summaryrefslogtreecommitdiffstats
path: root/net/ceph
AgeCommit message (Collapse)AuthorFilesLines
2018-08-13crush: fix using plain integer as NULL warningYueHaibing1-2/+2
Fixes the following sparse warnings: net/ceph/crush/mapper.c:517:76: warning: Using plain integer as NULL pointer net/ceph/crush/mapper.c:728:68: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-13libceph: remove unnecessary non NULL check for request_keyYueHaibing1-1/+1
request_key never return NULL,so no need do non-NULL check. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()Ilya Dryomov1-2/+4
Allow for extending ceph_x_authorize_reply in the future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: check authorizer reply/challenge length before readingIlya Dryomov1-0/+7
Avoid scribbling over memory if the received reply/challenge is larger than the buffer supplied with the authorizer. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: implement CEPHX_V2 calculation modeIlya Dryomov1-17/+56
Derive the signature from the entire buffer (both AES cipher blocks) instead of using just the first half of the first block, leaving out data_crc entirely. This addresses CVE-2018-1129. Link: http://tracker.ceph.com/issues/24837 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: add authorizer challengeIlya Dryomov5-6/+117
When a client authenticates with a service, an authorizer is sent with a nonce to the service (ceph_x_authorize_[ab]) and the service responds with a mutation of that nonce (ceph_x_authorize_reply). This lets the client verify the service is who it says it is but it doesn't protect against a replay: someone can trivially capture the exchange and reuse the same authorizer to authenticate themselves. Allow the service to reject an initial authorizer with a random challenge (ceph_x_authorize_challenge). The client then has to respond with an updated authorizer proving they are able to decrypt the service's challenge and that the new authorizer was produced for this specific connection instance. The accepting side requires this challenge and response unconditionally if the client side advertises they have CEPHX_V2 feature bit. This addresses CVE-2018-1128. Link: http://tracker.ceph.com/issues/24836 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: factor out encrypt_authorizer()Ilya Dryomov1-13/+36
Will be used for encrypting both the initial and updated authorizers. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: factor out __ceph_x_decrypt()Ilya Dryomov1-9/+24
Will be used for decrypting the server challenge which is only preceded by ceph_x_encrypt_header. Drop struct_v check to allow for extending ceph_x_encrypt_header in the future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: factor out __prepare_write_connect()Ilya Dryomov1-9/+12
Will be used for sending ceph_msg_connect with an updated authorizer, after the server challenges the initial authorizer. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02libceph: store ceph_auth_handshake pointer in ceph_connectionIlya Dryomov1-28/+26
We already copy authorizer_reply_buf and authorizer_reply_buf_len into ceph_connection. Factoring out __prepare_write_connect() requires two more: authorizer_buf and authorizer_buf_len. Store the pointer to the handshake in con->auth rather than piling on. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2018-08-02ceph: fix whitespaceStephen Hemminger8-9/+1
Remove blank lines at end of file and trailing whitespace. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: use timespec64 for r_mtimeArnd Bergmann1-4/+4
The request mtime field is used all over ceph, and is currently represented as a 'timespec' structure in Linux. This changes it to timespec64 to allow times beyond 2038, modifying all users at the same time. [ Remove now redundant ts variable in writepage_nounlock(). ] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: use timespec64 in for keepalive2 and ticket validityArnd Bergmann4-20/+20
ceph_con_keepalive_expired() is the last user of timespec_add() and some of the last uses of ktime_get_real_ts(). Replacing this with timespec64 based interfaces lets us remove that deprecated API. I'm introducing new ceph_encode_timespec64()/ceph_decode_timespec64() here that take timespec64 structures and convert to/from ceph_timespec, which is defined to have an unsigned 32-bit tv_sec member. This extends the range of valid times to year 2106, avoiding the year 2038 overflow. The ceph file system portion still uses the old functions for inode timestamps, this will be done separately after the VFS layer is converted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: amend "bad option arg" error messageIlya Dryomov1-2/+1
Don't mention "mount" -- in the rbd case it is "mapping". Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: stop parsing when a bad int arg is detectedChengguang Xu1-4/+4
There is no reason to continue option parsing after detecting bad option. [ Return match_int() errors from ceph_parse_options() to match the behaviour of parse_rbd_opts_token() and parse_fsopt_token(). ] Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02libceph: make ceph_osdc_notify{,_ack}() payload_len u32Ilya Dryomov1-4/+4
The wire format dictates that payload_len fits into 4 bytes. Take u32 instead of size_t to reflect that. All callers pass a small integer, so no changes required. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-15Merge tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds3-117/+149
Pull ceph updates from Ilya Dryomov: "The main piece is a set of libceph changes that revamps how OSD requests are aborted, improving CephFS ENOSPC handling and making "umount -f" actually work (Zheng and myself). The rest is mostly mount option handling cleanups from Chengguang and assorted fixes from Zheng, Luis and Dongsheng. * tag 'ceph-for-4.18-rc1' of git://github.com/ceph/ceph-client: (31 commits) rbd: flush rbd_dev->watch_dwork after watch is unregistered ceph: update description of some mount options ceph: show ino32 if the value is different with default ceph: strengthen rsize/wsize/readdir_max_bytes validation ceph: fix alignment of rasize ceph: fix use-after-free in ceph_statfs() ceph: prevent i_version from going back ceph: fix wrong check for the case of updating link count libceph: allocate the locator string with GFP_NOFAIL libceph: make abort_on_full a per-osdc setting libceph: don't abort reads in ceph_osdc_abort_on_full() libceph: avoid a use-after-free during map check libceph: don't warn if req->r_abort_on_full is set libceph: use for_each_request() in ceph_osdc_abort_on_full() libceph: defer __complete_request() to a workqueue libceph: move more code into __complete_request() libceph: no need to call flush_workqueue() before destruction ceph: flush pending works before shutdown super ceph: abort osd requests on force umount libceph: introduce ceph_osdc_abort_requests() ...
