summaryrefslogtreecommitdiffstats
path: root/net/core
AgeCommit message (Collapse)AuthorFilesLines
2010-03-08ethtool: Use noinline_for_stackEric Dumazet1-32/+8
Use self documenting noinline_for_stack instead of duplicated comments. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07sock.c: potential null dereferenceDan Carpenter1-1/+2
We test that "prot->rsk_prot" is non-null right before we dereference it on this line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05ethtool: Add direct access to ops->get_sset_countJeff Garzik1-4/+3
On 03/04/2010 09:26 AM, Ben Hutchings wrote: > On Thu, 2010-03-04 at 00:51 -0800, Jeff Kirsher wrote: >> From: Jeff Garzik<jgarzik@redhat.com> >> >> This patch is an alternative approach for accessing string >> counts, vs. the drvinfo indirect approach. This way the drvinfo >> space doesn't run out, and we don't break ABI later. > [...] >> --- a/net/core/ethtool.c >> +++ b/net/core/ethtool.c >> @@ -214,6 +214,10 @@ static noinline int ethtool_get_drvinfo(struct net_device *dev, void __user *use >> info.cmd = ETHTOOL_GDRVINFO; >> ops->get_drvinfo(dev,&info); >> >> + /* >> + * this method of obtaining string set info is deprecated; >> + * consider using ETHTOOL_GSSET_INFO instead >> + */ > > This comment belongs on the interface (ethtool.h) not the > implementation. Debatable -- the current comment is located at the callsite of ops->get_sset_count(), which is where an implementor might think to add a new call. Not all the numeric fields in ethtool_drvinfo are obtained from ->get_sset_count(). Hence the "some" in the attached patch to include/linux/ethtool.h, addressing your comment. > [...] >> +static noinline int ethtool_get_sset_info(struct net_device *dev, >> + void __user *useraddr) >> +{ > [...] >> + /* calculate size of return buffer */ >> + for (i = 0; i< 64; i++) >> + if (sset_mask& (1ULL<< i)) >> + n_bits++; > [...] > > We have a function for this: > > n_bits = hweight64(sset_mask); Agreed. I've attached a follow-up patch, which should enable my/Jeff's kernel patch to be applied, followed by this one. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05ethtool: Add direct access to ops->get_sset_countJeff Garzik1-0/+72
This patch is an alternative approach for accessing string counts, vs. the drvinfo indirect approach. This way the drvinfo space doesn't run out, and we don't break ABI later. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05net: backlog functions renameZhu Yi1-1/+1
sk_add_backlog -> __sk_add_backlog sk_add_backlog_limited -> sk_add_backlog Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-05net: add limit for socket backlogZhu Yi1-2/+14
We got system OOM while running some UDP netperf testing on the loopback device. The case is multiple senders sent stream UDP packets to a single receiver via loopback on local host. Of course, the receiver is not able to handle all the packets in time. But we surprisingly found that these packets were not discarded due to the receiver's sk->sk_rcvbuf limit. Instead, they are kept queuing to sk->sk_backlog and finally ate up all the memory. We believe this is a secure hole that a none privileged user can crash the system. The root cause for this problem is, when the receiver is doing __release_sock() (i.e. after userspace recv, kernel udp_recvmsg -> skb_free_datagram_locked -> release_sock), it moves skbs from backlog to sk_receive_queue with the softirq enabled. In the above case, multiple busy senders will almost make it an endless loop. The skbs in the backlog end up eat all the system memory. The issue is not only for UDP. Any protocols using socket backlog is potentially affected. The patch adds limit for socket backlog so that the backlog size cannot be expanded endlessly. Reported-by: Alex Shi <alex.shi@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: Patrick McHardy <kaber@trash.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller4-5/+14
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-28scm: Only support SCM_RIGHTS on unix domain sockets.Eric W. Biederman1-0/+2
We use scm_send and scm_recv on both unix domain and netlink sockets, but only unix domain sockets support everything required for file descriptor passing, so error if someone attempts to pass file descriptors over netlink sockets. Cc: stable@kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28ethtool: do not set some flags, if others failedJeff Garzik1-4/+6
NETIF_F_NTUPLE flag setting introduced a bug: non-ntuple flags like LRO may be successfully set, before ioctl(2) returns failure to userspace. The set-flags operation should be all-or-none, rather than leaving things in an inconsistent state prior to reporting failure to userspace. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: support specifying device flags on device creationPatrick McHardy1-9/+43
