summaryrefslogtreecommitdiffstats
path: root/net/core
AgeCommit message (Collapse)AuthorFilesLines
2014-02-09net: fix 'ip rule' iif/oif device renameMaciej Żenczykowski1-0/+7
ip rules with iif/oif references do not update: (detach/attach) across interface renames. Signed-off-by: Maciej Żenczykowski <maze@google.com> CC: Willem de Bruijn <willemb@google.com> CC: Eric Dumazet <edumazet@google.com> CC: Chris Davis <chrismd@google.com> CC: Carlo Contavalli <ccontavalli@google.com> Google-Bug-Id: 12936021 Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09net: Mark functions as static in core/dev.cRashika Kheria1-3/+3
Mark functions as static in core/dev.c because they are not used outside this file. This eliminates the following warning in core/dev.c: net/core/dev.c:2806:5: warning: no previous prototype for ‘__dev_queue_xmit’ [-Wmissing-prototypes] net/core/dev.c:4640:5: warning: no previous prototype for ‘netdev_adjacent_sysfs_add’ [-Wmissing-prototypes] net/core/dev.c:4650:6: warning: no previous prototype for ‘netdev_adjacent_sysfs_del’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06net: use __GFP_NORETRY for high order allocationsEric Dumazet1-2/+4
sock_alloc_send_pskb() & sk_page_frag_refill() have a loop trying high order allocations to prepare skb with low number of fragments as this increases performance. Problem is that under memory pressure/fragmentation, this can trigger OOM while the intent was only to try the high order allocations, then fallback to order-0 allocations. We had various reports from unexpected regressions. According to David, setting __GFP_NORETRY should be fine, as the asynchronous compaction is still enabled, and this will prevent OOM from kicking as in : CFSClientEventm invoked oom-killer: gfp_mask=0x42d0, order=3, oom_adj=0, oom_score_adj=0, oom_score_badness=2 (enabled),memcg_scoring=disabled CFSClientEventm Call Trace: [<ffffffff8043766c>] dump_header+0xe1/0x23e [<ffffffff80437a02>] oom_kill_process+0x6a/0x323 [<ffffffff80438443>] out_of_memory+0x4b3/0x50d [<ffffffff8043a4a6>] __alloc_pages_may_oom+0xa2/0xc7 [<ffffffff80236f42>] __alloc_pages_nodemask+0x1002/0x17f0 [<ffffffff8024bd23>] alloc_pages_current+0x103/0x2b0 [<ffffffff8028567f>] sk_page_frag_refill+0x8f/0x160 [<ffffffff80295fa0>] tcp_sendmsg+0x560/0xee0 [<ffffffff802a5037>] inet_sendmsg+0x67/0x100 [<ffffffff80283c9c>] __sock_sendmsg_nosec+0x6c/0x90 [<ffffffff80283e85>] sock_sendmsg+0xc5/0xf0 [<ffffffff802847b6>] __sys_sendmsg+0x136/0x430 [<ffffffff80284ec8>] sys_sendmsg+0x88/0x110 [<ffffffff80711472>] system_call_fastpath+0x16/0x1b Out of Memory: Kill process 2856 (bash) score 9999 or sacrifice child Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-06netpoll: fix netconsole IPv6 setupSabrina Dubroca1-1/+3
Currently, to make netconsole start over IPv6, the source address needs to be specified. Without a source address, netpoll_parse_options assumes we're setting up over IPv4 and the destination IPv6 address is rejected. Check if the IP version has been forced by a source address before checking for a version mismatch when parsing the destination address. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04rtnetlink: fix oops in rtnl_link_get_slave_info_data_sizeFernando Luis Vazquez Cao1-1/+1
We should check whether rtnetlink link operations are defined before calling get_slave_size(). Without this, the following oops can occur when adding a tap device to OVS. [ 87.839553] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 87.839595] IP: [<ffffffff813d47c0>] if_nlmsg_size+0xf0/0x220 [...] [ 87.840651] Call Trace: [ 87.840664] [<ffffffff813d694b>] ? rtmsg_ifinfo+0x2b/0x100 [ 87.840688] [<ffffffff813c8340>] ? __netdev_adjacent_dev_insert+0x150/0x1a0 [ 87.840718] [<ffffffff813d6a50>] ? rtnetlink_event+0x30/0x40 [ 87.840742] [<ffffffff814b4144>] ? notifier_call_chain+0x44/0x70 [ 87.840768] [<ffffffff813c8946>] ? __netdev_upper_dev_link+0x3c6/0x3f0 [ 87.840798] [<ffffffffa0678d6c>] ? netdev_create+0xcc/0x160 [openvswitch] [ 87.840828] [<ffffffffa06781ea>] ? ovs_vport_add+0x4a/0xd0 [openvswitch] [ 87.840857] [<ffffffffa0670139>] ? new_vport+0x9/0x50 [openvswitch] [ 87.840884] [<ffffffffa067279e>] ? ovs_vport_cmd_new+0x11e/0x210 [openvswitch] [ 87.840915] [<ffffffff813f3efa>] ? genl_family_rcv_msg+0x19a/0x360 [ 87.840941] [<ffffffff813f40c0>] ? genl_family_rcv_msg+0x360/0x360 [ 87.840967] [<ffffffff813f4139>] ? genl_rcv_msg+0x79/0xc0 [ 87.840991] [<ffffffff813b6cf9>] ? __kmalloc_reserve.isra.25+0x29/0x80 [ 87.841018] [<ffffffff813f2389>] ? netlink_rcv_skb+0xa9/0xc0 [ 87.841042] [<ffffffff813f27cf>] ? genl_rcv+0x1f/0x30 [ 87.841064] [<ffffffff813f1988>] ? netlink_unicast+0xe8/0x1e0 [ 87.841088] [<ffffffff813f1d9a>] ? netlink_sendmsg+0x31a/0x750 [ 87.841113] [<ffffffff813aee96>] ? sock_sendmsg+0x86/0xc0 [ 87.841136] [<ffffffff813c960d>] ? __netdev_update_features+0x4d/0x200 [ 87.841163] [<ffffffff813ca94e>] ? ethtool_get_value+0x2e/0x50 [ 87.841188] [<ffffffff813af269>] ? ___sys_sendmsg+0x359/0x370 [ 87.841212] [<ffffffff813da686>] ? dev_ioctl+0x1a6/0x5c0 [ 87.841236] [<ffffffff8109c210>] ? autoremove_wake_function+0x30/0x30 [ 87.841264] [<ffffffff813ac59d>] ? sock_do_ioctl+0x3d/0x50 [ 87.841288] [<ffffffff813aca68>] ? sock_ioctl+0x1e8/0x2c0 [ 87.841312] [<ffffffff811934bf>] ? do_vfs_ioctl+0x2cf/0x4b0 [ 87.841335] [<ffffffff813afeb9>] ? __sys_sendmsg+0x39/0x70 [ 87.841362] [<ffffffff814b86f9>] ? system_call_fastpath+0x16/0x1b [ 87.841386] Code: c0 74 10 48 89 ef ff d0 83 c0 07 83 e0 fc 48 98 49 01 c7 48 89 ef e8 d0 d6 fe ff 48 85 c0 0f 84 df 00 00 00 48 8b 90 08 07 00 00 <48> 8b 8a a8 00 00 00 31 d2 48 85 c9 74 0c 48 89 ee 48 89 c7 ff [ 87.841529] RIP [<ffffffff813d47c0>] if_nlmsg_size+0xf0/0x220 [ 87.841555] RSP <ffff880221aa5950> [ 87.841569] CR2: 00000000000000a8 [ 87.851442] ---[ end trace e42ab217691b4fc2 ]--- Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-28net: Fix warning on make htmldocs caused by skbuff.cMasanari Iida1-1/+1
This patch fixed following Warning while executing "make htmldocs". Warning(/net/core/skbuff.c:2164): No description found for parameter 'from' Warning(/net/core/skbuff.c:2164): Excess function parameter 'source' description in 'skb_zerocopy' Replace "@source" with "@from" fixed the warning. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-26net: add and use skb_gso_transport_seglen()Florian Westphal1-0/+25
This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to skbuff core so it may be reused by upcoming ip forwarding path patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds17-685/+1368
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-23rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_infoJiri Pirko1-2/+1
This check is not needed because the same check is done before fill_slave_info is used in rtnl_link_slave_info_fill. Also, by removing this check, kernel will fillup IFLA_INFO_SLAVE_KIND even for slaves of masters which does not implement fill_slave_info. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23net: Correctly sync addresses from multiple sources to single deviceVlad Yasevich1-8/+10
When we have multiple devices attempting to sync the same address to a single destination, each device should be permitted to sync it once. To accomplish this, pass the 'sync_cnt' of the source address when adding the addresss to the lower device. 'sync_cnt' tracks how many time a given address has been succefully synced. This way, we know that if the 'sync_cnt' passed in is 0, we should sync this address. Also, turn 'synced' member back into the counter as was originally done in commit 4543fbefe6e06a9e40d9f2b28d688393a299f079. net: count hw_addr syncs so that unsync works properly. It tracks how many time a given address has been added via a 'sync' operation. For every successfull 'sync' the counter is incremented, and for ever 'unsync', the counter is decremented. This makes sure that the address will be properly removed from the the lower device when all the upper devices have removed it. Reported-by: Andrey Dmitrov <andrey.dmitrov@oktetlabs.ru> CC: Andrey Dmitrov <andrey.dmitrov@oktetlabs.ru> CC: Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> CC: Konstantin Ushakov <Konstantin.Ushakov@oktetlabs.ru> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23Merge branch 'for-linus' of ↵Linus Torvalds1-31/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse update from Miklos Szeredi: "This contains a fix for a potential use-after-module-unload bug noticed by Al and caching improvements for read-only fuse filesystems by Andrew Gallagher" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: support clients that don't implement 'open' fuse: don't invalidate attrs when not using atime fuse: fix SetPageUptodate() condition in STORE fuse: fix pipe_buf_operations
