summaryrefslogtreecommitdiffstats
path: root/net/bridge
AgeCommit message (Collapse)AuthorFilesLines
2018-04-29bridge: check iface upper dev when setting master via ioctlHangbin Liu1-2/+2
When we set a bond slave's master to bridge via ioctl, we only check the IFF_BRIDGE_PORT flag. Although we will find the slave's real master at netdev_master_upper_dev_link() later, it already does some settings and allocates some resources. It would be better to return as early as possible. v1 -> v2: use netdev_master_upper_dev_get() instead of netdev_has_any_upper_dev() to check if we have a master, because not all upper devs are masters, e.g. vlan device. Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-09netfilter: ebtables: don't attempt to allocate 0-sized compat arrayFlorian Westphal1-5/+6
Dmitry reports 32bit ebtables on 64bit kernel got broken by a recent change that returns -EINVAL when ruleset has no entries. ebtables however only counts user-defined chains, so for the initial table nentries will be 0. Don't try to allocate the compat array in this case, as no user defined rules exist no rule will need 64bit translation. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 7d7d7e02111e9 ("netfilter: compat: reject huge allocation requests") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-31net: bridge: disable bridge MTU auto tuning if it was set manuallyNikolay Aleksandrov4-20/+26
As Roopa noted today the biggest source of problems when configuring bridge and ports is that the bridge MTU keeps changing automatically on port events (add/del/changemtu). That leads to inconsistent behaviour and network config software needs to chase the MTU and fix it on each such event. Let's improve on that situation and allow for the user to set any MTU within ETH_MIN/MAX limits, but once manually configured it is the user's responsibility to keep it correct afterwards. In case the MTU isn't manually set - the behaviour reverts to the previous and the bridge follows the minimum MTU. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-31net: bridge: set min MTU on port events and allow user to set maxNikolay Aleksandrov4-32/+18
Recently the bridge was changed to automatically set maximum MTU on port events (add/del/changemtu) when vlan filtering is enabled, but that actually changes behaviour in a way which breaks some setups and can lead to packet drops. In order to still allow that maximum to be set while being compatible, we add the ability for the user to tune the bridge MTU up to the maximum when vlan filtering is enabled, but that has to be done explicitly and all port events (add/del/changemtu) lead to resetting that MTU to the minimum as before. Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller6-126/+94
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree. This batch comes with more input sanitization for xtables to address bug reports from fuzzers, preparation works to the flowtable infrastructure and assorted updates. In no particular order, they are: 1) Make sure userspace provides a valid standard target verdict, from Florian Westphal. 2) Sanitize error target size, also from Florian. 3) Validate that last rule in basechain matches underflow/policy since userspace assumes this when decoding the ruleset blob that comes from the kernel, from Florian. 4) Consolidate hook entry checks through xt_check_table_hooks(), patch from Florian. 5) Cap ruleset allocations at 512 mbytes, 134217728 rules and reject very large compat offset arrays, so we have a reasonable upper limit and fuzzers don't exercise the oom-killer. Patches from Florian. 6) Several WARN_ON checks on xtables mutex helper, from Florian. 7) xt_rateest now has a hashtable per net, from Cong Wang. 8) Consolidate counter allocation in xt_counters_alloc(), from Florian. 9) Earlier xt_table_unlock() call in {ip,ip6,arp,eb}tables, patch from Xin Long. 10) Set FLOW_OFFLOAD_DIR_* to IP_CT_DIR_* definitions, patch from Felix Fietkau. 11) Consolidate code through flow_offload_fill_dir(), also from Felix. 12) Inline ip6_dst_mtu_forward() just like ip_dst_mtu_maybe_forward() to remove a dependency with flowtable and ipv6.ko, from Felix. 13) Cache mtu size in flow_offload_tuple object, this is safe for forwarding as f87c10a8aa1e describes, from Felix. 14) Rename nf_flow_table.c to nf_flow_table_core.o, to simplify too modular infrastructure, from Felix. 15) Add rt0, rt2 and rt4 IPv6 routing extension support, patch from Ahmed Abdelsalam. 16) Remove unused parameter in nf_conncount_count(), from Yi-Hung Wei. 17) Support for counting only to nf_conncount infrastructure, patch from Yi-Hung Wei. 18) Add strict NFT_CT_{SRC_IP,DST_IP,SRC_IP6,DST_IP6} key datatypes to nft_ct. 19) Use boolean as return value from ipt_ah and from IPVS too, patch from Gustavo A. R. Silva. 20) Remove useless parameters in nfnl_acct_overquota() and nf_conntrack_broadcast_help(), from Taehee Yoo. 21) Use ipv6_addr_is_multicast() from xt_cluster, also from Taehee Yoo. 22) Statify nf_tables_obj_lookup_byhandle, patch from Fengguang Wu. 23) Fix typo in xt_limit, from Geert Uytterhoeven. 