summaryrefslogtreecommitdiffstats
path: root/net/bluetooth/hci_event.c
AgeCommit message (Collapse)AuthorFilesLines
2012-08-06Bluetooth: Set name_state to unknown when entry name is emptyRam Malovany1-0/+2
When the name of the given entry is empty , the state needs to be updated accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix using a NULL inquiry cache entryRam Malovany1-5/+11
If the device was not found in a list of found devices names of which are pending.This may happen in a case when HCI Remote Name Request was sent as a part of incoming connection establishment procedure. Hence there is no need to continue resolving a next name as it will be done upon receiving another Remote Name Request Complete Event. This will fix a kernel crash when trying to use this entry to resolve the next name. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix using NULL inquiry entryRam Malovany1-0/+3
If entry wasn't found in the hci_inquiry_cache_lookup_resolve do not resolve the name.This will fix a kernel crash when trying to use NULL pointer. Cc: stable@vger.kernel.org Signed-off-by: Ram Malovany <ramm@ti.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix legacy pairing with some devicesSzymon Janc1-1/+6
Some devices e.g. some Android based phones don't do SDP search before pairing and cancel legacy pairing when ACL is disconnected. PIN Code Request event which changes ACL timeout to HCI_PAIRING_TIMEOUT is only received after remote user entered PIN. In that case no L2CAP is connected so default HCI_DISCONN_TIMEOUT (2 seconds) is being used to timeout ACL connection. This results in problems with legacy pairing as remote user has only few seconds to enter PIN before ACL is disconnected. Increase disconnect timeout for incomming connection to HCI_PAIRING_TIMEOUT if SSP is disabled and no linkey exists. To avoid keeping ACL alive for too long after SDP search set ACL timeout back to HCI_DISCONN_TIMEOUT when L2CAP is connected. 2012-07-19 13:24:43.413521 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:02:72:D6:6A:3F ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 2012-07-19 13:24:43.425224 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 2012-07-19 13:24:43.885222 > HCI Event: Role Change (0x12) plen 8 status 0x00 bdaddr 00:02:72:D6:6A:3F role 0x01 Role: Slave 2012-07-19 13:24:44.054221 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 42 bdaddr 00:02:72:D6:6A:3F type ACL encrypt 0x00 2012-07-19 13:24:44.054313 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 42 2012-07-19 13:24:44.055176 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:02:72:D6:6A:3F mode 0 2012-07-19 13:24:44.056217 > HCI Event: Max Slots Change (0x1b) plen 3 handle 42 slots 5 2012-07-19 13:24:44.059218 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 0 2012-07-19 13:24:44.062192 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 1 2012-07-19 13:24:44.067219 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 42 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 2012-07-19 13:24:44.067248 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 42 page 1 2012-07-19 13:24:44.071217 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 2012-07-19 13:24:44.076218 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 42 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 2012-07-19 13:24:44.076249 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:02:72:D6:6A:3F mode 2 clkoffset 0x0000 2012-07-19 13:24:44.081218 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 2012-07-19 13:24:44.105214 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:02:72:D6:6A:3F name 'uw000951-0' 2012-07-19 13:24:44.105284 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 42 2012-07-19 13:24:44.111207 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2012-07-19 13:24:44.112220 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.112249 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.115215 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:44.116215 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:02:72:D6:6A:3F 2012-07-19 13:24:48.099184 > HCI Event: Auth Complete (0x06) plen 3 status 0x13 handle 42 Error: Remote User Terminated Connection 2012-07-19 13:24:48.179182 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 42 reason 0x13 Reason: Remote User Terminated Connection Cc: stable@vger.kernel.org Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-07-11Bluetooth: debug: Use standard hex object specifiers in hci_eventAndrei Emeltchenko1-85/+85
To help debugging printed hex object use standard bluetooth specifiers in hci_event. The patch changes format from 0x%04x to 0x%4.4x; print manufacturer id and handle in hex instead of int; print opcode always in 0x%4.4x format; status in 0x%2.2x. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-11Merge branch 'for-upstream' of ↵Gustavo Padovan1-0/+48
