| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This change makes populate_section_memmap()/depopulate_section_memmap
much simpler.
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200316125450.GG3486@MiWiFi-R3L-srv
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After introducing mem sub section concept, pfn_present() loses its literal
meaning, and will not be necessary a truth on partial populated mem
section.
Since all of the callers use it to judge an absent section, it is better
to rename pfn_present() as pfn_in_present_section().
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Leonardo Bras <leonardo@linux.ibm.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Link: http://lkml.kernel.org/r/1581919110-29575-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memmap should be the address to page struct instead of address to pfn.
As mentioned by David, if system memory and devmem sit within a section,
the mismatch address would lead kdump to dump unexpected memory.
Since sub-section only works for SPARSEMEM_VMEMMAP, pfn_to_page() is valid
to get the page struct address at this point.
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Link: http://lkml.kernel.org/r/20200210005048.10437-1-richardw.yang@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When remapping an anonymous, private mapping, if MREMAP_DONTUNMAP is set,
the source mapping will not be removed. The remap operation will be
performed as it would have been normally by moving over the page tables to
the new mapping. The old vma will have any locked flags cleared, have no
pagetables, and any userfaultfds that were watching that range will
continue watching it.
For a mapping that is shared or not anonymous, MREMAP_DONTUNMAP will cause
the mremap() call to fail. Because MREMAP_DONTUNMAP always results in
moving a VMA you MUST use the MREMAP_MAYMOVE flag, it's not possible to
resize a VMA while also moving with MREMAP_DONTUNMAP so old_len must
always be equal to the new_len otherwise it will return -EINVAL.
We hope to use this in Chrome OS where with userfaultfd we could write an
anonymous mapping to disk without having to STOP the process or worry
about VMA permission changes.
This feature also has a use case in Android, Lokesh Gidra has said that
"As part of using userfaultfd for GC, We'll have to move the physical
pages of the java heap to a separate location. For this purpose mremap
will be used. Without the MREMAP_DONTUNMAP flag, when I mremap the java
heap, its virtual mapping will be removed as well. Therefore, we'll
require performing mmap immediately after. This is not only time
consuming but also opens a time window where a native thread may call mmap
and reserve the java heap's address range for its own usage. This flag
solves the problem."
[bgeffon@google.com: v6]
Link: http://lkml.kernel.org/r/20200218173221.237674-1-bgeffon@google.com
[bgeffon@google.com: v7]
Link: http://lkml.kernel.org/r/20200221174248.244748-1-bgeffon@google.com
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Lokesh Gidra <lokeshgidra@google.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: "Michael S . Tsirkin" <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Deacon <will@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Jesse Barnes <jsbarnes@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Florian Weimer <fweimer@redhat.com>
Link: http://lkml.kernel.org/r/20200207201856.46070-1-bgeffon@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Even on 64 bit kernel, the mmap failure can happen for a 32 bit task.
Virtual memory space shortage of a task on mmap is reported to userspace
as -ENOMEM. It can be confused as physical memory shortage of overall
system.
The vm_unmapped_area can be called to by some drivers or other kernel core
system like filesystem. In my platform, GPU driver calls to
vm_unmapped_area and the driver returns -ENOMEM even in GPU side shortage.
It can be hard to distinguish which code layer returns the -ENOMEM.
Create mmap trace file and add trace point of vm_unmapped_area.
i.e.)
277.156599: vm_unmapped_area: addr=77e0d03000 err=0 total_vm=0x17014b flags=0x1 len=0x400000 lo=0x8000 hi=0x7878c27000 mask=0x0 ofs=0x1
342.838740: vm_unmapped_area: addr=0 err=-12 total_vm=0xffb08 flags=0x0 len=0x100000 lo=0x40000000 hi=0xfffff000 mask=0x0 ofs=0x22
[akpm@linux-foundation.org: prefix address printk with 0x, per Matthew]
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200320055823.27089-3-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: mmap: add mmap trace point", v3.
Create mmap trace file and add trace point of vm_unmapped_area().
This patch (of 2):
In preparation for next patch remove inline of vm_unmapped_area and move
code to mmap.c. There is no logical change.
Also remove unmapped_area[_topdown] out of mm.h, there is no code
calling to them.
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20200320055823.27089-2-jaewon31.kim@samsung.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The param "start" actually referes to the physical memory start, which is
to be mapped into virtual area vma. And it is the field vma->vm_start
which stands for the start of the area.
Most of the time, we do not read through whole implementation of a
function but only the definition and essential comments. Accurate
comments are definitely the base stone.
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200318052206.105104-1-wenhu.wang@vivo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It really made me scratch my head. Replace the comment with an accurate
and consistent description.
The parameter pfn actually refers to the page frame number which is
right-shifted by PAGE_SHIFT from the physical address.
