| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "memory-failure: fix hwpoison_filter", v2.
As well known, the memory failure mechanism handles memory corrupted
event, and try to send SIGBUS to the user process which uses this
corrupted page.
For the virtualization case, QEMU catches SIGBUS and tries to inject MCE
into the guest, and the guest handles memory failure again. Thus the
guest gets the minimal effect from hardware memory corruption.
The further step I'm working on:
1, try to modify code to decrease poisoned pages in a single place
(mm/memofy-failure.c: simplify num_poisoned_pages_dec in this series).
2, try to use page_handle_poison() to handle SetPageHWPoison() and
num_poisoned_pages_inc() together. It would be best to call
num_poisoned_pages_inc() in a single place too.
3, introduce memory failure notifier list in memory-failure.c: notify
the corrupted PFN to someone who registers this list. If I can
complete [1] and [2] part, [3] will be quite easy(just call notifier
list after increasing poisoned page).
4, introduce memory recover VQ for memory balloon device, and registers
memory failure notifier list. During the guest kernel handles memory
failure, balloon device gets notified by memory failure notifier list,
and tells the host to recover the corrupted PFN(GPA) by the new VQ.
5, host side remaps the corrupted page(HVA), and tells the guest side
to unpoison the PFN(GPA). Then the guest fixes the corrupted page(GPA)
dynamically.
This patch (of 5):
clear_hwpoisoned_pages() clears HWPoison flag and decreases the number of
poisoned pages, this actually works as part of memory failure.
Move this function from sparse.c to memory-failure.c, finally there is no
CONFIG_MEMORY_FAILURE in sparse.c.
Link: https://lkml.kernel.org/r/20220509105641.491313-1-pizhenwei@bytedance.com
Link: https://lkml.kernel.org/r/20220509105641.491313-2-pizhenwei@bytedance.com
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "sparse-vmemmap: memory savings for compound devmaps (device-dax)", v9.
This series minimizes 'struct page' overhead by pursuing a similar
approach as Muchun Song series "Free some vmemmap pages of hugetlb page"
(now merged since v5.14), but applied to devmap with @vmemmap_shift
(device-dax).
The vmemmap dedpulication original idea (already used in HugeTLB) is to
reuse/deduplicate tail page vmemmap areas, particular the area which only
describes tail pages. So a vmemmap page describes 64 struct pages, and
the first page for a given ZONE_DEVICE vmemmap would contain the head page
and 63 tail pages. The second vmemmap page would contain only tail pages,
and that's what gets reused across the rest of the subsection/section.
The bigger the page size, the bigger the savings (2M hpage -> save 6
vmemmap pages; 1G hpage -> save 4094 vmemmap pages).
This is done for PMEM /specifically only/ on device-dax configured
namespaces, not fsdax. In other words, a devmap with a @vmemmap_shift.
In terms of savings, per 1Tb of memory, the struct page cost would go down
with compound devmap:
* with 2M pages we lose 4G instead of 16G (0.39% instead of 1.5% of
total memory)
* with 1G pages we lose 40MB instead of 16G (0.0014% instead of 1.5% of
total memory)
The series is mostly summed up by patch 4, and to summarize what the
series does:
Patches 1 - 3: Minor cleanups in preparation for patch 4. Move the very
nice docs of hugetlb_vmemmap.c into a Documentation/vm/ entry.
Patch 4: Patch 4 is the one that takes care of the struct page savings
(also referred to here as tail-page/vmemmap deduplication). Much like
Muchun series, we reuse the second PTE tail page vmemmap areas across a
given @vmemmap_shift On important difference though, is that contrary to
the hugetlbfs series, there's no vmemmap for the area because we are
late-populating it as opposed to remapping a system-ram range. IOW no
freeing of pages of already initialized vmemmap like the case for
hugetlbfs, which greatly simplifies the logic (besides not being
arch-specific). altmap case unchanged and still goes via the
vmemmap_populate(). Also adjust the newly added docs to the device-dax
case.
[Note that device-dax is still a little behind HugeTLB in terms of
savings. I have an additional simple patch that reuses the head vmemmap
page too, as a follow-up. That will double the savings and namespaces
initialization.]
Patch 5: Initialize fewer struct pages depending on the page size with
DRAM backed struct pages -- because fewer pages are unique and most tail
pages (with bigger vmemmap_shift).
NVDIMM namespace bootstrap improves from ~268-358 ms to
~80-110/<1ms on 128G NVDIMMs with 2M and 1G respectivally. And struct
page needed capacity will be 3.8x / 1071x smaller for 2M and 1G
respectivelly. Tested on x86 with 1.5Tb of pmem (including pinning,
and RDMA registration/deregistration scalability with 2M MRs)
This patch (of 5):
In support of using compound pages for devmap mappings, plumb the pgmap
down to the vmemmap_populate implementation. Note that while altmap is
retrievable from pgmap the memory hotplug code passes altmap without
pgmap[*], so both need to be independently plumbed.
So in addition to @altmap, pass @pgmap to sparse section populate
functions namely:
sparse_add_section
section_activate
populate_section_memmap
__populate_section_memmap
Passing @pgmap allows __populate_section_memmap() to both fetch the
vmemmap_shift in which memmap metadata is created for and also to let
sparse-vmemmap fetch pgmap ranges to co-relate to a given section and pick
whether to just reuse tail pages from past onlined sections.
While at it, fix the kdoc for @altmap for sparse_add_section().
[*] https://lore.kernel.org/linux-mm/20210319092635.6214-1-osalvador@suse.de/
Link: https://lkml.kernel.org/r/20220420155310.9712-1-joao.m.martins@oracle.com
Link: https://lkml.kernel.org/r/20220420155310.9712-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It's only used in the sparse.c now. So we can make it static and further
clean up the relevant code.
Link: https://lkml.kernel.org/r/20220127093221.63524-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
page->freelist is for the use of slab. Using page->index is the same
set of bits as page->freelist, and by using an integer instead of a
pointer, we can avoid casts.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: <x86@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
|
|
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memblock_free_early_nid() is unused and memblock_free_early() is an
alias for memblock_free().
Replace calls to memblock_free_early() with calls to memblock_free() and
remove memblock_free_early() and memblock_free_early_nid().
Link: https://lkml.kernel.org/r/20210930185031.18648-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several places that allocate memory for the memory map:
alloc_node_mem_map() for FLATMEM, sparse_buffer_init() and
__populate_section_memmap() for SPARSEMEM.
The memory allocated in the FLATMEM case is zeroed and it is never
poisoned, regardless of CONFIG_PAGE_POISON setting.
The memory allocated in the SPARSEMEM cases is not zeroed and it is
implicitly poisoned inside memblock if CONFIG_PAGE_POISON is set.
