summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2020-12-07Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added new commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Set missing suspend task bitsAbhishek Pandit-Subedi1-0/+8
When suspending, mark SUSPEND_SCAN_ENABLE and SUSPEND_SCAN_DISABLE tasks correctly when either classic or le scanning is modified. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Change MGMT security info CMD to be more genericDaniel Winkler1-14/+29
For advertising, we wish to know the LE tx power capabilities of the controller in userspace, so this patch edits the Security Info MGMT command to be more generic, such that other various controller capabilities can be included in the EIR data. This change also includes the LE min and max tx power into this newly-named command. The change was tested by manually verifying that the MGMT command returns the tx power range as expected in userspace. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Query LE tx power on startupDaniel Winkler2-0/+26
Queries tx power via HCI_LE_Read_Transmit_Power command when the hci device is initialized, and stores resulting min/max LE power in hdev struct. If command isn't available (< BT5 support), min/max values both default to HCI_TX_POWER_INVALID. This patch is manually verified by ensuring BT5 devices correctly query and receive controller tx power range. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Use intervals and tx power from mgmt cmdsDaniel Winkler3-15/+30
This patch takes the min/max intervals and tx power optionally provided in mgmt interface, stores them in the advertisement struct, and uses them when configuring the hci requests. While tx power is not used if extended advertising is unavailable, software rotation will use the min and max advertising intervals specified by the client. This change is validated manually by ensuring the min/max intervals are propagated to the controller on both hatch (extended advertising) and kukui (no extended advertising) chromebooks, and that tx power is propagated correctly on hatch. These tests are performed with multiple advertisements simultaneously. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Break add adv into two mgmt commandsDaniel Winkler2-11/+371
This patch adds support for the new advertising add interface, with the first command setting advertising parameters and the second to set advertising data. The set parameters command allows the caller to leave some fields "unset", with a params bitfield defining which params were purposefully set. Unset parameters will be given defaults when calling hci_add_adv_instance. The data passed to the param mgmt command is allowed to be flexible, so in the future if bluetoothd passes a larger structure with new params, the mgmt command will ignore the unknown members at the end. This change has been validated on both hatch (extended advertising) and kukui (no extended advertising) chromebooks running bluetoothd that support this new interface. I ran the following manual tests: - Set several (3) advertisements using modified test_advertisement.py - For each, validate correct data and parameters in btmon trace - Verified both for software rotation and extended adv Automatic test suite also run, testing many (25) scenarios of single and multi-advertising for data/parameter correctness. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Add helper to set adv dataDaniel Winkler1-0/+31
We wish to handle advertising data separately from advertising parameters in our new MGMT requests. This change adds a helper that allows the advertising data and scan response to be updated for an existing advertising instance. Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Add toggle to switch off interleave scanHoward Chung3-9/+36
This patch add a configurable parameter to switch off the interleave scan feature. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Refactor read default sys config for various typesHoward Chung1-56/+84
Refactor read default system configuration function so that it's capable of returning different types than u16 Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Handle active scan caseHoward Chung1-1/+3
This patch adds code to handle the active scan during interleave scan. The interleave scan will be canceled when users start active scan, and it will be restarted after active scan stopped. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Handle system suspend resume caseHoward Chung1-1/+3
This patch adds code to handle the system suspension during interleave scan. The interleave scan will be canceled when the system is going to sleep, and will be restarted after waking up. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Interleave with allowlist scanHoward Chung3-7/+134
This patch implements the interleaving between allowlist scan and no-filter scan. It'll be used to save power when at least one monitor is registered and at least one pending connection or one device to be scanned for. The durations of the allowlist scan and the no-filter scan are controlled by MGMT command: Set Default System Configuration. The default values are set randomly for now. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix attempting to set RPA timeout when unsupportedEdward Vear1-1/+1