Signed-off-by: WANG Wenhu <wenhu.wang@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200310073955.43415-1-wenhu.wang@vivo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The existing gup code does not react to the fatal signals in many code
paths. For example, in one retry path of gup we're still using
down_read() rather than down_read_killable(). Also, when doing page
faults we don't pass in FAULT_FLAG_KILLABLE as well, which means that
within the faulting process we'll wait in non-killable way as well. These
were spotted by Linus during the code review of some other patches.
Let's allow the gup code to react to fatal signals to improve the
responsiveness of threads when during gup and being killed.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160256.9887-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the gup counterpart of the change that allows the VM_FAULT_RETRY
to happen for more than once. One thing to mention is that we must check
the fatal signal here before retry because the GUP can be interrupted by
that, otherwise we can loop forever.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220195357.16371-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/
[2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When follow_hugetlb_page() returns with *locked==0, it means we've got a
VM_FAULT_RETRY within the fauling process and we've released the mmap_sem.
When that happens, we should stop and bail out.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220155353.8676-3-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: Page fault enhancements", v6.
This series contains cleanups and enhancements to current page fault
logic. The whole idea comes from the discussion between Andrea and Linus
on the bug reported by syzbot here:
https://lkml.org/lkml/2017/11/2/833
Basically it does two things:
(a) Allows the page fault logic to be more interactive on not only
SIGKILL, but also the rest of userspace signals, and,
(b) Allows the page fault retry (VM_FAULT_RETRY) to happen for more
than once.
For (a): with the changes we should be able to react faster when page
faults are working in parallel with userspace signals like SIGSTOP and
SIGCONT (and more), and with that we can remove the buggy part in
userfaultfd and benefit the whole page fault mechanism on faster signal
processing to reach the userspace.
For (b), we should be able to allow the page fault handler to loop for
even more than twice. Some context: for now since we have
FAULT_FLAG_ALLOW_RETRY we can allow to retry the page fault once with the
same interrupt context, however never more than twice. This can be not
only a potential cleanup to remove this assumption since AFAIU the code
itself doesn't really have this twice-only limitation (though that should
be a protective approach in the past), at the same time it'll greatly
simplify future works like userfaultfd write-protect where it's possible
to retry for more than twice (please have a look at [1] below for a
possible user that might require the page fault to be handled for a third
time; if we can remove the retry limitation we can simply drop that patch
and those complexity).
This patch (of 16):
There's plenty of places around __get_user_pages() that has a parameter
"nonblocking" which does not really mean that "it won't block" (because it
can really block) but instead it shows whether the mmap_sem is released by
up_read() during the page fault handling mostly when VM_FAULT_RETRY is
returned.
We have the correct naming in e.g. get_user_pages_locked() or
get_user_pages_remote() as "locked", however there're still many places
that are using the "nonblocking" as name.
Renaming the places to "locked" where proper to better suite the
functionality of the variable. While at it, fixing up some of the
comments accordingly.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Brian Geffon <bgeffon@google.com>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Link: http://lkml.kernel.org/r/20200220155353.8676-2-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the declaration and definition for is_vma_temporary_stack() are
scattered. Lets make is_vma_temporary_stack() helper available for
general use and also drop the declaration from (include/linux/huge_mm.h)
which is no longer required. While at this, rename this as
vma_is_temporary_stack() in line with existing helpers. This should not
cause any functional change.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1582782965-3274-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/vma: some more minor changes", v2.
The motivation here is to consolidate VMA flags and helpers in generic
memory header and reduce code duplication when ever applicable. If there
are other possible similar instances which might be missing here, please
do let me me know. I will be happy to incorporate them.
This patch (of 3):
Move VM_NO_KHUGEPAGED into generic header (include/linux/mm.h). This just
makes sure that no VMA flag is scattered in individual function files any
longer. While at this, fix an old comment which is no longer valid. This
should not cause any functional change.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1582782965-3274-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Following the update of pagewalk code commit a07984d48146 ("mm: pagewalk:
add p4d_entry() and pgd_entry()") we can modify the mapping_dirty_helpers'
huge page-table entry callbacks to avoid splitting when a huge pud or -pmd
is encountered.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200203154305.15045-1-thomas_os@shipmail.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a task is getting moved out of the OOMing cgroup, it might result in
unexpected OOM killings if memory.oom.group is used anywhere in the cgroup
tree.
Imagine the following example:
A (oom.group = 1)
/ \
(OOM) B C
Let's say B's memory.max is exceeded and it's OOMing. The OOM killer
selects a task in B as a victim, but someone asynchronously moves the task
into C. mem_cgroup_get_oom_group() will iterate over all ancestors of C
up to the root cgroup. In theory it had to stop at the oom_domain level -
the memory cgroup which is OOMing. But because B is not an ancestor of C,
it's not happening. Instead it chooses A (because it's oom.group is set),
and kills all tasks in A. This behavior is wrong because the OOM happened
in B, so there is no reason to kill anything outside.
