summaryrefslogtreecommitdiffstats
path: root/net/bluetooth
AgeCommit message (Collapse)AuthorFilesLines
2016-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds9-14/+194
Pull networking updates from David Miller: "Highlights: 1) Support more Realtek wireless chips, from Jes Sorenson. 2) New BPF types for per-cpu hash and arrap maps, from Alexei Starovoitov. 3) Make several TCP sysctls per-namespace, from Nikolay Borisov. 4) Allow the use of SO_REUSEPORT in order to do per-thread processing of incoming TCP/UDP connections. The muxing can be done using a BPF program which hashes the incoming packet. From Craig Gallek. 5) Add a multiplexer for TCP streams, to provide a messaged based interface. BPF programs can be used to determine the message boundaries. From Tom Herbert. 6) Add 802.1AE MACSEC support, from Sabrina Dubroca. 7) Avoid factorial complexity when taking down an inetdev interface with lots of configured addresses. We were doing things like traversing the entire address less for each address removed, and flushing the entire netfilter conntrack table for every address as well. 8) Add and use SKB bulk free infrastructure, from Jesper Brouer. 9) Allow offloading u32 classifiers to hardware, and implement for ixgbe, from John Fastabend. 10) Allow configuring IRQ coalescing parameters on a per-queue basis, from Kan Liang. 11) Extend ethtool so that larger link mode masks can be supported. From David Decotigny. 12) Introduce devlink, which can be used to configure port link types (ethernet vs Infiniband, etc.), port splitting, and switch device level attributes as a whole. From Jiri Pirko. 13) Hardware offload support for flower classifiers, from Amir Vadai. 14) Add "Local Checksum Offload". Basically, for a tunneled packet the checksum of the outer header is 'constant' (because with the checksum field filled into the inner protocol header, the payload of the outer frame checksums to 'zero'), and we can take advantage of that in various ways. From Edward Cree" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits) bonding: fix bond_get_stats() net: bcmgenet: fix dma api length mismatch net/mlx4_core: Fix backward compatibility on VFs phy: mdio-thunder: Fix some Kconfig typos lan78xx: add ndo_get_stats64 lan78xx: handle statistics counter rollover RDS: TCP: Remove unused constant RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket net: smc911x: convert pxa dma to dmaengine team: remove duplicate set of flag IFF_MULTICAST bonding: remove duplicate set of flag IFF_MULTICAST net: fix a comment typo ethernet: micrel: fix some error codes ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it bpf, dst: add and use dst_tclassid helper bpf: make skb->tc_classid also readable net: mvneta: bm: clarify dependencies cls_bpf: reset class and reuse major in da ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c ldmvsw: Add ldmvsw.c driver code ...
2016-03-17Merge branch 'linus' of ↵Linus Torvalds1-72/+63
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "Here is the crypto update for 4.6: API: - Convert remaining crypto_hash users to shash or ahash, also convert blkcipher/ablkcipher users to skcipher. - Remove crypto_hash interface. - Remove crypto_pcomp interface. - Add crypto engine for async cipher drivers. - Add akcipher documentation. - Add skcipher documentation. Algorithms: - Rename crypto/crc32 to avoid name clash with lib/crc32. - Fix bug in keywrap where we zero the wrong pointer. Drivers: - Support T5/M5, T7/M7 SPARC CPUs in n2 hwrng driver. - Add PIC32 hwrng driver. - Support BCM6368 in bcm63xx hwrng driver. - Pack structs for 32-bit compat users in qat. - Use crypto engine in omap-aes. - Add support for sama5d2x SoCs in atmel-sha. - Make atmel-sha available again. - Make sahara hashing available again. - Make ccp hashing available again. - Make sha1-mb available again. - Add support for multiple devices in ccp. - Improve DMA performance in caam. - Add hashing support to rockchip" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (116 commits) crypto: qat - remove redundant arbiter configuration crypto: ux500 - fix checks of error code returned by devm_ioremap_resource() crypto: atmel - fix checks of error code returned by devm_ioremap_resource() crypto: qat - Change the definition of icp_qat_uof_regtype hwrng: exynos - use __maybe_unused to hide pm functions crypto: ccp - Add abstraction for device-specific calls crypto: ccp - CCP versioning support crypto: ccp - Support for multiple CCPs crypto: ccp - Remove check for x86 family and model crypto: ccp - memset request context to zero during import lib/mpi: use "static inline" instead of "extern inline" lib/mpi: avoid assembler warning hwrng: bcm63xx - fix non device tree compatibility crypto: testmgr - allow rfc3686 aes-ctr variants in fips mode. crypto: qat - The AE id should be less than the maximal AE number lib/mpi: Endianness fix crypto: rockchip - add hash support for crypto engine in rk3288 crypto: xts - fix compile errors crypto: doc - add skcipher API documentation crypto: doc - update AEAD AD handling ...
