summaryrefslogtreecommitdiffstats
path: root/net/batman-adv/bat_iv_ogm.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-27batman-adv: rearrange batadv_neigh_node_new() arguments to follow conventionMarek Lindner1-1/+1
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: move neigh_node list add into batadv_neigh_node_new()Marek Lindner1-20/+1
All batadv_neigh_node_* functions expect the neigh_node list item to be part of the orig_node->neigh_list, therefore the constructor of said list item should be adding the newly created neigh_node to the respective list. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: remove redundant hard_iface assignmentMarek Lindner1-1/+0
The batadv_neigh_node_new() function already sets the hard_iface pointer. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-27batman-adv: move hardif refcount inc to batadv_neigh_node_new()Marek Lindner1-6/+0
The batadv_neigh_node cleanup function 'batadv_neigh_node_free_rcu()' takes care of reducing the hardif refcounter, hence it's only logical to assume the creating function of that same object 'batadv_neigh_node_new()' takes care of increasing the same refcounter. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Acked-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Fix conditional statements indentationSven Eckelmann1-1/+1
commit 29b9256e6631 ("batman-adv: consider outgoing interface in OGM sending") incorrectly indented the interface check code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Remove multiple assignment per lineSven Eckelmann1-2/+4
The Linux CodingStyle disallows multiple assignments in a single line. (see chapter 1) Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-08-25batman-adv: Replace C99 int types with kernel typeSven Eckelmann1-48/+46
(s|u)(8|16|32|64) are the preferred types in the kernel. The use of the standard C99 types u?int(8|16|32|64)_t are objected by some people and even checkpatch now warns about using them. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-06-07batman-adv: Clarify calculation precedence for '&' and '?'Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-07batman-adv: Add required includes to all filesSven Eckelmann1-6/+36
The header files could not be build indepdent from each other. This is happened because headers didn't include the files for things they've used. This was problematic because the success of a build depended on the knowledge about the right order of local includes. Also source files were not including everything they've used explicitly. Instead they required that transitive includes are always stable. This is problematic because some transitive includes are not obvious, depend on config settings and may not be stable in the future. The order for include blocks are: * primary headers (main.h and the *.h file of a *.c file) * global linux headers * required local headers * extra forward declarations for pointers in function/struct declarations The only exceptions are linux/bitops.h and linux/if_ether.h in packet.h. This header file is shared with userspace applications like batctl and must therefore build together with userspace applications. The header linux/bitops.h is not part of the uapi headers and linux/if_ether.h conflicts with the musl implementation of netinet/if_ether.h. The maintainers rejected the use of __KERNEL__ preprocessor checks and thus these two headers are only in main.h. All files using packet.h first have to include main.h to work correctly. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: Remove unnecessary check for orig_ifinfo not NULLSven Eckelmann1-2/+1
orig_ifinfo is dereferenced multiple times in batadv_iv_ogm_update_seqnos before the check for NULL is done. The function also exists at the beginning when orig_ifinfo would have been NULL. This makes the check at the end unnecessary and only confuses the reader/code analyzers. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: iv_ogm, fix comment function nameMarkus Pargmann1-1/+1
This is a small copy paste fix for batadv_ing_buffer_avg. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: iv_ogm, fix coding styleMarkus Pargmann1-1/+3
The kernel coding style says, that there should not be multiple assignments in one row. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: iv_ogm, Fix dup_status commentMarkus Pargmann1-1/+1
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: iv_ogm_orig_update, style, add missing bracketsMarkus Pargmann1-1/+2
CodingStyle describes that either none or both branches of a conditional have to have brackets. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: iv_ogm_queue_add, Simplify expressionsMarkus Pargmann1-2/+2
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-06-03batman-adv: iv_ogm_aggregate_new, simplify error handlingMarkus Pargmann1-15/+13
It is just a bit easier to put the error handling at one place and let multiple error paths use the same calls. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_orig_update, remove unnecessary bracketsMarkus Pargmann1-1/+1
Remove these unnecessary brackets inside a condition. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_can_aggregate, code readabilityMarkus Pargmann1-49/+53
This patch tries to increase code readability by negating the first if block and rearranging some of the other conditional blocks. This way we save an indentation level, we also save some allocation that is not necessary for one of the conditions. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_send_to_if, declare char* as constMarkus Pargmann1-1/+1
This string pointer is later assigned to a constant string, so it should be defined constant at the beginning. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_aggr_packet, bool return valueMarkus Pargmann1-2/+2
This function returns bool values, so it should be defined to return them instead of the whole int range. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: iv_ogm_iface_enable, direct return valuesMarkus Pargmann1-6/+2
Directly return error values. No need to use a return variable. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-05-29batman-adv: update copyright years for 2015Sven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: checkpatch - remove unnecessary parenthesesAntonio Quartulli1-2/+2
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: checkpatch - Please don't use multiple blank linesAntonio Quartulli1-2/+0
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: kernel doc fixes for bat_iv_ogm.cMartin Hundebøll1-4/+5
Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-08-04batman-adv: prefer kmalloc_array to kmalloc when possibleAntonio Quartulli1-6/+7
Reported by checkpatch with the following warning: WARNING: Prefer kmalloc_array over kmalloc with multiply Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-05-10batman-adv: fix neigh_ifinfo imbalanceSimon Wunderlich1-0/+2
The neigh_ifinfo object must be freed if it has been used in batadv_iv_ogm_process_per_outif(). This is a regression introduced by 89652331c00f43574515059ecbf262d26d885717 ("batman-adv: split tq information in neigh_node struct") Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli1-5/+5
On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-02-17batman-adv: avoid double free when orig_node initialization failsAntonio Quartulli1-4/+2
