summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2021-07-05Merge tag 'tty-5.14-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver patches for 5.14-rc1. A bit more than normal, but nothing major, lots of cleanups. Highlights are: - lots of tty api cleanups and mxser driver cleanups from Jiri - build warning fixes - various serial driver updates - coding style cleanups - various tty driver minor fixes and updates - removal of broken and disable r3964 line discipline (finally!) All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits) serial: mvebu-uart: remove unused member nb from struct mvebu_uart arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART dt-bindings: mvebu-uart: fix documentation serial: mvebu-uart: correctly calculate minimal possible baudrate serial: mvebu-uart: do not allow changing baudrate when uartclk is not available serial: mvebu-uart: fix calculation of clock divisor tty: make linux/tty_flip.h self-contained serial: Prefer unsigned int to bare use of unsigned serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs serial: qcom_geni_serial: use DT aliases according to DT bindings Revert "tty: serial: Add UART driver for Cortina-Access platform" tty: serial: Add UART driver for Cortina-Access platform MAINTAINERS: add me back as mxser maintainer mxser: Documentation, fix typos mxser: Documentation, make the docs up-to-date mxser: Documentation, remove traces of callout device mxser: introduce mxser_16550A_or_MUST helper mxser: rename flags to old_speed in mxser_set_serial_info mxser: use port variable in mxser_set_serial_info mxser: access info->MCR under info->slock ...
2021-06-26Bluetooth: Fix handling of HCI_LE_Advertising_Set_Terminated eventLuiz Augusto von Dentz1-1/+12
Error status of this event means that it has ended due reasons other than a connection: 'If advertising has terminated as a result of the advertising duration elapsing, the Status parameter shall be set to the error code Advertising Timeout (0x3C).' 'If advertising has terminated because the Max_Extended_Advertising_Events was reached, the Status parameter shall be set to the error code Limit Reached (0x43).' Fixes: acf0aeae431a0 ("Bluetooth: Handle ADv set terminated event") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to recent changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2021-06-26Bluetooth: Fix Set Extended (Scan Response) DataLuiz Augusto von Dentz1-22/+29
These command do have variable length and the length can go up to 251, so this changes the struct to not use a fixed size and then when creating the PDU only the actual length of the data send to the controller. Fixes: a0fb3726ba551 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when filtering devicesArchie Pusaka7-110/+111
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: blacklist -> reject list whitelist -> accept list Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language when tracking connectionsArchie Pusaka2-10/+11
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI role commentsArchie Pusaka4-11/+11
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator (for smp) or central (everything else) slave -> responder (for smp) or peripheral (everything else) The #define preprocessor terms are unchanged for now to not disturb dependent APIs. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: smp: Use the correct print formatKai Ye1-3/+3
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: sco: Use the correct print formatKai Ye1-4/+4
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: msft: Use the correct print formatKai Ye1-1/+1
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Use the correct print formatKai Ye2-10/+10
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: amp: Use the correct print formatKai Ye1-3/+3
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: a2mp: Use the correct print formatKai Ye1-12/+12
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: 6lowpan: Use the correct print formatKai Ye1-8/+8
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: hidp: Use the correct print formatKai Ye1-3/+3
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: cmtp: Use the correct print formatKai Ye1-11/+11
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: bnep: Use the correct print formatKai Ye1-4/+4
According to Documentation/core-api/printk-formats.rst, Use the correct print format. Printing an unsigned int value should use %u instead of %d. Otherwise printk() might end up displaying negative numbers. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in commentsArchie Pusaka3-5/+5
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: slave -> peripheral blacklisted -> blocked Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in SMPArchie Pusaka3-40/+42
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> initiator slave -> responder Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language in HCI LE featuresArchie Pusaka1-7/+7
