summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2021-09-01Merge tag 'tty-5.15-rc1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
2021-08-20Merge tag 'for-net-next-2021-08-19' of ↵David S. Miller8-179/+296
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - Add support for Foxconn Mediatek Chip - Add support for LG LGSBWAC92/TWCM-K505D - hci_h5 flow control fixes and suspend support - Switch to use lock_sock for SCO and RFCOMM - Various fixes for extended advertising - Reword Intel's setup on btusb unifying the supported generations ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19Bluetooth: Fix return value in hci_dev_do_close()Kangmin Park1-3/+4
hci_error_reset() return without calling hci_dev_do_open() when hci_dev_do_close() return error value which is not 0. Also, hci_dev_close() return hci_dev_do_close() function's return value. But, hci_dev_do_close() return always 0 even if hdev->shutdown return error value. So, fix hci_dev_do_close() to save and return the return value of the hdev->shutdown when it is called. Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-19Bluetooth: add timeout sanity check to hci_inquiryPavel Skripkin1-0/+6
Syzbot hit "task hung" bug in hci_req_sync(). The problem was in unreasonable huge inquiry timeout passed from userspace. Fix it by adding sanity check for timeout value to hci_inquiry(). Since hci_inquiry() is the only user of hci_req_sync() with user controlled timeout value, it makes sense to check timeout value in hci_inquiry() and don't touch hci_req_sync(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+be2baed593ea56c6a84c@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-19Bluetooth: mgmt: Pessimize compile-time bounds-checkKees Cook1-1/+1
After gaining __alloc_size hints, GCC thinks it can reach a memcpy() with eir_len == 0 (since it can't see into the rewrite of status). Instead, check eir_len == 0, avoiding this future warning: In function 'eir_append_data', inlined from 'read_local_oob_ext_data_complete' at net/bluetooth/mgmt.c:7210:12: ./include/linux/fortify-string.h:54:29: warning: '__builtin_memcpy' offset 5 is out of the bounds [0, 3] [-Warray-bounds] ... net/bluetooth/hci_request.h:133:2: note: in expansion of macro 'memcpy' 133 | memcpy(&eir[eir_len], data, data_len); | ^~~~~~ Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-16Bluetooth: Fix race condition in handling NOP commandKiran K1-6/+4
For NOP command, need to cancel work scheduled on cmd_timer, on receiving command status or commmand complete event. Below use case might lead to race condition multiple when NOP commands are queued sequentially: hci_cmd_work() { if (atomic_read(&hdev->cmd_cnt) { . . . atomic_dec(&hdev->cmd_cnt); hci_send_frame(hdev,...); schedule_delayed_work(&hdev->cmd_timer,...); } } On receiving event for first NOP, the work scheduled on hdev->cmd_timer is not cancelled and second NOP is dequeued and sent to controller. While waiting for an event for second NOP command, work scheduled on cmd_timer for the first NOP can get scheduled, resulting in sending third NOP command (sending back to back NOP commands). This might cause issues at controller side (like memory overrun, controller going unresponsive) resulting in hci tx timeouts, hardware errors etc. The fix to this issue is to cancel the delayed work scheduled on cmd_timer on receiving command status or command complete event for NOP command (this patch handles NOP command same as any other SIG command). Signed-off-by: Kiran K <kiran.k@intel.com> Reviewed-by: Chethan T N <chethan.tumkur.narayan@intel.com> Reviewed-by: Srivatsa Ravishankar <ravishankar.srivatsa@intel.com> Acked-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-16Bluetooth: Store advertising handle so it can be re-enabledLuiz Augusto von Dentz1-16/+29
This stores the advertising handle/instance into hci_conn so it is accessible when re-enabling the advertising once disconnected. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-16Bluetooth: Fix handling of LE Enhanced Connection CompleteLuiz Augusto von Dentz1-31/+62
LE Enhanced Connection Complete contains the Local RPA used in the connection which must be used when set otherwise there could problems when pairing since the address used by the remote stack could be the Local RPA: BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 4, Part E page 2396 'Resolvable Private Address being used by the local device for this connection. This is only valid when the Own_Address_Type (from the HCI_LE_Create_Connection, HCI_LE_Set_Advertising_Parameters, HCI_LE_Set_Extended_Advertising_Parameters, or HCI_LE_Extended_Create_Connection commands) is set to 0x02 or 0x03, and the Controller generated a resolvable private address for the local device using a non-zero local IRK. For other Own_Address_Type values, the Controller shall return all zeros.' Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-16Bluetooth: Move shutdown callback before flushing tx and rx queueKai-Heng Feng1-8/+8