2014-01-22bonding: convert netlink to use slave data info apiJiri Pirko1-51/+0
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22rtnetlink: provide api for getting and setting slave infoJiri Pirko1-20/+138
Recent patch bonding: add netlink attributes to slave link dev (1d3ee88ae0d6) Introduced yet another device specific way to access slave information over rtnetlink. There is one already there for bridge. This patch introduces generic way to do this, for getting and setting info as well by extending link_ops. Later on, this new interface will be used for bridge ports as well. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22rtnetlink: put "BOND" into nl attribute names which are related to bondingJiri Pirko1-8/+8
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22net/neighbour: queue work on power efficient wqviresh kumar1-2/+3
Workqueue used in neighbour layer have no real dependency of scheduling these on the cpu which scheduled them. On a idle system, it is observed that an idle cpu wakes up many times just to service this work. It would be better if we can schedule it on a cpu which the scheduler believes to be the most appropriate one. This patch replaces normal workqueues with power efficient versions. This doesn't change existing behavior of code unless CONFIG_WQ_POWER_EFFICIENT is enabled. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22fuse: fix pipe_buf_operationsMiklos Szeredi1-31/+1
Having this struct in module memory could Oops when if the module is unloaded while the buffer still persists in a pipe. Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal merge them into nosteal_pipe_buf_ops (this is the same as default_pipe_buf_ops except stealing the page from the buffer is not allowed). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: stable@vger.kernel.org
2014-01-21pktgen: Use ether_addr_copyJoe Perches1-4/+4
Use ether_addr_copy instead of memcpy(a, b, ETH_ALEN) to save some cycles on arm and powerpc. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21netpoll: Use ether_addr_copyJoe Perches1-2/+2
Use ether_addr_copy instead of memcpy(a, b, ETH_ALEN) to save some cycles on arm and powerpc. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21net: Export gro_find_by_type helpersOr Gerlitz1-0/+2
Export the gro_find_receive/complete_by_type helpers to they can be invoked by the gro callbacks of encapsulation protocols such as vxlan. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21net: Add GRO support for UDP encapsulating protocolsOr Gerlitz1-0/+1
Add GRO handlers for protocols that do UDP encapsulation, with the intent of being able to coalesce packets which encapsulate packets belonging to the same TCP session. For GRO purposes, the destination UDP port takes the role of the ether type field in the ethernet header or the next protocol in the IP header. The UDP GRO handler will only attempt to coalesce packets whose destination port is registered to have gro handler. Use a mark on the skb GRO CB data to disallow (flush) running the udp gro receive code twice on a packet. This solves the problem of udp encapsulated packets whose inner VM packet is udp and happen to carry a port which has registered offloads. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21Merge branch 'for-3.14' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "The bulk of changes are cleanups and preparations for the upcoming kernfs conversion. - cgroup_event mechanism which is and will be used only by memcg is moved to memcg. - pidlist handling is updated so that it can be served by seq_file. Also, the list is not sorted if sane_behavior. cgroup documentation explicitly states that the file is not sorted but it has been for quite some time. - All cgroup file handling now happens on top of seq_file. This is to prepare for kernfs conversion. In addition, all operations are restructured so that they map 1-1 to kernfs operations. - Other cleanups and low-pri fixes" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits) cgroup: trivial style updates cgroup: remove stray references to css_id doc: cgroups: Fix typo in doc/cgroups cgroup: fix fail path in cgroup_load_subsys() cgroup: fix missing unlock on error in cgroup_load_subsys() cgroup: remove for_each_root_subsys() cgroup: implement for_each_css() cgroup: factor out cgroup_subsys_state creation into create_css() cgroup: combine css handling loops in cgroup_create() cgroup: reorder operations in cgroup_create() cgroup: make for_each_subsys() useable under cgroup_root_mutex cgroup: css iterations and css_from_dir() are safe under cgroup_mutex cgroup: unify pidlist and other file handling cgroup: replace cftype->read_seq_string() with cftype->seq_show() cgroup: attach cgroup_open_file to all cgroup files cgroup: generalize cgroup_pidlist_open_file cgroup: unify read path so that seq_file is always used cgroup: unify cgroup_write_X64() and cgroup_write_string() cgroup: remove cftype->read(), ->read_map() and ->write() hugetlb_cgroup: convert away from cftype->read() ...
2014-01-21net: remove unnecessary initializations in net_dev_initSabrina Dubroca1-10/+0
softnet_data is already set to 0, no need to use memset or initialize specific fields to 0 or NULL afterwards. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19net: fix "queues" uevent between network namespacesWeilong Chen1-0/+26
When I create a new namespace with 'ip netns add net0', or add/remove new links in a namespace with 'ip link add/delete type veth', rx/tx queues events can be got in all namespaces. That is because rx/tx queue ktypes do not have namespace support, and their kobj parents are setted to NULL. This patch is to fix it. Reported-by: Libo Chen <chenlibo@huawei.com> Signed-off-by: Libo Chen <chenlibo@huawei.com> Signed-off-by: Weilong Chen <chenweilong@huawei.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19net: document accel_priv parameter for __dev_queue_xmit()Jason Wang1-1/+2
To silent "make htmldocs" warning. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18net: introduce SO_BPF_EXTENSIONSMichal Sekletar1-0/+4
For user space packet capturing libraries such as libpcap, there's currently only one way to check which BPF extensions are supported by the kernel, that is, commit aa1113d9f85d ("net: filter: return -EINVAL if BPF_S_ANC* operation is not supported"). For querying all extensions at once this might be rather inconvenient. Therefore, this patch introduces a new option which can be used as an argument for getsockopt(), and allows one to obtain information about which BPF extensions are supported by the current kernel. As David Miller suggests, we do not need to define any bits right now and status quo can just return 0 in order to state that this versions supports SKF_AD_PROTOCOL up to SKF_AD_PAY_OFFSET. Later additions to BPF extensions need to add their bits to the bpf_tell_extensions() function, as documented in the comment. Signed-off-by: Michal Sekletar <msekleta@redhat.com> Cc: David Miller <davem@davemloft.net> Reviewed-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-28/+2
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17bonding: add netlink attributes to slave link devsfeldma@cumulusnetworks.com1-0/+54
If link is IFF_SLAVE, extend link dev netlink attributes to include slave attributes with new IFLA_SLAVE nest. Add netlink notification (RTM_NEWLINK) when slave status changes from backup to active, or visa-versa. Adds new ndo_get_slave op to net_device_ops to fill skb with IFLA_SLAVE attributes. Currently only used by bonding driver, but could be used by other aggregating devices with slaves. Signed-off-by: Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16net-sysfs: add support for device-specific rx queue sysfs attributesMichael Dalton2-27/+35
Extend existing support for netdevice receive queue sysfs attributes to permit a device-specific attribute group. Initial use case for this support will be to allow the virtio-net device to export per-receive queue mergeable receive buffer size. Signed-off-by: Michael Dalton <mwdalton@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16net: allow > 0 order atomic page alloc in skb_page_frag_refillMichael Dalton1-3/+1