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use inclusive language to describe CPBArchie Pusaka2-9/+9
This patch replaces some non-inclusive terms based on the appropriate language mapping table compiled by the Bluetooth SIG: https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf Specifically, these terms are replaced when describing the connectionless peripheral broadcast feature: master -> central slave -> peripheral Signed-off-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Fix slab-out-of-bounds in tlv_data_is_validLuiz Augusto von Dentz1-0/+3
This fixes parsing of LTV entries when the length is 0. Found with: tools/mgmt-tester -s "Add Advertising - Success (ScRsp only)" Add Advertising - Success (ScRsp only) - run Sending Add Advertising (0x003e) Test condition added, total 1 [ 11.004577] ================================================================== [ 11.005292] BUG: KASAN: slab-out-of-bounds in tlv_data_is_valid+0x87/0xe0 [ 11.005984] Read of size 1 at addr ffff888002c695b0 by task mgmt-tester/87 [ 11.006711] [ 11.007176] [ 11.007429] Allocated by task 87: [ 11.008151] [ 11.008438] The buggy address belongs to the object at ffff888002c69580 [ 11.008438] which belongs to the cache kmalloc-64 of size 64 [ 11.010526] The buggy address is located 48 bytes inside of [ 11.010526] 64-byte region [ffff888002c69580, ffff888002c695c0) [ 11.012423] The buggy address belongs to the page: [ 11.013291] [ 11.013544] Memory state around the buggy address: [ 11.014359] ffff888002c69480: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.015453] ffff888002c69500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.016232] >ffff888002c69580: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 11.017010] ^ [ 11.017547] ffff888002c69600: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 11.018296] ffff888002c69680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 11.019116] ================================================================== Fixes: 2bb36870e8cb2 ("Bluetooth: Unify advertising instance flags check") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: mgmt: Fix the command returns garbage parameter valueTedd Ho-Jeong An1-0/+2
When the Get Device Flags command fails, it returns the error status with the parameters filled with the garbage values. Although the parameters are not used, it is better to fill with zero than the random values. Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: disable filter dup when scan for adv monitorYun-Hao Chung1-5/+41
Disable duplicates filter when scanning for advertisement monitor for the following reasons. The scanning includes active scan and passive scan. For HW pattern filtering (ex. MSFT), Realtek and Qualcomm controllers ignore RSSI_Sampling_Period when the duplicates filter is enabled. For SW pattern filtering, when we're not doing interleaved scanning, it is necessary to disable duplicates filter, otherwise hosts can only receive one advertisement and it's impossible to know if a peer is still in range. Signed-off-by: Yun-Hao Chung <howardchung@chromium.org> Reviewed-by: Archie Pusaka <apusaka@chromium.org> Reviewed-by: Manish Mandlik <mmandlik@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Translate additional address type during le_conn_compSathish Narasimman1-0/+17
When using controller based address resolution, then the destination address type during le_conn_complete uses 0x02 & 0x03 if controller resolves the destination address(RPA). These address types need to be converted back into either 0x00 0r 0x01 Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: RFCOMM: Use DEVICE_ATTR_RO macroYueHaibing1-4/+6
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: L2CAP: Fix invalid access on ECRED Connection responseLuiz Augusto von Dentz1-2/+2
The use of l2cap_chan_del is not safe under a loop using list_for_each_entry. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: L2CAP: Fix invalid access if ECRED Reconfigure failsLuiz Augusto von Dentz1-2/+2
The use of l2cap_chan_del is not safe under a loop using list_for_each_entry. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Remove spurious error messageSzymon Janc1-9/+5
