summaryrefslogtreecommitdiffstats
path: root/mm/shmem.c
AgeCommit message (Collapse)AuthorFilesLines
2019-05-14mm: page cache: store only head pages in i_pagesMatthew Wilcox1-1/+1
Transparent Huge Pages are currently stored in i_pages as pointers to consecutive subpages. This patch changes that to storing consecutive pointers to the head page in preparation for storing huge pages more efficiently in i_pages. Large parts of this are "inspired" by Kirill's patch https://lore.kernel.org/lkml/20170126115819.58875-2-kirill.shutemov@linux.intel.com/ [willy@infradead.org: fix swapcache pages] Link: http://lkml.kernel.org/r/20190324155441.GF10344@bombadil.infradead.org [kirill@shutemov.name: hugetlb stores pages in page cache differently] Link: http://lkml.kernel.org/r/20190404134553.vuvhgmghlkiw2hgl@kshutemo-mobl1 Link: http://lkml.kernel.org/r/20190307153051.18815-1-willy@infradead.org Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Kirill Shutemov <kirill@shutemov.name> Reviewed-and-tested-by: Song Liu <songliubraving@fb.com> Tested-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Tested-by: Qian Cai <cai@lca.pw> Cc: Hugh Dickins <hughd@google.com> Cc: Song Liu <liu.song.a23@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-01shmem: make use of ->free_inode()Al Viro1-3/+2
same situation as for hugetlbfs Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-19mm: swapoff: shmem_unuse() stop eviction without igrab()Hugh Dickins1-22/+18
The igrab() in shmem_unuse() looks good, but we forgot that it gives no protection against concurrent unmounting: a point made by Konstantin Khlebnikov eight years ago, and then fixed in 2.6.39 by 778dd893ae78 ("tmpfs: fix race between umount and swapoff"). The current 5.1-rc swapoff is liable to hit "VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day..." followed by GPF. Once again, give up on using igrab(); but don't go back to making such heavy-handed use of shmem_swaplist_mutex as last time: that would spoil the new design, and I expect could deadlock inside shmem_swapin_page(). Instead, shmem_unuse() just raise a "stop_eviction" count in the shmem- specific inode, and shmem_evict_inode() wait for that to go down to 0. Call it "stop_eviction" rather than "swapoff_busy" because it can be put to use for others later (huge tmpfs patches expect to use it). That simplifies shmem_unuse(), protecting it from both unlink and unmount; and in practice lets it locate all the swap in its first try. But do not rely on that: there's still a theoretical case, when shmem_writepage() might have been preempted after its get_swap_page(), before making the swap entry visible to swapoff. [hughd@google.com: remove incorrect list_del()] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904091133570.1898@eggly.anvils Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081259400.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Huang Ying <ying.huang@intel.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Rik van Riel <riel@surriel.com> Cc: Vineeth Pillai <vpillai@digitalocean.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-19mm: swapoff: shmem_find_swap_entries() filter out other typesHugh Dickins1-9/+9
Swapfile "type" was passed all the way down to shmem_unuse_inode(), but then forgotten from shmem_find_swap_entries(): with the result that removing one swapfile would try to free up all the swap from shmem - no problem when only one swapfile anyway, but counter-productive when more, causing swapoff to be unnecessarily OOM-killed when it should succeed. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1904081254470.1523@eggly.anvils Fixes: b56a2d8af914 ("mm: rid swapoff of quadratic complexity") Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: "Alex Xu (Hello71)" <alex_y_xu@yahoo.ca> Cc: Vineeth Pillai <vpillai@digitalocean.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Rik van Riel <riel@surriel.com> Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05mm/memfd: add an F_SEAL_FUTURE_WRITE seal to memfdJoel Fernandes (Google)1-3/+22
Android uses ashmem for sharing memory regions. We are looking forward to migrating all usecases of ashmem to memfd so that we can possibly remove the ashmem driver in the future from staging while also benefiting from using memfd and contributing to it. Note staging drivers are also not ABI and generally can be removed at anytime. One of the main usecases Android has is the ability to create a region and mmap it as writeable, then add protection against making any "future" writes while keeping the existing already mmap'ed writeable-region active. This allows us to implement a usecase where receivers of the shared memory buffer can get a read-only view, while the sender continues to write to the buffer. See CursorWindow documentation in Android for more details: https://developer.android.com/reference/android/database/CursorWindow This usecase cannot be implemented with the existing F_SEAL_WRITE seal. To support the usecase, this patch adds a new F_SEAL_FUTURE_WRITE seal which prevents any future mmap and write syscalls from succeeding while keeping the existing mmap active. A better way to do F_SEAL_FUTURE_WRITE seal was discussed [1] last week where we don't need to modify core VFS structures to get the same behavior of the seal. This solves several side-effects pointed by Andy. self-tests are provided in later patch to verify the expected semantics. [1] https://lore.kernel.org/lkml/20181111173650.GA256781@google.com/ Thanks a lot to Andy for suggestions to improve code. Link: http://lkml.kernel.org/r/20190112203816.85534-2-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Acked-by: John Stultz <john.stultz@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Marc-Andr Lureau <marcandre.lureau@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05mm: rid swapoff of quadratic complexityVineeth Remanan Pillai1-120/+147
