summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2010-11-09Bluetooth: fix not setting security level when creating a rfcomm sessionLuiz Augusto von Dentz1-3/+10
This cause 'No Bonding' to be used if userspace has not yet been paired with remote device since the l2cap socket used to create the rfcomm session does not have any security level set. Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix endianness conversion in L2CAPGustavo F. Padovan1-2/+2
Last commit added a wrong endianness conversion. Fixing that. Reported-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix unaligned access to l2cap conf datasteven miao1-4/+4
In function l2cap_get_conf_opt() and l2cap_add_conf_opt() the address of opt->val sometimes is not at the edge of 2-bytes/4-bytes, so 2-bytes/4 bytes access will cause data misalignment exeception. Use get_unaligned_le16/32 and put_unaligned_le16/32 function to avoid data misalignment execption. Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: Fix non-SSP auth request for HIGH security level socketsJohan Hedberg1-0/+6
When initiating dedicated bonding a L2CAP raw socket with HIGH security level is used. The kernel is supposed to trigger the authentication request in this case but this doesn't happen currently for non-SSP (pre-2.1) devices. The reason is that the authentication request happens in the remote extended features callback which never gets called for non-SSP devices. This patch fixes the issue by requesting also authentiation in the (normal) remote features callback in the case of non-SSP devices. This rule is applied only for HIGH security level which might at first seem unintuitive since on the server socket side MEDIUM is already enough for authentication. However, for the clients we really want to prefer the server side to decide the authentication requrement in most cases, and since most client sockets use MEDIUM it's better to be avoided on the kernel side for these sockets. The important socket to request it for is the dedicated bonding one and that socket uses HIGH security level. The patch is based on the initial investigation and patch proposal from Andrei Emeltchenko <endrei.emeltchenko@nokia.com>. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-11-09Bluetooth: fix hidp kconfig dependency warningRandy Dunlap1-1/+1
Fix kconfig dependency warning to satisfy dependencies: warning: (BT_HIDP && NET && BT && BT_L2CAP && INPUT || USB_HID && HID_SUPPORT && USB && INPUT) selects HID which has unmet direct dependencies (HID_SUPPORT && INPUT) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds10-166/+199
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-22tty: icount changeover for other main devicesAlan Cox1-4/+0
Again basically cut and paste Convert the main driver set to use the hooks for GICOUNT Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-21Merge branch 'master' of ↵David S. Miller1-2/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
2010-10-17Bluetooth: fix oops in l2cap_connect_reqNathan Holstein1-2/+2
In error cases when the ACL is insecure or we fail to allocate a new struct sock, we jump to the "response" label. If so, "sk" will be null and the kernel crashes. Signed-off-by: Nathan Holstein <nathan.holstein@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: clean up rfcomm codeAndrei Emeltchenko1-15/+14
Remove dead code and unused rfcomm thread events Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Update conf_state before send config_req outHaijun Liu1-0/+1
Update conf_state with L2CAP_CONF_REQ_SENT before send config_req out in l2cap_config_req(). Signed-off-by: Haijun Liu <haijun.liu@atheros.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use the proper error value from bt_skb_send_alloc()Gustavo F. Padovan1-4/+4
&err points to the proper error set by bt_skb_send_alloc() when it fails. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: make batostr() print in the right orderGustavo F. Padovan5-28/+10
The Bluetooth core uses the the BD_ADDR in the opposite order from the human readable order. So we are changing batostr() to print in the correct order and then removing some baswap(), as they are not needed anymore. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: remove unused variable from cmtpGustavo F. Padovan1-2/+1
A value was attributed to 'src', but no one was using. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: check for l2cap header in start fragmentAndrei Emeltchenko1-1/+2