commit e8469ed959c373c2ff9e6f488aa5a14971aebe1f Author: Patrick McHardy <kaber@trash.net> Date: Tue Feb 23 20:41:30 2010 +0100 Support specifying the initial device flags when creating a device though rtnl_link. Devices allocated by rtnl_create_link() are marked as INITIALIZING in order to surpress netlink registration notifications. To complete setup, rtnl_configure_link() must be called, which performs the device flag changes and invokes the deferred notifiers if everything went well. Two examples: # add macvlan to eth0 # $ ip link add link eth0 up allmulticast on type macvlan [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 26:f8:84:02:f9:2a brd ff:ff:ff:ff:ff:ff [ROUTE]ff00::/8 dev macvlan0 table local metric 256 mtu 1500 advmss 1440 hoplimit 0 [ROUTE]fe80::/64 dev macvlan0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 [LINK]11: macvlan0@eth0: <BROADCAST,MULTICAST,ALLMULTI,UP,LOWER_UP> mtu 1500 link/ether 26:f8:84:02:f9:2a [ADDR]11: macvlan0 inet6 fe80::24f8:84ff:fe02:f92a/64 scope link valid_lft forever preferred_lft forever [ROUTE]local fe80::24f8:84ff:fe02:f92a via :: dev lo table local proto none metric 0 mtu 16436 advmss 16376 hoplimit 0 [ROUTE]default via fe80::215:e9ff:fef0:10f8 dev macvlan0 proto kernel metric 1024 mtu 1500 advmss 1440 hoplimit 0 [NEIGH]fe80::215:e9ff:fef0:10f8 dev macvlan0 lladdr 00:15:e9:f0:10:f8 router STALE [ROUTE]2001:6f8:974::/64 dev macvlan0 proto kernel metric 256 expires 0sec mtu 1500 advmss 1440 hoplimit 0 [PREFIX]prefix 2001:6f8:974::/64 dev macvlan0 onlink autoconf valid 14400 preferred 131084 [ADDR]11: macvlan0 inet6 2001:6f8:974:0:24f8:84ff:fe02:f92a/64 scope global dynamic valid_lft 86399sec preferred_lft 14399sec # add VLAN to eth1, eth1 is down # $ ip link add link eth1 up type vlan id 1000 RTNETLINK answers: Network is down <no events> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27dev: support deferring device flag change notificationsPatrick McHardy2-61/+104
Split dev_change_flags() into two functions: __dev_change_flags() to perform the actual changes and __dev_notify_flags() to invoke netdevice notifiers. This will be used by rtnl_link to defer netlink notifications until the device has been fully configured. This changes ordering of some operations, in particular: - netlink notifications are sent after all changes have been performed. As a side effect this surpresses one unnecessary netlink message when the IFF_UP and other flags are changed simultaneously. - The NETDEV_UP/NETDEV_DOWN and NETDEV_CHANGE notifiers are invoked after all changes have been performed. Their relative is unchanged. - net_dmaengine_put() is invoked before the NETDEV_DOWN notifier instead of afterwards. This should not make any difference since both RX and TX are already shut down at this point. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: handle rtnl_link netlink notifications manuallyPatrick McHardy2-4/+8
In order to support specifying device flags during device creation, we must be able to roll back device registration in case setting the flags fails without sending any notifications related to the device to userspace. This patch changes rollback_registered_many() and register_netdevice() to manually send netlink notifications for devices not handled by rtnl_link and allows to defer notifications for devices handled by rtnl_link until setup is complete. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-27rtnetlink: ignore NETDEV_PRE_UP notifier in rtnetlink_event()Patrick McHardy1-0/+1
Commit 3b8bcfd (net: introduce pre-up netdev notifier) added a new notifier which is run before a device is set UP for use by cfg80211. The patch missed to add the new notifier to the ignore list in rtnetlink_event(), so we currently get an unnecessary netlink notification before a device is set UP. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26Revert "ethtool: Add n-tuple string length to drvinfo and return it"David S. Miller1-3/+0
This reverts commit c79c5ffdce14abb4de3878c5aa8c3c6e5093c69b. As Jeff points out we can't break the user visible interface like this, we need to add this into the reserved[] thing. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26net: add addr len check to dev_mc_addJiri Pirko1-0/+2
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26ethtool: Add n-tuple string length to drvinfo and return itPeter Waskiewicz1-0/+3
The drvinfo struct should include the number of strings that get_rx_ntuple will return. It will be variable if an underlying driver implements its own get_rx_ntuple routine, so userspace needs to know how much data is coming. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26netdev: use list_first_entry macrostephen hemminger1-3/+3
Use list_first_entry macro; no longer any need to use 'next' directly in list to find first entry. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-26rtnetlink: clean up SR-IOV config interfaceWilliams, Mitch A1-8/+5