In the failure path of the orig_node initialization routine the orig_node->bat_iv.bcast_own field is free'd twice: first in batadv_iv_ogm_orig_get() and then later in batadv_orig_node_free_rcu(). Fix it by removing the kfree in batadv_iv_ogm_orig_get(). Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-02-17batman-adv: fix potential orig_node reference leakSimon Wunderlich1-0/+2
Since batadv_orig_node_new() sets the refcount to two, assuming that the calling function will use a reference for putting the orig_node into a hash or similar, both references must be freed if initialization of the orig_node fails. Otherwise that object may be leaked in that error case. Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-02-17batman-adv: avoid potential race condition when adding a new neighbourAntonio Quartulli1-6/+16
When adding a new neighbour it is important to atomically perform the following: - check if the neighbour already exists - append the neighbour to the proper list If the two operations are not performed in an atomic context it is possible that two concurrent insertions add the same neighbour twice. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-16batman-adv: use consistent kerneldoc styleSimon Wunderlich1-2/+4
Reported-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add debugfs support to view multiif tablesSimon Wunderlich1-5/+7
Show tables for the multi interface operation. Originator tables are added per hard interface. This patch also changes the API by adding the interface to the bat_orig_print() parameters. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: consider outgoing interface in OGM sendingSimon Wunderlich1-57/+96
The current OGM sending an aggregation functionality decides on which interfaces a packet should be sent when it parses the forward packet struct. However, with the network wide multi interface optimization the outgoing interface is decided by the OGM processing function. This is reflected by moving the decision in the OGM processing function and add the outgoing interface in the forwarding packet struct. This practically implies that an OGM may be added multiple times (once per outgoing interface), and this also affects aggregation which needs to consider the outgoing interface as well. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add WiFi penaltySimon Wunderlich1-5/+22
If the same interface is used for sending and receiving, there might be throughput degradation on half-duplex interfaces such as WiFi. Add a penalty if the same interface is used to reflect this problem in the metric. At the same time, change the hop penalty from 30 to 15 so there will be no change for single wifi mesh network. the effective hop penalty will stay at 30 due to the new wifi penalty for these networks. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split out router from orig_nodeSimon Wunderlich1-185/+269
For the network wide multi interface optimization there are different routers for each outgoing interface (outgoing from the OGM perspective, incoming for payload traffic). To reflect this, change the router and associated data to a list of routers. While at it, rename batadv_orig_node_get_router() to batadv_orig_router_get() to follow the new naming scheme. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: split tq information in neigh_node structSimon Wunderlich1-55/+212
For the network wide multi interface optimization it is required to save metrics per outgoing interface in one neighbor. Therefore a new type is introduced to keep interface-specific information. This also requires some changes in access and list management. The compare and equiv_or_better API calls are changed to take the outgoing interface into consideration. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: remove bonding and interface alternatingSimon Wunderlich1-5/+0
Remove bonding and interface alternating code - it will be replaced by a new, network-wide multi interface optimization which enables both bonding and interface alternating in a better way. Keep the sysfs and find router function though, this will be needed later. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli1-3/+1
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich1-18/+18
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23batman-adv: provide orig_node routing APIAntonio Quartulli1-0/+126
Some operations executed on an orig_node depends on the current routing algorithm being used. To easily make this mechanism routing algorithm agnostic add a orig_node specific API that each algorithm can populate with its own routines. Such routines are then invoked by the code when needed, without knowing which routing algorithm is currently in use With this patch 3 API functions are added: - orig_free (to free routing depending internal structs) - orig_add_if (to change the inner state of an orig_node when a new hard interface is added) - orig_del_if (to change the inner state of an orig_node when an hard interface is removed) Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: adapt bonding to use the new API functionsAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: add bat_neigh_is_equiv_or_better API functionAntonio Quartulli1-0/+18
Each routing protocol has its own metric semantic and therefore is the protocol itself the only component able to compare two metrics to check their "similarity". This new API allows each routing protocol to implement its own logic and make the external code protocol agnostic. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: add bat_neigh_cmp API functionAntonio Quartulli1-0/+20
This new API allows to compare the two neighbours based on the metric avoiding the user to deal with any routing algorithm specific detail Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: add bat_orig_print API functionAntonio Quartulli1-0/+65
Each routing protocol has its own metric and private variables, therefore it is useful to introduce a new API for originator information printing. This API needs to be implemented by each protocol in order to provide its specific originator table output. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: make struct batadv_orig_node algorithm agnosticAntonio Quartulli1-27/+81
some of the struct batadv_orig_node members are B.A.T.M.A.N. IV specific and therefore they are moved in a algorithm specific substruct in order to make batadv_orig_node routing algorithm agnostic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: make struct batadv_neigh_node algorithm agnosticAntonio Quartulli1-27/+33
some of the fields in struct batadv_neigh_node are strictly related to the B.A.T.M.A.N. IV algorithm. In order to make the struct usable by any routing algorithm it has to be split and made more generic Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-09batman-adv: remove vis functionalitySimon Wunderlich1-8/+0
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - convert tt data sent within OGMsMarek Lindner1-30/+14
The translation table meta data (version number, crc checksum, etc) as well as the translation table diff propgated within OGMs now uses the newly introduced tvlv infrastructure. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 18:29:41 +0000