skb_page_frag_refill currently permits only order-0 page allocs unless GFP_WAIT is used. Change skb_page_frag_refill to attempt higher-order page allocations whether or not GFP_WAIT is used. If memory cannot be allocated, the allocator will fall back to successively smaller page allocs (down to order-0 page allocs). This change brings skb_page_frag_refill in line with the existing page allocation strategy employed by netdev_alloc_frag, which attempts higher-order page allocations whether or not GFP_WAIT is set, falling back to successively lower-order page allocations on failure. Part of migration of virtio-net to per-receive queue page frag allocators. Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Michael Dalton <mwdalton@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16net: add NETDEV_PRECHANGEMTU to notify before mtu change happensVeaceslav Falico1-0/+5
Currently, if a device changes its mtu, first the change happens (invloving all the side effects), and after that the NETDEV_CHANGEMTU is sent so that other devices can catch up with the new mtu. However, if they return NOTIFY_BAD, then the change is reverted and error returned. This is a really long and costy operation (sometimes). To fix this, add NETDEV_PRECHANGEMTU notification which is called prior to any change actually happening, and if any callee returns NOTIFY_BAD - the change is aborted. This way we're skipping all the playing with apply/revert the mtu. CC: "David S. Miller" <davem@davemloft.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16net: Check skb->rxhash in gro_receiveTom Herbert1-1/+8
When initializing a gro_list for a packet, first check the rxhash of the incoming skb against that of the skb's in the list. This should be a very strong inidicator of whether the flow is going to be matched, and potentially allows a lot of other checks to be short circuited. Use skb_hash_raw so that we don't force the hash to be calculated. Tested by running netperf 200 TCP_STREAMs between two machines with GRO, HW rxhash, and 1G. Saw no performance degration, slight reduction of time in dev_gro_receive. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15bpf: do not use reciprocal divideEric Dumazet1-28/+2
At first Jakub Zawadzki noticed that some divisions by reciprocal_divide were not correct. (off by one in some cases) http://www.wireshark.org/~darkjames/reciprocal-buggy.c He could also show this with BPF: http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c The reciprocal divide in linux kernel is not generic enough, lets remove its use in BPF, as it is not worth the pain with current cpus. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl> Cc: Mircea Gherzan <mgherzan@gmail.com> Cc: Daniel Borkmann <dxchgb@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Matt Evans <matt@ozlabs.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15net: rename sysfs symlinks on device name changeVeaceslav Falico1-0/+22
Currently, we don't rename the upper/lower_ifc symlinks in /sys/class/net/*/ , which might result stale/duplicate links/names. Fix this by adding netdev_adjacent_rename_links(dev, oldname) which renames all the upper/lower interface's links to dev from the upper/lower_oldname to the new name. We don't need a rollback because only we control these symlinks and if we fail to rename them - sysfs will anyway complain. Reported-by: Ding Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15net: add sysfs helpers for netdev_adjacent logicVeaceslav Falico1-27/+30
They clean up the code a bit and can be used further. CC: Ding Tianhong <dingtianhong@huawei.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15neigh: split lines for NEIGH_VAR_SET so they are not too longJiri Pirko1-3/+6
introduced by: commit 1f9248e5606afc6485255e38ad57bdac08fa7711 "neigh: convert parms to an array" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: replace macros net_random and net_srandom with direct calls to prandomAruna-Hewapathirane2-3/+4
This patch removes the net_random and net_srandom macros and replaces them with direct calls to the prandom ones. As new commits only seem to use prandom_u32 there is no use to keep them around. This change makes it easier to grep for users of prandom_u32. Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Add trace events for all receive entry points, exposing more skb fieldsBen Hutchings1-39/+61
The existing net/netif_rx and net/netif_receive_skb trace events provide little information about the skb, nor do they indicate how it entered the stack. Add trace events at entry of each of the exported functions, including most fields that are likely to be interesting for debugging driver datapath behaviour. Split netif_rx() and netif_receive_skb() so that internal calls are not traced. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Add net_dev_start_xmit trace event, exposing more skb fieldsBen Hutchings1-0/+2
