summaryrefslogtreecommitdiffstats
path: root/net/core/devlink.c
AgeCommit message (Collapse)AuthorFilesLines
2020-11-25devlink: Make sure devlink instance and port are in same net namespaceParav Pandit1-1/+2
When devlink reload operation is not used, netdev of an Ethernet port may be present in different net namespace than the net namespace of the devlink instance. Ensure that both the devlink instance and devlink port netdev are located in same net namespace. Fixes: 070c63f20f6c ("net: devlink: allow to change namespaces during reload") Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25devlink: Hold rtnl lock while reading netdev attributesParav Pandit1-0/+4
A netdevice of a devlink port can be moved to different net namespace than its parent devlink instance. This scenario occurs when devlink reload is not used. When netdevice is undergoing migration to net namespace, its ifindex and name may change. In such use case, devlink port query may read stale netdev attributes. Fix it by reading them under rtnl lock. Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24devlink: Fix reload stats structureMoshe Shemesh1-16/+33
Fix reload stats structure exposed to the user. Change stats structure hierarchy to have the reload action as a parent of the stat entry and then stat entry includes value per limit. This will also help to avoid string concatenation on iproute2 output. Reload stats structure before this fix: "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } After this fix: "stats": { "reload": { "driver_reinit": { "unspecified": 2 }, "fw_activate": { "unspecified": 1, "no_reset": 0 } } Fixes: a254c264267e ("devlink: Add reload stats") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14devlink: Add missing genlmsg_cancel() in devlink_nl_sb_port_pool_fill()Wang Hai1-2/+4
If sb_occ_port_pool_get() failed in devlink_nl_sb_port_pool_fill(), msg should be canceled by genlmsg_cancel(). Fixes: df38dafd2559 ("devlink: implement shared buffer occupancy monitoring interface") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201113111622.11040-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12devlink: Avoid overwriting port attributes of registered portParav Pandit1-2/+6
Cited commit in fixes tag overwrites the port attributes for the registered port. Avoid such error by checking registered flag before setting attributes. Fixes: 71ad8d55f8e5 ("devlink: Replace devlink_port_attrs_set parameters with a struct") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27devlink: Unlock on error in dumpit()Dan Carpenter1-2/+4
This needs to unlock before returning. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27devlink: Fix some error codesDan Carpenter1-9/+15
These paths don't set the error codes. It's especially important in devlink_nl_region_notify_build() where it leads to a NULL dereference in the caller. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add enable_remote_dev_reset generic parameterMoshe Shemesh1-0/+5
The enable_remote_dev_reset devlink param flags that the host admin allows device resets that can be initiated by other hosts. This parameter is useful for setups where a device is shared by different hosts, such as multi-host setup. Once the user set this parameter to false, the driver should NACK any attempt to reset the device while the driver is loaded. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add remote reload statsMoshe Shemesh1-6/+54
Add remote reload stats to hold the history of actions performed due devlink reload commands initiated by remote host. For example, in case firmware activation with reset finished successfully but was initiated by remote host. The function devlink_remote_reload_actions_performed() is exported to enable drivers update on remote reload actions performed as it was not initiated by their own devlink instance. Expose devlink remote reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 remote_reload: driver_reinit 0 fw_activate 0 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 remote_reload: driver_reinit 1 fw_activate 1 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 0, "fw_activate": 0, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 }, "remote_reload": { "driver_reinit": 1, "fw_activate": 1, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add reload statsMoshe Shemesh1-0/+90
Add reload stats to hold the history per reload action type and limit. For example, the number of times fw_activate has been performed on this device since the driver module was added or if the firmware activation was performed with or without reset. Add devlink notification on stats update. Expose devlink reload stats to the user through devlink dev get command. Examples: $ devlink dev show pci/0000:82:00.0: stats: reload: driver_reinit 2 fw_activate 1 fw_activate_no_reset 0 pci/0000:82:00.1: stats: reload: driver_reinit 1 fw_activate 0 fw_activate_no_reset 0 $ devlink dev show -jp { "dev": { "pci/0000:82:00.0": { "stats": { "reload": { "driver_reinit": 2, "fw_activate": 1, "fw_activate_no_reset": 0 } } }, "pci/0000:82:00.1": { "stats": { "reload": { "driver_reinit": 1, "fw_activate": 0, "fw_activate_no_reset": 0 } } } } } Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add devlink reload limit optionMoshe Shemesh1-6/+86