Commit 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled") introduced a regression that makes mtkbtsdio driver stops working: [ 36.593956] Bluetooth: hci0: Firmware already downloaded [ 46.814613] Bluetooth: hci0: Execution of wmt command timed out [ 46.814619] Bluetooth: hci0: Failed to send wmt func ctrl (-110) The shutdown callback depends on the result of hdev->rx_work, so we should call it before flushing rx_work: -> btmtksdio_shutdown() -> mtk_hci_wmt_sync() -> __hci_cmd_send() -> wait for BTMTKSDIO_TX_WAIT_VND_EVT gets cleared -> btmtksdio_recv_event() -> hci_recv_frame() -> queue_work(hdev->workqueue, &hdev->rx_work) -> clears BTMTKSDIO_TX_WAIT_VND_EVT So move the shutdown callback before flushing TX/RX queue to resolve the issue. Reported-and-tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Fixes: 0ea9fd001a14 ("Bluetooth: Shutdown controller after workqueues are flushed or cancelled") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-10Bluetooth: fix repeated calls to sco_sock_killDesmond Cheong Zhi Xi1-6/+1
In commit 4e1a720d0312 ("Bluetooth: avoid killing an already killed socket"), a check was added to sco_sock_kill to skip killing a socket if the SOCK_DEAD flag was set. This was done after a trace for a use-after-free bug showed that the same sock pointer was being killed twice. Unfortunately, this check prevents sco_sock_kill from running on any socket. sco_sock_kill kills a socket only if it's zapped and orphaned, however sock_orphan announces that the socket is dead before detaching it. i.e., orphaned sockets have the SOCK_DEAD flag set. To fix this, we remove the check for SOCK_DEAD, and avoid repeated calls to sco_sock_kill by removing incorrect calls in: 1. sco_sock_timeout. The socket should not be killed on timeout as further processing is expected to be done. For example, sco_sock_connect sets the timer then waits for the socket to be connected or for an error to be returned. 2. sco_conn_del. This function should clean up resources for the connection, but the socket itself should be cleaned up in sco_sock_release. 3. sco_sock_close. Calls to sco_sock_close in sco_sock_cleanup_listen and sco_sock_release are followed by sco_sock_kill. Hence the duplicated call should be removed. Fixes: 4e1a720d0312 ("Bluetooth: avoid killing an already killed socket") Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-10Bluetooth: switch to lock_sock in RFCOMMDesmond Cheong Zhi Xi1-4/+4
Other than rfcomm_sk_state_change and rfcomm_connect_ind, functions in RFCOMM use lock_sock to lock the socket. Since bh_lock_sock and spin_lock_bh do not provide synchronization with lock_sock, these calls should be changed to lock_sock. This is now safe to do because packet processing is now done in a workqueue instead of a tasklet, so bh_lock_sock/spin_lock_bh are no longer necessary to synchronise between user contexts and SOFTIRQ processing. Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-10Bluetooth: serialize calls to sco_sock_{set,clear}_timerDesmond Cheong Zhi Xi1-2/+2
Currently, calls to sco_sock_set_timer are made under the locked socket, but this does not apply to all calls to sco_sock_clear_timer. Both sco_sock_{set,clear}_timer should be serialized by lock_sock to prevent unexpected concurrent clearing/setting of timers. Additionally, since sco_pi(sk)->conn is only cleared under the locked socket, this change allows us to avoid races between sco_sock_clear_timer and the call to kfree(conn) in sco_conn_del. Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-10Bluetooth: switch to lock_sock in SCODesmond Cheong Zhi Xi1-9/+9
Since sco_sock_timeout is now scheduled using delayed work, it is no longer run in SOFTIRQ context. Hence bh_lock_sock is no longer necessary in SCO to synchronise between user contexts and SOFTIRQ processing. As such, calls to bh_lock_sock should be replaced with lock_sock to synchronize with other concurrent processes that use lock_sock. Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-10Bluetooth: avoid circular locks in sco_sock_connectDesmond Cheong Zhi Xi1-23/+16
