summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/l2cap_sock.c
AgeCommit message (Collapse)AuthorFilesLines
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller1-3/+3
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26Bluetooth: Fix returning peer address in pending connect stateJohan Hedberg1-1/+2
We should let user space request the peer address also in the pending connect states, i.e. BT_CONNECT and BT_CONNECT2. There is existing user space code that tries to do this and will fail without extending the set of allowed states for the peer address information. This patch adds the two states to the allowed ones in the L2CAP and RFCOMM sock_getname functions, thereby preventing ENOTCONN from being returned. Reported-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Tested-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-03-12Bluetooth: Convert uses of __constant_<foo> to <foo>Joe Perches1-3/+3
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-14Bluetooth: Enable LE L2CAP CoC support by defaultJohan Hedberg1-29/+0
Now that the LE L2CAP Connection Oriented Channel support has undergone a decent amount of testing we can make it officially supported. This patch removes the enable_lecoc module parameter which was previously needed to enable support for LE L2CAP CoC. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Always use l2cap_chan->psm for returning PSM to user spaceJohan Hedberg1-2/+2
The l2cap_chan->psm value is always set to a valid value for a connection oriented channel. The l2cap_chan->sport is used for tracking local PSM allocations but will not always have a proper value, such as with connected sockets derived from a listening socket. This patch fixes the sock_getname callback to always use chan->psm when returning address information. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Refuse peer L2CAP address reading when not connectedJohan Hedberg1-0/+3
When we're not connected the peer address information is undefined. This patch fixes the remote address getting to return a proper error in case the state is anything else than BT_CONNECTED. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Fix CID initialization for fixed channelsJohan Hedberg1-0/+5
Fixed channels have the same source and destination CID. Ensure that the values get properly initialized when receiving incoming connections and deriving values from the parent socket. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Fix BT_SECURITY socket option for fixed channels (ATT)Johan Hedberg1-0/+2
The BT_SECURITY option should also be allowed for fixed channels, so punch the appropriate hole for it when checking for the channel type. The main user of fixed CID user space sockets is right now ATT (which is broken without this patch). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Switch ATT channels to use L2CAP_CHAN_FIXEDJohan Hedberg1-0/+9
ATT channels are not connection oriented so having them use L2CAP_CHAN_CONN_ORIENTED is quite confusing. Instead, use the new L2CAP_CHAN_FIXED type and ensure that the MTU and CID values get properly set. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-02-13Bluetooth: Handle security level 4 for L2CAP connectionsMarcel Holtmann1-0/+10
With the introduction of security level 4, the L2CAP sockets need to be made aware of this new level. This change ensures that the pairing requirements are set correctly for these connections. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2014-01-18net: add build-time checks for msg->msg_name sizeSteffen Hurrle1-1/+1
This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: Steffen Hurrle <steffen@hurrle.net> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Bluetooth: Default to no security with L2CAP RAW socketsJohan Hedberg1-0/+3
L2CAP RAW sockets can be used for things which do not involve establishing actual connection oriented L2CAP channels. One example of such usage is the l2ping tool. The default security level for L2CAP sockets is LOW, which implies that for SSP based connection authentication is still requested (although with no MITM requirement), which is not what we want (or need) for things like l2ping. Therefore, default to one lower level, i.e. BT_SECURITY_SDP, for L2CAP RAW sockets in order not to trigger unwanted authentication requests. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Simplify l2cap_chan initialization for LE CoCJohan Hedberg1-2/+2
The values in l2cap_chan that are used for actually transmitting data only need to be initialized right after we've received an L2CAP Connect Request or just before we send one. The only thing that we need to initialize though bind() and connect() is the chan->mode value. This way all other initializations can be done in the l2cap_le_flowctl_init function (which now becomes private to l2cap_core.c) and the l2cap_le_flowctl_start function can be completely removed. Also, since the l2cap_sock_init function initializes the imtu and omtu to adequate values these do not need to be part of l2cap_le_flowctl_init. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Fix validating LE PSM valuesJohan Hedberg1-9/+31
LE PSM values have different ranges than those for BR/EDR. The valid ranges for fixed, SIG assigned values is 0x0001-0x007f and for dynamic PSM values 0x0080-0x00ff. We need to ensure that bind() and connect() calls conform to these ranges when operating on LE CoC sockets. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Introduce L2CAP channel callback for suspendingJohan Hedberg1-0/+9
Setting the BT_SK_SUSPEND socket flag from the L2CAP core is causing a dependency on the socket. So instead of doing that, use a channel callback into the socket handling to suspend. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add new BT_SNDMTU and BT_RCVMTU socket optionsJohan Hedberg1-0/+76
This patch adds new socket options for LE sockets since the existing L2CAP_OPTIONS socket option is not usable for LE. For now, the new socket options also require LE CoC support to be explicitly enabled to leave some playroom in case something needs to be changed in a backwards incompatible way. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Limit L2CAP_OPTIONS socket option usage with LEJohan Hedberg1-0/+15
