summaryrefslogtreecommitdiffstats
path: root/net/bridge
AgeCommit message (Collapse)AuthorFilesLines
2020-03-20net: bridge: vlan options: move the tunnel command to the nested attributeNikolay Aleksandrov1-17/+30
Now that we have a nested tunnel info attribute we can add a separate one for the tunnel command and require it explicitly from user-space. It must be one of RTM_SETLINK/DELLINK. Only RTM_SETLINK requires a valid tunnel id, DELLINK just removes it if it was set before. This allows us to have all tunnel attributes and control in one place, thus removing the need for an outside vlan info flag. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-20net: bridge: vlan options: nest the tunnel id into a tunnel info attributeNikolay Aleksandrov2-7/+32
While discussing the new API, Roopa mentioned that we'll be adding more tunnel attributes and options in the future, so it's better to make it a nested attribute, since this is still in net-next we can easily change it and nest the tunnel id attribute under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO. The new format is: [BRIDGE_VLANDB_ENTRY] [BRIDGE_VLANDB_ENTRY_TUNNEL_INFO] [BRIDGE_VLANDB_TINFO_ID] Any new tunnel attributes can be nested under BRIDGE_VLANDB_ENTRY_TUNNEL_INFO. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19net: bridge: vlan: include stats in dumps if requestedNikolay Aleksandrov1-12/+61
This patch adds support for vlan stats to be included when dumping vlan information. We have to dump them only when explicitly requested (thus the flag below) because that disables the vlan range compression and will make the dump significantly larger. In order to request the stats to be included we add a new dump attribute called BRIDGE_VLANDB_DUMP_FLAGS which can affect dumps with the following first flag: - BRIDGE_VLANDB_DUMPF_STATS The stats are intentionally nested and put into separate attributes to make it easier for extending later since we plan to add per-vlan mcast stats, drop stats and possibly STP stats. This is the last missing piece from the new vlan API which makes the dumped vlan information complete. A dump request which should include stats looks like: [BRIDGE_VLANDB_DUMP_FLAGS] |= BRIDGE_VLANDB_DUMPF_STATS A vlandb entry attribute with stats looks like: [BRIDGE_VLANDB_ENTRY] = { [BRIDGE_VLANDB_ENTRY_STATS] = { [BRIDGE_VLANDB_STATS_RX_BYTES] [BRIDGE_VLANDB_STATS_RX_PACKETS] ... } } Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller1-1/+1
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: 1) Use nf_flow_offload_tuple() to fetch flow stats, from Paul Blakey. 2) Add new xt_IDLETIMER hard mode, from Manoj Basapathi. Follow up patch to clean up this new mode, from Dan Carpenter. 3) Add support for geneve tunnel options, from Xin Long. 4) Make sets built-in and remove modular infrastructure for sets, from Florian Westphal. 5) Remove unused TEMPLATE_NULLS_VAL, from Li RongQing. 6) Statify nft_pipapo_get, from Chen Wandun. 7) Use C99 flexible-array member, from Gustavo A. R. Silva. 8) More descriptive variable names for bitwise, from Jeremy Sowden. 9) Four patches to add tunnel device hardware offload to the flowtable infrastructure, from wenxu. 10) pipapo set supports for 8-bit grouping, from Stefano Brivio. 11) pipapo can switch between nibble and byte grouping, also from Stefano. 12) Add AVX2 vectorized version of pipapo, from Stefano Brivio. 13) Update pipapo to be use it for single ranges, from Stefano. 14) Add stateful expression support to elements via control plane, eg. counter per element. 15) Re-visit sysctls in unprivileged namespaces, from Florian Westphal. 15) Add new egress hook, from Lukas Wunner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: add support for tunnel mapping set/delNikolay Aleksandrov4-2/+44
This patch adds support for manipulating vlan/tunnel mappings. The tunnel ids are globally unique and are one per-vlan. There were two trickier issues - first in order to support vlan ranges we have to compute the current tunnel id in the following way: - base tunnel id (attr) + current vlan id - starting vlan id This is in line how the old API does vlan/tunnel mapping with ranges. We already have the vlan range present, so it's redundant to add another attribute for the tunnel range end. It's simply base tunnel id + vlan range. And second to support removing mappings we need an out-of-band way to tell the option manipulating function because there are no special/reserved tunnel id values, so we use a vlan flag to denote the operation is tunnel mapping removal. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: add support for tunnel id dumpingNikolay Aleksandrov3-5/+30