Introduce memmap_alloc() wrapper for memblock allocators that will be used
for both FLATMEM and SPARSEMEM cases and will makei memory map zeroing and
poisoning consistent for different memory models.
Link: https://lkml.kernel.org/r/20210714123739.16493-4-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Clarify pgdat_to_phys() by testing if
pgdat == &contig_page_data when CONFIG_NUMA=n.
We only expect contig_page_data in such case, so we
use &contig_page_data directly instead of pgdat.
No functional change intended when CONFIG_BUG_VM=n.
Comment from Mark [1]:
"
... and I reckon it'd be clearer and more robust to define
pgdat_to_phys() in the same ifdefs as contig_page_data so
that these, stay in-sync. e.g. have:
| #ifdef CONFIG_NUMA
| #define pgdat_to_phys(x) virt_to_phys(x)
| #else /* CONFIG_NUMA */
|
| extern struct pglist_data contig_page_data;
| ...
| #define pgdat_to_phys(x) __pa_symbol(&contig_page_data)
|
| #endif /* CONIFIG_NUMA */
"
[1] https://lore.kernel.org/linux-arm-kernel/20210615131902.GB47121@C02TD0UTHF1T.local/
Link: https://lkml.kernel.org/r/20210723123342.26406-1-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
cppcheck warns that we're possibly losing information by shifting an int.
It's a false positive, because we don't allow for a NUMA node ID that
large, but if we ever change SECTION_NID_SHIFT, it could become a problem,
and in any case this is usually a legitimate warning. Fix it by adding
the necessary cast, which makes the compiler generate the right code.
Link: https://lkml.kernel.org/r/YOya+aBZFFmC476e@casper.infradead.org
Link: https://lkml.kernel.org/r/202107130348.6LsVT9Nc-lkp@intel.com
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As the last users of __section_nr() are gone, let's remove unused function
__section_nr().
Link: https://lkml.kernel.org/r/20210707150212.855-4-ohoono.kwon@samsung.com
Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: sparse: remove __section_nr() function", v4.
This patch (of 3):
With CONFIG_SPARSEMEM_EXTREME enabled, __section_nr() which converts
mem_section to section_nr could be costly since it iterates all section
roots to check if the given mem_section is in its range.
Since both callers of section_mark_present already know section_nr, let's
also pass section_nr as well as mem_section in order to reduce costly
translation.
Link: https://lkml.kernel.org/r/20210707150212.855-1-ohoono.kwon@samsung.com
Link: https://lkml.kernel.org/r/20210707150212.855-2-ohoono.kwon@samsung.com
Signed-off-by: Ohhoon Kwon <ohoono.kwon@samsung.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Free some vmemmap pages of HugeTLB page", v23.
This patch series will free some vmemmap pages(struct page structures)
associated with each HugeTLB page when preallocated to save memory.
In order to reduce the difficulty of the first version of code review. In
this version, we disable PMD/huge page mapping of vmemmap if this feature
was enabled. This acutely eliminates a bunch of the complex code doing
page table manipulation. When this patch series is solid, we cam add the
code of vmemmap page table manipulation in the future.
The struct page structures (page structs) are used to describe a physical
page frame. By default, there is an one-to-one mapping from a page frame
to it's corresponding page struct.
The HugeTLB pages consist of multiple base page size pages and is
supported by many architectures. See hugetlbpage.rst in the Documentation
directory for more details. On the x86 architecture, HugeTLB pages of
size 2MB and 1GB are currently supported. Since the base page size on x86
is 4KB, a 2MB HugeTLB page consists of 512 base pages and a 1GB HugeTLB
page consists of 4096 base pages. For each base page, there is a
corresponding page struct.
Within the HugeTLB subsystem, only the first 4 page structs are used to
contain unique information about a HugeTLB page. HUGETLB_CGROUP_MIN_ORDER
provides this upper limit. The only 'useful' information in the remaining
page structs is the compound_head field, and this field is the same for
all tail pages.
By removing redundant page structs for HugeTLB pages, memory can returned
to the buddy allocator for other uses.
When the system boot up, every 2M HugeTLB has 512 struct page structs which
size is 8 pages(sizeof(struct page) * 512 / PAGE_SIZE).
HugeTLB struct pages(8 pages) page frame(8 pages)
+-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+
| | | 0 | -------------> | 0 |
| | +-----------+ +-----------+
| | | 1 | -------------> | 1 |
| | +-----------+ +-----------+
| | | 2 | -------------> | 2 |
| | +-----------+ +-----------+
| | | 3 | -------------> | 3 |
| | +-----------+ +-----------+
| | | 4 | -------------> | 4 |
| 2MB | +-----------+ +-----------+
| | | 5 | -------------> | 5 |
| | +-----------+ +-----------+
| | | 6 | -------------> | 6 |
| | +-----------+ +-----------+
| | | 7 | -------------> | 7 |
| | +-----------+ +-----------+
| |
| |
| |
+-----------+
The value of page->compound_head is the same for all tail pages. The
first page of page structs (page 0) associated with the HugeTLB page
contains the 4 page structs necessary to describe the HugeTLB. The only
use of the remaining pages of page structs (page 1 to page 7) is to point
to page->compound_head. Therefore, we can remap pages 2 to 7 to page 1.
Only 2 pages of page structs will be used for each HugeTLB page. This
will allow us to free the remaining 6 pages to the buddy allocator.
Here is how things look after remapping.
HugeTLB struct pages(8 pages) page frame(8 pages)
+-----------+ ---virt_to_page---> +-----------+ mapping to +-----------+
| | | 0 | -------------> | 0 |
| | +-----------+ +-----------+
| | | 1 | -------------> | 1 |
| | +-----------+ +-----------+
| | | 2 | ----------------^ ^ ^ ^ ^ ^
| | +-----------+ | | | | |
| | | 3 | ------------------+ | | | |
| | +-----------+ | | | |
| | | 4 | --------------------+ | | |
| 2MB | +-----------+ | | |
| | | 5 | ----------------------+ | |
| | +-----------+ | |
| | | 6 | ------------------------+ |
| | +-----------+ |
| | | 7 | --------------------------+
| | +-----------+
| |
| |
| |
+-----------+
When a HugeTLB is freed to the buddy system, we should allocate 6 pages
for vmemmap pages and restore the previous mapping relationship.
Apart from 2MB HugeTLB page, we also have 1GB HugeTLB page. It is similar
to the 2MB HugeTLB page. We also can use this approach to free the
vmemmap pages.
In this case, for the 1GB HugeTLB page, we can save 4094 pages. This is a
very substantial gain. On our server, run some SPDK/QEMU applications
which will use 1024GB HugeTLB page. With this feature enabled, we can
save ~16GB (1G hugepage)/~12GB (2MB hugepage) memory.
