summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/rfcomm/sock.c
AgeCommit message (Collapse)AuthorFilesLines
2021-09-21Bluetooth: Fix passing NULL to PTR_ERRLuiz Augusto von Dentz1-1/+1
Passing NULL to PTR_ERR will result in 0 (success), also since the likes of bt_skb_sendmsg does never return NULL it is safe to replace the instances of IS_ERR_OR_NULL with IS_ERR when checking its return. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-09-13Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsgLuiz Augusto von Dentz1-36/+10
This makes use of bt_skb_sendmmsg instead using memcpy_from_msg which is not considered safe to be used when lock_sock is held. Also make rfcomm_dlc_send handle skb with fragments and queue them all atomically. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-08-10Bluetooth: switch to lock_sock in RFCOMMDesmond Cheong Zhi Xi1-4/+4
Other than rfcomm_sk_state_change and rfcomm_connect_ind, functions in RFCOMM use lock_sock to lock the socket. Since bh_lock_sock and spin_lock_bh do not provide synchronization with lock_sock, these calls should be changed to lock_sock. This is now safe to do because packet processing is now done in a workqueue instead of a tasklet, so bh_lock_sock/spin_lock_bh are no longer necessary to synchronise between user contexts and SOFTIRQ processing. Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2020-07-31Merge branch 'for-upstream' of ↵David S. Miller1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-07-31 Here's the main bluetooth-next pull request for 5.9: - Fix firmware filenames for Marvell chipsets - Several suspend-related fixes - Addedd mgmt commands for runtime configuration - Multiple fixes for Qualcomm-based controllers - Add new monitoring feature for mgmt - Fix handling of legacy cipher (E4) together with security level 4 - Add support for Realtek 8822CE controller - Fix issues with Chinese controllers using fake VID/PID values - Multiple other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-5/+7
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-10Bluetooth: RFCOMM: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29Bluetooth: Acquire sk_lock.slock without disabling interruptsSebastian Andrzej Siewior1-5/+2
There was a lockdep which led to commit fad003b6c8e3d ("Bluetooth: Fix inconsistent lock state with RFCOMM") Lockdep noticed that `sk->sk_lock.slock' was acquired without disabling the softirq while the lock was also used in softirq context. Unfortunately the solution back then was to disable interrupts before acquiring the lock which however made lockdep happy. It would have been enough to simply disable the softirq. Disabling interrupts before acquiring a spinlock_t is not allowed on PREEMPT_RT because these locks are converted to 'sleeping' spinlocks. Use spin_lock_bh() in order to acquire the `sk_lock.slock'. Reported-by: Luis Claudio R. Goncalves <lclaudio@uudg.org> Reported-by: kbuild test robot <lkp@intel.com> [missing unlock] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-23compat_ioctl: move rfcomm handlers into driverArnd Bergmann1-2/+12
All these ioctl commands are compatible, so we can handle them with a trivial wrapper in rfcomm/sock.c and remove the listing in fs/compat_ioctl.c. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-04-19net: rework SIOCGSTAMP ioctl handlingArnd Bergmann1-0/+1
The SIOCGSTAMP/SIOCGSTAMPNS ioctl commands are implemented by many socket protocol handlers, and all of those end up calling the same sock_get_timestamp()/sock_get_timestampns() helper functions, which results in a lot of duplicate code. With the introduction of 64-bit time_t on 32-bit architectures, this gets worse, as we then need four different ioctl commands in each socket protocol implementation. To simplify that, let's add a new .gettstamp() operation in struct proto_ops, and move ioctl implementation into the common sock_ioctl()/compat_sock_ioctl_trans() functions that these all go through. We can reuse the sock_get_timestamp() implementation, but generalize it so it can deal with both native and compat mode, as well as timeval and timespec structures. Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/lkml/CAK8P3a038aDQQotzua_QtKGhq8O9n+rdiz2=WDCp82ys8eUT+A@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22Bluetooth: Fix locking in bt_accept_enqueue() for BH contextMatthias Kaehlcke1-1/+1