This patch was initially posted by Kelley Nielsen. Reposting the patch with all review comments addressed and with minor modifications and optimizations. Also, folding in the fixes offered by Hugh Dickins and Huang Ying. Tests were rerun and commit message updated with new results. try_to_unuse() is of quadratic complexity, with a lot of wasted effort. It unuses swap entries one by one, potentially iterating over all the page tables for all the processes in the system for each one. This new proposed implementation of try_to_unuse simplifies its complexity to linear. It iterates over the system's mms once, unusing all the affected entries as it walks each set of page tables. It also makes similar changes to shmem_unuse. Improvement swapoff was called on a swap partition containing about 6G of data, in a VM(8cpu, 16G RAM), and calls to unuse_pte_range() were counted. Present implementation....about 1200M calls(8min, avg 80% cpu util). Prototype.................about 9.0K calls(3min, avg 5% cpu util). Details In shmem_unuse(), iterate over the shmem_swaplist and, for each shmem_inode_info that contains a swap entry, pass it to shmem_unuse_inode(), along with the swap type. In shmem_unuse_inode(), iterate over its associated xarray, and store the index and value of each swap entry in an array for passing to shmem_swapin_page() outside of the RCU critical section. In try_to_unuse(), instead of iterating over the entries in the type and unusing them one by one, perhaps walking all the page tables for all the processes for each one, iterate over the mmlist, making one pass. Pass each mm to unuse_mm() to begin its page table walk, and during the walk, unuse all the ptes that have backing store in the swap type received by try_to_unuse(). After the walk, check the type for orphaned swap entries with find_next_to_unuse(), and remove them from the swap cache. If find_next_to_unuse() starts over at the beginning of the type, repeat the check of the shmem_swaplist and the walk a maximum of three times. Change unuse_mm() and the intervening walk functions down to unuse_pte_range() to take the type as a parameter, and to iterate over their entire range, calling the next function down on every iteration. In unuse_pte_range(), make a swap entry from each pte in the range using the passed in type. If it has backing store in the type, call swapin_readahead() to retrieve the page and pass it to unuse_pte(). Pass the count of pages_to_unuse down the page table walks in try_to_unuse(), and return from the walk when the desired number of pages has been swapped back in. Link: http://lkml.kernel.org/r/20190114153129.4852-2-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Signed-off-by: Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05mm: refactor swap-in logic out of shmem_getpage_gfpVineeth Remanan Pillai1-205/+244
swapin logic can be reused independently without rest of the logic in shmem_getpage_gfp. So lets refactor it out as an independent function. Link: http://lkml.kernel.org/r/20190114153129.4852-1-vpillai@digitalocean.com Signed-off-by: Vineeth Remanan Pillai <vpillai@digitalocean.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Huang Ying <ying.huang@intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Kelley Nielsen <kelleynnn@gmail.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25tmpfs: fix uninitialized return value in shmem_linkDarrick J. Wong1-1/+1
When we made the shmem_reserve_inode call in shmem_link conditional, we forgot to update the declaration for ret so that it always has a known value. Dan Carpenter pointed out this deficiency in the original patch. Fixes: 1062af920c07 ("tmpfs: fix link accounting when a tmpfile is linked in") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Matej Kupljen <matej.kupljen@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-21tmpfs: fix link accounting when a tmpfile is linked inDarrick J. Wong1-3/+7