In a future patch, calls to bh_lock_sock in sco.c should be replaced by lock_sock now that none of the functions are run in IRQ context. However, doing so results in a circular locking dependency: ====================================================== WARNING: possible circular locking dependency detected 5.14.0-rc4-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.2/14867 is trying to acquire lock: ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1613 [inline] ffff88803e3c1120 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191 but task is already holding lock: ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_disconn_cfm include/net/bluetooth/hci_core.h:1497 [inline] ffffffff8d2dc7c8 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_conn_hash_flush+0xda/0x260 net/bluetooth/hci_conn.c:1608 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:959 [inline] __mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104 hci_connect_cfm include/net/bluetooth/hci_core.h:1482 [inline] hci_remote_features_evt net/bluetooth/hci_event.c:3263 [inline] hci_event_packet+0x2f4d/0x7c50 net/bluetooth/hci_event.c:6240 hci_rx_work+0x4f8/0xd30 net/bluetooth/hci_core.c:5122 process_one_work+0x98d/0x1630 kernel/workqueue.c:2276 worker_thread+0x658/0x11f0 kernel/workqueue.c:2422 kthread+0x3e5/0x4d0 kernel/kthread.c:319 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 -> #1 (&hdev->lock){+.+.}-{3:3}: __mutex_lock_common kernel/locking/mutex.c:959 [inline] __mutex_lock+0x12a/0x10a0 kernel/locking/mutex.c:1104 sco_connect net/bluetooth/sco.c:245 [inline] sco_sock_connect+0x227/0xa10 net/bluetooth/sco.c:601 __sys_connect_file+0x155/0x1a0 net/socket.c:1879 __sys_connect+0x161/0x190 net/socket.c:1896 __do_sys_connect net/socket.c:1906 [inline] __se_sys_connect net/socket.c:1903 [inline] __x64_sys_connect+0x6f/0xb0 net/socket.c:1903 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3051 [inline] check_prevs_add kernel/locking/lockdep.c:3174 [inline] validate_chain kernel/locking/lockdep.c:3789 [inline] __lock_acquire+0x2a07/0x54a0 kernel/locking/lockdep.c:5015 lock_acquire kernel/locking/lockdep.c:5625 [inline] lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590 lock_sock_nested+0xca/0x120 net/core/sock.c:3170 lock_sock include/net/sock.h:1613 [inline] sco_conn_del+0x12a/0x2a0 net/bluetooth/sco.c:191 sco_disconn_cfm+0x71/0xb0 net/bluetooth/sco.c:1202 hci_disconn_cfm include/net/bluetooth/hci_core.h:1500 [inline] hci_conn_hash_flush+0x127/0x260 net/bluetooth/hci_conn.c:1608 hci_dev_do_close+0x528/0x1130 net/bluetooth/hci_core.c:1778 hci_unregister_dev+0x1c0/0x5a0 net/bluetooth/hci_core.c:4015 vhci_release+0x70/0xe0 drivers/bluetooth/hci_vhci.c:340 __fput+0x288/0x920 fs/file_table.c:280 task_work_run+0xdd/0x1a0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0xbd4/0x2a60 kernel/exit.c:825 do_group_exit+0x125/0x310 kernel/exit.c:922 get_signal+0x47f/0x2160 kernel/signal.c:2808 arch_do_signal_or_restart+0x2a9/0x1c40 arch/x86/kernel/signal.c:865 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x17d/0x290 kernel/entry/common.c:209 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline] syscall_exit_to_user_mode+0x19/0x60 kernel/entry/common.c:302 ret_from_fork+0x15/0x30 arch/x86/entry/entry_64.S:288 other info that might help us debug this: Chain exists of: sk_lock-AF_BLUETOOTH-BTPROTO_SCO --> &hdev->lock --> hci_cb_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hci_cb_list_lock); lock(&hdev->lock); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO); *** DEADLOCK *** The issue is that the lock hierarchy should go from &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO. For example, one such call trace is: hci_dev_do_close(): hci_dev_lock(); hci_conn_hash_flush(): hci_disconn_cfm(): mutex_lock(&hci_cb_list_lock); sco_disconn_cfm(): sco_conn_del(): lock_sock(sk); However, in sco_sock_connect, we call lock_sock before calling hci_dev_lock inside sco_connect, thus inverting the lock hierarchy. We fix this by pulling the call to hci_dev_lock out from sco_connect. Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-10Bluetooth: schedule SCO timeouts with delayed_workDesmond Cheong Zhi Xi1-6/+29
struct sock.sk_timer should be used as a sock cleanup timer. However, SCO uses it to implement sock timeouts. This causes issues because struct sock.sk_timer's callback is run in an IRQ context, and the timer callback function sco_sock_timeout takes a spin lock on the socket. However, other functions such as sco_conn_del and sco_conn_ready take the spin lock with interrupts enabled. This inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} lock usage could lead to deadlocks as reported by Syzbot [1]: CPU0 ---- lock(slock-AF_BLUETOOTH-BTPROTO_SCO); <Interrupt> lock(slock-AF_BLUETOOTH-BTPROTO_SCO); To fix this, we use delayed work to implement SCO sock timouts instead. This allows us to avoid taking the spin lock on the socket in an IRQ context, and corrects the misuse of struct sock.sk_timer. As a note, cancel_delayed_work is used instead of cancel_delayed_work_sync in sco_sock_set_timer and sco_sock_clear_timer to avoid a deadlock. In the future, the call to bh_lock_sock inside sco_sock_timeout should be changed to lock_sock to synchronize with other functions using lock_sock. However, since sco_sock_set_timer and sco_sock_clear_timer