14
Setting the refcount to 0 when allocating a tree to match the number of switch devices it holds may cause an 'increment on 0; use-after-free', if CONFIG_REFCOUNT_FULL is enabled. To fix this, do not decrement the refcount of a newly allocated tree, increment it when an already allocated tree is found, and decrement it after the probing of a switch, as done with the previous behavior. At the same time, make dsa_tree_get and dsa_tree_put accept a NULL argument to simplify callers, and return the tree after incrementation, as most kref users like of_node_get and of_node_put do. Fixes: 8e5bf9759a06 ("net: dsa: simplify tree reference counting") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: dsa: lan9303: calculate offload_fwd_mark from tagEgil Hjelmeland1-16/+8
The lan9303 set bits in the host CPU tag indicating if a ingress frame is a trapped IGMP or STP frame. Use these bits to calculate skb->offload_fwd_mark more efficiently. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: dsa: Fix dependencies on bridgeAndrew Lunn1-0/+1
DSA now uses one of the symbols exported by the bridge, br_vlan_enabled(). This has a stub, if the bridge is not enabled. However, if the bridge is enabled, we cannot have DSA built in and the bridge as a module, otherwise we get undefined symbols at link time: net/dsa/port.o: In function `dsa_port_vlan_add': net/dsa/port.c:255: undefined reference to `br_vlan_enabled' net/dsa/port.o: In function `dsa_port_vlan_del': net/dsa/port.c:270: undefined reference to `br_vlan_enabled' Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Support prepended Broadcom tagFlorian Fainelli5-7/+40
Add a new type: DSA_TAG_PROTO_PREPEND which allows us to support for the 4-bytes Broadcom tag that we already support, but in a format where it is pre-pended to the packet instead of located between the MAC SA and the Ethertyper (DSA_TAG_PROTO_BRCM). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: tag_brcm: Prepare for supporting prepended tagFlorian Fainelli1-11/+34
In preparation for supporting the same Broadcom tag format, but instead of inserted between the MAC SA and EtherType, prepended to the Ethernet frame, restructure the code a little bit to make that possible and take an offset parameter. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-13net: dsa: Pass a port to get_tag_protocol()Florian Fainelli2-2/+2
A number of drivers want to check whether the configured CPU port is a possible configuration for enabling tagging, pass down the CPU port number so they verify that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
2017-11-11net: dsa: lan9303: Clear offload_fwd_mark for IGMPEgil Hjelmeland1-0/+13
Now that IGMP packets no longer is flooded in HW, we want the SW bridge to forward packets based on bridge configuration. To make that happen, IGMP packets must have skb->offload_fwd_mark = 0. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: {e}dsa: set offload_fwd_mark on received packetsAndrew Lunn2-0/+4
The software bridge needs to know if a packet has already been bridged by hardware offload to ports in the same hardware offload, in order that it does not re-flood them, causing duplicates. This is particularly true for broadcast and multicast traffic which the host has requested. By setting offload_fwd_mark in the skb the bridge will only flood to ports in other offloads and other netifs. Set this flag in the DSA and EDSA tag driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: Fix SWITCHDEV_ATTR_ID_PORT_PARENT_IDAndrew Lunn1-2/+3
SWITCHDEV_ATTR_ID_PORT_PARENT_ID is used by the software bridge when determining which ports to flood a packet out. If the packet originated from a switch, it assumes the switch has already flooded the packet out the switches ports, so the bridge should not flood the packet itself out switch ports. Ports on the same switch are expected to return the same parent ID when SWITCHDEV_ATTR_ID_PORT_PARENT_ID is called. DSA gets this wrong with clusters of switches. As far as the software bridge is concerned, the cluster is all one switch. A packet from any switch in the cluster can be assumed to have been flooded as needed out of all ports of the cluster, not just the switch it originated from. Hence all ports of a cluster should return the same parent. The old implementation did not, each switch in the cluster had its own ID. Also wrong was that the ID was not unique if multiple DSA instances are in operation. Use the tree ID as the parent ID, which is the same for all switches in a cluster and unique across switch clusters. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: return after vlan prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the VLAN addition on every ports member of a it. Fix this. Fixes: 1ca4aa9cd4cc ("net: dsa: check VLAN capability of every switch") Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-11net: dsa: return after mdb prepare phaseVivien Didelot1-0/+2
The current code does not return after successfully preparing the MDB addition on every ports member of a multicast group. Fix this. Fixes: a1a6b7ea7f2d ("net: dsa: add cross-chip multicast support") Reported-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: Don't add vlans when vlan filtering is disabledAndrew Lunn1-2/+8
The software bridge can be build with vlan filtering support included. However, by default it is turned off. In its turned off state, it still passes VLANs via switchev, even though they are not to be used. Don't pass these VLANs to the hardware. Only do so when vlan filtering is enabled. This fixes at least one corner case. There are still issues in other corners, such as when vlan_filtering is later enabled. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: switch: Don't add CPU port to an mdb by defaultAndrew Lunn1-1/+1