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook2-4/+5
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for kmalloc()-familyKees Cook2-5/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This patch makes the changes for kmalloc()-family (and kvmalloc()-family) uses. It was done via automatic conversion with manual review for the "CHECKME" non-standard cases noted below, using the following Coccinelle script: // pkey_cache = kmalloc(sizeof *pkey_cache + tprops->pkey_tbl_len * // sizeof *pkey_cache->table, GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "kmalloc|kzalloc|kvmalloc|kvzalloc"; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04libceph: allocate the locator string with GFP_NOFAILIlya Dryomov2-20/+9
calc_target() isn't supposed to fail with anything but POOL_DNE, in which case we report that the pool doesn't exist and fail the request with -ENOENT. Doing this for -ENOMEM is at the very least confusing and also harmful -- as the preceding requests complete, a short-lived locator string allocation is likely to succeed after a wait. (We used to call ceph_object_locator_to_pg() for a pi lookup. In theory that could fail with -ENOENT, hence the "ret != -ENOENT" warning being removed.) Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04libceph: make abort_on_full a per-osdc settingIlya Dryomov1-5/+4
The intent behind making it a per-request setting was that it would be set for writes, but not for reads. As it is, the flag is set for all fs/ceph requests except for pool perm check stat request (technically a read). ceph_osdc_abort_on_full() skips reads since the previous commit and I don't see a use case for marking individual requests. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: don't abort reads in ceph_osdc_abort_on_full()Ilya Dryomov1-1/+2
Don't consider reads for aborting and use ->base_oloc instead of ->target_oloc, as done in __submit_request(). Strictly speaking, we shouldn't be aborting FULL_TRY/FULL_FORCE writes either. But, there is an inconsistency in FULL_TRY/FULL_FORCE handling on the OSD side [1], so given that neither of these is used in the kernel client, leave it for when the OSD behaviour is sorted out. [1] http://tracker.ceph.com/issues/24339 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: avoid a use-after-free during map checkIlya Dryomov1-1/+1
Sending map check after complete_request() was called is not only useless, but can lead to a use-after-free as req->r_kref decrement in __complete_request() races with map check code. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: don't warn if req->r_abort_on_full is setIlya Dryomov1-4/+6
The "FULL or reached pool quota" warning is there to explain paused requests. No need to emit it if pausing isn't going to occur. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: use for_each_request() in ceph_osdc_abort_on_full()Ilya Dryomov1-53/+26
Scanning the trees just to see if there is anything to abort is unnecessary -- all that is needed here is to update the epoch barrier first, before we start aborting. Simplify and do the update inside the loop before calling abort_request() for the first time. The switch to for_each_request() also fixes a bug: homeless requests weren't even considered for aborting. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: defer __complete_request() to a workqueueIlya Dryomov1-1/+18
In the common case, req->r_callback is called by handle_reply() on the ceph-msgr worker thread without any locks. If handle_reply() fails, it is called with both osd->lock and osdc->lock. In the map check case, it is called with just osdc->lock but held for write. Finally, if the request is aborted because of -ENOSPC or by ceph_osdc_abort_requests(), it is called directly on the submitter's thread, again with both locks. req->r_callback on the submitter's thread is relatively new (introduced in 4.12) and ripe for deadlocks -- e.g. writeback worker thread waiting on itself: inode_wait_for_writeback+0x26/0x40 evict+0xb5/0x1a0 iput+0x1d2/0x220 ceph_put_wrbuffer_cap_refs+0xe0/0x2c0 [ceph] writepages_finish+0x2d3/0x410 [ceph] __complete_request+0x26/0x60 [libceph] complete_request+0x2e/0x70 [libceph] __submit_request+0x256/0x330 [libceph] submit_request+0x2b/0x30 [libceph] ceph_osdc_start_request+0x25/0x40 [libceph] ceph_writepages_start+0xdfe/0x1320 [ceph] do_writepages+0x1f/0x70 __writeback_single_inode+0x45/0x330 writeback_sb_inodes+0x26a/0x600 __writeback_inodes_wb+0x92/0xc0 wb_writeback+0x274/0x330 wb_workfn+0x2d5/0x3b0 Defer __complete_request() to a workqueue in all failure cases so it's never on the same thread as ceph_osdc_start_request() and always called with no locks held. Link: http://tracker.ceph.com/issues/23978 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: move more code into __complete_request()Ilya Dryomov1-8/+6