Fix this by checking it the memory cgroup to which the task belongs is a
descendant of the oom_domain. If not, memory.oom.group should be ignored,
and the OOM killer should kill only the victim task.
Reported-by: Dan Schatzberg <dschatzberg@fb.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/20200316223510.3176148-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The read side of this is all protected, but we can still tear if multiple
iterations of mem_cgroup_protected are going at the same time.
There's some intentional racing in mem_cgroup_protected which is ok, but
load/store tearing should be avoided.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/d1e9fbc0379fe8db475d82c8b6fbe048876e12ae.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The write side of this is xchg()/smp_mb(), so that's all good. Just a few
sites missing a READ_ONCE.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/bbec2c3d822217334855c8877a9d28b2a6d395fb.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This can be set concurrently with reads, which may cause the wrong value
to be propagated.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/e809b4e6b0c1626dac6945970de06409a180ee65.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This can be set concurrently with reads, which may cause the wrong value
to be propagated.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/448206f44b0fa7be9dad2ca2601d2bcb2c0b7844.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This one is a bit more nuanced because we have memcg_max_mutex, which is
mostly just used for enforcing invariants, but we still need to READ_ONCE
since (despite its name) it doesn't really protect memory.max access.
On write (page_counter_set_max() and memory_max_write()) we use xchg(),
which uses smp_mb(), so that's already fine.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/50a31e5f39f8ae6c8fb73966ba1455f0924e8f44.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A mem_cgroup's high attribute can be concurrently set at the same time as
we are trying to read it -- for example, if we are in memory_high_write at
the same time as we are trying to do high reclaim.
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/2f66f7038ed1d4688e59de72b627ae0ea52efa83.1584034301.git.chris@chrisdown.name
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mem_cgroup_id_get_many() is currently used only when MMU or MEMCG_SWAP
configuration options are enabled. Having them disabled triggers the
following warning at compile time:
linux/mm/memcontrol.c:4797:13: warning: `mem_cgroup_id_get_many' defined but not used [-Wunused-function]
static void mem_cgroup_id_get_many(struct mem_cgroup *memcg, unsigned int n)
Make mem_cgroup_id_get_many() __maybe_unused to address the issue.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200305164354.48147-1-vincenzo.frascino@arm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently multiple locations in memcg code, css_tryget_online() is being
used. However it doesn't matter whether the cgroup is online for the
callers. Online used to matter when we had reparenting on offlining and
we needed a way to prevent new ones from showing up.
The failure case for couple of these css_tryget_online usage is to
fallback to root_mem_cgroup which kind of make bypassing the memcg
limits possible for some workloads. For example creating an inotify
group in a subcontainer and then deleting that container after moving the
process to a different container will make all the event objects
allocated for that group to the root_mem_cgroup. So, using
css_tryget_online() is dangerous for such cases.
Two locations still use the online version. The swapin of offlined
memcg's pages and the memcg kmem cache creation. The kmem cache indeed
needs the online version as the kernel does the reparenting of memcg
kmem caches. For the swapin case, it has been left for later as the
fallback is not really that concerning.
With swap accounting enabled, if the memcg of the swapped out page is
not online then the memcg extracted from the given 'mm' will be charged
and if 'mm' is NULL then root memcg will be charged. However I could
not find a code path where the given 'mm' will be NULL for swap-in
case.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/20200302203109.179417-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Right now, the effective protection of any given cgroup is capped by its
own explicit memory.low setting, regardless of what the parent says. The
reasons for this are mostly historical and ease of implementation: to make
delegation of memory.low safe, effective protection is the min() of all
memory.low up the tree.
Unfortunately, this limitation makes it impossible to protect an entire
subtree from another without forcing the user to make explicit protection
allocations all the way to the leaf cgroups - something that is highly
undesirable in real life scenarios.
Consider memory in a data center host. At the cgroup top level, we have a
distinction between system management software and the actual workload the
system is executing. Both branches are further subdivided into individual
services, job components etc.
We want to protect the workload as a whole from the system management
software, but that doesn't mean we want to protect and prioritize
individual workload wrt each other. Their memory demand can vary over
time, and we'd want the VM to simply cache the hottest data within the
workload subtree. Yet, the current memory.low limitations force us to
allocate a fixed amount of protection to each workload component in order
to get protection from system management software in general. This
results in very inefficient resource distribution.
Another concern with mandating downward allocation is that, as the
complexity of the cgroup tree grows, it gets harder for the lower levels
to be informed about decisions made at the host-level. Consider a
container inside a namespace that in turn creates its own nested tree of
cgroups to run multiple workloads. It'd be extremely difficult to
configure memory.low parameters in those leaf cgroups that on one hand
balance pressure among siblings as the container desires, while also
reflecting the host-level protection from e.g. rpm upgrades, that lie
beyond one or more delegation and namespacing points in the tree.
