summaryrefslogtreecommitdiffstats
path: root/net/batman-adv
AgeCommit message (Collapse)AuthorFilesLines
2019-03-25batman-adv: Drop license boilerplateSven Eckelmann61-733/+0
All files got a SPDX-License-Identifier with commit 7db7d9f369a4 ("batman-adv: Add SPDX license identifier above copyright header"). All the required information about the license conditions can be found in LICENSES/. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Fix genl notification for throughput_overrideSven Eckelmann1-2/+5
The throughput_override sysfs file is not below the meshif but below a hardif. The kobj has therefore not a pointer which can be used to find the batadv_priv data. The pointer stored in the hardif object must be used instead to find the correct meshif private data. Fixes: 7e6f461efe25 ("batman-adv: Trigger genl notification on sysfs config change") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: fix warning in function batadv_v_elp_get_throughputAnders Roxell1-2/+4
When CONFIG_CFG80211 isn't enabled the compiler correcly warns about 'sinfo.pertid' may be unused. It can also happen for other error conditions that it not warn about. net/batman-adv/bat_v_elp.c: In function ‘batadv_v_elp_get_throughput.isra.0’: include/net/cfg80211.h:6370:13: warning: ‘sinfo.pertid’ may be used uninitialized in this function [-Wmaybe-uninitialized] kfree(sinfo->pertid); ~~~~~^~~~~~~~ Rework so that we only release '&sinfo' if cfg80211_get_station returns zero. Fixes: 7d652669b61d ("batman-adv: release station info tidstats") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce tt_global hash refcnt only for removed entrySven Eckelmann1-3/+15
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_global_free is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 7683fdc1e886 ("batman-adv: protect the local and the global trans-tables with rcu") Reported-by: Martin Weinelt <martin@linuxlounge.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce tt_local hash refcnt only for removed entrySven Eckelmann1-5/+9
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_tt_local_remove is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: ef72706a0543 ("batman-adv: protect tt_local_entry from concurrent delete events") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-25batman-adv: Reduce claim hash refcnt only for removed entrySven Eckelmann1-3/+13
The batadv_hash_remove is a function which searches the hashtable for an entry using a needle, a hashtable bucket selection function and a compare function. It will lock the bucket list and delete an entry when the compare function matches it with the needle. It returns the pointer to the hlist_node which matches or NULL when no entry matches the needle. The batadv_bla_del_claim is not itself protected in anyway to avoid that any other function is modifying the hashtable between the search for the entry and the call to batadv_hash_remove. It can therefore happen that the entry either doesn't exist anymore or an entry was deleted which is not the same object as the needle. In such an situation, the reference counter (for the reference stored in the hashtable) must not be reduced for the needle. Instead the reference counter of the actually removed entry has to be reduced. Otherwise the reference counter will underflow and the object might be freed before all its references were dropped. The kref helpers reported this problem as: refcount_t: underflow; use-after-free. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-03-22genetlink: make policy common to familyJohannes Berg1-18/+1
Since maxattr is common, the policy can't really differ sanely, so make it common as well. The only user that did in fact manage to make a non-common policy is taskstats, which has to be really careful about it (since it's still using a common maxattr!). This is no longer supported, but we can fake it using pre_doit. This reduces the size of e.g. nl80211.o (which has lots of commands): text data bss dec hex filename 398745 14323 2240 415308 6564c net/wireless/nl80211.o (before) 397913 14331 2240 414484 65314 net/wireless/nl80211.o (after) -------------------------------- -832 +8 0 -824 Which is obviously just 8 bytes for each command, and an added 8 bytes for the new policy pointer. I'm not sure why the ops list is counted as .text though. Most of the code transformations were done using the following spatch: @ops@ identifier OPS; expression POLICY; @@ struct genl_ops OPS[] = { ..., { - .policy = POLICY, }, ... }; @@ identifier ops.OPS; expression ops.POLICY; identifier fam; expression M; @@ struct genl_family fam = { .ops = OPS, .maxattr = M, + .policy = POLICY, ... }; This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing the cb->data as ops, which we want to change in a later genl patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13Merge tag 'batadv-next-for-davem-20190213' of ↵David S. Miller8-142/+1020
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - fix memory leak in in batadv_dat_put_dhcp, by Martin Weinelt - fix typo, by Sven Eckelmann - netlink restructuring patch series (part 2), by Sven Eckelmann (19 patches) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-12batman-adv: fix uninit-value in batadv_interface_tx()Eric Dumazet1-0/+2
KMSAN reported batadv_interface_tx() was possibly using a garbage value [1] batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail. [1] BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-09batman-adv: Trigger genl notification on sysfs config changeSven Eckelmann3-16/+63
The generic netlink code is expected to trigger notification messages when configuration might have been changed. But the configuration of batman-adv is most of the time still done using sysfs. So the sysfs interface should also trigger the corresponding netlink messages via the "config" multicast group. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add throughput_override hardif genl configurationSven Eckelmann1-0/+12
The B.A.T.M.A.N. V implementation tries to estimate the link throughput of an interface to an originator using different automatic methods. It is still possible to overwrite it the link throughput for all reachable originators via this interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s. If the value is set to 0 then batman-adv will try to estimate the throughput by itself. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add elp_interval hardif genl configurationSven Eckelmann1-0/+17
