summaryrefslogtreecommitdiffstats
path: root/net/dsa
AgeCommit message (Collapse)AuthorFilesLines
2016-01-07dsa: Register netdev before phyAndrew Lunn1-7/+7
When the phy is connected, an info message is printed. If the netdev it is attached to has not been registered yet, the name 'uninitialised' in the output. By registering the netdev first, then connecting they phy, we can avoid this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn1-1/+2
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn1-1/+1
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn1-3/+2
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: move dsa slave destroy code to slave.cNeil Armstrong3-2/+13
Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by: Frode Isaksen <fisaksen@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: Add missing master netdev dev_put() callsNeil Armstrong1-1/+5
Upon probe failure or unbinding, add missing dev_put() calls. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: cleanup resources upon module removalNeil Armstrong1-0/+8
Make sure that we unassign the master_netdev dsa_ptr to make the packet processing go through the regular Ethernet receive path. Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-07net: dsa: remove DSA link pollingNeil Armstrong1-43/+0
Since no more DSA driver uses the polling callback, and since the phylib handles the link detection, remove the link polling work and timer code. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-24net: dsa: include gpio consumer header fileArnd Bergmann1-0/+1
After the introduction of the switch gpio reset API, I'm getting build errors in configurations that disable CONFIG_GPIOLIB: net/dsa/dsa.c:783:16: error: implicit declaration of function 'gpio_to_desc' [-Werror=implicit-function-declaration] The reason is that linux/gpio/consumer.h is not automatically included without gpiolib support. This adds an explicit #include statement to make it compile in all configurations. The reset functionality will not work without gpiolib, which is what you get when disabling the feature. As far as I can tell, gpiolib is supported on all architectures on which you can have DSA at the moment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cc30c16344fc ("net: dsa: Add support for a switch reset gpio") Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-23net: dsa: Add support for a switch reset gpioAndrew Lunn1-0/+17
Some boards have a gpio line tied to the switch reset pin. Allow this gpio to be retrieved from the device tree, and take the switch out of reset before performing the probe. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01net: dsa: use switchdev obj for VLAN add/del opsVivien Didelot1-20/+9
Simplify DSA by pushing the switchdev objects for VLAN add and delete operations down to its drivers. Currently only mv88e6xxx is affected. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22net: dsa: remove port_fdb_getnextVivien Didelot1-24/+1
No driver implements port_fdb_getnext anymore, and port_fdb_dump is preferred anyway, so remove this function from DSA. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22net: dsa: add port_fdb_dump functionVivien Didelot1-0/+3
Not all switch chips support a Get Next operation to iterate on its FDB. So add a more simple port_fdb_dump function for them. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-11/+59
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: remove pointers from switchdev objectsJiri Pirko1-1/+1
When object is used in deferred work, we cannot use pointers in switchdev object structures because the memory they point at may be already used by someone else. So rather do local copy of the value. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15switchdev: make struct switchdev_attr parameter const for attr_set callsJiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-13net: dsa: do not warn unsupported bridge opsVivien Didelot1-1/+1
A DSA driver may not provide the port_join_bridge and port_leave_bridge functions, so don't warn in such case. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: dsa: use switchdev obj in port_fdb_delVivien Didelot1-1/+1
For consistency with the FDB add operation, propagate the switchdev_obj_port_fdb structure in the DSA drivers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: dsa: push prepare phase in port_fdb_addVivien Didelot1-1/+1
Now that the prepare phase is pushed down to the DSA drivers, propagate it to the port_fdb_add function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-11net: dsa: add port_fdb_prepareVivien Didelot1-2/+5
Push the prepare phase for FDB operations down to the DSA drivers, with a new port_fdb_prepare function. Currently only mv88e6xxx is affected. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: exit probe if no switch were foundNeil Armstrong1-3/+16
If no switch were found in dsa_setup_dst, return -ENODEV and exit the dsa_probe cleanly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: switch to devm_ calls and remove kfree callsNeil Armstrong1-12/+5
Now the kfree calls exists in the the remove functions, remove them in all places except the of_probe functions and replace allocation calls with their devm_ counterparts. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: complete dsa_switch_destroyNeil Armstrong1-0/+37
When unbinding dsa, complete the dsa_switch_destroy to unregister the fixed link phy then cleanly unregister and destroy the net devices. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: add missing dsa_switch mdiobus removeNeil Armstrong1-0/+2
To prevent memory leakage on unbinding, add missing mdiobus unregister and unallocation calls. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: add missing kfree on removeNeil Armstrong1-1/+4
To prevent memory leakage on unbinding, add missing kfree calls. Includes minor cosmetic change to make patch clean. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07net: dsa: better error reportingRussell King2-10/+18
Add additional error reporting to the generic DSA code, so it's easier to debug when things go wrong. This was useful when initially bringing up 88e6176 on a new board. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: push object ID back to object structureJiri Pirko1-6/+3
Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: bring back switchdev_obj and use it as a generic object paramJiri Pirko1-14/+27
Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdbJiri Pirko1-3/+3