tmpfs has a peculiarity of accounting hard links as if they were separate inodes: so that when the number of inodes is limited, as it is by default, a user cannot soak up an unlimited amount of unreclaimable dcache memory just by repeatedly linking a file. But when v3.11 added O_TMPFILE, and the ability to use linkat() on the fd, we missed accommodating this new case in tmpfs: "df -i" shows that an extra "inode" remains accounted after the file is unlinked and the fd closed and the actual inode evicted. If a user repeatedly links tmpfiles into a tmpfs, the limit will be hit (ENOSPC) even after they are deleted. Just skip the extra reservation from shmem_link() in this case: there's a sense in which this first link of a tmpfile is then cheaper than a hard link of another file, but the accounting works out, and there's still good limiting, so no need to do anything more complicated. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1902182134370.7035@eggly.anvils Fixes: f4e0c30c191 ("allow the temp files created by open() to be linked to") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Matej Kupljen <matej.kupljen@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm: convert totalram_pages and totalhigh_pages variables to atomicArun KS1-4/+5
totalram_pages and totalhigh_pages are made static inline function. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes better to remove the lock and convert variables to atomic, with preventing poteintial store-to-read tearing as a bonus. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Suggested-by: Michal Hocko <mhocko@suse.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm: reference totalram_pages and managed_pages once per functionArun KS1-1/+2
Patch series "mm: convert totalram_pages, totalhigh_pages and managed pages to atomic", v5. This series converts totalram_pages, totalhigh_pages and zone->managed_pages to atomic variables. totalram_pages, zone->managed_pages and totalhigh_pages updates are protected by managed_page_count_lock, but readers never care about it. Convert these variables to atomic to avoid readers potentially seeing a store tear. Main motivation was that managed_page_count_lock handling was complicating things. It was discussed in length here, https://lore.kernel.org/patchwork/patch/995739/#1181785 It seemes better to remove the lock and convert variables to atomic. With the change, preventing poteintial store-to-read tearing comes as a bonus. This patch (of 4): This is in preparation to a later patch which converts totalram_pages and zone->managed_pages to atomic variables. Please note that re-reading the value might lead to a different value and as such it could lead to unexpected behavior. There are no known bugs as a result of the current code but it is better to prevent from them in principle. Link: http://lkml.kernel.org/r/1542090790-21750-2-git-send-email-arunks@codeaurora.org Signed-off-by: Arun KS <arunks@codeaurora.org> Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-13Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-3/+1
Pull XArray fixes from Matthew Wilcox: "Two bugfixes, each with test-suite updates, two improvements to the test-suite without associated bugs, and one patch adding a missing API" * tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_alloc when id exceeds max XArray tests: Check iterating over multiorder entries XArray tests: Handle larger indices more elegantly XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh radix tree: Don't return retry entries from lookup
2018-12-08Revert "mm, thp: consolidate THP gfp handling into ↵David Rientjes1-1/+1
alloc_hugepage_direct_gfpmask" This reverts commit 89c83fb539f95491be80cdd5158e6f0ce329e317. This should have been done as part of 2f0799a0ffc0 ("mm, thp: restore node-local hugepage allocations"). The movement of the thp allocation policy from alloc_pages_vma() to alloc_hugepage_direct_gfpmask() was intended to only set __GFP_THISNODE for mempolicies that are not MPOL_BIND whereas the revert could set this regardless of mempolicy. While the check for MPOL_BIND between alloc_hugepage_direct_gfpmask() and alloc_pages_vma() was racy, that has since been removed since the revert. What is left is the possibility to use __GFP_THISNODE in policy_node() when it is unexpected because the special handling for hugepages in alloc_pages_vma() was removed as part of the consolidation. Secondly, prior to 89c83fb539f9, alloc_pages_vma() implemented a somewhat different policy for hugepage allocations, which were allocated through alloc_hugepage_vma(). For hugepage allocations, if the allocating process's node is in the set of allowed nodes, allocate with __GFP_THISNODE for that node (for MPOL_PREFERRED, use that node with __GFP_THISNODE instead). This was changed for shmem_alloc_hugepage() to allow fallback to other nodes in 89c83fb539f9 as it did for new_page() in mm/mempolicy.c which is functionally different behavior and removes the requirement to only allocate hugepages locally. So this commit does a full revert of 89c83fb539f9 instead of the partial revert that was done in 2f0799a0ffc0. The result is the same thp allocation policy for 4.20 that was in 4.19. Fixes: 89c83fb539f9 ("mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask") Fixes: 2f0799a0ffc0 ("mm, thp: restore node-local hugepage allocations") Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-06XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bhMatthew Wilcox1-3/+1
