summaryrefslogtreecommitdiffstats
path: root/net/bridge
AgeCommit message (Collapse)AuthorFilesLines
2015-10-12bridge: push bridge setting ageing_time down to switchdevScott Feldman5-7/+29
Use SWITCHDEV_F_SKIP_EOPNOTSUPP to skip over ports in bridge that don't support setting ageing_time (or setting bridge attrs in general). If push fails, don't update ageing_time in bridge and return err to user. If push succeeds, update ageing_time in bridge and run gc_timer now to recalabrate when to run gc_timer next, based on new ageing_time. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-12bridge: allow adding of fdb entries pointing to the bridge deviceRoopa Prabhu2-30/+93
This patch enables adding of fdb entries pointing to the bridge device. This can be used to propagate mac address of vlan interfaces configured on top of the vlan filtering bridge. Before: $bridge fdb add 44:38:39:00:27:9f dev bridge RTNETLINK answers: Invalid argument After: $bridge fdb add 44:38:39:00:27:9f dev bridge Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: add support for port's multicast_router attributeNikolay Aleksandrov1-0/+19
Add IFLA_BRPORT_MULTICAST_ROUTER to allow setting/getting port's multicast_router via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: allow to flush port's fdbNikolay Aleksandrov1-0/+3
Add IFLA_BRPORT_FLUSH to allow flushing port's fdb similar to sysfs's flush. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's timer valuesNikolay Aleksandrov1-0/+14
Add the following attributes in order to export port's timer values: IFLA_BRPORT_MESSAGE_AGE_TIMER, IFLA_BRPORT_FORWARD_DELAY_TIMER and IFLA_BRPORT_HOLD_TIMER. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's topology_change_ack and config_pendingNikolay Aleksandrov1-1/+6
Add IFLA_BRPORT_TOPOLOGY_CHANGE_ACK and IFLA_BRPORT_CONFIG_PENDING to allow getting port's topology_change_ack and config_pending respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's id and numberNikolay Aleksandrov1-1/+5
Add IFLA_BRPORT_(ID|NO) to allow getting port's port_id and port_no respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's designated cost and portNikolay Aleksandrov1-1/+5
Add IFLA_BRPORT_DESIGNATED_(COST|PORT) to allow getting the port's designated cost and port respectively via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's bridge idNikolay Aleksandrov1-1/+4
Add IFLA_BRPORT_BRIDGE_ID to allow getting the designated bridge id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: export port's root idNikolay Aleksandrov1-1/+4
Add IFLA_BRPORT_ROOT_ID to allow getting the designated root id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-07bridge: netlink: make br_fill_info's frame size smallerNikolay Aleksandrov1-23/+19
When KASAN is enabled the frame size grows > 2048 bytes and we get a warning, so make it smaller. net/bridge/br_netlink.c: In function 'br_fill_info': >> net/bridge/br_netlink.c:1110:1: warning: the frame size of 2160 bytes >> is larger than 2048 bytes [-Wframe-larger-than=] Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-05Merge branch 'master' of ↵David S. Miller1-9/+4
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/net-next Eric W. Biederman says: ==================== net: Pass net through ip fragmention This is the next installment of my work to pass struct net through the output path so the code does not need to guess how to figure out which network namespace it is in, and ultimately routes can have output devices in another network namespace. This round focuses on passing net through ip fragmentation which we seem to call from about everywhere. That is the main ip output paths, the bridge netfilter code, and openvswitch. This has to happend at once accross the tree as function pointers are involved. First some prep work is done, then ipv4 and ipv6 are converted and then temporary helper functions are removed. ==================== Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for default_pvidNikolay Aleksandrov3-8/+20
Add IFLA_BR_VLAN_DEFAULT_PVID to allow setting/getting bridge's default_pvid via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for netfilter tables configNikolay Aleksandrov1-1/+36
Add support to allow getting/setting netfilter tables settings. Currently these are IFLA_BR_NF_CALL_IPTABLES, IFLA_BR_NF_CALL_IP6TABLES and IFLA_BR_NF_CALL_ARPTABLES. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for igmp's intervalsNikolay Aleksandrov1-1/+69
Add support to set/get all of the igmp's configurable intervals via netlink. These currently are: IFLA_BR_MCAST_LAST_MEMBER_INTVL IFLA_BR_MCAST_MEMBERSHIP_INTVL IFLA_BR_MCAST_QUERIER_INTVL IFLA_BR_MCAST_QUERY_INTVL IFLA_BR_MCAST_QUERY_RESPONSE_INTVL IFLA_BR_MCAST_STARTUP_QUERY_INTVL Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_startup_query_countNikolay Aleksandrov1-6/+16
Add IFLA_BR_MCAST_STARTUP_QUERY_CNT to allow setting/getting br->multicast_startup_query_count via netlink. Also align the ifla comments. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_last_member_countNikolay Aleksandrov1-1/+11
Add IFLA_BR_MCAST_LAST_MEMBER_CNT to allow setting/getting br->multicast_last_member_count via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for igmp's hash_maxNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_HASH_MAX to allow setting/getting br->hash_max via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for igmp's hash_elasticityNikolay Aleksandrov1-1/+11
Add IFLA_BR_MCAST_HASH_ELASTICITY to allow setting/getting br->hash_elasticity via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_querierNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_QUERIER to allow setting/getting br->multicast_querier via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_query_use_ifaddrNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_QUERY_USE_IFADDR to allow setting/getting br->multicast_query_use_ifaddr via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_snoopingNikolay Aleksandrov1-1/+12
Add IFLA_BR_MCAST_SNOOPING to allow enabling/disabling multicast snooping via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add support for multicast_routerNikolay Aleksandrov1-0/+19
Add IFLA_BR_MCAST_ROUTER to allow setting and retrieving br->multicast_router when igmp snooping is enabled. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add fdb flushNikolay Aleksandrov1-0/+3
Simple attribute that flushes the bridge's fdb. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add group_addr supportNikolay Aleksandrov1-1/+24