Because there are vmemmap page tables reconstruction on the
freeing/allocating path, it increases some overhead. Here are some
overhead analysis.
1) Allocating 10240 2MB HugeTLB pages.
a) With this patch series applied:
# time echo 10240 > /proc/sys/vm/nr_hugepages
real 0m0.166s
user 0m0.000s
sys 0m0.166s
# bpftrace -e 'kprobe:alloc_fresh_huge_page { @start[tid] = nsecs; }
kretprobe:alloc_fresh_huge_page /@start[tid]/ { @latency = hist(nsecs -
@start[tid]); delete(@start[tid]); }'
Attaching 2 probes...
@latency:
[8K, 16K) 5476 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[16K, 32K) 4760 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[32K, 64K) 4 | |
b) Without this patch series:
# time echo 10240 > /proc/sys/vm/nr_hugepages
real 0m0.067s
user 0m0.000s
sys 0m0.067s
# bpftrace -e 'kprobe:alloc_fresh_huge_page { @start[tid] = nsecs; }
kretprobe:alloc_fresh_huge_page /@start[tid]/ { @latency = hist(nsecs -
@start[tid]); delete(@start[tid]); }'
Attaching 2 probes...
@latency:
[4K, 8K) 10147 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[8K, 16K) 93 | |
Summarize: this feature is about ~2x slower than before.
2) Freeing 10240 2MB HugeTLB pages.
a) With this patch series applied:
# time echo 0 > /proc/sys/vm/nr_hugepages
real 0m0.213s
user 0m0.000s
sys 0m0.213s
# bpftrace -e 'kprobe:free_pool_huge_page { @start[tid] = nsecs; }
kretprobe:free_pool_huge_page /@start[tid]/ { @latency = hist(nsecs -
@start[tid]); delete(@start[tid]); }'
Attaching 2 probes...
@latency:
[8K, 16K) 6 | |
[16K, 32K) 10227 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[32K, 64K) 7 | |
b) Without this patch series:
# time echo 0 > /proc/sys/vm/nr_hugepages
real 0m0.081s
user 0m0.000s
sys 0m0.081s
# bpftrace -e 'kprobe:free_pool_huge_page { @start[tid] = nsecs; }
kretprobe:free_pool_huge_page /@start[tid]/ { @latency = hist(nsecs -
@start[tid]); delete(@start[tid]); }'
Attaching 2 probes...
@latency:
[4K, 8K) 6805 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
[8K, 16K) 3427 |@@@@@@@@@@@@@@@@@@@@@@@@@@ |
[16K, 32K) 8 | |
Summary: The overhead of __free_hugepage is about ~2-3x slower than before.
Although the overhead has increased, the overhead is not significant.
Like Mike said, "However, remember that the majority of use cases create
HugeTLB pages at or shortly after boot time and add them to the pool. So,
additional overhead is at pool creation time. There is no change to
'normal run time' operations of getting a page from or returning a page to
the pool (think page fault/unmap)".
Despite the overhead and in addition to the memory gains from this series.
The following data is obtained by Joao Martins. Very thanks to his
effort.
There's an additional benefit which is page (un)pinners will see an improvement
and Joao presumes because there are fewer memmap pages and thus the tail/head
pages are staying in cache more often.
Out of the box Joao saw (when comparing linux-next against linux-next +
this series) with gup_test and pinning a 16G HugeTLB file (with 1G pages):
get_user_pages(): ~32k -> ~9k
unpin_user_pages(): ~75k -> ~70k
Usually any tight loop fetching compound_head(), or reading tail pages
data (e.g. compound_head) benefit a lot. There's some unpinning
inefficiencies Joao was fixing[2], but with that in added it shows even
more:
unpin_user_pages(): ~27k -> ~3.8k
[1] https://lore.kernel.org/linux-mm/20210409205254.242291-1-mike.kravetz@oracle.com/
[2] https://lore.kernel.org/linux-mm/20210204202500.26474-1-joao.m.martins@oracle.com/
This patch (of 9):
Move bootmem info registration common API to individual bootmem_info.c.
And we will use {get,put}_page_bootmem() to initialize the page for the
vmemmap pages or free the vmemmap pages to buddy in the later patch. So
move them out of CONFIG_MEMORY_HOTPLUG_SPARSE. This is just code movement
without any functional change.
Link: https://lkml.kernel.org/r/20210510030027.56044-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20210510030027.56044-2-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Tested-by: Chen Huang <chenhuang5@huawei.com>
Tested-by: Bodeddula Balasubramaniam <bodeddub@amazon.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Mina Almasry <almasrymina@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: HORIGUCHI NAOYA <naoya.horiguchi@nec.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After removal of DISCINTIGMEM the NEED_MULTIPLE_NODES and NUMA
configuration options are equivalent.
Drop CONFIG_NEED_MULTIPLE_NODES and use CONFIG_NUMA instead.
Done with
$ sed -i 's/CONFIG_NEED_MULTIPLE_NODES/CONFIG_NUMA/' \
$(git grep -wl CONFIG_NEED_MULTIPLE_NODES)
$ sed -i 's/NEED_MULTIPLE_NODES/NUMA/' \
$(git grep -wl NEED_MULTIPLE_NODES)
with manual tweaks afterwards.
[rppt@linux.ibm.com: fix arm boot crash]
Link: https://lkml.kernel.org/r/YMj9vHhHOiCVN4BF@linux.ibm.com
Link: https://lkml.kernel.org/r/20210608091316.3622-9-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I see a "virt_to_phys used for non-linear address" warning from
check_usemap_section_nr() on arm64 platforms.
In current implementation of NODE_DATA, if CONFIG_NEED_MULTIPLE_NODES=y,
pglist_data is dynamically allocated and assigned to node_data[].
For example, in arch/arm64/include/asm/mmzone.h:
extern struct pglist_data *node_data[];
#define NODE_DATA(nid) (node_data[(nid)])
If CONFIG_NEED_MULTIPLE_NODES=n, pglist_data is defined as a global
variable named "contig_page_data".
For example, in include/linux/mmzone.h:
extern struct pglist_data contig_page_data;
#define NODE_DATA(nid) (&contig_page_data)
If CONFIG_DEBUG_VIRTUAL is not enabled, __pa() can handle both
dynamically allocated linear addresses and symbol addresses. However,
if (CONFIG_DEBUG_VIRTUAL=y && CONFIG_NEED_MULTIPLE_NODES=n) we can see
the "virt_to_phys used for non-linear address" warning because that
&contig_page_data is not a linear address on arm64.