These convenience wrappers match the other _irq and _bh wrappers we already have. It turns out I'd already open-coded xa_cmpxchg_irq() in the shmem code, so convert that. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-11-30mm/khugepaged: fix crashes due to misaccounted holesHugh Dickins1-1/+5
Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later closed and unlinked. khugepaged's collapse_shmem() was forgetting to update mapping->nrpages on the rollback path, after it had added but then needs to undo some holes. There is indeed an irritating asymmetry between shmem_charge(), whose callers want it to increment nrpages after successfully accounting blocks, and shmem_uncharge(), when __delete_from_page_cache() already decremented nrpages itself: oh well, just add a comment on that to them both. And shmem_recalc_inode() is supposed to be called when the accounting is expected to be in balance (so it can deduce from imbalance that reclaim discarded some pages): so change shmem_charge() to update nrpages earlier (though it's rare for the difference to matter at all). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: 800d8c63b2e98 ("shmem: add huge pages support") Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not setAndrea Arcangeli1-0/+11
Set the page dirty if VM_WRITE is not set because in such case the pte won't be marked dirty and the page would be reclaimed without writepage (i.e. swapout in the shmem case). This was found by source review. Most apps (certainly including QEMU) only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't modify the memory in the first place. This is for correctness and it could help the non cooperative use case to avoid unexpected data loss. Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com Reviewed-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: shmem: add i_size checksAndrea Arcangeli1-2/+16
With MAP_SHARED: recheck the i_size after taking the PT lock, to serialize against truncate with the PT lock. Delete the page from the pagecache if the i_size_read check fails. With MAP_PRIVATE: check the i_size after the PT lock before mapping anonymous memory or zeropages into the MAP_PRIVATE shmem mapping. A mostly irrelevant cleanup: like we do the delete_from_page_cache() pagecache removal after dropping the PT lock, the PT lock is a spinlock so drop it before the sleepable page lock. Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30userfaultfd: use ENOENT instead of EFAULT if the atomic copy user failsAndrea Arcangeli1-1/+1
Patch series "userfaultfd shmem updates". Jann found two bugs in the userfaultfd shmem MAP_SHARED backend: the lack of the VM_MAYWRITE check and the lack of i_size checks. Then looking into the above we also fixed the MAP_PRIVATE case. Hugh by source review also found a data loss source if UFFDIO_COPY is used on shmem MAP_SHARED PROT_READ mappings (the production usages incidentally run with PROT_READ|PROT_WRITE, so the data loss couldn't happen in those production usages like with QEMU). The whole patchset is marked for stable. We verified QEMU postcopy live migration with guest running on shmem MAP_PRIVATE run as well as before after the fix of shmem MAP_PRIVATE. Regardless if it's shmem or hugetlbfs or MAP_PRIVATE or MAP_SHARED, QEMU unconditionally invokes a punch hole if the guest mapping is filebacked and a MADV_DONTNEED too (needed to get rid of the MAP_PRIVATE COWs and for the anon backend). This patch (of 5): We internally used EFAULT to communicate with the caller, switch to ENOENT, so EFAULT can be used as a non internal retval. Link: http://lkml.kernel.org/r/20181126173452.26955-2-aarcange@redhat.com Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: <stable@vger.kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm: use swp_offset as key in shmem_replace_page()Yu Zhao1-2/+4
We changed the key of swap cache tree from swp_entry_t.val to swp_offset. We need to do so in shmem_replace_page() as well. Hugh said: "shmem_replace_page() has been wrong since the day I wrote it: good enough to work on swap "type" 0, which is all most people ever use (especially those few who need shmem_replace_page() at all), but broken once there are any non-0 swp_type bits set in the higher order bits" Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com Fixes: f6ab1f7f6b2d ("mm, swap: use offset of swap entry as key of swap cache") Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-20Merge drm/drm-next into drm-intel-next-queuedJani Nikula1-124/+75
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-18tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offsetYufen Yu1-3/+1
Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com Signed-off-by: Yufen Yu <yuyufen@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-07mm, drm/i915: mark pinned shmemfs pages as unevictableKuo-Hsin Yang1-1/+1
