summaryrefslogtreecommitdiffstats
path: root/net/bridge
AgeCommit message (Collapse)AuthorFilesLines
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+8
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-3/+3
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09net: change addr_list_lock back to static keyCong Wang1-0/+8
The dynamic key update for addr_list_lock still causes troubles, for example the following race condition still exists: CPU 0: CPU 1: (RCU read lock) (RTNL lock) dev_mc_seq_show() netdev_update_lockdep_key() -> lockdep_unregister_key() -> netif_addr_lock_bh() because lockdep doesn't provide an API to update it atomically. Therefore, we have to move it back to static keys and use subclass for nest locking like before. In commit 1a33e10e4a95 ("net: partially revert dynamic lockdep key changes"), I already reverted most parts of commit ab92d68fc22f ("net: core: add generic lockdep keys"). This patch reverts the rest and also part of commit f3b0a18bb6cb ("net: remove unnecessary variables and callback"). After this patch, addr_list_lock changes back to using static keys and subclasses to satisfy lockdep. Thanks to dev->lower_level, we do not have to change back to ->ndo_get_lock_subclass(). And hopefully this reduces some syzbot lockdep noises too. Reported-by: syzbot+f3a0e80c34b3fc28ac5e@syzkaller.appspotmail.com Cc: Taehee Yoo <ap420073@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds17-26/+1355
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-02Merge tag 'audit-pr-20200601' of ↵Linus Torvalds1-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Summary of the significant patches: - Record information about binds/unbinds to the audit multicast socket. This helps identify which processes have/had access to the information in the audit stream. - Cleanup and add some additional information to the netfilter configuration events collected by audit. - Fix some of the audit error handling code so we don't leak network namespace references" * tag 'audit-pr-20200601' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: add subj creds to NETFILTER_CFG record to audit: Replace zero-length array with flexible-array audit: make symbol 'audit_nfcfgs' static netfilter: add audit table unregister actions audit: tidy and extend netfilter_cfg x_tables audit: log audit netlink multicast bind and unbind audit: fix a net reference leak in audit_list_rules_send() audit: fix a net reference leak in audit_send_reply()
2020-06-02mm: remove the pgprot argument to __vmallocChristoph Hellwig1-4/+2
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv] Acked-by: Gao Xiang <xiang@kernel.org> [erofs] Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-01bridge: mrp: Add support for role MRAHoratiu Vultur4-21/+118
A node that has the MRA role, it can behave as MRM or MRC. Initially it starts as MRM and sends MRP_Test frames on both ring ports. If it detects that there are MRP_Test send by another MRM, then it checks if these frames have a lower priority than itself. In this case it would send MRP_Nack frames to notify the other node that it needs to stop sending MRP_Test frames. If it receives a MRP_Nack frame then it stops sending MRP_Test frames and starts to behave as a MRC but it would continue to monitor the MRP_Test frames send by MRM. If at a point the MRM stops to send MRP_Test frames it would get the MRM role and start to send MRP_Test frames. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01bridge: mrp: Set the priority of MRP instanceHoratiu Vultur4-1/+9
Each MRP instance has a priority, a lower value means a higher priority. The priority of MRP instance is stored in MRP_Test frame in this way all the MRP nodes in the ring can see other nodes priority. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01bridge: Avoid infinite loop when suppressing NS messages with invalid optionsIdo Schimmel1-0/+4
When neighbor suppression is enabled the bridge device might reply to Neighbor Solicitation (NS) messages on behalf of remote hosts. In case the NS message includes the "Source link-layer address" option [1], the bridge device will use the specified address as the link-layer destination address in its reply. To avoid an infinite loop, break out of the options parsing loop when encountering an option with length zero and disregard the NS message. This is consistent with the IPv6 ndisc code and RFC 4886 which states that "Nodes MUST silently discard an ND packet that contains an option with length zero" [2]. [1] https://tools.ietf.org/html/rfc4861#section-4.3 [2] https://tools.ietf.org/html/rfc4861#section-4.6 Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alla Segal <allas@mellanox.com> Tested-by: Alla Segal <allas@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-1/+8