The existing net/net_dev_xmit trace event provides little information about the skb that has been passed to the driver, and it is not simple to add more since the skb may already have been freed at the point the event is emitted. Add a separate trace event before the skb is passed to the driver, including most fields that are likely to be interesting for debugging driver datapath behaviour. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14net: Fix indentation in dev_hard_start_xmit()Ben Hutchings1-2/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-16/+25
2014-01-14net: add skb_checksum_setupPaul Durrant1-0/+273
This patch adds a function to set up the partial checksum offset for IP packets (and optionally re-calculate the pseudo-header checksum) into the core network code. The implementation was previously private and duplicated between xen-netback and xen-netfront, however it is not xen-specific and is potentially useful to any network driver. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13Merge branch 'master' of ↵David S. Miller1-14/+66
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Conflicts: net/xfrm/xfrm_policy.c Steffen Klassert says: ==================== This pull request has a merge conflict between commits be7928d20bab ("net: xfrm: xfrm_policy: fix inline not at beginning of declaration") and da7c224b1baa ("net: xfrm: xfrm_policy: silence compiler warning") from the net-next tree and commit 2f3ea9a95c58 ("xfrm: checkpatch erros with inline keyword position") from the ipsec-next tree. The version from net-next can be used, like it is done in linux-next. 1) Checkpatch cleanups, from Weilong Chen. 2) Fix lockdep complaints when pktgen is used with IPsec, from Fan Du. 3) Update pktgen to allow any combination of IPsec transport/tunnel mode and AH/ESP/IPcomp type, from Fan Du. 4) Make pktgen_dst_metrics static, Fengguang Wu. 5) Compile fix for pktgen when CONFIG_XFRM is not set, from Fan Du. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: make dev_set_mtu() honor notification return codeVeaceslav Falico1-9/+25
Currently, after changing the MTU for a device, dev_set_mtu() calls NETDEV_CHANGEMTU notification, however doesn't verify it's return code - which can be NOTIFY_BAD - i.e. some of the net notifier blocks refused this change, and continues nevertheless. To fix this, verify the return code, and if it's an error - then revert the MTU to the original one, notify again and pass the error code. CC: Jiri Pirko <jiri@resnulli.us> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13net: gro: change GRO overflow strategyEric Dumazet1-2/+15
GRO layer has a limit of 8 flows being held in GRO list, for performance reason. When a packet comes for a flow not yet in the list, and list is full, we immediately give it to upper stacks, lowering aggregation performance. With TSO auto sizing and FQ packet scheduler, this situation happens more often. This patch changes strategy to simply evict the oldest flow of the list. This works better because of the nature of packet trains for which GRO is efficient. This also has the effect of lowering the GRO latency if many flows are competing. Tested : Used a 40Gbps NIC, with 4 RX queues, and 200 concurrent TCP_STREAM netperf. Before patch, aggregate rate is 11Gbps (while a single flow can reach 30Gbps) After patch, line rate is reached. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jerry Chu <hkchu@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10net: core: explicitly select a txq before doing l2 forwardingJason Wang3-16/+25
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10{xfrm,pktgen} Fix compiling error when CONFIG_XFRM is not setFan Du1-2/+2
0-DAY kernel build testing backend reported below error: All error/warnings: net/core/pktgen.c: In function 'pktgen_if_write': >> >> net/core/pktgen.c:1487:10: error: 'struct pktgen_dev' has no member named 'spi' >> >> net/core/pktgen.c:1488:43: error: 'struct pktgen_dev' has no member named 'spi' Fix this by encapuslating the code with CONFIG_XFRM. Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-01-07net-gre-gro: Add GRE support to the GRO stackJerry Chu1-0/+26