Add reload limit to demand restrictions on reload actions. Reload limits supported: no_reset: No reset allowed, no down time allowed, no link flap and no configuration is lost. By default reload limit is unspecified and so no constraints on reload actions are required. Some combinations of action and limit are invalid. For example, driver can not reinitialize its entities without any downtime. The no_reset reload limit will have usecase in this patchset to implement restricted fw_activate on mlx5. Have the uapi parameter of reload limit ready for future support of multiselection. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Add reload action option to devlink reload commandMoshe Shemesh1-6/+92
Add devlink reload action to allow the user to request a specific reload action. The action parameter is optional, if not specified then devlink driver re-init action is used (backward compatible). Note that when required to do firmware activation some drivers may need to reload the driver. On the other hand some drivers may need to reset the firmware to reinitialize the driver entities. Therefore, the devlink reload command returns the actions which were actually performed. Reload actions supported are: driver_reinit: driver entities re-initialization, applying devlink-param and devlink-resource values. fw_activate: firmware activate. command examples: $devlink dev reload pci/0000:82:00.0 action driver_reinit reload_actions_performed: driver_reinit $devlink dev reload pci/0000:82:00.0 action fw_activate reload_actions_performed: driver_reinit fw_activate Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-09devlink: Change devlink_reload_supported() param typeMoshe Shemesh1-7/+7
Change devlink_reload_supported() function to get devlink_ops pointer param instead of devlink pointer param. This change will be used in the next patch to check if devlink reload is supported before devlink instance is allocated. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-04net: devlink: Add support for port regionsAndrew Lunn1-26/+224
Allow regions to be registered to a devlink port. The same netlink API is used, but the port index is provided to indicate when a region is a port region as opposed to a device region. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: devlink: Add unused port flavourAndrew Lunn1-1/+3
Not all ports of a switch need to be used, particularly in embedded systems. Add a port flavour for ports which physically exist in the switch, but are not connected to the front panel etc, and so are unused. By having unused ports present in devlink, it gives a more accurate representation of the hardware. It also allows regions to be associated to such ports, so allowing, for example, to determine unused ports are correctly powered off, or to compare probable reset defaults of unused ports to used ports experiences issues. Actually registering unused ports and setting the flavour to unused is optional. The DSA core will register all such switch ports, but such ports are expected to be limited in number. Bigger ASICs may decide not to list unused ports. v2: Expand the description about why it is useful Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02genetlink: move to smaller ops wherever possibleJakub Kicinski1-3/+3
Bulk of the genetlink users can use smaller ops, move them. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02devlink: add .trap_group_action_set() callbackIoana Ciornei1-0/+18
Add a new devlink callback, .trap_group_action_set(), which can be used by device drivers which do not support controlling the action (drop, trap) on each trap but rather on the entire group trap. If this new callback is populated, it will take precedence over the .trap_action_set() callback when the user requests a change of all the traps in a group. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02devlink: add parser error drop packet trapsIoana Ciornei1-0/+17
Add parser error drop packet traps, so that capable device driver could register them with devlink. The new packet trap group holds any drops of packets which were marked by the device as erroneous during header parsing. Add documentation for every added packet trap and packet trap group. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30drop_monitor: Filter control packets in drop monitorIdo Schimmel1-7/+1
Previously, devlink called into drop monitor in order to report hardware originated drops / exceptions. devlink intentionally filtered control packets and did not pass them to drop monitor as they were not dropped by the underlying hardware. Now drop monitor registers its probe on a generic 'devlink_trap_report' tracepoint and should therefore perform this filtering itself instead of having devlink do that. Add the trap type as metadata and have drop monitor ignore control packets. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30drop_monitor: Convert to using devlink tracepointIdo Schimmel1-24/+0