are sometimes called under the locked socket (in sco_connect and __sco_sock_close), cancel_delayed_work_sync might cause them to sleep until an sco_sock_timeout that has started finishes running. But sco_sock_timeout would also sleep until it can grab the lock_sock. Using cancel_delayed_work is fine because sco_sock_timeout does not change from run to run, hence there is no functional difference between: 1. waiting for a timeout to finish running before scheduling another timeout 2. scheduling another timeout while a timeout is running. Link: https://syzkaller.appspot.com/bug?id=9089d89de0502e120f234ca0fc8a703f7368b31e [1] Reported-by: syzbot+2f6d7c28bb4bf7e82060@syzkaller.appspotmail.com Tested-by: syzbot+2f6d7c28bb4bf7e82060@syzkaller.appspotmail.com Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-08-09Merge 5.14-rc5 into tty-nextGreg Kroah-Hartman3-24/+44
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-05Bluetooth: defer cleanup of resources in hci_unregister_dev()Tetsuo Handa3-24/+44
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to calling lock_sock() with rw spinlock held [1]. It seems that history of this locking problem is a trial and error. Commit b40df5743ee8 ("[PATCH] bluetooth: fix socket locking in hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock() as an attempt to fix lockdep warning. Then, commit 4ce61d1c7a8e ("[BLUETOOTH]: Fix locking in hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the sleep in atomic context warning. Then, commit 4b5dd696f81b ("Bluetooth: Remove local_bh_disable() from hci_sock.c") in 3.3-rc1 removed local_bh_disable(). Then, commit e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to lock_sock() as an attempt to fix CVE-2021-3573. This difficulty comes from current implementation that hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all references from sockets because hci_unregister_dev() immediately reclaims resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG). But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not doing what it should do. Therefore, instead of trying to detach sockets from device, let's accept not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG), by moving actual cleanup of resources from hci_unregister_dev() to hci_cleanup_dev() which is called by bt_host_release() when all references to this unregistered device (which is a kobject) are gone. Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets hci_pi(sk)->hdev, we need to check whether this device was unregistered and return an error based on HCI_UNREGISTER flag. There might be subtle behavioral difference in "monitor the hdev" functionality; please report if you found something went wrong due to this patch. Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1] Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: e305509e678b ("Bluetooth: use correct lock to prevent UAF of hdev object") Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-08-05Bluetooth: Add support hdev to allocate private dataTedd Ho-Jeong An1-3/+10
This patch adds support hdev to allocate extra size for private data. The size of private data is specified in the hdev_alloc_size(priv_size) and the allocated buffer can be accessed with hci_get_priv(hdev). Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-05Bluetooth: increase BTNAMSIZ to 21 chars to fix potential buffer overflowColin Ian King1-1/+1
An earlier commit replaced using batostr to using %pMR sprintf for the construction of session->name. Static analysis detected that this new method can use a total of 21 characters (including the trailing '\0') so we need to increase the BTNAMSIZ from 18 to 21 to fix potential buffer overflows. Addresses-Coverity: ("Out-of-bounds write") Fixes: fcb73338ed53 ("Bluetooth: Use %pMR in sprintf/seq_printf instead of batostr") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-03Bluetooth: Fix not generating RPA when requiredLuiz Augusto von Dentz2-56/+57
Code was checking if random_addr and hdev->rpa match without first checking if the RPA has not been set (BDADDR_ANY), furthermore it was clearing HCI_RPA_EXPIRED before the command completes and the RPA is actually programmed which in case of failure would leave the expired RPA still set. Since advertising instance have a similar problem the clearing of HCI_RPA_EXPIRED has been moved to hci_event.c after checking the random address is in fact the hdev->rap and then proceed to set the expire timeout. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-03Bluetooth: HCI: Add proper tracking for enable status of adv instancesLuiz Augusto von Dentz1-0/+28
This adds a field to track if advertising instances are enabled or not and only clear HCI_LE_ADV flag if there is no instance left advertising. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29Bluetooth: skip invalid hci_sync_conn_complete_evtDesmond Cheong Zhi Xi1-0/+15
