| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of patches for this merge window:
- Support for kasan
- 32-bit physical addresses on rv32i-based systems
- Support for CONFIG_DEBUG_VIRTUAL
- DT entry for the FU540 GPIO controller, which has recently had a
device driver merged
These boot a buildroot-based system on QEMU's virt board for me"
* tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT support for SiFive FU540 GPIO driver
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL
riscv: keep 32-bit kernel to 32-bit phys_addr_t
kasan: Add riscv to KASAN documentation.
riscv: Add KASAN support
kasan: No KASAN's memmove check if archs don't have it.
|
|
Pull KVM updates from Paolo Bonzini:
"This is the first batch of KVM changes.
ARM:
- cleanups and corner case fixes.
PPC:
- Bugfixes
x86:
- Support for mapping DAX areas with large nested page table entries.
- Cleanups and bugfixes here too. A particularly important one is a
fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
also a race condition which could be used in guest userspace to
exploit the guest kernel, for which the embargo expired today.
- Fast path for IPI delivery vmexits, shaving about 200 clock cycles
from IPI latency.
- Protect against "Spectre-v1/L1TF" (bring data in the cache via
speculative out of bound accesses, use L1TF on the sibling
hyperthread to read it), which unfortunately is an even bigger
whack-a-mole game than SpectreV1.
Sean continues his mission to rewrite KVM. In addition to a sizable
number of x86 patches, this time he contributed a pretty large
refactoring of vCPU creation that affects all architectures but should
not have any visible effect.
s390 will come next week together with some more x86 patches"
* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
x86/KVM: Clean up host's steal time structure
x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
x86/kvm: Cache gfn to pfn translation
x86/kvm: Introduce kvm_(un)map_gfn()
x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
KVM: PPC: Book3S HV: Release lock on page-out failure path
KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
KVM: arm64: pmu: Only handle supported event counters
KVM: arm64: pmu: Fix chained SW_INCR counters
KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
KVM: x86: Use a typedef for fastop functions
KVM: X86: Add 'else' to unify fastop and execute call path
KVM: x86: inline memslot_valid_for_gpte
KVM: x86/mmu: Use huge pages for DAX-backed files
KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
KVM: x86/mmu: Zap any compound page when collapsing sptes
KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
...
|
|
From Boris Ostrovsky:
The KVM hypervisor may provide a guest with ability to defer remote TLB
flush when the remote VCPU is not running. When this feature is used,
the TLB flush will happen only when the remote VPCU is scheduled to run
again. This will avoid unnecessary (and expensive) IPIs.
Under certain circumstances, when a guest initiates such deferred action,
the hypervisor may miss the request. It is also possible that the guest
may mistakenly assume that it has already marked remote VCPU as needing
a flush when in fact that request had already been processed by the
hypervisor. In both cases this will result in an invalid translation
being present in a vCPU, potentially allowing accesses to memory locations
in that guest's address space that should not be accessible.
Note that only intra-guest memory is vulnerable.
The five patches address both of these problems:
1. The first patch makes sure the hypervisor doesn't accidentally clear
a guest's remote flush request
2. The rest of the patches prevent the race between hypervisor
acknowledging a remote flush request and guest issuing a new one.
Conflicts:
arch/x86/kvm/x86.c [move from kvm_arch_vcpu_free to kvm_arch_vcpu_destroy]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull mmu_notifier updates from Jason Gunthorpe:
"This small series revises the names in mmu_notifier to make the code
clearer and more readable"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/mmu_notifiers: Use 'interval_sub' as the variable for mmu_interval_notifier
mm/mmu_notifiers: Use 'subscription' as the variable name for mmu_notifier
mm/mmu_notifier: Rename struct mmu_notifier_mm to mmu_notifier_subscriptions
|
|
Pull io_uring updates from Jens Axboe:
- Support for various new opcodes (fallocate, openat, close, statx,
fadvise, madvise, openat2, non-vectored read/write, send/recv, and
epoll_ctl)
- Faster ring quiesce for fileset updates
- Optimizations for overflow condition checking
- Support for max-sized clamping
- Support for probing what opcodes are supported
- Support for io-wq backend sharing between "sibling" rings
- Support for registering personalities
- Lots of little fixes and improvements
* tag 'for-5.6/io_uring-vfs-2020-01-29' of git://git.kernel.dk/linux-block: (64 commits)
io_uring: add support for epoll_ctl(2)
eventpoll: support non-blocking do_epoll_ctl() calls
eventpoll: abstract out epoll_ctl() handler
io_uring: fix linked command file table usage
io_uring: support using a registered personality for commands
io_uring: allow registering credentials
io_uring: add io-wq workqueue sharing
io-wq: allow grabbing existing io-wq
io_uring/io-wq: don't use static creds/mm assignments
io-wq: make the io_wq ref counted
io_uring: fix refcounting with batched allocations at OOM
io_uring: add comment for drain_next
io_uring: don't attempt to copy iovec for READ/WRITE
io_uring: honor IOSQE_ASYNC for linked reqs
io_uring: prep req when do IOSQE_ASYNC
io_uring: use labeled array init in io_op_defs
io_uring: optimise sqe-to-req flags translation
io_uring: remove REQ_F_IO_DRAINED
io_uring: file switch work needs to get flushed on exit
io_uring: hide uring_fd in ctx
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features, highlights:
- async discard
- "mount -o discard=async" to enable it
- freed extents are not discarded immediatelly, but grouped
together and trimmed later, with IO rate limiting
- the "sync" mode submits short extents that could have been
ignored completely by the device, for SATA prior to 3.1 the
requests are unqueued and have a big impact on performance
- the actual discard IO requests have been moved out of
transaction commit to a worker thread, improving commit latency
- IO rate and request size can be tuned by sysfs files, for now
enabled only with CONFIG_BTRFS_DEBUG as we might need to
add/delete the files and don't have a stable-ish ABI for
general use, defaults are conservative
- export device state info in sysfs, eg. missing, writeable
- no discard of extents known to be untouched on disk (eg. after
reservation)
- device stats reset is logged with process name and PID that called
the ioctl
Fixes:
- fix missing hole after hole punching and fsync when using NO_HOLES
- writeback: range cyclic mode could miss some dirty pages and lead
to OOM
- two more corner cases for metadata_uuid change after power loss
during the change
- fix infinite loop during fsync after mix of rename operations
Core changes:
- qgroup assign returns ENOTCONN when quotas not enabled, used to
return EINVAL that was confusing
- device closing does not need to allocate memory anymore
- snapshot aware code got removed, disabled for years due to
performance problems, reimplmentation will allow to select wheter
defrag breaks or does not break COW on shared extents
- tree-checker:
- check leaf chunk item size, cross check against number of
stripes
- verify location keys for DIR_ITEM, DIR_INDEX and XATTR items
- new self test for physical -> logical mapping code, used for super
block range exclusion
- assertion helpers/macros updated to avoid objtool "unreachable
code" reports on older compilers or config option combinations"
* tag 'for-5.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (84 commits)
btrfs: free block groups after free'ing fs trees
btrfs: Fix split-brain handling when changing FSID to metadata uuid
btrfs: Handle another split brain scenario with metadata uuid feature
btrfs: Factor out metadata_uuid code from find_fsid.