Convert drop monitor to use the recently introduced 'devlink_trap_report' tracepoint instead of having devlink call into drop monitor. This is both consistent with software originated drops ('kfree_skb' tracepoint) and also allows drop monitor to be built as a module and still report hardware originated drops. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30devlink: Add a tracepoint for trap reportsIdo Schimmel1-0/+25
Add a tracepoint for trap reports so that drop monitor could register its probe on it. Use trace_devlink_trap_report_enabled() to avoid wasting cycles setting the trap metadata if the tracepoint is not enabled. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: introduce flash update overwrite maskJacob Keller1-1/+16
Sections of device flash may contain settings or device identifying information. When performing a flash update, it is generally expected that these settings and identifiers are not overwritten. However, it may sometimes be useful to allow overwriting these fields when performing a flash update. Some examples include, 1) customizing the initial device config on first programming, such as overwriting default device identifying information, or 2) reverting a device configuration to known good state provided in the new firmware image, or 3) in case it is suspected that current firmware logic for managing the preservation of fields during an update is broken. Although some devices are able to completely separate these types of settings and fields into separate components, this is not true for all hardware. To support controlling this behavior, a new DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK is defined. This is an nla_bitfield32 which will define what subset of fields in a component should be overwritten during an update. If no bits are specified, or of the overwrite mask is not provided, then an update should not overwrite anything, and should maintain the settings and identifiers as they are in the previous image. If the overwrite mask has the DEVLINK_FLASH_OVERWRITE_SETTINGS bit set, then the device should be configured to overwrite any of the settings in the requested component with settings found in the provided image. Similarly, if the DEVLINK_FLASH_OVERWRITE_IDENTIFIERS bit is set, the device should be configured to overwrite any device identifiers in the requested component with the identifiers from the image. Multiple overwrite modes may be combined to indicate that a combination of the set of fields that should be overwritten. Drivers which support the new overwrite mask must set the DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK in the supported_flash_update_params field of their devlink_ops. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: convert flash_update to use params structureJacob Keller1-6/+8
The devlink core recently gained support for checking whether the driver supports a flash_update parameter, via `supported_flash_update_params`. However, parameters are specified as function arguments. Adding a new parameter still requires modifying the signature of the .flash_update callback in all drivers. Convert the .flash_update function to take a new `struct devlink_flash_update_params` instead. By using this structure, and the `supported_flash_update_params` bit field, a new parameter to flash_update can be added without requiring modification to existing drivers. As before, all parameters except file_name will require driver opt-in. Because file_name is a necessary field to for the flash_update to make sense, no "SUPPORTED" bitflag is provided and it is always considered valid. All future additional parameters will require a new bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Bin Luo <luobin9@huawei.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Danielle Ratson <danieller@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25devlink: check flash_update parameter support in net coreJacob Keller1-2/+13
When implementing .flash_update, drivers which do not support per-component update are manually checking the component parameter to verify that it is NULL. Without this check, the driver might accept an update request with a component specified even though it will not honor such a request. Instead of having each driver check this, move the logic into net/core/devlink.c, and use a new `supported_flash_update_params` field in the devlink_ops. Drivers which will support per-component update must now specify this by setting DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT in the supported_flash_update_params in their devlink_ops. This helps ensure that drivers do not forget to check for a NULL component if they do not support per-component update. This also enables a slightly better error message by enabling the core stack to set the netlink bad attribute message to indicate precisely the unsupported attribute in the message. Going forward, any new additional parameter to flash update will require a bit in the supported_flash_update_params bitfield. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Bin Luo <luobin9@huawei.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Ido Schimmel <idosch@mellanox.com> Cc: Danielle Ratson <danieller@mellanox.com> Cc: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22devlink: Enhance policy to validate port type input valueParav Pandit1-3/+2
