| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Our MIPS 1004Kc SoCs were seeing random userspace crashes with SIGILL
and SIGSEGV that could not be traced back to a userspace code bug. They
had all the magic signs of an I/D cache coherency issue.
Now recently we noticed that the /proc/sys/vm/compact_memory interface
was quite efficient at provoking this class of userspace crashes.
Studying the code in mm/migrate.c there is a distinction made between
migrating a page that is mapped at the instant of migration and one that
is not mapped. Our problem turned out to be the non-mapped pages.
For the non-mapped page the code performs a copy of the page content and
all relevant meta-data of the page without doing the required D-cache
maintenance. This leaves dirty data in the D-cache of the CPU and on
the 1004K cores this data is not visible to the I-cache. A subsequent
page-fault that triggers a mapping of the page will happily serve the
process with potentially stale code.
What about ARM then, this bug should have seen greater exposure? Well
ARM became immune to this flaw back in 2010, see commit c01778001a4f
("ARM: 6379/1: Assume new page cache pages have dirty D-cache").
My proposed fix moves the D-cache maintenance inside move_to_new_page to
make it common for both cases.
Link: http://lkml.kernel.org/r/20190315083502.11849-1-larper@axis.com
Fixes: 97ee0524614 ("flush cache before installing new page at migraton")
Signed-off-by: Lars Persson <larper@axis.com>
Reviewed-by: Paul Burton <paul.burton@mips.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Andrea has noted that page migration code propagates page_mapping(page)
through the whole migration stack down to migrate_page() function so it
seems stupid to then use page_mapping(page) in expected_page_refs()
instead of passed down 'mapping' argument. I agree so let's make
expected_page_refs() more in line with the rest of the migration stack.
Link: http://lkml.kernel.org/r/20190207112314.24872-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No functional change.
Link: http://lkml.kernel.org/r/20190118235123.27843-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pages with no migration handler use a fallback handler which sometimes
works and sometimes persistently retries. A historical example was
blockdev pages but there are others such as odd refcounting when
page->private is used. These are retried multiple times which is
wasteful during compaction so this patch will fail migration faster
unless the caller specifies MIGRATE_SYNC.
This is not expected to help THP allocation success rates but it did
reduce latencies very slightly in some cases.
1-socket thpfioscale
4.20.0 4.20.0
noreserved-v2r15 failfast-v2r15
Amean fault-both-1 0.00 ( 0.00%) 0.00 * 0.00%*
Amean fault-both-3 3839.67 ( 0.00%) 3833.72 ( 0.15%)
Amean fault-both-5 5177.47 ( 0.00%) 4967.15 ( 4.06%)
Amean fault-both-7 7245.03 ( 0.00%) 7139.19 ( 1.46%)
Amean fault-both-12 11534.89 ( 0.00%) 11326.30 ( 1.81%)
Amean fault-both-18 16241.10 ( 0.00%) 16270.70 ( -0.18%)
Amean fault-both-24 19075.91 ( 0.00%) 19839.65 ( -4.00%)
Amean fault-both-30 22712.11 ( 0.00%) 21707.05 ( 4.43%)
Amean fault-both-32 21692.92 ( 0.00%) 21968.16 ( -1.27%)
The 2-socket results are not materially different. Scan rates are
similar as expected.
Link: http://lkml.kernel.org/r/20190118175136.31341-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "arm64/mm: Enable HugeTLB migration", v4.
This patch series enables HugeTLB migration support for all supported
huge page sizes at all levels including contiguous bit implementation.
Following HugeTLB migration support matrix has been enabled with this
patch series. All permutations have been tested except for the 16GB.
CONT PTE PMD CONT PMD PUD
-------- --- -------- ---
4K: 64K 2M 32M 1G
16K: 2M 32M 1G
64K: 2M 512M 16G
First the series adds migration support for PUD based huge pages. It
then adds a platform specific hook to query an architecture if a given
huge page size is supported for migration while also providing a default
fallback option preserving the existing semantics which just checks for
(PMD|PUD|PGDIR)_SHIFT macros. The last two patches enables HugeTLB
migration on arm64 and subscribe to this new platform specific hook by
defining an override.
