summaryrefslogtreecommitdiffstats
path: root/net/bpfilter
AgeCommit message (Collapse)AuthorFilesLines
2022-02-25uaccess: remove CONFIG_SET_FSArnd Bergmann1-1/+1
There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic] Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-25bpfilter: Specify the log level for the kmsg messageGary Lin1-1/+1
Per the kmsg document [0], if we don't specify the log level with a prefix "<N>" in the message string, the default log level will be applied to the message. Since the default level could be warning(4), this would make the log utility such as journalctl treat the message, "Started bpfilter", as a warning. To avoid confusion, this commit adds the prefix "<5>" to make the message always a notice. [0] https://www.kernel.org/doc/Documentation/ABI/testing/dev-kmsg Fixes: 36c4357c63f3 ("net: bpfilter: print umh messages to /dev/kmsg") Reported-by: Martin Loviska <mloviska@suse.com> Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Dmitrii Banshchikov <me@ubique.spb.ru> Link: https://lore.kernel.org/bpf/20210623040918.8683-1-glin@suse.com
2021-01-27net: remove redundant 'depends on NET'Masahiro Yamada1-1/+1
These Kconfig files are included from net/Kconfig, inside the if NET ... endif. Remove 'depends on NET', which we know it is already met. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210125232026.106855-1-masahiroy@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-20bpf: Add kernel module with user mode driver that populates bpffs.Alexei Starovoitov1-0/+1
Add kernel module with user mode driver that populates bpffs with BPF iterators. $ mount bpffs /my/bpffs/ -t bpf $ ls -la /my/bpffs/ total 4 drwxrwxrwt 2 root root 0 Jul 2 00:27 . drwxr-xr-x 19 root root 4096 Jul 2 00:09 .. -rw------- 1 root root 0 Jul 2 00:27 maps.debug -rw------- 1 root root 0 Jul 2 00:27 progs.debug The user mode driver will load BPF Type Formats, create BPF maps, populate BPF maps, load two BPF programs, attach them to BPF iterators, and finally send two bpf_link IDs back to the kernel. The kernel will pin two bpf_links into newly mounted bpffs instance under names "progs.debug" and "maps.debug". These two files become human readable. $ cat /my/bpffs/progs.debug id name attached 11 dump_bpf_map bpf_iter_bpf_map 12 dump_bpf_prog bpf_iter_bpf_prog 27 test_pkt_access 32 test_main test_pkt_access test_pkt_access 33 test_subprog1 test_pkt_access_subprog1 test_pkt_access 34 test_subprog2 test_pkt_access_subprog2 test_pkt_access 35 test_subprog3 test_pkt_access_subprog3 test_pkt_access 36 new_get_skb_len get_skb_len test_pkt_access 37 new_get_skb_ifindex get_skb_ifindex test_pkt_access 38 new_get_constant get_constant test_pkt_access The BPF program dump_bpf_prog() in iterators.bpf.c is printing this data about all BPF programs currently loaded in the system. This information is unstable and will change from kernel to kernel as ".debug" suffix conveys. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200819042759.51280-4-alexei.starovoitov@gmail.com
2020-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-1/+1
Daniel Borkmann says: ==================== pull-request: bpf 2020-07-31 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 21 day(s) which contain a total of 5 files changed, 126 insertions(+), 18 deletions(-). The main changes are: 1) Fix a map element leak in HASH_OF_MAPS map type, from Andrii Nakryiko. 2) Fix a NULL pointer dereference in __btf_resolve_helper_id() when no btf_vmlinux is available, from Peilin Ye. 3) Init pos variable in __bpfilter_process_sockopt(), from Christoph Hellwig. 4) Fix a cgroup sockopt verifier test by specifying expected attach type, from Jean-Philippe Brucker. Note that when net gets merged into net-next later on, there is a small merge conflict in kernel/bpf/btf.c between commit 5b801dfb7feb ("bpf: Fix NULL pointer dereference in __btf_resolve_helper_id()") from the bpf tree and commit 138b9a0511c7 ("bpf: Remove btf_id helpers resolving") from the net-next tree. Resolve as follows: remove the old hunk with the __btf_resolve_helper_id() function. Change the btf_resolve_helper_id() so it actually tests for a NULL btf_vmlinux and bails out: int btf_resolve_helper_id(struct bpf_verifier_log *log, const struct bpf_func_proto *fn, int arg) { int id; if (fn->arg_type[arg] != ARG_PTR_TO_BTF_ID || !btf_vmlinux) return -EINVAL; id = fn->btf_id[arg]; if (!id || id > btf_vmlinux->nr_types) return -EINVAL; return id; } Let me know if you run into any others issues (CC'ing Jiri Olsa so he's in the loop with regards to merge conflict resolution). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31net/bpfilter: Initialize pos in __bpfilter_process_sockoptChristoph Hellwig1-1/+1