Use range checking facility of nla_policy to validate port type attribute input value is valid or not. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22devlink: Enhance policy to validate eswitch mode valueParav Pandit1-1/+2
Use range checking facility of nla_policy to validate eswitch mode input attribute value is valid or not. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: devlink: region: Pass the region ops to the snapshot functionAndrew Lunn1-1/+1
Pass the region to be snapshotted to the function performing the snapshot. This allows one function to operate on numerous regions. v4: Add missing kerneldoc for ICE Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18devlink: collect flash notify params into a structShannon Nelson1-23/+31
The dev flash status notify function parameter lists are getting rather long, so add a struct to be filled and passed rather than continuously changing the function signatures. Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18devlink: add timeout information to status_notifyShannon Nelson1-6/+23
Add a timeout element to the DEVLINK_CMD_FLASH_UPDATE_STATUS netlink message for use by a userland utility to show that a particular firmware flash activity may take a long but bounded time to finish. Also add a handy helper for drivers to make use of the new timeout value. UI usage hints: - if non-zero, add timeout display to the end of the status line [component] status_msg ( Xm Ys : Am Bs ) using the timeout value for Am Bs and updating the Xm Ys every second - if the timeout expires while awaiting the next update, display something like [component] status_msg ( timeout reached : Am Bs ) - if new status notify messages are received, remove the timeout and start over Signed-off-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-15devlink: introduce the health reporter test commandJiri Pirko1-0/+30
Introduce a test command for health reporters. User might use this command to trigger test event on a reporter if the reporter supports it. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10devlink: don't crash if netdev is NULLJakub Kicinski1-8/+20
Following change will add support for a corner case where we may not have a netdev to pass to devlink_port_type_eth_set() but we still want to set port type. This is definitely a corner case, and drivers should not normally pass NULL netdev - print a warning message when this happens. Sadly for other port types (ib) switches don't have a device reference, the way we always do for Ethernet, so we can't put the warning in __devlink_port_type_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09devlink: Use controller while building phys_port_nameParav Pandit1-0/+14
Now that controller number attribute is available, use it when building phsy_port_name for external controller ports. An example devlink port and representor netdev name consist of controller annotation for external controller with controller number = 1, for a VF 1 of PF 0: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0c1pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0c1pf0vf1", "flavour": "pcivf", "controller": 1, "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Controller number annotation is skipped for non external controllers to maintain backward compatibility. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09devlink: Introduce controller numberParav Pandit1-9/+14
A devlink port may be for a controller consist of PCI device. A devlink instance holds ports of two types of controllers. (1) controller discovered on same system where eswitch resides This is the case where PCI PF/VF of a controller and devlink eswitch instance both are located on a single system. (2) controller located on external host system. This is the case where a controller is located in one system and its devlink eswitch ports are located in a different system. When a devlink eswitch instance serves the devlink ports of both controllers together, PCI PF/VF numbers may overlap. Due to this a unique phys_port_name cannot be constructed. For example in below such system controller-0 and controller-1, each has PCI PF pf0 whose eswitch ports can be present in controller-0. These results in phys_port_name as "pf0" for both. Similar problem exists for VFs and upcoming Sub functions. An example view of two controller systems: --------------------------------------------------------- | | | --------- --------- ------- ------- | ----------- | | vf(s) | | sf(s) | |vf(s)| |sf(s)| | | server | | ------- ----/---- ---/----- ------- ---/--- ---/--- | | pci rc |=== | pf0 |______/________/ | pf1 |___/_______/ | | connect | | ------- ------- | ----------- | | controller_num=1 (no eswitch) | ------|-------------------------------------------------- (internal wire) | --------------------------------------------------------- | devlink eswitch ports and reps | | ----------------------------------------------------- | | |ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 | ctrl-0 |ctrl-0 | | | |pf0 | pf0vfN | pf0sfN | pf1 | pf1vfN |pf1sfN | | | ----------------------------------------------------- | | |ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 | ctrl-1 |ctrl-1 | | | |pf1 | pf1vfN | pf1sfN | pf1 | pf1vfN |pf0sfN | | | ----------------------------------------------------- | | | | | | --------- --------- ------- ------- | | | vf(s) | | sf(s) | |vf(s)| |sf(s)| | | ------- ----/---- ---/----- ------- ---/--- ---/--- | | | pf0 |______/________/ | pf1 |___/_______/ | | ------- ------- | | | | local controller_num=0 (eswitch) | --------------------------------------------------------- An example devlink port for external controller with controller number = 1 for a VF 1 of PF 0: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf controller 1 pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "controller": 1, "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09devlink: Introduce external controller flagParav Pandit1-2/+10
A devlink eswitch port may represent PCI PF/VF ports of a controller. A controller either located on same system or it can be an external controller located in host where such NIC is plugged in. Add the ability for driver to specify if a port is for external controller. Use such flag in the mlx5_core driver. An example of an external controller having VF1 of PF0 belong to controller 1. $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev ens2f0pf0vf1 flavour pcivf pfnum 0 vfnum 1 external true splittable false function: hw_addr 00:00:00:00:00:00 $ devlink port show pci/0000:06:00.0/2 -jp { "port": { "pci/0000:06:00.0/2": { "type": "eth", "netdev": "ens2f0pf0vf1", "flavour": "pcivf", "pfnum": 0, "vfnum": 1, "external": true, "splittable": false, "function": { "hw_addr": "00:00:00:00:00:00" } } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-24devlink: Protect devlink port list traversalParav Pandit1-0/+3
Cited patch in fixes tag misses to protect port list traversal while traversing per port reporter list. Protect it using devlink instance lock. Fixes: f4f541660121 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24devlink: Fix per port reporter fields initializationParav Pandit1-4/+4
Cited patch in fixes tag initializes reporters_list and reporters_lock of a devlink port after devlink port is added to the list. Once port is added to the list, devlink_nl_cmd_health_reporter_get_dumpit() can access the uninitialized mutex and reporters list head. Fix it by initializing port reporters field before adding port to the list. Fixes: f4f541660121 ("devlink: Implement devlink health reporters on per-port basis") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-16net: devlink: Remove overzealous WARN_ON with snapshotsAndrew Lunn1-1/+1
It is possible to trigger this WARN_ON from user space by triggering a devlink snapshot with an ID which already exists. We don't need both -EEXISTS being reported and spamming the kernel log. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03devlink: Pass extack when setting trap's action and group's parametersIdo Schimmel1-3/+5
A later patch will refuse to set the action of certain traps in mlxsw and also to change the policer binding of certain groups. Pass extack so that failure could be communicated clearly to user space. Reviewed-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-03devlink: Add early_drop trapAmit Cohen1-0/+1
Add the packet trap that can report packets that were ECN marked due to RED AQM. Signed-off-by: Amit Cohen <amitc@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-6/+19
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-30devlink: ignore -EOPNOTSUPP errors on dumpitJakub Kicinski1-6/+18
Number of .dumpit functions try to ignore -EOPNOTSUPP errors. Recent change missed that, and started reporting all errors but -EMSGSIZE back from dumps. This leads to situation like this: $ devlink dev info devlink answers: Operation not supported Dump should not report an error just because the last device to be queried could not provide an answer. To fix this and avoid similar confusion make sure we clear err properly, and not leave it set to an error if we don't terminate the iteration. Fixes: c62c2cfb801b ("net: devlink: don't ignore errors during dumpit") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-29mlxsw: spectrum: Use different trap group for externally routed packetsIdo Schimmel1-0/+1
Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22devlink: Always use user_ptr[0] for devlink and simplify post_doitParav Pandit1-94/+70
Currently devlink instance is searched on all doit() operations. But it is optionally stored into user_ptr[0]. This requires rediscovering devlink again doing post_doit(). Few devlink commands related to port shared buffers needs 3 pointers (devlink, devlink_port, and devlink_sb) while executing doit commands. Though devlink pointer can be derived from the devlink_port during post_doit() operation when doit() callback has acquired devlink instance lock, relying on such scheme to access devlik pointer makes code very fragile. Hence, to avoid ambiguity in post_doit() and to avoid searching devlink instance again, simplify code by always storing devlink instance in user_ptr[0] and derive devlink_sb pointer in their respective callback routines. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Constify devlink instance pointerParav Pandit1-1/+1