24) Do no use VLAs in Netfilter code, again from Gustavo. 25) Use ADD_COUNTER from ebtables, from Taehee Yoo. 26) Bitshift support for CONNMARK and MARK targets, from Jack Ma. 27) Use pr_*() and add pr_fmt(), from Arushi Singhal. 28) Add synproxy support to ctnetlink. 29) ICMP type and IGMP matching support for ebtables, patches from Matthias Schiffer. 30) Support for the revision infrastructure to ebtables, from Bernie Harris. 31) String match support for ebtables, also from Bernie. 32) Documentation for the new flowtable infrastructure. 33) Use generic comparison functions in ebt_stp, from Joe Perches. 34) Demodularize filter chains in nftables. 35) Register conntrack hooks in case nftables NAT chain is added. 36) Merge assignments with return in a couple of spots in the Netfilter codebase, also from Arushi. 37) Document that xtables percpu counters are stored in the same memory area, from Ben Hutchings. 38) Revert mark_source_chains() sanity checks that break existing rulesets, from Florian Westphal. 39) Use is_zero_ether_addr() in the ipset codebase, from Joe Perches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30netfilter: nf_tables: build-in filter chain typePablo Neira Ayuso3-83/+1
One module per supported filter chain family type takes too much memory for very little code - too much modularization - place all chain filter definitions in one single file. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: nft_register_chain_type() returns voidPablo Neira Ayuso1-1/+3
Use WARN_ON() instead since it should not happen that neither family goes over NFPROTO_NUMPROTO nor there is already a chain of this type already registered. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: nf_tables: rename struct nf_chain_typePablo Neira Ayuso1-1/+1
Use nft_ prefix. By when I added chain types, I forgot to use the nftables prefix. Rename enum nft_chain_type to enum nft_chain_types too, otherwise there is an overlap. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebt_stp: Use generic functions for comparisonsJoe Perches1-4/+2
Instead of unnecessary const declarations, use the generic functions to save a little object space. $ size net/bridge/netfilter/ebt_stp.o* text data bss dec hex filename 1250 144 0 1394 572 net/bridge/netfilter/ebt_stp.o.new 1344 144 0 1488 5d0 net/bridge/netfilter/ebt_stp.o.old Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30netfilter: ebtables: Add support for specifying match revisionBernie Harris1-18/+29
Currently ebtables assumes that the revision number of all match modules is 0, which is an issue when trying to use existing xtables matches with ebtables. The solution is to modify ebtables to allow extensions to specify a revision number, similar to iptables. This gets passed down to the kernel, which is then able to find the match module correctly. To main binary backwards compatibility, the size of the ebt_entry structures is not changed, only the size of the name field is decreased by 1 byte to make room for the revision field. Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai6-6/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Use octal not symbolic permissionsJoe Perches2-19/+19
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23net: bridge: fix direct access to bridge vlan_enabled and use helperNikolay Aleksandrov1-1/+1
We need to use br_vlan_enabled() helper otherwise we'll break builds without bridge vlans: net/bridge//br_if.c: In function ‘br_mtu’: net/bridge//br_if.c:458:8: error: ‘const struct net_bridge’ has no member named ‘vlan_enabled’ if (br->vlan_enabled) ^ net/bridge//br_if.c:462:1: warning: control reaches end of non-void function [-Wreturn-type] } ^ scripts/Makefile.build:324: recipe for target 'net/bridge//br_if.o' failed Fixes: 419d14af9e07 ("bridge: Allow max MTU when multiple VLANs present") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23bridge: Allow max MTU when multiple VLANs presentChas Williams4-7/+25
If the bridge is allowing multiple VLANs, some VLANs may have different MTUs. Instead of choosing the minimum MTU for the bridge interface, choose the maximum MTU of the bridge members. With this the user only needs to set a larger MTU on the member ports that are participating in the large MTU VLANS. Signed-off-by: Chas Williams <3chas3@gmail.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+39
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20netfilter: ebtables: add support for matching IGMP typeMatthias Schiffer1-2/+17
We already have ICMPv6 type/code matches (which can be used to distinguish different types of MLD packets). Add support for IPv4 IGMP matches in the same way. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20netfilter: ebtables: add support for matching ICMP type and codeMatthias Schiffer1-10/+33
We already have ICMPv6 type/code matches. This adds support for IPv4 ICMP matches in the same way. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-20netfilter: ebtables: use ADD_COUNTER macroTaehee Yoo1-11/+6