xdp_umem.c had overlapping changes between the 64-bit math fix for the calculation of npgs and the removal of the zerocopy memory type which got rid of the chunk_size_nohdr member. The mlx5 Kconfig conflict is a case where we just take the net-next copy of the Kconfig entry dependency as it takes on the ESWITCH dependency by one level of indirection which is what the 'net' conflicting change is trying to ensure. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27bridge: multicast: work around clang bugArnd Bergmann1-1/+2
Clang-10 and clang-11 run into a corner case of the register allocator on 32-bit ARM, leading to excessive stack usage from register spilling: net/bridge/br_multicast.c:2422:6: error: stack frame size of 1472 bytes in function 'br_multicast_get_stats' [-Werror,-Wframe-larger-than=] Work around this by marking one of the internal functions as noinline_for_stack. Link: https://bugs.llvm.org/show_bug.cgi?id=45802#c9 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-27bridge: mrp: Rework the MRP netlink interfaceHoratiu Vultur3-43/+233
This patch reworks the MRP netlink interface. Before, each attribute represented a binary structure which made it hard to be extended. Therefore update the MRP netlink interface such that each existing attribute to be a nested attribute which contains the fields of the binary structures. In this way the MRP netlink interface can be extended without breaking the backwards compatibility. It is also using strict checking for attributes under the MRP top attribute. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25bridge: mrp: Fix out-of-bounds read in br_mrp_parseHoratiu Vultur1-0/+6
The issue was reported by syzbot. When the function br_mrp_parse was called with a valid net_bridge_port, the net_bridge was an invalid pointer. Therefore the check br->stp_enabled could pass/fail depending where it was pointing in memory. The fix consists of setting the net_bridge pointer if the port is a valid pointer. Reported-by: syzbot+9c6f0f1f8e32223df9a4@syzkaller.appspotmail.com Fixes: 6536993371fa ("bridge: mrp: Integrate MRP into the bridge") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-25netfilter: nft_reject_bridge: enable reject with bridge vlanMichael Braun1-0/+6
Currently, using the bridge reject target with tagged packets results in untagged packets being sent back. Fix this by mirroring the vlan id as well. Fixes: 85f5b3086a04 ("netfilter: bridge: add reject support") Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-05-22bridge: mrp: Restore port state when deleting MRP instanceHoratiu Vultur1-4/+9
When a MRP instance is deleted, then restore the port according to the bridge state. If the bridge is up then the ports will be in forwarding state otherwise will be in disabled state. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22bridge: mrp: Add br_mrp_unique_ifindex functionHoratiu Vultur1-0/+25
It is not allow to have the same net bridge port part of multiple MRP rings. Therefore add a check if the port is used already in a different MRP. In that case return failure. Fixes: 9a9f26e8f7ea ("bridge: mrp: Connect MRP API with the switchdev API") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-10net: bridge: allow enslaving some DSA master network devicesVladimir Oltean3-13/+48
Commit 8db0a2ee2c63 ("net: bridge: reject DSA-enabled master netdevices as bridge members") added a special check in br_if.c in order to check for a DSA master network device with a tagging protocol configured. This was done because back then, such devices, once enslaved in a bridge would become inoperative and would not pass DSA tagged traffic anymore due to br_handle_frame returning RX_HANDLER_CONSUMED. But right now we have valid use cases which do require bridging of DSA masters. One such example is when the DSA master ports are DSA switch ports themselves (in a disjoint tree setup). This should be completely equivalent, functionally speaking, from having multiple DSA switches hanging off of the ports of a switchdev driver. So we should allow the enslaving of DSA tagged master network devices. Instead of the regular br_handle_frame(), install a new function br_handle_frame_dummy() on these DSA masters, which returns RX_HANDLER_PASS in order to call into the DSA specific tagging protocol handlers, and lift the restriction from br_add_if. Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-07netpoll: accept NULL np argument in netpoll_send_skb()Eric Dumazet1-4/+1
netpoll_send_skb() callers seem to leak skb if the np pointer is NULL. While this should not happen, we can make the code more robust. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07net: remove newlines in NL_SET_ERR_MSG_MODJacob Keller2-2/+2