2016-03-11Bluetooth: Fix potential buffer overflow with Add AdvertisingJohan Hedberg1-0/+4
The Add Advertising command handler does the appropriate checks for the AD and Scan Response data, however fails to take into account the general length of the mgmt command itself, which could lead to potential buffer overflows. This patch adds the necessary check that the mgmt command length is consistent with the given ad and scan_rsp lengths. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2016-03-11Bluetooth: Fix setting correct flags in ADJohan Hedberg1-1/+3
A recent change added MGMT_ADV_FLAG_DISCOV to the flags returned by get_adv_instance_flags(), however failed to take into account limited discoverable mode. This patch fixes the issue by setting the correct discoverability flag in the AD data. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Increment management interface revisionJohan Hedberg1-1/+1
Increment the mgmt revision due to the recently added limited privacy mode. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Add support for limited privacy modeJohan Hedberg4-11/+75
Introduce a limited privacy mode indicated by value 0x02 to the mgmt Set Privacy command. With value 0x02 the kernel will use privacy mode with a resolvable private address. In case the controller is bondable and discoverable the identity address will be used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Fix adding discoverable to adv instance flagsJohan Hedberg1-0/+3
When lookup up the advertising instance flags for the default advertising instance (0) the discoverable flag should be filled in based on the HCI_DISCOVERABLE flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10Bluetooth: Move memset closer to where it's neededJohan Hedberg1-2/+2
Minor fix to not do the memset until the variable it clears is actually used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: hci_core: cancel power off delayed work properlyWei-Ning Huang1-0/+1
When the HCI_AUTO_OFF flag is cleared, the power_off delayed work need to be cancel or HCI will be powered off even if it's managed. Signed-off-by: Wei-Ning Huang <wnhuang@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: Use managed version of led_trigger_register in LED triggerHeiner Kallweit3-11/+1
Recently a managed version of led_trigger_register was introduced. Using devm_led_trigger_register allows to simplify the LED trigger code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-23Bluetooth: add LED trigger for indicating HCI is powered upHeiner Kallweit5-0/+116
Add support for LED triggers to the Bluetooth subsystem and add kernel config symbol BT_LEDS for it. For now one trigger for indicating "HCI is powered up" is supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-02-20Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skbDouglas Anderson1-2/+4
In commit 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") we squashed down the size of the structure by using a union with the assumption that all users would use the flag to determine whether we had a req_complete or a req_complete_skb. Unfortunately we had a case in hci_req_cmd_complete() where we weren't looking at the flag. This can result in a situation where we might be storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or vice versa. During some testing I found at least one case where the function hci_req_sync_complete() was called improperly because the kernel thought that it didn't require an SKB. Looking through the stack in kgdb I found that it was called by hci_event_packet() and that hci_event_packet() had both of its locals "req_complete" and "req_complete_skb" pointing to the same place: both to hci_req_sync_complete(). Let's make sure we always check the flag. For more details on debugging done, see <http://crbug.com/588288>. Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29Bluetooth: Fix incorrect removing of IRKsJohan Hedberg2-26/+18
The commit cad20c278085d893ebd616cd20c0747a8e9d53c7 was supposed to fix handling of devices first using public addresses and then switching to RPAs after pairing. Unfortunately it missed a couple of key places in the code. 1. When evaluating which devices should be removed from the existing white list we also need to consider whether we have an IRK for them or not, i.e. a call to hci_find_irk_by_addr() is needed. 2. In smp_notify_keys() we should not be requiring the knowledge of the RPA, but should simply keep the IRK around if the other conditions require it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.4+
2016-01-29Bluetooth: L2CAP: Fix setting chan src info before adding PSM/CIDJohan Hedberg1-3/+3