Warning message:
virt_to_phys used for non-linear address: (contig_page_data+0x0/0x1c00)
WARNING: CPU: 0 PID: 0 at arch/arm64/mm/physaddr.c:15 __virt_to_phys+0x58/0x68
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.13.0-rc1-00074-g1140ab592e2e #3
Hardware name: linux,dummy-virt (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO BTYPE=--)
Call trace:
__virt_to_phys+0x58/0x68
check_usemap_section_nr+0x50/0xfc
sparse_init_nid+0x1ac/0x28c
sparse_init+0x1c4/0x1e0
bootmem_init+0x60/0x90
setup_arch+0x184/0x1f0
start_kernel+0x78/0x488
To fix it, create a small function to handle both translation.
Link: https://lkml.kernel.org/r/1623058729-27264-1-git-send-email-miles.chen@mediatek.com
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Kazu <k-hagio-ab@nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Various coding style tweaks to various files under mm/
[daizhiyuan@phytium.com.cn: mm/swapfile: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614223624-16055-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/sparse: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614227288-19363-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/vmscan: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614227649-19853-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/compaction: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614228218-20770-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/oom_kill: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614228360-21168-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/shmem: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614228504-21491-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/page_alloc: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614228613-21754-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/filemap: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1614228936-22337-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/mlock: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1613956588-2453-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/frontswap: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1613962668-15045-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/vmalloc: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1613963379-15988-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/memory_hotplug: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1613971784-24878-1-git-send-email-daizhiyuan@phytium.com.cn
[daizhiyuan@phytium.com.cn: mm/mempolicy: minor coding style tweaks]
Link: https://lkml.kernel.org/r/1613972228-25501-1-git-send-email-daizhiyuan@phytium.com.cn
Link: https://lkml.kernel.org/r/1614222374-13805-1-git-send-email-daizhiyuan@phytium.com.cn
Signed-off-by: Zhiyuan Dai <daizhiyuan@phytium.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Physical memory hotadd has to allocate a memmap (struct page array) for
the newly added memory section. Currently, alloc_pages_node() is used
for those allocations.
This has some disadvantages:
a) an existing memory is consumed for that purpose
(eg: ~2MB per 128MB memory section on x86_64)
This can even lead to extreme cases where system goes OOM because
the physically hotplugged memory depletes the available memory before
it is onlined.
b) if the whole node is movable then we have off-node struct pages
which has performance drawbacks.
c) It might be there are no PMD_ALIGNED chunks so memmap array gets
populated with base pages.
This can be improved when CONFIG_SPARSEMEM_VMEMMAP is enabled.
Vmemap page tables can map arbitrary memory. That means that we can
reserve a part of the physically hotadded memory to back vmemmap page
tables. This implementation uses the beginning of the hotplugged memory
for that purpose.
There are some non-obviously things to consider though.
Vmemmap pages are allocated/freed during the memory hotplug events
(add_memory_resource(), try_remove_memory()) when the memory is
added/removed. This means that the reserved physical range is not
online although it is used. The most obvious side effect is that
pfn_to_online_page() returns NULL for those pfns. The current design
expects that this should be OK as the hotplugged memory is considered a
garbage until it is onlined. For example hibernation wouldn't save the
content of those vmmemmaps into the image so it wouldn't be restored on
resume but this should be OK as there no real content to recover anyway
while metadata is reachable from other data structures (e.g. vmemmap
page tables).
The reserved space is therefore (de)initialized during the {on,off}line
events (mhp_{de}init_memmap_on_memory). That is done by extracting page
allocator independent initialization from the regular onlining path.
The primary reason to handle the reserved space outside of
{on,off}line_pages is to make each initialization specific to the
purpose rather than special case them in a single function.
As per above, the functions that are introduced are:
- mhp_init_memmap_on_memory:
Initializes vmemmap pages by calling move_pfn_range_to_zone(), calls
kasan_add_zero_shadow(), and onlines as many sections as vmemmap pages
fully span.
- mhp_deinit_memmap_on_memory:
Offlines as many sections as vmemmap pages fully span, removes the
range from zhe zone by remove_pfn_range_from_zone(), and calls
kasan_remove_zero_shadow() for the range.
The new function memory_block_online() calls mhp_init_memmap_on_memory()
before doing the actual online_pages(). Should online_pages() fail, we
clean up by calling mhp_deinit_memmap_on_memory(). Adjusting of
present_pages is done at the end once we know that online_pages()
succedeed.
On offline, memory_block_offline() needs to unaccount vmemmap pages from
present_pages() before calling offline_pages(). This is necessary because
offline_pages() tears down some structures based on the fact whether the
node or the zone become empty. If offline_pages() fails, we account back
vmemmap pages. If it succeeds, we call mhp_deinit_memmap_on_memory().
Hot-remove:
We need to be careful when removing memory, as adding and
removing memory needs to be done with the same granularity.
To check that this assumption is not violated, we check the
memory range we want to remove and if a) any memory block has
vmemmap pages and b) the range spans more than a single memory
block, we scream out loud and refuse to proceed.
If all is good and the range was using memmap on memory (aka vmemmap pages),
we construct an altmap structure so free_hugepage_table does the right
thing and calls vmem_altmap_free instead of free_pagetable.
Link: https://lkml.kernel.org/r/20210421102701.25051-5-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sparse_buffer_init() and sparse_buffer_fini() should appear in pair, or a
WARN issue would be through the next time sparse_buffer_init() runs.
Add the missing sparse_buffer_fini() in error branch.
Link: https://lkml.kernel.org/r/20210325113155.118574-1-wangwensheng4@huawei.com
Fixes: 85c77f791390 ("mm/sparse: add new sparse_init_nid() and sparse_init()")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We soon want to pass flags via a new type to add_memory() and friends.
That revealed that we currently don't guard some declarations by
CONFIG_MEMORY_HOTPLUG.
While some definitions could be moved to different places, let's keep it
minimal for now and use CONFIG_MEMORY_HOTPLUG for all functions only
compiled with CONFIG_MEMORY_HOTPLUG.
Wrap sparse_decode_mem_map() into CONFIG_MEMORY_HOTPLUG, it's only called
from CONFIG_MEMORY_HOTPLUG code.
While at it, remove allow_online_pfn_range(), which is no longer around,
and mhp_notimplemented(), which is unused.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Julien Grall <julien@xen.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Leonardo Bras <leobras.c@gmail.com>
Cc: Libor Pechacek <lpechacek@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pingfan Liu <kernelfans@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Liu <wei.liu@kernel.org>
Link: https://lkml.kernel.org/r/20200911103459.10306-4-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are several occurrences of the following pattern:
for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);
/* do something with start_pfn and end_pfn */
}
Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().
Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.
Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present()
and memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.
Also remove no longer required HAVE_MEMORY_PRESENT configuration option.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200712083130.22919-1-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
For early sections, its memmap is handled specially even sub-section is
enabled. The memmap could only be populated as a whole.
Quoted from the comment of section_activate():
* The early init code does not consider partially populated
* initial sections, it simply assumes that memory will never be
* referenced. If we hot-add memory into such a section then we
* do not need to populate the memmap and can simply reuse what
* is already there.
While current section_deactivate() breaks this rule. When hot-remove a
sub-section, section_deactivate() would depopulate its memmap. The
consequence is if we hot-add this subsection again, its memmap never get
proper populated.
We can reproduce the case by following steps:
1. Hacking qemu to allow sub-section early section
: diff --git a/hw/i386/pc.c b/hw/i386/pc.c
: index 51b3050d01..c6a78d83c0 100644
: --- a/hw/i386/pc.c
: +++ b/hw/i386/pc.c
: @@ -1010,7 +1010,7 @@ void pc_memory_init(PCMachineState *pcms,
: }
:
: machine->device_memory->base =
: - ROUND_UP(0x100000000ULL + x86ms->above_4g_mem_size, 1 * GiB);
: + 0x100000000ULL + x86ms->above_4g_mem_size;
:
: if (pcmc->enforce_aligned_dimm) {
: /* size device region assuming 1G page max alignment per slot */
2. Bootup qemu with PSE disabled and a sub-section aligned memory size
Part of the qemu command would look like this:
sudo x86_64-softmmu/qemu-system-x86_64 \
--enable-kvm -cpu host,pse=off \
-m 4160M,maxmem=20G,slots=1 \
-smp sockets=2,cores=16 \
-numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
-machine pc,nvdimm \
-nographic \
-object memory-backend-ram,id=mem0,size=8G \
-device nvdimm,id=vm0,memdev=mem0,node=0,addr=0x144000000,label-size=128k
3. Re-config a pmem device with sub-section size in guest
ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax --size=16M
Then you would see the following call trace:
pmem0: detected capacity change from 0 to 16777216
BUG: unable to handle page fault for address: ffffec73c51000b4
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 81ff8067 P4D 81ff8067 PUD 81ff7067 PMD 1437cb067 PTE 0
Oops: 0002 [#1] SMP NOPTI
CPU: 16 PID: 1348 Comm: ndctl Kdump: loaded Tainted: G W 5.8.0-rc2+ #24
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.4
RIP: 0010:memmap_init_zone+0x154/0x1c2
Code: 77 16 f6 40 10 02 74 10 48 03 48 08 48 89 cb 48 c1 eb 0c e9 3a ff ff ff 48 89 df 48 c1 e7 06 48f
RSP: 0018:ffffbdc7011a39b0 EFLAGS: 00010282
RAX: ffffec73c5100088 RBX: 0000000000144002 RCX: 0000000000144000
RDX: 0000000000000004 RSI: 007ffe0000000000 RDI: ffffec73c5100080
RBP: 027ffe0000000000 R08: 0000000000000001 R09: ffff9f8d38f6d708
R10: ffffec73c0000000 R11: 0000000000000000 R12: 0000000000000004
R13: 0000000000000001 R14: 0000000000144200 R15: 0000000000000000
FS: 00007efe6b65d780(0000) GS:ffff9f8d3f780000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffec73c51000b4 CR3: 000000007d718000 CR4: 0000000000340ee0
Call Trace:
move_pfn_range_to_zone+0x128/0x150
memremap_pages+0x4e4/0x5a0
devm_memremap_pages+0x1e/0x60
dev_dax_probe+0x69/0x160 [device_dax]
really_probe+0x298/0x3c0
driver_probe_device+0xe1/0x150
? driver_allows_async_probing+0x50/0x50
bus_for_each_drv+0x7e/0xc0
__device_attach+0xdf/0x160
bus_probe_device+0x8e/0xa0
device_add+0x3b9/0x740
__devm_create_dev_dax+0x127/0x1c0
__dax_pmem_probe+0x1f2/0x219 [dax_pmem_core]
dax_pmem_probe+0xc/0x1b [dax_pmem]
nvdimm_bus_probe+0x69/0x1c0 [libnvdimm]
really_probe+0x147/0x3c0
driver_probe_device+0xe1/0x150
device_driver_attach+0x53/0x60
bind_store+0xd1/0x110
kernfs_fop_write+0xce/0x1b0
vfs_write+0xb6/0x1a0
ksys_write+0x5f/0xe0
do_syscall_64+0x4d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200625223534.18024-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: cleanup usage of <asm/pgalloc.h>"
Most architectures have very similar versions of pXd_alloc_one() and
pXd_free_one() for intermediate levels of page table. These patches add
generic versions of these functions in <asm-generic/pgalloc.h> and enable
use of the generic functions where appropriate.
In addition, functions declared and defined in <asm/pgalloc.h> headers are
used mostly by core mm and early mm initialization in arch and there is no
actual reason to have the <asm/pgalloc.h> included all over the place.
The first patch in this series removes unneeded includes of
<asm/pgalloc.h>
In the end it didn't work out as neatly as I hoped and moving
pXd_alloc_track() definitions to <asm-generic/pgalloc.h> would require
unnecessary changes to arches that have custom page table allocations, so
I've decided to move lib/ioremap.c to mm/ and make pgalloc-track.h local
to mm/.
This patch (of 8):
In most cases <asm/pgalloc.h> header is required only for allocations of
page table memory. Most of the .c files that include that header do not
use symbols declared in <asm/pgalloc.h> and do not require that header.
As for the other header files that used to include <asm/pgalloc.h>, it is
possible to move that include into the .c file that actually uses symbols
from <asm/pgalloc.h> and drop the include from the header file.
The process was somewhat automated using
sed -i -E '/[<"]asm\/pgalloc\.h/d' \
$(grep -L -w -f /tmp/xx \
$(git grep -E -l '[<"]asm/pgalloc\.h'))
where /tmp/xx contains all the symbols defined in
arch/*/include/asm/pgalloc.h.
[rppt@linux.ibm.com: fix powerpc warning]
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200627143453.31835-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a typo in comment, fix it.
Signed-off-by: Ethon Paul <ethp@qq.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200411002955.14545-1-ethp@qq.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No functional change.
[bhe@redhat.com: move functions into CONFIG_MEMORY_HOTPLUG ifdeffery scope]
Link: http://lkml.kernel.org/r/20200316045804.GC3486@MiWiFi-R3L-srv
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20200312124414.439-6-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
And tell check_pfn_span() gating the porper alignment and size of hot
added memory region.