It's highly unusual from a cgroup interface POV that nested levels have to
be aware of and reflect decisions made at higher levels for them to be
effective.
To enable such use cases and scale configurability for complex trees, this
patch implements a resource inheritance model for memory that is similar
to how the CPU and the IO controller implement work-conserving resource
allocations: a share of a resource allocated to a subree always applies to
the entire subtree recursively, while allowing, but not mandating,
children to further specify distribution rules.
That means that if protection is explicitly allocated among siblings,
those configured shares are being followed during page reclaim just like
they are now. However, if the memory.low set at a higher level is not
fully claimed by the children in that subtree, the "floating" remainder is
applied to each cgroup in the tree in proportion to its size. Since
reclaim pressure is applied in proportion to size as well, each child in
that tree gets the same boost, and the effect is neutral among siblings -
with respect to each other, they behave as if no memory control was
enabled at all, and the VM simply balances the memory demands optimally
within the subtree. But collectively those cgroups enjoy a boost over the
cgroups in neighboring trees.
E.g. a leaf cgroup with a memory.low setting of 0 no longer means that
it's not getting a share of the hierarchically assigned resource, just
that it doesn't claim a fixed amount of it to protect from its siblings.
This allows us to recursively protect one subtree (workload) from another
(system management), while letting subgroups compete freely among each
other - without having to assign fixed shares to each leaf, and without
nested groups having to echo higher-level settings.
The floating protection composes naturally with fixed protection.
Consider the following example tree:
A A: low = 2G
/ \ A1: low = 1G
A1 A2 A2: low = 0G
As outside pressure is applied to this tree, A1 will enjoy a fixed
protection from A2 of 1G, but the remaining, unclaimed 1G from A is split
evenly among A1 and A2, coming out to 1.5G and 0.5G.
There is a slight risk of regressing theoretical setups where the
top-level cgroups don't know about the true budgeting and set bogusly high
"bypass" values that are meaningfully allocated down the tree. Such
setups would rely on unclaimed protection to be discarded, and
distributing it would change the intended behavior. Be safe and hide the
new behavior behind a mount option, 'memory_recursiveprot'.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20200227195606.46212-4-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The effective protection of any given cgroup is a somewhat complicated
construct that depends on the ancestor's configuration, siblings'
configurations, as well as current memory utilization in all these groups.
It's done this way to satisfy hierarchical delegation requirements while
also making the configuration semantics flexible and expressive in complex
real life scenarios.
Unfortunately, all the rules and requirements are sparsely documented, and
the code is a little too clever in merging different scenarios into a
single min() expression. This makes it hard to reason about the
implementation and avoid breaking semantics when making changes to it.
This patch documents each semantic rule individually and splits out the
handling of the overcommit case from the regular case.
Michal Koutný also points out that the points of equilibrium as described
in the existing example scenarios aren't actually accurate. Delete these
examples for now to avoid confusion.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20200227195606.46212-3-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: memcontrol: recursive memory.low protection", v3.
The current memory.low (and memory.min) semantics require protection to be
assigned to a cgroup in an untinterrupted chain from the top-level cgroup
all the way to the leaf.
In practice, we want to protect entire cgroup subtrees from each other
(system management software vs. workload), but we would like the VM to
balance memory optimally *within* each subtree, without having to make
explicit weight allocations among individual components. The current
semantics make that impossible.
They also introduce unmanageable complexity into more advanced resource
trees. For example:
host root
`- system.slice
`- rpm upgrades
`- logging
`- workload.slice
`- a container
`- system.slice
`- workload.slice
`- job A
`- component 1
`- component 2
`- job B
At a host-level perspective, we would like to protect the outer
workload.slice subtree as a whole from rpm upgrades, logging etc. But for
that to be effective, right now we'd have to propagate it down through the
container, the inner workload.slice, into the job cgroup and ultimately
the component cgroups where memory is actually, physically allocated.
This may cross several tree delegation points and namespace boundaries,
which make such a setup near impossible.
CPU and IO on the other hand are already distributed recursively. The
user would simply configure allowances at the host level, and they would
apply to the entire subtree without any downward propagation.
To enable the above-mentioned usecases and bring memory in line with other
resource controllers, this patch series extends memory.low/min such that
settings apply recursively to the entire subtree. Users can still assign
explicit shares in subgroups, but if they don't, any ancestral protection
will be distributed such that children compete freely amongst each other -
as if no memory control were enabled inside the subtree - but enjoy
protection from neighboring trees.
In the above example, the user would then be able to configure shares of
CPU, IO and memory at the host level to comprehensively protect and
isolate the workload.slice as a whole from system.slice activity.
Patch #1 fixes an existing bug that can give a cgroup tree more protection
than it should receive as per ancestor configuration.
Patch #2 simplifies and documents the existing code to make it easier to
reason about the changes in the next patch.