The i915 driver uses shmemfs to allocate backing storage for gem objects. These shmemfs pages can be pinned (increased ref count) by shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan wastes a lot of time scanning these pinned pages. In some extreme case, all pages in the inactive anon lru are pinned, and only the inactive anon lru is scanned due to inactive_ratio, the system cannot swap and invokes the oom-killer. Mark these pinned pages as unevictable to speed up vmscan. Export pagevec API check_move_unevictable_pages(). This patch was inspired by Chris Wilson's change [1]. [1]: https://patchwork.kernel.org/patch/9768741/ Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org> Acked-by: Michal Hocko <mhocko@suse.com> # mm part Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-11-03mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmaskMichal Hocko1-1/+1
THP allocation mode is quite complex and it depends on the defrag mode. This complexity is hidden in alloc_hugepage_direct_gfpmask from a large part currently. The NUMA special casing (namely __GFP_THISNODE) is however independent and placed in alloc_pages_vma currently. This both adds an unnecessary branch to all vma based page allocation requests and it makes the code more complex unnecessarily as well. Not to mention that e.g. shmem THP used to do the node reclaiming unconditionally regardless of the defrag mode until recently. This was not only unexpected behavior but it was also hardly a good default behavior and I strongly suspect it was just a side effect of the code sharing more than a deliberate decision which suggests that such a layering is wrong. Get rid of the thp special casing from alloc_pages_vma and move the logic to alloc_hugepage_direct_gfpmask. __GFP_THISNODE is applied to the resulting gfp mask only when the direct reclaim is not requested and when there is no explicit numa binding to preserve the current logic. Please note that there's also a slight difference wrt MPOL_BIND now. The previous code would avoid using __GFP_THISNODE if the local node was outside of policy_nodemask(). After this patch __GFP_THISNODE is avoided for all MPOL_BIND policies. So there's a difference that if local node is actually allowed by the bind policy's nodemask, previously __GFP_THISNODE would be added, but now it won't be. From the behavior POV this is still correct because the policy nodemask is used. Link: http://lkml.kernel.org/r/20180925120326.24392-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-21shmem: Comment fixupsMatthew Wilcox1-6/+6
Remove the last mentions of radix tree from various comments. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert shmem_partial_swap_usage to XArrayMatthew Wilcox1-14/+4
Simpler code because the xarray takes care of things like the limit and dereferencing the slot. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert shmem_free_swap to XArrayMatthew Wilcox1-2/+2
Since we are conditionally storing NULL in the XArray, we do not need to allocate memory and the GFP flags will be unused. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert shmem_alloc_hugepage to XArrayMatthew Wilcox1-10/+4
xa_find() is a slightly easier API to use than radix_tree_gang_lookup_slot() because it contains its own RCU locking. This commit removes the last user of radix_tree_gang_lookup_slot() so remove the function too. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert shmem_add_to_page_cache to XArrayMatthew Wilcox1-47/+34
We can use xas_find_conflict() instead of radix_tree_gang_lookup_slot() to find any conflicting entry and combine the three paths through this function into one. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert find_swap_entry to XArrayMatthew Wilcox1-17/+10
This is a 1:1 conversion. The major part of this patch is converting the test framework from userspace to kernel space and mirroring the algorithm now used in find_swap_entry(). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert shmem_confirm_swap to XArrayMatthew Wilcox1-6/+1
xa_load has its own RCU locking, so we can eliminate it here. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-10-21shmem: Convert shmem_radix_tree_replace to XArrayMatthew Wilcox1-14/+8
Rename shmem_radix_tree_replace() to shmem_replace_entry() and convert it to use the XArray API. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2018-09-29xarray: Replace exceptional entriesMatthew Wilcox1-5/+5
Introduce xarray value entries and tagged pointers to replace radix tree exceptional entries. This is a slight change in encoding to allow the use of an extra bit (we can now store BITS_PER_LONG - 1 bits in a value entry). It is also a change in emphasis; exceptional entries are intimidating and different. As the comment explains, you can choose to store values or pointers in the xarray and they are both first-class citizens. Signed-off-by: Matthew Wilcox <willy@infradead.org> Reviewed-by: Josef Bacik <jbacik@fb.com>
2018-09-20mm: shmem.c: Correctly annotate new inodes for lockdepJoel Fernandes (Google)1-0/+2