The NL_SET_ERR_MSG_MOD macro is used to report a string describing an error message to userspace via the netlink extended ACK structure. It should not have a trailing newline. Add a cocci script which catches cases where the newline marker is present. Using this script, fix the handful of cases which accidentally included a trailing new line. I couldn't figure out a way to get a patch mode working, so this script only implements context, report, and org. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: bridge: return false in br_mrp_enabled()Jason Yan1-1/+1
Fix the following coccicheck warning: net/bridge/br_private.h:1334:8-9: WARNING: return of 0/1 in function 'br_mrp_enabled' with return type bool Fixes: 6536993371fab ("bridge: mrp: Integrate MRP into the bridge") Signed-off-by: Jason Yan <yanaijie@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+1
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-05-01 (v2) The following pull-request contains BPF updates for your *net-next* tree. We've added 61 non-merge commits during the last 6 day(s) which contain a total of 153 files changed, 6739 insertions(+), 3367 deletions(-). The main changes are: 1) pulled work.sysctl from vfs tree with sysctl bpf changes. 2) bpf_link observability, from Andrii. 3) BTF-defined map in map, from Andrii. 4) asan fixes for selftests, from Andrii. 5) Allow bpf_map_lookup_elem for SOCKMAP and SOCKHASH, from Jakub. 6) production cloudflare classifier as a selftes, from Lorenz. 7) bpf_ktime_get_*_ns() helper improvements, from Maciej. 8) unprivileged bpftool feature probe, from Quentin. 9) BPF_ENABLE_STATS command, from Song. 10) enable bpf_[gs]etsockopt() helpers for sock_ops progs, from Stanislav. 11) enable a bunch of common helpers for cg-device, sysctl, sockopt progs, from Stanislav. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30net: bridge: vlan: Add a schedule point during VLAN processingIdo Schimmel1-0/+1
User space can request to delete a range of VLANs from a bridge slave in one netlink request. For each deleted VLAN the FDB needs to be traversed in order to flush all the affected entries. If a large range of VLANs is deleted and the number of FDB entries is large or the FDB lock is contented, it is possible for the kernel to loop through the deleted VLANs for a long time. In case preemption is disabled, this can result in a soft lockup. Fix this by adding a schedule point after each VLAN is deleted to yield the CPU, if needed. This is safe because the VLANs are traversed in process context. Fixes: bdced7ef7838 ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-28netfilter: add audit table unregister actionsRichard Guy Briggs1-0/+2
Audit the action of unregistering ebtables and x_tables. See: https://github.com/linux-audit/audit-kernel/issues/44 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-28audit: tidy and extend netfilter_cfg x_tablesRichard Guy Briggs1-8/+4
NETFILTER_CFG record generation was inconsistent for x_tables and ebtables configuration changes. The call was needlessly messy and there were supporting records missing at times while they were produced when not requested. Simplify the logging call into a new audit_log_nfcfg call. Honour the audit_enabled setting while more consistently recording information including supporting records by tidying up dummy checks. Add an op= field that indicates the operation being performed (register or replace). Here is the enhanced sample record: type=NETFILTER_CFG msg=audit(1580905834.919:82970): table=filter family=2 entries=83 op=replace Generate audit NETFILTER_CFG records on ebtables table registration. Previously this was being done for x_tables registration and replacement operations and ebtables table replacement only. See: https://github.com/linux-audit/audit-kernel/issues/25 See: https://github.com/linux-audit/audit-kernel/issues/35 See: https://github.com/linux-audit/audit-kernel/issues/43 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-04-27net: bridge: Add checks for enabling the STP.Horatiu Vultur6-8/+23
It is not possible to have the MRP and STP running at the same time on the bridge, therefore add check when enabling the STP to check if MRP is already enabled. In that case return error. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Integrate MRP into the bridgeHoratiu Vultur5-0/+44
To integrate MRP into the bridge, the bridge needs to do the following: - detect if the MRP frame was received on MRP ring port in that case it would be processed otherwise just forward it as usual. - enable parsing of MRP - before whenever the bridge was set up, it would set all the ports in forwarding state. Add an extra check to not set ports in forwarding state if the port is an MRP ring port. The reason of this change is that if the MRP instance initially sets the port in blocked state by setting the bridge up it would overwrite this setting. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Implement netlink interface to configure MRPHoratiu Vultur1-0/+91
