summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/mgmt.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25Bluetooth: MGMT: Fix not checking if BT_HS is enabledLuiz Augusto von Dentz1-1/+6
This checks if BT_HS is enabled relecting it on MGMT_SETTING_HS instead of always reporting it as supported. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Add suspend reason for device disconnectAbhishek Pandit-Subedi1-0/+4
Update device disconnect event with reason 0x5 to indicate that device disconnected because the controller is suspending. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-13Bluetooth: Add mgmt suspend and resume eventsAbhishek Pandit-Subedi1-0/+26
Add the controller suspend and resume events, which will signal when Bluetooth has completed preparing for suspend and when it's ready for resume. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Sonny Sasaka <sonnysasaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Add MGMT capability flags for tx power and ext advertisingDaniel Winkler1-0/+2
For new advertising features, it will be important for userspace to know the capabilities of the controller and kernel. If the controller and kernel support extended advertising, we include flags indicating hardware offloading support and support for setting tx power of adv instances. In the future, vendor-specific commands may allow the setting of tx power in advertising instances, but for now this feature is only marked available if extended advertising is supported. This change is manually verified in userspace by ensuring the advertising manager's supported_flags field is updated with new flags on hatch chromebook (ext advertising supported). Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Report num supported adv instances for hw offloadingDaniel Winkler1-3/+3
Here we make sure we properly report the number of supported advertising slots when we are using hardware offloading. If no hardware offloading is available, we default this value to HCI_MAX_ADV_INSTANCES for use in software rotation as before. This change has been tested on kukui (no ext adv) and hatch (ext adv) chromebooks by verifying "SupportedInstances" shows 5 (the default) and 6 (slots supported by controller), respectively. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Fix memory leak in read_adv_mon_features()Peilin Ye1-4/+8
read_adv_mon_features() is leaking memory. Free `rp` before returning. Fixes: e5e1e7fd470c ("Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURES") Reported-and-tested-by: syzbot+f7f6e564f4202d8601c6@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f7f6e564f4202d8601c6 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-31Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added new commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-07-30Bluetooth: Enable controller RPA resolution using Experimental featureSathish Narasimman1-2/+140
This patch adds support to enable the use of RPA Address resolution using expermental feature mgmt command. Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Enable/Disable address resolution during le create connSathish Narasimman1-1/+1
In this patch if le_create_conn process is started restrict to disable address resolution and same is disabled during le_enh_connection_complete Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-15Bluetooth: Add per-instance adv disable/removeDaniel Winkler1-0/+6
Add functionality to disable and remove advertising instances, and use that functionality in MGMT add/remove advertising calls. Currently, advertising is globally-disabled, i.e. all instances are disabled together, even if hardware offloading is available. This patch adds functionality to disable and remove individual adv instances, solving two issues: 1. On new advertisement registration, a global disable was done, and then only the new instance was enabled. This meant only the newest instance was actually enabled. 2. On advertisement removal, the structure was removed, but the instance was never disabled or removed, which is incorrect with hardware offload support. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Reviewed-by: Shyh-In Hwang <josephsih@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-10Bluetooth: core: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: le_simult_central_peripheral experimental featureAlain Michaud1-2/+23
This patch adds an le_simult_central_peripheral features which allows a clients to determine if the controller is able to support peripheral and central connections separately and at the same time. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-22Bluetooth: Add hci_dev_lock to get/set device flagsAbhishek Pandit-Subedi1-0/+8
Adding hci_dev_lock since hci_conn_params_(lookup|add) require this lock. Suggested-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-18Bluetooth: Terminate the link if pairing is cancelledManish Mandlik1-4/+18
If user decides to cancel the ongoing pairing process (e.g. by clicking the cancel button on pairing/passkey window), abort any ongoing pairing and then terminate the link if it was created because of the pair device action. Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Update background scan and report device based on advertisement ↵Miao-chen Chou1-1/+4
monitors This calls hci_update_background_scan() when there is any update on the advertisement monitors. If there is at least one advertisement monitor, the filtering policy of scan parameters should be 0x00. This also reports device found mgmt events if there is at least one monitor. The following cases were tested with btmgmt advmon-* commands. (1) add a ADV monitor and observe that the passive scanning is triggered. (2) remove the last ADV monitor and observe that the passive scanning is terminated. (3) with a LE peripheral paired, repeat (1) and observe the passive scanning continues. (4) with a LE peripheral paired, repeat (2) and observe the passive scanning continues. (5) with a ADV monitor, suspend/resume the host and observe the passive scanning continues. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Notify adv monitor removed eventMiao-chen Chou1-0/+16