And also move the code comments from inside section_deactivate() to being
above it. The code comments are reasonable for the whole function, and
the moving makes code cleaner.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Link: http://lkml.kernel.org/r/20200312124414.439-5-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, to support subsection aligned memory region adding for pmem,
subsection map is added to track which subsection is present.
However, config ZONE_DEVICE depends on SPARSEMEM_VMEMMAP. It means
subsection map only makes sense when SPARSEMEM_VMEMMAP enabled. For the
classic sparse, it's meaningless. Even worse, it may confuse people when
checking code related to the classic sparse.
About the classic sparse which doesn't support subsection hotplug, Dan
said it's more because the effort and maintenance burden outweighs the
benefit. Besides, the current 64 bit ARCHes all enable
SPARSEMEM_VMEMMAP_ENABLE by default.
Combining the above reasons, no need to provide subsection map and the
relevant handling for the classic sparse. Let's remove them.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Link: http://lkml.kernel.org/r/20200312124414.439-4-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Factor out the code which clear subsection map of one memory region from
section_deactivate() into clear_subsection_map().
And also add helper function is_subsection_map_empty() to check if the
current subsection map is empty or not.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Link: http://lkml.kernel.org/r/20200312124414.439-3-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/hotplug: Only use subsection map for VMEMMAP", v4.
Memory sub-section hotplug was added to fix the issue that nvdimm could be
mapped at non-section aligned starting address. A subsection map is added
into struct mem_section_usage to implement it.
However, config ZONE_DEVICE depends on SPARSEMEM_VMEMMAP. It means
subsection map only makes sense when SPARSEMEM_VMEMMAP enabled. For the
classic sparse, subsection map is meaningless and confusing.
About the classic sparse which doesn't support subsection hotplug, Dan
said it's more because the effort and maintenance burden outweighs the
benefit. Besides, the current 64 bit ARCHes all enable
SPARSEMEM_VMEMMAP_ENABLE by default.
This patch (of 5):
Factor out the code that fills the subsection map from section_activate()
into fill_subsection_map(), this makes section_activate() cleaner and
easier to follow.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200312124414.439-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When allocating memmap for hot added memory with the classic sparse, the
specified 'nid' is ignored in populate_section_memmap().
While in allocating memmap for the classic sparse during boot, the node
given by 'nid' is preferred. And VMEMMAP prefers the node of 'nid' in
both boot stage and memory hot adding. So seems no reason to not respect
the node of 'nid' for the classic sparse when hot adding memory.
Use kvmalloc_node instead to use the passed in 'nid'.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: http://lkml.kernel.org/r/20200316125625.GH3486@MiWiFi-R3L-srv
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This change makes populate_section_memmap()/depopulate_section_memmap
much simpler.
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: http://lkml.kernel.org/r/20200316125450.GG3486@MiWiFi-R3L-srv
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
memmap should be the address to page struct instead of address to pfn.
As mentioned by David, if system memory and devmem sit within a section,
the mismatch address would lead kdump to dump unexpected memory.
Since sub-section only works for SPARSEMEM_VMEMMAP, pfn_to_page() is valid
to get the page struct address at this point.
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Baoquan He <bhe@redhat.com>
Link: http://lkml.kernel.org/r/20200210005048.10437-1-richardw.yang@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix the crash like this:
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000000c3447c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1
...
NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0
LR [c000000000088354] vmemmap_free+0x144/0x320
Call Trace:
section_deactivate+0x220/0x240
__remove_pages+0x118/0x170
arch_remove_memory+0x3c/0x150
memunmap_pages+0x1cc/0x2f0
devm_action_release+0x30/0x50
release_nodes+0x2f8/0x3e0
device_release_driver_internal+0x168/0x270
unbind_store+0x130/0x170
drv_attr_store+0x44/0x60
sysfs_kf_write+0x68/0x80
kernfs_fop_write+0x100/0x290
__vfs_write+0x3c/0x70
vfs_write+0xcc/0x240
ksys_write+0x7c/0x140
system_call+0x5c/0x68
The crash is due to NULL dereference at
test_bit(idx, ms->usage->subsection_map);
due to ms->usage = NULL in pfn_section_valid()
With commit d41e2f3bd546 ("mm/hotplug: fix hot remove failure in
SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after
depopulate_section_mem(). This was done so that pfn_page() can work
correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that
config pfn_to_page does
__section_mem_map_addr(__sec) + __pfn;
where
static inline struct page *__section_mem_map_addr(struct mem_section *section)
{
unsigned long map = section->section_mem_map;
map &= SECTION_MAP_MASK;
return (struct page *)map;
}
Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is
used to check the pfn validity (pfn_valid()). Since section_deactivate
release mem_section->usage if a section is fully deactivated,
pfn_valid() check after a subsection_deactivate cause a kernel crash.
static inline int pfn_valid(unsigned long pfn)
{
...
return early_section(ms) || pfn_section_valid(ms, pfn);
}
where
static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
{
int idx = subsection_map_index(pfn);
return test_bit(idx, ms->usage->subsection_map);
}
Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is
freed. For architectures like ppc64 where large pages are used for
vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple
sections. Hence before a vmemmap mapping page can be freed, the kernel
needs to make sure there are no valid sections within that mapping.
Clearing the section valid bit before depopulate_section_memap enables
this.
[aneesh.kumar@linux.ibm.com: add comment]
Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com
Fixes: d41e2f3bd546 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In section_deactivate(), pfn_to_page() doesn't work any more after
ms->section_mem_map is resetting to NULL in SPARSEMEM|!VMEMMAP case. It
causes a hot remove failure:
kernel BUG at mm/page_alloc.c:4806!
invalid opcode: 0000 [#1] SMP PTI
CPU: 3 PID: 8 Comm: kworker/u16:0 Tainted: G W 5.5.0-next-20200205+ #340
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:free_pages+0x85/0xa0
Call Trace:
__remove_pages+0x99/0xc0
arch_remove_memory+0x23/0x4d
try_remove_memory+0xc8/0x130
__remove_memory+0xa/0x11
acpi_memory_device_remove+0x72/0x100
acpi_bus_trim+0x55/0x90
acpi_device_hotplug+0x2eb/0x3d0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x1a7/0x370
worker_thread+0x30/0x380
kthread+0x112/0x130
ret_from_fork+0x35/0x40
Let's move the ->section_mem_map resetting after
depopulate_section_memmap() to fix it.
[akpm@linux-foundation.org: remove unneeded initialization, per David]
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200307084229.28251-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we use SPARSEMEM instead of SPARSEMEM_VMEMMAP, pfn_to_page()
doesn't work before sparse_init_one_section() is called.