With commit e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") lock_sock[_nested]() is used to acquire the socket lock before manipulating the socket. lock_sock[_nested]() may block, which is problematic since bt_accept_enqueue() can be called in bottom half context (e.g. from rfcomm_connect_ind()): [<ffffff80080d81ec>] __might_sleep+0x4c/0x80 [<ffffff800876c7b0>] lock_sock_nested+0x24/0x58 [<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth] [<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm] Add a parameter to bt_accept_enqueue() to indicate whether the function is called from BH context, and acquire the socket lock with bh_lock_sock_nested() if that's the case. Also adapt all callers of bt_accept_enqueue() to pass the new parameter: - l2cap_sock_new_connection_cb() - uses lock_sock() to lock the parent socket => process context - rfcomm_connect_ind() - acquires the parent socket lock with bh_lock_sock() => BH context - __sco_chan_add() - called from sco_chan_add(), which is called from sco_connect(). parent is NULL, hence bt_accept_enqueue() isn't called in this code path and we can ignore it - also called from sco_conn_ready(). uses bh_lock_sock() to acquire the parent lock => BH context Fixes: e16337622016 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2018-12-19Bluetooth: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-11/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-1/+1
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-26net/bluetooth: convert to ->poll_maskChristoph Hellwig1-1/+1
Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-04-01Bluetooth: Mark expected switch fall-throughsGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-02-12net: make getname() functions return length rather than use int* parameterDenys Vlasenko1-3/+2
Changes since v1: Added changes in these files: drivers/infiniband/hw/usnic/usnic_transport.c drivers/staging/lustre/lnet/lnet/lib-socket.c drivers/target/iscsi/iscsi_target_login.c drivers/vhost/net.c fs/dlm/lowcomms.c fs/ocfs2/cluster/tcp.c security/tomoyo/network.c Before: All these functions either return a negative error indicator, or store length of sockaddr into "int *socklen" parameter and return zero on success. "int *socklen" parameter is awkward. For example, if caller does not care, it still needs to provide on-stack storage for the value it does not need. None of the many FOO_getname() functions of various protocols ever used old value of *socklen. They always just overwrite it. This change drops this parameter, and makes all these functions, on success, return length of sockaddr. It's always >= 0 and can be differentiated from an error. Tests in callers are changed from "if (err)" to "if (err < 0)", where needed. rpc_sockname() lost "int buflen" parameter, since its only use was to be passed to kernel_getsockname() as &buflen and subsequently not used in any way. Userspace API is not changed. text data bss dec hex filename 30108430 2633624 873672 33615726 200ef6e vmlinux.before.o 30108109 2633612 873672 33615393 200ee21 vmlinux.o Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-bluetooth@vger.kernel.org CC: linux-decnet-user@lists.sourceforge.net CC: linux-wireless@vger.kernel.org CC: linux-rdma@vger.kernel.org CC: linux-sctp@vger.kernel.org CC: linux-nfs@vger.kernel.org CC: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01Merge branch 'for-upstream' of ↵David S. Miller1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-07-01 Here are some more Bluetooth patches for the 4.13 kernel: - Added support for Broadcom BCM43430 controllers - Added sockaddr length checks before accessing sa_family - Fixed possible "might sleep" errors in bnep, cmtp and hidp modules - A few other minor fixes Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_refcnt from atomic_t to refcount_tReshetova, Elena1-1/+1
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. This patch uses refcount_inc_not_zero() instead of atomic_inc_not_zero_hint() due to absense of a _hint() version of refcount API. If the hint() version must be used, we might need to revisit API. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29Bluetooth: Add sockaddr length checks before accessing sa_family in bind and ↵Mateusz Jurczyk1-1/+2