__bpfilter_process_sockopt never initialized the pos variable passed to the pipe write. This has been mostly harmless in the past as pipes ignore the offset, but the switch to kernel_write now verified the position, which can lead to a failure depending on the exact stack initialization pattern. Initialize the variable to zero to make rw_verify_area happy. Fixes: 6955a76fbcd5 ("bpfilter: switch to kernel_write") Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Rodrigo Madera <rodrigo.madera@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Rodrigo Madera <rodrigo.madera@gmail.com> Tested-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/bpf/20200730160900.187157-1-hch@lst.de
2020-07-24bpfilter: switch bpfilter_ip_set_sockopt to sockptr_tChristoph Hellwig1-3/+3
This is mostly to prepare for cleaning up the callers, as bpfilter by design can't handle kernel pointers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24bpfilter: reject kernel addressesChristoph Hellwig1-0/+4
The bpfilter user mode helper processes the optval address using process_vm_readv. Don't send it kernel addresses fed under set_fs(KERNEL_DS) as that won't work. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net/bpfilter: split __bpfilter_process_sockoptChristoph Hellwig1-24/+27
Split __bpfilter_process_sockopt into a low-level send request routine and the actual setsockopt hook to split the init time ping from the actual setsockopt processing. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24bpfilter: fix up a sparse annotationChristoph Hellwig1-1/+1
The __user doesn't make sense when casting to an integer type, just switch to a uintptr_t cast which also removes the need for the __force. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14bpfilter: Allow to build bpfilter_umh as a module without static libraryMasahiro Yamada2-4/+8
Originally, bpfilter_umh was linked with -static only when CONFIG_BPFILTER_UMH=y. Commit 8a2cc0505cc4 ("bpfilter: use 'userprogs' syntax to build bpfilter_umh") silently, accidentally dropped the CONFIG_BPFILTER_UMH=y test in the Makefile. Revive it in order to link it dynamically when CONFIG_BPFILTER_UMH=m. Since commit b1183b6dca3e ("bpfilter: check if $(CC) can link static libc in Kconfig"), the compiler must be capable of static linking to enable CONFIG_BPFILTER_UMH, but it requires more than needed. To loosen the compiler requirement, I changed the dependency as follows: depends on CC_CAN_LINK depends on m || CC_CAN_LINK_STATIC If CONFIG_CC_CAN_LINK_STATIC in unset, CONFIG_BPFILTER_UMH is restricted to 'm' or 'n'. In theory, CONFIG_CC_CAN_LINK is not required for CONFIG_BPFILTER_UMH=y, but I did not come up with a good way to describe it. Fixes: 8a2cc0505cc4 ("bpfilter: use 'userprogs' syntax to build bpfilter_umh") Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/bpf/20200701092644.762234-1-masahiroy@kernel.org
2020-07-14bpfilter: Initialize pos variableAlexei Starovoitov1-0/+1
Make sure 'pos' is initialized to zero before calling kernel_write(). Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-07-14Merge branch 'usermode-driver-cleanup' of ↵Alexei Starovoitov2-20/+20
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace into bpf-next
2020-07-08bpfilter: switch to kernel_writeChristoph Hellwig1-1/+1
While pipes don't really need sb_writers projection, __kernel_write is an interface better kept private, and the additional rw_verify_area does not hurt here. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-07bpfilter: Take advantage of the facilities of struct pidEric W. Biederman1-10/+5
Instead of relying on the exit_umh cleanup callback use the fact a struct pid can be tested to see if a process still exists, and that struct pid has a wait queue that notifies when the process dies. v1: https://lkml.kernel.org/r/87h7uydlu9.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/874kqt4owu.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-14-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-04umd: Track user space drivers with struct pidEric W. Biederman1-8/+5