Patch #3 finally implements recursive memory protection semantics.
Because of a risk of regressing legacy setups, the new semantics are
hidden behind a cgroup2 mount option, 'memory_recursiveprot'.
More details in patch #3.
This patch (of 3):
When memory.low is overcommitted - i.e. the children claim more
protection than their shared ancestor grants them - the allowance is
distributed in proportion to how much each sibling uses their own declared
protection:
low_usage = min(memory.low, memory.current)
elow = parent_elow * (low_usage / siblings_low_usage)
However, siblings_low_usage is not the sum of all low_usages. It sums
up the usages of *only those cgroups that are within their memory.low*
That means that low_usage can be *bigger* than siblings_low_usage, and
consequently the total protection afforded to the children can be
bigger than what the ancestor grants the subtree.
Consider three groups where two are in excess of their protection:
A/memory.low = 10G
A/A1/memory.low = 10G, memory.current = 20G
A/A2/memory.low = 10G, memory.current = 20G
A/A3/memory.low = 10G, memory.current = 8G
siblings_low_usage = 8G (only A3 contributes)
A1/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(8G) = 12.5G -> 10G
A2/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(8G) = 12.5G -> 10G
A3/elow = parent_elow(10G) * low_usage(8G) / siblings_low_usage(8G) = 10.0G
(the 12.5G are capped to the explicit memory.low setting of 10G)
With that, the sum of all awarded protection below A is 30G, when A
only grants 10G for the entire subtree.
What does this mean in practice? A1 and A2 would still be in excess of
their 10G allowance and would be reclaimed, whereas A3 would not. As
they eventually drop below their protection setting, they would be
counted in siblings_low_usage again and the error would right itself.
When reclaim was applied in a binary fashion (cgroup is reclaimed when
it's above its protection, otherwise it's skipped) this would actually
work out just fine. However, since 1bc63fb1272b ("mm, memcg: make scan
aggression always exclude protection"), reclaim pressure is scaled to
how much a cgroup is above its protection. As a result this
calculation error unduly skews pressure away from A1 and A2 toward the
rest of the system.
But why did we do it like this in the first place?
The reasoning behind exempting groups in excess from
siblings_low_usage was to go after them first during reclaim in an
overcommitted subtree:
A/memory.low = 2G, memory.current = 4G
A/A1/memory.low = 3G, memory.current = 2G
A/A2/memory.low = 1G, memory.current = 2G
siblings_low_usage = 2G (only A1 contributes)
A1/elow = parent_elow(2G) * low_usage(2G) / siblings_low_usage(2G) = 2G
A2/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(2G) = 1G
While the children combined are overcomitting A and are technically
both at fault, A2 is actively declaring unprotected memory and we
would like to reclaim that first.
However, while this sounds like a noble goal on the face of it, it
doesn't make much difference in actual memory distribution: Because A
is overcommitted, reclaim will not stop once A2 gets pushed back to
within its allowance; we'll have to reclaim A1 either way. The end
result is still that protection is distributed proportionally, with A1
getting 3/4 (1.5G) and A2 getting 1/4 (0.5G) of A's allowance.
[ If A weren't overcommitted, it wouldn't make a difference since each
cgroup would just get the protection it declares:
A/memory.low = 2G, memory.current = 3G
A/A1/memory.low = 1G, memory.current = 1G
A/A2/memory.low = 1G, memory.current = 2G
With the current calculation:
siblings_low_usage = 1G (only A1 contributes)
A1/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(1G) = 2G -> 1G
A2/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(1G) = 2G -> 1G
Including excess groups in siblings_low_usage:
siblings_low_usage = 2G
A1/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(2G) = 1G -> 1G
A2/elow = parent_elow(2G) * low_usage(1G) / siblings_low_usage(2G) = 1G -> 1G ]
Simplify the calculation and fix the proportional reclaim bug by
including excess cgroups in siblings_low_usage.
After this patch, the effective memory.low distribution from the
example above would be as follows:
A/memory.low = 10G
A/A1/memory.low = 10G, memory.current = 20G
A/A2/memory.low = 10G, memory.current = 20G
A/A3/memory.low = 10G, memory.current = 8G
siblings_low_usage = 28G
A1/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(28G) = 3.5G
A2/elow = parent_elow(10G) * low_usage(10G) / siblings_low_usage(28G) = 3.5G
A3/elow = parent_elow(10G) * low_usage(8G) / siblings_low_usage(28G) = 2.8G
Fixes: 1bc63fb1272b ("mm, memcg: make scan aggression always exclude protection")
Fixes: 230671533d64 ("mm: memory.low hierarchical behavior")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Link: http://lkml.kernel.org/r/20200227195606.46212-2-hannes@cmpxchg.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Drop the _memcg suffix from (__)memcg_kmem_(un)charge functions. It's
shorter and more obvious.