BLUETOOTH SPECIFICATION Version 4.0 [Vol 3] page 36 mentioned "Note: Start Fragments always begin with the Basic L2CAP header of a PDU." Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: check L2CAP length in first ACL fragmentAndrei Emeltchenko1-0/+16
Current Bluetooth code assembles fragments of big L2CAP packets in l2cap_recv_acldata and then checks allowed L2CAP size in assemled L2CAP packet (pi->imtu < skb->len). The patch moves allowed L2CAP size check to the early stage when we receive the first fragment of L2CAP packet. We do not need to reserve and keep L2CAP fragments for bad packets. Updated version after comments from Mat Martineau <mathewm@codeaurora.org> and Gustavo Padovan <padovan@profusion.mobi>. Trace below is received when using stress tools sending big fragmented L2CAP packets. ... [ 1712.798492] swapper: page allocation failure. order:4, mode:0x4020 [ 1712.804809] [<c0031870>] (unwind_backtrace+0x0/0xdc) from [<c00a1f70>] (__alloc_pages_nodemask+0x4) [ 1712.814666] [<c00a1f70>] (__alloc_pages_nodemask+0x47c/0x4d4) from [<c00a1fd8>] (__get_free_pages+) [ 1712.824645] [<c00a1fd8>] (__get_free_pages+0x10/0x3c) from [<c026eb5c>] (__alloc_skb+0x4c/0xfc) [ 1712.833465] [<c026eb5c>] (__alloc_skb+0x4c/0xfc) from [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 ) [ 1712.843322] [<bf28c738>] (l2cap_recv_acldata+0xf0/0x1f8 [l2cap]) from [<bf0094ac>] (hci_rx_task+0x) ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Don't clear the blacklist when closing the HCI deviceJohan Hedberg1-1/+0
Clearing the blacklist in hci_dev_do_close() would mean that user space needs to do extra work to re-block devices after a DEVDOWN-DEVUP cycle. This patch removes the clearing of the blacklist in this case and thereby saves user space from the extra work. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: remove extra newline from debug outputAndrei Emeltchenko1-1/+1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use a stream-oriented recvmsg with SOCK_STREAM L2CAP sockets.Mat Martineau1-0/+3
L2CAP ERTM sockets can be opened with the SOCK_STREAM socket type, which is a mandatory request for ERTM mode. However, these sockets still have SOCK_SEQPACKET read semantics when bt_sock_recvmsg() is used to pull data from the receive queue. If the application is only reading part of a frame, then the unread portion of the frame is discarded. If the application requests more bytes than are in the current frame, only the current frame's data is returned. This patch utilizes common code derived from RFCOMM's recvmsg() function to make L2CAP SOCK_STREAM reads behave like RFCOMM reads (and other SOCK_STREAM sockets in general). The application may read one byte at a time from the input stream and not lose any data, and may also read across L2CAP frame boundaries. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Use common SOCK_STREAM receive code in RFCOMMMat Martineau1-98/+6
To reduce code duplication, have rfcomm_sock_recvmsg() call bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg() code is nearly identical, with the RFCOMM-specific functionality for deferred setup and connection unthrottling left in rfcomm_sock_recvmsg(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Add common code for stream-oriented recvmsg()Mat Martineau1-0/+109
This commit adds a bt_sock_stream_recvmsg() function for use by any Bluetooth code that uses SOCK_STREAM sockets. This code is copied from rfcomm_sock_recvmsg() with minimal modifications to remove RFCOMM-specific functionality and improve readability. L2CAP (with the SOCK_STREAM socket type) and RFCOMM have common needs when it comes to reading data. Proper stream read semantics require that applications can read from a stream one byte at a time and not lose any data. The RFCOMM code already operated on and pulled data from the underlying L2CAP socket, so very few changes were required to make the code more generic for use with non-RFCOMM data over L2CAP. Applications that need more awareness of L2CAP frame boundaries are still free to use SOCK_SEQPACKET sockets, and may verify that they connection did not fall back to basic mode by calling getsockopt(). Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Validate PSM values in calls to connect() and bind()Mat Martineau1-4/+21