Use struct pid instead of user space pid values that are prone to wrap araound. In addition track the entire thread group instead of just the first thread that is started by exec. There are no multi-threaded user mode drivers today but there is nothing preclucing user drivers from being multi-threaded, so it is just a good idea to track the entire process. Take a reference count on the tgid's in question to make it possible to remove exit_umh in a future change. As a struct pid is available directly use kill_pid_info. The prior process signalling code was iffy in using a userspace pid known to be in the initial pid namespace and then looking up it's task in whatever the current pid namespace is. It worked only because kernel threads always run in the initial pid namespace. As the tgid is now refcounted verify the tgid is NULL at the start of fork_usermode_driver to avoid the possibility of silent pid leaks. v1: https://lkml.kernel.org/r/87mu4qdlv2.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/a70l4oy8.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-12-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-04bpfilter: Move bpfilter_umh back into init dataEric W. Biederman1-1/+1
To allow for restarts 61fbf5933d42 ("net: bpfilter: restart bpfilter_umh when error occurred") moved the blob holding the userspace binary out of the init sections. Now that loading the blob into a filesystem is separate from executing the blob the blob no longer needs to live .rodata to allow for restarting. So move the blob back to .init.rodata. v1: https://lkml.kernel.org/r/87sgeidlvq.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/87ftad4ozc.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-11-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-07-04umd: Transform fork_usermode_blob into fork_usermode_driverEric W. Biederman1-3/+11
Instead of loading a binary blob into a temporary file with shmem_kernel_file_setup load a binary blob into a temporary tmpfs filesystem. This means that the blob can be stored in an init section and discared, and it means the binary blob will have a filename so can be executed normally. The only tricky thing about this code is that in the helper function blob_to_mnt __fput_sync is used. That is because a file can not be executed if it is still open for write, and the ordinary delayed close for kernel threads does not happen soon enough, which causes the following exec to fail. The function umd_load_blob is not called with any locks so this should be safe. Executing the blob normally winds up correcting several problems with the user mode driver code discovered by Tetsuo Handa[1]. By passing an ordinary filename into the exec, it is no longer necessary to figure out how to turn a O_RDWR file descriptor into a properly referende counted O_EXEC file descriptor that forbids all writes. For path based LSMs there are no new special cases. [1] https://lore.kernel.org/linux-fsdevel/2a8775b4-1dd5-9d5c-aa42-9872445e0942@i-love.sakura.ne.jp/ v1: https://lkml.kernel.org/r/87d05mf0j9.fsf_-_@x220.int.ebiederm.org v2: https://lkml.kernel.org/r/87wo3p4p35.fsf_-_@x220.int.ebiederm.org Link: https://lkml.kernel.org/r/20200702164140.4468-8-ebiederm@xmission.com Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2020-05-26bpfilter: document build requirements for bpfilter_umhValdis Kl ē tnieks1-0/+4
It's not intuitively obvious that bpfilter_umh is a statically linked binary. Mention the toolchain requirement in the Kconfig help, so people have an easier time figuring out what's needed. Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-17bpfilter: use 'userprogs' syntax to build bpfilter_umhMasahiro Yamada1-8/+4
The user mode helper should be compiled for the same architecture as the kernel. This Makefile reused the 'hostprogs' syntax by overriding HOSTCC with CC. Use the new syntax 'userprogs' to fix the Makefile mess. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2020-05-17bpfilter: check if $(CC) can link static libc in KconfigMasahiro Yamada1-1/+1