btrfs: Call find_fsid from find_fsid_inprogress
Btrfs: fix infinite loop during fsync after rename operations
btrfs: set trans->drity in btrfs_commit_transaction
btrfs: drop log root for dropped roots
btrfs: sysfs, add devid/dev_state kobject and device attributes
btrfs: Refactor btrfs_rmap_block to improve readability
btrfs: Add self-tests for btrfs_rmap_block
btrfs: selftests: Add support for dummy devices
btrfs: Move and unexport btrfs_rmap_block
btrfs: separate definition of assertion failure handlers
btrfs: device stats, log when stats are zeroed
btrfs: fix improper setting of scanned for range cyclic write cache pages
btrfs: safely advance counter when looking up bio csums
btrfs: remove unused member btrfs_device::work
btrfs: remove unnecessary wrapper get_alloc_profile
btrfs: add correction to handle -1 edge case in async discard
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Ingo Molnar:
"Misc changes:
- Enhance #GP fault printouts by distinguishing between canonical and
non-canonical address faults, and also add KASAN fault decoding.
- Fix/enhance the x86 NMI handler by putting the duration check into
a direct function call instead of an irq_work which we know to be
broken in some cases.
- Clean up do_general_protection() a bit"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Remove irq_work from the long duration NMI handler
x86/traps: Cleanup do_general_protection()
x86/kasan: Print original address on #GP
x86/dumpstack: Introduce die_addr() for die() with #GP fault address
x86/traps: Print address on #GP
x86/insn-eval: Add support for 64-bit kernel mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Cleanup of the GOP [graphics output] handling code in the EFI stub
- Complete refactoring of the mixed mode handling in the x86 EFI stub
- Overhaul of the x86 EFI boot/runtime code
- Increase robustness for mixed mode code
- Add the ability to disable DMA at the root port level in the EFI
stub
- Get rid of RWX mappings in the EFI memory map and page tables,
where possible
- Move the support code for the old EFI memory mapping style into its
only user, the SGI UV1+ support code.
- plus misc fixes, updates, smaller cleanups.
... and due to interactions with the RWX changes, another round of PAT
cleanups make a guest appearance via the EFI tree - with no side
effects intended"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
efi/x86: Disable instrumentation in the EFI runtime handling code
efi/libstub/x86: Fix EFI server boot failure
efi/x86: Disallow efi=old_map in mixed mode
x86/boot/compressed: Relax sed symbol type regex for LLVM ld.lld
efi/x86: avoid KASAN false positives when accessing the 1: 1 mapping
efi: Fix handling of multiple efi_fake_mem= entries
efi: Fix efi_memmap_alloc() leaks
efi: Add tracking for dynamically allocated memmaps
efi: Add a flags parameter to efi_memory_map
efi: Fix comment for efi_mem_type() wrt absent physical addresses
efi/arm: Defer probe of PCIe backed efifb on DT systems
efi/x86: Limit EFI old memory map to SGI UV machines
efi/x86: Avoid RWX mappings for all of DRAM
efi/x86: Don't map the entire kernel text RW for mixed mode
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
efi/libstub/x86: Fix unused-variable warning
efi/libstub/x86: Use mandatory 16-byte stack alignment in mixed mode
efi/libstub/x86: Use const attribute for efi_is_64bit()
efi: Allow disabling PCI busmastering on bridges during boot
efi/x86: Allow translating 64-bit arguments for mixed mode calls
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core SMP updates from Thomas Gleixner:
"A small set of SMP core code changes:
- Rework the smp function call core code to avoid the allocation of
an additional cpumask
- Remove the not longer required GFP argument from on_each_cpu_cond()
and on_each_cpu_cond_mask() and fixup the callers"
* tag 'smp-core-2020-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Remove allocation mask from on_each_cpu_cond.*()
smp: Add a smp_cond_func_t argument to smp_call_function_many()
smp: Use smp_cond_func_t as type for the conditional function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup2 interface for hugetlb controller. I think this was the last
remaining bit which was missing from cgroup2
- fixes for race and a spurious warning in threaded cgroup handling
- other minor changes
* 'for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
iocost: Fix iocost_monitor.py due to helper type mismatch
cgroup: Prevent double killing of css when enabling threaded cgroup
cgroup: fix function name in comment
mm: hugetlb controller for cgroups v2
|
|
Add a helper, is_transparent_hugepage(), to explicitly check whether a
compound page is a THP and use it when populating KVM's secondary MMU.