At least the l2cap_add_psm() routine depends on the source address type being properly set to know what auto-allocation ranges to use, so the assignment to l2cap_chan needs to happen before this. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29Bluetooth: L2CAP: Fix auto-allocating LE PSM valuesJohan Hedberg1-2/+12
The LE dynamic PSM range is different from BR/EDR (0x0080 - 0x00ff) and doesn't have requirements relating to parity, so separate checks are needed. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-29Bluetooth: L2CAP: Introduce proper defines for PSM rangesJohan Hedberg1-3/+3
Having proper defines makes the code a bit readable, it also avoids duplicating hard-coded values since these are also needed when auto-allocating PSM values (in a subsequent patch). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-27Bluetooth: Use skcipher and hashHerbert Xu1-72/+63
This patch replaces uses of blkcipher with skcipher and the long obsolete hash interface with shash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-23Bluetooth: 6lowpan: Fix handling of uncompressed IPv6 packetsLukasz Duda1-0/+3
This patch fixes incorrect handling of the 6lowpan packets that contain uncompressed IPv6 header. RFC4944 specifies a special dispatch for 6lowpan to carry uncompressed IPv6 header. This dispatch (1 byte long) has to be removed during reception and skb data pointer has to be moved. To correctly point in the beginning of the IPv6 header the dispatch byte has to be pulled off before packet can be processed by netif_rx_in(). Test scenario: IPv6 packets are not correctly interpreted by the network layer when IPv6 header is not compressed (e.g. ICMPv6 Echo Reply is not propagated correctly to the ICMPv6 layer because the extra byte will make the header look corrupted). Similar approach is done for IEEE 802.15.4. Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org # 4.4+
2016-01-23Bluetooth: 6lowpan: Fix kernel NULL pointer dereferencesGlenn Ruben Bakke1-1/+3
The fixes provided in this patch assigns a valid net_device structure to skb before dispatching it for further processing. Scenario #1: ============ Bluetooth 6lowpan receives an uncompressed IPv6 header, and dispatches it to netif. The following error occurs: Null pointer dereference error #1 crash log: [ 845.854013] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 845.855785] IP: [<ffffffff816e3d36>] enqueue_to_backlog+0x56/0x240 ... [ 845.909459] Call Trace: [ 845.911678] [<ffffffff816e3f64>] netif_rx_internal+0x44/0xf0 The first modification fixes the NULL pointer dereference error by assigning dev to the local_skb in order to set a valid net_device before processing the skb by netif_rx_ni(). Scenario #2: ============ Bluetooth 6lowpan receives an UDP compressed message which needs further decompression by nhc_udp. The following error occurs: Null pointer dereference error #2 crash log: [ 63.295149] BUG: unable to handle kernel NULL pointer dereference at 0000000000000840 [ 63.295931] IP: [<ffffffffc0559540>] udp_uncompress+0x320/0x626 [nhc_udp] The second modification fixes the NULL pointer dereference error by assigning dev to the local_skb in the case of a udp compressed packet. The 6lowpan udp_uncompress function expects that the net_device is set in the skb when checking lltype. Signed-off-by: Glenn Ruben Bakke <glenn.ruben.bakke@nordicsemi.no> Signed-off-by: Lukasz Duda <lukasz.duda@nordicsemi.no> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org # 4.4+
2016-01-06Bluetooth: avoid rebuilding hci_sock all the timeJohannes Berg1-9/+18
Instead, allow using string formatting with send_monitor_note() and access init_utsname(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Add support for Start Limited Discovery commandJohan Hedberg2-12/+52
This patch implements the mgmt Start Limited Discovery command. Most of existing Start Discovery code is reused since the only difference is the presence of a 'limited' flag as part of the discovery state. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05Bluetooth: Change eir_has_data_type() to more generic eir_get_data()Johan Hedberg2-4/+5
To make the EIR parsing helper more general purpose, make it return the found data and its length rather than just saying whether the data was present or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-20Bluetooth: use list_for_each_entry*Geliang Tang4-49/+25
Use list_for_each_entry*() instead of list_for_each*() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-15bluetooth: Validate socket address length in sco_sock_bind().David S. Miller1-0/+3
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-11Bluetooth: Do not filter multicast addresses by defaultDanny Schweizer1-2/+5