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlanJiri Pirko1-3/+3
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_*Jiri Pirko1-2/+2
To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_*Jiri Pirko1-6/+6
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: dsa: fix preparation of a port STP updateVivien Didelot1-3/+8
Because of the default 0 value of ret in dsa_slave_port_attr_set, a driver may return -EOPNOTSUPP from the commit phase of a STP state, which triggers a WARN() from switchdev. This happened on a 6185 switch which does not support hardware bridging. Fixes: 3563606258cf ("switchdev: convert STP update to switchdev attr set") Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: dsa: fix preparation of a port STP updateVivien Didelot1-3/+8
Because of the default 0 value of ret in dsa_slave_port_attr_set, a driver may return -EOPNOTSUPP from the commit phase of a STP state, which triggers a WARN() from switchdev. This happened on a 6185 switch which does not support hardware bridging. Reported-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: switchdev: abstract object in add/del opsVivien Didelot1-12/+8
Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: switchdev: pass callback to dump operationVivien Didelot1-12/+14
Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29net: switchdev: remove dev from switchdev_obj cbVivien Didelot1-2/+2
The net_device associated to a dump operation does not have to be passed to the callback. switchdev stores it in a superset struct, if needed. Also some drivers (such as DSA drivers) may not have easy access to it. This will simplify pushing the callback function down to the drivers. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-8/+35
Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25net: dsa: Set a "dsa" device_typeFlorian Fainelli1-0/+5
Provide a device_type information for slave network devices created by DSA, this is useful for user-space application to easily locate/search for devices of a specific kind. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: fix net_device refcountingRussell King1-1/+4
of_find_net_device_by_node() uses class_find_device() internally to lookup the corresponding network device. class_find_device() returns a reference to the embedded struct device, with its refcount incremented. Add a comment to the definition in net/core/net-sysfs.c indicating the need to drop this refcount, and fix the DSA code to drop this refcount when the OF-generated platform data is cleaned up and freed. Also arrange for the ref to be dropped when handling errors. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24net: dsa: fix of_mdio_find_bus() device refcount leakRussell King1-7/+31
Current users of of_mdio_find_bus() leak a struct device refcount, as they fail to clean up the reference obtained inside class_find_device(). Fix the DSA code to properly refcount the returned MDIO bus by: 1. taking a reference on the struct device whenever we assign it to pd->chip[x].host_dev. 2. dropping the reference when we overwrite the existing reference. 3. dropping the reference when we free the data structure. 4. dropping the initial reference we obtained after setting up the platform data structure, or on failure. In step 2 above, where we obtain a new MDIO bus, there is no need to take a reference on it as we would only have to drop it immediately after assignment again, iow: put_device(cd->host_dev); /* drop original assignment ref */ cd->host_dev = get_device(&mdio_bus_switch->dev); /* get our ref */ put_device(&mdio_bus_switch->dev); /* drop of_mdio_find_bus ref */ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24dsa: use prepare/commit switchdev transaction helpersJiri Pirko1-10/+5
The enum is going to disappear, use the helpers instead. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24switchdev: move transaction phase enum under transaction structureJiri Pirko1-8/+10
Before it disappears completely, move transaction phase enum under transaction structure and make attr/obj structures a bit cleaner. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24switchdev: introduce transaction item queue for attr_set and obj_addJiri Pirko1-2/+4
Now, the memory allocation in prepare/commit state is done separatelly in each driver (rocker). Introduce the similar mechanism in generic switchdev code, in form of queue. That can be used not only for memory allocations, but also for different items. Abort item destruction is handled as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24switchdev: rename "trans" to "trans_ph".Jiri Pirko1-4/+4
This is temporary, name "trans" will be used for something else and "trans_ph" will eventually disappear. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22net: dsa: Fix Marvell Egress Trailer checkNeil Armstrong1-1/+1
The Marvell Egress rx trailer check must be fixed to correctly detect bad bits in the third byte of the Eggress trailer as described in the Table 28 of the 88E6060 datasheet. The current code incorrectly omits to check the third byte and checks the fourth byte twice. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: dsa: Allow DSA and CPU ports to have a phy-mode propertyAndrew Lunn1-1/+7
It can be useful for DSA and CPU ports to have a phy-mode property, in particular to specify RGMII delays. Parse the property and set it in the fixed-link phydev. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: dsa: Allow configuration of CPU & DSA port speeds/duplexAndrew Lunn1-0/+37
By default, DSA and CPU ports are configured to the maximum speed the switch supports. However there can be use cases where the peer devices port is slower. Allow a fixed-link property to be used with the DSA and CPU port in the device tree, and use this information to configure the port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: dsa: Allow multi hop routes to be expressedAndrew Lunn1-10/+30
With more than two switches in a hierarchy, it becomes necessary to describe multi-hop routes between switches. The current binding does not allow this, although the older platform_data did. Extend the link property to be a list rather than a single phandle to a remote switch. It is then possible to express that a port should be used to reach more than one switch and the switch maybe more than one hop away. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: dsa: convert to using IFF_NO_QUEUEPhil Sutter1-1/+1
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 18:50:15 +0000