| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Recently there has been introduced a page bulk allocator for users which
need to get number of pages per one call request.
For order-0 pages switch to an alloc_pages_bulk_array_node() instead of
alloc_pages_node(), the reason is the former is not capable of allocating
set of pages, thus a one call is per one page.
Second, according to my tests the bulk allocator uses less cycles even for
scenarios when only one page is requested. Running the "perf" on same
test case shows below difference:
<default>
- 45.18% __vmalloc_node
- __vmalloc_node_range
- 35.60% __alloc_pages
- get_page_from_freelist
3.36% __list_del_entry_valid
3.00% check_preemption_disabled
1.42% prep_new_page
<default>
<patch>
- 31.00% __vmalloc_node
- __vmalloc_node_range
- 14.48% __alloc_pages_bulk
3.22% __list_del_entry_valid
- 0.83% __alloc_pages
get_page_from_freelist
<patch>
The "test_vmalloc.sh" also shows performance improvements:
fix_size_alloc_test_4MB loops: 1000000 avg: 89105095 usec
fix_size_alloc_test loops: 1000000 avg: 513672 usec
full_fit_alloc_test loops: 1000000 avg: 748900 usec
long_busy_list_alloc_test loops: 1000000 avg: 8043038 usec
random_size_alloc_test loops: 1000000 avg: 4028582 usec
fix_align_alloc_test loops: 1000000 avg: 1457671 usec
fix_size_alloc_test_4MB loops: 1000000 avg: 62083711 usec
fix_size_alloc_test loops: 1000000 avg: 449207 usec
full_fit_alloc_test loops: 1000000 avg: 735985 usec
long_busy_list_alloc_test loops: 1000000 avg: 5176052 usec
random_size_alloc_test loops: 1000000 avg: 2589252 usec
fix_align_alloc_test loops: 1000000 avg: 1365009 usec
For example 4MB allocations illustrates ~30% gain, all the
rest is also better.
Link: https://lkml.kernel.org/r/20210516202056.2120-3-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(), which makes
the code a bit shorter and easier to read.
Link: https://lkml.kernel.org/r/20210524112852.34716-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
vma_lookup() finds the vma of a specific address with a cleaner interface
and is more readable.
Link: https://lkml.kernel.org/r/20210521174745.2219620-23-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-22-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-21-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-20-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use vma_lookup() to find the VMA at a specific address. As vma_lookup()
will return NULL if the address is not within any VMA, the start address
no longer needs to be validated.
Link: https://lkml.kernel.org/r/20210521174745.2219620-19-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the return value in comment of finish_mkwrite_fault().
Link: https://lkml.kernel.org/r/20210513093931.15234-1-liu.xiang@zlingsmart.com
Signed-off-by: Liu Xiang <liu.xiang@zlingsmart.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using find_vma_intersection() avoids the need for a temporary variable and
makes the code cleaner.
Link: https://lkml.kernel.org/r/20210511014328.2902782-1-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both __do_munmap() and exit_mmap() unlock a range of VMAs using almost
identical code blocks. Replace both blocks by a static inline function.
[akpm@linux-foundation.org: tweak code layout]
Link: https://lkml.kernel.org/r/20210510211021.2797427-1-Liam.Howlett@Oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Logic of find_vma_intersection() is repeated in __do_munmap().
Also, prev is assigned a value before checking vma->vm_start >= end which
might end up on a return statement making that assignment useless.
Calling find_vma_intersection() checks that condition and returns NULL if
no vma is found, hence only the !vma check is needed in __do_munmap().
Link: https://lkml.kernel.org/r/20210409162129.18313-1-gmjuareztello@gmail.com
Signed-off-by: Gonzalo Matias Juarez Tello <gmjuareztello@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's also remove masking off MAP_EXECUTABLE from ksys_mmap_pgoff(): the
last in-tree occurrence of MAP_EXECUTABLE is now in LEGACY_MAP_MASK, which
accepts the flag e.g., for MAP_SHARED_VALIDATE; however, the flag is
ignored throughout the kernel now.
Add a comment to LEGACY_MAP_MASK stating that MAP_EXECUTABLE is ignored.
Link: https://lkml.kernel.org/r/20210421093453.6904-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kevin Brodsky <Kevin.Brodsky@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current code only associates with the existing blkcg when aio is used
to access the backing file. This patch covers all types of i/o to the
backing file and also associates the memcg so if the backing file is on
tmpfs, memory is charged appropriately.
This patch also exports cgroup_get_e_css and int_active_memcg so it can be
used by the loop module.
Link: https://lkml.kernel.org/r/20210610173944.1203706-4-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
set_active_memcg() worked for kernel allocations but was silently ignored
for user pages.
This patch establishes a precedence order for who gets charged:
1. If there is a memcg associated with the page already, that memcg is
charged. This happens during swapin.