Syzbot reported a corrupted list in kobject_add_internal [1]. This happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with status 0 are sent for the same HCI connection. This causes us to register the device more than once which corrupts the kset list. As this is forbidden behavior, we add a check for whether we're trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple times for one connection. If that's the case, the event is invalid, so we report an error that the device is misbehaving, and ignore the packet. Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1] Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-28Bluetooth: mgmt: Fix wrong opcode in the response for add_adv cmdTedd Ho-Jeong An1-1/+1
This patch fixes the MGMT add_advertising command repsones with the wrong opcode when it is trying to return the not supported error. Fixes: cbbdfa6f33198 ("Bluetooth: Enable controller RPA resolution using Experimental feature") Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-07-28Bluetooth: defer cleanup of resources in hci_unregister_dev()Tetsuo Handa3-16/+23
syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to calling lock_sock() with rw spinlock held [1]. It seems that history of this locking problem is a trial and error. Commit b40df5743ee8aed8 ("[PATCH] bluetooth: fix socket locking in hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to lock_sock() as an attempt to fix lockdep warning. Then, commit 4ce61d1c7a8ef4c1 ("[BLUETOOTH]: Fix locking in hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to local_bh_disable() + bh_lock_sock_nested() as an attempt to fix sleep in atomic context warning. Then, commit 4b5dd696f81b210c ("Bluetooth: Remove local_bh_disable() from hci_sock.c") in 3.3-rc1 removed local_bh_disable(). Then, commit e305509e678b3a4a ("Bluetooth: use correct lock to prevent UAF of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to lock_sock() as an attempt to fix CVE-2021-3573. This difficulty comes from current implementation that hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all references from sockets because hci_unregister_dev() immediately reclaims resources as soon as returning from hci_sock_dev_event(HCI_DEV_UNREG). But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not doing what it should do. Therefore, instead of trying to detach sockets from device, let's accept not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG), by moving actual cleanup of resources from hci_unregister_dev() to hci_release_dev() which is called by bt_host_release when all references to this unregistered device (which is a kobject) are gone. Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1] Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com> Fixes: e305509e678b3a4a ("Bluetooth: use correct lock to prevent UAF of hdev object") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-07-27tty: drop put_tty_driverJiri Slaby1-2/+2
put_tty_driver() is an alias for tty_driver_kref_put(). There is no need for two exported identical functions, therefore switch all users of old put_tty_driver() to new tty_driver_kref_put() and remove the former for good. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by: Alex Elder <elder@linaro.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-27tty: stop using alloc_tty_driverJiri Slaby1-4/+4
alloc_tty_driver was deprecated by tty_alloc_driver in commit 7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012. I never got into eliminating alloc_tty_driver until now. So we still have two functions for allocating drivers which might be confusing. So get rid of alloc_tty_driver uses to eliminate it for good in the next patch. Note we need to switch return value checking as tty_alloc_driver uses ERR_PTR. And flags are now a parameter of tty_alloc_driver. Cc: Richard Henderson <rth@twiddle.net>(odd fixer:ALPHA PORT) Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-22Bluetooth: sco: prevent information leak in sco_conn_defer_accept()Dan Carpenter1-0/+5
Smatch complains that some of these struct members are not initialized leading to a stack information disclosure: net/bluetooth/sco.c:778 sco_conn_defer_accept() warn: check that 'cp.retrans_effort' doesn't leak information This seems like a valid warning. I've added a default case to fix this issue. Fixes: 2f69a82acf6f ("Bluetooth: Use voice setting in deferred SCO connection request") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-05Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-06-26Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated eventLuiz Augusto von Dentz1-1/+12