During controller initialization, an LE Set RPA Timeout command is sent to the controller if supported. However, the value checked to determine if the command is supported is incorrect. Page 1921 of the Bluetooth Core Spec v5.2 shows that bit 2 of octet 35 of the Supported_Commands field corresponds to the LE Set RPA Timeout command, but currently bit 6 of octet 35 is checked. This patch checks the correct value instead. This issue led to the error seen in the following btmon output during initialization of an adapter (rtl8761b) and prevented initialization from completing. < HCI Command: LE Set Resolvable Private Address Timeout (0x08|0x002e) plen 2 Timeout: 900 seconds > HCI Event: Command Complete (0x0e) plen 4 LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 2 Status: Unsupported Remote Feature / Unsupported LMP Feature (0x1a) = Close Index: 00:E0:4C:6B:E5:03 The error did not appear when running with this patch. Signed-off-by: Edward Vear <edwardvear@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Rename get_adv_instance_scan_rspLuiz Augusto von Dentz1-23/+9
This renames get_adv_instance_scan_rsp to adv_instance_is_scannable and make it return a bool since it was not actually properly return the size of the scan response as one could expect. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix not sending Set Extended Scan ResponseLuiz Augusto von Dentz1-8/+6
Current code is actually failing on the following tests of mgmt-tester because get_adv_instance_scan_rsp_len did not account for flags that cause scan response data to be included resulting in non-scannable instance when in fact it should be scannable. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: Fix for Bluetooth SIG test L2CAP/COS/CFD/BV-14-CJimmy Wahlberg1-1/+1
This test case is meant to verify that multiple unknown options is included in the response. BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part A page 1057 'On an unknown option failure (Result=0x0003), the option(s) that contain anoption type field that is not understood by the recipient of the L2CAP_CONFIGURATION_REQ packet shall be included in the L2CAP_CONFIGURATION_RSP packet unless they are hints.' Before this patch: > ACL Data RX: Handle 11 flags 0x02 dlen 24 L2CAP: Configure Request (0x04) ident 18 len 16 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [mandatory] 10 00 11 02 11 00 12 02 12 00 < ACL Data TX: Handle 11 flags 0x00 dlen 17 L2CAP: Configure Response (0x05) ident 18 len 9 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) Option: Unknown (0x10) [mandatory] 12 After this patch: > ACL Data RX: Handle 11 flags 0x02 dlen 24 L2CAP: Configure Request (0x04) ident 5 len 16 Destination CID: 64 Flags: 0x0000 Option: Unknown (0x10) [mandatory] 10 00 11 02 11 00 12 02 12 00 < ACL Data TX: Handle 11 flags 0x00 dlen 23 L2CAP: Configure Response (0x05) ident 5 len 15 Source CID: 64 Flags: 0x0000 Result: Failure - unknown options (0x0003) Option: Unknown (0x10) [mandatory] 10 11 01 11 12 01 12 Signed-off-by: Jimmy Wahlberg <jimmywa@spotify.com> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: sco: Fix crash when using BT_SNDMTU/BT_RCVMTU optionWei Yongjun1-0/+5
This commit add the invalid check for connected socket, without it will causes the following crash due to sco_pi(sk)->conn being NULL: KASAN: null-ptr-deref in range [0x0000000000000050-0x0000000000000057] CPU: 3 PID: 4284 Comm: test_sco Not tainted 5.10.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:sco_sock_getsockopt+0x45d/0x8e0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ca 03 00 00 49 8b 9d f8 04 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 50 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e b5 03 00 00 8b 43 50 48 8b 0c RSP: 0018:ffff88801bb17d88 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83a4ecdf RDX: 000000000000000a RSI: ffffc90002fce000 RDI: 0000000000000050 RBP: 1ffff11003762fb4 R08: 0000000000000001 R09: ffff88810e1008c0 R10: ffffffffbd695dcf R11: fffffbfff7ad2bb9 R12: 0000000000000000 R13: ffff888018ff1000 R14: dffffc0000000000 R15: 000000000000000d FS: 00007fb4f76c1700(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555e3b7a938 CR3: 00000001117be001 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? sco_skb_put_cmsg+0x80/0x80 ? sco_skb_put_cmsg+0x80/0x80 __sys_getsockopt+0x12a/0x220 ? __ia32_sys_setsockopt+0x150/0x150 ? syscall_enter_from_user_mode+0x18/0x50 ? rcu_read_lock_bh_held+0xb0/0xb0 __x64_sys_getsockopt+0xba/0x150 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 0fc1a726f897 ("Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTU") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Luiz Augusto Von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-12-07Bluetooth: fix typo in struct nameReo Shiseki1-2/+2
Signed-off-by: Reo Shiseki <reoshiseki@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-11-11Bluetooth: Replace BT_DBG with bt_dev_dbg in HCI requestHoward Chung1-26/+26
This replaces the BT_DBG function to bt_dev_dbg as it is cleaner to show the controller index in the debug message. Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-11Bluetooth: consolidate error paths in hci_phy_link_complete_evt()Sergey Shtylyov1-10/+6