2. If an explicit mm is passed, mm->memcg is charged. This happens
during page faults, which can be triggered in remote VMs (eg gup).
3. Otherwise consult the current process context. If there is an
active_memcg, use that. Otherwise, current->mm->memcg.
Previously, if a NULL mm was passed to mem_cgroup_charge (case 3) it would
always charge the root cgroup. Now it looks up the active_memcg first
(falling back to charging the root cgroup if not set).
Link: https://lkml.kernel.org/r/20210610173944.1203706-3-schatzberg.dan@gmail.com
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The noinline_for_stack is introduced by commit 666356297ec4 ("vmscan: set
up pagevec as late as possible in shrink_inactive_list()"), its purpose is
to delay the allocation of pagevec as late as possible to save stack
memory. But the commit 2bcf88796381 ("mm: take pagevecs off reclaim
stack") replace pagevecs by lists of pages_to_free. So we do not need
noinline_for_stack, just remove it (let the compiler decide whether to
inline).
Link: https://lkml.kernel.org/r/20210417043538.9793-9-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The css_set_lock is used to guard the list of inherited objcgs. So there
is no need to uncharge kernel memory under css_set_lock. Just move it out
of the lock.
Link: https://lkml.kernel.org/r/20210417043538.9793-8-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The obj_cgroup_release() and memcg_reparent_objcgs() are serialized by the
css_set_lock. We do not need to care about objcg->memcg being released in
the process of obj_cgroup_release(). So there is no need to pin memcg
before releasing objcg. Remove those pinning logic to simplfy the code.
There are only two places that modifies the objcg->memcg. One is the
initialization to objcg->memcg in the memcg_online_kmem(), another is
objcgs reparenting in the memcg_reparent_objcgs(). It is also impossible
for the two to run in parallel. So xchg() is unnecessary and it is enough
to use WRITE_ONCE().
Link: https://lkml.kernel.org/r/20210417043538.9793-7-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
lruvec_holds_page_lru_lock() doesn't check anything about locking and is
used to check whether the page belongs to the lruvec. So rename it to
page_matches_lruvec().
Link: https://lkml.kernel.org/r/20210417043538.9793-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All the callers of mem_cgroup_page_lruvec() just pass page_pgdat(page) as
the 2nd parameter to it (except isolate_migratepages_block()). But for
isolate_migratepages_block(), the page_pgdat(page) is also equal to the
local variable of @pgdat. So mem_cgroup_page_lruvec() do not need the
pgdat parameter. Just remove it to simplify the code.
Link: https://lkml.kernel.org/r/20210417043538.9793-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When mm is NULL, we do not need to hold rcu lock and call css_tryget for
the root memcg. And we also do not need to check !mm in every loop of
while. So bail out early when !mm.
Link: https://lkml.kernel.org/r/20210417043538.9793-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "memcontrol code cleanup and simplification", v3.
This patch (of 8):
The pages aren't accounted at the root level, so do not charge the page to
the root memcg in page replacement. Although we do not display the value
(mem_cgroup_usage) so there shouldn't be any actual problem, but there is
a WARN_ON_ONCE in the page_counter_cancel(). Who knows if it will
trigger? So it is better to fix it.
Link: https://lkml.kernel.org/r/20210417043538.9793-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210417043538.9793-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The below scenario can cause the page counters of the root_mem_cgroup to
be out of balance.
CPU0: CPU1:
objcg = get_obj_cgroup_from_current()
obj_cgroup_charge_pages(objcg)
memcg_reparent_objcgs()
// reparent to root_mem_cgroup
WRITE_ONCE(iter->memcg, parent)
// memcg == root_mem_cgroup
memcg = get_mem_cgroup_from_objcg(objcg)
// do not charge to the root_mem_cgroup
try_charge(memcg)
obj_cgroup_uncharge_pages(objcg)
memcg = get_mem_cgroup_from_objcg(objcg)
// uncharge from the root_mem_cgroup
refill_stock(memcg)
drain_stock(memcg)
page_counter_uncharge(&memcg->memory)
get_obj_cgroup_from_current() never returns a root_mem_cgroup's objcg, so
we never explicitly charge the root_mem_cgroup. And it's not going to
change. It's all about a race when we got an obj_cgroup pointing at some
non-root memcg, but before we were able to charge it, the cgroup was gone,
objcg was reparented to the root and so we're skipping the charging. Then
we store the objcg pointer and later use to uncharge the root_mem_cgroup.
This can cause the page counter to be less than the actual value.
Although we do not display the value (mem_cgroup_usage) so there shouldn't
be any actual problem, but there is a WARN_ON_ONCE in the
page_counter_cancel(). Who knows if it will trigger? So it is better to
fix it.