A Linux PC is connected with another device over Bluetooth PAN using a BNEP interface. Whenever a packet is tried to be sent over the BNEP interface, the function "bnep_net_xmit()" in "net/bluetooth/bnep/netdev.c" is called. This function calls "bnep_net_mc_filter()", which checks (if the destination address is multicast) if the address is set in a certain multicast filter (&s->mc_filter). If it is not, then it is not sent out. This filter is only changed in two other functions, found in net/bluetooth/bnep/core.c": in "bnep_ctrl_set_mc_filter()", which is only called if a message of type "BNEP_FILTER_MULTI_ADDR_SET" is received. Otherwise, it is set in "bnep_add_connection()", where it is set to a default value which only adds the broadcast address to the filter: set_bit(bnep_mc_hash(dev->broadcast), (ulong *) &s->mc_filter); To sum up, if the BNEP interface does not receive any message of type "BNEP_FILTER_MULTI_ADDR_SET", it will not send out any messages with multicast destination addresses except for broadcast. However, in the BNEP specification (page 27 in http://grouper.ieee.org/groups/802/15/Bluetooth/BNEP.pdf), it is said that per default, all multicast addresses should not be filtered, i.e. the BNEP interface should be able to send packets with any multicast destination address. It seems that the default case is wrong: the multicast filter should not block almost all multicast addresses, but should not filter out any. This leads to the problem that e.g. Neighbor Solicitation messages sent with Bluetooth PAN over the BNEP interface to a multicast destination address other than broadcast are blocked and not sent out. Therefore, in the default case, we set the mc_filter to ~0LL to not filter out any multicast addresses. Signed-off-by: Danny Schweizer <danny.schweizer@proofnet.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-106lowpan: add lowpan dev register helpersAlexander Aring1-5/+3
This patch introduces register and unregister functionality for lowpan interfaces. While register a lowpan interface there are several things which need to be initialize by the 6lowpan subsystem. Upcoming functionality need to register/unregister per interface components e.g. debugfs entry. Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Fix locking in bt_accept_dequeue after disconnectionYichen Zhao1-1/+1
Fix a crash that may happen when bt_accept_dequeue is run after a Bluetooth connection has been disconnected. bt_accept_unlink was called after release_sock, permitting bt_accept_unlink to run twice on the same socket and cause a NULL pointer dereference. [50510.241632] BUG: unable to handle kernel NULL pointer dereference at 00000000000001a8 [50510.241694] IP: [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth] [50510.241759] PGD 0 [50510.241776] Oops: 0002 [#1] SMP [50510.241802] Modules linked in: rtl8192cu rtl_usb rtlwifi rtl8192c_common 8021q garp stp mrp llc rfcomm bnep nls_iso8859_1 intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp arc4 ath9k ath9k_common ath9k_hw ath kvm eeepc_wmi asus_wmi mac80211 snd_hda_codec_hdmi snd_hda_codec_realtek sparse_keymap crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_controller cfg80211 snd_hda_codec i915 snd_hwdep snd_pcm ghash_clmulni_intel snd_timer snd soundcore serio_raw cryptd drm_kms_helper drm i2c_algo_bit shpchp ath3k mei_me lpc_ich btusb bluetooth 6lowpan_iphc mei lp parport wmi video mac_hid psmouse ahci libahci r8169 mii [50510.242279] CPU: 0 PID: 934 Comm: krfcommd Not tainted 3.16.0-49-generic #65~14.04.1-Ubuntu [50510.242327] Hardware name: ASUSTeK Computer INC. VM40B/VM40B, BIOS 1501 12/09/2014 [50510.242370] task: ffff8800d9068a30 ti: ffff8800d7a54000 task.ti: ffff8800d7a54000 [50510.242413] RIP: 0010:[<ffffffffc01243f7>] [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth] [50510.242480] RSP: 0018:ffff8800d7a57d58 EFLAGS: 00010246 [50510.242511] RAX: 0000000000000000 RBX: ffff880119bb8c00 RCX: ffff880119bb8eb0 [50510.242552] RDX: ffff880119bb8eb0 RSI: 00000000fffffe01 RDI: ffff880119bb8c00 [50510.242592] RBP: ffff8800d7a57d60 R08: 0000000000000283 R09: 0000000000000001 [50510.242633] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800d8da9eb0 [50510.242673] R13: ffff8800d74fdb80 R14: ffff880119bb8c00 R15: ffff8800d8da9c00 [50510.242715] FS: 0000000000000000(0000) GS:ffff88011fa00000(0000) knlGS:0000000000000000 [50510.242761] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [50510.242794] CR2: 00000000000001a8 CR3: 0000000001c13000 CR4: 00000000001407f0 [50510.242835] Stack: [50510.242849] ffff880119bb8eb0 ffff8800d7a57da0 ffffffffc0124506 ffff8800d8da9eb0 [50510.242899] ffff8800d8da9c00 ffff8800d9068a30 0000000000000000 ffff8800d74fdb80 [50510.242949] ffff8800d6f85208 