The second patch differentiates between movability and migratability
aspects of huge pages and implements hugepage_movable_supported() which
can then be used during allocation to decide whether to place the huge
page in movable zone or not.
This patch (of 5):
During huge page allocation it's migratability is checked to determine
if it should be placed under movable zones with GFP_HIGHUSER_MOVABLE.
But the movability aspect of the huge page could depend on other factors
than just migratability. Movability in itself is a distinct property
which should not be tied with migratability alone.
This differentiates these two and implements an enhanced movability check
which also considers huge page size to determine if it is feasible to be
placed under a movable zone. At present it just checks for gigantic pages
but going forward it can incorporate other enhanced checks.
Link: http://lkml.kernel.org/r/1545121450-1663-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We had a race in the old balloon compaction code before b1123ea6d3b3
("mm: balloon: use general non-lru movable page feature") refactored it
that became visible after backporting 195a8c43e93d ("virtio-balloon:
deflate via a page list") without the refactoring.
The bug existed from commit d6d86c0a7f8d ("mm/balloon_compaction:
redesign ballooned pages management") till b1123ea6d3b3 ("mm: balloon:
use general non-lru movable page feature"). d6d86c0a7f8d
("mm/balloon_compaction: redesign ballooned pages management") was
backported to 3.12, so the broken kernels are stable kernels [3.12 -
4.7].
There was a subtle race between dropping the page lock of the newpage in
__unmap_and_move() and checking for __is_movable_balloon_page(newpage).
Just after dropping this page lock, virtio-balloon could go ahead and
deflate the newpage, effectively dequeueing it and clearing PageBalloon,
in turn making __is_movable_balloon_page(newpage) fail.
This resulted in dropping the reference of the newpage via
putback_lru_page(newpage) instead of put_page(newpage), leading to
page->lru getting modified and a !LRU page ending up in the LRU lists.
With 195a8c43e93d ("virtio-balloon: deflate via a page list")
backported, one would suddenly get corrupted lists in
release_pages_balloon():
- WARNING: CPU: 13 PID: 6586 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0
- list_del corruption. prev->next should be ffffe253961090a0, but was dead000000000100
Nowadays this race is no longer possible, but it is hidden behind very
ugly handling of __ClearPageMovable() and __PageMovable().
__ClearPageMovable() will not make __PageMovable() fail, only
PageMovable(). So the new check (__PageMovable(newpage)) will still
hold even after newpage was dequeued by virtio-balloon.
If anybody would ever change that special handling, the BUG would be
introduced again. So instead, make it explicit and use the information
of the original isolated page before migration.
This patch can be backported fairly easy to stable kernels (in contrast
to the refactoring).
Link: http://lkml.kernel.org/r/20190129233217.10747-1-david@redhat.com
Fixes: d6d86c0a7f8d ("mm/balloon_compaction: redesign ballooned pages management")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Vratislav Bendel <vbendel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vratislav Bendel <vbendel@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <k.khlebnikov@samsung.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [3.12 - 4.7]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, buffer_migrate_page_norefs() was constantly failing because
buffer_migrate_lock_buffers() grabbed reference on each buffer. In
fact, there's no reason for buffer_migrate_lock_buffers() to grab any
buffer references as the page is locked during all our operation and
thus nobody can reclaim buffers from the page.
So remove grabbing of buffer references which also makes
buffer_migrate_page_norefs() succeed.
Link: http://lkml.kernel.org/r/20190116131217.7226-1-jack@suse.cz
Fixes: 89cb0888ca14 "mm: migrate: provide buffer_migrate_page_norefs()"
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts b43a9990055958e70347c56f90ea2ae32c67334c
The reverted commit caused issues with migration and poisoning of anon
huge pages. The LTP move_pages12 test will cause an "unable to handle
kernel NULL pointer" BUG would occur with stack similar to:
RIP: 0010:down_write+0x1b/0x40
Call Trace:
migrate_pages+0x81f/0xb90
__ia32_compat_sys_migrate_pages+0x190/0x190
do_move_pages_to_node.isra.53.part.54+0x2a/0x50
kernel_move_pages+0x566/0x7b0
__x64_sys_move_pages+0x24/0x30
do_syscall_64+0x5b/0x180
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The purpose of the reverted patch was to fix some long existing races
with huge pmd sharing. It used i_mmap_rwsem for this purpose with the
idea that this could also be used to address truncate/page fault races
with another patch. Further analysis has determined that i_mmap_rwsem
can not be used to address all these hugetlbfs synchronization issues.