On Fedora, linking static glibc requires the glibc-static RPM package, which is not part of the glibc-devel package. CONFIG_CC_CAN_LINK does not check the capability of static linking, so you can enable CONFIG_BPFILTER_UMH, then fail to build: HOSTLD net/bpfilter/bpfilter_umh /usr/bin/ld: cannot find -lc collect2: error: ld returned 1 exit status Add CONFIG_CC_CAN_LINK_STATIC, and make CONFIG_BPFILTER_UMH depend on it. Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Alexei Starovoitov <ast@kernel.org>
2020-05-17bpfilter: match bit size of bpfilter_umh to that of the kernelMasahiro Yamada1-2/+3
bpfilter_umh is built for the default machine bit of the compiler, which may not match to the bit size of the kernel. This happens in the scenario below: You can use biarch GCC that defaults to 64-bit for building the 32-bit kernel. In this case, Kbuild passes -m32 to teach the compiler to produce 32-bit kernel space objects. However, it is missing when building bpfilter_umh. It is built as a 64-bit ELF, and then embedded into the 32-bit kernel. The 32-bit kernel and 64-bit umh is a bad combination. In theory, we can have 32-bit umh running on 64-bit kernel, but we do not have a good reason to support such a usecase. The best is to match the bit size between them. Pass -m32 or -m64 to the umh build command if it is found in $(KBUILD_CFLAGS). Evaluate CC_CAN_LINK against the kernel bit-size. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-03-31net/bpfilter: remove superfluous testing messageBruno Meneguele1-1/+0
A testing message was brought by 13d0f7b814d9 ("net/bpfilter: fix dprintf usage for /dev/kmsg") but should've been deleted before patch submission. Although it doesn't cause any harm to the code or functionality itself, it's totally unpleasant to have it displayed on every loop iteration with no real use case. Thus remove it unconditionally. Fixes: 13d0f7b814d9 ("net/bpfilter: fix dprintf usage for /dev/kmsg") Signed-off-by: Bruno Meneguele <bmeneg@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada1-0/+1
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-14net/bpfilter: fix dprintf usage for /dev/kmsgBruno Meneguele1-6/+8
The bpfilter UMH code was recently changed to log its informative messages to /dev/kmsg, however this interface doesn't support SEEK_CUR yet, used by dprintf(). As result dprintf() returns -EINVAL and doesn't log anything. However there already had some discussions about supporting SEEK_CUR into /dev/kmsg interface in the past it wasn't concluded. Since the only user of that from userspace perspective inside the kernel is the bpfilter UMH (userspace) module it's better to correct it here instead waiting a conclusion on the interface. Fixes: 36c4357c63f3 ("net: bpfilter: print umh messages to /dev/kmsg") Signed-off-by: Bruno Meneguele <bmeneg@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-04kbuild: rename hostprogs-y/always to hostprogs/always-yMasahiro Yamada1-1/+1
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-07-12Merge tag 'kbuild-v5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-07-07net: bpfilter: print umh messages to /dev/kmsgGary Lin1-1/+1
bpfilter_umh currently printed all messages to /dev/console and this might interfere the user activity(*). This commit changes the output device to /dev/kmsg so that the messages from bpfilter_umh won't show on the console directly. (*) https://bugzilla.suse.com/show_bug.cgi?id=1140221 Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08init/Kconfig: add CONFIG_CC_CAN_LINKMasahiro Yamada1-1/+1
Currently, scripts/cc-can-link.sh is run just for BPFILTER_UMH, but defining CC_CAN_LINK will be useful in other places. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-27signal/bpfilter: Fix bpfilter_kernl to use send_sig not force_sigEric W. Biederman1-1/+1
The locking in force_sig_info is not prepared to deal with a task that exits or execs (as sighand may change). As force_sig is only built to handle synchronous exceptions. Further the function force_sig_info changes the signal state if the signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the delivery of the signal. The signal SIGKILL can not be ignored and can not be blocked and SIGNAL_UNKILLABLE won't prevent it from being delivered. So using force_sig rather than send_sig for SIGKILL is pointless. Because it won't impact the sending of the signal and and because using force_sig is wrong, replace force_sig with send_sig. Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada1-1/+1