These are the most basic functions which are just (un)charging the given
cgroup with the given amount of pages.
Also fix up the corresponding comments.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-7-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are many places in memcg_charge_slab() and memcg_uncharge_slab()
which are calculating the number of pages to charge, css references to
grab etc depending on the order of the slab page.
Let's simplify the code by calculating it once and caching in the local
variable.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-6-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These functions are charging the given number of kernel pages to the given
memory cgroup. The number doesn't have to be a power of two. Let's make
them to take the unsigned int nr_pages as an argument instead of the page
order.
It makes them look consistent with the corresponding uncharge functions
and functions like: mem_cgroup_charge_skmem(memcg, nr_pages).
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename (__)memcg_kmem_(un)charge() into (__)memcg_kmem_(un)charge_page()
to better reflect what they are actually doing:
1) call __memcg_kmem_(un)charge_memcg() to actually charge or uncharge
the current memcg
2) set or clear the PageKmemcg flag
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Drop the unused page argument and put the memcg pointer at the first
place. This make the function consistent with its peers:
__memcg_kmem_uncharge_memcg(), memcg_kmem_charge_memcg(), etc.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: memcg: kmem API cleanup", v2.
This patchset aims to clean up the kernel memory charging API. It doesn't
bring any functional changes, just removes unused arguments, renames some
functions and fixes some comments.
Currently it's not obvious which functions are most basic
(memcg_kmem_(un)charge_memcg()) and which are based on them
(memcg_kmem_(un)charge()). The patchset renames these functions and
removes unused arguments:
TL;DR:
was:
memcg_kmem_charge_memcg(page, gfp, order, memcg)
memcg_kmem_uncharge_memcg(memcg, nr_pages)
memcg_kmem_charge(page, gfp, order)
memcg_kmem_uncharge(page, order)
now:
memcg_kmem_charge(memcg, gfp, nr_pages)
memcg_kmem_uncharge(memcg, nr_pages)
memcg_kmem_charge_page(page, gfp, order)
memcg_kmem_uncharge_page(page, order)
This patch (of 6):
The first argument of memcg_kmem_charge_memcg() and
__memcg_kmem_charge_memcg() is the page pointer and it's not used. Let's
drop it.
Memcg pointer is passed as the last argument. Move it to the first place
for consistency with other memcg functions, e.g.
__memcg_kmem_uncharge_memcg() or try_charge().
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200109202659.752357-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Sometimes we need to get a memcg pointer from a charged kernel object.
The right way to get it depends on whether it's a proper slab object or
it's backed by raw pages (e.g. it's a vmalloc alloction). In the first
case the kmem_cache->memcg_params.memcg indirection should be used; in
other cases it's just page->mem_cgroup.
To simplify this task and hide the implementation details let's use the
mem_cgroup_from_obj() helper, which takes a pointer to any kernel object
and returns a valid memcg pointer or NULL.
Passing a kernel address rather than a pointer to a page will allow to use
this helper for per-object (rather than per-page) tracked objects in the
future.
The caller is still responsible to ensure that the returned memcg isn't
going away underneath: take the rcu read lock, cgroup mutex etc; depending
on the context.
mem_cgroup_from_kmem() defined in mm/list_lru.c is now obsolete and can be
removed.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/20200117203609.3146239-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The shrinker_map may be touched from any cpu (e.g., a bit there may be set
by a task running everywhere) but kswapd is always bound to specific node.
So allocate shrinker_map from the related NUMA node to respect its NUMA
locality. Also, this follows generic way we use for allocation of memcg's
per-node data.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: http://lkml.kernel.org/r/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When I manually set default n to MEMCG_KMEM in init/Kconfig, bellow error
occurs,
mm/slab_common.c: In function 'memcg_slab_start':
mm/slab_common.c:1530:30: error: 'struct mem_cgroup' has no member named
'kmem_caches'
return seq_list_start(&memcg->kmem_caches, *pos);
^
mm/slab_common.c: In function 'memcg_slab_next':
mm/slab_common.c:1537:32: error: 'struct mem_cgroup' has no member named
'kmem_caches'
return seq_list_next(p, &memcg->kmem_caches, pos);
^
mm/slab_common.c: In function 'memcg_slab_show':
mm/slab_common.c:1551:16: error: 'struct mem_cgroup' has no member named
'kmem_caches'
if (p == memcg->kmem_caches.next)
^
CC arch/x86/xen/smp.o
mm/slab_common.c: In function 'memcg_slab_start':
mm/slab_common.c:1531:1: warning: control reaches end of non-void function
[-Wreturn-type]
}
^
mm/slab_common.c: In function 'memcg_slab_next':
mm/slab_common.c:1538:1: warning: control reaches end of non-void function
[-Wreturn-type]
}
^
That's because kmem_caches is defined only when CONFIG_MEMCG_KMEM is set,
while memcg_slab_start() will use it no matter CONFIG_MEMCG_KMEM is defined
or not.