connect handlers Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in bind() and connect() handlers of the Bluetooth sockets. Since neither syscall enforces a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing sa_family. Signed-off-by: Mateusz Jurczyk <mjurczyk@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-03-09net: Work around lockdep limitation in sockets that use socketsDavid Howells1-1/+2
Lockdep issues a circular dependency warning when AFS issues an operation through AF_RXRPC from a context in which the VFS/VM holds the mmap_sem. The theory lockdep comes up with is as follows: (1) If the pagefault handler decides it needs to read pages from AFS, it calls AFS with mmap_sem held and AFS begins an AF_RXRPC call, but creating a call requires the socket lock: mmap_sem must be taken before sk_lock-AF_RXRPC (2) afs_open_socket() opens an AF_RXRPC socket and binds it. rxrpc_bind() binds the underlying UDP socket whilst holding its socket lock. inet_bind() takes its own socket lock: sk_lock-AF_RXRPC must be taken before sk_lock-AF_INET (3) Reading from a TCP socket into a userspace buffer might cause a fault and thus cause the kernel to take the mmap_sem, but the TCP socket is locked whilst doing this: sk_lock-AF_INET must be taken before mmap_sem However, lockdep's theory is wrong in this instance because it deals only with lock classes and not individual locks. The AF_INET lock in (2) isn't really equivalent to the AF_INET lock in (3) as the former deals with a socket entirely internal to the kernel that never sees userspace. This is a limitation in the design of lockdep. Fix the general case by: (1) Double up all the locking keys used in sockets so that one set are used if the socket is created by userspace and the other set is used if the socket is created by the kernel. (2) Store the kern parameter passed to sk_alloc() in a variable in the sock struct (sk_kern_sock). This informs sock_lock_init(), sock_init_data() and sk_clone_lock() as to the lock keys to be used. Note that the child created by sk_clone_lock() inherits the parent's kern setting. (3) Add a 'kern' parameter to ->accept() that is analogous to the one passed in to ->create() that distinguishes whether kernel_accept() or sys_accept4() was the caller and can be passed to sk_alloc(). Note that a lot of accept functions merely dequeue an already allocated socket. I haven't touched these as the new socket already exists before we get the parameter. Note also that there are a couple of places where I've made the accepted socket unconditionally kernel-based: irda_accept() rds_rcp_accept_one() tcp_accept_from_sock() because they follow a sock_create_kern() and accept off of that. Whilst creating this, I noticed that lustre and ocfs don't create sockets through sock_create_kern() and thus they aren't marked as for-kernel, though they appear to be internal. I wonder if these should do that so that they use the new set of lock keys. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+1
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-06Bluetooth: Fix potential NULL dereference in RFCOMM bind callbackJaganath Kanakkassery1-8/+12
addr can be NULL and it should not be dereferenced before NULL checking. Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-11net: Pass kern from net_proto_family.create to sk_allocEric W. Biederman1-4/+4
In preparation for changing how struct net is refcounted on kernel sockets pass the knowledge that we are creating a kernel socket from sock_create_kern through to sk_alloc. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue1-5/+5
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23Bluetooth: Fix nested sleepsPeter Hurley1-5/+4