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-23bpfilter: re-add header search paths to tools include to fix build errorMasahiro Yamada1-0/+1
I thought header search paths to tools/include(/uapi) were unneeded, but it looks like a build error occurs depending on the compiler. Commit 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") reintroduced the build error fixed by commit ae40832e53c3 ("bpfilter: fix a build err"). Apology for the breakage, and thanks to Guenter for reporting this. Fixes: 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03bpfilter: remove extra header search paths for bpfilter_umhMasahiro Yamada2-2/+1
Currently, the header search paths -Itools/include and -Itools/include/uapi are not used. Let's drop the unused code. We can remove -I. too by fixing up one C file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16net: bpfilter: change section name of bpfilter UMH blob.Taehee Yoo1-1/+1
The section of bpfilter UMH blob is the ".bpfilter_umh". but this is not an explicit section. so linking warning occurred at compile time for the powerpc. So, this patch makes use of the ".rodata" instead of the ".bpfilter_umh". Config condition: CONFIG_BPFILTER=y CONFIG_BPFILTER_UMH=y Result: ld: warning: orphan section `.bpfilter_umh' from `net/bpfilter/bpfilter_umh_blob.o' being placed in section `.bpfilter_umh' Fixes: 61fbf5933d42 ("net: bpfilter: restart bpfilter_umh when error occurred") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: bpfilter: disallow to remove bpfilter module while being usedTaehee Yoo1-17/+11
The bpfilter.ko module can be removed while functions of the bpfilter.ko are executing. so panic can occurred. in order to protect that, locks can be used. a bpfilter_lock protects routines in the __bpfilter_process_sockopt() but it's not enough because __exit routine can be executed concurrently. Now, the bpfilter_umh can not run in parallel. So, the module do not removed while it's being used and it do not double-create UMH process. The members of the umh_info and the bpfilter_umh_ops are protected by the bpfilter_umh_ops.lock. test commands: while : do iptables -I FORWARD -m string --string ap --algo kmp & modprobe -rv bpfilter & done splat looks like: [ 298.623435] BUG: unable to handle kernel paging request at fffffbfff807440b [ 298.628512] #PF error: [normal kernel read fault] [ 298.633018] PGD 124327067 P4D 124327067 PUD 11c1a3067 PMD 119eb2067 PTE 0 [ 298.638859] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 298.638859] CPU: 0 PID: 2997 Comm: iptables Not tainted 4.20.0+ #154 [ 298.638859] RIP: 0010:__mutex_lock+0x6b9/0x16a0 [ 298.638859] Code: c0 00 00 e8 89 82 ff ff 80 bd 8f fc ff ff 00 0f 85 d9 05 00 00 48 8b 85 80 fc ff ff 48 bf 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 38 00 0f 85 1d 0e 00 00 48 8b 85 c8 fc ff ff 49 39 47 58 c6 [ 298.638859] RSP: 0018:ffff88810e7777a0 EFLAGS: 00010202 [ 298.638859] RAX: 1ffffffff807440b RBX: ffff888111bd4d80 RCX: 0000000000000000 [ 298.638859] RDX: 1ffff110235ff806 RSI: ffff888111bd5538 RDI: dffffc0000000000 [ 298.638859] RBP: ffff88810e777b30 R08: 0000000080000002 R09: 0000000000000000 [ 298.638859] R10: 0000000000000000 R11: 0000000000000000 R12: fffffbfff168a42c [ 298.638859] R13: ffff888111bd4d80 R14: ffff8881040e9a05 R15: ffffffffc03a2000 [ 298.638859] FS: 00007f39e3758700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 [ 298.638859] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 298.638859] CR2: fffffbfff807440b CR3: 000000011243e000 CR4: 00000000001006f0 [ 298.638859] Call Trace: [ 298.638859] ? mutex_lock_io_nested+0x1560/0x1560 [ 298.638859] ? kasan_kmalloc+0xa0/0xd0 [ 298.638859] ? kmem_cache_alloc+0x1c2/0x260 [ 298.638859] ? __alloc_file+0x92/0x3c0 [ 298.638859] ? alloc_empty_file+0x43/0x120 [ 298.638859] ? alloc_file_pseudo+0x220/0x330 [ 298.638859] ? sock_alloc_file+0x39/0x160 [ 298.638859] ? __sys_socket+0x113/0x1d0 [ 298.638859] ? __x64_sys_socket+0x6f/0xb0 [ 298.638859] ? do_syscall_64+0x138/0x560 [ 298.638859] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 298.638859] ? __alloc_file+0x92/0x3c0 [ 298.638859] ? init_object+0x6b/0x80 [ 298.638859] ? cyc2ns_read_end+0x10/0x10 [ 298.638859] ? cyc2ns_read_end+0x10/0x10 [ 298.638859] ? hlock_class+0x140/0x140 [ 298.638859] ? sched_clock_local+0xd4/0x140 [ 298.638859] ? sched_clock_local+0xd4/0x140 [ 298.638859] ? check_flags.part.37+0x440/0x440 [ 298.638859] ? __lock_acquire+0x4f90/0x4f90 [ 298.638859] ? set_rq_offline.part.89+0x140/0x140 [ ... ] Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: bpfilter: restart bpfilter_umh when error occurredTaehee Yoo2-11/+28