xtables uses ADD_COUNTER macro to increase packet and byte count. ebtables also can use this. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-11netfilter: bridge: ebt_among: add more missing match size checksFlorian Westphal1-0/+34
ebt_among is special, it has a dynamic match size and is exempt from the central size checks. commit c4585a2823edf ("bridge: ebt_among: add missing match size checks") added validation for pool size, but missed fact that the macros ebt_among_wh_src/dst can already return out-of-bound result because they do not check value of wh_src/dst_ofs (an offset) vs. the size of the match that userspace gave to us. v2: check that offset has correct alignment. Paolo Abeni points out that we should also check that src/dst wormhash arrays do not overlap, and src + length lines up with start of dst (or vice versa). v3: compact wormhash_sizes_valid() part NB: Fixes tag is intentionally wrong, this bug exists from day one when match was added for 2.6 kernel. Tag is there so stable maintainers will notice this one too. Tested with same rules from the earlier patch. Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks") Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-11netfilter: ebtables: fix erroneous reject of last ruleFlorian Westphal1-1/+5
The last rule in the blob has next_entry offset that is same as total size. This made "ebtables32 -A OUTPUT -d de:ad:be:ef:01:02" fail on 64 bit kernel. Fixes: b71812168571fa ("netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-13/+54
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05netfilter: compat: prepare xt_compat_init_offsets to return errorsFlorian Westphal1-2/+8
should have no impact, function still always returns 0. This patch is only to ease review. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-05net: Convert log pernet_operationsKirill Tkhai1-0/+1
These pernet_operations use nf_log_set() and nf_log_unset() in their methods: nf_log_bridge_net_ops nf_log_arp_net_ops nf_log_ipv4_net_ops nf_log_ipv6_net_ops nf_log_netdev_net_ops Nobody can send such a packet to a net before it's became registered, nobody can send a packet after all netdevices are unregistered. So, these pernet_operations are able to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05net: Convert broute_net_ops, frame_filter_net_ops and frame_nat_net_opsKirill Tkhai3-0/+3
These pernet_operations use ebt_register_table() and ebt_unregister_table() to act on the tables, which are used as argument in ebt_do_table(), called from ebtables hooks. Since there are no net-related bridge packets in-flight, when the init and exit methods are called, these pernet_operations are safe to be executed in parallel with any other. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller3-13/+52
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Put back reference on CLUSTERIP configuration structure from the error path, patch from Florian Westphal. 2) Put reference on CLUSTERIP configuration instead of freeing it, another cpu may still be walking over it, also from Florian. 3) Refetch pointer to IPv6 header from nf_nat_ipv6_manip_pkt() given packet manipulation may reallocation the skbuff header, from Florian. 4) Missing match size sanity checks in ebt_among, from Florian. 5) Convert BUG_ON to WARN_ON in ebtables, from Florian. 6) Sanity check userspace offsets from ebtables kernel, from Florian. 7) Missing checksum replace call in flowtable IPv4 DNAT, from Felix Fietkau. 8) Bump the right stats on checksum error from bridge netfilter, from Taehee Yoo. 9) Unset interface flag in IPv6 fib lookups otherwise we get misleading routing lookup results, from Florian. 10) Missing sk_to_full_sk() in ip6_route_me_harder() from Eric Dumazet. 11) Don't allow devices to be part of multiple flowtables at the same time, this may break setups. 12) Missing netlink attribute validation in flowtable deletion. 13) Wrong array index in nf_unregister_net_hook() call from error path in flowtable addition path. 14) Fix FTP IPVS helper when NAT mangling is in place, patch from Julian Anastasov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert brnf_net_opsKirill Tkhai1-0/+1
These pernet_operations only unregister nf hooks. So, they are able to be marked as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert br_net_opsKirill Tkhai1-0/+1
These pernet_operations are similar to bond_net_ops. Exit method unregisters all net bridge devices, and it looks like another pernet_operations are not interested in foreign net bridge list. So, it's possible to mark them async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26bridge: Fix VLAN reference count problemIdo Schimmel1-0/+2
When a VLAN is added on a port, a reference is taken on the corresponding master VLAN entry. If it does not already exist, then it is created and a reference taken. However, in the second case a reference is not really taken when CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by refcount_inc_not_zero(). Fix this by using refcount_set() on a newly created master VLAN entry. Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-25netfilter: increase IPSTATS_MIB_CSUMERRORS statTaehee Yoo1-1/+3