This patch consists of a few minor cleanups to the SR-IOV configurion code in rtnetlink. - Remove unneccesary lock - Remove unneccesary casts - Return correct error code for no driver support These changes are based on comments from Patrick McHardy Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-25Merge branch 'master' of ↵David S. Miller1-1/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-25net: Add checking to rcu_dereference() primitivesPaul E. McKenney4-5/+14
Update rcu_dereference() primitives to use new lockdep-based checking. The rcu_dereference() in __in6_dev_get() may be protected either by rcu_read_lock() or RTNL, per Eric Dumazet. The rcu_dereference() in __sk_free() is protected by the fact that it is never reached if an update could change it. Check for this by using rcu_dereference_check() to verify that the struct sock's ->sk_wmem_alloc counter is zero. Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-5-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-23net: bug fix for vlan + gro issueAjit Khaparde1-1/+1
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22xfrm: SA lookups signature with markJamal Hadi Salim1-1/+2
pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19net-sysfs: Use rtnl_trylock in wireless sysfs methods.Eric W. Biederman1-1/+2
The wireless sysfs methods like the rest of the networking sysfs methods are removed with the rtnl_lock held and block until the existing methods stop executing. So use rtnl_trylock and restart_syscall so that the code continues to work. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17net: export attach/detach filter routinesMichael S. Tsirkin1-0/+2
Export sk_attach_filter/sk_detach_filter routines, so that tun module can use them. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17net: bug fix for vlan + gro issueAjit Khaparde1-1/+1
Traffic (tcp) doesnot start on a vlan interface when gro is enabled. Even the tcp handshake was not taking place. This is because, the eth_type_trans call before the netif_receive_skb in napi_gro_finish() resets the skb->dev to napi->dev from the previously set vlan netdev interface. This causes the ip_route_input to drop the incoming packet considering it as a packet coming from a martian source. I could repro this on 2.6.32.7 (stable) and 2.6.33-rc7. With this fix, the traffic starts and the test runs fine on both vlan and non-vlan interfaces. CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17ethtool: Don't flush n-tuple list from ethtool_reset()Ben Hutchings1-3/+0
The n-tuple list should be flushed if and only if the ETH_RESET_FILTER flag is set and the driver is able to reset filtering/flow direction hardware without also resetting a component whose flag is not set. This test is best left to the driver. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17net: use kasprintf() for socket cache namesAlexey Dobriyan1-8/+2
kasprintf() makes code smaller. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17net: remove INIT_RCU_HEAD() usageAlexey Dobriyan1-1/+0
call_rcu() will unconditionally reinitialize RCU head anyway. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-16net neigh: Decouple per interface neighbour table controls from binary sysctlsEric W. Biederman1-3/+4
Stop computing the number of neighbour table settings we have by counting the number of binary sysctls. This behaviour was silly and meant that we could not add another neighbour table setting without also adding another binary sysctl. Don't pass the binary sysctl path for neighour table entries into neigh_sysctl_register. These parameters are no longer used and so are just dead code. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16ethtool: allow non-admin user to read GRO settings.stephen hemminger1-0/+1
Looks like an oversight in GRO design. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ethtool: reduce stack usageEric Dumazet1-7/+28
dev_ethtool() is currently using 604 bytes of stack, even with gcc-4.4.2 objdump -d vmlinux | scripts/checkstack.pl ... 0xc04bbc33 dev_ethtool [vmlinux]: 604 ... Adding noinline attributes to selected functions can reduce stack usage. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ethtool: Move n-tuple capability check into set_flagsPeter Waskiewicz1-5/+8
set_flags should check if the underlying device supports n-tuple filter programming before setting the device flags on the netdevice. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ethtool: Fix filter addition when caching n-tuple filtersPeter Waskiewicz1-16/+24
We can allow a filter to be added successfully to the underlying hardware, but still return an error if the cached list memory allocation fails. This patch fixes that condition. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12rtnetlink: Add VF config code to rtnetlinkWilliams, Mitch A1-0/+67
Add code to allow rtnetlink clients to query and set VF information through the PF driver. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko1-1/+1
