summaryrefslogtreecommitdiffstats
path: root/net/batman-adv/distributed-arp-table.c
AgeCommit message (Collapse)AuthorFilesLines
2016-10-30batman-adv: Add wrapper for ARP reply creationLinus Lüssing1-27/+40
Removing duplicate code. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-10-17batman-adv: remove unsed argument from batadv_dbg_arp() functionAntonio Quartulli1-11/+6
The argument "type" passed to the batadv_dbg_arp() function is never used. Remove it. Signed-off-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Allow to disable debugfs supportSven Eckelmann1-0/+2
The files provided by batman-adv via debugfs are currently converted to netlink. Tools which are not yet converted to use the netlink interface may still rely on the old debugfs files. But systems which already upgraded their tools can save some space by disabling this feature. The default configuration of batman-adv on amd64 can reduce the size of the module by around 11% when this feature is disabled. $ size net/batman-adv/batman-adv.ko* text data bss dec hex filename 150507 10395 4160 165062 284c6 net/batman-adv/batman-adv.ko.y 137106 7099 2112 146317 23b8d net/batman-adv/batman-adv.ko.n Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-09batman-adv: Place kref_get for dat_entry near useSven Eckelmann1-1/+1
It is hard to understand why the refcnt is increased when it isn't done near the actual place the new reference is used. So using kref_get right before the place which requires the reference and in the same function helps to avoid accidental problems caused by incorrect reference counting. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+8
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05batman-adv: Avoid nullptr dereference in dat after vlan_insert_tagSven Eckelmann1-2/+8
vlan_insert_tag can return NULL on errors. The distributed arp table code therefore has to check the return value of vlan_insert_tag for NULL before it can safely operate on this pointer. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: Consolidate logging related functionsSven Eckelmann1-0/+1
There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-06-30batman-adv: split tvlv into a separate fileMarkus Pargmann1-0/+1
The tvlv functionality in main.c is mostly unrelated to the rest of the content. It still takes up a large portion of this source file (~45%, 588 lines). Moving it to a separate file makes it better visible as a main component of the batman-adv implementation and hides it less in the other helper functions in main.c Signed-off-by: Markus Pargmann <mpa@pengutronix.de> [sven@narfation.org: fix conflicts with current version, fix includes, rewrote commit message] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann1-3/+3
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-4/+4
Antonio Quartulli says: ==================== pull request: batman-adv 20160504 In this pull request you have: - two changes to the MAINTAINERS file where one marks our mailing list as moderated and the other adds a missing documentation file - kernel-doc fixes - code refactoring and various cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04batman-adv: fix wrong names in kerneldocAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: Fix additional names] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-04batman-adv: use to_delayed_workGeliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-04batman-adv: use static string for table headersAntonio Quartulli1-2/+2
Use a static string when showing table headers rather then a nonsense parametric one with fixed arguments. It is easier to grep and it does not need to be recomputed at runtime each time. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-04-29batman-adv: fix DAT candidate selection (must use vid)Antonio Quartulli1-7/+10
Now that DAT is VLAN aware, it must use the VID when computing the DHT address of the candidate nodes where an entry is going to be stored/retrieved. Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-29batman-adv: keep track of when unicast packets are sentAntonio Quartulli1-3/+1
To enable ELP to send probing packets over wireless links only if needed, batman-adv must keep track of the last time it sent a unicast packet towards every neighbour. For this purpose a 2 main changes are introduced: 1) a new member of the elp_neigh_node structure stores the last time a unicast packet was sent towards this neighbour; 2) a wrapper function for sending unicast packets is implemented. This function will simply update the member describe din point 1) and then forward the packet to the real sending routine. Point 2) implies that any code-path leading to a unicast sending now has to use the new wrapper. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-02-23batman-adv: Rename batadv_dat_entry *_free_ref function to *_putSven Eckelmann1-8/+8
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_neigh_node *_free_ref function to *_putSven Eckelmann1-1/+1
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_hardif *_free_ref function to *_putSven Eckelmann1-1/+1
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-23batman-adv: Rename batadv_orig_node *_free_ref function to *_putSven Eckelmann1-2/+2
The batman-adv source code is the only place in the kernel which uses the *_free_ref naming scheme for the *_put functions. Changing it to *_put makes it more consistent and makes it easier to understand the connection to the *_get functions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_orig_node to krefSven Eckelmann1-1/+1
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-10batman-adv: Convert batadv_dat_entry to krefSven Eckelmann1-6/+21
batman-adv uses a self-written reference implementation which is just based on atomic_t. This is less obvious when reading the code than kref and therefore increases the change that the reference counting will be missed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: update copyright years for 2016Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: fix kerneldoc for DAT functionsAntonio Quartulli1-0/+4
Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-02-02batman-adv: Fix kerneldoc parsing of return descriptionSven Eckelmann1-18/+19
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2015-12-07batman-adv: Fix invalid stack access in batadv_dat_select_candidatesSven Eckelmann1-1/+4
batadv_dat_select_candidates provides an u32 to batadv_hash_dat but it needs a batadv_dat_entry with at least ip and vid filled in. Fixes: 3e26722bc9f2 ("batman-adv: make the Distributed ARP Table vlan aware") Signed-off-by: Sven Eckelmann <sven@open-mesh.com> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Remove multiple assignment per lineSven Eckelmann1-1/+2
The Linux CodingStyle disallows multiple assignments in a single line. (see chapter 1) Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Replace C99 int types with kernel typeSven Eckelmann1-30/+29
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-17Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-3/+4