The explicit check fixes a bug where a remapped compound page, e.g. for
an XDP Rx socket, is mapped into a KVM guest and is mistaken for a THP,
which results in KVM incorrectly creating a huge page in its secondary
MMU.
Fixes: 936a5fe6e6148 ("thp: kvm mmu transparent hugepage support")
Reported-by: syzbot+c9d1fb51ac9d0d10c39d@syzkaller.appspotmail.com
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The allocation mask is no longer used by on_each_cpu_cond() and
on_each_cpu_cond_mask() and can be removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20200117090137.1205765-4-bigeasy@linutronix.de
|
|
If archs don't have memmove then the C implementation from lib/string.c is used,
and then it's instrumented by compiler. So there is no need to add KASAN's
memmove to manual checks.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This is in preparation for enabling this functionality through io_uring.
Add a helper that is just exporting what sys_madvise() does, and have the
system call use it.
No functional changes in this patch.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Bitmaps are fairly popular for their space efficiency, but we don't have
generic iterators available. Make percpu's bitmap region iterators
available to everyone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The 'interval_sub' is placed on the 'notifier_subscriptions' interval
tree.
This eliminates the poor name 'mni' for this variable.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The 'subscription' is placed on the 'notifier_subscriptions' list.
This eliminates the poor name 'mn' for this variable.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The name mmu_notifier_mm implies that the thing is a mm_struct pointer,
and is difficult to abbreviate. The struct is actually holding the
interval tree and hlist containing the notifiers subscribed to a mm.
Use 'subscriptions' as the variable name for this struct instead of the
really terrible and misleading 'mmn_mm'.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
If a task belongs to a time namespace then the VVAR page which contains
the system wide VDSO data is replaced with a namespace specific page
which has the same layout as the VVAR page.
Co-developed-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-25-dima@arista.com
|
|
When booting with amd_iommu=off, the following WARNING message
appears:
AMD-Vi: AMD IOMMU disabled on kernel command-line
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/workqueue.c:2772 flush_workqueue+0x42e/0x450
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc3-amd-iommu #6
Hardware name: Lenovo ThinkSystem SR655-2S/7D2WRCZ000, BIOS D8E101L-1.00 12/05/2019
RIP: 0010:flush_workqueue+0x42e/0x450
Code: ff 0f 0b e9 7a fd ff ff 4d 89 ef e9 33 fe ff ff 0f 0b e9 7f fd ff ff 0f 0b e9 bc fd ff ff 0f 0b e9 a8 fd ff ff e8 52 2c fe ff <0f> 0b 31 d2 48 c7 c6 e0 88 c5 95 48 c7 c7 d8 ad f0 95 e8 19 f5 04
Call Trace:
kmem_cache_destroy+0x69/0x260
iommu_go_to_state+0x40c/0x5ab
amd_iommu_prepare+0x16/0x2a
irq_remapping_prepare+0x36/0x5f
enable_IR_x2apic+0x21/0x172
default_setup_apic_routing+0x12/0x6f
apic_intr_mode_init+0x1a1/0x1f1
x86_late_time_init+0x17/0x1c
start_kernel+0x480/0x53f
secondary_startup_64+0xb6/0xc0
---[ end trace 30894107c3749449 ]---
x2apic: IRQ remapping doesn't support X2APIC mode
x2apic disabled
The warning is caused by the calling of 'kmem_cache_destroy()'
in free_iommu_resources(). Here is the call path:
free_iommu_resources
kmem_cache_destroy
flush_memcg_workqueue
flush_workqueue
The root cause is that the IOMMU subsystem runs before the workqueue
subsystem, which the variable 'wq_online' is still 'false'. This leads
to the statement 'if (WARN_ON(!wq_online))' in flush_workqueue() is
'true'.
Since the variable 'memcg_kmem_cache_wq' is not allocated during the
time, it is unnecessary to call flush_memcg_workqueue(). This prevents
the WARNING message triggered by flush_workqueue().
Link: http://lkml.kernel.org/r/20200103085503.1665-1-ahuang12@lenovo.com
Fixes: 92ee383f6daab ("mm: fix race between kmem_cache destroy, create and deactivate")
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Reported-by: Xiaochun Lee <lixc17@lenovo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use div64_ul() instead of do_div() if the divisor is unsigned long, to
avoid truncation to 32-bit on 64-bit platforms.
Link: http://lkml.kernel.org/r/20200102081442.8273-4-wenyang@linux.alibaba.com
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The two variables 'numerator' and 'denominator', though they are
declared as long, they should actually be unsigned long (according to
the implementation of the fprop_fraction_percpu() function)
And do_div() does a 64-by-32 division, while the divisor 'denominator'
is unsigned long, thus 64-bit on 64-bit platforms. Hence the proper
function to call is div64_ul().
Link: http://lkml.kernel.org/r/20200102081442.8273-3-wenyang@linux.alibaba.com
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "use div64_ul() instead of div_u64() if the divisor is
unsigned long".
We were first inspired by commit b0ab99e7736a ("sched: Fix possible divide
by zero in avg_atom () calculation"), then refer to the recently analyzed
mm code, we found this suspicious place.