Even with rate limited reporting this is very spammy and since it is remote device that is providing bogus data there is no need to report this as error. Since real_len variable was used only to allow conditional error message it is now also removed. [72454.143336] bt_err_ratelimited: 10 callbacks suppressed [72454.143337] Bluetooth: hci0: advertising data len corrected [72454.296314] Bluetooth: hci0: advertising data len corrected [72454.892329] Bluetooth: hci0: advertising data len corrected [72455.051319] Bluetooth: hci0: advertising data len corrected [72455.357326] Bluetooth: hci0: advertising data len corrected [72455.663295] Bluetooth: hci0: advertising data len corrected [72455.787278] Bluetooth: hci0: advertising data len corrected [72455.942278] Bluetooth: hci0: advertising data len corrected [72456.094276] Bluetooth: hci0: advertising data len corrected [72456.249137] Bluetooth: hci0: advertising data len corrected [72459.416333] bt_err_ratelimited: 13 callbacks suppressed [72459.416334] Bluetooth: hci0: advertising data len corrected [72459.721334] Bluetooth: hci0: advertising data len corrected [72460.011317] Bluetooth: hci0: advertising data len corrected [72460.327171] Bluetooth: hci0: advertising data len corrected [72460.638294] Bluetooth: hci0: advertising data len corrected [72460.946350] Bluetooth: hci0: advertising data len corrected [72461.225320] Bluetooth: hci0: advertising data len corrected [72461.690322] Bluetooth: hci0: advertising data len corrected [72462.118318] Bluetooth: hci0: advertising data len corrected [72462.427319] Bluetooth: hci0: advertising data len corrected [72464.546319] bt_err_ratelimited: 7 callbacks suppressed [72464.546319] Bluetooth: hci0: advertising data len corrected [72464.857318] Bluetooth: hci0: advertising data len corrected [72465.163332] Bluetooth: hci0: advertising data len corrected [72465.278331] Bluetooth: hci0: advertising data len corrected [72465.432323] Bluetooth: hci0: advertising data len corrected [72465.891334] Bluetooth: hci0: advertising data len corrected [72466.045334] Bluetooth: hci0: advertising data len corrected [72466.197321] Bluetooth: hci0: advertising data len corrected [72466.340318] Bluetooth: hci0: advertising data len corrected [72466.498335] Bluetooth: hci0: advertising data len corrected [72469.803299] bt_err_ratelimited: 10 callbacks suppressed Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=203753 Cc: stable@vger.kernel.org Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Shutdown controller after workqueues are flushed or cancelledKai-Heng Feng1-8/+8
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working: [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110) Or kernel panics because other workqueues already freed skb: [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ #20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Fix alt settings for incoming SCO with transparent coding formatKiran K1-3/+3
For incoming SCO connection with transparent coding format, alt setting of CVSD is getting applied instead of Transparent. Before fix: < HCI Command: Accept Synchron.. (0x01|0x0029) plen 21 #2196 [hci0] 321.342548 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #2197 [hci0] 321.343585 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #2198 [hci0] 321.351666 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) ........ > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2336 [hci0] 321.383655 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2337 [hci0] 321.389558 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2338 [hci0] 321.393615 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2339 [hci0] 321.393618 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2340 [hci0] 321.393618 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2341 [hci0] 321.397070 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2342 [hci0] 321.403622 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2343 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2344 [hci0] 321.403625 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2345 [hci0] 321.403625 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2346 [hci0] 321.404569 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2347 [hci0] 321.412091 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2348 [hci0] 321.413626 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2349 [hci0] 321.413630 > SCO Data RX: Handle 257 flags 0x00 dlen 48 #2350 [hci0] 321.413630 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #2351 [hci0] 321.419674 After fix: < HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21 #309 [hci0] 49.439693 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x003f HV1 may be used HV2 may be used HV3 may be used EV3 may be used EV4 may be used EV5 may be used > HCI Event: Command Status (0x0f) plen 4 #310 [hci0] 49.440308 Accept Synchronous Connection Request (0x01|0x0029) ncmd 1 Status: Success (0x00) > HCI Event: Synchronous Connect Complete (0x2c) plen 17 #311 [hci0] 49.449308 Status: Success (0x00) Handle: 257 Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd) Link type: eSCO (0x02) Transmission interval: 0x0c Retransmission window: 0x04 RX packet length: 60 TX packet length: 60 Air mode: Transparent (0x03) < SCO Data TX: Handle 257 flags 0x00 dlen 60 #312 [hci0] 49.450421 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #313 [hci0] 49.457927 > HCI Event: Max Slots Change (0x1b) plen 3 #314 [hci0] 49.460345 Handle: 256 Max slots: 5 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #315 [hci0] 49.465453 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #316 [hci0] 49.470502 