Directories and inodes don't necessarily need to be in the same lockdep class. For ex, hugetlbfs splits them out too to prevent false positives in lockdep. Annotate correctly after new inode creation. If its a directory inode, it will be put into a different class. This should fix a lockdep splat reported by syzbot: > ====================================================== > WARNING: possible circular locking dependency detected > 4.18.0-rc8-next-20180810+ #36 Not tainted > ------------------------------------------------------ > syz-executor900/4483 is trying to acquire lock: > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: inode_lock > include/linux/fs.h:765 [inline] > 00000000d2bfc8fe (&sb->s_type->i_mutex_key#9){++++}, at: > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > > but task is already holding lock: > 0000000025208078 (ashmem_mutex){+.+.}, at: ashmem_shrink_scan+0xb4/0x630 > drivers/staging/android/ashmem.c:448 > > which lock already depends on the new lock. > > -> #2 (ashmem_mutex){+.+.}: > __mutex_lock_common kernel/locking/mutex.c:925 [inline] > __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 > mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 > ashmem_mmap+0x55/0x520 drivers/staging/android/ashmem.c:361 > call_mmap include/linux/fs.h:1844 [inline] > mmap_region+0xf27/0x1c50 mm/mmap.c:1762 > do_mmap+0xa10/0x1220 mm/mmap.c:1535 > do_mmap_pgoff include/linux/mm.h:2298 [inline] > vm_mmap_pgoff+0x213/0x2c0 mm/util.c:357 > ksys_mmap_pgoff+0x4da/0x660 mm/mmap.c:1585 > __do_sys_mmap arch/x86/kernel/sys_x86_64.c:100 [inline] > __se_sys_mmap arch/x86/kernel/sys_x86_64.c:91 [inline] > __x64_sys_mmap+0xe9/0x1b0 arch/x86/kernel/sys_x86_64.c:91 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #1 (&mm->mmap_sem){++++}: > __might_fault+0x155/0x1e0 mm/memory.c:4568 > _copy_to_user+0x30/0x110 lib/usercopy.c:25 > copy_to_user include/linux/uaccess.h:155 [inline] > filldir+0x1ea/0x3a0 fs/readdir.c:196 > dir_emit_dot include/linux/fs.h:3464 [inline] > dir_emit_dots include/linux/fs.h:3475 [inline] > dcache_readdir+0x13a/0x620 fs/libfs.c:193 > iterate_dir+0x48b/0x5d0 fs/readdir.c:51 > __do_sys_getdents fs/readdir.c:231 [inline] > __se_sys_getdents fs/readdir.c:212 [inline] > __x64_sys_getdents+0x29f/0x510 fs/readdir.c:212 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > -> #0 (&sb->s_type->i_mutex_key#9){++++}: > lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 > down_write+0x8f/0x130 kernel/locking/rwsem.c:70 > inode_lock include/linux/fs.h:765 [inline] > shmem_fallocate+0x18b/0x12e0 mm/shmem.c:2602 > ashmem_shrink_scan+0x236/0x630 drivers/staging/android/ashmem.c:455 > ashmem_ioctl+0x3ae/0x13a0 drivers/staging/android/ashmem.c:797 > vfs_ioctl fs/ioctl.c:46 [inline] > file_ioctl fs/ioctl.c:501 [inline] > do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:685 > ksys_ioctl+0xa9/0xd0 fs/ioctl.c:702 > __do_sys_ioctl fs/ioctl.c:709 [inline] > __se_sys_ioctl fs/ioctl.c:707 [inline] > __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:707 > do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 > entry_SYSCALL_64_after_hwframe+0x49/0xbe > > other info that might help us debug this: > > Chain exists of: > &sb->s_type->i_mutex_key#9 --> &mm->mmap_sem --> ashmem_mutex > > Possible unsafe locking scenario: > > CPU0 CPU1 > ---- ---- > lock(ashmem_mutex); > lock(&mm->mmap_sem); > lock(ashmem_mutex); > lock(&sb->s_type->i_mutex_key#9); > > *** DEADLOCK *** > > 1 lock held by syz-executor900/4483: > #0: 0000000025208078 (ashmem_mutex){+.+.}, at: > ashmem_shrink_scan+0xb4/0x630 drivers/staging/android/ashmem.c:448 Link: http://lkml.kernel.org/r/20180821231835.166639-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: NeilBrown <neilb@suse.com> Suggested-by: NeilBrown <neilb@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-23mm: Change return type int to vm_fault_t for fault handlersSouptick Joarder1-2/+3
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") The aim is to change the return type of finish_fault() and handle_mm_fault() to vm_fault_t type. As part of that clean up return type of all other recursively called functions have been changed to vm_fault_t type. The places from where handle_mm_fault() is getting invoked will be change to vm_fault_t type but in a separate patch. vmf_error() is the newly introduce inline function in 4.17-rc6. [akpm@linux-foundation.org: don't shadow outer local `ret' in __do_huge_pmd_anonymous_page()] Link: http://lkml.kernel.org/r/20180604171727.GA20279@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22mm: zero out the vma in vma_init()Andrew Morton1-1/+0
Rather than in vm_area_alloc(). To ensure that the various oddball stack-based vmas are in a good state. Some of the callers were zeroing them out, others were not. Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17shmem: use monotonic time for i_generationArnd Bergmann1-1/+2
get_seconds() is deprecated because it will lead to a 32-bit overflow in 2038 or 2106. We don't need the i_generation to be strictly monotonic anyway, and other file systems like ext4 and xfs just use prandom_u32(), so let's use the same one here. If this is considered too slow, we could also use ktime_get_seconds() or ktime_get_real_seconds() to keep the previous behavior. Both of these return a time64_t and are not deprecated, but only return a unique value once per second, and are predictable. Link: http://lkml.kernel.org/r/20180620082556.581543-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-14Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+5
Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...
