summaryrefslogtreecommitdiffstats
path: root/net/dccp
AgeCommit message (Collapse)AuthorFilesLines
2007-04-26[NET]: SPIN_LOCK_UNLOCKED cleanup in drivers/atm, netMilind Arun Choudhary1-1/+1
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Debug statements for Elapsed Time optionGerrit Renker1-2/+6
This prints the value of the parsed Elapsed Time when received via a Timestamp Echo option [RFC 4342, 13.3]. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Fix bug in the calculation of very low sending ratesGerrit Renker1-2/+2
This fixes an error in the calculation of t_ipi when X converges towards very low sending rates (between 1 and 64 bytes per second). Although this case may not sound likely, it can be reproduced by connecting, hitting enter (1 byte sent) and waiting for some time, during which the nofeedback timer halves the sending rate until finally it reaches the region 1..64 bytes/sec. Computing X is handled correctly (tested separately); but by dividing X _before_ entering the calculation of t_ipi, X becomes zero as a result. This in turn triggers a BUG condition caught in scaled_div(). Fixed by replacing with equivalent statement and explicit typecast for good measure. Calculation verified and effect of patch tested - reduced never below 1 byte per 64 seconds afterwards, i.e. not allowing divide-by-zero. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Use initial RTT sample from SYN exchangeGerrit Renker1-10/+21
The patch follows the following recommendation made in an erratum to RFC 4342: "Senders MAY additionally make use of other available RTT measurements, including those from the initial Request-Response packet exchange." It implements larger initial windows with regard to this inital RTT measurement, using the mechanism suggested in draft-ietf-dccp-rfc3448bis, section 4.2. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Sample RTT from SYN exchangeGerrit Renker2-0/+16
Function:
2007-04-25[CCID3]: Use function for RTT samplingGerrit Renker2-41/+11
This replaces the existing occurrences of RTT sampling with the use of the new function dccp_sample_rtt. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Provide function for RTT samplingGerrit Renker2-2/+48
A recurring problem, in particular in the CCID code, is that RTT samples from packets with timestamp echo and elapsed time options need to be taken. This service is provided via a new function dccp_sample_rtt in this patch. Furthermore, to protect against `insane' RTT samples, the sampled value is bounded between 100 microseconds and 4 seconds - for which u32 is sufficient. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Handle Idle and Application-Limited periodsGerrit Renker1-44/+40
This updates the code with regard to handling idle and application-limited periods as specified in [RFC 4342, 5.1]. Background:
2007-04-25[CCID3]: Wrap computation of RFC3390-initial rate into separate functionGerrit Renker1-7/+18
The CCID 3 and TFRC specs (RFC 4342, RFC 3448, draft-3448bis) make frequent reference to the computation of the RFC-3390 initial sending rate: 1. Initial sending rate when RTT is known (RFC 4342, p. 6) 2. Response to Idle/Application-Limited periods (RFC 4342, 5.1) This warrants putting the code into its own function, for later code reuse. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Remove build warnings for 64bitGerrit Renker1-5/+7
This clears the following sparc64 build warnings: 1) warning: format "%ld" expects type "long int", but argument 3 has type "suseconds_t" 2) warning: format "%llu" expects type "long long unsigned int", but argument 3 has type "__u64" Fixed by using typecast to unsigned. This is argued to be safe, since the quantities, after de-scaling (factor 2^6) fit all in u32. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: More to see in dccp_probeGerrit Renker1-7/+10
This adds a few more fields of interest to /proc/net/dccpprobe, the following output ensues: 1 2 3 4 5 6 7 8 9 10 11 sec.usec src:sport dst:dport size s rtt p X_calc X_recv X t_ipi Also made the formatting consistent. Scripts that go with this can be downloaded from http://139.133.210.30/users/gerrit/dccp/dccp_probe/ Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: More debug information for dccp_wait_for_ccidGerrit Renker1-1/+2
This adds more detail in the wait_for_ccid packet scheduling loop. In particular, it informs about (i) when delay is used and (ii) why a packet is discarded. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Always use debug-toggle parametersGerrit Renker1-4/+0