By the way, the reason I mannuly undefined CONFIG_MEMCG_KMEM is to verify
whether my some other code change is still stable when CONFIG_MEMCG_KMEM is
not set. Unfortunately, the existing code has been already unstable since
v4.11.
Fixes: bc2791f857e1 ("slab: link memcg kmem_caches on their associated memory cgroup")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/1580970260-2045-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
[add_to|delete_from]_swap_cache
add_to_swap_cache() and delete_from_swap_cache() are counterparts, while
currently they use different ways to count pages.
It doesn't break anything because we only have two sizes for PageAnon, but
this is confusing and not good practice.
This patch corrects it by making both functions use hpage_nr_pages().
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200315012920.2687-1-richard.weiyang@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Memory barrier is needed after setting LRU bit, but smp_mb() is too
strong. Some architectures, i.e. x86, imply memory barrier with atomic
operations, so replacing it with smp_mb__after_atomic() sounds better,
which is nop on strong ordered machines, and full memory barriers on
others. With this change the vm-scalability cases would perform better on
x86, I saw total 6% improvement with this patch and previous inline fix.
The test data (lru-file-readtwice throughput) against v5.6-rc4:
mainline w/ inline fix w/ both (adding this)
150MB 154MB 159MB
Fixes: 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping pagevecs")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: http://lkml.kernel.org/r/1584500541-46817-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When backporting commit 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping
pagevecs") to our 4.9 kernel, our test bench noticed around 10% down with
a couple of vm-scalability's test cases (lru-file-readonce,
lru-file-readtwice and lru-file-mmap-read). I didn't see that much down
on my VM (32c-64g-2nodes). It might be caused by the test configuration,
which is 32c-256g with NUMA disabled and the tests were run in root memcg,
so the tests actually stress only one inactive and active lru. It sounds
not very usual in mordern production environment.
That commit did two major changes:
1. Call page_evictable()
2. Use smp_mb to force the PG_lru set visible
It looks they contribute the most overhead. The page_evictable() is a
function which does function prologue and epilogue, and that was used by
page reclaim path only. However, lru add is a very hot path, so it sounds
better to make it inline. However, it calls page_mapping() which is not
inlined either, but the disassemble shows it doesn't do push and pop
operations and it sounds not very straightforward to inline it.
Other than this, it sounds smp_mb() is not necessary for x86 since
SetPageLRU is atomic which enforces memory barrier already, replace it
with smp_mb__after_atomic() in the following patch.
With the two fixes applied, the tests can get back around 5% on that test
bench and get back normal on my VM. Since the test bench configuration is
not that usual and I also saw around 6% up on the latest upstream, so it
sounds good enough IMHO.
The below is test data (lru-file-readtwice throughput) against the v5.6-rc4:
mainline w/ inline fix
150MB 154MB
With this patch the throughput gets 2.67% up. The data with using
smp_mb__after_atomic() is showed in the following patch.
Shakeel Butt did the below test:
On a real machine with limiting the 'dd' on a single node and reading 100
GiB sparse file (less than a single node). Just ran a single instance to
not cause the lru lock contention. The cmdline used is "dd if=file-100GiB
of=/dev/null bs=4k". Ran the cmd 10 times with drop_caches in between and
measured the time it took.
Without patch: 56.64143 +- 0.672 sec
With patches: 56.10 +- 0.21 sec
[akpm@linux-foundation.org: move page_evictable() to internal.h]
Fixes: 9c4e6b1a7027 ("mm, mlock, vmscan: no more skipping pagevecs")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1584500541-46817-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we use a tmp pointer, pentry, to transfer and reset swap cache
slot, which is a little redundant. Swap cache slot stores the entry value
directly, assign and reset it by value would be straight forward.
Also this patch merges the else and if, since this is the only case we
refill and repeat swap cache.
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20200311055352.50574-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
si->inuse_pages could be accessed concurrently as noticed by KCSAN,
write to 0xffff98b00ebd04dc of 4 bytes by task 82262 on cpu 92:
swap_range_free+0xbe/0x230
swap_range_free at mm/swapfile.c:719
swapcache_free_entries+0x1be/0x250
free_swap_slot+0x1c8/0x220
__swap_entry_free.constprop.19+0xa3/0xb0
free_swap_and_cache+0x53/0xa0
unmap_page_range+0x7e0/0x1ce0
unmap_single_vma+0xcd/0x170
unmap_vmas+0x18b/0x220
exit_mmap+0xee/0x220
mmput+0xe7/0x240
do_exit+0x598/0xfd0
do_group_exit+0x8b/0x180
get_signal+0x293/0x13d0
do_signal+0x37/0x5d0
prepare_exit_to_usermode+0x1b7/0x2c0
ret_from_intr+0x32/0x42
read to 0xffff98b00ebd04dc of 4 bytes by task 82499 on cpu 46:
try_to_unuse+0x86b/0xc80
try_to_unuse at mm/swapfile.c:2185
__x64_sys_swapoff+0x372/0xd40
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The plain reads in try_to_unuse() are outside si->lock critical section
which result in data races that could be dangerous to be used in a loop.