This notifies management sockets on MGMT_EV_ADV_MONITOR_REMOVED event. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-remove command on one console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Notify adv monitor added eventMiao-chen Chou1-1/+17
This notifies management sockets on MGMT_EV_ADV_MONITOR_ADDED event. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-add command on one console and observe a MGMT_EV_ADV_MONITOR_ADDED event on the other Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_REMOVE_ADV_MONITORMiao-chen Chou1-0/+35
This adds the request handler of MGMT_OP_REMOVE_ADV_MONITOR command. Note that the controller-based monitoring is not yet in place. This removes the internal monitor(s) without sending HCI traffic, so the request returns immediately. The following test was performed. - Issue btmgmt advmon-remove with valid and invalid handles. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_ADD_ADV_PATTERNS_MONITORMiao-chen Chou1-0/+100
This adds the request handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR command. Note that the controller-based monitoring is not yet in place. This tracks the content of the monitor without sending HCI traffic, so the request returns immediately. The following manual test was performed. - Issue btmgmt advmon-add with valid and invalid inputs. - Issue btmgmt advmon-add more the allowed number of monitors. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURESMiao-chen Chou1-0/+48
This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES command. Since the controller-based monitoring is not yet in place, this report only the supported features but not the enabled features. The following test was performed. - Issuing btmgmt advmon-features. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add get/set device flags mgmt opAbhishek Pandit-Subedi1-0/+128
Add the get device flags and set device flags mgmt ops and the device flags changed event. Their behavior is described in detail in mgmt-api.txt in bluez. Sample btmon trace when a HID device is added (trimmed to 75 chars): @ MGMT Command: Unknown (0x0050) plen 11 {0x0001} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 ........... @ MGMT Event: Unknown (0x002a) plen 15 {0x0004} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0003} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0002} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Command Compl.. (0x0001) plen 10 {0x0001} [hci0] 18:06:14.98 Unknown (0x0050) plen 7 Status: Success (0x00) 90 c5 13 cd f3 cd 02 ....... @ MGMT Command: Add Device (0x0033) plen 8 {0x0001} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Device Added (0x001a) plen 8 {0x0004} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Device Added (0x001a) plen 8 {0x0003} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Device Added (0x001a) plen 8 {0x0002} [hci0] 18:06:14.98 LE Address: CD:F3:CD:13:C5:90 (Static) Action: Auto-connect remote device (0x02) @ MGMT Event: Unknown (0x002a) plen 15 {0x0004} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0003} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0002} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... @ MGMT Event: Unknown (0x002a) plen 15 {0x0001} [hci0] 18:06:14.98 90 c5 13 cd f3 cd 02 01 00 00 00 01 00 00 00 ............... Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add bdaddr_list_with_flags for classic whitelistAbhishek Pandit-Subedi1-2/+3
In order to more easily add device flags to classic devices, create a new type of bdaddr_list that supports setting flags. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: mgmt: Add commands for runtime configurationMarcel Holtmann1-0/+7
This adds the required read/set commands for runtime configuration. Even while currently no parameters are specified, the commands are made available. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: implement read/set default system parameters mgmtAlain Michaud1-0/+8
This patch implements the read default system parameters and the set default system parameters mgmt commands. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-11Bluetooth: Introduce debug feature when dynamic debug is disabledMarcel Holtmann1-0/+87
In case dynamic debug is disabled, this feature allows a vendor platform to provide debug statement printing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Add support for experimental features configurationMarcel Holtmann1-0/+58
To enable platform specific experimental features, introduce this new set of management commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Replace BT_DBG with bt_dev_dbg for management supportMarcel Holtmann1-111/+110
The majority of management interaction are based on a controller index and have a hci_dev associated with it. So use bt_dev_dbg to have a clean way of indentifying the controller the debug message belongs to. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Add MGMT_EV_PHY_CONFIGURATION_CHANGED to supported listMarcel Holtmann1-0/+1
The event MGMT_EV_PHY_CONFIGURATION_CHANGED wasn't listed in the list of supported events. So add it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added new commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for reading security informationMarcel Holtmann1-0/+53
To allow userspace to make correcty security policy decision, the kernel needs to export a few details of the supported security features and encryption key size information. This command exports this information and also allows future extensions if needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-03-11Bluetooth: Pause discovery and advertising during suspendAbhishek Pandit-Subedi1-0/+41
