summaryrefslogtreecommitdiffstats
path: root/net/can/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2020-10-07can: add ISO 15765-2:2016 transport protocolOliver Hartkopp1-0/+3
CAN Transport Protocols offer support for segmented Point-to-Point communication between CAN nodes via two defined CAN Identifiers. As CAN frames can only transport a small amount of data bytes (max. 8 bytes for 'classic' CAN and max. 64 bytes for CAN FD) this segmentation is needed to transport longer PDUs as needed e.g. for vehicle diagnosis (UDS, ISO 14229) or IP-over-CAN traffic. This protocol driver implements data transfers according to ISO 15765-2:2016 for 'classic' CAN and CAN FD frame types. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20200928200404.82229-1-socketcan@hartkopp.net [mkl: Removed "WITH Linux-syscall-note" from isotp.c. Fixed indention, a checkpatch warning and typos. Replaced __u{8,32} by u{8,32}. Removed always false (optlen < 0) check in isotp_setsockopt().] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-09-04can: add support of SAE J1939 protocolThe j1939 authors1-0/+2
SAE J1939 is the vehicle bus recommended practice used for communication and diagnostics among vehicle components. Originating in the car and heavy-duty truck industry in the United States, it is now widely used in other parts of the world. J1939, ISO 11783 and NMEA 2000 all share the same high level protocol. SAE J1939 can be considered the replacement for the older SAE J1708 and SAE J1587 specifications. Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Elenita Hinds <ecathinds@gmail.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be> Signed-off-by: Maxime Jayat <maxime.jayat@mobile-devices.fr> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-17can: build proc support only if CONFIG_PROC_FS is activatedAlexander Aring1-1/+2
When building can subsystem with CONFIG_PROC_FS=n I detected some unused variables warning by using proc functions. In CAN the proc handling is nicely placed in one object file. This patch adds simple add a dependency on CONFIG_PROC_FS for CAN's proc.o file and corresponding static inline no-op functions. Signed-off-by: Alexander Aring <aar@pengutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> [mkl: provide static inline noops instead of using #ifdefs] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2011-09-16can-gw: add netlink based CAN routingOliver Hartkopp1-0/+3
This patch adds a CAN Gateway/Router to route (and modify) CAN frames. It is based on the PF_CAN core infrastructure for msg filtering and msg sending and can optionally modify routed CAN frames on the fly. CAN frames can *only* be routed between CAN network interfaces (one hop). They can be modified with AND/OR/XOR/SET operations as configured by the netlink configuration interface known e.g. from iptables. From the netlink view this can-gw implements RTM_{NEW|DEL|GET}ROUTE for PF_CAN. The CAN specific userspace tool to manage CAN routing entries can be found in the CAN utils http://svn.berlios.de/wsvn/socketcan/trunk/can-utils/cangw.c at the SocketCAN SVN on BerliOS. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-22Net: can: Makefile: Remove deprecated kbuild goal definitionsTracey Dent1-3/+3
Changed Makefile to use <modules>-y instead of <modules>-objs because -objs is deprecated and not mentioned in Documentation/kbuild/makefiles.txt. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CAN]: Add broadcast manager (bcm) protocolOliver Hartkopp1-0/+3
This patch adds the CAN broadcast manager (bcm) protocol. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CAN]: Add raw protocolOliver Hartkopp1-0/+3
This patch adds the CAN raw protocol. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[CAN]: Add PF_CAN core moduleOliver Hartkopp1-0/+6
This patch adds the CAN core functionality but no protocols or drivers. No protocol implementations are included here. They come as separate patches. Protocol numbers are already in include/linux/can.h. Signed-off-by: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> Signed-off-by: Urs Thuermann <urs.thuermann@volkswagen.de> Signed-off-by: David S. Miller <davem@davemloft.net>