Add a new option - BRIDGE_VLANDB_ENTRY_TUNNEL_ID which is used to dump the tunnel id mapping. Since they're unique per vlan they can enter a vlan range if they're consecutive, thus we can calculate the tunnel id range map simply as: vlan range end id - vlan range start id. The starting point is the tunnel id in BRIDGE_VLANDB_ENTRY_TUNNEL_ID. This is similar to how the tunnel entries can be created in a range via the old API (a vlan range maps to a tunnel range). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan tunnel: constify bridge and port argumentsNikolay Aleksandrov3-11/+13
The vlan tunnel code changes vlan options, it shouldn't touch port or bridge options so we can constify the port argument. This would later help us to re-use these functions from the vlan options code. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-17net: bridge: vlan options: rename br_vlan_opts_eq to br_vlan_opts_eq_rangeNikolay Aleksandrov3-7/+7
It is more appropriate name as it shows the intent of why we need to check the options' state. It also allows us to give meaning to the two arguments of the function: the first is the current vlan (v_curr) being checked if it could enter the range ending in the second one (range_end). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15netfilter: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] Lastly, fix checkpatch.pl warning WARNING: __aligned(size) is preferred over __attribute__((aligned(size))) in net/bridge/netfilter/ebtables.c This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-02-24net: bridge: fix stale eth hdr pointer in br_dev_xmitNikolay Aleksandrov1-4/+2
In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-19bridge: br_stp: Use built-in RCU list checkingMadhuparna Bhowmik1-1/+2
list_for_each_entry_rcu() has built-in RCU and lock checking. Pass cond argument to list_for_each_entry_rcu() to silence false lockdep warning when CONFIG_PROVE_RCU_LIST is enabled by default. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add per-vlan stateNikolay Aleksandrov5-19/+133
The first per-vlan option added is state, it is needed for EVPN and for per-vlan STP. The state allows to control the forwarding on per-vlan basis. The vlan state is considered only if the port state is forwarding in order to avoid conflicts and be consistent. br_allowed_egress is called only when the state is forwarding, but the ingress case is a bit more complicated due to the fact that we may have the transition between port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still allow the bridge to learn from the packet after vlan filtering and it will be dropped after that. Also to optimize the pvid state check we keep a copy in the vlan group to avoid one lookup. The state members are modified with *_ONCE() to annotate the lockless access. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add basic option setting supportNikolay Aleksandrov3-7/+129
This patch adds support for option modification of single vlans and ranges. It allows to only modify options, i.e. skip create/delete by using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range option changes we try to pack the notifications as much as possible. v2: do full port (all vlans) notification only when creating/deleting vlans for compatibility, rework the range detection when changing options, add more verbose extack errors and check if a vlan should be used (br_vlan_should_use checks) Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add basic option dumping supportNikolay Aleksandrov4-7/+48
We'll be dumping the options for the whole range if they're equal. The first range vlan will be used to extract the options. The commit doesn't change anything yet it just adds the skeleton for the support. The dump will happen when the first option is added. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: check port state before br_allowed_egressNikolay Aleksandrov1-1/+1
If we make sure that br_allowed_egress is called only when we have BR_STATE_FORWARDING state then we can avoid a test later when we add per-vlan state. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: notify on vlan add/delete/change flagsNikolay Aleksandrov3-18/+99