To prevent spurious wake ups, we disable any discovery or advertising when we enter suspend and restore it when we exit suspend. While paused, we disable any management requests to modify discovery or advertising. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: mgmt: add mgmt_cmd_status in add_advertisingJoseph Hwang1-1/+4
If an error occurs during request building in add_advertising(), remember to send MGMT_STATUS_FAILED command status back to bluetoothd. Signed-off-by: Joseph Hwang <josephsih@chromium.org> Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added setting and command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-03-08Bluetooth: Enable erroneous data reporting if WBS is supportedAlain Michaud1-2/+63
This change introduces a wide band speech setting which allows higher level clients to query the local controller support for wide band speech as well as set the setting state when the radio is powered off. Internally, this setting controls if erroneous data reporting is enabled on the controller. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Support querying for WBS support through MGMTAlain Michaud1-0/+4
This patch provides a mechanism for MGMT interface client to query the capability of the controller to support WBS. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-22Bluetooth: fix appearance typo in mgmt.cAlain Michaud1-4/+4
This change addresses a typo in the set_appearance handler. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-22Bluetooth: adding missing const decoration to mgmt_status_tableAlain Michaud1-1/+1
This change simply adds a missing const decoration to the mtmt_status_table definition. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-16Bluetooth: Increment management interface revisionMarcel Holtmann1-1/+1
Increment the mgmt revision due to the recently added commands. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-15Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.Alain Michaud1-0/+76
MGMT command is added to receive the list of blocked keys from user-space. The list is used to: 1) Block keys from being distributed by the device during the ke distribution phase of SMP. 2) Filter out any keys that were previously saved so they are no longer used. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: mgmt: Use struct_size() helperGustavo A. R. Silva1-6/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct mgmt_rp_get_connections { ... struct mgmt_addr_info addr[0]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*rp) + (i * sizeof(struct mgmt_addr_info)); with: struct_size(rp, addr, i) Also, notice that, in this case, variable rp_len is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: Use struct_size() helperGustavo A. R. Silva1-7/+4
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-26Bluetooth: Add quirk for reading BD_ADDR from fwnode propertyMatthias Kaehlcke1-2/+4
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve the public Bluetooth address from the firmware node property 'local-bd-address'. If quirk is set and the property does not exist or is invalid the controller is marked as unconfigured. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-26Bluetooth: mgmt: Use struct_size() helperGustavo A. R. Silva1-5/+3
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes, in particular in the context in which this code is being used. So, change the following form: sizeof(*rp) + (sizeof(rp->entry[0]) * count); to : struct_size(rp, entry, count) Notice that, in this case, variable rp_len is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-09-26Bluetooth: SMP: fix crash in unpairingMatias Karhumaa1-5/+2
In case unpair_device() was called through mgmt interface at the same time when pairing was in progress, Bluetooth kernel module crash was seen. [ 600.351225] general protection fault: 0000 [#1] SMP PTI [ 600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G OE 4.19.0-rc1+ #1 [ 600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017 [ 600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth] [ 600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01 [ 600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246 [ 600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60 [ 600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500 [ 600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00 [ 600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800 [ 600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00 [ 600.351295] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000 [ 600.351298] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0 [ 600.351302] Call Trace: [ 600.351325] smp_failure+0x4f/0x70 [bluetooth] [ 600.351345] smp_cancel_pairing+0x74/0x80 [bluetooth] [ 600.351370] unpair_device+0x1c1/0x330 [bluetooth] [ 600.351399] hci_sock_sendmsg+0x960/0x9f0 [bluetooth] [ 600.351409] ? apparmor_socket_sendmsg+0x1e/0x20 [ 600.351417] sock_sendmsg+0x3e/0x50 [ 600.351422] sock_write_iter+0x85/0xf0 [ 600.351429] do_iter_readv_writev+0x12b/0x1b0 [ 600.351434] do_iter_write+0x87/0x1a0 [ 600.351439] vfs_writev+0x98/0x110 [ 600.351443] ? ep_poll+0x16d/0x3d0 [ 600.351447] ? ep_modify+0x73/0x170 [ 600.351451] do_writev+0x61/0xf0 [ 600.351455] ? do_writev+0x61/0xf0 [ 600.351460] __x64_sys_writev+0x1c/0x20 [ 600.351465] do_syscall_64+0x5a/0x110 [ 600.351471] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 600.351474] RIP: 0033:0x7fb2bdb62fe0 [ 600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24 [ 600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 [ 600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0 [ 600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004 [ 600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000 [ 600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001 [ 600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000 [ 600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap [ 600.351569] snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi [ 600.351637] ---[ end trace e49e9f1df09c94fb ]--- [ 600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth] [ 