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Conflicts: net/bluetooth/hci_event.c
2012-06-08Bluetooth: Add support for encryption key refreshJohan Hedberg1-0/+48
With LE/SMP the completion of a security level elavation from medium to high is indicated by a HCI Encryption Key Refresh Complete event. The necessary behavior upon receiving this event is a mix of what's done for auth_complete and encryption_change, which is also where most of the event handling code has been copied from. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Fix not removing hci_conn for failed LE connectionAndrzej Kaczmarek1-9/+13
This patch changes way LE Connection Complete event with error status are handled. BDADDR returned in such event packet do not need to be valid and should not be used to search for existing hci_conn. Instead, any hci_conn with BT_CONNECT state should be matched since there can be only one pending LE outgoing connection at any time. If not handled properly, appriopriate hci_conn will not be removed and subsequent connection to given peer will try to reuse it without making actual connection attempt. 2012-05-07 11:21:39.133378 < HCI Command: LE Create Connection (0x08|0x000d) plen 25 bdaddr 00:22:D0:10:13:EE type 1 2012-05-07 11:21:39.138774 > HCI Event: Command Status (0x0f) plen 4 LE Create Connection (0x08|0x000d) status 0x00 ncmd 1 2012-05-07 11:21:44.752854 < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 2012-05-07 11:21:44.759475 > HCI Event: Command Complete (0x0e) plen 4 LE Create Connection Cancel (0x08|0x000e) ncmd 1 2012-05-07 11:21:44.764479 > HCI Event: LE Meta Event (0x3e) plen 19 LE Connection Complete status 0x02 handle 0, role master bdaddr 00:00:00:00:00:00 (Public) [14898.739425] [6603] hci_connect: hci0 dst 00:22:D0:10:13:EE [14898.739429] [6603] hci_conn_add: hci0 dst 00:22:D0:10:13:EE [14898.739434] [6603] hci_conn_init_sysfs: conn ffff880079f03000 [14898.739440] [6603] hci_send_cmd: hci0 opcode 0x200d plen 25 [14898.739443] [6603] hci_send_cmd: skb len 28 [14898.739487] [6603] hci_chan_create: hci0 conn ffff880079f03000 ... [14938.860231] [55] hci_send_cmd: hci0 opcode 0x200e plen 0 ... [14938.876427] [55] hci_le_conn_complete_evt: hci0 status 2 [14938.876433] [55] hci_conn_add: hci0 dst 00:00:00:00:00:00 [14938.876439] [55] hci_conn_init_sysfs: conn ffff88007aeff800 [14938.876454] [55] hci_send_to_control: len 14 [14938.876470] [55] l2cap_connect_cfm: hcon ffff88007aeff800 bdaddr 00:00:00:00:00:00 status 2 [14938.876474] [55] hci_conn_del: hci0 conn ffff88007aeff800 handle 0 Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Acked-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-06-05Bluetooth: Use __constant modifier in HCI codeAndrei Emeltchenko1-3/+3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use lmp_ssp_capable() macroGustavo Padovan1-1/+1
Make the check more user friendly. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove unnecessary headers includeGustavo Padovan1-14/+1
Most of the include were unnecessary or already included by some other header. Replace module.h by export.h where possible. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in the subsystemGustavo Padovan1-9/+14
This is some leftover from the last patches that fixed style. It is mostly line over 80 characters fixes reported by checkpatch.pl. checkpatch.pl is clean for these files now. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Remove most of the inline usageGustavo Padovan1-85/+59
Only obvious cases were left as inline, mostly oneline functions. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Use defined link key sizeAndrei Emeltchenko1-1/+1
Remove magic number with defined link key size. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-06-05Bluetooth: Fix coding style in hci_event.cGustavo Padovan1-104/+135
Follow the net subsystem rules. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-16Bluetooth: Report proper error number in disconnectionGustavo Padovan1-1/+1
If encryption change fails we should disconnect with auth failure error code. Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-16Bluetooth: Fix EIR data generation for mgmt_device_foundVishal Agarwal1-1/+3
The mgmt_device_found function expects to receive only the significant part of the EIR data so it needs to be removed before calling the function. This patch adds a new eir_get_length() helper function to calculate the length of the significant part. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-16Bluetooth: Fix Inquiry with RSSI event maskJohan Hedberg1-1/+1
The right bit for "Inquiry with RSSI" is 0x02 and not 0x04 (which means "Read Remote Extended Features Complete"). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothGustavo Padovan1-2/+9
2012-05-14Bluetooth: mgmt: Fix device_connected sending orderJohan Hedberg1-2/+2