In the ip_rcv, IPSTATS_MIB_CSUMERRORS is increased when checksum error is occurred. bridge netfilter routine should increase IPSTATS_MIB_CSUMERRORS. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsetsFlorian Westphal1-1/+12
We need to make sure the offsets are not out of range of the total size. Also check that they are in ascending order. The WARN_ON triggered by syzkaller (it sets panic_on_warn) is changed to also bail out, no point in continuing parsing. Briefly tested with simple ruleset of -A INPUT --limit 1/s' --log plus jump to custom chains using 32bit ebtables binary. Reported-by: <syzbot+845a53d13171abf8bf29@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: ebtables: convert BUG_ONs to WARN_ONsFlorian Westphal1-9/+18
All of these conditions are not fatal and should have been WARN_ONs from the get-go. Convert them to WARN_ONs and bail out. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-25netfilter: bridge: ebt_among: add missing match size checksFlorian Westphal1-2/+19
ebt_among is special, it has a dynamic match size and is exempt from the central size checks. Therefore it must check that the size of the match structure provided from userspace is sane by making sure em->match_size is at least the minimum size of the expected structure. The module has such a check, but its only done after accessing a structure that might be out of bounds. tested with: ebtables -A INPUT ... \ --among-dst fe:fe:fe:fe:fe:fe --among-dst fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fb,fe:fe:fe:fe:fc:fd,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe --among-src fe:fe:fe:fe:ff:f,fe:fe:fe:fe:fe:fa,fe:fe:fe:fe:fe:fd,fe:fe:fe:fe:fe:fe,fe:fe:fe:fe:fe:fe Reported-by: <syzbot+fe0b19af568972814355@syzkaller.appspotmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-7/+7
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains large batch with Netfilter fixes for your net tree, mostly due to syzbot report fixups and pr_err() ratelimiting, more specifically, they are: 1) Get rid of superfluous unnecessary check in x_tables before vmalloc(), we don't hit BUG there anymore, patch from Michal Hock, suggested by Andrew Morton. 2) Race condition in proc file creation in ipt_CLUSTERIP, from Cong Wang. 3) Drop socket lock that results in circular locking dependency, patch from Paolo Abeni. 4) Drop packet if case of malformed blob that makes backpointer jump in x_tables, from Florian Westphal. 5) Fix refcount leak due to race in ipt_CLUSTERIP in clusterip_config_find_get(), from Cong Wang. 6) Several patches to ratelimit pr_err() for x_tables since this can be a problem where CAP_NET_ADMIN semantics can protect us in untrusted namespace, from Florian Westphal. 7) Missing .gitignore update for new autogenerated asn1 state machine for the SNMP NAT helper, from Zhu Lingshan. 8) Missing timer initialization in xt_LED, from Paolo Abeni. 9) Do not allow negative port range in NAT, also from Paolo. 10) Lock imbalance in the xt_hashlimit rate match mode, patch from Eric Dumazet. 11) Initialize workqueue before timer in the idletimer match, from Eric Dumazet. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14netfilter: bridge: use pr ratelimitingFlorian Westphal2-7/+7
ebt_among still uses pr_err -- these errors indicate ebtables tool bug, not a usage error. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-02-12bridge: check brport attr show in brport_showXin Long1-0/+3
Now br_sysfs_if file flush doesn't have attr show. To read it will cause kernel panic after users chmod u+r this file. Xiong found this issue when running the commands: ip link add br0 type bridge ip link add type veth ip link set veth0 master br0 chmod u+r /sys/devices/virtual/net/veth0/brport/flush timeout 3 cat /sys/devices/virtual/net/veth0/brport/flush kernel crashed with NULL a pointer dereference call trace. This patch is to fix it by return -EINVAL when brport_attr->show is null, just the same as the check for brport_attr->store in brport_store(). Fixes: 9cf637473c85 ("bridge: add sysfs hook to flush forwarding table") Reported-by: Xiong Zhou <xzhou@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-01net: bridge: Fix uninitialized error in br_fdb_sync_static()Geert Uytterhoeven1-1/+1
With gcc-4.1.2.: net/bridge/br_fdb.c: In function ‘br_fdb_sync_static’: net/bridge/br_fdb.c:996: warning: ‘err’ may be used uninitialized in this function Indeed, if the list is empty, err will be uninitialized, and will be propagated up as the function return value. Fix this by preinitializing err to zero. Fixes: eb7935830d00b9e0 ("net: bridge: use rhashtable for fdbs") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22bridge: return boolean instead of integer in br_multicast_is_routerGustavo A. R. Silva1-1/+1
Return statements in functions returning bool should use true/false instead of 1/0. This issue was detected with the help of Coccinelle. Fixes: 85b352693264 ("bridge: Fix build error when IGMP_SNOOPING is not enabled") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19netfilter: remove messages print and boot/module load timePablo Neira Ayuso1-2/+0