600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01 [ 600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246 [ 600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60 [ 600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500 [ 600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00 [ 600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800 [ 600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00 [ 600.351684] FS: 00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000 [ 600.351686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0 Crash happened because list_del_rcu() was called twice for smp->ltk. This was possible if unpair_device was called right after ltk was generated but before keys were distributed. In this commit smp_cancel_pairing was refactored to cancel pairing if it is in progress and otherwise just removes keys. Once keys are removed from rcu list, pointers to smp context's keys are set to NULL to make sure removed list items are not accessed later. This commit also adjusts the functionality of mgmt unpair_device() little bit. Previously pairing was canceled only if pairing was in state that keys were already generated. With this commit unpair_device() cancels pairing already in earlier states. Bug was found by fuzzing kernel SMP implementation using Synopsys Defensics. Reported-by: Pekka Oikarainen <pekka.oikarainen@synopsys.com> Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-06Bluetooth: remove redundant variables 'adv_set' and 'cp'YueHaibing1-3/+0
Variables 'adv_set' and 'cp' are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: net/bluetooth/hci_event.c:1135:29: warning: variable 'adv_set' set but not used [-Wunused-but-set-variable] net/bluetooth/mgmt.c:3359:39: warning: variable 'cp' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-07-30Bluetooth: Implement secondary advertising on different PHYsJaganath Kanakkassery1-3/+15
This patch adds support for advertising in primary and secondary channel on different PHYs. User can add the phy preference in the flag based on which phy type will be added in extended advertising parameter would be set. @ MGMT Command: Add Advertising (0x003e) plen 11 Instance: 1 Flags: 0x00000200 Advertise in CODED on Secondary channel Duration: 0 Timeout: 0 Advertising data length: 0 Scan response length: 0 < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0000 Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE Coded (0x03) Secondary max skip: 0x00 Secondary PHY: LE Coded (0x03) SID: 0x00 Scan request notifications: Disabled (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement Set ADV set random addressJaganath Kanakkassery1-0/+2
This basically sets the random address for the adv instance Random address can be set only if the instance is created which is done in Set ext adv param. Random address and rpa expire timer and flags have been added to adv instance which will be used when the respective instance is scheduled. This introduces a hci_get_random_address() which returns the own address type and random address (rpa or nrpa) based on the instance flags and hdev flags. New function is required since own address type should be known before setting adv params but address can be set only after setting params. < HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7 Advertising handle: 0x00 Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56) > HCI Event: Command Complete (0x0e) plen 4 LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Implement disable and removal of adv instanceJaganath Kanakkassery1-0/+3
If ext adv is enabled then use ext adv to disable as well. Also remove the adv set during LE disable. < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2 Extended advertising: Disabled (0x00) Number of sets: Disable all sets (0x00) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Use Set ext adv/scan rsp data if controller supportsJaganath Kanakkassery1-3/+10
This patch implements Set Ext Adv data and Set Ext Scan rsp data if controller support extended advertising. Currently the operation is set as Complete data and fragment preference is set as no fragment < HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35 Handle: 0x00 Operation: Complete extended advertising data (0x03) Fragment preference: Minimize fragmentation (0x01) Data length: 0x15 16-bit Service UUIDs (complete): 2 entries Heart Rate (0x180d) Battery Service (0x180f) Name (complete): Test LE Company: Google (224) Data: 0102 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Data (0x08|0x0037) ncmd 1 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30Bluetooth: Impmlement extended adv enableJaganath Kanakkassery1-5/+17
This patch basically replaces legacy adv with extended adv based on the controller support. Currently there is no design change. ie only one adv set will be enabled at a time. This also adds tx_power in instance and store whatever returns from Set_ext_parameter, use the same in adv data as well. For instance 0 tx_power is stored in hdev only. < HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25 Handle: 0x00 Properties: 0x0010 Use legacy advertising PDUs: ADV_NONCONN_IND Min advertising interval: 1280.000 msec (0x0800) Max advertising interval: 1280.000 msec (0x0800) Channel map: 37, 38, 39 (0x07) Own address type: Random (0x01) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00) TX power: 127 dbm (0x7f) Primary PHY: LE 1M (0x01) Secondary max skip: 0x00 Secondary PHY: LE 1M (0x01) SID: 0x00 Scan request notifications: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 5 LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1 Status: Success (0x00) TX power (selected): 7 dbm (0x07) < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6 Extended advertising: Enabled (0x01) Number of sets: 1 (0x01) Entry 0 Handle: 0x00 Duration: 0 ms (0x00) Max ext adv events: 0 > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2 Status: Success (0x00) Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 09:39:28 +0000