hci_phy_link_complete_evt() has several duplicate error paths -- consolidate them, using the *goto* statements. Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-11Bluetooth: Enforce key size of 16 bytes on FIPS levelArchie Pusaka1-1/+7
According to the spec Ver 5.2, Vol 3, Part C, Sec 5.2.2.8: Device in security mode 4 level 4 shall enforce: 128-bit equivalent strength for link and encryption keys required using FIPS approved algorithms (E0 not allowed, SAFER+ not allowed, and P-192 not allowed; encryption key not shortened) This patch rejects connection with key size below 16 for FIPS level services. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: hidp: use correct wait queue when removing ctrl_waitOle Bjørn Midtbø1-1/+1
A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2. list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4 Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]--- Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Move force_bredr_smp debugfs into hci_debugfs_create_bredrClaire Chang3-42/+54
Avoid multiple attempts to create the debugfs entry, force_bredr_smp, by moving it from the SMP registration to the BR/EDR controller init section. hci_debugfs_create_bredr is only called when HCI_SETUP and HCI_CONFIG is not set. Signed-off-by: Claire Chang <tientzu@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Fix: LL PRivacy BLE device fails to connectSathish Narasimman1-4/+8
When adding device to white list the device is added to resolving list also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set. HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices to resolving list. use_ll_privacy macro is used only to check if controller supports LL_Privacy. https://bugzilla.kernel.org/show_bug.cgi?id=209745 Fixes: 0eee35bdfa3b ("Bluetooth: Update resolving list when updating whitelist") Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Resume advertising after LE connectionDaniel Winkler3-7/+28
When an LE connection request is made, advertising is disabled and never resumed. When a client has an active advertisement, this is disruptive. This change adds resume logic for client-configured (non-directed) advertisements after the connection attempt. The patch was tested by registering an advertisement, initiating an LE connection from a remote peer, and verifying that the advertisement is re-activated after the connection is established. This is performed on Hatch and Kukui Chromebooks. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Fix slab-out-of-bounds read in hci_le_direct_adv_report_evt()Peilin Ye1-7/+5
`num_reports` is not being properly checked. A malformed event packet with a large `num_reports` number makes hci_le_direct_adv_report_evt() read out of bounds. Fix it. Cc: stable@vger.kernel.org Fixes: 2f010b55884e ("Bluetooth: Add support for handling LE Direct Advertising Report events") Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-11-09Bluetooth: Fix null pointer dereference in hci_event_packet()Anmol Karn1-0/+5
AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called from hci_event_packet() and there is a possibility, that hcon->amp_mgr may not be found when accessing after initialization of hcon. - net/bluetooth/hci_event.c:4945 The bug seems to get triggered in this line: bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon; Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status. Fixes: d5e911928bd8 ("Bluetooth: AMP: Process Physical Link Complete evt") Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f Signed-off-by: Anmol Karn <anmol.karan123@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-10-29Bluetooth: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+2
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.9-rc1/process/deprecated.html#zero-length-and-one-element-arrays Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-09-29Merge branch 'for-upstream' of ↵David S. Miller9-37/+292
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-09-29 Here's the main bluetooth-next pull request for 5.10: - Multiple fixes to suspend/resume handling - Added mgmt events for controller suspend/resume state - Improved extended advertising support - btintel: Enhanced support for next generation controllers - Added Qualcomm Bluetooth SoC WCN6855 support - Several other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25Bluetooth: MGMT: Fix not checking if BT_HS is enabledLuiz Augusto von Dentz1-1/+6
This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead of always reporting it as supported. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: Disable High Speed by defaultLuiz Augusto von Dentz1-1/+0
Bluetooth High Speed requires hardware support which is very uncommon nowadays since HS has not pickup interest by the industry. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: L2CAP: Fix calling sk_filter on non-socket based channelLuiz Augusto von Dentz2-3/+18
Only sockets will have the chan->data set to an actual sk, channels like A2MP would have its own data which would likely cause a crash when calling sk_filter, in order to fix this a new callback has been introduced so channels can implement their own filtering if necessary. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: A2MP: Fix not initializing all membersLuiz Augusto von Dentz1-1/+21