Constify devlink instance pointer while checking if reload operation is supported or not. This helps to review the scope of checks done in reload. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Avoid duplicate check for reload enabled flagParav Pandit1-1/+1
Reload operation is enabled or not is already checked by devlink_reload(). Hence, remove the duplicate check from devlink_nl_cmd_reload(). Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21devlink: Do not hold devlink mutex when initializing devlink fieldsParav Pandit1-1/+1
There is no need to hold a device global lock when initializing devlink device fields of a devlink instance which is not yet part of the devices list. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13devlink: Fix use-after-free when destroying health reportersIdo Schimmel1-4/+8
Dereferencing the reporter after it was destroyed in order to unlock the reporters lock results in a use-after-free [1]. Fix this by storing a pointer to the lock in a local variable before destroying the reporter. [1] ================================================================== BUG: KASAN: use-after-free in devlink_health_reporter_destroy+0x15c/0x1b0 net/core/devlink.c:5476 Read of size 8 at addr ffff8880650fd020 by task syz-executor.1/904 CPU: 0 PID: 904 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #35 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 devlink_health_reporter_destroy+0x15c/0x1b0 net/core/devlink.c:5476 nsim_dev_health_exit+0x8b/0xe0 drivers/net/netdevsim/health.c:317 nsim_dev_reload_destroy+0x7f/0x110 drivers/net/netdevsim/dev.c:1134 nsim_dev_reload_down+0x6e/0xd0 drivers/net/netdevsim/dev.c:712 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4748ad Code: Bad RIP value. RSP: 002b:00007fd0358adc38 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000056bf00 RCX: 00000000004748ad RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004d1a4b R14: 00007fd0358ae6b4 R15: 00007fd0358add80 Allocated by task 539: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] __devlink_health_reporter_create+0x91/0x2f0 net/core/devlink.c:5359 devlink_health_reporter_create+0xa1/0x170 net/core/devlink.c:5431 nsim_dev_health_init+0x95/0x3a0 drivers/net/netdevsim/health.c:279 nsim_dev_probe+0xb1e/0xeb0 drivers/net/netdevsim/dev.c:1086 really_probe+0x287/0x6d0 drivers/base/dd.c:525 driver_probe_device+0xfe/0x1d0 drivers/base/dd.c:701 __device_attach_driver+0x21e/0x290 drivers/base/dd.c:807 bus_for_each_drv+0x161/0x1e0 drivers/base/bus.c:431 __device_attach+0x21a/0x360 drivers/base/dd.c:873 bus_probe_device+0x1e6/0x290 drivers/base/bus.c:491 device_add+0xaf2/0x1b00 drivers/base/core.c:2680 nsim_bus_dev_new drivers/net/netdevsim/bus.c:336 [inline] new_device_store+0x374/0x590 drivers/net/netdevsim/bus.c:215 bus_attr_store+0x75/0xa0 drivers/base/bus.c:122 sysfs_kf_write+0x113/0x170 fs/sysfs/file.c:138 kernfs_fop_write+0x25d/0x480 fs/kernfs/file.c:315 __vfs_write+0x7c/0x100 fs/read_write.c:495 vfs_write+0x265/0x5e0 fs/read_write.c:559 ksys_write+0x12d/0x250 fs/read_write.c:612 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 904: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4063 devlink_health_reporter_free net/core/devlink.c:5449 [inline] devlink_health_reporter_put+0xb7/0xf0 net/core/devlink.c:5456 __devlink_health_reporter_destroy net/core/devlink.c:5463 [inline] devlink_health_reporter_destroy+0x11b/0x1b0 net/core/devlink.c:5475 nsim_dev_health_exit+0x8b/0xe0 drivers/net/netdevsim/health.c:317 nsim_dev_reload_destroy+0x7f/0x110 drivers/net/netdevsim/dev.c:1134 nsim_dev_reload_down+0x6e/0xd0 drivers/net/netdevsim/dev.c:712 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff8880650fd000 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 32 bytes inside of 512-byte region [ffff8880650fd000, ffff8880650fd200) The buggy address belongs to the page: page:ffffea0001943f00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880650ff800 head:ffffea0001943f00 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 ffffea0001a06a08 ffffea00010ad308 ffff88806c402500 raw: ffff8880650ff800 0000000000100009 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880650fcf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8880650fcf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880650fd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880650fd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880650fd100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 3c5584bf0a04 ("devlink: Rework devlink health reporter destructor") Fixes: 15c724b997a8 ("devlink: Add devlink health port reporters API") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10devlink: Add devlink health port reporters APIVladyslav Tarasiuk1-0/+50
In order to use new devlink port health reporters infrastructure, add corresponding constructor and destructor functions. Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 09:23:09 +0000