summaryrefslogtreecommitdiffstats
path: root/net/bpfilter
AgeCommit message (Collapse)AuthorFilesLines
2019-07-12Merge tag 'kbuild-v5.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+1
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-07-07net: bpfilter: print umh messages to /dev/kmsgGary Lin1-1/+1
bpfilter_umh currently printed all messages to /dev/console and this might interfere the user activity(*). This commit changes the output device to /dev/kmsg so that the messages from bpfilter_umh won't show on the console directly. (*) https://bugzilla.suse.com/show_bug.cgi?id=1140221 Signed-off-by: Gary Lin <glin@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08init/Kconfig: add CONFIG_CC_CAN_LINKMasahiro Yamada1-1/+1
Currently, scripts/cc-can-link.sh is run just for BPFILTER_UMH, but defining CC_CAN_LINK will be useful in other places. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-27signal/bpfilter: Fix bpfilter_kernl to use send_sig not force_sigEric W. Biederman1-1/+1
The locking in force_sig_info is not prepared to deal with a task that exits or execs (as sighand may change). As force_sig is only built to handle synchronous exceptions. Further the function force_sig_info changes the signal state if the signal is ignored, or blocked or if SIGNAL_UNKILLABLE will prevent the delivery of the signal. The signal SIGKILL can not be ignored and can not be blocked and SIGNAL_UNKILLABLE won't prevent it from being delivered. So using force_sig rather than send_sig for SIGKILL is pointless. Because it won't impact the sending of the signal and and because using force_sig is wrong, replace force_sig with send_sig. Cc: Alexei Starovoitov <ast@kernel.org> Cc: David S. Miller <davem@davemloft.net> Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-18treewide: prefix header search paths with $(srctree)/Masahiro Yamada1-1/+1
Currently, the Kbuild core manipulates header search paths in a crazy way [1]. To fix this mess, I want all Makefiles to add explicit $(srctree)/ to the search paths in the srctree. Some Makefiles are already written in that way, but not all. The goal of this work is to make the notation consistent, and finally get rid of the gross hacks. Having whitespaces after -I does not matter since commit 48f6e3cf5bc6 ("kbuild: do not drop -I without parameter"). [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-23bpfilter: re-add header search paths to tools include to fix build errorMasahiro Yamada1-0/+1
I thought header search paths to tools/include(/uapi) were unneeded, but it looks like a build error occurs depending on the compiler. Commit 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") reintroduced the build error fixed by commit ae40832e53c3 ("bpfilter: fix a build err"). Apology for the breakage, and thanks to Guenter for reporting this. Fixes: 303a339f30a9 ("bpfilter: remove extra header search paths for bpfilter_umh") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03bpfilter: remove extra header search paths for bpfilter_umhMasahiro Yamada2-2/+1
Currently, the header search paths -Itools/include and -Itools/include/uapi are not used. Let's drop the unused code. We can remove -I. too by fixing up one C file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16net: bpfilter: change section name of bpfilter UMH blob.Taehee Yoo1-1/+1
The section of bpfilter UMH blob is the ".bpfilter_umh". but this is not an explicit section. so linking warning occurred at compile time for the powerpc. So, this patch makes use of the ".rodata" instead of the ".bpfilter_umh". Config condition: CONFIG_BPFILTER=y CONFIG_BPFILTER_UMH=y Result: ld: warning: orphan section `.bpfilter_umh' from `net/bpfilter/bpfilter_umh_blob.o' being placed in section `.bpfilter_umh' Fixes: 61fbf5933d42 ("net: bpfilter: restart bpfilter_umh when error occurred") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: bpfilter: disallow to remove bpfilter module while being usedTaehee Yoo1-17/+11