Valid L2CAP PSMs are odd numbers, and the least significant bit of the most significant byte must be 0. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: Fix RFCOMM RPN negotiationYuri Kululin1-4/+4
According to the ETSI 3GPP TS 07.10 the default bit rate value for RFCOMM is 9600 bit/s. Return this bit rate in case of RPN request and accept other sane bit rates proposed by the sender in RPM command. Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-12Bluetooth: HCI devices are either BR/EDR or AMP radiosDavid Vrabel1-2/+2
HCI transport drivers may not know what type of radio an AMP device has so only say whether they're BR/EDR or AMP devices. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-11Merge branch 'master' of ↵David S. Miller2-33/+33
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/ethtool.c
2010-10-04Bluetooth: Disallow to change L2CAP_OPTIONS values when connectedGustavo F. Padovan1-0/+5
L2CAP doesn't permit change like MTU, FCS, TxWindow values while the connection is alive, we can only set that before the connection/configuration process. That can lead to bugs in the L2CAP operation. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Revert "Bluetooth: Don't accept ConfigReq if we aren't in the BT_CONFIG state"Gustavo F. Padovan1-7/+1
This reverts commit 8cb8e6f1684be13b51f8429b15f39c140326b327. That commit introduced a regression with the Bluetooth Profile Tuning Suite(PTS), Reverting this make sure that L2CAP is in a qualificable state. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: Fix inconsistent lock state with RFCOMMGustavo F. Padovan1-0/+4
When receiving a rfcomm connection with the old dund deamon a inconsistent lock state happens. That's because interrupts were already disabled by l2cap_conn_start() when rfcomm_sk_state_change() try to lock the spin_lock. As result we may have a inconsistent lock state for l2cap_conn_start() after rfcomm_sk_state_change() calls bh_lock_sock() and disable interrupts as well. [ 2833.151999] [ 2833.151999] ================================= [ 2833.151999] [ INFO: inconsistent lock state ] [ 2833.151999] 2.6.36-rc3 #2 [ 2833.151999] --------------------------------- [ 2833.151999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 2833.151999] krfcommd/2306 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 2833.151999] (slock-AF_BLUETOOTH){+.?...}, at: [<ffffffffa00bcb56>] rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] {IN-SOFTIRQ-W} state was registered at: [ 2833.151999] [<ffffffff81094346>] __lock_acquire+0x5b6/0x1560 [ 2833.151999] [<ffffffff8109534a>] lock_acquire+0x5a/0x70 [ 2833.151999] [<ffffffff81392b6c>] _raw_spin_lock+0x2c/0x40 [ 2833.151999] [<ffffffffa00a5092>] l2cap_conn_start+0x92/0x640 [l2cap] [ 2833.151999] [<ffffffffa00a6a3f>] l2cap_sig_channel+0x6bf/0x1320 [l2cap] [ 2833.151999] [<ffffffffa00a9173>] l2cap_recv_frame+0x133/0x770 [l2cap] [ 2833.151999] [<ffffffffa00a997b>] l2cap_recv_acldata+0x1cb/0x390 [l2cap] [ 2833.151999] [<ffffffffa000db4b>] hci_rx_task+0x2ab/0x450 [bluetooth] [ 2833.151999] [<ffffffff8106b22b>] tasklet_action+0xcb/0xe0 [ 2833.151999] [<ffffffff8106b91e>] __do_softirq+0xae/0x150 [ 2833.151999] [<ffffffff8102bc0c>] call_softirq+0x1c/0x30 [ 2833.151999] [<ffffffff8102ddb5>] do_softirq+0x75/0xb0 [ 2833.151999] [<ffffffff8106b56d>] irq_exit+0x8d/0xa0 [ 2833.151999] [<ffffffff8104484b>] smp_apic_timer_interrupt+0x6b/0xa0 [ 2833.151999] [<ffffffff8102b6d3>] apic_timer_interrupt+0x13/0x20 [ 2833.151999] [<ffffffff81029dfa>] cpu_idle+0x5a/0xb0 [ 2833.151999] [<ffffffff81381ded>] rest_init+0xad/0xc0 [ 2833.151999] [<ffffffff817ebc4d>] start_kernel+0x2dd/0x2e8 [ 2833.151999] [<ffffffff817eb2e6>] x86_64_start_reservations+0xf6/0xfa [ 2833.151999] [<ffffffff817eb3ce>] x86_64_start_kernel+0xe4/0xeb [ 2833.151999] irq event stamp: 731 [ 2833.151999] hardirqs last enabled at (731): [<ffffffff8106b762>] local_bh_enable_ip+0x82/0xe0 [ 2833.151999] hardirqs last disabled at (729): [<ffffffff8106b93e>] __do_softirq+0xce/0x150 [ 2833.151999] softirqs last enabled at (730): [<ffffffff8106b96e>] __do_softirq+0xfe/0x150 [ 2833.151999] softirqs last disabled at (711): [<ffffffff8102bc0c>] call_softirq+0x1c/0x30 [ 2833.151999] [ 2833.151999] other info that might help us debug this: [ 2833.151999] 2 locks held by krfcommd/2306: [ 2833.151999] #0: (rfcomm_mutex){+.+.+.}, at: [<ffffffffa00bb744>] rfcomm_run+0x174/0xb20 [rfcomm] [ 2833.151999] #1: (&(&d->lock)->rlock){+.+...