201 if (min) {
202 min *= this_bw;
203 do_div(min, tot_bw);
204 }
And we also disassembled and confirmed it:
/usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 201
0xffffffff811c37da <__wb_calc_thresh+234>: xor %r10d,%r10d
0xffffffff811c37dd <__wb_calc_thresh+237>: test %rax,%rax
0xffffffff811c37e0 <__wb_calc_thresh+240>: je 0xffffffff811c3800 <__wb_calc_thresh+272>
/usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 202
0xffffffff811c37e2 <__wb_calc_thresh+242>: imul %r8,%rax
/usr/src/debug/kernel-4.9.168-016.ali3000/linux-4.9.168-016.ali3000.alios7.x86_64/mm/page-writeback.c: 203
0xffffffff811c37e6 <__wb_calc_thresh+246>: mov %r9d,%r10d ---> truncates it to 32 bits here
0xffffffff811c37e9 <__wb_calc_thresh+249>: xor %edx,%edx
0xffffffff811c37eb <__wb_calc_thresh+251>: div %r10
0xffffffff811c37ee <__wb_calc_thresh+254>: imul %rbx,%rax
0xffffffff811c37f2 <__wb_calc_thresh+258>: shr $0x2,%rax
0xffffffff811c37f6 <__wb_calc_thresh+262>: mul %rcx
0xffffffff811c37f9 <__wb_calc_thresh+265>: shr $0x2,%rdx
0xffffffff811c37fd <__wb_calc_thresh+269>: mov %rdx,%r10
This series uses div64_ul() instead of div_u64() if the divisor is
unsigned long, to avoid truncation to 32-bit on 64-bit platforms.
This patch (of 3):
The variables 'min' and 'max' are unsigned long and do_div truncates
them to 32 bits, which means it can test non-zero and be truncated to
zero for division. Fix this issue by using div64_ul() instead.
Link: http://lkml.kernel.org/r/20200102081442.8273-2-wenyang@linux.alibaba.com
Fixes: 693108a8a667 ("writeback: make bdi->min/max_ratio handling cgroup writeback aware")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable
debugging") has introduced a static key to reduce overhead when
debug_pagealloc is compiled in but not enabled. It relied on the
assumption that jump_label_init() is called before parse_early_param()
as in start_kernel(), so when the "debug_pagealloc=on" option is parsed,
it is safe to enable the static key.
However, it turns out multiple architectures call parse_early_param()
earlier from their setup_arch(). x86 also calls jump_label_init() even
earlier, so no issue was found while testing the commit, but same is not
true for e.g. ppc64 and s390 where the kernel would not boot with
debug_pagealloc=on as found by our QA.
To fix this without tricky changes to init code of multiple
architectures, this patch partially reverts the static key conversion
from 96a2b03f281d. Init-time and non-fastpath calls (such as in arch
code) of debug_pagealloc_enabled() will again test a simple bool
variable. Fastpath mm code is converted to a new
debug_pagealloc_enabled_static() variant that relies on the static key,
which is enabled in a well-defined point in mm_init() where it's
guaranteed that jump_label_init() has been called, regardless of
architecture.
[sfr@canb.auug.org.au: export _debug_pagealloc_enabled_early]
Link: http://lkml.kernel.org/r/20200106164944.063ac07b@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191219130612.23171-1-vbabka@suse.cz
Fixes: 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently slab percpu vmstats are flushed twice: during the memcg
offlining and just before freeing the memcg structure. Each time percpu
counters are summed, added to the atomic counterparts and propagated up
by the cgroup tree.
The second flushing is required due to how recursive vmstats are
implemented: counters are batched in percpu variables on a local level,
and once a percpu value is crossing some predefined threshold, it spills
over to atomic values on the local and each ascendant levels. It means
that without flushing some numbers cached in percpu variables will be
dropped on floor each time a cgroup is destroyed. And with uptime the
error on upper levels might become noticeable.
The first flushing aims to make counters on ancestor levels more
precise. Dying cgroups may resume in the dying state for a long time.
After kmem_cache reparenting which is performed during the offlining
slab counters of the dying cgroup don't have any chances to be updated,
because any slab operations will be performed on the parent level. It
means that the inaccuracy caused by percpu batching will not decrease up
to the final destruction of the cgroup. By the original idea flushing
slab counters during the offlining should minimize the visible
inaccuracy of slab counters on the parent level.
The problem is that percpu counters are not zeroed after the first
flushing. So every cached percpu value is summed twice. It creates a
small error (up to 32 pages per cpu, but usually less) which accumulates
on parent cgroup level. After creating and destroying of thousands of
child cgroups, slab counter on parent level can be way off the real
value.
For now, let's just stop flushing slab counters on memcg offlining. It
can't be done correctly without scheduling a work on each cpu: reading
and zeroing it during css offlining can race with an asynchronous
update, which doesn't expect values to be changed underneath.
With this change, slab counters on parent level will become eventually
consistent. Once all dying children are gone, values are correct. And
if not, the error is capped by 32 * NR_CPUS pages per dying cgroup.
It's not perfect, as slab are reparented, so any updates after the
reparenting will happen on the parent level. It means that if a slab
page was allocated, a counter on child level was bumped, then the page
was reparented and freed, the annihilation of positive and negative
counter values will not happen until the child cgroup is released. It
makes slab counters different from others, and it might want us to
implement flushing in a correct form again. But it's also a question of
performance: scheduling a work on each cpu isn't free, and it's an open
question if the benefit of having more accurate counters is worth it.
We might also consider flushing all counters on offlining, not only slab
counters.
So let's fix the main problem now: make the slab counters eventually
consistent, so at least the error won't grow with uptime (or more
precisely the number of created and destroyed cgroups). And think about
the accuracy of counters separately.
Link: http://lkml.kernel.org/r/20191220042728.1045881-1-guro@fb.com
Fixes: bee07b33db78 ("mm: memcontrol: flush percpu slab vmstats on kmem offlining")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
alignment
Shmem/tmpfs tries to provide THP-friendly mappings if huge pages are
enabled. But it doesn't work well with above-47bit hint address.