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-11ethtool: Use explicit designated initializers for .cmdRoland Dreier1-5/+5
Initialize the .cmd member of various ethtool using a designated struct initializer rather. This makes things a teeny bit more robust, although the chance of a struct layout changing is extremely remote, and also makes the code a little easier to read. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10ethtool: Introduce n-tuple filter programming supportPeter P Waskiewicz Jr2-1/+333
This patchset enables the ethtool layer to program n-tuple filters to an underlying device. The idea is to allow capable hardware to have static rules applied that can assist steering flows into appropriate queues. Hardware that is known to support these types of filters today are ixgbe and niu. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-09Merge branch 'master' of ↵David S. Miller2-0/+3
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-02-08dst: call cond_resched() in dst_gc_task()Eric Dumazet1-0/+2
Kernel bugzilla #15239 On some workloads, it is quite possible to get a huge dst list to process in dst_gc_task(), and trigger soft lockup detection. Fix is to call cond_resched(), as we run in process context. Reported-by: Pawel Staszewski <pstaszewski@itcare.pl> Tested-by: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-04pktgen: Fix freezing problemRafael J. Wysocki1-0/+1
Add missing try_to_freeze() to one of the pktgen_thread_worker() code paths so that it doesn't block suspend/hibernation. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=15006 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-and-tested-by: Ciprian Dorin Craciun <ciprian.craciun@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03net: maintain namespace isolation between vlan and real deviceArnd Bergmann1-4/+31
In the vlan and macvlan drivers, the start_xmit function forwards data to the dev_queue_xmit function for another device, which may potentially belong to a different namespace. To make sure that classification stays within a single namespace, this resets the potentially critical fields. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25net: use helpers to access uc list V2Jiri Pirko1-2/+2
This patch introduces three macros to work with uc list from net drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-23neigh: simplify seq_file codeAlexey Dobriyan1-7/+4
Simpily pass 'struct neigh_table' with seq_file private pointer, and save one dereference. Proc entry itself isn't interesting. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-21net: Optimize non-gso test checksKrishna Kumar1-12/+17
Avoid checking twice whether skb needs to be linearized, if one skb_linearize was already done. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-19net: Unexport napi_gro_flush().David S. Miller1-2/+1
Nothing outside of net/core/dev.c uses it. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17net: spread __net_init, __net_exitAlexey Dobriyan3-5/+5
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15net/core/sock.c: quiet sparse noiseH Hartley Sweeten1-1/+1
In sock_getsockopt the symbol 'lv' is declared as an unsigned int type, probably due to sizeof returning a size_t which is really an unsigned int. This produces a sparse warning for SO_PEERNAME due to the sock->ops->getname() call: warning: incorrect type in argument 3 (different signedness) expected int *sockaddr_len got unsigned int *<noident> Quiet the warning by changing the type of 'lv' to an int. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-13netpoll: allow execution of multiple rx_hooks per interfaceDaniel Borkmann1-63/+106
Signed-off-by: Daniel Borkmann <danborkmann@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-0/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits) sky2: Fix oops in sky2_xmit_frame() after TX timeout Documentation/3c509: document ethtool support af_packet: Don't use skb after dev_queue_xmit() vxge: use pci_dma_mapping_error to test return value netfilter: ebtables: enforce CAP_NET_ADMIN e1000e: fix and commonize code for setting the receive address registers e1000e: e1000e_enable_tx_pkt_filtering() returns wrong value e1000e: perform 10/100 adaptive IFS only on parts that support it e1000e: don't accumulate PHY statistics on PHY read failure e1000e: call pci_save_state() after pci_restore_state() netxen: update version to 4.0.72 netxen: fix set mac addr netxen: fix smatch warning netxen: fix tx ring memory leak tcp: update the netstamp_needed counter when cloning sockets TI DaVinci EMAC: Handle emac module clock correctly. dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips ixgbe: Fix compiler warning about variable being used uninitialized netfilter: nf_ct_ftp: fix out of bounds read in update_nl_seq() mv643xx_eth: don't include cache padding in rx desc buffer size ... Fix trivial conflict in drivers/scsi/cxgb3i/cxgb3i_offload.c
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 09:28:51 +0000