Link: https://lkml.kernel.org/r/20210425075410.19255-1-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The KMALLOC_NORMAL (kmalloc-<n>) caches are for unaccounted objects only
when CONFIG_MEMCG_KMEM is enabled. To make sure that this condition
remains true, we will have to prevent KMALOC_NORMAL caches to merge with
other kmem caches. This is now done by setting its refcount to -1 right
after its creation.
Link: https://lkml.kernel.org/r/20210505200610.13943-4-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Suggested-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are currently two problems in the way the objcg pointer array
(memcg_data) in the page structure is being allocated and freed.
On its allocation, it is possible that the allocated objcg pointer
array comes from the same slab that requires memory accounting. If this
happens, the slab will never become empty again as there is at least
one object left (the obj_cgroup array) in the slab.
When it is freed, the objcg pointer array object may be the last one
in its slab and hence causes kfree() to be called again. With the
right workload, the slab cache may be set up in a way that allows the
recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system.
One way to solve this problem is to split the kmalloc-<n> caches
(KMALLOC_NORMAL) into two separate sets - a new set of kmalloc-<n>
(KMALLOC_NORMAL) caches for unaccounted objects only and a new set of
kmalloc-cg-<n> (KMALLOC_CGROUP) caches for accounted objects only. All
the other caches can still allow a mix of accounted and unaccounted
objects.
With this change, all the objcg pointer array objects will come from
KMALLOC_NORMAL caches which won't have their objcg pointer arrays. So
both the recursive kfree() problem and non-freeable slab problem are
gone.
Since both the KMALLOC_NORMAL and KMALLOC_CGROUP caches no longer have
mixed accounted and unaccounted objects, this will slightly reduce the
number of objcg pointer arrays that need to be allocated and save a bit
of memory. On the other hand, creating a new set of kmalloc caches does
have the effect of reducing cache utilization. So it is properly a wash.
The new KMALLOC_CGROUP is added between KMALLOC_NORMAL and
KMALLOC_RECLAIM so that the first for loop in create_kmalloc_caches()
will include the newly added caches without change.
[vbabka@suse.cz: don't create kmalloc-cg caches with cgroup.memory=nokmem]
Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com
[akpm@linux-foundation.org: un-fat-finger v5 delta creation]
[longman@redhat.com: disable cache merging for KMALLOC_NORMAL caches]
Link: https://lkml.kernel.org/r/20210505200610.13943-4-longman@redhat.com
Link: https://lkml.kernel.org/r/20210512145107.6208-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
[longman@redhat.com: fix for CONFIG_ZONE_DMA=n]
Suggested-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: memcg/slab: Fix objcg pointer array handling problem", v4.
Since the merging of the new slab memory controller in v5.9, the page
structure stores a pointer to objcg pointer array for slab pages. When
the slab has no used objects, it can be freed in free_slab() which will
call kfree() to free the objcg pointer array in
memcg_alloc_page_obj_cgroups(). If it happens that the objcg pointer
array is the last used object in its slab, that slab may then be freed
which may caused kfree() to be called again.
With the right workload, the slab cache may be set up in a way that allows
the recursive kfree() calling loop to nest deep enough to cause a kernel
stack overflow and panic the system. In fact, we have a reproducer that
can cause kernel stack overflow on a s390 system involving kmalloc-rcl-256
and kmalloc-rcl-128 slabs with the following kfree() loop recursively
called 74 times:
[ 285.520739] [<000000000ec432fc>] kfree+0x4bc/0x560 [ 285.520740]
[<000000000ec43466>] __free_slab+0xc6/0x228 [ 285.520741]
[<000000000ec41fc2>] __slab_free+0x3c2/0x3e0 [ 285.520742]
[<000000000ec432fc>] kfree+0x4bc/0x560 : While investigating this issue, I
also found an issue on the allocation side. If the objcg pointer array
happen to come from the same slab or a circular dependency linkage is
formed with multiple slabs, those affected slabs can never be freed again.
This patch series addresses these two issues by introducing a new set of
kmalloc-cg-<n> caches split from kmalloc-<n> caches. The new set will
only contain non-reclaimable and non-dma objects that are accounted in
memory cgroups whereas the old set are now for unaccounted objects only.
By making this split, all the objcg pointer arrays will come from the
kmalloc-<n> caches, but those caches will never hold any objcg pointer
array. As a result, deeply nested kfree() call and the unfreeable slab
problems are now gone.
This patch (of 4):
Since the merging of the new slab memory controller in v5.9, the page
structure may store a pointer to obj_cgroup pointer array for slab pages.
Currently, only the __GFP_ACCOUNT bit is masked off. However, the array
is not readily reclaimable and doesn't need to come from the DMA buffer.
So those GFP bits should be masked off as well.