Normally, the kernel doesn't create userspace mappings above 47-bit,
even if the machine allows this (such as with 5-level paging on x86-64).
Not all user space is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information.
Userspace can ask for allocation from full address space by specifying
hint address (with or without MAP_FIXED) above 47-bits. If the
application doesn't need a particular address, but wants to allocate
from whole address space it can specify -1 as a hint address.
Unfortunately, this trick breaks THP alignment in shmem/tmp:
shmem_get_unmapped_area() would not try to allocate PMD-aligned area if
*any* hint address specified.
This can be fixed by requesting the aligned area if the we failed to
allocated at user-specified hint address. The request with inflated
length will also take the user-specified hint address. This way we will
not lose an allocation request from the full address space.
[kirill@shutemov.name: fold in a fixup]
Link: http://lkml.kernel.org/r/20191223231309.t6bh5hkbmokihpfu@box
Link: http://lkml.kernel.org/r/20191220142548.7118-3-kirill.shutemov@linux.intel.com
Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: "Willhalm, Thomas" <thomas.willhalm@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
alignment
Patch series "Fix two above-47bit hint address vs. THP bugs".
The two get_unmapped_area() implementations have to be fixed to provide
THP-friendly mappings if above-47bit hint address is specified.
This patch (of 2):
Filesystems use thp_get_unmapped_area() to provide THP-friendly
mappings. For DAX in particular.
Normally, the kernel doesn't create userspace mappings above 47-bit,
even if the machine allows this (such as with 5-level paging on x86-64).
Not all user space is ready to handle wide addresses. It's known that
at least some JIT compilers use higher bits in pointers to encode their
information.
Userspace can ask for allocation from full address space by specifying
hint address (with or without MAP_FIXED) above 47-bits. If the
application doesn't need a particular address, but wants to allocate
from whole address space it can specify -1 as a hint address.
Unfortunately, this trick breaks thp_get_unmapped_area(): the function
would not try to allocate PMD-aligned area if *any* hint address
specified.
Modify the routine to handle it correctly:
- Try to allocate the space at the specified hint address with length
padding required for PMD alignment.
- If failed, retry without length padding (but with the same hint
address);
- If the returned address matches the hint address return it.
- Otherwise, align the address as required for THP and return.
The user specified hint address is passed down to get_unmapped_area() so
above-47bit hint address will be taken into account without breaking
alignment requirements.
Link: http://lkml.kernel.org/r/20191220142548.7118-2-kirill.shutemov@linux.intel.com
Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Thomas Willhalm <thomas.willhalm@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Bruggeman, Otto G" <otto.g.bruggeman@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we remove an early section, we don't free the usage map, as the
usage maps of other sections are placed into the same page. Once the
section is removed, it is no longer an early section (especially, the
memmap is freed). When we re-add that section, the usage map is reused,
however, it is no longer an early section. When removing that section
again, we try to kfree() a usage map that was allocated during early
boot - bad.
Let's check against PageReserved() to see if we are dealing with an
usage map that was allocated during boot. We could also check against
!(PageSlab(usage_page) || PageCompound(usage_page)), but PageReserved() is
cleaner.
Can be triggered using memtrace under ppc64/powernv:
$ mount -t debugfs none /sys/kernel/debug/
$ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable
$ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable
------------[ cut here ]------------
kernel BUG at mm/slub.c:3969!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=3D64K MMU=3DHash SMP NR_CPUS=3D2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 154 Comm: sh Not tainted 5.5.0-rc2-next-20191216-00005-g0be1dba7b7c0 #61
NIP kfree+0x338/0x3b0
LR section_deactivate+0x138/0x200
Call Trace:
section_deactivate+0x138/0x200
__remove_pages+0x114/0x150
arch_remove_memory+0x3c/0x160
try_remove_memory+0x114/0x1a0
__remove_memory+0x20/0x40
memtrace_enable_set+0x254/0x850
simple_attr_write+0x138/0x160
full_proxy_write+0x8c/0x110
__vfs_write+0x38/0x70
vfs_write+0x11c/0x2a0
ksys_write+0x84/0x140
system_call+0x5c/0x68
---[ end trace 4b053cbd84e0db62 ]---
The first invocation will offline+remove memory blocks. The second
invocation will first add+online them again, in order to offline+remove
them again (usually we are lucky and the exact same memory blocks will
get "reallocated").
Tested on powernv with boot memory: The usage map will not get freed.
Tested on x86-64 with DIMMs: The usage map will get freed.
Using Dynamic Memory under a Power DLAPR can trigger it easily.
Triggering removal (I assume after previously removed+re-added) of
memory from the HMC GUI can crash the kernel with the same call trace
and is fixed by this patch.
Link: http://lkml.kernel.org/r/20191217104637.5509-1-david@redhat.com
Fixes: 326e1b8f83a4 ("mm/sparsemem: introduce a SECTION_IS_EARLY flag")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
THP page faults now attempt a __GFP_THISNODE allocation first, which
should only compact existing free memory, followed by another attempt
that can allocate from any node using reclaim/compaction effort
specified by global defrag setting and madvise.
This patch makes the following changes to the scheme:
- Before the patch, the first allocation relies on a check for
pageblock order and __GFP_IO to prevent excessive reclaim. This
however affects also the second attempt, which is not limited to
single node.
Instead of that, reuse the existing check for costly order
__GFP_NORETRY allocations, and make sure the first THP attempt uses
__GFP_NORETRY. As a side-effect, all costly order __GFP_NORETRY
allocations will bail out if compaction needs reclaim, while
previously they only bailed out when compaction was deferred due to
previous failures.
This should be still acceptable within the __GFP_NORETRY semantics.