This leads to a crash when hotplug memory:
BUG: unable to handle page fault for address: 0000000006400000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 3 PID: 221 Comm: kworker/u16:1 Tainted: G W 5.5.0-next-20200205+ #343
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:__memset+0x24/0x30
Code: cc cc cc cc cc cc 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 f3
RSP: 0018:ffffb43ac0373c80 EFLAGS: 00010a87
RAX: ffffffffffffffff RBX: ffff8a1518800000 RCX: 0000000000050000
RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000006400000
RBP: 0000000000140000 R08: 0000000000100000 R09: 0000000006400000
R10: 0000000000000000 R11: 0000000000000002 R12: 0000000000000000
R13: 0000000000000028 R14: 0000000000000000 R15: ffff8a153ffd9280
FS: 0000000000000000(0000) GS:ffff8a153ab00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000006400000 CR3: 0000000136fca000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
sparse_add_section+0x1c9/0x26a
__add_pages+0xbf/0x150
add_pages+0x12/0x60
add_memory_resource+0xc8/0x210
__add_memory+0x62/0xb0
acpi_memory_device_add+0x13f/0x300
acpi_bus_attach+0xf6/0x200
acpi_bus_scan+0x43/0x90
acpi_device_hotplug+0x275/0x3d0
acpi_hotplug_work_fn+0x1a/0x30
process_one_work+0x1a7/0x370
worker_thread+0x30/0x380
kthread+0x112/0x130
ret_from_fork+0x35/0x40
We should use memmap as it did.
On x86 the impact is limited to x86_32 builds, or x86_64 configurations
that override the default setting for SPARSEMEM_VMEMMAP.
Other memory hotplug archs (arm64, ia64, and ppc) also default to
SPARSEMEM_VMEMMAP=y.
[dan.j.williams@intel.com: changelog update]
{rppt@linux.ibm.com: changelog update]
Link: http://lkml.kernel.org/r/20200219030454.4844-1-bhe@redhat.com
Fixes: ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug")
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Let's move it to the header and use the shorter variant from
mm/page_alloc.c (the original one will also check
"__highest_present_section_nr + 1", which is not necessary). While at
it, make the section_nr in next_pfn() const.
In next_pfn(), we now return section_nr_to_pfn(-1) instead of -1 once we
exceed __highest_present_section_nr, which doesn't make a difference in
the caller as it is big enough (>= all sane end_pfn).
Link: http://lkml.kernel.org/r/20200113144035.10848-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "Jin, Zhi" <zhi.jin@intel.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After commit ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug"),
when a mem section is fully deactivated, section_mem_map still records
the section's start pfn, which is not used any more and will be
reassigned during re-addition.
In analogy with alloc/free pattern, it is better to clear all fields of
section_mem_map.
Beside this, it breaks the user space tool "makedumpfile" [1], which
makes assumption that a hot-removed section has mem_map as NULL, instead
of checking directly against SECTION_MARKED_PRESENT bit. (makedumpfile
will be better to change the assumption, and need a patch)
The bug can be reproduced on IBM POWERVM by "drmgr -c mem -r -q 5" ,
trigger a crash, and save vmcore by makedumpfile
[1]: makedumpfile, commit e73016540293 ("[v1.6.7] Update version")
Link: http://lkml.kernel.org/r/1579487594-28889-1-git-send-email-kernelfans@gmail.com
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Baoquan He <bhe@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we remove an early section, we don't free the usage map, as the
usage maps of other sections are placed into the same page. Once the
section is removed, it is no longer an early section (especially, the
memmap is freed). When we re-add that section, the usage map is reused,
however, it is no longer an early section. When removing that section
again, we try to kfree() a usage map that was allocated during early
boot - bad.
Let's check against PageReserved() to see if we are dealing with an
usage map that was allocated during boot. We could also check against
!(PageSlab(usage_page) || PageCompound(usage_page)), but PageReserved() is
cleaner.
Can be triggered using memtrace under ppc64/powernv:
$ mount -t debugfs none /sys/kernel/debug/
$ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable
$ echo 0x20000000 > /sys/kernel/debug/powerpc/memtrace/enable
------------[ cut here ]------------
kernel BUG at mm/slub.c:3969!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=3D64K MMU=3DHash SMP NR_CPUS=3D2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 154 Comm: sh Not tainted 5.5.0-rc2-next-20191216-00005-g0be1dba7b7c0 #61
NIP kfree+0x338/0x3b0
LR section_deactivate+0x138/0x200
Call Trace:
section_deactivate+0x138/0x200
__remove_pages+0x114/0x150
arch_remove_memory+0x3c/0x160
try_remove_memory+0x114/0x1a0
__remove_memory+0x20/0x40
memtrace_enable_set+0x254/0x850
simple_attr_write+0x138/0x160
full_proxy_write+0x8c/0x110
__vfs_write+0x38/0x70
vfs_write+0x11c/0x2a0
ksys_write+0x84/0x140
system_call+0x5c/0x68
---[ end trace 4b053cbd84e0db62 ]---
The first invocation will offline+remove memory blocks. The second
invocation will first add+online them again, in order to offline+remove
them again (usually we are lucky and the exact same memory blocks will
get "reallocated").
Tested on powernv with boot memory: The usage map will not get freed.
Tested on x86-64 with DIMMs: The usage map will get freed.
Using Dynamic Memory under a Power DLAPR can trigger it easily.
Triggering removal (I assume after previously removed+re-added) of
memory from the HMC GUI can crash the kernel with the same call trace
and is fixed by this patch.
Link: http://lkml.kernel.org/r/20191217104637.5509-1-david@redhat.com
Fixes: 326e1b8f83a4 ("mm/sparsemem: introduce a SECTION_IS_EARLY flag")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Pingfan Liu <piliu@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sparse_buffer_init() use memblock_alloc_try_nid_raw() to allocate memory
for page management structure, if memory allocation fails from specified
node, it will fall back to allocate from other nodes.
Normally, the page management structure will not exceed 2% of the total
memory, but a large continuous block of allocation is needed. In most
cases, memory allocation from the specified node will succeed, but a
node memory become highly fragmented will fail. we expect to allocate
memory base section rather than by allocating a large block of memory
from other NUMA nodes
Add memblock_alloc_exact_nid_raw() for this situation, which allocate
boot memory block on the exact node. If a large contiguous block memory
allocate fail in sparse_buffer_init(), it will fall back to allocate
small block memory base section.
Link: http://lkml.kernel.org/r/66755ea7-ab10-8882-36fd-3e02b03775d5@huawei.com
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Vincent has noticed [1] that there is something unusual with the memmap
allocations going on on his platform
: I noticed this because on my ARM64 platform, with 1 GiB of memory the
: first [and only] section is allocated from the zeroing path while with
: 2 GiB of memory the first 1 GiB section is allocated from the
: non-zeroing path.