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #317 [hci0] 49.470519 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #318 [hci0] 49.472996 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #319 [hci0] 49.480412 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #320 [hci0] 49.480492 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #321 [hci0] 49.487989 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #322 [hci0] 49.490303 < SCO Data TX: Handle 257 flags 0x00 dlen 60 #323 [hci0] 49.495496 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #324 [hci0] 49.500304 > SCO Data RX: Handle 257 flags 0x00 dlen 60 #325 [hci0] 49.500311 Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Lokendra Singh <lokendra.singh@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: 6lowpan: remove unused functionJiapeng Chong1-36/+0
Fix the following clang warning: net/bluetooth/6lowpan.c:913:20: warning: unused function 'bdaddr_type' [-Wunused-function]. net/bluetooth/6lowpan.c:106:35: warning: unused function 'peer_lookup_ba' [-Wunused-function]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Add ncmd=0 recovery handlingManish Mandlik2-10/+41
During command status or command complete event, the controller may set ncmd=0 indicating that it is not accepting any more commands. In such a case, host holds off sending any more commands to the controller. If the controller doesn't recover from such condition, host will wait forever, until the user decides that the Bluetooth is broken and may power cycles the Bluetooth. This patch triggers the hardware error to reset the controller and driver when it gets into such state as there is no other wat out. Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Fix the HCI to MGMT status conversion tableYu Liu1-0/+3
0x2B, 0x31 and 0x33 are reserved for future use but were not present in the HCI to MGMT conversion table, this caused the conversion to be incorrect for the HCI status code greater than 0x2A. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Yu Liu <yudiliu@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: cmtp: fix file refcount when cmtp_attach_device failsThadeu Lima de Souza Cascardo1-0/+5
When cmtp_attach_device fails, cmtp_add_connection returns the error value which leads to the caller to doing fput through sockfd_put. But cmtp_session kthread, which is stopped in this path will also call fput, leading to a potential refcount underflow or a use-after-free. Add a refcount before we signal the kthread to stop. The kthread will try to grab the cmtp_session_sem mutex before doing the fput, which is held when get_file is called, so there should be no races there. Reported-by: Ryota Shiga Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: Return whether a connection is outboundYu Liu3-6/+10
When an MGMT_EV_DEVICE_CONNECTED event is reported back to the user space we will set the flags to tell if the established connection is outbound or not. This is useful for the user space to log better metrics and error messages. Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Yu Liu <yudiliu@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: use flexible-array member instead of zero-length arrayQiheng Lin1-3/+3
Fix the following coccicheck warning: net/bluetooth/msft.c:37:6-13: WARNING use flexible-array member instead net/bluetooth/msft.c:42:6-10: WARNING use flexible-array member instead net/bluetooth/msft.c:52:6-10: WARNING use flexible-array member instead Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-26Bluetooth: 6lowpan: delete unneeded variable initializationKai Ye1-1/+1
Delete unneeded variable initialization. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+3
Trivial conflicts in net/can/isotp.c and tools/testing/selftests/net/mptcp/mptcp_connect.sh scaled_ppm_to_ppb() was moved from drivers/ptp/ptp_clock.c to include/linux/ptp_clock_kernel.h in -next so re-apply the fix there. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-14Bluetooth: SMP: Fix crash when receiving new connection when debug is enabledLuiz Augusto von Dentz1-3/+3
When receiving a new connection pchan->conn won't be initialized so the code cannot use bt_dev_dbg as the pointer to hci_dev won't be accessible. Fixes: 2e1614f7d61e4 ("Bluetooth: SMP: Convert BT_ERR/BT_DBG to bt_dev_err/bt_dev_dbg") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-06-14Merge tag 'v5.13-rc6' into tty-nextGreg Kroah-Hartman2-3/+8
We want the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-07Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-3/+8
Bug fixes overlapping feature additions and refactoring, mostly. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-02Bluetooth: Fix spelling mistakesZheng Yongjun6-13/+13
Fix some spelling mistakes in comments: udpate ==> update retreive ==> retrieve accidentially ==> accidentally correspondig ==> corresponding adddress ==> address estabilish ==> establish commplete ==> complete Unkown ==> Unknown triggerd ==> triggered transtion ==> transition Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-31Bluetooth: use correct lock to prevent UAF of hdev objectLin Ma1-2/+2