Implement netlink interface to configure MRP. The implementation will do sanity checks over the attributes and then eventually call the MRP interface. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Connect MRP API with the switchdev APIHoratiu Vultur3-1/+589
Implement the MRP API. In case the HW can't generate MRP Test frames then the SW will try to generate the frames. In case that also the SW will fail in generating the frames then a error is return to the userspace. The userspace is responsible to generate all the other MRP frames regardless if the test frames are generated by HW or SW. The forwarding/termination of MRP frames is happening in the kernel and is done by the MRP instance. The userspace application doesn't do the forwarding. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: switchdev: mrp: Implement MRP API for switchdevHoratiu Vultur2-0/+142
Implement the MRP api for switchdev. These functions will just eventually call the switchdev functions: switchdev_port_obj_add/del and switchdev_port_attr_set. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Add MRP interface.Horatiu Vultur1-0/+63
Define the MRP interface. This interface is used by the netlink to update the MRP instances and by the MRP to make the calls to switchdev to offload it to HW. It defines an MRP instance 'struct br_mrp' which is a list of MRP instances. Which will be part of the 'struct net_bridge'. Each instance has 2 ring ports, a bridge and an ID. In case the HW can't generate MRP Test frames then the SW will generate those. br_mrp_add - adds a new MRP instance. br_mrp_del - deletes an existing MRP instance. Each instance has an ID(ring_id). br_mrp_set_port_state - changes the port state. The port can be in forwarding state, which means that the frames can pass through or in blocked state which means that the frames can't pass through except MRP frames. This will eventually call the switchdev API to notify the HW. This information is used also by the SW bridge to know how to forward frames in case the HW doesn't have this capability. br_mrp_set_port_role - a port role can be primary or secondary. This information is required to be pushed to HW in case the HW can generate MRP_Test frames. Because the MRP_Test frames contains a file with this information. Otherwise the HW will not be able to generate the frames correctly. br_mrp_set_ring_state - a ring can be in state open or closed. State open means that the mrp port stopped receiving MRP_Test frames, while closed means that the mrp port received MRP_Test frames. Similar with br_mrp_port_role, this information is pushed in HW because the MRP_Test frames contain this information. br_mrp_set_ring_role - a ring can have the following roles MRM or MRC. For the role MRM it is expected that the HW can terminate the MRP frames, notify the SW that it stopped receiving MRP_Test frames and trapp all the other MRP frames. While for MRC mode it is expected that the HW can forward the MRP frames only between the MRP ports and copy MRP_Topology frames to CPU. In case the HW doesn't support a role it needs to return an error code different than -EOPNOTSUPP. br_mrp_start_test - this starts/stops the generation of MRP_Test frames. To stop the generation of frames the interval needs to have a value of 0. In this case the userspace needs to know if the HW supports this or not. Not to have duplicate frames(generated by HW and SW). Because if the HW supports this then the SW will not generate anymore frames and will expect that the HW will notify when it stopped receiving MRP frames using the function br_mrp_port_open. br_mrp_port_open - this function is used by drivers to notify the userspace via a netlink callback that one of the ports stopped receiving MRP_Test frames. This function is called only when the node has the role MRM. It is not supposed to be called from userspace. br_mrp_port_switchdev_add - this corresponds to the function br_mrp_add, and will notify the HW that a MRP instance is added. The function gets as parameter the MRP instance. br_mrp_port_switchdev_del - this corresponds to the function br_mrp_del, and will notify the HW that a MRP instance is removed. The function gets as parameter the ID of the MRP instance that is removed. br_mrp_port_switchdev_set_state - this corresponds to the function br_mrp_set_port_state. It would notify the HW if it should block or not non-MRP frames. br_mrp_port_switchdev_set_port - this corresponds to the function br_mrp_set_port_role. It would set the port role, primary or secondary. br_mrp_switchdev_set_role - this corresponds to the function br_mrp_set_ring_role and would set one of the role MRM or MRC. br_mrp_switchdev_set_ring_state - this corresponds to the function br_mrp_set_ring_state and would set the ring to be open or closed. br_mrp_switchdev_send_ring_test - this corresponds to the function br_mrp_start_test. This will notify the HW to start or stop generating MRP_Test frames. Value 0 for the interval parameter means to stop generating the frames. br_mrp_port_open - this function is used to notify the userspace that the port lost the continuity of MRP Test frames. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27net: bridge: Add port attribute IFLA_BRPORT_MRP_RING_OPENHoratiu Vultur1-0/+3