Now that we can notify, send a notification on add/del or change of flags. Notifications are also compressed when possible to reduce their number and relieve user-space of extra processing, due to that we have to manually notify after each add/del in order to avoid double notifications. We try hard to notify only about the vlans which actually changed, thus a single command can result in multiple notifications about disjoint ranges if there were vlans which didn't change inside. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add rtnetlink group and notify supportNikolay Aleksandrov2-0/+90
Add a new rtnetlink group for bridge vlan notifications - RTNLGRP_BRVLAN and add support for sending vlan notifications (both single and ranges). No functional changes intended, the notification support will be used by later patches. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add rtm range supportNikolay Aleksandrov1-14/+72
Add a new vlandb nl attribute - BRIDGE_VLANDB_ENTRY_RANGE which causes RTM_NEWVLAN/DELVAN to act on a range. Dumps now automatically compress similar vlans into ranges. This will be also used when per-vlan options are introduced and vlans' options match, they will be put into a single range which is encapsulated in one netlink attribute. We need to run similar checks as br_process_vlan_info() does because these ranges will be used for options setting and they'll be able to skip br_process_vlan_info(). Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add del rtm message supportNikolay Aleksandrov1-0/+6
Adding RTM_DELVLAN support similar to RTM_NEWVLAN is simple, just need to map DELVLAN to DELLINK and register the handler. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add new rtm message supportNikolay Aleksandrov3-6/+123
Add initial RTM_NEWVLAN support which can only create vlans, operating similar to the current br_afspec(). We will use it later to also change per-vlan options. Old-style (flag-based) vlan ranges are not allowed when using RTM messages, we will introduce vlan ranges later via a new nested attribute which would allow us to have all the information about a range encapsulated into a single nl attribute. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add rtm definitions and dump supportNikolay Aleksandrov3-0/+164
This patch adds vlan rtm definitions: - NEWVLAN: to be used for creating vlans, setting options and notifications - DELVLAN: to be used for deleting vlans - GETVLAN: used for dumping vlan information Dumping vlans which can span multiple messages is added now with basic information (vid and flags). We use nlmsg_parse() to validate the header length in order to be able to extend the message with filtering attributes later. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: netlink: add extack error messages when processing vlansNikolay Aleksandrov2-14/+30
Add extack messages on vlan processing errors. We need to move the flags missing check after the "last" check since we may have "last" set but lack a range end flag in the next entry. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-15net: bridge: vlan: add helpers to check for vlan id/range validityNikolay Aleksandrov2-10/+34
Add helpers to check if a vlan id or range are valid. The range helper must be called when range start or end are detected. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-18/+18
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-17/+16
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix endianness issue in flowtable TCP flags dissector, from Arnd Bergmann. 2) Extend flowtable test script with dnat rules, from Florian Westphal. 3) Reject padding in ebtables user entries and validate computed user offset, reported by syzbot, from Florian Westphal. 4) Fix endianness in nft_tproxy, from Phil Sutter. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-24net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu1-1/+2
The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-1/+4
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+3
Pull networking fixes from David Miller: 1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso, including adding a missing ipv6 match description. 2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi Bhat. 3) Fix uninit value in bond_neigh_init(), from Eric Dumazet. 4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold. 5) Fix use after free in tipc_disc_rcv(), from Tuong Lien. 6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul Chaignon. 7) Multicast MAC limit test is off by one in qede, from Manish Chopra. 8) Fix established socket lookup race when socket goes from TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening RCU grace period. From Eric Dumazet. 9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet. 10) Fix active backup transition after link failure in bonding, from Mahesh Bandewar. 