Several reasons for this: * Several modules maintain internal version numbers, that they print at boot/module load time, that are not exposed to userspace, as a primitive mechanism to make revision number control from the earlier days of Netfilter. * IPset shows the protocol version at boot/module load time, instead display this via module description, as Jozsef suggested. * Remove copyright notice at boot/module load time in two spots, the Netfilter codebase is a collective development effort, if we would have to display copyrights for each contributor at boot/module load time for each extensions we have, we would probably fill up logs with lots of useless information - from a technical standpoint. So let's be consistent and remove them all. Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-10netfilter: nf_tables: get rid of struct nft_af_info abstractionPablo Neira Ayuso1-23/+2
Remove the infrastructure to register/unregister nft_af_info structure, this structure stores no useful information anymore. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-10netfilter: nf_tables: get rid of pernet familiesPablo Neira Ayuso1-33/+5
Now that we have a single table list for each netns, we can get rid of one pointer per family and the global afinfo list, thus, shrinking struct netns for nftables that now becomes 64 bytes smaller. And call __nft_release_afinfo() from __net_exit path accordingly to release netnamespace objects on removal. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-10netfilter: nf_tables: remove nhooks field from struct nft_af_infoPablo Neira Ayuso1-1/+0
We already validate the hook through bitmask, so this check is superfluous. When removing this, this patch is also fixing a bug in the new flowtable codebase, since ctx->afi points to the table family instead of the netdev family which is where the flowtable is really hooked in. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: remove struct nf_afinfo and its helper functionsPablo Neira Ayuso1-12/+4
This abstraction has no clients anymore, remove it. This is what remains from previous authors, so correct copyright statement after recent modifications and code removal. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: move reroute indirection to struct nf_ipv6_opsPablo Neira Ayuso1-7/+0
We cannot make a direct call to nf_ip6_reroute() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define reroute indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: move route indirection to struct nf_ipv6_opsPablo Neira Ayuso1-7/+0
We cannot make a direct call to nf_ip6_route() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define route indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: remove saveroute indirection in struct nf_afinfoPablo Neira Ayuso1-6/+0
This is only used by nf_queue.c and this function comes with no symbol dependencies with IPv6, it just refers to structure layouts. Therefore, we can replace it by a direct function call from where it belongs. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: move checksum_partial indirection to struct nf_ipv6_opsPablo Neira Ayuso1-8/+0
We cannot make a direct call to nf_ip6_checksum_partial() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define checksum_partial indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: move checksum indirection to struct nf_ipv6_opsPablo Neira Ayuso1-7/+0
We cannot make a direct call to nf_ip6_checksum() because that would result in autoloading the 'ipv6' module because of symbol dependencies. Therefore, define checksum indirection in nf_ipv6_ops where this really belongs to. For IPv4, we can indeed make a direct function call, which is faster, given IPv4 is built-in in the networking code by default. Still, CONFIG_INET=n and CONFIG_NETFILTER=y is possible, so define empty inline stub for IPv4 in such case. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: nf_tables: remove hooks from family definitionPablo Neira Ayuso1-7/+7
They don't belong to the family definition, move them to the filter chain type definition instead. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: nf_tables: remove multihook chains and familiesPablo Neira Ayuso1-1/+0
Since NFPROTO_INET is handled from the core, we don't need to maintain extra infrastructure in nf_tables to handle the double hook registration, one for IPv4 and another for IPv6. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-01-08netfilter: nf_tables: explicit nft_set_pktinfo() call from hook pathPablo Neira Ayuso1-3/+5
Instead of calling this function from the family specific variant, this reduces the code size in the fast path for the netdev, bridge and inet families. After this change, we must call nft_set_pktinfo() upfront from the chain hook indirection. Before: text data bss dec hex filename 2145 208 0 2353 931 net/netfilter/nf_tables_netdev.o After: text data bss dec hex filename 2125 208 0 2333 91d net/netfilter/nf_tables_netdev.o Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>