- Before the patch, the second allocation attempt (on all nodes) was
passing __GFP_NORETRY. This is redundant as the check for pageblock
order (discussed above) was stronger. It's also contrary to
madvise(MADV_HUGEPAGE) which means some effort to allocate THP is
requested.
After this patch, the second attempt doesn't pass __GFP_THISNODE nor
__GFP_NORETRY.
To sum up, THP page faults now try the following attempts:
1. local node only THP allocation with no reclaim, just compaction.
2. for madvised VMA's or when synchronous compaction is enabled always - THP
allocation from any node with effort determined by global defrag setting
and VMA madvise
3. fallback to base pages on any node
Link: http://lkml.kernel.org/r/08a3f4dd-c3ce-0009-86c5-9ee51aba8557@suse.cz
Fixes: b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when compaction may not succeed")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The ARMv8 64-bit architecture supports execute-only user permissions by
clearing the PTE_USER and PTE_UXN bits, practically making it a mostly
privileged mapping but from which user running at EL0 can still execute.
The downside, however, is that the kernel at EL1 inadvertently reading
such mapping would not trip over the PAN (privileged access never)
protection.
Revert the relevant bits from commit cab15ce604e5 ("arm64: Introduce
execute-only page access permissions") so that PROT_EXEC implies
PROT_READ (and therefore PTE_USER) until the architecture gains proper
support for execute-only user mappings.
Fixes: cab15ce604e5 ("arm64: Introduce execute-only page access permissions")
Cc: <stable@vger.kernel.org> # 4.9.x-
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following lockdep splat was observed when a certain hugetlbfs test
was run:
================================
WARNING: inconsistent lock state
4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - -
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0
{SOFTIRQ-ON-W} state was registered at:
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
__nr_hugepages_store_common+0x11b/0xb30
hugetlb_sysctl_handler_common+0x209/0x2d0
proc_sys_call_handler+0x37f/0x450
vfs_write+0x157/0x460
ksys_write+0xb8/0x170
do_syscall_64+0xa5/0x4d0
entry_SYSCALL_64_after_hwframe+0x6a/0xdf
irq event stamp: 691296
hardirqs last enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60
hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81
softirqs last enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0
softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(hugetlb_lock);
<Interrupt>
lock(hugetlb_lock);
*** DEADLOCK ***
:
Call Trace:
<IRQ>
__lock_acquire+0x146b/0x48c0
lock_acquire+0x14f/0x3b0
_raw_spin_lock+0x30/0x70
free_huge_page+0x36f/0xaa0
bio_check_pages_dirty+0x2fc/0x5c0
clone_endio+0x17f/0x670 [dm_mod]
blk_update_request+0x276/0xe50
scsi_end_request+0x7b/0x6a0
scsi_io_completion+0x1c6/0x1570
blk_done_softirq+0x22e/0x350
__do_softirq+0x23d/0xad8
irq_exit+0x23e/0x2b0
do_IRQ+0x11a/0x200
common_interrupt+0xf/0xf
</IRQ>
Both the hugetbl_lock and the subpool lock can be acquired in
free_huge_page(). One way to solve the problem is to make both locks
irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is
held for a linear scan of ALL hugetlb pages during a cgroup reparentling
operation. So it is just too long to have irq disabled unless we can
break hugetbl_lock down into finer-grained locks with shorter lock hold
times.
Another alternative is to defer the freeing to a workqueue job. This
patch implements the deferred freeing by adding a free_hpage_workfn()
work function to do the actual freeing. The free_huge_page() call in a
non-task context saves the page to be freed in the hpage_freelist linked
list in a lockless manner using the llist APIs.
The generic workqueue is used to process the work, but a dedicated
workqueue can be used instead if it is desirable to have the huge page
freed ASAP.
Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of
llist APIs which simplfy the code.
Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the implementation of __gup_benchmark_ioctl() the allocated pages
should be released before returning in case of an invalid cmd. Release
pages via kvfree().
[akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1]
Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com
Fixes: 714a3a1ebafe ("mm/gup_benchmark.c: add additional pinning methods")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes.
As everything else is printed in kB, I chose to fix the value rather than
the string.
Before:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1878] 1000 1878 217253 151144 1269760 0 0 python
...
Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0
After:
[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name
...
[ 1436] 1000 1436 217253 151890 1294336 0 0 python
...
Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0
Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com
Fixes: 70cb6d267790 ("mm/oom: add oom_score_adj and pgtables to Killed process message")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Edward Chron <echron@arista.com>
Cc: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
target node
Felix Abecassis reports move_pages() would return random status if the
pages are already on the target node by the below test program:
int main(void)
{
const long node_id = 1;
const long page_size = sysconf(_SC_PAGESIZE);
const int64_t num_pages = 8;
unsigned long nodemask = 1 << node_id;
long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask));
if (ret < 0)
return (EXIT_FAILURE);
void **pages = malloc(sizeof(void*) * num_pages);
for (int i = 0; i < num_pages; ++i) {
pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ,
MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS,
-1, 0);
if (pages[i] == MAP_FAILED)
return (EXIT_FAILURE);
}
ret = set_mempolicy(MPOL_DEFAULT, NULL, 0);
if (ret < 0)
return (EXIT_FAILURE);
int *nodes = malloc(sizeof(int) * num_pages);
int *status = malloc(sizeof(int) * num_pages);
for (int i = 0; i < num_pages; ++i) {
nodes[i] = node_id;
status[i] = 0xd0; /* simulate garbage values */
}
ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE);
printf("move_pages: %ld\n", ret);
for (int i = 0; i < num_pages; ++i)
printf("status[%d] = %d\n", i, status[i]);
}
Then running the program would return nonsense status values:
$ ./move_pages_bug
move_pages: 0
status[0] = 208
status[1] = 208
status[2] = 208
status[3] = 208
status[4] = 208
status[5] = 208
status[6] = 208
status[7] = 208
This is because the status is not set if the page is already on the
target node, but move_pages() should return valid status as long as it
succeeds. The valid status may be errno or node id.