11) Avoid zero sized hash table in gtp driver, from Taehee Yoo. 12) Fix wrong interface passed to ->mac_link_up(), from Russell King. 13) Fix DSA egress flooding settings in b53, from Florian Fainelli. 14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost. 15) Fix double free in dpaa2-ptp code, from Ioana Ciornei. 16) Reject invalid MTU values in stmmac, from Jose Abreu. 17) Fix refcount leak in error path of u32 classifier, from Davide Caratti. 18) Fix regression causing iwlwifi firmware crashes on boot, from Anders Kaseorg. 19) Fix inverted return value logic in llc2 code, from Chan Shu Tak. 20) Disable hardware GRO when XDP is attached to qede, frm Manish Chopra. 21) Since we encode state in the low pointer bits, dst metrics must be at least 4 byte aligned, which is not necessarily true on m68k. Add annotations to fix this, from Geert Uytterhoeven. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits) sfc: Include XDP packet headroom in buffer step size. sfc: fix channel allocation with brute force net: dst: Force 4-byte alignment of dst_metrics selftests: pmtu: fix init mtu value in description hv_netvsc: Fix unwanted rx_table reset net: phy: ensure that phy IDs are correctly typed mod_devicetable: fix PHY module format qede: Disable hardware gro when xdp prog is installed net: ena: fix issues in setting interrupt moderation params in ethtool net: ena: fix default tx interrupt moderation interval net/smc: unregister ib devices in reboot_event net: stmmac: platform: Fix MDIO init for platforms without PHY llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) net: hisilicon: Fix a BUG trigered by wrong bytes_compl net: dsa: ksz: use common define for tag len s390/qeth: don't return -ENOTSUPP to userspace s390/qeth: fix promiscuous mode after reset s390/qeth: handle error due to unsupported transport mode cxgb4: fix refcount init for TC-MQPRIO offload tc-testing: initial tdc selftests for cls_u32 ...
2019-12-20netfilter: ebtables: compat: reject all padding in matches/watchersFlorian Westphal1-17/+16
syzbot reported following splat: BUG: KASAN: vmalloc-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline] BUG: KASAN: vmalloc-out-of-bounds in compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155 Read of size 4 at addr ffffc900004461f4 by task syz-executor267/7937 CPU: 1 PID: 7937 Comm: syz-executor267 Not tainted 5.5.0-rc1-syzkaller #0 size_entry_mwt net/bridge/netfilter/ebtables.c:2063 [inline] compat_copy_entries+0x128b/0x1380 net/bridge/netfilter/ebtables.c:2155 compat_do_replace+0x344/0x720 net/bridge/netfilter/ebtables.c:2249 compat_do_ebt_set_ctl+0x22f/0x27e net/bridge/netfilter/ebtables.c:2333 [..] Because padding isn't considered during computation of ->buf_user_offset, "total" is decremented by fewer bytes than it should. Therefore, the first part of if (*total < sizeof(*entry) || entry->next_offset < sizeof(*entry)) will pass, -- it should not have. This causes oob access: entry->next_offset is past the vmalloced size. Reject padding and check that computed user offset (sum of ebt_entry structure plus all individual matches/watchers/targets) is same value that userspace gave us as the offset of the next entry. Reported-by: syzbot+f68108fed972453a0ad4@syzkaller.appspotmail.com Fixes: 81e675c227ec ("netfilter: ebtables: add CONFIG_COMPAT support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-14net: bridge: add STP xstatsVivien Didelot4-0/+34
This adds rx_bpdu, tx_bpdu, rx_tcn, tx_tcn, transition_blk, transition_fwd xstats counters to the bridge ports copied over via netlink, providing useful information for STP. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller1-0/+3
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Wait for rcu grace period after releasing netns in ctnetlink, from Florian Westphal. 2) Incorrect command type in flowtable offload ndo invocation, from wenxu. 3) Incorrect callback type in flowtable offload flow tuple updates, also from wenxu. 4) Fix compile warning on flowtable offload infrastructure due to possible reference to uninitialized variable, from Nathan Chancellor. 5) Do not inline nf_ct_resolve_clash(), this is called from slow path / stress situations. From Florian Westphal. 6) Missing IPv6 flow selector description in flowtable offload. 7) Missing check for NETDEV_UNREGISTER in nf_tables offload infrastructure, from wenxu. 8) Update NAT selftest to use randomized netns names, from Florian Westphal. 9) Restore nfqueue bridge support, from Marco Oliverio. 10) Compilation warning in SCTP_CHUNKMAP_*() on xt_sctp header. From Phil Sutter. 11) Fix bogus lookup/get match for non-anonymous rbtree sets. 12) Missing netlink validation for NFT_SET_ELEM_INTERVAL_END elements. 13) Missing netlink validation for NFT_DATA_VALUE after nft_data_init(). 14) If rule specifies no actions, offload infrastructure returns EOPNOTSUPP. 15) Module refcount leak in object updates. 16) Missing sanitization for ARP traffic from br_netfilter, from Eric Dumazet. 17) Compilation breakage on big-endian due to incorrect memcpy() size in the flowtable offload infrastructure. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya1-1/+1