Do the flag bit clearing at memcg_alloc_page_obj_cgroups() to make sure
that it is consistently applied no matter where it is called.
Link: https://lkml.kernel.org/r/20210505200610.13943-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210505200610.13943-2-longman@redhat.com
Fixes: 286e04b8ed7a ("mm: memcg/slab: allocate obj_cgroups for non-root slab pages")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most kmem_cache_alloc() calls are from user context. With instrumentation
enabled, the measured amount of kmem_cache_alloc() calls from non-task
context was about 0.01% of the total.
The irq disable/enable sequence used in this case to access content from
object stock is slow. To optimize for user context access, there are now
two sets of object stocks (in the new obj_stock structure) for task
context and interrupt context access respectively.
The task context object stock can be accessed after disabling preemption
which is cheap in non-preempt kernel. The interrupt context object stock
can only be accessed after disabling interrupt. User context code can
access interrupt object stock, but not vice versa.
The downside of this change is that there are more data stored in local
object stocks and not reflected in the charge counter and the vmstat
arrays. However, this is a small price to pay for better performance.
[longman@redhat.com: fix potential uninitialized variable warning]
Link: https://lkml.kernel.org/r/20210526193602.8742-1-longman@redhat.com
[akpm@linux-foundation.org: coding style fixes]
Link: https://lkml.kernel.org/r/20210506150007.16288-5-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <guro@fb.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two issues with the current refill_obj_stock() code. First of
all, when nr_bytes reaches over PAGE_SIZE, it calls drain_obj_stock() to
atomically flush out remaining bytes to obj_cgroup, clear cached_objcg and
do a obj_cgroup_put(). It is likely that the same obj_cgroup will be used
again which leads to another call to drain_obj_stock() and
obj_cgroup_get() as well as atomically retrieve the available byte from
obj_cgroup. That is costly. Instead, we should just uncharge the excess
pages, reduce the stock bytes and be done with it. The drain_obj_stock()
function should only be called when obj_cgroup changes.
Secondly, when charging an object of size not less than a page in
obj_cgroup_charge(), it is possible that the remaining bytes to be
refilled to the stock will overflow a page and cause refill_obj_stock() to
uncharge 1 page. To avoid the additional uncharge in this case, a new
allow_uncharge flag is added to refill_obj_stock() which will be set to
false when called from obj_cgroup_charge() so that an uncharge_pages()
call won't be issued right after a charge_pages() call unless the objcg
changes.
A multithreaded kmalloc+kfree microbenchmark on a 2-socket 48-core
96-thread x86-64 system with 96 testing threads were run. Before this
patch, the total number of kilo kmalloc+kfree operations done for a 4k
large object by all the testing threads per second were 4,304 kops/s
(cgroup v1) and 8,478 kops/s (cgroup v2). After applying this patch, the
number were 4,731 (cgroup v1) and 418,142 (cgroup v2) respectively. This
represents a performance improvement of 1.10X (cgroup v1) and 49.3X
(cgroup v2).
Link: https://lkml.kernel.org/r/20210506150007.16288-4-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Before the new slab memory controller with per object byte charging,
charging and vmstat data update happen only when new slab pages are
allocated or freed. Now they are done with every kmem_cache_alloc() and
kmem_cache_free(). This causes additional overhead for workloads that
generate a lot of alloc and free calls.
The memcg_stock_pcp is used to cache byte charge for a specific obj_cgroup
to reduce that overhead. To further reducing it, this patch makes the
vmstat data cached in the memcg_stock_pcp structure as well until it
accumulates a page size worth of update or when other cached data change.
Caching the vmstat data in the per-cpu stock eliminates two writes to
non-hot cachelines for memcg specific as well as memcg-lruvecs specific
vmstat data by a write to a hot local stock cacheline.
On a 2-socket Cascade Lake server with instrumentation enabled and this
patch applied, it was found that about 20% (634400 out of 3243830) of the
time when mod_objcg_state() is called leads to an actual call to
__mod_objcg_state() after initial boot. When doing parallel kernel build,
the figure was about 17% (24329265 out of 142512465). So caching the
vmstat data reduces the number of calls to __mod_objcg_state() by more
than 80%.
Link: https://lkml.kernel.org/r/20210506150007.16288-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/memcg: Reduce kmemcache memory accounting overhead", v6.
With the recent introduction of the new slab memory controller, we
eliminate the need for having separate kmemcaches for each memory cgroup
and reduce overall kernel memory usage. However, we also add additional
memory accounting overhead to each call of kmem_cache_alloc() and
kmem_cache_free().
For workloads that require a lot of kmemcache allocations and
de-allocations, they may experience performance regression as illustrated
in [1] and [2].