This patch built on top of Commit 299603e8370a93dd5d8e8d800f0dff1ce2c53d36 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5dcd8755715c7143b4571d5c44f01796f1 "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-07net: Do not enable tx-nocache-copy by defaultBenjamin Poirier1-5/+0
There are many cases where this feature does not improve performance or even reduces it. For example, here are the results from tests that I've run using 3.12.6 on one Intel Xeon W3565 and one i7 920 connected by ixgbe adapters. The results are from the Xeon, but they're similar on the i7. All numbers report the mean±stddev over 10 runs of 10s. 1) latency tests similar to what is described in "c6e1a0d net: Allow no-cache copy from user on transmit" There is no statistically significant difference between tx-nocache-copy on/off. nic irqs spread out (one queue per cpu) 200x netperf -r 1400,1 tx-nocache-copy off 692000±1000 tps 50/90/95/99% latency (us): 275±2/643.8±0.4/799±1/2474.4±0.3 tx-nocache-copy on 693000±1000 tps 50/90/95/99% latency (us): 274±1/644.1±0.7/800±2/2474.5±0.7 200x netperf -r 14000,14000 tx-nocache-copy off 86450±80 tps 50/90/95/99% latency (us): 334.37±0.02/838±1/2100±20/3990±40 tx-nocache-copy on 86110±60 tps 50/90/95/99% latency (us): 334.28±0.01/837±2/2110±20/3990±20 2) single stream throughput tests tx-nocache-copy leads to higher service demand throughput cpu0 cpu1 demand (Gb/s) (Gcycle) (Gcycle) (cycle/B) nic irqs and netperf on cpu0 (1x netperf -T0,0 -t omni -- -d send) tx-nocache-copy off 9402±5 9.4±0.2 0.80±0.01 tx-nocache-copy on 9403±3 9.85±0.04 0.838±0.004 nic irqs on cpu0, netperf on cpu1 (1x netperf -T1,1 -t omni -- -d send) tx-nocache-copy off 9401±5 5.83±0.03 5.0±0.1 0.923±0.007 tx-nocache-copy on 9404±2 5.74±0.03 5.523±0.009 0.958±0.002 As a second example, here are some results from Eric Dumazet with latest net-next. tx-nocache-copy also leads to higher service demand (cpu is Intel(R) Xeon(R) CPU X5660 @ 2.80GHz) lpq83:~# ./ethtool -K eth0 tx-nocache-copy on lpq83:~# perf stat ./netperf -H lpq84 -c MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB 87380 16384 16384 10.00 9407.44 2.50 -1.00 0.522 -1.000 Performance counter stats for './netperf -H lpq84 -c': 4282.648396 task-clock # 0.423 CPUs utilized 9,348 context-switches # 0.002 M/sec 88 CPU-migrations # 0.021 K/sec 355 page-faults # 0.083 K/sec 11,812,797,651 cycles # 2.758 GHz [82.79%] 9,020,522,817 stalled-cycles-frontend # 76.36% frontend cycles idle [82.54%] 4,579,889,681 stalled-cycles-backend # 38.77% backend cycles idle [67.33%] 6,053,172,792 instructions # 0.51 insns per cycle # 1.49 stalled cycles per insn [83.64%] 597,275,583 branches # 139.464 M/sec [83.70%] 8,960,541 branch-misses # 1.50% of all branches [83.65%] 10.128990264 seconds time elapsed lpq83:~# ./ethtool -K eth0 tx-nocache-copy off lpq83:~# perf stat ./netperf -H lpq84 -c MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to lpq84.prod.google.com () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % U us/KB us/KB 87380 16384 16384 10.00 9412.45 2.15 -1.00 0.449 -1.000 Performance counter stats for './netperf -H lpq84 -c': 2847.375441 task-clock # 0.281 CPUs utilized 11,632 context-switches # 0.004 M/sec 49 CPU-migrations # 0.017 K/sec 354 page-faults # 0.124 K/sec 7,646,889,749 cycles # 2.686 GHz [83.34%] 6,115,050,032 stalled-cycles-frontend # 79.97% frontend cycles idle [83.31%] 1,726,460,071 stalled-cycles-backend # 22.58% backend cycles idle [66.55%] 2,079,702,453 instructions # 0.27 insns per cycle # 2.94 stalled cycles per insn [83.22%] 363,773,213 branches # 127.757 M/sec [83.29%] 4,242,732 branch-misses # 1.17% of all branches [83.51%] 10.128449949 seconds time elapsed CC: Tom Herbert <therbert@google.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'master' of ↵David S. Miller1-0/+85
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== [GIT net-next] Open vSwitch Open vSwitch changes for net-next/3.14. Highlights are: * Performance improvements in the mechanism to get packets to userspace using memory mapped netlink and skb zero copy where appropriate. * Per-cpu flow stats in situations where flows are likely to be shared across CPUs. Standard flow stats are used in other situations to save memory and allocation time. * A handful of code cleanups and rationalization. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 12:03:42 +0000