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09netfilter: bridge: make sure to pull arp header in br_nf_forward_arp()Eric Dumazet1-0/+3
syzbot is kind enough to remind us we need to call skb_may_pull() BUG: KMSAN: uninit-value in br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 CPU: 1 PID: 11631 Comm: syz-executor.1 Not tainted 5.4.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x64/0xc0 mm/kmsan/kmsan_instr.c:245 br_nf_forward_arp+0xe61/0x1230 net/bridge/br_netfilter_hooks.c:665 nf_hook_entry_hookfn include/linux/netfilter.h:135 [inline] nf_hook_slow+0x18b/0x3f0 net/netfilter/core.c:512 nf_hook include/linux/netfilter.h:260 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] __br_forward+0x78f/0xe30 net/bridge/br_forward.c:109 br_flood+0xef0/0xfe0 net/bridge/br_forward.c:234 br_handle_frame_finish+0x1a77/0x1c20 net/bridge/br_input.c:162 nf_hook_bridge_pre net/bridge/br_input.c:245 [inline] br_handle_frame+0xfb6/0x1eb0 net/bridge/br_input.c:348 __netif_receive_skb_core+0x20b9/0x51a0 net/core/dev.c:4830 __netif_receive_skb_one_core net/core/dev.c:4927 [inline] __netif_receive_skb net/core/dev.c:5043 [inline] process_backlog+0x610/0x13c0 net/core/dev.c:5874 napi_poll net/core/dev.c:6311 [inline] net_rx_action+0x7a6/0x1aa0 net/core/dev.c:6379 __do_softirq+0x4a1/0x83a kernel/softirq.c:293 do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1091 </IRQ> do_softirq kernel/softirq.c:338 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:190 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:688 [inline] __dev_queue_xmit+0x38e8/0x4200 net/core/dev.c:3819 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3825 packet_snd net/packet/af_packet.c:2959 [inline] packet_sendmsg+0x8234/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a679 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f0a3c9e5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 000000000045a679 RDX: 000000000000000e RSI: 0000000020000200 RDI: 0000000000000003 RBP: 000000000075bf20 R08: 00000000200000c0 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f0a3c9e66d4 R13: 00000000004c8ec1 R14: 00000000004dfe28 R15: 00000000ffffffff Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x97/0x100 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2773 [inline] __kmalloc_node_track_caller+0xe27/0x11a0 mm/slub.c:4381 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x306/0xa10 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] alloc_skb_with_frags+0x18c/0xa80 net/core/skbuff.c:5662 sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2244 packet_alloc_skb net/packet/af_packet.c:2807 [inline] packet_snd net/packet/af_packet.c:2902 [inline] packet_sendmsg+0x63a6/0x9100 net/packet/af_packet.c:2984 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] __sys_sendto+0xc44/0xc70 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1960 __x64_sys_sendto+0x6e/0x90 net/socket.c:1960 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-12-03net: bridge: deny dev_set_mac_address() when unregisteringNikolay Aleksandrov1-0/+6
We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12bridge: implement get_link_ksettings ethtool methodMatthias Schiffer1-2/+34
We return the maximum speed of all active ports. This matches how the link speed would give an upper limit for traffic to/from any single peer if the bridge were replaced with a hardware switch. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-4/+15
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04bridge: ebtables: don't crash when using dnat target in output chainsFlorian Westphal1-4/+15
xt_in() returns NULL in the output hook, skip the pkt_type change for that case, redirection only makes sense in broute/prerouting hooks. Reported-by: Tom Yan <tom.ty89@gmail.com> Cc: Linus Lüssing <linus.luessing@c0d3.blue> Fixes: cf3cb246e277d ("bridge: ebtables: fix reception of frames DNAT-ed to bridge device/port") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-11-04net: bridge: fdb: eliminate extra port state tests from fast-pathNikolay Aleksandrov3-5/+9