The underlying problem is that although sparse_buffer_init allocates
enough memory for all sections on the node sparse_buffer_alloc is not
able to consume them due to mismatch in the expected allocation
alignement. While sparse_buffer_init preallocation uses the PAGE_SIZE
alignment the real memmap has to be aligned to section_map_size() this
results in a wasted initial chunk of the preallocated memmap and
unnecessary fallback allocation for a section.
While we are at it also change __populate_section_memmap to align to the
requested size because at least VMEMMAP has constrains to have memmap
properly aligned.
[1] http://lkml.kernel.org/r/20191030131122.8256-1-vincent.whitchurch@axis.com
[akpm@linux-foundation.org: tweak layout, per David]
Link: http://lkml.kernel.org/r/20191119092642.31799-1-mhocko@kernel.org
Fixes: 35fd1eb1e821 ("mm/sparse: abstract sparse buffer allocations")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Debugged-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Building the kernel on s390 with -Og produces the following warning:
WARNING: vmlinux.o(.text+0x28dabe): Section mismatch in reference from the function populate_section_memmap() to the function .meminit.text:__populate_section_memmap()
The function populate_section_memmap() references
the function __meminit __populate_section_memmap().
This is often because populate_section_memmap lacks a __meminit
annotation or the annotation of __populate_section_memmap is wrong.
While -Og is not supported, in theory this might still happen with
another compiler or on another architecture. So fix this by using the
correct section annotations.
[iii@linux.ibm.com: v2]
Link: http://lkml.kernel.org/r/20191030151639.41486-1-iii@linux.ibm.com
Link: http://lkml.kernel.org/r/20191028165549.14478-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Oscar Salvador <OSalvador@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sparsemem without VMEMMAP has two allocation paths to allocate the
memory needed for its memmap (done in sparse_mem_map_populate()).
In one allocation path (sparse_buffer_alloc() succeeds), the memory is
not zeroed (since it was previously allocated with
memblock_alloc_try_nid_raw()).
In the other allocation path (sparse_buffer_alloc() fails and
sparse_mem_map_populate() falls back to memblock_alloc_try_nid()), the
memory is zeroed.
AFAICS this difference does not appear to be on purpose. If the code is
supposed to work with non-initialized memory (__init_single_page() takes
care of zeroing the struct pages which are actually used), we should
consistently not zero the memory, to avoid masking bugs.
( I noticed this because on my ARM64 platform, with 1 GiB of memory the
first [and only] section is allocated from the zeroing path while with
2 GiB of memory the first 1 GiB section is allocated from the
non-zeroing path. )
Michal:
"the main user visible problem is a memory wastage. The overal amount
of memory should be small. I wouldn't call it stable material."
Link: http://lkml.kernel.org/r/20191030131122.8256-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We get two warnings when build kernel W=1:
mm/shuffle.c:36:12: warning: no previous prototype for `shuffle_show' [-Wmissing-prototypes]
mm/sparse.c:220:6: warning: no previous prototype for `subsection_mask_set' [-Wmissing-prototypes]
Make the functions static to fix this.
Link: http://lkml.kernel.org/r/1566978161-7293-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no possibility for memmap to be NULL in the current codebase.
This check was added in commit 95a4774d055c ("memory-hotplug: update
mce_bad_pages when removing the memory") where memmap was originally
inited to NULL, and only conditionally given a value.
The code that could have passed a NULL has been removed by commit
ba72b4c8cf60 ("mm/sparsemem: support sub-section hotplug"), so there is no
longer a possibility that memmap can be NULL.
Link: http://lkml.kernel.org/r/20190829035151.20975-1-alastair@d-silva.org
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use the function written to do it instead.
Link: http://lkml.kernel.org/r/20190827053656.32191-2-alastair@au1.ibm.com
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__pfn_to_section is defined as __nr_to_section(pfn_to_section_nr(pfn)).
Since we already get section_nr, it is not necessary to get mem_section
from start_pfn. By doing so, we reduce one redundant operation.
Link: http://lkml.kernel.org/r/20190809010242.29797-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The size argument passed into sparse_buffer_alloc() has already been
aligned with PAGE_SIZE or PMD_SIZE.
If the size after aligned is not power of 2 (e.g. 0x480000), the
PTR_ALIGN() will return wrong value. Use roundup to round sparsemap_buf
up to next multiple of size.
Link: http://lkml.kernel.org/r/20190705114826.28586-1-lecopzer.chen@mediatek.com
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Mark-PK Tsai <Mark-PK.Tsai@mediatek.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
sparse_buffer_alloc(xsize) gets the size of memory from sparsemap_buf
after being aligned with the size. However, the size is at least
PAGE_ALIGN(sizeof(struct page) * PAGES_PER_SECTION) and usually larger
than PAGE_SIZE.
Also, sparse_buffer_fini() only frees memory between sparsemap_buf and
sparsemap_buf_end, since sparsemap_buf may be changed by PTR_ALIGN()
first, the aligned space before sparsemap_buf is wasted and no one will
touch it.
In our ARM32 platform (without SPARSEMEM_VMEMMAP)
Sparse_buffer_init
Reserve d359c000 - d3e9c000 (9M)
Sparse_buffer_alloc
Alloc d3a00000 - d3E80000 (4.5M)
Sparse_buffer_fini
Free d3e80000 - d3e9c000 (~=100k)
The reserved memory between d359c000 - d3a00000 (~=4.4M) is unfreed.
In ARM64 platform (with SPARSEMEM_VMEMMAP)
sparse_buffer_init
Reserve ffffffc07d623000 - ffffffc07f623000 (32M)
Sparse_buffer_alloc
Alloc ffffffc07d800000 - ffffffc07f600000 (30M)
Sparse_buffer_fini
Free ffffffc07f600000 - ffffffc07f623000 (140K)
The reserved memory between ffffffc07d623000 - ffffffc07d800000
(~=1.9M) is unfreed.
Let's explicit free redundant aligned memory.
[arnd@arndb.de: mark sparse_buffer_free as __meminit]
Link: http://lkml.kernel.org/r/20190709185528.3251709-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20190705114730.28534-1-lecopzer.chen@mediatek.com
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Signed-off-by: Mark-PK Tsai <Mark-PK.Tsai@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
David points out that there is a mixture of 'int' and 'unsigned long'
usage for section number data types. Update the memory hotplug path to
use 'unsigned long' consistently for section numbers.
[akpm@linux-foundation.org: fix printk format]
Link: http://lkml.kernel.org/r/156107543656.1329419.11505835211949439815.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