The bpfilter_umh will be stopped via __stop_umh() when the bpfilter error occurred. The bpfilter_umh() couldn't start again because there is no restart routine. The section of the bpfilter_umh_{start/end} is no longer .init.rodata because these area should be reused in the restart routine. hence the section name is changed to .bpfilter_umh. The bpfilter_ops->start() is restart callback. it will be called when bpfilter_umh is stopped. The stop bit means bpfilter_umh is stopped. this bit is set by both start and stop routine. Before this patch, Test commands: $ iptables -vnL $ kill -9 <pid of bpfilter_umh> $ iptables -vnL [ 480.045136] bpfilter: write fail -32 $ iptables -vnL All iptables commands will fail. After this patch, Test commands: $ iptables -vnL $ kill -9 <pid of bpfilter_umh> $ iptables -vnL $ iptables -vnL Now, all iptables commands will work. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: bpfilter: use cleanup callback to release umh_infoTaehee Yoo1-13/+10
Now, UMH process is killed, do_exit() calls the umh_info->cleanup callback to release members of the umh_info. This patch makes bpfilter_umh's cleanup routine to use the umh_info->cleanup callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: bpfilter: Set user mode helper's command lineOlivier Brunel1-0/+1
Signed-off-by: Olivier Brunel <jjk@jjacky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17net: bpfilter: use get_pid_task instead of pid_taskTaehee Yoo1-2/+4
pid_task() dereferences rcu protected tasks array. But there is no rcu_read_lock() in shutdown_umh() routine so that rcu_read_lock() is needed. get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock() then calls pid_task(). if task isn't NULL, it increases reference count of task. test commands: %modprobe bpfilter %modprobe -rv bpfilter splat looks like: [15102.030932] ============================= [15102.030957] WARNING: suspicious RCU usage [15102.030985] 4.19.0-rc7+ #21 Not tainted [15102.031010] ----------------------------- [15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage! [15102.031063] other info that might help us debug this: [15102.031332] rcu_scheduler_active = 2, debug_locks = 1 [15102.031363] 1 lock held by modprobe/1570: [15102.031389] #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter] [15102.031552] stack backtrace: [15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21 [15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [15102.031628] Call Trace: [15102.031676] dump_stack+0xc9/0x16b [15102.031723] ? show_regs_print_info+0x5/0x5 [15102.031801] ? lockdep_rcu_suspicious+0x117/0x160 [15102.031855] pid_task+0x134/0x160 [15102.031900] ? find_vpid+0xf0/0xf0 [15102.032017] shutdown_umh.constprop.1+0x1e/0x53 [bpfilter] [15102.032055] stop_umh+0x46/0x52 [bpfilter] [15102.032092] __x64_sys_delete_module+0x47e/0x570 [ ... ] Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05net: bpfilter: Fix type cast and pointer warningsShanthosh RK1-2/+2
Fixes the following Sparse warnings: net/bpfilter/bpfilter_kern.c:62:21: warning: cast removes address space of expression net/bpfilter/bpfilter_kern.c:101:49: warning: Using plain integer as NULL pointer Signed-off-by: Shanthosh RK <shanthosh.rk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+0
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-07-24bpfilter: remove trailing newlineStephen Hemminger1-1/+0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGSLaura Abbott1-1/+1
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-1/+1
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-28bpfilter: include bpfilter_umh in assembly instead of using objcopyMasahiro Yamada3-21/+14
What we want here is to embed a user-space program into the kernel. Instead of the complex ELF magic, let's simply wrap it in the assembly with the '.incbin' directive. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 17:07:21 +0000