The hci_sock_dev_event() function will cleanup the hdev object for sockets even if this object may still be in used within the hci_sock_bound_ioctl() function, result in UAF vulnerability. This patch replace the BH context lock to serialize these affairs and prevent the race condition. Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-05-27Bluetooth: fix the erroneous flush_work() orderLin Ma1-1/+6
In the cleanup routine for failed initialization of HCI device, the flush_work(&hdev->rx_work) need to be finished before the flush_work(&hdev->cmd_work). Otherwise, the hci_rx_work() can possibly invoke new cmd_work and cause a bug, like double free, in late processings. This was assigned CVE-2021-3564. This patch reorder the flush_work() to fix this bug. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Hao Xiong <mart1n@zju.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-05-13tty: make tty_operations::chars_in_buffer return uintJiri Slaby1-1/+1
tty_operations::chars_in_buffer is another hook which is expected to return values >= 0. So make it explicit by the return type too -- use unsigned int. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-27-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_operations::write_room return uintJiri Slaby1-1/+1
Line disciplines expect a positive value or zero returned from tty->ops->write_room (invoked by tty_write_room). So make this assumption explicit by using unsigned int as a return value. Both of tty->ops->write_room and tty_write_room. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Alex Elder <elder@linaro.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> # xtensa Acked-by: David Sterba <dsterba@suse.com> Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Chris Zankel <chris@zankel.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Link: https://lore.kernel.org/r/20210505091928.22010-23-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-29Merge tag 'net-next-5.13' of ↵Linus Torvalds17-123/+286
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ...
2021-04-27Fix misc new gcc warningsLinus Torvalds1-1/+1
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably "-Wstringop-overread" and "-Warray-parameter". Both of them cause what seem to be valid warnings in the kernel, where we have array size mismatches in function arguments (that are no longer just silently converted to a pointer to element, but actually checked). This fixes most of the trivial ones, by making the function declaration match the function definition, and in the case of intel_pm.c, removing the over-specified array size from the argument declaration. At least one 'stringop-overread' warning remains in the i915 driver, but that one doesn't have the same obvious trivial fix, and may or may not actually be indicative of a bug. [ It was a mistake to upgrade one of my machines to Fedora 34 while being busy with the merge window, but if this is the extent of the compiler upgrade problems, things are better than usual - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-26Merge tag 'char-misc-5.13-rc1' of ↵Linus Torvalds1-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of various smaller driver subsystem updates for 5.13-rc1. Major bits in here are: - habanalabs driver updates - hwtracing driver updates - interconnect driver updates - mhi driver updates - extcon driver updates - fpga driver updates - new binder features added - nvmem driver updates - phy driver updates - soundwire driver updates - smaller misc and char driver fixes and updates. - bluetooth driver bugfix that maintainer wanted to go through this tree. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits) bluetooth: eliminate the potential race condition when removing the HCI controller coresight: etm-perf: Fix define build issue when built as module phy: Revert "phy: ti: j721e-wiz: add missing of_node_put" phy: ti: j721e-wiz: Add missing include linux/slab.h phy: phy-twl4030-usb: Fix possible use-after-free in twl4030_usb_remove() stm class: Use correct UUID APIs intel_th: pci: Add Alder Lake-M support intel_th: pci: Add Rocket Lake CPU support intel_th: Consistency and off-by-one fix intel_th: Constify attribute_group structs intel_th: Constify all drvdata references stm class: Remove an unused function habanalabs/gaudi: Fix uninitialized return code rc when read size is zero greybus: es2: fix kernel-doc warnings mei: me: add Alder Lake P device id. dw-xdata-pcie: Update outdated info and improve text format dw-xdata-pcie: Fix documentation build warns fbdev: zero-fill colormap in fbcmap.c firmware: qcom-scm: Fix QCOM_SCM configuration speakup: i18n: Switch to kmemdup_nul() in spk_msg_set() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 01:53:28 +0000