Currently debugging output (when configured) is automatically enabled when DCCP modules are compiled into the kernel rather than built as loadable modules. This is not necessary, since the module parameters in this case become kernel commandline parameters, e.g. DCCP or CCID3 debug output can be enabled for a static build by appending the following at the boot prompt: dccp.dccp_debug=1 dccp_ccid3.ccid3_debug=1 This patch therefore does away with the more complicated way of always enabling debug output for static builds Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Remove race condition and update t_ipi when `s' changesGerrit Renker1-23/+12
This: 1. removes a race condition in the access to the scheduled send time t_nom which results from allowing asynchronous r/w access to t_nom without locks; 2. updates the inter-packet interval t_ipi = s/X when `s' changes, following a suggestion by Ian McDonald. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: More verbose debuggingIan McDonald1-1/+12
This adds a few debugging statements to ccid3.c Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Fix use of invalid loss intervalsIan McDonald1-1/+1
This fixes a bug which uses an invalid comparison. The bug resulted in the use of invalid loss intervals. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Use MSS for larger initial windowsGerrit Renker1-5/+5
This improves the slow-start phase by using the MSS (as suggested in RFC 4342, sec. 5) instead of the packet size s. Also figured out that __u32 is ample resource enough. After applying, I got the following in the logs: ccid3_hc_tx_packet_recv: client(f7421700), s=6, MSS=1424, w_init=4380, R_sample=176us, X=24886363 Had the previous variant been used, w_init would have been as low as 24. Committer note: removed unneeded cast to unsigned long long that was causing a compiler warning on 64bit architectures. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Re-order CCID 3 source fileGerrit Renker1-44/+45
No code change at all. This splits ccid3.c into a RX and a TX section, so that the file has an organisation similar to the other ones (e.g. packet_history.{h,c}). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[CCID3]: Remove redundant `len' testGerrit Renker1-5/+2
Since CCID3 avoids sending 0-byte data packets (cf. ccid3_hc_tx_send_packet), testing for zero-payload length, as performed by ccid3_hc_tx_update_s, is redundant - hence removed by this patch. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Remove ambiguity in the way before48 is usedGerrit Renker1-2/+4
This removes two ambiguities in employing the new definition of before48, following the analysis on http://www.mail-archive.com/dccp@vger.kernel.org/msg01295.html (1) Updating GSR when P.seqno >= S.SWL With the old definition we did not update when P.seqno and S.SWL are 2^47 apart. To ensure the same behaviour as with the old definition, this is replaced with the equivalent condition dccp_delta_seqno(S.SWL, P.seqno) >= 0 (2) Sending SYNC when P.seqno >= S.OSR Here it is debatable whether the new definition causes an ambiguity: the case is similar to (1); and to have consistency with the case (1), we use the equivalent condition dccp_delta_seqno(S.OSR, P.seqno) >= 0 Detailed Justification
2007-04-25[DCCP]: Fix for follows48Gerrit Renker1-3/+1
The follows48 relation identifies whether 48-bit sequence number x is the direct successor of y. Currently, it does not handle cases of the following type correctly: follows48(0x(prefix)10000LL, 0x(prefix)0FFFFLL) where prefix is an arbitrary hex sequence of up to 7 digits. This is fixed by reusing the new dccp_delta_seqno function. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[DCCP]: Make `before' relation unambiguousGerrit Renker1-5/+2
Problem:
2007-04-25[DCCP]: Make dccp_delta_seqno return signed numbersGerrit Renker1-2/+5
Problem:
2007-04-25[DCCP]: 48-bit sequence number arithmeticGerrit Renker2-21/+28
This patch * organizes the sequence arithmetic functions into one corner of dccp.h * performs a small modification of dccp_set_seqno to make it more widely reusable (now it is safe to use any number, since it performs modulo-2^48 assignment) * adds functions and generic macros for 48-bit sequence arithmetic: --48 bit complement --modulo-48 addition and modulo-48 subtraction --dccp_inc_seqno now a special case of add48 Constants renamed following a suggestion by Arnaldo. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce icmp_hdr(), remove skb->h.icmphArnaldo Carvalho de Melo1-2/+2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6hArnaldo Carvalho de Melo1-15/+17
Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce ip_hdr(), remove skb->nh.iphArnaldo Carvalho de Melo1-19/+20