Add IFLA_BR_GROUP_ADDR attribute to allow setting and retrieving the group_addr via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export all timersNikolay Aleksandrov1-1/+15
Export the following bridge timers (also exported via sysfs): IFLA_BR_HELLO_TIMER, IFLA_BR_TCN_TIMER, IFLA_BR_TOPOLOGY_CHANGE_TIMER, IFLA_BR_GC_TIMER via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export topology_change and topology_change_detectedNikolay Aleksandrov1-1/+6
Add IFLA_BR_TOPOLOGY_CHANGE and IFLA_BR_TOPOLOGY_CHANGE_DETECTED and export them via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export root path costNikolay Aleksandrov1-1/+3
Add IFLA_BR_ROOT_PATH_COST and export it via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export root portNikolay Aleksandrov1-1/+3
Add IFLA_BR_ROOT_PORT and export it via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export bridge idNikolay Aleksandrov1-2/+7
Add IFLA_BR_BRIDGE_ID and export br->bridge_id via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: export root idNikolay Aleksandrov1-1/+8
Add IFLA_BR_ROOT_ID and export br->designated_root via netlink. For this purpose add struct ifla_bridge_id that would represent struct bridge_id. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: netlink: add group_fwd_mask supportNikolay Aleksandrov1-1/+13
Add IFLA_BR_GROUP_FWD_MASK attribute to allow setting and retrieving the group_fwd_mask via netlink. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: vlan: use br_vlan_should_use to simplify __vlan_add/delNikolay Aleksandrov2-23/+15
The checks that lead to num_vlans change are always what br_vlan_should_use checks for, namely if the vlan is only a context or not and depending on that it's either not counted or counted as a real/used vlan respectively. Also give better explanation in br_vlan_should_use's comment. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: vlan: drop master_flags from __vlan_addNikolay Aleksandrov1-4/+2
There's only one user now and we can include the flag directly. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: vlan: use br_vlan_(get|put)_master to deal with refcountsNikolay Aleksandrov1-17/+39
Introduce br_vlan_(get|put)_master which take a reference (or create the master vlan first if it didn't exist) and drop a reference respectively. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04bridge: vlan: use rcu list for the ordered vlan listNikolay Aleksandrov2-4/+10
When I did the conversion to rhashtable I missed the required locking of one important user of the vlan list - br_get_link_af_size_filtered() which is called: br_ifinfo_notify() -> br_nlmsg_size() -> br_get_link_af_size_filtered() and the notifications can be sent without holding rtnl. Before this conversion the function relied on using rcu and since we already use rcu to destroy the vlans, we can simply migrate the list to use the rcu helpers. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: push object ID back to object structureJiri Pirko2-6/+6
Suggested-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: bring back switchdev_obj and use it as a generic object paramJiri Pirko2-3/+4
Replace "void *obj" with a generic structure. Introduce couple of helpers along that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_fdb to switchdev_obj_port_fdbJiri Pirko1-1/+1
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename switchdev_obj_vlan to switchdev_obj_port_vlanJiri Pirko1-2/+2
Make the struct name in sync with object id name. Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_ATTR_* enum values to SWITCHDEV_ATTR_ID_*Jiri Pirko1-1/+1
To be aligned with obj. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03switchdev: rename SWITCHDEV_OBJ_* enum values to SWITCHDEV_OBJ_ID_*Jiri Pirko2-3/+5
Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01bridge: vlan: don't pass flags when creating context onlyNikolay Aleksandrov1-1/+1
We should not pass the original flags when creating a context vlan only because they may contain some flags that change behaviour in the bridge. The new global context should be with minimal set of flags, so pass 0 and let br_vlan_add() set the master flag only. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01bridge: vlan: fix possible null ptr derefs on port init and deinitNikolay Aleksandrov2-7/+12
When a new port is being added we need to make vlgrp available after rhashtable has been initialized and when removing a port we need to flush the vlans and free the resources after we're sure noone can use the port, i.e. after it's removed from the port list and synchronize_rcu is executed. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01bridge: vlan: move pvid inside net_bridge_vlan_groupNikolay Aleksandrov5-118/+75
One obvious way to converge more code (which was also used by the previous vlan code) is to move pvid inside net_bridge_vlan_group. This allows us to simplify some and remove other port-specific functions. Also gives us the ability to simply pass the vlan group and use all of the contained information. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01bridge: vlan: fix possible null vlgrp deref while registering new portNikolay Aleksandrov1-1/+3
While a new port is being initialized the rx_handler gets set, but the vlans get initialized later in br_add_if() and in that window if we receive a frame with a link-local address we can try to dereference p->vlgrp in: br_handle_frame() -> br_handle_local_finish() -> br_should_learn() Fix this by checking vlgrp before using it. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-01bridge: vlan: adjust rhashtable initial size and hash locks sizeNikolay Aleksandrov1-0/+2
As Stephen pointed out the default initial size is more than we need, so let's start small (4 elements, thus nelem_hint = 3). Also limit the hash locks to the number of CPUs as we don't need any write-side scaling and this looks like the minimum. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-30bridge: Remove br_nf_push_frag_xmit_skEric W. Biederman1-5/+0
Now that this compatability function no longer has any callers remove it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-09-30ipv6: Pass struct net through ip6_fragmentEric W. Biederman1-1/+1
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2015-09-30ipv4: Pass struct net through ip_fragmentEric W. Biederman1-3/+3
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-25 15:17:23 +0000