Error status of this event means that it has ended due reasons other than a connection: 'If advertising has terminated as a result of the advertising duration elapsing, the Status parameter shall be set to the error code Advertising Timeout (0x3C).' 'If advertising has terminated because the Max_Extended_Advertising_Events was reached, the Status parameter shall be set to the error code Limit Reached (0x43).' Fixes: acf0aeae431a0 ("Bluetooth: Handle ADv set terminated event") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to recent changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-06-26Bluetooth: Fix Set Extended (Scan Response) DataLuiz Augusto von Dentz1-22/+29
These command do have variable length and the length can go up to 251, so this changes the struct to not use a fixed size and then when creating the PDU only the actual length of the data send to the controller. Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when filtering devicesArchie Pusaka7-110/+111
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: blacklist -> reject list whitelist -> accept list Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when tracking connectionsArchie Pusaka2-10/+11
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI role commentsArchie Pusaka4-11/+11
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator (for smp) or central (everything else) slave -> responder (for smp) or peripheral (everything else) The #define preprocessor terms are unchanged for now to not disturb dependent APIs. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: smp: Use the correct print formatKai Ye1-3/+3
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: sco: Use the correct print formatKai Ye1-4/+4
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: msft: Use the correct print formatKai Ye1-1/+1
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Use the correct print formatKai Ye2-10/+10
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: amp: Use the correct print formatKai Ye1-3/+3
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: a2mp: Use the correct print formatKai Ye1-12/+12
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: 6lowpan: Use the correct print formatKai Ye1-8/+8
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hidp: Use the correct print formatKai Ye1-3/+3
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: cmtp: Use the correct print formatKai Ye1-11/+11
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: bnep: Use the correct print formatKai Ye1-4/+4
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in commentsArchie Pusaka3-5/+5
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: slave -> peripheral blacklisted -> blocked Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in SMPArchie Pusaka3-40/+42
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator slave -> responder Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI LE featuresArchie Pusaka1-7/+7
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language to describe CPBArchie Pusaka2-9/+9
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced when describing the connectionless peripheral broadcast feature: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_validLuiz Augusto von Dentz1-0/+3
This fixes parsing of LTV entries when the length is 0. Found with: tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)" Add Advertising - Success (ScRsp only) - run Sending Add Advertising (0x003e) Test condition added, total 1 [ 11.004577] ================================================================== [ 11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0 [ 11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87 [ 11.006711] [ 11.007176] [ 11.007429] Allocated by task 87: [ 11.008151] [ 11.008438] The buggy address belongs to the object at ffff888002c69580 [ 11.008438] which belongs to the cache kmalloc-64 of size 64 [ 11.010526] The buggy address is located 48 bytes inside of [ 11.010526] 64-byte region [ffff888002c69580, ffff888002c695c0) [ 11.012423] The buggy address belongs to the page: [ 11.013291] [ 11.013544] Memory state around the buggy address: [ 11.014359] ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.015453] ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 11.017010] ^ [ 11.017547] ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 11.018296] ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.019116] ================================================================== Fixes: 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Fix the command returns garbage parameter valueTedd Ho-Jeong An1-0/+2
When the Get Device Flags command fails, it returns the error status with the parameters filled with the garbage values. Although the parameters are not used, it is better to fill with zero than the random values. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-05 20:46:31 +0000