Now that the host indicates when a multicast group should be forwarded from the switch to the host, don't do it by default. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: add more const attributesAndrew Lunn2-5/+5
The notify mechanism does not need to modify the port it is notifying. So make the parameter const. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-10net: dsa: slave: Handle switchdev host mdb add/delAndrew Lunn1-0/+13
Add code to handle switchdev host mdb add/del. Since DSA uses one of the switch ports as a transport to the host, we just need to add an MDB on this port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: rename probe and remove switch functionsVivien Didelot1-4/+4
This commit brings no functional changes. It gets rid of the underscore prefixed _dsa_register_switch and _dsa_unregister_switch functions in favor of dsa_switch_probe() which parses and adds a switch to a tree and dsa_switch_remove() which removes a switch from a tree. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup a tree when adding a switch to itVivien Didelot1-19/+16
Now that the tree setup is centralized, we can simplify the code a bit more by setting up or tearing down the tree directly when adding or removing a switch to/from it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup routing tableVivien Didelot1-71/+37
The *_complete() functions take too much arguments to do only one thing: they try to fetch the dsa_port structures corresponding to device nodes under the "link" list property of DSA ports, and use them to setup the routing table of switches. This patch simplifies them by providing instead simpler dsa_{port,switch,tree}_setup_routing_table functions which return a boolean value, true if the tree is complete. dsa_tree_setup_routing_table is called inside dsa_tree_setup which simplifies the switch registering function as well. A switch's routing table is now initialized before its setup. This also makes dsa_port_is_valid obsolete, remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: use of_for_each_phandleVivien Didelot1-11/+8
The OF code provides a of_for_each_phandle() helper to iterate over phandles. Use it instead of arbitrary iterating ourselves over the list of phandles hanging to the "link" property of the port's device node. The of_phandle_iterator_next() helper calls of_node_put() itself on it.node. Thus We must only do it ourselves if we break the loop. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: add find port by node helperVivien Didelot1-20/+17
Instead of having two dsa_ds_find_port_dn (which returns a bool) and dsa_dst_find_port_dn (which returns a switch) functions, provide a more explicit dsa_tree_find_port_by_node function which returns a matching port. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown portsVivien Didelot1-114/+59
The dsa_dsa_port_apply and dsa_cpu_port_apply functions do exactly the same. The dsa_user_port_apply function does not try to register a fixed link but try to create a slave. This commit factorizes and scopes all that in two convenient dsa_port_setup and dsa_port_teardown functions. It won't hurt to register a devlink_port for unused port as well. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown switchesVivien Didelot1-23/+39
This patches brings no functional changes. It removes the unused dst argument from the dsa_ds_apply and dsa_ds_unapply functions, rename them to dsa_switch_setup and dsa_switch_teardown for a more explicit scope. This clarifies the steps of the setup or teardown of a switch fabric. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown treeVivien Didelot1-14/+18
This commit provides better scope for the DSA tree setup and teardown functions. It renames the "applied" bool to "setup" and print a message when the tree is setup, as it is done during teardown. At the same time, check dst->setup in dsa_tree_setup, where it is set to true. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown master deviceVivien Didelot4-39/+51
Add DSA helpers to setup and teardown a master net device wired to its CPU port. This centralizes the dsa_ptr assignment. This also makes the master ethtool helpers static at the same time. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: setup and teardown default CPU portVivien Didelot1-85/+68
The dsa_dst_parse function called just before dsa_dst_apply does not parse the tree but does only one thing: it assigns the default CPU port to dst->cpu_dp and to each user ports. This patch simplifies this by calling a dsa_tree_setup_default_cpu function at the beginning of dsa_dst_apply directly. A dsa_port_is_user helper is added for convenience. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-09net: dsa: constify cpu_dp member of dsa_portVivien Didelot1-1/+1
A DSA port has a dedicated CPU port assigned to it, stored in the cpu_dp member. It is not meant to be modified by a port, thus make it const. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-08net: dsa: lan9303: Adjust indentingEgil Hjelmeland1-1/+1
Remove scripts/checkpatch.pl CHECKs by adjusting indenting. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05net: dsa: resolve tagging protocol at parse timeVivien Didelot1-16/+15
Extend the dsa_port_parse_cpu() function to resolve the tagging protocol at port parsing time, instead of waiting for the whole tree to be complete. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05net: dsa: add one port parsing function per typeVivien Didelot1-20/+36
Add dsa_port_parse_user, dsa_port_parse_dsa and dsa_port_parse_cpu functions to factorize the code shared by both OF and pdata parsing. They don't do much for the moment but will be extended later to support tagging protocol resolution for example. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>