l2cap/rfcomm/sco_sock_accept() are wait loops which may acquire sleeping locks. Since both wait loops and sleeping locks use task_struct.state to sleep and wake, the nested sleeping locks destroy the wait loop state. Use the newly-minted wait_woken() and DEFINE_WAIT_FUNC() for the wait loop. DEFINE_WAIT_FUNC() allows an alternate wake function to be specified; in this case, the predefined scheduler function, woken_wake_function(). This wait construct ensures wakeups will not be missed without requiring the wait loop to set the task state before condition evaluation. How this works: CPU 0 | CPU 1 | | is <condition> set? | no set <condition> | | wake_up_interruptible | woken_wake_function | set WQ_FLAG_WOKEN | try_to_wake_up | | wait_woken | set TASK_INTERRUPTIBLE | WQ_FLAG_WOKEN? yes | set TASK_RUNNING | | - loop - | | is <condition> set? | yes - exit wait loop Fixes "do not call blocking ops when !TASK_RUNNING" warnings in l2cap_sock_accept(), rfcomm_sock_accept() and sco_sock_accept(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-01-12Bluetooth: Add BUILD_BUG_ON for size of struct sockaddr_rcMarcel Holtmann1-0/+2
This adds an extra check for ensuring that the size of sockaddr_rc does not grow larger than sockaddr. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-11-24new helper: memcpy_from_msg()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-07-17Bluetooth: never linger on process exitVladimir Davydov1-1/+2
If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller1-2/+2
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26Bluetooth: Fix returning peer address in pending connect stateJohan Hedberg1-1/+2
We should let user space request the peer address also in the pending connect states, i.e. BT_CONNECT and BT_CONNECT2. There is existing user space code that tries to do this and will fail without extending the set of allowed states for the peer address information. This patch adds the two states to the allowed ones in the L2CAP and RFCOMM sock_getname functions, thereby preventing ENOTCONN from being returned. Reported-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-20Bluetooth: Fix channel check when binding RFCOMM sockAndrzej Kaczmarek1-6/+12
When binding RFCOMM socket with non-zero channel we're checking if there is already any other socket which has the same channel number assigned and then fail. This check does not consider situation where we have another socket connected to remote device on given channel number in which case we still should be able to bind local socket. This patch changes __rfcomm_get_sock_by_addr() to return only sockets in either BT_BOUND or BT_LISTEN states, also name is updated to better describe what this function does now. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Refuse peer RFCOMM address reading when not connectedJohan Hedberg1-0/+3
When we're not connected the peer address information is undefined. This patch fixes the remote address getting to return a proper error in case the sate is anything else than BT_CONNECTED. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Handle security level 4 for RFCOMM connectionsMarcel Holtmann1-1/+11
With the introduction of security level 4, the RFCOMM sockets need to be made aware of this new level. This change ensures that the pairing requirements are set correctly for these connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-11-21Merge branch 'master' of ↵John W. Linville1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-11-20net: rework recvmsg handler msg_name and msg_namelen logicHannes Frederic Sowa1-1/+0
This patch now always passes msg->msg_namelen as 0. recvmsg handlers must set msg_namelen to the proper size <= sizeof(struct sockaddr_storage) to return msg_name to the user. This prevents numerous uninitialized memory leaks we had in the recvmsg handlers and makes it harder for new code to accidentally leak uninitialized memory. Optimize for the case recvfrom is called with NULL as address. We don't need to copy the address at all, so set it to NULL before invoking the recvmsg handler. We can do so, because all the recvmsg handlers must cope with the case a plain read() is called on them. read() also sets msg_name to NULL. Also document these changes in include/linux/net.h as suggested by David Miller. Changes since RFC: Set msg->msg_name = NULL if user specified a NULL in msg_name but had a non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't affect sendto as it would bail out earlier while trying to copy-in the address. It also more naturally reflects the logic by the callers of verify_iovec. With this change in place I could remove " if (!uaddr || msg_sys->msg_namelen == 0) msg->msg_name = NULL ". This change does not alter the user visible error logic as we ignore msg_namelen as long as msg_name is NULL. Also remove two unnecessary curly brackets in ___sys_recvmsg and change comments to netdev style. Cc: David Miller <davem@davemloft.net> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-15Merge branch 'for-upstream' of ↵John W. Linville1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2013-11-13Bluetooth: Fix issue with RFCOMM getsockopt operationMarcel Holtmann1-1/+5