We can't simply initialize status array to zero since the pages may be
not on node 0. Fix it by updating status with node id which the page is
already on.
Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: a49bd4d71637 ("mm, numa: rework do_pages_move")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Felix Abecassis <fabecassis@nvidia.com>
Tested-by: Felix Abecassis <fabecassis@nvidia.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When zspage is migrated to the other zone, the zone page state should be
updated as well, otherwise the NR_ZSPAGE for each zone shows wrong
counts including proc/zoneinfo in practice.
Link: http://lkml.kernel.org/r/1575434841-48009-1-git-send-email-chanho.min@lge.com
Fixes: 91537fee0013 ("mm: add NR_ZSMALLOC to vmstat")
Signed-off-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Jinsuk Choi <jjinsuk.choi@lge.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We currently try to shrink a single zone when removing memory. We use
the zone of the first page of the memory we are removing. If that
memmap was never initialized (e.g., memory was never onlined), we will
read garbage and can trigger kernel BUGs (due to a stale pointer):
BUG: unable to handle page fault for address: 000000000000353d
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.3.0-rc5-next-20190820+ #317
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:clear_zone_contiguous+0x5/0x10
Code: 48 89 c6 48 89 c3 e8 2a fe ff ff 48 85 c0 75 cf 5b 5d c3 c6 85 fd 05 00 00 01 5b 5d c3 0f 1f 840
RSP: 0018:ffffad2400043c98 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000200000000 RCX: 0000000000000000
RDX: 0000000000200000 RSI: 0000000000140000 RDI: 0000000000002f40
RBP: 0000000140000000 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
R13: 0000000000140000 R14: 0000000000002f40 R15: ffff9e3e7aff3680
FS: 0000000000000000(0000) GS:ffff9e3e7bb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000353d CR3: 0000000058610000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__remove_pages+0x4b/0x640
arch_remove_memory+0x63/0x8d
try_remove_memory+0xdb/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x70/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x227/0x3a0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x221/0x550
worker_thread+0x50/0x3b0
kthread+0x105/0x140
ret_from_fork+0x3a/0x50
Modules linked in:
CR2: 000000000000353d
Instead, shrink the zones when offlining memory or when onlining failed.
Introduce and use remove_pfn_range_from_zone(() for that. We now
properly shrink the zones, even if we have DIMMs whereby
- Some memory blocks fall into no zone (never onlined)
- Some memory blocks fall into multiple zones (offlined+re-onlined)
- Multiple memory blocks that fall into different zones
Drop the zone parameter (with a potential dubious value) from
__remove_pages() and __remove_section().
Link: http://lkml.kernel.org/r/20191006085646.5768-6-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: <stable@vger.kernel.org> [5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make #GP exceptions caused by out-of-bounds KASAN shadow accesses easier
to understand by computing the address of the original access and
printing that. More details are in the comments in the patch.
This turns an error like this:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault, probably for non-canonical address
0xe017577ddf75b7dd: 0000 [#1] PREEMPT SMP KASAN PTI
into this:
general protection fault, probably for non-canonical address
0xe017577ddf75b7dd: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: maybe wild-memory-access in range
[0x00badbeefbadbee8-0x00badbeefbadbeef]
The hook is placed in architecture-independent code, but is currently
only wired up to the X86 exception handler because I'm not sufficiently
familiar with the address space layout and exception handling mechanisms
on other architectures.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191218231150.12139-4-jannh@google.com
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since commit 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on
memcg kmem"), shrinkers' idr is protected by CONFIG_MEMCG instead of
CONFIG_MEMCG_KMEM, so it makes no sense to protect shrinker idr replace
with CONFIG_MEMCG_KMEM.
And in the CONFIG_MEMCG && CONFIG_SLOB case, shrinker_idr contains only
shrinker, and it is deferred_split_shrinker. But it is never actually
called, since idr_replace() is never compiled due to the wrong #ifdef.
The deferred_split_shrinker all the time is staying in half-registered
state, and it's never called for subordinate mem cgroups.
Link: http://lkml.kernel.org/r/1575486978-45249-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: 0a432dcbeb32 ("mm: shrinker: make shrinker not depend on memcg kmem")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzkaller and the fault injector showed that I was wrong to assume that
we could ignore percpu shadow allocation failures.
Handle failures properly. Merge all the allocated areas back into the
free list and release the shadow, then clean up and return NULL. The
shadow is released unconditionally, which relies upon the fact that the
release function is able to tolerate pages not being present.
Also clean up shadows in the recovery path - currently they are not
released, which leaks a bit of memory.
Link: http://lkml.kernel.org/r/20191205140407.1874-3-dja@axtens.net
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reported-by: syzbot+82e323920b78d54aaed5@syzkaller.appspotmail.com
Reported-by: syzbot+59b7daa4315e07a994f1@syzkaller.appspotmail.com
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kasan_release_vmalloc uses apply_to_page_range to release vmalloc
shadow. Unfortunately, apply_to_page_range can allocate memory to fill
in page table entries, which is not what we want.