A simple kernel module that performs repeated loop of 100,000,000
kmem_cache_alloc() and kmem_cache_free() of either a small 32-byte object
or a big 4k object at module init time with a batch size of 4 (4 kmalloc's
followed by 4 kfree's) is used for benchmarking. The benchmarking tool
was run on a kernel based on linux-next-20210419. The test was run on a
CascadeLake server with turbo-boosting disable to reduce run-to-run
variation.
The small object test exercises mainly the object stock charging and
vmstat update code paths. The large object test also exercises the
refill_obj_stock() and __memcg_kmem_charge()/__memcg_kmem_uncharge() code
paths.
With memory accounting disabled, the run time was 3.130s with both small
object big object tests.
With memory accounting enabled, both cgroup v1 and v2 showed similar
results in the small object test. The performance results of the large
object test, however, differed between cgroup v1 and v2.
The execution times with the application of various patches in the
patchset were:
Applied patches Run time Accounting overhead %age 1 %age 2
--------------- -------- ------------------- ------ ------
Small 32-byte object:
None 11.634s 8.504s 100.0% 271.7%
1-2 9.425s 6.295s 74.0% 201.1%
1-3 9.708s 6.578s 77.4% 210.2%
1-4 8.062s 4.932s 58.0% 157.6%
Large 4k object (v2):
None 22.107s 18.977s 100.0% 606.3%
1-2 20.960s 17.830s 94.0% 569.6%
1-3 14.238s 11.108s 58.5% 354.9%
1-4 11.329s 8.199s 43.2% 261.9%
Large 4k object (v1):
None 36.807s 33.677s 100.0% 1075.9%
1-2 36.648s 33.518s 99.5% 1070.9%
1-3 22.345s 19.215s 57.1% 613.9%
1-4 18.662s 15.532s 46.1% 496.2%
N.B. %age 1 = overhead/unpatched overhead
%age 2 = overhead/accounting disabled time
Patch 2 (vmstat data stock caching) helps in both the small object test
and the large v2 object test. It doesn't help much in v1 big object test.
Patch 3 (refill_obj_stock improvement) does help the small object test
but offer significant performance improvement for the large object test
(both v1 and v2).
Patch 4 (eliminating irq disable/enable) helps in all test cases.
To test for the extreme case, a multi-threaded kmalloc/kfree
microbenchmark was run on the 2-socket 48-core 96-thread system with
96 testing threads in the same memcg doing kmalloc+kfree of a 4k object
with accounting enabled for 10s. The total number of kmalloc+kfree done
in kilo operations per second (kops/s) were as follows:
Applied patches v1 kops/s v1 change v2 kops/s v2 change
--------------- --------- --------- --------- ---------
None 3,520 1.00X 6,242 1.00X
1-2 4,304 1.22X 8,478 1.36X
1-3 4,731 1.34X 418,142 66.99X
1-4 4,587 1.30X 438,838 70.30X
With memory accounting disabled, the kmalloc/kfree rate was 1,481,291
kop/s. This test shows how significant the memory accouting overhead
can be in some extreme situations.
For this multithreaded test, the improvement from patch 2 mainly
comes from the conditional atomic xchg of objcg->nr_charged_bytes in
mod_objcg_state(). By using an unconditional xchg, the operation rates
were similar to the unpatched kernel.
Patch 3 elminates the single highly contended cacheline of
objcg->nr_charged_bytes for cgroup v2 leading to a huge performance
improvement. Cgroup v1, however, still has another highly contended
cacheline in the shared page counter &memcg->kmem. So the improvement
is only modest.
Patch 4 helps in cgroup v2, but performs worse in cgroup v1 as
eliminating the irq_disable/irq_enable overhead seems to aggravate the
cacheline contention.
[1] https://lore.kernel.org/linux-mm/20210408193948.vfktg3azh2wrt56t@gabell/T/#u
[2] https://lore.kernel.org/lkml/20210114025151.GA22932@xsang-OptiPlex-9020/
This patch (of 4):
mod_objcg_state() is moved from mm/slab.h to mm/memcontrol.c so that
further optimization can be done to it in later patches without exposing
unnecessary details to other mm components.
Link: https://lkml.kernel.org/r/20210506150007.16288-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210506150007.16288-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To check whether all pages and shadow entries in swap cache has been
removed before swap cache is freed.
Link: https://lkml.kernel.org/r/20210608005121.511140-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With commit 09854ba94c6a ("mm: do_wp_page() simplification"), after COW,
the idle swap cache page (neither the page nor the corresponding swap
entry is mapped by any process) will be left in the LRU list, even if it's
in the active list or the head of the inactive list. So, the page
reclaimer may take quite some overhead to reclaim these actually unused
pages.
To help the page reclaiming, in this patch, after COW, the idle swap cache
page will be tried to be freed. To avoid to introduce much overhead to
the hot COW code path,
a) there's almost zero overhead for non-swap case via checking
PageSwapCache() firstly.
b) the page lock is acquired via trylock only.