Most of the values in L2CAP_OPTIONS are not applicable for LE and those that are have different semantics. It makes therefore sense to completely block this socket option for LE and add (in a separate patch) a new socket option for tweaking the values that do make sense (mainly the send and receive MTU). Legacy user space ATT code still depends on getsockopt for L2CAP_OPTIONS though so we need to plug a hole for that for backwards compatibility. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Track LE L2CAP credits in l2cap_chanJohan Hedberg1-0/+2
This patch adds tracking of L2CAP connection oriented channel local and remote credits to struct l2cap_chan and ensures that connect requests and responses contain the right values. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add LE L2CAP flow control modeJohan Hedberg1-3/+18
The LE connection oriented channels have their own mode with its own data transfer rules. In order to implement this properly we need to distinguish L2CAP channels operating in this mode from other modes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-12-05Bluetooth: Add module parameter to enable LE CoC supportJohan Hedberg1-6/+12
Along with the L2CAP Connection Oriented Channels features it is now allowed to use both custom fixed CIDs as well as PSM based (connection oriented connections). Since the support for this (with the subsequent patches) is still on an experimental stage, add a module parameter to enable it. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Remove sk member from struct l2cap_chanGustavo Padovan1-2/+0
There is no access to chan->sk in L2CAP core now. This change marks the end of the task of splitting L2CAP between Core and Socket, thus sk is now gone from struct l2cap_chan. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Add L2CAP channel to skb private dataGustavo Padovan1-0/+2
Adding the channel to the skb private data makes possible to us know which channel the skb we have came from. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Remove parent socket usage from l2cap_core.cGustavo Padovan1-0/+4
The parent socket is not used inside the L2CAP core anymore. We only lock it to indirect access through the new_connection() callback. The hold of the socket lock was moved to the new_connection() callback. Inside L2CAP core the channel lock is now used in l2cap_le_conn_ready() and l2cap_conn_ready() to protect the execution of these two functions during the handling of new incoming connections. This change remove the socket lock usage from L2CAP core while keeping the code safe against race conditions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Hold socket in defer callback in L2CAP socketGustavo Padovan1-2/+6
In both places that we use the defer callback the socket lock is held for a indirect sk access inside __l2cap_change_state() and chan->ops->defer(), all the rest of the code between lock_sock() and release_sock() is already protected by the channel lock and won't be affected by this change. We now use l2cap_change_state(), the locked version of the change state function, and the defer callback does the locking itself now. This does not affect other uses of the defer callback. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-21Bluetooth: Do not access chan->sk directlyGustavo Padovan1-1/+2
In the process of removing socket usage from L2CAP we now access the L2CAP socket from the data member of struct l2cap_chan. For the L2CAP socket user the data member points to the L2CAP socket. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-18Bluetooth: Fix ATT socket backwards compatibility with user spaceJohan Hedberg1-2/+25
Old user space versions bind the Attribute Protocol socket to BDADDR_BREDR when they should be using BDADDR_LE_PUBLIC or BDADDR_LE_RANDOM. The kernel recently introduced stricter checks on the socket parameters but we need to punch this hole for old user space versions to keep them working. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-16Bluetooth: Socket address parameter for CID is in little endianMarcel Holtmann1-2/+2
The L2CAP socket parameter for CID are actually provided in little endian. So convert our constants into little endian before comparing them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-16Bluetooth: Reintroduce socket restrictions for LE socketsJohan Hedberg1-0/+18
Right now we do not allow user space to use connection oriented channels on LE, and the only CID that can be used is the Attribute Protocol one. These restrictions went away together with the recent refactoring of the L2CAP code, but this patch puts them back to their appropriate places. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-15Bluetooth: Move l2cap_wait_ack() to l2cap_sock.cGustavo Padovan1-0/+32
The wait_ack code has a heavy dependency on the socket data structures and, as of now, it won't be worthless change it to use non-socket structures as the only user of such feature is a socket. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-15Bluetooth: Add chan->ops->set_shutdown()Gustavo Padovan1-0/+10
We need to remove all direct access of struct sock from L2CAP core. This change is pretty simple and just add a new L2CAP channel callback to do the work in the L2CAP socket side. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-15Bluetooth: Access sk_sndtimeo indirectly in l2cap_core.cGustavo Padovan1-0/+8
As part of the work to remove struct sock from l2cap_core.c and make it more generic we remove in this commit the direct access to sk->sk_sndtimeo member. This objective of this change is purely remove sk usage from l2cap_core.c Now we have a new l2cap ops to get the current value of sk->sndtimeo. A l2cap_chan_no_get_sndtimeo was added for users of L2CAP that doesn't need to set a timeout. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-15Bluetooth: Extend state_change() call to report errors tooGustavo Padovan1-1/+5
Instead of creating an new function pointer to report errors we are just reusing state_change for that and there is a simple reason for this, one place in the l2cap_core.c code needs, in a locked sk, set both the sk_state and sk_err. If we create two different functions for this we would need to release the lock between the two operation putting the socket in non desired state. The change is transparent to the l2cap_core.c code, user that only needs to set the state won't need any modification. This is another step of an ongoing work to make l2cap_core.c totally independent from l2cap's struct sock. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Check that bind() bdaddr type matches connect()Johan Hedberg1-0/+6