This fixes various places where a stack variable is used uninitialized. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-25Bluetooth: Fix update of own_addr_type if ll_privacy supportedSathish Narasimman1-1/+7
During system powercycle when trying to get the random address hci_get_random_address set own_addr_type as 0x01. In which if we enable ll_privacy it is supposed to be 0x03. Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-20Bluetooth: Fix auto-creation of hci_conn at Conn Complete eventSonny Sasaka1-6/+11
Currently the code auto-creates hci_conn only if the remote address has been discovered before. This may not be the case. For example, the remote device may trigger connection after reboot at already-paired state so there is no inquiry result found, but it is still correct to create the hci_conn when Connection Complete event is received. A better guard is to check against bredr allowlist. Devices in the allowlist have been given permission to auto-connect. Fixes: 4f40afc6c764 ("Bluetooth: Handle BR/EDR devices during suspend") Signed-off-by: Sonny Sasaka <sonnysasaka@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-20Bluetooth: Set scan parameters for ADV MonitorHoward Chung1-0/+3
Set scan parameters when there is at least one Advertisement monitor. Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-20Bluetooth: Update Adv monitor count upon removalMiao-chen Chou1-0/+2
This fixes the count of Adv monitor upon monitor removal. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-remove command on one console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-18net: bluetooth: delete duplicated wordsRandy Dunlap2-2/+2
Drop repeated words in net/bluetooth/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14Bluetooth: pause/resume advertising around suspendDaniel Winkler1-10/+57
Currently, the controller will continue advertising when the system enters suspend. This patch makes sure that all advertising instances are paused when entering suspend, and resumed when suspend exits. The Advertising and Suspend/Resume test suites were both run on this change on 4.19 kernel with both hardware offloaded multi-advertising and software rotated multi-advertising. In addition, a new test was added that performs the following steps: * Register 3 advertisements via bluez RegisterAdvertisement * Verify reception of all advertisements by remote peer * Enter suspend on DUT * Verify failure to receive all advertisements by remote peer * Exit suspend on DUT * Verify reception of all advertisements by remote peer Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Emit controller suspend and resume eventsAbhishek Pandit-Subedi2-1/+97
Emit controller suspend and resume events when we are ready for suspend and we've resumed from suspend. The controller suspend event will report whatever suspend state was successfully entered. The controller resume event will check the first HCI event that was received after we finished preparing for suspend and, if it was a connection event, store the address of the peer that caused the event. If it was not a connection event, we mark the wake reason as an unexpected event. Here is a sample btmon trace with these events: @ MGMT Event: Controller Suspended (0x002d) plen 1 Suspend state: Page scanning and/or passive scanning (2) @ MGMT Event: Controller Resumed (0x002e) plen 8 Wake reason: Remote wake due to peer device connection (2) LE Address: CD:F3:CD:13:C5:9A (OUI CD-F3-CD) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Add suspend reason for device disconnectAbhishek Pandit-Subedi1-0/+4
Update device disconnect event with reason 0x5 to indicate that device disconnected because the controller is suspending. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Add mgmt suspend and resume eventsAbhishek Pandit-Subedi1-0/+26
Add the controller suspend and resume events, which will signal when Bluetooth has completed preparing for suspend and when it's ready for resume. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Set ext scan response only when it existsAbhishek Pandit-Subedi1-2/+5
Only set extended scan response only when it exists. Otherwise, clear the scan response data. Per the core spec v5.2, Vol 4, Part E, 7.8.55 If the advertising set is non-scannable and the Host uses this command other than to discard existing data, the Controller shall return the error code Invalid HCI Command Parameters (0x12). On WCN3991, the controller correctly responds with Invalid Parameters when this is sent. That error causes __hci_req_hci_power_on to fail with -EINVAL and LE devices can't connect because background scanning isn't configured. Here is an hci trace of where this issue occurs during power on: < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 181.250 msec (0x0122) Max advertising interval: 181.250 msec (0x0122) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect... TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 9 dbm (0x09) < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 08:FD:55:ED:22:28 (OUI 08-FD-55) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd Status: Success (0x00) < HCI Command: LE Set Extended Scan Response Data (0x08|0x0038) plen 35 Handle: 0x00 Operation: Complete scan response data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x0d Name (short): Chromebook > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Response Data (0x08|0x0038) ncmd 1 Status: Invalid HCI Command Parameters (0x12) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Only mark socket zapped after unlockingAbhishek Pandit-Subedi1-3/+4