}, at: [<ffffffffa00b9223>] rfcomm_dlc_accept+0x53/0x100 [rfcomm] [ 2833.151999] [ 2833.151999] stack backtrace: [ 2833.151999] Pid: 2306, comm: krfcommd Tainted: G W 2.6.36-rc3 #2 [ 2833.151999] Call Trace: [ 2833.151999] [<ffffffff810928e1>] print_usage_bug+0x171/0x180 [ 2833.151999] [<ffffffff810936c3>] mark_lock+0x333/0x400 [ 2833.151999] [<ffffffff810943ca>] __lock_acquire+0x63a/0x1560 [ 2833.151999] [<ffffffff810948b5>] ? __lock_acquire+0xb25/0x1560 [ 2833.151999] [<ffffffff8109534a>] lock_acquire+0x5a/0x70 [ 2833.151999] [<ffffffffa00bcb56>] ? rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffff81392b6c>] _raw_spin_lock+0x2c/0x40 [ 2833.151999] [<ffffffffa00bcb56>] ? rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffffa00bcb56>] rfcomm_sk_state_change+0x46/0x170 [rfcomm] [ 2833.151999] [<ffffffffa00b9239>] rfcomm_dlc_accept+0x69/0x100 [rfcomm] [ 2833.151999] [<ffffffffa00b9a49>] rfcomm_check_accept+0x59/0xd0 [rfcomm] [ 2833.151999] [<ffffffffa00bacab>] rfcomm_recv_frame+0x9fb/0x1320 [rfcomm] [ 2833.151999] [<ffffffff813932bb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60 [ 2833.151999] [<ffffffff81093acd>] ? trace_hardirqs_on_caller+0x13d/0x180 [ 2833.151999] [<ffffffff81093b1d>] ? trace_hardirqs_on+0xd/0x10 [ 2833.151999] [<ffffffffa00bb7f1>] rfcomm_run+0x221/0xb20 [rfcomm] [ 2833.151999] [<ffffffff813905e7>] ? schedule+0x287/0x780 [ 2833.151999] [<ffffffffa00bb5d0>] ? rfcomm_run+0x0/0xb20 [rfcomm] [ 2833.151999] [<ffffffff81081026>] kthread+0x96/0xa0 [ 2833.151999] [<ffffffff8102bb14>] kernel_thread_helper+0x4/0x10 [ 2833.151999] [<ffffffff813936bc>] ? restore_args+0x0/0x30 [ 2833.151999] [<ffffffff81080f90>] ? kthread+0x0/0xa0 [ 2833.151999] [<ffffffff8102bb10>] ? kernel_thread_helper+0x0/0x10 Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: Simplify L2CAP Streaming mode sendingGustavo F. Padovan1-17/+7
As we don't have any error control on the Streaming mode, i.e., we don't need to keep a copy of the skb for later resending we don't need to call skb_clone() on it. Then we can go one further here, and dequeue the skb before sending it, that also means we don't need to look to sk->sk_send_head anymore. The patch saves memory and time when sending Streaming mode data, so it is good to mainline. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: fix MTU L2CAP configuration parameterAndrei Emeltchenko1-3/+3
When receiving L2CAP negative configuration response with respect to MTU parameter we modify wrong field. MTU here means proposed value of MTU that the remote device intends to transmit. So for local L2CAP socket it is pi->imtu. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com> Acked-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-30Bluetooth: Only enable L2CAP FCS for ERTM or streamingMat Martineau1-6/+13
This fixes a bug which caused the FCS setting to show L2CAP_FCS_CRC16 with L2CAP modes other than ERTM or streaming. At present, this only affects the FCS value shown with getsockopt() for basic mode. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-09-23net: return operator cleanupEric Dumazet1-2/+2
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06net: poll() optimizationsEric Dumazet1-3/+2
No need to test twice sk->sk_shutdown & RCV_SHUTDOWN Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-10Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTMMat Martineau1-2/+0
remote_tx_win is intended to be set on receipt of an L2CAP configuration request. The value is used to determine the size of the transmit window on the remote side of an ERTM connection, so L2CAP can stop sending frames when that remote window is full. An incorrect remote_tx_win value will cause the stack to not fully utilize the tx window (performance impact), or to overfill the remote tx window (causing dropped frames or a disconnect). This patch removes an extra setting of remote_tx_win when a configuration response is received. The transmit window has a different meaning in a response - it is an informational value less than or equal to the local tx_win. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-10Bluetooth: Fix endianness issue with L2CAP MPS configurationMat Martineau1-4/+5