The commit 94a86df01082557e2de45865e538d7fb6c46231c seem to have uncovered a long standing bug that did not trigger so far. BUG: unable to handle kernel paging request at 00000009dd503502 IP: [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 PGD 0 Oops: 0000 [#1] SMP Modules linked in: ath5k ath mac80211 cfg80211 CPU: 2 PID: 1459 Comm: bluetoothd Not tainted 3.11.0-133163-gcebd830 #2 Hardware name: System manufacturer System Product Name/P6T DELUXE V2, BIOS 1202 12/22/2010 task: ffff8803304106a0 ti: ffff88033046a000 task.ti: ffff88033046a000 RIP: 0010:[<ffffffff815b1868>] [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP: 0018:ffff88033046bed8 EFLAGS: 00010246 RAX: 00000009dd503502 RBX: 0000000000000003 RCX: 00007fffa2ed5548 RDX: 0000000000000003 RSI: 0000000000000012 RDI: ffff88032fd37480 RBP: ffff88033046bf28 R08: 00007fffa2ed554c R09: ffff88032f5707d8 R10: 00007fffa2ed5548 R11: 0000000000000202 R12: ffff880330bbd000 R13: 00007fffa2ed5548 R14: 0000000000000003 R15: 00007fffa2ed554c FS: 00007fc44cfac700(0000) GS:ffff88033fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000009dd503502 CR3: 00000003304c2000 CR4: 00000000000007e0 Stack: ffff88033046bf28 ffffffff815b0f2f ffff88033046bf18 0002ffff81105ef6 0000000600000000 ffff88032fd37480 0000000000000012 00007fffa2ed5548 0000000000000003 00007fffa2ed554c ffff88033046bf78 ffffffff814c0380 Call Trace: [<ffffffff815b0f2f>] ? rfcomm_sock_setsockopt+0x5f/0x190 [<ffffffff814c0380>] SyS_getsockopt+0x60/0xb0 [<ffffffff815e0852>] system_call_fastpath+0x16/0x1b Code: 02 00 00 00 0f 47 d0 4c 89 ef e8 74 13 cd ff 83 f8 01 19 c9 f7 d1 83 e1 f2 e9 4b ff ff ff 0f 1f 44 00 00 49 8b 84 24 70 02 00 00 <4c> 8b 30 4c 89 c0 e8 2d 19 cd ff 85 c0 49 89 d7 b9 f2 ff ff ff RIP [<ffffffff815b1868>] rfcomm_sock_getsockopt+0x128/0x200 RSP <ffff88033046bed8> CR2: 00000009dd503502 It triggers in the following segment of the code: 0x1313 is in rfcomm_sock_getsockopt (net/bluetooth/rfcomm/sock.c:743). 738 739 static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __user *optval, int __user *optlen) 740 { 741 struct sock *sk = sock->sk; 742 struct rfcomm_conninfo cinfo; 743 struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; 744 int len, err = 0; 745 u32 opt; 746 747 BT_DBG("sk %p", sk); The l2cap_pi(sk) is wrong here since it should have been rfcomm_pi(sk), but that socket of course does not contain the low-level connection details requested here. Tracking down the actual offending commit, it seems that this has been introduced when doing some L2CAP refactoring: commit 8c1d787be4b62d2d1b6f04953eca4bcf7c839d44 Author: Gustavo F. Padovan <padovan@profusion.mobi> Date: Wed Apr 13 20:23:55 2011 -0300 @@ -743,6 +743,7 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u struct sock *sk = sock->sk; struct sock *l2cap_sk; struct rfcomm_conninfo cinfo; + struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn; int len, err = 0; u32 opt; @@ -787,8 +788,8 @@ static int rfcomm_sock_getsockopt_old(struct socket *sock, int optname, char __u l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; - cinfo.hci_handle = l2cap_pi(l2cap_sk)->conn->hcon->handle; - memcpy(cinfo.dev_class, l2cap_pi(l2cap_sk)->conn->hcon->dev_class, 3); + cinfo.hci_handle = conn->hcon->handle; + memcpy(cinfo.dev_class, conn->hcon->dev_class, 3); The l2cap_sk got accidentally mixed into the sk (which is RFCOMM) and now causing a problem within getsocketopt() system call. To fix this, just re-introduce l2cap_sk and make sure the right socket is used for the low-level connection details. Reported-by: Fabio Rossi <rossi.f@inwind.it> Reported-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Tested-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-18Bluetooth: Use IS_ERR_OR_NULL for checking bt_debugfsMarcel Holtmann1-7/+7