Antonio Quartulli says: ==================== Included changes: - avoid integer overflow in GW selection routine - prevent race condition by making capability bit changes atomic (use clear/set/test_bit) - fix synchronization issue in mcast tvlv handler - fix crash on double list removal of TT Request objects - fix leak by puring packets enqueued for sending upon iface removal - ensure network header pointer is set in skb ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-14batman-adv: Make DAT capability changes atomicLinus Lüssing1-3/+4
Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 17cf0ea455f1 ("batman-adv: tvlv - add distributed arp table container") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-05batman-adv: avoid DAT to mess up LAN stateAntonio Quartulli1-5/+13
When a node running DAT receives an ARP request from the LAN for the first time, it is likely that this node will request the ARP entry through the distributed ARP table (DAT) in the mesh. Once a DAT reply is received the asking node must check if the MAC address for which the IP address has been asked is local. If it is, the node must drop the ARP reply bceause the client should have replied on its own locally. Forwarding this reply means fooling any L2 bridge (e.g. Ethernet switches) lying between the batman-adv node and the LAN. This happens because the L2 bridge will think that the client sending the ARP reply lies somewhere in the mesh, while this node is sitting in the same LAN. Reported-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann1-5/+23
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Use common Jenkins Hash implementationSven Eckelmann1-2/+15
An unoptimized version of the Jenkins one-at-a-time hash function is used and partially copied all over the code wherever an hashtable is used. Instead the optimized version shared between the whole kernel should be used to reduce code duplication and use better optimized code. Only the DAT code must use the old implementation because it is used as distributed hash function which has to be common for all nodes. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: checkpatch - Please use a blank line after declarationsAntonio Quartulli1-0/+1
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-08-04batman-adv: prefer kmalloc_array to kmalloc when possibleAntonio Quartulli1-1/+2
Reported by checkpatch with the following warning: WARNING: Prefer kmalloc_array over kmalloc with multiply Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-06-11net: add __pskb_copy_fclone and pskb_copy_for_cloneOctavian Purdila1-1/+1
There are several instances where a pskb_copy or __pskb_copy is immediately followed by an skb_clone. Add a couple of new functions to allow the copy skb to be allocated from the fclone cache and thus speed up subsequent skb_clone calls. Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <antonio@meshcoding.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Cc: Patrick McHardy <kaber@trash.net> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Reviewed-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18batman-adv: add blank line between declarations and the rest of the codeAntonio Quartulli1-0/+1
Reported by checkpatch with the following message: "WARNING: Missing a blank line after declarations" Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-05-15batman-adv: fix local TT check for outgoing arp requests in DATAntonio Quartulli1-2/+1
Change introduced by 88e48d7b3340ef07b108eb8a8b3813dd093cc7f7 ("batman-adv: make DAT drop ARP requests targeting local clients") implements a check that prevents DAT from using the caching mechanism when the client that is supposed to provide a reply to an arp request is local. However change brought by be1db4f6615b5e6156c807ea8985171c215c2d57 ("batman-adv: make the Distributed ARP Table vlan aware") has not converted the above check into its vlan aware version thus making it useless when the local client is behind a vlan. Fix the behaviour by properly specifying the vlan when checking for a client being local or not. Reported-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-22batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli1-2/+2
On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-03-22batman-adv: use vlan_/eth_hdr() instead of skb->data in interface_tx pathLinus Lüssing1-0/+5
Our .ndo_start_xmit handler (batadv_interface_tx()) can rely on having the skb mac header pointer set correctly since the following commit present in kernels >= 3.9: "net: reset mac header in dev_start_xmit()" (6d1ccff627) Therefore we can safely use eth_hdr() and vlan_eth_hdr() instead of skb->data now, which spares us some ugly type casts. At the same time set the mac_header in batadv_dat_snoop_incoming_arp_request() before sending the skb along the TX path. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split out router from orig_nodeSimon Wunderlich1-1/+2
For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: send every DHCP packet as bat-unicastAntonio Quartulli1-2/+2
In different situations it is possible that the DHCP server or client uses broadcast Ethernet frames to send messages to each other. The GW component in batman-adv takes care of using bat-unicast packets to bring broadcast DHCP Discover/Requests to the "best" server. On the way back the DHCP server usually sends unicasts, but upon client request it may decide to use broadcasts as well. This patch improves the GW component so that it now snoops and sends as unicast all the DHCP packets, no matter if they were generated by a DHCP server or client. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08batman-adv: remove parenthesis from return statementsAntonio Quartulli1-1/+1
Remove parenthesis around return expression as suggested by checkpatch. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli1-3/+1
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich1-3/+3
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19batman-adv: refine API calls for unicast transmissions of SKBsLinus Lüssing1-5/+5
With this patch the functions batadv_send_skb_unicast() and batadv_send_skb_unicast_4addr() are further refined into batadv_send_skb_via_tt(), batadv_send_skb_via_tt_4addr() and batadv_send_skb_via_gw(). This way we avoid any "guessing" about where to send a packet in the unicast forwarding methods and let the callers decide. This is going to be useful for the upcoming multicast related patches in particular. Further, the return values were polished a little to use the more appropriate NET_XMIT_* defines. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19batman-adv: make the Distributed ARP Table vlan awareAntonio Quartulli1-48/+105
The same IP subnet can be used on different VLANs, therefore DAT has to differentiate whether the IP to resolve belongs to one or the other virtual LAN. To accomplish this task DAT has to deal with the VLAN tag and store it together with each ARP entry. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: add the VLAN ID attribute to the TT entryAntonio Quartulli1-4/+7
To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>