Since l2cap_sock_teardown_cb doesn't acquire the channel lock before setting the socket as zapped, it could potentially race with l2cap_sock_release which frees the socket. Thus, wait until the cleanup is complete before marking the socket as zapped. This race was reproduced on a JBL GO speaker after the remote device rejected L2CAP connection due to resource unavailability. Here is a dmesg log with debug logs from a repro of this bug: [ 3465.424086] Bluetooth: hci_core.c:hci_acldata_packet() hci0 len 16 handle 0x0003 flags 0x0002 [ 3465.424090] Bluetooth: hci_conn.c:hci_conn_enter_active_mode() hcon 00000000cfedd07d mode 0 [ 3465.424094] Bluetooth: l2cap_core.c:l2cap_recv_acldata() conn 000000007eae8952 len 16 flags 0x2 [ 3465.424098] Bluetooth: l2cap_core.c:l2cap_recv_frame() len 12, cid 0x0001 [ 3465.424102] Bluetooth: l2cap_core.c:l2cap_raw_recv() conn 000000007eae8952 [ 3465.424175] Bluetooth: l2cap_core.c:l2cap_sig_channel() code 0x03 len 8 id 0x0c [ 3465.424180] Bluetooth: l2cap_core.c:l2cap_connect_create_rsp() dcid 0x0045 scid 0x0000 result 0x02 status 0x00 [ 3465.424189] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 4 [ 3465.424196] Bluetooth: l2cap_core.c:l2cap_chan_del() chan 000000006acf9bff, conn 000000007eae8952, err 111, state BT_CONNECT [ 3465.424203] Bluetooth: l2cap_sock.c:l2cap_sock_teardown_cb() chan 000000006acf9bff state BT_CONNECT [ 3465.424221] Bluetooth: l2cap_core.c:l2cap_chan_put() chan 000000006acf9bff orig refcnt 3 [ 3465.424226] Bluetooth: hci_core.h:hci_conn_drop() hcon 00000000cfedd07d orig refcnt 6 [ 3465.424234] BUG: spinlock bad magic on CPU#2, kworker/u17:0/159 [ 3465.425626] Bluetooth: hci_sock.c:hci_sock_sendmsg() sock 000000002bb0cb64 sk 00000000a7964053 [ 3465.430330] lock: 0xffffff804410aac0, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 [ 3465.430332] Causing a watchdog bite! Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Add MGMT capability flags for tx power and ext advertisingDaniel Winkler1-0/+2
For new advertising features, it will be important for userspace to know the capabilities of the controller and kernel. If the controller and kernel support extended advertising, we include flags indicating hardware offloading support and support for setting tx power of adv instances. In the future, vendor-specific commands may allow the setting of tx power in advertising instances, but for now this feature is only marked available if extended advertising is supported. This change is manually verified in userspace by ensuring the advertising manager's supported_flags field is updated with new flags on hatch chromebook (ext advertising supported). Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Report num supported adv instances for hw offloadingDaniel Winkler2-4/+4
Here we make sure we properly report the number of supported advertising slots when we are using hardware offloading. If no hardware offloading is available, we default this value to HCI_MAX_ADV_INSTANCES for use in software rotation as before. This change has been tested on kukui (no ext adv) and hatch (ext adv) chromebooks by verifying "SupportedInstances" shows 5 (the default) and 6 (slots supported by controller), respectively. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: sco: new getsockopt options BT_SNDMTU/BT_RCVMTUJoseph Hwang1-0/+6
This patch defines new getsockopt options BT_SNDMTU/BT_RCVMTU for SCO socket to be compatible with other bluetooth sockets. These new options return the same value as option SCO_OPTIONS which is already present on existing kernels. Signed-off-by: Joseph Hwang <josephsih@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Re-order clearing suspend tasksAbhishek Pandit-Subedi1-1/+1
Unregister_pm_notifier is a blocking call so suspend tasks should be cleared beforehand. Otherwise, the notifier will wait for completion before returning (and we encounter a 2s timeout on resume). Fixes: 0e9952804ec9c8 (Bluetooth: Clear suspend tasks on unregister) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Fix memory leak in read_adv_mon_features()Peilin Ye1-4/+8
read_adv_mon_features() is leaking memory. Free `rp` before returning. Fixes: e5e1e7fd470c ("Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURES") Reported-and-tested-by: syzbot+f7f6e564f4202d8601c6@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f7f6e564f4202d8601c6 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-01Bluetooth: Clear suspend tasks on unregisterAbhishek Pandit-Subedi1-0/+11
While unregistering, make sure to clear the suspend tasks before cancelling the work. If the unregister is called during resume from suspend, this will unnecessarily add 2s to the resume time otherwise. Fixes: 4e8c36c3b0d73d (Bluetooth: Fix suspend notifier race) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>