The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface. The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add orig_interval mesh genl configurationSven Eckelmann1-0/+17
The OGM packets are transmitted every orig_interval milliseconds. This value can be changed using the configuration interface. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add network_coding mesh genl configurationSven Eckelmann1-0/+17
The mesh interface can use (in an homogeneous mesh) network coding, a mechanism that aims to increase the overall network throughput by fusing multiple packets in one transmission. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add multicast forceflood mesh genl configurationSven Eckelmann1-0/+15
The mesh interface can optimize the flooding of multicast packets based on the content of the global translation tables. To disable this behavior and use the broadcast-like flooding of the packets, forceflood has to be enabled. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero will disable this feature (allowing multicast optimizations) and setting it to something else is enabling this feature (forcing simple flooding). Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add log_level mesh genl configurationSven Eckelmann1-0/+17
In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add hop_penalty mesh genl configurationSven Eckelmann1-0/+11
The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced when they are forwarded. One of the reductions is the penalty for traversing an additional hop. This hop_penalty (0-255) defines the percentage of reduction (0-100%). The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY attribute. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add gateway mesh genl configurationSven Eckelmann6-8/+95
The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes: * u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server) * u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps) * u32 BATADV_ATTR_GW_SEL_CLASS Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add fragmentation mesh genl configurationSven Eckelmann1-0/+12
The mesh interface can fragment unicast packets when the packet size exceeds the outgoing slave/hard-interface MTU. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add distributed_arp_table mesh genl configurationSven Eckelmann1-0/+17
The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add bridge_loop_avoidance mesh genl configurationSven Eckelmann1-0/+17
The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add bonding mesh genl configurationSven Eckelmann1-0/+11
The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add ap_isolation mesh/vlan genl configurationSven Eckelmann1-0/+89
The mesh interface can drop messages between clients to implement a mesh-wide AP isolation. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. This feature also requires that skbuff which should be handled as isolated are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK and BATADV_ATTR_ISOLATION_MASK. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Add aggregated_ogms mesh genl configurationSven Eckelmann1-0/+12
The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for vlan genl configSven Eckelmann1-2/+189
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the VLANs on top of the mesh/soft-interface have configuration settings. The genl interface reflects this by allowing to get/set it using the vlan specific commands BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for hardif genl configSven Eckelmann1-21/+219
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands. The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific. The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Prepare framework for mesh genl configSven Eckelmann1-62/+98
The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested. The main objects for this configuration is the mesh/soft-interface object. Its actual object in memory already contains most of the available configuration settings. The genl interface reflects this by allowing to get/set it using the mesh specific commands. The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is reused as get command because it already provides the content of other information from the mesh/soft-interface which are not yet configuration specific. The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command message type that settings might have been changed and what the current values are. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-09batman-adv: Move common genl doit code pre/post hooksSven Eckelmann1-43/+100
The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks") intoduced a mechanism to run specific code for doit hooks before/after the hooks are run. Since all doit hooks are requiring the batadv softif, it should be retrieved/freed in these helpers to simplify the code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-2/+8
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06batman-adv: fix memory leak in in batadv_dat_put_dhcpMartin Weinelt1-0/+2
batadv_dat_put_dhcp is creating a new ARP packet via batadv_dat_arp_create_reply and tries to forward it via batadv_dat_send_data to different peers in the DHT. The original skb is not consumed by batadv_dat_send_data and thus has to be consumed by the caller. Fixes: b61ec31c8575 ("batman-adv: Snoop DHCPACKs for DAT") Signed-off-by: Martin Weinelt <martin@linuxlounge.net> [sven@narfation.org: add commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-02-01Merge tag 'batadv-next-for-davem-20190201' of ↵David S. Miller61-64/+493
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Add DHCPACKs for DAT snooping, by Linus Luessing - Update copyright years for 2019, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-01Merge tag 'batadv-net-for-davem-20190201' of git://git.open-mesh.org/linux-mergeDavid S. Miller3-2/+8
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Avoid WARN to report incorrect configuration, by Sven Eckelmann - Fix mac header position setting, by Sven Eckelmann - Fix releasing station statistics, by Felix Fietkau ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-25batman-adv: release station info tidstatsFelix Fietkau1-0/+3