The mgmt_ev_device_connected signal must be sent before any event indications happen for sockets associated with the connection. Otherwise e.g. device authorization for the sockets will fail with ENOTCONN as user space things that there is no baseband link. This patch fixes the issue by ensuring that the device_connected event if sent (if it hasn't been so already) as soon as the first ACL data packet arrives from the remote device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-14Bluetooth: notify userspace of security level changeGustavo Padovan1-0/+7
It fixes L2CAP socket based security level elevation during a connection. The HID profile needs this (for keyboards) and it is the only way to achieve the security level elevation when using the management interface to talk to the kernel (hence the management enabling patch being the one that exposes this issue). It enables the userspace a security level change when the socket is already connected and create a way to notify the socket the result of the request. At the moment of the request the socket is made non writable, if the request fails the connections closes, otherwise the socket is made writable again, POLL_OUT is emmited. Signed-off-by: Gustavo Padovan <gustavo@padovan.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-09Bluetooth: Enable Low Energy support by defaultMarcel Holtmann1-1/+1
The Bluetooth Low Energy support so far was disabled by default via a module parameter. With this change the module parameter will be removed and Low Energy is enabled by default. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: Remove advertising cacheAndre Guedes1-7/+0
User-space pass the remote device address type to kernel through struct sockaddr_l2 what makes the advertising useless. This patch removes all advertising cache code. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2012-05-09Bluetooth: mgmt: Fix missing connect failed event for LEHemant Gupta1-0/+2
This patch adds management connect failed event when LE Create Connection Command fails to inform user space that LE Connection failed to get established. Signed-off-by: Hemant Gupta <hemant.gupta@stericsson.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-09Bluetooth: Ignore inquiry results from periodic inquiryAndre Guedes1-0/+9
This patch changes inquiry result function handlers so they ignore inquiry result events if periodic inquiry is enabled. Signed-off-by: Andre Guedes <aguedespe@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: Add HCI_PERIODIC_INQ to dev_flagsAndre Guedes1-1/+9
This patch adds the HCI_PERIODIC_INQ flag to dev_flags. This flag tracks if periodic inquiry is enabled or not. Signed-off-by: Andre Guedes <aguedespe@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: Add Periodic Inquiry command complete handlerAndre Guedes1-0/+11
This patch adds a handler function to Periodic Inquiry command complete event. Signed-off-by: Andre Guedes <aguedespe@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-05-09Bluetooth: LE support for MGMT stop discoveryAndre Guedes1-1/+5
This patch adds LE support to MGMT stop discovery command. So, now we are able to cancel LE discovery procedures (LE-only and interleaved). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-09Bluetooth: Fix type in cpu_to_le conversionAndrei Emeltchenko1-3/+3
Use struct hci_cp_write_def_link_policy to overcome sparse warnigs below: ... net/bluetooth/hci_event.c:633:21: warning: incorrect type in assignment (different base types) net/bluetooth/hci_event.c:633:21: expected unsigned short [unsigned] [assigned] [usertype] link_policy net/bluetooth/hci_event.c:633:21: got restricted __le16 [usertype] <noident> ... Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-09Bluetooth: Add TX power tag to EIR dataMarcel Holtmann1-3/+6
The Inquiry Response TX power tag should be added to the Extended Inquiry Data (EIR) as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-05-09Bluetooth: Check FINDING state in interleaved discoveryAndre Guedes1-1/+2
In order to do interleaved discovery we should be in DISCOVERY_ FINDING state. Otherwise, discovery should be stopped. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-05-09Bluetooth: trivial: Correct endian conversionAndrei Emeltchenko1-1/+1
Correct endian conversion reported by sparse Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-04-27Merge branch 'for-upstream' of ↵John W. Linville1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
2012-04-24Bluetooth: Fix missing break in hci_cmd_complete_evtSzymon Janc1-0/+1
Command complete event for HCI_OP_USER_PASSKEY_NEG_REPLY would result in calling handler function also for HCI_OP_LE_SET_SCAN_PARAM. This could result in undefined behaviour. Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
2012-04-16Bluetooth: Temporary keys should be retained during connectionVishal Agarwal1-0/+2