Move req->r_completion wake up and req->r_kref decrement into __complete_request(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-06-04libceph: no need to call flush_workqueue() before destructionIlya Dryomov1-1/+0
destroy_workqueue() drains the workqueue before proceeding with destruction. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04libceph: introduce ceph_osdc_abort_requests()Ilya Dryomov1-5/+62
This will be used by the filesystem for "umount -f". Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04libceph: use MSG_TRUNC for discarding received bytesIlya Dryomov1-13/+8
Avoid a copy into the "skip buffer". Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-04libceph: get rid of more_kvec in try_write()Ilya Dryomov1-7/+3
All gotos to "more" are conditioned on con->state == OPEN, but the only thing "more" does is opening the socket if con->state == PREOPEN. Kill that label and rename "more_kvec" to "more". Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2018-06-04libceph, rbd: add error handling for osd_req_op_cls_init()Chengguang Xu1-3/+9
Add proper error handling for osd_req_op_cls_init() to replace BUG_ON statement when failing from memory allocation. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-05-10libceph: add osd_req_op_extent_osd_data_bvecs()Ilya Dryomov1-4/+23
... and store num_bvecs for client code's convenience. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
2018-04-26libceph: validate con->state at the top of try_write()Ilya Dryomov1-0/+7
ceph_con_workfn() validates con->state before calling try_read() and then try_write(). However, try_read() temporarily releases con->mutex, notably in process_message() and ceph_con_in_msg_alloc(), opening the window for ceph_con_close() to sneak in, close the connection and release con->sock. When try_write() is called on the assumption that con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock gets passed to the networking stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: selinux_socket_sendmsg+0x5/0x20 Make sure con->state is valid at the top of try_write() and add an explicit BUG_ON for this, similar to try_read(). Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/23706 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2018-04-24libceph: reschedule a tick in finish_hunting()Ilya Dryomov1-0/+1
If we go without an established session for a while, backoff delay will climb to 30 seconds. The keepalive timeout is also 30 seconds, so it's pretty easily hit after a prolonged hunting for a monitor: we don't get a chance to send out a keepalive in time, which means we never get back a keepalive ack in time, cutting an established session and attempting to connect to a different monitor every 30 seconds: [Sun Apr 1 23:37:05 2018] libceph: mon0 10.80.20.99:6789 session established [Sun Apr 1 23:37:36 2018] libceph: mon0 10.80.20.99:6789 session lost, hunting for new mon [Sun Apr 1 23:37:36 2018] libceph: mon2 10.80.20.103:6789 session established [Sun Apr 1 23:38:07 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon [Sun Apr 1 23:38:07 2018] libceph: mon1 10.80.20.100:6789 session established [Sun Apr 1 23:38:37 2018] libceph: mon1 10.80.20.100:6789 session lost, hunting for new mon [Sun Apr 1 23:38:37 2018] libceph: mon2 10.80.20.103:6789 session established [Sun Apr 1 23:39:08 2018] libceph: mon2 10.80.20.103:6789 session lost, hunting for new mon The regular keepalive interval is 10 seconds. After ->hunting is cleared in finish_hunting(), call __schedule_delayed() to ensure we send out a keepalive after 10 seconds. Cc: stable@vger.kernel.org # 4.7+ Link: http://tracker.ceph.com/issues/23537 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2018-04-24libceph: un-backoff on tick when we have a authenticated sessionIlya Dryomov1-3/+10
This means that if we do some backoff, then authenticate, and are healthy for an extended period of time, a subsequent failure won't leave us starting our hunting sequence with a large backoff. Mirrors ceph.git commit d466bc6e66abba9b464b0b69687cf45c9dccf383. Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2018-04-10Merge tag 'ceph-for-4.17-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds9-168/+453