2018-08-13Merge branch 'work.open3' of ↵Linus Torvalds1-38/+11
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs open-related updates from Al Viro: - "do we need fput() or put_filp()" rules are gone - it's always fput() now. We keep track of that state where it belongs - in ->f_mode. - int *opened mess killed - in finish_open(), in ->atomic_open() instances and in fs/namei.c code around do_last()/lookup_open()/atomic_open(). - alloc_file() wrappers with saner calling conventions are introduced (alloc_file_clone() and alloc_file_pseudo()); callers converted, with much simplification. - while we are at it, saner calling conventions for path_init() and link_path_walk(), simplifying things inside fs/namei.c (both on open-related paths and elsewhere). * 'work.open3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits) few more cleanups of link_path_walk() callers allow link_path_walk() to take ERR_PTR() make path_init() unconditionally paired with terminate_walk() document alloc_file() changes make alloc_file() static do_shmat(): grab shp->shm_file earlier, switch to alloc_file_clone() new helper: alloc_file_clone() create_pipe_files(): switch the first allocation to alloc_file_pseudo() anon_inode_getfile(): switch to alloc_file_pseudo() hugetlb_file_setup(): switch to alloc_file_pseudo() ocxlflash_getfile(): switch to alloc_file_pseudo() cxl_getfile(): switch to alloc_file_pseudo() ... and switch shmem_file_setup() to alloc_file_pseudo() __shmem_file_setup(): reorder allocations new wrapper: alloc_file_pseudo() kill FILE_{CREATED,OPENED} switch atomic_open() and lookup_open() to returning 0 in all success cases document ->atomic_open() changes ->atomic_open(): return 0 in all success cases get rid of 'opened' in path_openat() and the helpers downstream ...
2018-07-26mm: use vma_init() to initialize VMAs on stack and data segmentsKirill A. Shutemov1-0/+1
Make sure to initialize all VMAs properly, not only those which come from vm_area_cachep. Link: http://lkml.kernel.org/r/20180724121139.62570-3-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-12... and switch shmem_file_setup() to alloc_file_pseudo()Al Viro1-30/+7
Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12__shmem_file_setup(): reorder allocationsAl Viro1-23/+20
grab inode and reserve memory first. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-12alloc_file(): switch to passing O_... flags instead of FMODE_... modeAl Viro1-2/+1
... so that it could set both ->f_flags and ->f_mode, without callers having to set ->f_flags manually. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-07-09memcontrol: schedule throttling if we are congestedTejun Heo1-5/+5
Memory allocations can induce swapping via kswapd or direct reclaim. If we are having IO done for us by kswapd and don't actually go into direct reclaim we may never get scheduled for throttling. So instead check to see if our cgroup is congested, and if so schedule the throttling. Before we return to user space the throttling stuff will only throttle if we actually required it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Josef Bacik <jbacik@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-15mm: use octal not symbolic permissionsJoe Perches1-4/+5
mm/*.c files use symbolic and octal styles for permissions. Using octal and not symbolic permissions is preferred by many as more readable. https://lkml.org/lkml/2016/8/2/1945 Prefer the direct use of octal for permissions. Done using $ scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace mm/*.c and some typing. Before: $ git grep -P -w "0[0-7]{3,3}" mm | wc -l 44 After: $ git grep -P -w "0[0-7]{3,3}" mm | wc -l 86 Miscellanea: o Whitespace neatening around these conversions. Link: http://lkml.kernel.org/r/2e032ef111eebcd4c5952bae86763b541d373469.1522102887.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07mm/shmem.c: zero out unused vma fields in shmem_pseudo_vma_init()Kirill A. Shutemov1-2/+1
shmem/tmpfs uses pseudo vma to allocate page with correct NUMA policy. The pseudo vma doesn't have vm_page_prot set. We are going to encode encryption KeyID in vm_page_prot. Having garbage there causes problems. Zero out all unused fields in the pseudo vma. Link: http://lkml.kernel.org/r/20180531135602.20321-1-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07mm/shmem.c: use new return type vm_fault_tSouptick Joarder1-6/+6
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. See commit 1c8f422059ae ("mm: change return type to vm_fault_t") vmf_error() is the newly introduce inline function in 4.17-rc6. Link: http://lkml.kernel.org/r/20180521202410.GA17912@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07tmpfs: allow decoding a file handle of an unlinked fileAmir Goldstein1-1/+10