The bpfilter.ko module can be removed while functions of the bpfilter.ko are executing. so panic can occurred. in order to protect that, locks can be used. a bpfilter_lock protects routines in the __bpfilter_process_sockopt() but it's not enough because __exit routine can be executed concurrently. Now, the bpfilter_umh can not run in parallel. So, the module do not removed while it's being used and it do not double-create UMH process. The members of the umh_info and the bpfilter_umh_ops are protected by the bpfilter_umh_ops.lock. test commands: while : do iptables -I FORWARD -m string --string ap --algo kmp & modprobe -rv bpfilter & done splat looks like: [ 298.623435] BUG: unable to handle kernel paging request at fffffbfff807440b [ 298.628512] #PF error: [normal kernel read fault] [ 298.633018] PGD 124327067 P4D 124327067 PUD 11c1a3067 PMD 119eb2067 PTE 0 [ 298.638859] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 298.638859] CPU: 0 PID: 2997 Comm: iptables Not tainted 4.20.0+ #154 [ 298.638859] RIP: 0010:__mutex_lock+0x6b9/0x16a0 [ 298.638859] Code: c0 00 00 e8 89 82 ff ff 80 bd 8f fc ff ff 00 0f 85 d9 05 00 00 48 8b 85 80 fc ff ff 48 bf 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 38 00 0f 85 1d 0e 00 00 48 8b 85 c8 fc ff ff 49 39 47 58 c6 [ 298.638859] RSP: 0018:ffff88810e7777a0 EFLAGS: 00010202 [ 298.638859] RAX: 1ffffffff807440b RBX: ffff888111bd4d80 RCX: 0000000000000000 [ 298.638859] RDX: 1ffff110235ff806 RSI: ffff888111bd5538 RDI: dffffc0000000000 [ 298.638859] RBP: ffff88810e777b30 R08: 0000000080000002 R09: 0000000000000000 [ 298.638859] R10: 0000000000000000 R11: 0000000000000000 R12: fffffbfff168a42c [ 298.638859] R13: ffff888111bd4d80 R14: ffff8881040e9a05 R15: ffffffffc03a2000 [ 298.638859] FS: 00007f39e3758700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 [ 298.638859] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 298.638859] CR2: fffffbfff807440b CR3: 000000011243e000 CR4: 00000000001006f0 [ 298.638859] Call Trace: [ 298.638859] ? mutex_lock_io_nested+0x1560/0x1560 [ 298.638859] ? kasan_kmalloc+0xa0/0xd0 [ 298.638859] ? kmem_cache_alloc+0x1c2/0x260 [ 298.638859] ? __alloc_file+0x92/0x3c0 [ 298.638859] ? alloc_empty_file+0x43/0x120 [ 298.638859] ? alloc_file_pseudo+0x220/0x330 [ 298.638859] ? sock_alloc_file+0x39/0x160 [ 298.638859] ? __sys_socket+0x113/0x1d0 [ 298.638859] ? __x64_sys_socket+0x6f/0xb0 [ 298.638859] ? do_syscall_64+0x138/0x560 [ 298.638859] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 298.638859] ? __alloc_file+0x92/0x3c0 [ 298.638859] ? init_object+0x6b/0x80 [ 298.638859] ? cyc2ns_read_end+0x10/0x10 [ 298.638859] ? cyc2ns_read_end+0x10/0x10 [ 298.638859] ? hlock_class+0x140/0x140 [ 298.638859] ? sched_clock_local+0xd4/0x140 [ 298.638859] ? sched_clock_local+0xd4/0x140 [ 298.638859] ? check_flags.part.37+0x440/0x440 [ 298.638859] ? __lock_acquire+0x4f90/0x4f90 [ 298.638859] ? set_rq_offline.part.89+0x140/0x140 [ ... ] Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: bpfilter: restart bpfilter_umh when error occurredTaehee Yoo2-11/+28
The bpfilter_umh will be stopped via __stop_umh() when the bpfilter error occurred. The bpfilter_umh() couldn't start again because there is no restart routine. The section of the bpfilter_umh_{start/end} is no longer .init.rodata because these area should be reused in the restart routine. hence the section name is changed to .bpfilter_umh. The bpfilter_ops->start() is restart callback. it will be called when bpfilter_umh is stopped. The stop bit means bpfilter_umh is stopped. this bit is set by both start and stop routine. Before this patch, Test commands: $ iptables -vnL $ kill -9 <pid of bpfilter_umh> $ iptables -vnL [ 480.045136] bpfilter: write fail -32 $ iptables -vnL All iptables commands will fail. After this patch, Test commands: $ iptables -vnL $ kill -9 <pid of bpfilter_umh> $ iptables -vnL $ iptables -vnL Now, all iptables commands will work. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: bpfilter: use cleanup callback to release umh_infoTaehee Yoo1-13/+10
Now, UMH process is killed, do_exit() calls the umh_info->cleanup callback to release members of the umh_info. This patch makes bpfilter_umh's cleanup routine to use the umh_info->cleanup callback. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: bpfilter: Set user mode helper's command lineOlivier Brunel1-0/+1
Signed-off-by: Olivier Brunel <jjk@jjacky.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17net: bpfilter: use get_pid_task instead of pid_taskTaehee Yoo1-2/+4