Fix them by adding READ_ONCE().
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Marco Elver <elver@google.com>
Cc: Hugh Dickins <hughd@google.com>
Link: http://lkml.kernel.org/r/1582578903-29294-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__pagevec_lru_add() is only used in mm directory now.
Remove the export symbol.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200126011436.22979-1-richardw.yang@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The -EEXIST returned by __swap_duplicate means there is a swap cache
instead -EBUSY
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200212145754.27123-1-chenwandun@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
FOLL_LONGTERM is a special case of FOLL_PIN. It suggests a pin which is
going to be given to hardware and can't move. It would truncate CMA
permanently and should be excluded.
In gup slow path, where
__gup_longterm_locked->check_and_migrate_cma_pages() handles
FOLL_LONGTERM, but in fast path, there lacks such a check, which means a
possible leak of CMA page to longterm pinned.
Place a check in try_grab_compound_head() in the fast path to fix the
leak, and if FOLL_LONGTERM happens on CMA, it will fall back to slow path
to migrate the page.
Some note about the check: Huge page's subpages have the same migrate type
due to either allocation from a free_list[] or alloc_contig_range() with
param MIGRATE_MOVABLE. So it is enough to check on a single subpage by
is_migrate_cma_page(subpage)
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/1584876733-17405-3-git-send-email-kernelfans@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To better reflect the held state of pages and make code self-explaining,
rename nr as nr_pinned.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: http://lkml.kernel.org/r/1584876733-17405-2-git-send-email-kernelfans@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With the introduction of protected KVM guests on s390 there is now a
concept of inaccessible pages. These pages need to be made accessible
before the host can access them.
While cpu accesses will trigger a fault that can be resolved, I/O accesses
will just fail. We need to add a callback into architecture code for
places that will do I/O, namely when writeback is started or when a page
reference is taken.
This is not only to enable paging, file backing etc, it is also necessary
to protect the host against a malicious user space. For example a bad
QEMU could simply start direct I/O on such protected memory. We do not
want userspace to be able to trigger I/O errors and thus the logic is
"whenever somebody accesses that page (gup) or does I/O, make sure that
this page can be accessed". When the guest tries to access that page we
will wait in the page fault handler for writeback to have finished and for
the page_ref to be the expected value.
On s390x the function is not supposed to fail, so it is ok to use a
WARN_ON on failure. If we ever need some more finegrained handling we can
tackle this when we know the details.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200306132537.783769-3-imbrenda@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As part of pin_user_pages() and related API calls, pages are "dma-pinned".
For the case of compound pages of order > 1, the per-page accounting of
dma pins is accomplished via the 3rd struct page in the compound page. In
order to support debugging of any pin_user_pages()- related problems,
enhance dump_page() so as to report the pin count in that case.
Documentation/core-api/pin_user_pages.rst is also updated accordingly.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-13-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There was no protection against a corrupted struct page having an
implausible compound_head(). Sanity check that a compound page has a head
within reach of the maximum allocatable page (this will need to be
adjusted if one of the plans to allocate 1GB pages comes to fruition). In
addition,
- Print the mapping pointer using %p insted of %px. The actual value of
the pointer can be read out of the raw page dump and using %p gives a
chance to correlate it with an earlier printk of the mapping pointer
- Print the mapping pointer from the head page, not the tail page
(the tail ->mapping pointer may be in use for other purposes, eg part
of a list_head)
- Print the order of the page for compound pages
- Dump the raw head page as well as the raw page
- Print the refcount from the head page, not the tail page
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Co-developed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-12-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Up until now, gup_benchmark supported testing of the following kernel
functions:
* get_user_pages(): via the '-U' command line option
* get_user_pages_longterm(): via the '-L' command line option
* get_user_pages_fast(): as the default (no options required)
Add test coverage for the new corresponding pin_*() functions:
* pin_user_pages_fast(): via the '-a' command line option
* pin_user_pages(): via the '-b' command line option
Also, add an option for clarity: '-u' for what is now (still) the default
choice: get_user_pages_fast().
Also, for the commands that set FOLL_PIN, verify that the pages really are
dma-pinned, via the new is_dma_pinned() routine. Those commands are:
PIN_FAST_BENCHMARK : calls pin_user_pages_fast()
PIN_BENCHMARK : calls pin_user_pages()
In between the calls to pin_*() and unpin_user_pages(), check each page:
if page_maybe_dma_pinned() returns false, then WARN and return.
Do this outside of the benchmark timestamps, so that it doesn't affect
reported times.
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/20200211001536.1027652-10-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