To test the patch, we used pmbench memory accessing benchmark with
working-set larger than available memory on a 2-socket Intel server with a
NVMe SSD as swap device. Test results shows that the pmbench score
increases up to 23.8% with the decreased size of swap cache and swapin
throughput.
Link: https://lkml.kernel.org/r/20210601053143.1380078-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org> [use free_swap_cache()]
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Before commit c10d38cc8d3e ("mm, swap: bounds check swap_info array
accesses to avoid NULL derefs"), the typical code to reference the
swap_info[] is as follows,
type = swp_type(swp_entry);
if (type >= nr_swapfiles)
/* handle invalid swp_entry */;
p = swap_info[type];
/* access fields of *p. OOPS! p may be NULL! */
Because the ordering isn't guaranteed, it's possible that swap_info[type]
is read before "nr_swapfiles". And that may result in NULL pointer
dereference.
So after commit c10d38cc8d3e, the code becomes,
struct swap_info_struct *swap_type_to_swap_info(int type)
{
if (type >= READ_ONCE(nr_swapfiles))
return NULL;
smp_rmb();
return READ_ONCE(swap_info[type]);
}
/* users */
type = swp_type(swp_entry);
p = swap_type_to_swap_info(type);
if (!p)
/* handle invalid swp_entry */;
/* dereference p */
Where the value of swap_info[type] (that is, "p") is checked to be
non-zero before being dereferenced. So, the NULL deferencing becomes
impossible even if "nr_swapfiles" is read after swap_info[type].
Therefore, the "smp_rmb()" becomes unnecessary.
And, we don't even need to read "nr_swapfiles" here. Because the non-zero
checking for "p" is sufficient. We just need to make sure we will not
access out of the boundary of the array. With the change, nr_swapfiles
will only be accessed with swap_lock held, except in
swapcache_free_entries(). Where the absolute correctness of the value
isn't needed, as described in the comments.
We still need to guarantee swap_info[type] is read before being
dereferenced. That can be satisfied via the data dependency ordering
enforced by READ_ONCE(swap_info[type]). This needs to be paired with
proper write barriers. So smp_store_release() is used in
alloc_swap_info() to guarantee the fields of *swap_info[type] is
initialized before swap_info[type] itself being written. Note that the
fields of *swap_info[type] is initialized to be 0 via kvzalloc() firstly.
The assignment and deferencing of swap_info[type] is like
rcu_assign_pointer() and rcu_dereference().
Link: https://lkml.kernel.org/r/20210520073301.1676294-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
deactivate_swap_slots_cache() and reactivate_swap_slots_cache() are only
called below their implementations. So these forward declarations are
meaningless and should be removed.
Link: https://lkml.kernel.org/r/20210520134022.1370406-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 55c653b71e8c ("mm: stop accounting shadow entries"),
nr_shadows is not used anymore.
Link: https://lkml.kernel.org/r/20210520134022.1370406-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Cleanups for swap", v2.
This series contains just cleanups to remove some unused variables, delete
meaningless forward declarations and so on. More details can be found in
the respective changelogs.
This patch (of 4):
We should move get_swap_page_of_type() under CONFIG_HIBERNATION since the
only caller of this function is now suspend routine.
[linmiaohe@huawei.com: move scan_swap_map() under CONFIG_HIBERNATION]
Link: https://lkml.kernel.org/r/20210521070855.2015094-1-linmiaohe@huawei.com
[linmiaohe@huawei.com: fold scan_swap_map() into the only caller get_swap_page_of_type()]
Link: https://lkml.kernel.org/r/20210527120328.3935132-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210520134022.1370406-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210520134022.1370406-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I was investigating the swap code, I found the below possible race
window:
CPU 1 CPU 2
----- -----
shmem_swapin
swap_cluster_readahead
if (likely(si->flags & (SWP_BLKDEV | SWP_FS_OPS))) {
swapoff
..
si->swap_file = NULL;
..
struct inode *inode = si->swap_file->f_mapping->host;[oops!]
Close this race window by using get/put_swap_device() to guard against
concurrent swapoff.
Link: https://lkml.kernel.org/r/20210426123316.806267-5-linmiaohe@huawei.com
Fixes: 8fd2e0b505d1 ("mm: swap: check if swap backing device is congested or not")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The non_swap_entry() was used for working with VMA based swap readahead
via commit ec560175c0b6 ("mm, swap: VMA based swap readahead"). At that
time, the non_swap_entry() checking is necessary because the function is
called before checking that in do_swap_page(). Then it's moved to
swap_ra_info() since commit eaf649ebc3ac ("mm: swap: clean up swap
readahead"). After that, the non_swap_entry() checking is unnecessary,
because swap_ra_info() is called after non_swap_entry() has been checked
already. The resulting code is confusing as the non_swap_entry() check
looks racy now because while we released the pte lock, somebody else might
have faulted in this pte. So we should check whether it's swap pte first
to guard against such race or swap_type will be unexpected. But the race
isn't important because it will not cause problem. We would have enough
checking when we really operate the PTE entries later. So we remove the
non_swap_entry() check here to avoid confusion.