tmpfs uses the helper d_find_alias() to find a dentry from a decoded inode, but d_find_alias() skips unhashed dentries, so unlinked files cannot be decoded from a file handle. This can be reproduced using xfstests test program open_by_handle: $ open_by handle -c /tmp/testdir $ open_by_handle -dk /tmp/testdir open_by_handle(/tmp/testdir/file000000) returned 116 incorrectly on an unlinked open file! To fix this, if d_find_alias() can't find a hashed alias, call d_find_any_alias() to return an unhashed one. Link: http://lkml.kernel.org/r/CAOQ4uxg+qSLP0KwdW+h1tcPqOCQd+_pGZVXiePQB1TXCMBMctQ@mail.gmail.com Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: NeilBrown <neilb@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jeff Layton <jlayton@poochiereds.net> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07mm: shmem: make stat.st_blksize return huge page size if THP is onYang Shi1-0/+14
Since tmpfs THP was supported in 4.8, hugetlbfs is not the only filesystem with huge page support anymore. tmpfs can use huge page via THP when mounting by "huge=" mount option. When applications use huge page on hugetlbfs, it just need check the filesystem magic number, but it is not enough for tmpfs. Make stat.st_blksize return huge page size if it is mounted by appropriate "huge=" option to give applications a hint to optimize the behavior with THP. Some applications may not do wisely with THP. For example, QEMU may mmap file on non huge page aligned hint address with MAP_FIXED, which results in no pages are PMD mapped even though THP is used. Some applications may mmap file with non huge page aligned offset. Both behaviors make THP pointless. statfs.f_bsize still returns 4KB for tmpfs since THP could be split, and it also may fallback to 4KB page silently if there is not enough huge page. Furthermore, different f_bsize makes max_blocks and free_blocks calculation harder but without too much benefit. Returning huge page size via stat.st_blksize sounds good enough. Since PUD size huge page for THP has not been supported, now it just returns HPAGE_PMD_SIZE. Hugh said: : Sorry, I have no enthusiasm for this patch; but do I feel strongly : enough to override you and everyone else to NAK it? No, I don't feel : that strongly, maybe st_blksize isn't worth arguing over. : : We did look at struct stat when designing huge tmpfs, to see if there : were any fields that should be adjusted for it; but concluded none. : Yes, it would sometimes be nice to have a quickly accessible indicator : for when tmpfs has been mounted huge (scanning /proc/mounts for options : can be tiresome, agreed); but since tmpfs tries to supply huge (or not) : pages transparently, no difference seemed right. : : So, because st_blksize is a not very useful field of struct stat, with : "size" in the name, we're going to put HPAGE_PMD_SIZE in there instead : of PAGE_SIZE, if the tmpfs was mounted with one of the huge "huge" : options (force or always, okay; within_size or advise, not so much). : Though HPAGE_PMD_SIZE is no more its "preferred I/O size" or "blocksize : for file system I/O" than PAGE_SIZE was. : : Which we can expect to speed up some applications and disadvantage : others, depending on how they interpret st_blksize: just like if we : changed it in the same way on non-huge tmpfs. (Did I actually try : changing st_blksize early on, and find it broke something? If so, I've : now forgotten what, and a search through commit messages didn't find : it; but I guess we'll find out soon enough.) : : If there were an mstat() syscall, returning a field "preferred : alignment", then we could certainly agree to put HPAGE_PMD_SIZE in : there; but in stat()'s st_blksize? And what happens when (in future) : mm maps this or that hard-disk filesystem's blocks with a pmd mapping - : should that filesystem then advertise a bigger st_blksize, despite the : same disk layout as before? What happens with DAX? : : And this change is not going to help the QEMU suboptimality that : brought you here (or does QEMU align mmaps according to st_blksize?). : QEMU ought to work well with kernels without this change, and kernels : with this change; and I hope it can easily deal with both by avoiding : that use of MAP_FIXED which prevented the kernel's intended alignment. [akpm@linux-foundation.org: remove unneeded `else'] Link: http://lkml.kernel.org/r/1524665633-83806-1-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:22:05 +0000