pid_task() dereferences rcu protected tasks array. But there is no rcu_read_lock() in shutdown_umh() routine so that rcu_read_lock() is needed. get_pid_task() is wrapper function of pid_task. it holds rcu_read_lock() then calls pid_task(). if task isn't NULL, it increases reference count of task. test commands: %modprobe bpfilter %modprobe -rv bpfilter splat looks like: [15102.030932] ============================= [15102.030957] WARNING: suspicious RCU usage [15102.030985] 4.19.0-rc7+ #21 Not tainted [15102.031010] ----------------------------- [15102.031038] kernel/pid.c:330 suspicious rcu_dereference_check() usage! [15102.031063] other info that might help us debug this: [15102.031332] rcu_scheduler_active = 2, debug_locks = 1 [15102.031363] 1 lock held by modprobe/1570: [15102.031389] #0: 00000000580ef2b0 (bpfilter_lock){+.+.}, at: stop_umh+0x13/0x52 [bpfilter] [15102.031552] stack backtrace: [15102.031583] CPU: 1 PID: 1570 Comm: modprobe Not tainted 4.19.0-rc7+ #21 [15102.031607] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015 [15102.031628] Call Trace: [15102.031676] dump_stack+0xc9/0x16b [15102.031723] ? show_regs_print_info+0x5/0x5 [15102.031801] ? lockdep_rcu_suspicious+0x117/0x160 [15102.031855] pid_task+0x134/0x160 [15102.031900] ? find_vpid+0xf0/0xf0 [15102.032017] shutdown_umh.constprop.1+0x1e/0x53 [bpfilter] [15102.032055] stop_umh+0x46/0x52 [bpfilter] [15102.032092] __x64_sys_delete_module+0x47e/0x570 [ ... ] Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05net: bpfilter: Fix type cast and pointer warningsShanthosh RK1-2/+2
Fixes the following Sparse warnings: net/bpfilter/bpfilter_kern.c:62:21: warning: cast removes address space of expression net/bpfilter/bpfilter_kern.c:101:49: warning: Using plain integer as NULL pointer Signed-off-by: Shanthosh RK <shanthosh.rk@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+0
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-07-24bpfilter: remove trailing newlineStephen Hemminger1-1/+0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGSLaura Abbott1-1/+1
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-1/+1
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-28bpfilter: include bpfilter_umh in assembly instead of using objcopyMasahiro Yamada3-21/+14
What we want here is to embed a user-space program into the kernel. Instead of the complex ELF magic, let's simply wrap it in the assembly with the '.incbin' directive. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28bpfilter: check compiler capability in KconfigMasahiro Yamada1-1/+1
With the brand-new syntax extension of Kconfig, we can directly check the compiler capability in the configuration phase. If the cc-can-link.sh fails, the BPFILTER_UMH is automatically hidden by the dependency. I also deleted 'default n', which is no-op. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21bpfilter: fix user mode helper cross compilationMatteo Croce1-1/+1
Use $(OBJDUMP) instead of literal 'objdump' to avoid using host toolchain when cross compiling. Fixes: 421780fd4983 ("bpfilter: fix build error") Signed-off-by: Matteo Croce <mcroce@redhat.com> Reported-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20bpfilter: ignore binary filesMatteo Croce1-0/+1
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c17a064 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20bpfilter: fix build errorMatteo Croce1-2/+4
bpfilter Makefile assumes that the system locale is en_US, and the parsing of objdump output fails. Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns only 2 processes instead of 7. Fixes: d2ba09c17a064 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-07bpfilter: fix race in pipe accessAlexei Starovoitov1-3/+7