Also, kasan_release_vmalloc is called under free_vmap_area_lock, so if
apply_to_page_range does allocate memory, we get a sleep in atomic bug:
BUG: sleeping function called from invalid context at mm/page_alloc.c:4681
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 15087, name:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x199/0x216 lib/dump_stack.c:118
___might_sleep.cold.97+0x1f5/0x238 kernel/sched/core.c:6800
__might_sleep+0x95/0x190 kernel/sched/core.c:6753
prepare_alloc_pages mm/page_alloc.c:4681 [inline]
__alloc_pages_nodemask+0x3cd/0x890 mm/page_alloc.c:4730
alloc_pages_current+0x10c/0x210 mm/mempolicy.c:2211
alloc_pages include/linux/gfp.h:532 [inline]
__get_free_pages+0xc/0x40 mm/page_alloc.c:4786
__pte_alloc_one_kernel include/asm-generic/pgalloc.h:21 [inline]
pte_alloc_one_kernel include/asm-generic/pgalloc.h:33 [inline]
__pte_alloc_kernel+0x1d/0x200 mm/memory.c:459
apply_to_pte_range mm/memory.c:2031 [inline]
apply_to_pmd_range mm/memory.c:2068 [inline]
apply_to_pud_range mm/memory.c:2088 [inline]
apply_to_p4d_range mm/memory.c:2108 [inline]
apply_to_page_range+0x77d/0xa00 mm/memory.c:2133
kasan_release_vmalloc+0xa7/0xc0 mm/kasan/common.c:970
__purge_vmap_area_lazy+0xcbb/0x1f30 mm/vmalloc.c:1313
try_purge_vmap_area_lazy mm/vmalloc.c:1332 [inline]
free_vmap_area_noflush+0x2ca/0x390 mm/vmalloc.c:1368
free_unmap_vmap_area mm/vmalloc.c:1381 [inline]
remove_vm_area+0x1cc/0x230 mm/vmalloc.c:2209
vm_remove_mappings mm/vmalloc.c:2236 [inline]
__vunmap+0x223/0xa20 mm/vmalloc.c:2299
__vfree+0x3f/0xd0 mm/vmalloc.c:2356
__vmalloc_area_node mm/vmalloc.c:2507 [inline]
__vmalloc_node_range+0x5d5/0x810 mm/vmalloc.c:2547
__vmalloc_node mm/vmalloc.c:2607 [inline]
__vmalloc_node_flags mm/vmalloc.c:2621 [inline]
vzalloc+0x6f/0x80 mm/vmalloc.c:2666
alloc_one_pg_vec_page net/packet/af_packet.c:4233 [inline]
alloc_pg_vec net/packet/af_packet.c:4258 [inline]
packet_set_ring+0xbc0/0x1b50 net/packet/af_packet.c:4342
packet_setsockopt+0xed7/0x2d90 net/packet/af_packet.c:3695
__sys_setsockopt+0x29b/0x4d0 net/socket.c:2117
__do_sys_setsockopt net/socket.c:2133 [inline]
__se_sys_setsockopt net/socket.c:2130 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:2130
do_syscall_64+0xfa/0x780 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Switch to using the apply_to_existing_page_range() helper instead, which
won't allocate memory.
[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
Link: http://lkml.kernel.org/r/20191205140407.1874-2-dja@axtens.net
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
apply_to_page_range() takes an address range, and if any parts of it are
not covered by the existing page table hierarchy, it allocates memory to
fill them in.
In some use cases, this is not what we want - we want to be able to
operate exclusively on PTEs that are already in the tables.
Add apply_to_existing_page_range() for this. Adjust the walker
functions for apply_to_page_range to take 'create', which switches them
between the old and new modes.
This will be used in KASAN vmalloc.
[akpm@linux-foundation.org: reduce code duplication]
[akpm@linux-foundation.org: s/apply_to_existing_pages/apply_to_existing_page_range/]
[akpm@linux-foundation.org: initialize __apply_to_page_range::err]
Link: http://lkml.kernel.org/r/20191205140407.1874-1-dja@axtens.net
Signed-off-by: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Qian Cai <cai@lca.pw>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With CONFIG_KASAN_VMALLOC=y any use of memory obtained via vm_map_ram()
will crash because there is no shadow backing that memory.
Instead of sprinkling additional kasan_populate_vmalloc() calls all over
the vmalloc code, move it into alloc_vmap_area(). This will fix
vm_map_ram() and simplify the code a bit.
[aryabinin@virtuozzo.com: v2]
Link: http://lkml.kernel.org/r/20191205095942.1761-1-aryabinin@virtuozzo.comLink: http://lkml.kernel.org/r/20191204204534.32202-1-aryabinin@virtuozzo.com
Fixes: 3c5c3cfb9ef4 ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Alexander Potapenko <glider@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In the effort of supporting cgroups v2 into Kubernetes, I stumped on
the lack of the hugetlb controller.
When the controller is enabled, it exposes four new files for each
hugetlb size on non-root cgroups:
- hugetlb.<hugepagesize>.current
- hugetlb.<hugepagesize>.max
- hugetlb.<hugepagesize>.events
- hugetlb.<hugepagesize>.events.local
The differences with the legacy hierarchy are in the file names and
using the value "max" instead of "-1" to disable a limit.
The file .limit_in_bytes is renamed to .max.
The file .usage_in_bytes is renamed to .current.
.failcnt is not provided as a single file anymore, but its value can
be read through the new flat-keyed files .events and .events.local,
through the "max" key.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
type definitions
- Untangle the somewhat incestous way of how VMALLOC_START is used all across the
kernel, but is, on x86, defined deep inside one of the lowest level page table headers.
It doesn't help that vmalloc.h only includes a single asm header:
#include <asm/page.h> /* pgprot_t */
So there was no existing cross-arch way to decouple address layout
definitions from page.h details. I used this:
#ifndef VMALLOC_START
# include <asm/vmalloc.h>
#endif
This way every architecture that wants to simplify page.h can do so.
- Also on x86 we had a couple of LDT related inline functions that used
the late-stage address space layout positions - but these could be
uninlined without real trouble - the end result is cleaner this way as
well.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Switch the pte_unmap_same() and SLUB code over to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chistoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/r/20191015191821.11479-26-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