Make sure to use IS_ERR_OR_NULL for checking the existing of the root debugfs dentry bt_debugfs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store RFCOMM address information in its own socket structureMarcel Holtmann1-13/+15
The address information of RFCOMM sockets should be stored in its own socket structure. Trying to generalize them is not helpful since different transports have different address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-09-18Bluetooth: Fix waiting for clearing of BT_SK_SUSPEND flagJohan Hedberg1-1/+6
In the case of blocking sockets we should not proceed with sendmsg() if the socket has the BT_SK_SUSPEND flag set. So far the code was only ensuring that POLLOUT doesn't get set for non-blocking sockets using poll() but there was no code in place to ensure that blocking sockets do the right thing when writing to them. This patch adds a new bt_sock_wait_ready helper function to sleep in the sendmsg call if the BT_SK_SUSPEND flag is set, and wake up as soon as it is unset. It also updates the L2CAP and RFCOMM sendmsg callbacks to take advantage of this new helper function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-10Merge branch 'master' of ↵John W. Linville1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c net/mac80211/sta_info.c net/wireless/core.h
2013-04-09bluetooth: kill unused 'module' argument of bt_procfs_init()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-07Bluetooth: RFCOMM - Fix missing msg_namelen update in rfcomm_sock_recvmsg()Mathias Krause1-0/+1
If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_stream_recvmsg(). Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08Bluetooth: discard bt_sock_unregister() errorsDavid Herrmann1-2/+1
After we successfully registered a socket via bt_sock_register() there is no reason to ever check the return code of bt_sock_unregister(). If bt_sock_unregister() fails, it means the socket _is_ already unregistered so we have what we want, don't we? Also, to get bt_sock_unregister() to fail, another part of the kernel has to unregister _our_ socket. This is sooo _wrong_ that it will break way earlier than when we unregister our socket. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin1-8/+5
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-03Bluetooth: Add missing lock nesting notationGustavo Padovan1-2/+2
This patch fixes the following report, it happens when accepting rfcomm connections: [ 228.165378] ============================================= [ 228.165378] [ INFO: possible recursive locking detected ] [ 228.165378] 3.7.0-rc1-00536-gc1d5dc4 #120 Tainted: G W [ 228.165378] --------------------------------------------- [ 228.165378] bluetoothd/1341 is trying to acquire lock: [ 228.165378] (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+...}, at: [<ffffffffa0000aa0>] bt_accept_dequeue+0xa0/0x180 [bluetooth] [ 228.165378] [ 228.165378] but task is already holding lock: [ 228.165378] (sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM){+.+...}, at: [<ffffffffa0205118>] rfcomm_sock_accept+0x58/0x2d0 [rfcomm] [ 228.165378] [ 228.165378] other info that might help us debug this: [ 228.165378] Possible unsafe locking scenario: [ 228.165378] [ 228.165378] CPU0 [ 228.165378] ---- [ 228.165378] lock(sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM); [ 228.165378] lock(sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM); [ 228.165378] [ 228.165378] *** DEADLOCK *** [ 228.165378] [ 228.165378] May be due to missing lock nesting notation Cc: stable@vger.kernel.org Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-10-19Merge branch 'master' of ↵John W. Linville1-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-09-27Bluetooth: Use %pMR in sprintf/seq_printf instead of batostrAndrei Emeltchenko1-4/+3
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in sprintf and seq_printf statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-27Bluetooth: Use %pMR in debug instead of batostrAndrei Emeltchenko1-1/+1
Instead of old unsafe batostr function use %pMR print specifier for printing Bluetooth addresses in debug and error statements. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 19:33:55 +0000