syzbot reported the following crash [ 338.293946] bpfilter: read fail -512 [ 338.304515] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 338.311863] general protection fault: 0000 [#1] SMP KASAN [ 338.344360] RIP: 0010:__vfs_write+0x4a6/0x960 [ 338.426363] Call Trace: [ 338.456967] __kernel_write+0x10c/0x380 [ 338.460928] __bpfilter_process_sockopt+0x1d8/0x35b [ 338.487103] bpfilter_mbox_request+0x4d/0xb0 [ 338.491492] bpfilter_ip_get_sockopt+0x6b/0x90 This can happen when multiple cpus trying to talk to user mode process via bpfilter_mbox_request(). One cpu grabs the mutex while another goes to sleep on the same mutex. Then former cpu sees that umh pipe is down and shuts down the pipes. Later cpu finally acquires the mutex and crashes on freed pipe. Fix the race by using info.pid as an indicator that umh and pipes are healthy and check it after acquiring the mutex. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: syzbot+7ade6c94abb2774c0fee@syzkaller.appspotmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-07bpfilter: fix OUTPUT_FORMATAlexei Starovoitov1-1/+1
CONFIG_OUTPUT_FORMAT is x86 only macro. Used objdump to extract elf file format. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05bpfilter: switch to CC from HOSTCCAlexei Starovoitov1-0/+2
check that CC can build executables and use that compiler instead of HOSTCC Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29bpfilter: fix a build errYueHaibing1-1/+1
gcc-7.3.0 report following err: HOSTCC net/bpfilter/main.o In file included from net/bpfilter/main.c:9:0: ./include/uapi/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory #include <linux/bpf_common.h> remove it by adding a include path. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29bpfilter: fix building without CONFIG_INETArnd Bergmann1-2/+5
bpfilter_process_sockopt is a callback that gets called from ip_setsockopt() and ip_getsockopt(). However, when CONFIG_INET is disabled, it never gets called at all, and assigning a function to the callback pointer results in a link failure: net/bpfilter/bpfilter_kern.o: In function `__stop_umh': bpfilter_kern.c:(.text.unlikely+0x3): undefined reference to `bpfilter_process_sockopt' net/bpfilter/bpfilter_kern.o: In function `load_umh': bpfilter_kern.c:(.init.text+0x73): undefined reference to `bpfilter_process_sockopt' Since there is no caller in this configuration, I assume we can simply make the assignment conditional. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24bpfilter: don't pass O_CREAT when opening console for debugJakub Kicinski1-1/+1
Passing O_CREAT (00000100) to open means we should also pass file mode as the third parameter. Creating /dev/console as a regular file may not be helpful anyway, so simply drop the flag when opening debug_fd. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24bpfilter: fix build dependencyAlexei Starovoitov1-1/+1
BPFILTER could have been enabled without INET causing this build error: ERROR: "bpfilter_process_sockopt" [net/bpfilter/bpfilter.ko] undefined! Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: add skeleton of bpfilter kernel moduleAlexei Starovoitov5-0/+237
bpfilter.ko consists of bpfilter_kern.c (normal kernel module code) and user mode helper code that is embedded into bpfilter.ko The steps to build bpfilter.ko are the following: - main.c is compiled by HOSTCC into the bpfilter_umh elf executable file - with quite a bit of objcopy and Makefile magic the bpfilter_umh elf file is converted into bpfilter_umh.o object file with _binary_net_bpfilter_bpfilter_umh_start and _end symbols Example: $ nm ./bld_x64/net/bpfilter/bpfilter_umh.o 0000000000004cf8 T _binary_net_bpfilter_bpfilter_umh_end 0000000000004cf8 A _binary_net_bpfilter_bpfilter_umh_size 0000000000000000 T _binary_net_bpfilter_bpfilter_umh_start - bpfilter_umh.o and bpfilter_kern.o are linked together into bpfilter.ko bpfilter_kern.c is a normal kernel module code that calls the fork_usermode_blob() helper to execute part of its own data as a user mode process. Notice that _binary_net_bpfilter_bpfilter_umh_start - end is placed into .init.rodata section, so it's freed as soon as __init function of bpfilter.ko is finished. As part of __init the bpfilter.ko does first request/reply action via two unix pipe provided by fork_usermode_blob() helper to make sure that umh is healthy. If not it will kill it via pid. Later bpfilter_process_sockopt() will be called from bpfilter hooks in get/setsockopt() to pass iptable commands into umh via bpfilter.ko If admin does 'rmmod bpfilter' the __exit code bpfilter.ko will kill umh as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 05:16:11 +0000