summaryrefslogtreecommitdiffstats
path: root/net/bpfilter
AgeCommit message (Collapse)AuthorFilesLines
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-1/+0
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-07-24bpfilter: remove trailing newlineStephen Hemminger1-1/+0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18kbuild: Rename HOSTLDFLAGS to KBUILD_HOSTLDFLAGSLaura Abbott1-1/+1
In preparation for enabling command line LDFLAGS, re-name HOSTLDFLAGS to KBUILD_HOSTLDFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: Rename HOSTCFLAGS to KBUILD_HOSTCFLAGSLaura Abbott1-1/+1
In preparation for enabling command line CFLAGS, re-name HOSTCFLAGS to KBUILD_HOSTCFLAGS as the internal use only flags. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-28bpfilter: include bpfilter_umh in assembly instead of using objcopyMasahiro Yamada3-21/+14
What we want here is to embed a user-space program into the kernel. Instead of the complex ELF magic, let's simply wrap it in the assembly with the '.incbin' directive. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28bpfilter: check compiler capability in KconfigMasahiro Yamada1-1/+1
With the brand-new syntax extension of Kconfig, we can directly check the compiler capability in the configuration phase. If the cc-can-link.sh fails, the BPFILTER_UMH is automatically hidden by the dependency. I also deleted 'default n', which is no-op. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21bpfilter: fix user mode helper cross compilationMatteo Croce1-1/+1
Use $(OBJDUMP) instead of literal 'objdump' to avoid using host toolchain when cross compiling. Fixes: 421780fd4983 ("bpfilter: fix build error") Signed-off-by: Matteo Croce <mcroce@redhat.com> Reported-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20bpfilter: ignore binary filesMatteo Croce1-0/+1
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c17a064 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-20bpfilter: fix build errorMatteo Croce1-2/+4
bpfilter Makefile assumes that the system locale is en_US, and the parsing of objdump output fails. Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns only 2 processes instead of 7. Fixes: d2ba09c17a064 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-07bpfilter: fix race in pipe accessAlexei Starovoitov1-3/+7
syzbot reported the following crash [ 338.293946] bpfilter: read fail -512 [ 338.304515] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 338.311863] general protection fault: 0000 [#1] SMP KASAN [ 338.344360] RIP: 0010:__vfs_write+0x4a6/0x960 [ 338.426363] Call Trace: [ 338.456967] __kernel_write+0x10c/0x380 [ 338.460928] __bpfilter_process_sockopt+0x1d8/0x35b [ 338.487103] bpfilter_mbox_request+0x4d/0xb0 [ 338.491492] bpfilter_ip_get_sockopt+0x6b/0x90 This can happen when multiple cpus trying to talk to user mode process via bpfilter_mbox_request(). One cpu grabs the mutex while another goes to sleep on the same mutex. Then former cpu sees that umh pipe is down and shuts down the pipes. Later cpu finally acquires the mutex and crashes on freed pipe. Fix the race by using info.pid as an indicator that umh and pipes are healthy and check it after acquiring the mutex. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: syzbot+7ade6c94abb2774c0fee@syzkaller.appspotmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-07bpfilter: fix OUTPUT_FORMATAlexei Starovoitov1-1/+1
CONFIG_OUTPUT_FORMAT is x86 only macro. Used objdump to extract elf file format. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05bpfilter: switch to CC from HOSTCCAlexei Starovoitov1-0/+2
check that CC can build executables and use that compiler instead of HOSTCC Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29bpfilter: fix a build errYueHaibing1-1/+1
gcc-7.3.0 report following err: HOSTCC net/bpfilter/main.o In file included from net/bpfilter/main.c:9:0: ./include/uapi/linux/bpf.h:12:10: fatal error: linux/bpf_common.h: No such file or directory #include <linux/bpf_common.h> remove it by adding a include path. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29bpfilter: fix building without CONFIG_INETArnd Bergmann1-2/+5
bpfilter_process_sockopt is a callback that gets called from ip_setsockopt() and ip_getsockopt(). However, when CONFIG_INET is disabled, it never gets called at all, and assigning a function to the callback pointer results in a link failure: net/bpfilter/bpfilter_kern.o: In function `__stop_umh': bpfilter_kern.c:(.text.unlikely+0x3): undefined reference to `bpfilter_process_sockopt' net/bpfilter/bpfilter_kern.o: In function `load_umh': bpfilter_kern.c:(.init.text+0x73): undefined reference to `bpfilter_process_sockopt' Since there is no caller in this configuration, I assume we can simply make the assignment conditional. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24bpfilter: don't pass O_CREAT when opening console for debugJakub Kicinski1-1/+1
Passing O_CREAT (00000100) to open means we should also pass file mode as the third parameter. Creating /dev/console as a regular file may not be helpful anyway, so simply drop the flag when opening debug_fd. Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24bpfilter: fix build dependencyAlexei Starovoitov1-1/+1
BPFILTER could have been enabled without INET causing this build error: ERROR: "bpfilter_process_sockopt" [net/bpfilter/bpfilter.ko] undefined! Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: add skeleton of bpfilter kernel moduleAlexei Starovoitov5-0/+237
bpfilter.ko consists of bpfilter_kern.c (normal kernel module code) and user mode helper code that is embedded into bpfilter.ko The steps to build bpfilter.ko are the following: - main.c is compiled by HOSTCC into the bpfilter_umh elf executable file - with quite a bit of objcopy and Makefile magic the bpfilter_umh elf file is converted into bpfilter_umh.o object file with _binary_net_bpfilter_bpfilter_umh_start and _end symbols Example: $ nm ./bld_x64/net/bpfilter/bpfilter_umh.o 0000000000004cf8 T _binary_net_bpfilter_bpfilter_umh_end 0000000000004cf8 A _binary_net_bpfilter_bpfilter_umh_size 0000000000000000 T _binary_net_bpfilter_bpfilter_umh_start - bpfilter_umh.o and bpfilter_kern.o are linked together into bpfilter.ko bpfilter_kern.c is a normal kernel module code that calls the fork_usermode_blob() helper to execute part of its own data as a user mode process. Notice that _binary_net_bpfilter_bpfilter_umh_start - end is placed into .init.rodata section, so it's freed as soon as __init function of bpfilter.ko is finished. As part of __init the bpfilter.ko does first request/reply action via two unix pipe provided by fork_usermode_blob() helper to make sure that umh is healthy. If not it will kill it via pid. Later bpfilter_process_sockopt() will be called from bpfilter hooks in get/setsockopt() to pass iptable commands into umh via bpfilter.ko If admin does 'rmmod bpfilter' the __exit code bpfilter.ko will kill umh as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>