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[SK_BUFF]: Introduce skb_network_header()Arnaldo Carvalho de Melo1-4/+4
For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[TCP/DCCP/RANDOM]: Remove unused exports.Adrian Bunk1-2/+0
This patch removes the following not or no longer used exports: - drivers/char/random.c: secure_tcp_sequence_number - net/dccp/options.c: sysctl_dccp_feat_sequence_window - net/netlink/af_netlink.c: netlink_set_err Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-28[DCCP] getsockopt: Fix DCCP_SOCKOPT_[SEND,RECV]_CSCOVArnaldo Carvalho de Melo1-1/+3
We were only checking if there was enough space to put the int, but left len as specified by the (malicious) user, sigh, fix it by setting len to sizeof(val) and transfering just one int worth of data, the one asked for. Also check for negative len values. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[DCCP]: make dccp_write_xmit_timer() static againAdrian Bunk2-2/+1
dccp_write_xmit_timer() needlessly became global. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-09[DCCP]: Initialise write_xmit_timer also on passive socketsGerrit Renker3-16/+26
The TX CCID needs the write_xmit_timer for delaying packet sends. Previously this timer was only activated on active (connecting) sockets. This patch initialises the write_xmit_timer in sync with the other timers, i.e. the timer will be ready on any socket. This is used by applications with a listening socket which start to stream after receiving an initiation by the client. The write_xmit_timer is stopped when the application closes, as before. Was tested to work and to remove the timer bug reported on dccp@vger. Also moved timer initialisation into timer.c (static). Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-07[DCCP]: Revert patch which disables bidirectional modeGerrit Renker2-23/+5
This reverts an earlier patch which disabled bidirectional mode, meaning that a listening (passive) socket was not allowed to write to the other (active) end of the connection. This mode had been disabled when there were problems with CCID3, but it imposes a constraint on socket programming and thus hinders deployment. A change is included to ignore RX feedback received by the TX CCID3 module. Many thanks to Andre Noll for pointing out this issue. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-06[DCCP]: Set RTO for newly created child socketGerrit Renker1-1/+1
This mirrors a recent change in tcp_open_req_child, whereby the icsk_rto of the newly created child socket was not set (but rather on the parent socket). Same fix for DCCP. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-06[DCCP]: Correctly split CCID half connectionsGerrit Renker1-6/+6
This fixes a bug caused by a previous patch, which causes DCCP servers in LISTEN state to not receive packets. This patch changes the logic so that * servers in either LISTEN or OPEN state get the RX half connection packets * clients in OPEN state get the TX half connection packets Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-28[NET]: Fix kfree(skb)Patrick McHardy1-1/+1
Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-14[PATCH] sysctl: remove insert_at_head from register_sysctlEric W. Biederman1-1/+1
The semantic effect of insert_at_head is that it would allow new registered sysctl entries to override existing sysctl entries of the same name. Which is pain for caching and the proc interface never implemented. I have done an audit and discovered that none of the current users of register_sysctl care as (excpet for directories) they do not register duplicate sysctl entries. So this patch simply removes the support for overriding existing entries in the sys_sysctl interface since no one uses it or cares and it makes future enhancments harder. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Corey Minyard <minyard@acm.org> Cc: Neil Brown <neilb@suse.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jan Kara <jack@ucw.cz> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14[PATCH] sysctl: dccp: remove unnecessary insert_at_head flagEric W. Biederman1-1/+1
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct file_operations const 7Arjan van de Ven1-1/+1
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-10[NET] DCCP: Fix whitespace errors.YOSHIFUJI Hideaki14-78/+78
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08[NET]: change layout of ehash tableEric Dumazet1-2/+2