ffff8800d7a57e08 ffffffffc0159985 000000000000001f [50510.242999] Call Trace: [50510.243027] [<ffffffffc0124506>] bt_accept_dequeue+0xb6/0x180 [bluetooth] [50510.243085] [<ffffffffc0159985>] l2cap_sock_accept+0x125/0x220 [bluetooth] [50510.243128] [<ffffffff810a1b30>] ? wake_up_state+0x20/0x20 [50510.243163] [<ffffffff8164946e>] kernel_accept+0x4e/0xa0 [50510.243200] [<ffffffffc05b97cd>] rfcomm_run+0x1ad/0x890 [rfcomm] [50510.243238] [<ffffffffc05b9620>] ? rfcomm_process_rx+0x8a0/0x8a0 [rfcomm] [50510.243281] [<ffffffff81091572>] kthread+0xd2/0xf0 [50510.243312] [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0 [50510.243353] [<ffffffff8176e9d8>] ret_from_fork+0x58/0x90 [50510.243387] [<ffffffff810914a0>] ? kthread_create_on_node+0x1c0/0x1c0 [50510.243424] Code: 00 48 8b 93 b8 02 00 00 48 8d 83 b0 02 00 00 48 89 51 08 48 89 0a 48 89 83 b0 02 00 00 48 89 83 b8 02 00 00 48 8b 83 c0 02 00 00 <66> 83 a8 a8 01 00 00 01 48 c7 83 c0 02 00 00 00 00 00 00 f0 ff [50510.243685] RIP [<ffffffffc01243f7>] bt_accept_unlink+0x47/0xa0 [bluetooth] [50510.243737] RSP <ffff8800d7a57d58> [50510.243758] CR2: 00000000000001a8 [50510.249457] ---[ end trace bb984f932c4e3ab3 ]--- Signed-off-by: Yichen Zhao <zhaoyichen@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Don't treat connection timeout as a failureJohan Hedberg1-2/+10
When we're doing background scanning and connection attempts it's possible we timeout trying to connect and go back to scanning again. The timeout triggers a HCI_LE_Create_Connection_Cancel which will trigger a Connection Complete with "Unknown Connection Identifier" error status. Since we go back to scanning this isn't really a failure and shouldn't be presented as such to user space through mgmt. The exception to this is if the connection attempt was due to an explicit request on an L2CAP socket (indicated by params->explicit_connect being true). Since the socket will get an error it's consistent to also notify the failure on mgmt in this case. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Use continuous scanning when creating LE connectionsJohan Hedberg1-1/+5
All LE connections are now triggered through a preceding passive scan and waiting for a connectable advertising report. This means we've got the best possible guarantee that the device is within range and should be able to request the controller to perform continuous scanning. This way we minimize the risk that we miss out on any advertising packets. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.3+
2015-12-10Bluetooth: Clean up current advertising instance trackingJohan Hedberg4-66/+32
We can simplify a lot of code by making sure hdev->cur_adv_instance is always up-to-date. This allows e.g. the removal of the get_current_adv_instance() helper function and the special HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00 explicit in the various calls where advertising instances aren't enabled, e.g. when HCI_ADVERTISING is set or we've just finished enabling LE. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Clean up advertising initialization in powered_update_hci()Johan Hedberg1-18/+12
The logic in powered_update_hci() to initialize the advertising data & state is a bit more complicated than it needs to be. It was previously not doing anything if HCI_LE_ENABLED wasn't set, but this was not obvious by quickly looking at the code. Now the conditions for the various actions are more explicit. Another simplification is due to the fact that __hci_req_schedule_adv_instance() takes care of setting hdev->cur_adv_instance so there's no need to set it before calling the function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Remove redundant check for req.cmd_qJohan Hedberg1-2/+1
The hci_req_run() function already checks for empty cmd_q and bails out if necessary. Also, req.cmd_q should really be treated as private data of the request and not accessed directly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Fix updating wrong instance's scan_rsp dataJohan Hedberg1-1/+1
The __hci_req_update_scan_rsp_data gets the instance to be updated which should get passed to update_inst_scan_rsp_data() instead of always enabling the current instance. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Remove unnecessary HCI_ADVERTISING_INSTANCE flagJohan Hedberg2-18/+9
This flag just tells us whether hdev->adv_instances is empty or not. We can equally well use the list_empty() function to get this information. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Simplify read_adv_features codeJohan Hedberg1-20/+8
The code in the Read Advertising Features mgmt command handler is unnecessarily complicated. Clean it up and remove unnecessary variables & branches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform HCI update for power on synchronouslyJohan Hedberg4-133/+126