If a key is non persistent then it should not be used in future connections but it should be kept for current connection. And it should be removed when connecion is removed. Signed-off-by: Vishal Agarwal <vishal.agarwal@stericsson.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-08Bluetooth: fix conding style issues all over the treeGustavo F. Padovan1-57/+53
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-03-03Bluetooth: mgmt: Fix updating local name when powering onJohan Hedberg1-8/+0
When powering on we need to apply whatever name has been set through mgmt_set_local_name. The appropriate place for this is mgmt_powered() and not hci_setup() since this needs to be applied also if the HCI init sequence was already completed but the adapter was still "powered off" from a mgmt perspective due the the HCI_AUTO_OFF still being set. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-02Bluetooth: Fix clearing of HCI_PENDING_CLASS flagJohan Hedberg1-1/+1
When doing reset HCI_PENDING_CLASS is one of the flags that should be cleared (since it's used for a pending HCI command and a reset clear all pending commands). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-03-01Bluetooth: Fix coding style with breaking linesGustavo F. Padovan1-1/+2
Our limit is 80 and broken lines should as right as possible. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2012-02-29Bluetooth: Use NULL instead of integer for mgmt_device_connected paramSzymon Janc1-1/+1
Last param of mgmt_device_connected is of pointer type, so use NULL instead of 0 for it. This fix following sparse warning: CHECK net/bluetooth/hci_event.c net/bluetooth/hci_event.c:3262:74: warning: Using plain integer as NULL pointer Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-28Bluetooth: Use LMP_HOST_SSP define instead of magic valuesJohan Hedberg1-3/+3
This patch fixes the code to use the proper LMP_HOST_SSP define instead of magic values and thereby makes the code more readable. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-28Bluetooth: Remove redundant read_host_features commandsJohan Hedberg1-25/+34
Previously the write_le_enable would trigger a read_host_features command but since we have access to the value LE support was set to we can simply just clear or set the bit in hdev->host_features. This also removes a second unnecessary read_host_features command from the device initialization procedure since LE is only enabled after the first read_host_features command completes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-24Bluetooth: Fix init request completion with AMP controllersAndrei Emeltchenko1-1/+4
Mark request status as done for Read Local Version HCI command. In AMP initialization this HCI command is the last and needs to be completed. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-24Bluetooth: Fix init request completion with old controllersJohan Hedberg1-0/+2
With Bluetooth 1.1 controllers the last command in the HCI init sequence will be a write_local_name, however there was no callback to indicate init request completion in this case. This patch fixes the issue by adding the necessary callback to the write_local_name_complete handler. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Add flags parameter to device_connectedJohan Hedberg1-4/+4
This patch updates the Device Connected events to match the latest API by adding a flags parameter to them. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Set DISCOVERY_STOPPED if controller resetsAndre Guedes1-0/+2
If controller is reset during the discovery procedure, Start Discovery command stops working. This can be easily reproduced by running "hciconfig hci0 reset" while discovering devices, for instance. We should force discovery state to DISCOVERY_STOPPED in case we receive a reset command complete event. Otherwise we may stuck in one of the active discovery states (DISCOVERY_INQUIRY, DISCOVERY_LE_SCAN and DISCOVERY_RESOLVING) and subsequent Start Discovery commands will simply fail. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2012-02-23Bluetooth: mgmt: Add legacy pairing info to dev_found eventsJohan Hedberg1-12/+14
This patch makes sure that legacy pairing vs SSP infomation gets properly propageted to the device_found events in the form of the legacy pairing flag. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: mgmt: Allow local name changes while powered offJohan Hedberg1-3/+10
This patch makes it possible to set the local name before powering on the device. The name will be applied using the hci_write_local_name command once the device gets powered on. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
2012-02-23Bluetooth: Fix read_name updating when HCI_SETUP is not setJohan Hedberg1-1/+2
The local name should only be updated as a consequence of a hci_read_local_name if we are in the HCI_SETUP state. In all other scenarios it should only be updated through hci_write_local_name. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-08-12 15:28:36 +0000