If a socket was bound to an address type other than BR/EDR (such as LE) we should reject trying to connect it to a BR/EDR address. The same applies for binding to BR/EDR and trying to connect to non-BR/EDR. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Reject invalid bdaddr types for socketsJohan Hedberg1-0/+6
We need to verify that the bdaddr type passed to connect() and bind() is within the set of valid values. If it is not we need to cleanly fail with EINVAL. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-14Bluetooth: Introduce L2CAP channel callback for resumingMarcel Holtmann1-0/+9
Clearing the BT_SK_SUSPEND socket flag from the L2CAP core is causing a dependency on the socket. So intead of doing that, use a channel callback into the socket handling to resume. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-14Bluetooth: Introduce L2CAP channel flag for defer setupMarcel Holtmann1-2/+5
The L2CAP core should not look into the socket flags to figure out the setting of defer setup. So introduce a L2CAP channel flag that mirrors the socket flag. Since the defer setup option is only set in one place this becomes a really easy thing to do. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Provide msg_name callback for L2CAP connectionless channelsMarcel Holtmann1-1/+14
The L2CAP connectionless channels use SOCK_DGRAM and recvmsg() and need to receive the remote BD_ADDR and PSM information via msg_name from the recvmsg() system call. So in case the L2CAP socket is for connectionless channels, provide a msg_name callback that can update the data. Also store the remote BD_ADDR and PSM in the skb so it can be extracted later on. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Use l2cap_pi(sk) directly where possibleMarcel Holtmann1-8/+7
There are few places where it makes sense to use l2cap_pi(sk) directly instead of assigning it to temporary structure. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Return the correct address type for L2CAP socketsMarcel Holtmann1-0/+3
The L2CAP sockets can use BR/EDR public, LE public and LE random addresses for various combinations of source and destination devices. So make sure that getsockname(), getpeername() and accept() return the correct address type. For this the address type of the source and destination is stored with the L2CAP channel information. The stored address type is not the one specific for the HCI protocol. It is the address type used for the L2CAP sockets and the management interface. The underlying HCI connections store the HCI address type. If needed, it gets converted to the socket address type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-13Bluetooth: Store address information in L2CAP channel structureMarcel Holtmann1-3/+3
With the effort of abstracting the L2CAP socket from the underlying L2CAP channel it is important to store the source and destination address information directly in the L2CAP channel structure. Direct access to the HCI connection address information is not possible since they might not be avaiable at L2CAP channel creation time. The address information will be updated when the underlying BR/EDR or LE connection status changes. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-12Bluetooth: Allow 3D profile to use security mode 4 level 0Marcel Holtmann1-0/+4
The PSM 0x0021 is dedicated to the 3D profile and has permission to use security mode 4 level 0 for L2CAP connectionless unicast data transfers. When establishing a L2CAP connectionless channel on PSM 0x0021, it will no longer force Secure Simple Pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-12Bluetooth: Limit security mode 4 level 0 to connection oriented channelsMarcel Holtmann1-3/+7
The exception for certain PSM channels when it comes to security mode 4 level 0 should only be checked when actually a connection oriented channel is established. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-11Bluetooth: Move smp.h header file into net/bluetooth/Marcel Holtmann1-1/+2
The smp.h header file is only used internally by the bluetooth.ko module and is not a public API. So make it local to the core Bluetooth module. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-10-07Bluetooth: Fix variable shadow warningsJohannes Berg1-1/+1
Sparse points out three places where variables are shadowed, rename two of the variables and remove the duplicate third. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2013-10-02Bluetooth: Provide high speed configuration optionMarcel Holtmann1-10/+0
Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that this can now be changed per controller and not just global. This patch removes the module parameter and exposes the high speed setting of the management interface to all controllers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2013-09-25Bluetooth: Clean up socket locking in l2cap_sock_recvmsgJohan Hedberg1-2/+2
This patch cleans up the locking login in l2cap_sock_recvmsg by pairing up each lock_sock call with a release_sock call. The function already has a "done" label that handles releasing the socket and returning from the function so the fix is rather simple. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-09-18Bluetooth: Fix waiting for clearing of BT_SK_SUSPEND flagJohan Hedberg1-0/+6
In the case of blocking sockets we should not proceed with sendmsg() if the socket has the BT_SK_SUSPEND flag set. So far the code was only ensuring that POLLOUT doesn't get set for non-blocking sockets using poll() but there was no code in place to ensure that blocking sockets do the right thing when writing to them. This patch adds a new bt_sock_wait_ready helper function to sleep in the sendmsg call if the BT_SK_SUSPEND flag is set, and wake up as soon as it is unset. It also updates the L2CAP and RFCOMM sendmsg callbacks to take advantage of this new helper function. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-06-23Bluetooth: Rename L2CAP_CID_LE_DATA to L2CAP_CID_ATTJohan Hedberg1-2/+2
In future Core Specification versions the ATT CID will be just one of many possible CIDs that can be used for data transfer. Therefore, it makes sense to rename the define for the ATT CID to something less ambigous. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-09bluetooth: kill unused 'module' argument of bt_procfs_init()Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-01 07:49:49 +0000