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows to notify the userspace when the port lost the continuite of MRP frames. This attribute is set by kernel whenever the SW or HW detects that the ring is being open or closed. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Extend bridge interfaceHoratiu Vultur1-0/+4
To integrate MRP into the bridge, first the bridge needs to be aware of ports that are part of an MRP ring and which rings are on the bridge. Therefore extend bridge interface with the following: - add new flag(BR_MPP_AWARE) to the net bridge ports, this bit will be set when the port is added to an MRP instance. In this way it knows if the frame was received on MRP ring port - add new flag(BR_MRP_LOST_CONT) to the net bridge ports, this bit will be set when the port lost the continuity of MRP Test frames. - add a list of MRP instances Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27bridge: mrp: Update KconfigHoratiu Vultur1-0/+12
Add the option BRIDGE_MRP to allow to build in or not MRP support. The default value is N. Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig1-1/+1
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-03-20net: bridge: vlan options: move the tunnel command to the nested attributeNikolay Aleksandrov1-17/+30
Now that we have a nested tunnel info attribute we can add a separate one for the tunnel command and require it explicitly from user-space. It must be one of RTM_SETLINK/DELLINK. Only RTM_SETLINK requires a valid tunnel id, DELLINK just removes it if it was set before. This allows us to have all tunnel attributes and control in one place, thus removing the need for an outside vlan info flag. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20net: bridge: vlan options: nest the tunnel id into a tunnel info attributeNikolay Aleksandrov2-7/+32
While discussing the new API, Roopa mentioned that we'll be adding more tunnel attributes and options in the future, so it's better to make it a nested attribute, since this is still in net-next we can easily change it and nest the tunnel id attribute under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO. The new format is: [BRIDGE_VLANDB_ENTRY] [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] [BRIDGE_VLANDB_TINFO_ID] Any new tunnel attributes can be nested under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: bridge: vlan: include stats in dumps if requestedNikolay Aleksandrov1-12/+61
This patch adds support for vlan stats to be included when dumping vlan information. We have to dump them only when explicitly requested (thus the flag below) because that disables the vlan range compression and will make the dump significantly larger. In order to request the stats to be included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which can affect dumps with the following first flag: - BRIDGE_VLANDB_DUMPF_STATS The stats are intentionally nested and put into separate attributes to make it easier for extending later since we plan to add per-vlan mcast stats, drop stats and possibly STP stats. This is the last missing piece from the new vlan API which makes the dumped vlan information complete. A dump request which should include stats looks like: [BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS A vlandb entry attribute with stats looks like: [BRIDGE_VLANDB_ENTRY] = { [BRIDGE_VLANDB_ENTRY_STATS] = { [BRIDGE_VLANDB_STATS_RX_BYTES] [BRIDGE_VLANDB_STATS_RX_PACKETS] ... } } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Use nf_flow_offload_tuple() to fetch flow stats, from Paul Blakey. 2) Add new xt_IDLETIMER hard mode, from Manoj Basapathi. Follow up patch to clean up this new mode, from Dan Carpenter. 3) Add support for geneve tunnel options, from Xin Long. 4) Make sets built-in and remove modular infrastructure for sets, from Florian Westphal. 5) Remove unused TEMPLATE_NULLS_VAL, from Li RongQing. 6) Statify nft_pipapo_get, from Chen Wandun. 7) Use C99 flexible-array member, from Gustavo A. R. Silva. 8) More descriptive variable names for bitwise, from Jeremy Sowden. 9) Four patches to add tunnel device hardware offload to the flowtable infrastructure, from wenxu. 10) pipapo set supports for 8-bit grouping, from Stefano Brivio. 11) pipapo can switch between nibble and byte grouping, also from Stefano. 12) Add AVX2 vectorized version of pipapo, from Stefano Brivio. 13) Update pipapo to be use it for single ranges, from Stefano. 14) Add stateful expression support to elements via control plane, eg. counter per element. 15) Re-visit sysctls in unprivileged namespaces, from Florian Westphal. 15) Add new egress hook, from Lukas Wunner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: add support for tunnel mapping set/delNikolay Aleksandrov4-2/+44