Link: https://lkml.kernel.org/r/20210426123316.806267-4-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I was investigating the swap code, I found the below possible race
window:
CPU 1 CPU 2
----- -----
do_swap_page
if (data_race(si->flags & SWP_SYNCHRONOUS_IO)
swap_readpage
if (data_race(sis->flags & SWP_FS_OPS)) {
swapoff
..
p->swap_file = NULL;
..
struct file *swap_file = sis->swap_file;
struct address_space *mapping = swap_file->f_mapping;[oops!]
Note that for the pages that are swapped in through swap cache, this isn't
an issue. Because the page is locked, and the swap entry will be marked
with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
unlocked.
Fix this race by using get/put_swap_device() to guard against concurrent
swapoff.
Link: https://lkml.kernel.org/r/20210426123316.806267-3-linmiaohe@huawei.com
Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "close various race windows for swap", v6.
When I was investigating the swap code, I found some possible race
windows. This series aims to fix all these races. But using current
get/put_swap_device() to guard against concurrent swapoff for
swap_readpage() looks terrible because swap_readpage() may take really
long time. And to reduce the performance overhead on the hot-path as much
as possible, it appears we can use the percpu_ref to close this race
window(as suggested by Huang, Ying). The patch 1 adds percpu_ref support
for swap and most of the remaining patches try to use this to close
various race windows. More details can be found in the respective
changelogs.
This patch (of 4):
Using current get/put_swap_device() to guard against concurrent swapoff
for some swap ops, e.g. swap_readpage(), looks terrible because they
might take really long time. This patch adds the percpu_ref support to
serialize against concurrent swapoff(as suggested by Huang, Ying). Also
we remove the SWP_VALID flag because it's used together with RCU solution.
Link: https://lkml.kernel.org/r/20210426123316.806267-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210426123316.806267-2-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pagewalk ignores hugepd entries and walk down the tables as if it was
traditionnal entries, leading to crazy result.
Add walk_hugepd_range() and use it to walk hugepage tables.
Link: https://lkml.kernel.org/r/38d04410700c8d02f28ba37e020b62c55d6f3d2c.1624597695.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Daniel Axtens <dja@axtens.net>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
has_pinned 32bit can be packed in the MMF_HAS_PINNED bit as a noop
cleanup.
Any atomic_inc/dec to the mm cacheline shared by all threads in pin-fast
would reintroduce a loss of SMP scalability to pin-fast, so there's no
future potential usefulness to keep an atomic in the mm for this.
set_bit(MMF_HAS_PINNED) will be theoretically a bit slower than WRITE_ONCE
(atomic_set is equivalent to WRITE_ONCE), but the set_bit (just like
atomic_set after this commit) has to be still issued only once per "mm",
so the difference between the two will be lost in the noise.
will-it-scale "mmap2" shows no change in performance with enterprise
config as expected.
will-it-scale "pin_fast" retains the > 4000% SMP scalability performance
improvement against upstream as expected.
This is a noop as far as overall performance and SMP scalability are
concerned.
[peterx@redhat.com: pack has_pinned in MMF_HAS_PINNED]
Link: https://lkml.kernel.org/r/YJqWESqyxa8OZA+2@t490s
[akpm@linux-foundation.org: coding style fixes]
[peterx@redhat.com: fix build for task_mmu.c, introduce mm_set_has_pinned_flag, fix comments]
Link: https://lkml.kernel.org/r/20210507150553.208763-4-peterx@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
has_pinned cannot be written by each pin-fast or it won't scale in SMP.
This isn't "false sharing" strictly speaking (it's more like "true
non-sharing"), but it creates the same SMP scalability bottleneck of
"false sharing".
To verify the improvement, below test is done on 40 cpus host with
Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz (must be with
CONFIG_GUP_TEST=y):
$ sudo chrt -f 1 ./gup_test -a -m 512 -j 40
Where we can get (average value for 40 threads):
Old kernel: 477729.97 (+- 3.79%)
New kernel: 89144.65 (+-11.76%)
On a similar condition with 256 cpus, this commits increases the SMP
scalability of pin_user_pages_fast() executed by different threads of the
same process by more than 4000%.