When commit df1c0b8468b3 ("[BRIDGE]: Packets leaking out of disabled/blocked ports.") introduced the port state tests in br_fdb_update() it was to avoid learning/refreshing from STP BPDUs, it was also used to avoid learning/refreshing from user-space with NTF_USE. Those two tests are done for every packet entering the bridge if it's learning, but for the fast-path we already have them checked in br_handle_frame() and is unnecessary to do it again. Thus push the checks to the unlikely cases and drop them from br_fdb_update(), the new nbp_state_should_learn() helper is used to determine if the port state allows br_fdb_update() to be called. The two places which need to do it manually are: - user-space add call with NTF_USE set - link-local packet learning done in __br_handle_local_finish() Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-9/+1
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01net: bridge: fdb: restore unlikely() when taking over externally added entriesNikolay Aleksandrov1-2/+4
Taking over hw-learned entries is not a likely scenario so restore the unlikely() use for the case of SW taking over externally learned entries. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01net: bridge: fdb: avoid two atomic bitops in br_fdb_external_learn_add()Nikolay Aleksandrov1-4/+5
If we setup the fdb flags prior to calling fdb_create() we can avoid two atomic bitops when learning a new entry. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01net: bridge: fdb: br_fdb_update can take flags directlyNikolay Aleksandrov3-12/+9
If we modify br_fdb_update() to take flags directly we can get rid of one test and one atomic bitop in the learning path. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: set flags directly in fdb_createNikolay Aleksandrov1-11/+7
No need to have separate arguments for each flag, just set the flags to whatever was passed to fdb_create() before the fdb is published. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: convert offloaded to use bitopsNikolay Aleksandrov3-8/+9
Convert the offloaded field to a flag and use bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: convert added_by_external_learn to use bitopsNikolay Aleksandrov2-12/+11
Convert the added_by_external_learn field to a flag and use bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: convert added_by_user to bitopsNikolay Aleksandrov3-17/+18
Straight-forward convert of the added_by_user field to bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: convert is_sticky to bitopsNikolay Aleksandrov2-8/+8
Straight-forward convert of the is_sticky field to bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: convert is_static to bitopsNikolay Aleksandrov2-23/+21
Convert the is_static to bitops, make use of the combined test_and_set/clear_bit to simplify expressions in fdb_add_entry. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29net: bridge: fdb: convert is_local to bitopsNikolay Aleksandrov3-16/+27
The patch adds a new fdb flags field in the hole between the two cache lines and uses it to convert is_local to bitops. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-24net: core: add generic lockdep keysTaehee Yoo1-8/+0
Some interface types could be nested. (VLAN, BONDING, TEAM, MACSEC, MACVLAN, IPVLAN, VIRT_WIFI, VXLAN, etc..) These interface types should set lockdep class because, without lockdep class key, lockdep always warn about unexisting circular locking. In the current code, these interfaces have their own lockdep class keys and these manage itself. So that there are so many duplicate code around the /driver/net and /net/. This patch adds new generic lockdep keys and some helper functions for it. This patch does below changes. a) Add lockdep class keys in struct net_device - qdisc_running, xmit, addr_list, qdisc_busylock - these keys are used as dynamic lockdep key. b) When net_device is being allocated, lockdep keys are registered. - alloc_netdev_mqs() c) When net_device is being free'd llockdep keys are unregistered. - free_netdev() d) Add generic lockdep key helper function - netdev_register_lockdep_key() - netdev_unregister_lockdep_key() - netdev_update_lockdep_key() e) Remove unnecessary generic lockdep macro and functions f) Remove unnecessary lockdep code of each interfaces. After this patch, each interface modules don't need to maintain their lockdep keys. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 07:03:18 +0000