Incoming configuration values must be converted to native CPU order before use. This fixes a bug where a little-endian MPS value is compared to a native CPU value. On big-endian processors, this can cause ERTM and streaming mode segmentation to produce PDUs that are larger than the remote stack is expecting, or that would produce fragmented skbs that the current FCS code cannot handle. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04Bluetooth: Check result code of L2CAP information responseVille Tervo1-0/+9
Check result code of L2CAP information response. Otherwise it would read invalid feature mask and access invalid memory. Signed-off-by: Ville Tervo <ville.tervo@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-08-04Bluetooth: Don't send RFC for Basic Mode if only it is supportedGustavo F. Padovan1-3/+12
If the remote side doesn't support Enhanced Retransmission Mode neither Streaming Mode, we shall not send the RFC option. Some devices that only supports Basic Mode do not understanding the RFC option. This patch fixes the regression found with these devices. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-31Bluetooth: Remove __exit from rfcomm_cleanup_ttys()Gustavo F. Padovan1-1/+1
rfcomm_cleanup_ttys() is also called from rfcomm_init(), so it can't have __exit. Reported-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-31Bluetooth: Use list_head for HCI blacklist headDavid Miller3-8/+5
The bdaddr in the list root is completely unused and just taking up space. Signed-off-by: David S. Miller <davem@davemloft.net> Tested-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Add __init and __exit marks to RFCOMMGustavo F. Padovan2-3/+3
Those annotation save memory and space on the binary. __init code is discarded just after execute and __exit code is discarded if the module is built into the kernel image or unload of modules is not allowed. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Test 'count' value before enter the loopGustavo F. Padovan1-4/+4
Testing first we avoid enter the loop when count = 0. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Defer SCO setup if mode change is pendingMarcel Holtmann2-20/+43
Certain headsets such as the Motorola H350 will reject SCO and eSCO connection requests while the ACL is transitioning from sniff mode to active mode. Add synchronization so that SCO and eSCO connection requests will wait until the ACL has fully transitioned to active mode. < HCI Command: Exit Sniff Mode (0x02|0x0004) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Exit Sniff Mode (0x02|0x0004) status 0x00 ncmd 1 < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 12 voice setting 0x0040 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 1 > HCI Event: Mode Change (0x14) plen 6 status 0x00 handle 12 mode 0x00 interval 0 Mode: Active > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x10 handle 14 bdaddr 00:1A:0E:50:28:A4 type SCO Error: Connection Accept Timeout Exceeded Signed-off-by: Ron Shaffer <rshaffer@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Enable L2CAP Extended features by defaultGustavo F. Padovan1-9/+9
Change the enable_ertm param to disable_ertm and default value to 0. That means that L2CAP Extended features are enabled by default now. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Fix typo in hci_event.cGustavo F. Padovan1-2/+2
memmory -> memory Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add Google's copyright to L2CAPGustavo F. Padovan1-0/+1
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Implemented HCI frame reassembly for RX from streamSuraj Sumangala1-0/+35
Implemented frame reassembly implementation for reassembling fragments received from stream. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Modified hci_recv_fragment() to use hci_reassembly helperSuraj Sumangala1-74/+11
Modified packet based reassembly function hci_recv_fragment() to use hci_reassembly() Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Implement hci_reassembly helper to reassemble RX packetsSuraj Sumangala1-0/+109
Implements feature to reassemble received HCI frames from any input stream Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Add one more buffer for HCI stream reassemblySuraj Sumangala1-3/+3
Additional reassembly buffer to keep track of stream reasembly Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-21Bluetooth: Update L2CAP version informationGustavo F. Padovan1-1/+1
We did some changes on the L2CAP configuration process and its behaviour is bit different now. That justifies a updated on the L2CAP version. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 20:45:54 +0000