With the addition of TXQ stats in the per-tid statistics the struct station_info grew significantly. This resulted in stack size warnings due to the structure itself being above the limit for the warnings. To work around this, the TID array was allocated dynamically. Also a function to free this content was introduced with commit 7ea3e110f2f8 ("cfg80211: release station info tidstats where needed") but the necessary changes were not provided for batman-adv's B.A.T.M.A.N. V implementation. Signed-off-by: Felix Fietkau <nbd@nbd.name> Fixes: 8689c051a201 ("cfg80211: dynamically allocate per-tid stats for station info") [sven@narfation.org: add commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-01-22bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() callsLinus Lüssing1-2/+2
This patch refactors ip_mc_check_igmp(), ipv6_mc_check_mld() and their callers (more precisely, the Linux bridge) to not rely on the skb_trimmed parameter anymore. An skb with its tail trimmed to the IP packet length was initially introduced for the following three reasons: 1) To be able to verify the ICMPv6 checksum. 2) To be able to distinguish the version of an IGMP or MLD query. They are distinguishable only by their size. 3) To avoid parsing data for an IGMPv3 or MLDv2 report that is beyond the IP packet but still within the skb. The first case still uses a cloned and potentially trimmed skb to verfiy. However, there is no need to propagate it to the caller. For the second and third case explicit IP packet length checks were added. This hopefully makes ip_mc_check_igmp() and ipv6_mc_check_mld() easier to read and verfiy, as well as easier to use. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04batman-adv: Update copyright years for 2019Sven Eckelmann61-61/+61
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds2-2/+2
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-31batman-adv: Force mac header to start of data on xmitSven Eckelmann1-0/+2
The caller of ndo_start_xmit may not already have called skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr therefore can be in the wrong position and even outside the current skbuff. This for example happens when the user binds to the device using a PF_PACKET-SOCK_RAW with enabled qdisc-bypass: int opt = 4; setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt)); Since eth_hdr is used all over the codebase, the batadv_interface_tx function must always take care of resetting it. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30batman-adv: Snoop DHCPACKs for DATLinus Lüssing4-2/+431
In a 1000 nodes mesh network (Freifunk Hamburg) we can still see 30KBit/s of ARP traffic (equalling about 25% of all layer two specific overhead, remaining after some filtering) flooded through the mesh. These 30KBit/s are mainly ARP Requests from the gateways / DHCP servers. By snooping DHCPACKs we can learn about MAC/IP address pairs in the DHCP range without relying on ARP. This patch is in preparation to eliminate the need for mesh wide message flooding for IPv4 address resolution. Also this allows to quickly update a MAC/IP pair at least in the DHT when DHCP reassigns an IP address to a new host. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30batman-adv: Avoid WARN on net_device without parent in netnsSven Eckelmann1-2/+3
It is not allowed to use WARN* helpers on potential incorrect input from the user or transient problems because systems configured as panic_on_warn will reboot due to such a problem. A NULL return value of __dev_get_by_index can be caused by various problems which can either be related to the system configuration or problems (incorrectly returned network namespaces) in other (virtual) net_device drivers. batman-adv should not cause a (harmful) WARN in this situation and instead only report it via a simple message. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-12-30batman-adv: Start new development cycleSimon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-3/+5
2018-11-12batman-adv: enable MCAST by default at compile timeLinus Lüssing1-0/+1
Thanks to rigorous testing in wireless community mesh networks several issues with multicast entries in the translation table were found and fixed in the last 1.5 years. Now we see the first larger networks (a few hundred nodes) with a batman-adv version with multicast optimizations enabled arising, with no TT / multicast optimization related issues so far. Therefore it seems safe to enable multicast optimizations by default. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Move CRC16 dependency to BATMAN_ADV_BLASven Eckelmann1-1/+1
The commit ced72933a5e8 ("batman-adv: use CRC32C instead of CRC16 in TT code") switched the translation table code from crc16 to crc32c. The (optional) bridge loop avoidance code is the only user of this function. batman-adv should only select CRC16 when it is actually using it. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent multicast netlink dump detectionSven Eckelmann1-23/+28
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent local TT netlink dump detectionSven Eckelmann1-18/+23
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent dat netlink dump detectionSven Eckelmann1-19/+23
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent claim netlink dump detectionSven Eckelmann1-18/+23
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Add inconsistent backbone netlink dump detectionSven Eckelmann1-18/+23
The netlink dump functionality transfers a large number of entries from the kernel to userspace. It is rather likely that the transfer has to interrupted and later continued. During that time, it can happen that either new entries are added or removed. The userspace could than either receive some entries multiple times or miss entries. Commit 670dc2833d14 ("netlink: advertise incomplete dumps") introduced a mechanism to inform userspace about this problem. Userspace can then decide whether it is necessary or not to retry dumping the information again. The netlink dump functions have to be switched to exclusive locks to avoid changes while the current message is prepared. The already existing generation sequence counter from the hash helper can be used for this simple hash. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2018-11-12batman-adv: Store modification counter via hash helpersSven Eckelmann2-0/+8
Multiple datastructures use the hash helper functions to add and remove entries from the simple hlist based hashes. These are often also dumped to userspace via netlink and thus should have a generation sequence counter. Reported-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 16:38:58 +0000