[peterx@redhat.com: rewrite commit message, add parentheses against "(A & B)"]
Link: https://lkml.kernel.org/r/20210507150553.208763-3-peterx@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use __set_page_dirty_no_writeback() instead. This will set the dirty bit
on the page, which will be used to avoid calling set_page_dirty() in the
future. It will have no effect on actually writing the page back, as the
pages are not on any LRU lists.
[akpm@linux-foundation.org: export __set_page_dirty_no_writeback() to modules]
Link: https://lkml.kernel.org/r/20210615162342.1669332-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is fundamentally the same code, so just call it instead of
duplicating it.
Link: https://lkml.kernel.org/r/20210615162342.1669332-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Further set_page_dirty cleanups".
Prompted by Christoph's recent patches, here are some more patches to
improve the state of set_page_dirty(). They're all from the folio tree,
so they've been tested to a certain extent.
This patch (of 6):
Nothing in __set_page_dirty() is specific to buffer_head, so move it to
mm/page-writeback.c. That removes the only caller of
account_page_dirtied() outside of page-writeback.c, so make it static.
Link: https://lkml.kernel.org/r/20210615162342.1669332-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20210615162342.1669332-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the CONFIG_BLOCK default to __set_page_dirty_buffers and just wire
that method up for the missing instances.
[hch@lst.de: ecryptfs: add a ->set_page_dirty cludge]
Link: https://lkml.kernel.org/r/20210624125250.536369-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210614061512.3966143-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Asynchronously try to release dying cgwbs by switching attached inodes to
the nearest living ancestor wb. It helps to get rid of per-cgroup
writeback structures themselves and of pinned memory and block cgroups,
which are significantly larger structures (mostly due to large per-cpu
statistics data). This prevents memory waste and helps to avoid different
scalability problems caused by large piles of dying cgroups.
Reuse the existing mechanism of inode switching used for foreign inode
detection. To speed things up batch up to 115 inode switching in a single
operation (the maximum number is selected so that the resulting struct
inode_switch_wbs_context can fit into 1024 bytes). Because every
switching consists of two steps divided by an RCU grace period, it would
be too slow without batching. Please note that the whole batch counts as
a single operation (when increasing/decreasing isw_nr_in_flight). This
allows to keep umounting working (flush the switching queue), however
prevents cleanups from consuming the whole switching quota and effectively
blocking the frn switching.
A cgwb cleanup operation can fail due to different reasons (e.g. not
enough memory, the cgwb has an in-flight/pending io, an attached inode in
a wrong state, etc). In this case the next scheduled cleanup will make a
new attempt. An attempt is made each time a new cgwb is offlined (in
other words a memcg and/or a blkcg is deleted by a user). In the future
an additional attempt scheduled by a timer can be implemented.
[guro@fb.com: replace open-coded "115" with arithmetic]
Link: https://lkml.kernel.org/r/YMEcSBcq/VXMiPPO@carbon.dhcp.thefacebook.com
[guro@fb.com: add smp_mb() to inode_prepare_wbs_switch()]
Link: https://lkml.kernel.org/r/YMFa+guFw7OFjf3X@carbon.dhcp.thefacebook.com
[willy@infradead.org: fix documentation]
Link: https://lkml.kernel.org/r/20210615200242.1716568-2-willy@infradead.org
Link: https://lkml.kernel.org/r/20210608230225.2078447-9-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently there is no way to iterate over inodes attached to a specific
cgwb structure. It limits the ability to efficiently reclaim the
writeback structure itself and associated memory and block cgroup
structures without scanning all inodes belonging to a sb, which can be
prohibitively expensive.
While dirty/in-active-writeback an inode belongs to one of the
bdi_writeback's io lists: b_dirty, b_io, b_more_io and b_dirty_time. Once
cleaned up, it's removed from all io lists. So the inode->i_io_list can
be reused to maintain the list of inodes, attached to a bdi_writeback
structure.
This patch introduces a new wb->b_attached list, which contains all inodes
which were dirty at least once and are attached to the given cgwb. Inodes
attached to the root bdi_writeback structures are never placed on such
list. The following patch will use this list to try to release cgwbs
structures more efficiently.
Link: https://lkml.kernel.org/r/20210608230225.2078447-6-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As account_page_dirtied() was always protected by xa_lock_irqsave(), so
using __this_cpu_inc() is better.
Link: https://lkml.kernel.org/r/20210512144742.4764-1-wuchi.zero@gmail.com
Signed-off-by: Chi Wu <wuchi.zero@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Howard Cochran <hcochran@kernelspring.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As the value of pos_ratio_polynom() clamp between 0 and 2LL <<
RATELIMIT_CALC_SHIFT, the global control line should be consistent with
it.
Link: https://lkml.kernel.org/r/20210511103606.3732-1-wuchi.zero@gmail.com
Signed-off-by: Chi Wu <wuchi.zero@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Howard Cochran <hcochran@kernelspring.com>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