ehash table layout is currently this one : First half of this table is used by sockets not in TIME_WAIT state Second half of it is used by sockets in TIME_WAIT state. This is non optimal because of for a given hash or socket, the two chain heads are located in separate cache lines. Moreover the locks of the second half are never used. If instead of this halving, we use two list heads in inet_ehash_bucket instead of only one, we probably can avoid one cache miss, and reduce ram usage, particularly if sizeof(rwlock_t) is big (various CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC settings). So we still halves the table but we keep together related chains to speedup lookups and socket state change. In this patch I did not try to align struct inet_ehash_bucket, but a future patch could try to make this structure have a convenient size (a power of two or a multiple of L1_CACHE_SIZE). I guess rwlock will just vanish as soon as RCU is plugged into ehash :) , so maybe we dont need to scratch our heads to align the bucket... Note : In case struct inet_ehash_bucket is not a power of two, we could probably change alloc_large_system_hash() (in case it use __get_free_pages()) to free the unused space. It currently allocates a big zone, but the last quarter of it could be freed. Again, this should be a temporary 'problem'. Patch tested on ipv4 tcp only, but should be OK for IPV6 and DCCP. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08[DCCP]: Warning fixes.Andrew Morton1-2/+3
net/dccp/ccids/ccid3.c: In function `ccid3_hc_rx_packet_recv': net/dccp/ccids/ccid3.c:1007: warning: long int format, different type arg (arg 3) net/dccp/ccids/ccid3.c:1007: warning: long int format, different type arg (arg 4) opaque types must be suitably cast for printing. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-08[IPV4/IPV6]: Always wait for IPSEC SA resolution in socket contexts.David S. Miller2-2/+2
Do this even for non-blocking sockets. This avoids the silly -EAGAIN that applications can see now, even for non-blocking sockets in some cases (f.e. connect()). With help from Venkat Tekkirala. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-01-26[TCP]: Restore SKB socket owner setting in tcp_transmit_skb().David S. Miller1-2/+2
Revert 931731123a103cfb3f70ac4b7abfc71d94ba1f03 We can't elide the skb_set_owner_w() here because things like certain netfilter targets (such as owner MATCH) need a socket to be set on the SKB for correct operation. Thanks to Jan Engelhardt and other netfilter list members for pointing this out. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-13[DCCP] ccid3: return value in ccid3_hc_rx_calc_first_liIan McDonald1-3/+3
In a recent patch we introduced invalid return codes which will result in the opposite of what is intended (i.e. send more packets in face of peculiar network conditions). This fixes it by returning ~0 which means not calculated as per dccp_li_hist_calc_i_mean. Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-11[DCCP]: Whitespace cleanupsArnaldo Carvalho de Melo12-124/+136
That accumulated over the last months hackaton, shame on me for not using git-apply whitespace helping hand, will do that from now on. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-11[DCCP] ccid3: Fixup some type conversions related to rttsArnaldo Carvalho de Melo2-12/+12
Spotted by David Miller when compiling on sparc64, I reproduced it here on parisc64, that are the only platforms to define __kernel_suseconds_t as an 'int', all the others, x86_64 and x86 included typedef it as a 'long', but from the definition of suseconds_t it should just be an 'int' on platforms where it is >= 32bits, it would not require all the castings from suseconds_t to (int) when printking variables of this type, that are not needed on parisc64 and sparc64. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-11[DCCP] ccid3: BUG-FIX - conversion errorsGerrit Renker1-24/+30
This fixes conversion errors which arose by not properly type-casting from u32 to __u64. Fixed by explicitly casting each type which is not __u64, or by performing operation after assignment. The patch further adds missing debug information to track the current value of X_recv. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-11[DCCP] ccid3: Reorder packet history source fileGerrit Renker1-107/+112
No code change at all. This reorders the source file to follow the same order as the corresponding header file. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
2006-12-11[DCCP] ccid3: Reorder packet history header fileGerrit Renker1-60/+67
No code change at all. To make the header file easier to read, the following ordering is established among the declarations: * hist_new * hist_delete * hist_entry_new * hist_head * hist_find_entry * hist_add_entry * hist_entry_delete * hist_purge Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>