The request to update HCI during power on is always coming either from hdev->req_workqueue or through an ioctl, so it's safe to use hci_req_sync for it. This way we also eliminate potential races with incoming mgmt commands or other actions while powering on. Part of this refactoring is the splitting of mgmt_powered() into mgmt_power_on() and __mgmt_power_off() functions. The main reason is the different requirements as far as hdev locking is concerned, as highlighted with the __ prefix of the power off API. Since the power on in the case of clearing the AUTO_OFF flag cannot be done synchronously in the set_powered mgmt handler, the hci_power_on work callback is extended to cover this (which also simplifies the set_powered helper a lot). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move fast connectable code to hci_request.cJohan Hedberg3-39/+40
We'll soon need this both in hci_request.c and mgmt.c so move it to hci_request.c as a generic helper. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move EIR update to hci_request.cJohan Hedberg3-195/+198
We'll soon need to update the EIR both from hci_request.c and mgmt.c so move update_eir() as a more generic request helper to hci_request.c. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: HCI name update to hci_request.cJohan Hedberg3-12/+14
We'll soon need this both from hci_request.c and mgmt.c so move it as a request helper function to hci_request.c. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable timeout behind hdev->req_workqueueJohan Hedberg3-52/+28
Since the other discoverable changes are behind req_workqueue now it only makes sense to move the discoverable timeout there as well. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move discoverable changes to hdev->req_workqueueJohan Hedberg2-77/+77
The discoverable mode is intrinsically linked with the connectable mode e.g. through sharing the same HCI command (Write Scan Enable) for BR/EDR. It makes therefore sense to move it to hci_request.c and run the changes through the same hdev->req_workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Perform Class of Device changes through hdev->req_workqueueJohan Hedberg3-47/+49
The Class of Device needs to be changed e.g. for limited discoverable mode. In preparation of moving the discoverable mode to hci_request.c and hdev->req_workqueue, move the Class of Device helpers there first. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move connectable changes to hdev->req_workqueueJohan Hedberg2-74/+51
This way the connectable changes are synchronized against each other, which helps avoid potential races. The connectable mode is also linked together with LE advertising which makes is more convenient to have it behind the same workqueue. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move advertising instance management to hci_request.cJohan Hedberg6-563/+583
This paves the way for eventually performing advertising changes through the hdev->req_workqueue. Some new APIs need to be exposed from mgmt.c to hci_request.c and vice-versa, but many of them will go away once hdev->req_workqueue gets used. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Move __hci_update_background_scan up in hci_request.cJohan Hedberg1-73/+73
This way we avoid the need to do a forward declaration in later patches. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10Bluetooth: Run page scan updates through hdev->req_workqueueJohan Hedberg4-21/+34
Since Add/Remove Device perform the page scan updates independently from the HCI command completion we've introduced a potential race when multiple mgmt commands are queued. Doing the page scan updates through the req_workqueue ensures that the state changes are performed in a race-free manner. At the same time, to make the request helper more widely usable, extend it to also cover Inquiry Scan changes since those are behind the same HCI command. This is also reflected in the new name of the API as well as the work struct name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-4/+9
Conflicts: drivers/net/ethernet/renesas/ravb_main.c kernel/bpf/syscall.c net/ipv4/ipmr.c All three conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-03Merge branch 'for-upstream' of ↵David S. Miller1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2015-12-01 Here's a Bluetooth fix for the 4.4-rc series that fixes a memory leak of the Security Manager L2CAP channel that'll happen for every LE connection. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet1-3/+3
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>