Pull ceph updates from Ilya Dryomov: "The big ticket items are: - support for rbd "fancy" striping (myself). The striping feature bit is now fully implemented, allowing mapping v2 images with non-default striping patterns. This completes support for --image-format 2. - CephFS quota support (Luis Henriques and Zheng Yan). This set is based on the new SnapRealm code in the upcoming v13.y.z ("Mimic") release. Quota handling will be rejected on older filesystems. - memory usage improvements in CephFS (Chengguang Xu). Directory specific bits have been split out of ceph_file_info and some effort went into improving cap reservation code to avoid OOM crashes. Also included a bunch of assorted fixes all over the place from Chengguang and others" * tag 'ceph-for-4.17-rc1' of git://github.com/ceph/ceph-client: (67 commits) ceph: quota: report root dir quota usage in statfs ceph: quota: add counter for snaprealms with quota ceph: quota: cache inode pointer in ceph_snap_realm ceph: fix root quota realm check ceph: don't check quota for snap inode ceph: quota: update MDS when max_bytes is approaching ceph: quota: support for ceph.quota.max_bytes ceph: quota: don't allow cross-quota renames ceph: quota: support for ceph.quota.max_files ceph: quota: add initial infrastructure to support cephfs quotas rbd: remove VLA usage rbd: fix spelling mistake: "reregisteration" -> "reregistration" ceph: rename function drop_leases() to a more descriptive name ceph: fix invalid point dereference for error case in mdsc destroy ceph: return proper bool type to caller instead of pointer ceph: optimize memory usage ceph: optimize mds session register libceph, ceph: add __init attribution to init funcitons ceph: filter out used flags when printing unused open flags ceph: don't wait on writeback when there is no more dirty pages ...
2018-04-02ceph: quota: add initial infrastructure to support cephfs quotasLuis Henriques1-0/+1
This patch adds the infrastructure required to support cephfs quotas as it is currently implemented in the ceph fuse client. Cephfs quotas can be set on any directory, and can restrict the number of bytes or the number of files stored beneath that point in the directory hierarchy. Quotas are set using the extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', and can be removed by setting these attributes to '0'. Link: http://tracker.ceph.com/issues/22372 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: add __init attribution to init funcitonsChengguang Xu4-13/+8
Add __init attribution to the functions which are called only once during initiating/registering operations and deleting unnecessary symbol exports. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph: adding missing message types to ceph_msg_type_name()Chengguang Xu1-0/+5
Some of message types are missing in ceph_msg_type_name(), so just adding them for better understanding of output information. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph: fix misjudgement of maximum monitor numberChengguang Xu1-1/+1
num_mon should allow up to CEPH_MAX_MON in ceph_monmap_decode(). Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: change permission for readonly debugfs entriesChengguang Xu1-5/+5
Remove write permission for debugfs entries which only have readonly function. Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02ceph: add newline to end of debug message formatChengguang Xu1-1/+1
Some of dout format do not include newline in the end, fix for the files which are in fs/ceph and net/ceph directories, and changing printk to dout for printing debug info in super.c Signed-off-by: Chengguang Xu <cgxu519@icloud.com> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: move ceph_calc_file_object_mapping() to striper.cIlya Dryomov3-38/+37
ceph_calc_file_object_mapping() has nothing to do with osdmaps. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph: striping framework implementationIlya Dryomov2-0/+227
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph: handle zero-length data itemsIlya Dryomov1-2/+12
rbd needs this for null copyups -- if copyup data is all zeroes, we want to save some I/O and network bandwidth. See rbd_obj_issue_copyup() in the next commit. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>
2018-04-02libceph: introduce BVECS data typeIlya Dryomov2-0/+114
In preparation for rbd "fancy" striping, introduce ceph_bvec_iter for working with bio_vec array data buffers. The wrappers are trivial, but make it look similar to ceph_bio_iter. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, rbd: new bio handling code (aka don't clone bios)Ilya Dryomov2-72/+42
The reason we clone bios is to be able to give each object request (and consequently each ceph_osd_data/ceph_msg_data item) its own pointer to a (list of) bio(s). The messenger then initializes its cursor with cloned bio's ->bi_iter, so it knows where to start reading from/writing to. That's all the cloned bios are used for: to determine each object request's starting position in the provided data buffer. Introduce ceph_bio_iter to do exactly that -- store position within bio list (i.e. pointer to bio) + position within that bio (i.e. bvec_iter). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-02libceph, ceph: change ceph_calc_file_object_mapping() signatureIlya Dryomov2-10/+6
- make it void - xlen (object extent length) out parameter should be u32 because only a single stripe unit is mapped at a time Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org>