This patch adds support for manipulating vlan/tunnel mappings. The tunnel ids are globally unique and are one per-vlan. There were two trickier issues - first in order to support vlan ranges we have to compute the current tunnel id in the following way: - base tunnel id (attr) + current vlan id - starting vlan id This is in line how the old API does vlan/tunnel mapping with ranges. We already have the vlan range present, so it's redundant to add another attribute for the tunnel range end. It's simply base tunnel id + vlan range. And second to support removing mappings we need an out-of-band way to tell the option manipulating function because there are no special/reserved tunnel id values, so we use a vlan flag to denote the operation is tunnel mapping removal. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: add support for tunnel id dumpingNikolay Aleksandrov3-5/+30
Add a new option - BRIDGE_VLANDB_ENTRY_TUNNEL_ID which is used to dump the tunnel id mapping. Since they're unique per vlan they can enter a vlan range if they're consecutive, thus we can calculate the tunnel id range map simply as: vlan range end id - vlan range start id. The starting point is the tunnel id in BRIDGE_VLANDB_ENTRY_TUNNEL_ID. This is similar to how the tunnel entries can be created in a range via the old API (a vlan range maps to a tunnel range). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan tunnel: constify bridge and port argumentsNikolay Aleksandrov3-11/+13
The vlan tunnel code changes vlan options, it shouldn't touch port or bridge options so we can constify the port argument. This would later help us to re-use these functions from the vlan options code. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: rename br_vlan_opts_eq to br_vlan_opts_eq_rangeNikolay Aleksandrov3-7/+7
It is more appropriate name as it shows the intent of why we need to check the options' state. It also allows us to give meaning to the two arguments of the function: the first is the current vlan (v_curr) being checked if it could enter the range ending in the second one (range_end). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15netfilter: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix checkpatch.pl warning WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) in net/bridge/netfilter/ebtables.c This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-24net: bridge: fix stale eth hdr pointer in br_dev_xmitNikolay Aleksandrov1-4/+2
In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19bridge: br_stp: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add per-vlan stateNikolay Aleksandrov5-19/+133
The first per-vlan option added is state, it is needed for EVPN and for per-vlan STP. The state allows to control the forwarding on per-vlan basis. The vlan state is considered only if the port state is forwarding in order to avoid conflicts and be consistent. br_allowed_egress is called only when the state is forwarding, but the ingress case is a bit more complicated due to the fact that we may have the transition between port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still allow the bridge to learn from the packet after vlan filtering and it will be dropped after that. Also to optimize the pvid state check we keep a copy in the vlan group to avoid one lookup. The state members are modified with *_ONCE() to annotate the lockless access. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add basic option setting supportNikolay Aleksandrov3-7/+129
This patch adds support for option modification of single vlans and ranges. It allows to only modify options, i.e. skip create/delete by using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range option changes we try to pack the notifications as much as possible. v2: do full port (all vlans) notification only when creating/deleting vlans for compatibility, rework the range detection when changing options, add more verbose extack errors and check if a vlan should be used (br_vlan_should_use checks) Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add basic option dumping supportNikolay Aleksandrov4-7/+48
We'll be dumping the options for the whole range if they're equal. The first range vlan will be used to extract the options. The commit doesn't change anything yet it just adds the skeleton for the support. The dump will happen when the first option is added. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: check port state before br_allowed_egressNikolay Aleksandrov1-1/+1
If we make sure that br_allowed_egress is called only when we have BR_STATE_FORWARDING state then we can avoid a test later when we add per-vlan state. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>