Therefore, revert this patch while working an another approach to the
underlying issues.
Link: http://lkml.kernel.org/r/20190103235452.29335-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Add support for fast mremap".
This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems. There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work. Also we find that there is no point in passing the 'address' to
pte_alloc since its unused. This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well. Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.
Build and boot tested on x86-64. Build tested on arm64. The config
enablement patch for arm64 will be posted in the future after more
testing.
The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.
// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.
virtual patch
@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@
fn(...
- , T2 E2
)
{ ... }
@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)
@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)
@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
fn(...
-, E2
)
@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@
(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)
Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While looking at BUGs associated with invalid huge page map counts, it was
discovered and observed that a huge pte pointer could become 'invalid' and
point to another task's page table. Consider the following:
A task takes a page fault on a shared hugetlbfs file and calls
huge_pte_alloc to get a ptep. Suppose the returned ptep points to a
shared pmd.
Now, another task truncates the hugetlbfs file. As part of truncation, it
unmaps everyone who has the file mapped. If the range being truncated is
covered by a shared pmd, huge_pmd_unshare will be called. For all but the
last user of the shared pmd, huge_pmd_unshare will clear the pud pointing
to the pmd. If the task in the middle of the page fault is not the last
user, the ptep returned by huge_pte_alloc now points to another task's
page table or worse. This leads to bad things such as incorrect page
map/reference counts or invalid memory references.
To fix, expand the use of i_mmap_rwsem as follows:
- i_mmap_rwsem is held in read mode whenever huge_pmd_share is called.
huge_pmd_share is only called via huge_pte_alloc, so callers of
huge_pte_alloc take i_mmap_rwsem before calling. In addition, callers
of huge_pte_alloc continue to hold the semaphore until finished with the
ptep.
- i_mmap_rwsem is held in write mode whenever huge_pmd_unshare is
called.
[mike.kravetz@oracle.com: add explicit check for mapping != null]
Link: http://lkml.kernel.org/r/20181218223557.5202-2-mike.kravetz@oracle.com
Fixes: 39dde65c9940 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All callers of migrate_page_move_mapping() now pass NULL for 'head'
argument. Drop it.
Link: http://lkml.kernel.org/r/20181211172143.7358-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Provide a variant of buffer_migrate_page() that also checks whether there
are no unexpected references to buffer heads. This function will then be
safe to use for block device pages.
[akpm@linux-foundation.org: remove EXPORT_SYMBOL(buffer_migrate_page_norefs)]
Link: http://lkml.kernel.org/r/20181211172143.7358-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
buffer_migrate_page() is the only caller of migrate_page_lock_buffers()
move it close to it and also drop the now unused stub for !CONFIG_BLOCK.
Link: http://lkml.kernel.org/r/20181211172143.7358-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Lock buffers before calling into migrate_page_move_mapping() so that that
function doesn't have to know about buffers (which is somewhat unexpected
anyway) and all the buffer head logic is in buffer_migrate_page().
Link: http://lkml.kernel.org/r/20181211172143.7358-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: migrate: Fix page migration stalls for blkdev pages".
This patchset deals with page migration stalls that were reported by our
customer due to a block device page that had a bufferhead that was in the
bh LRU cache.
The patchset modifies the page migration code so that bufferheads are
completely handled inside buffer_migrate_page() and then provides a new
migration helper for pages with buffer heads that is safe to use even for
block device pages and that also deals with bh lrus.
This patch (of 6):
Factor out function to compute number of expected page references in
migrate_page_move_mapping(). Note that we move hpage_nr_pages() and
page_has_private() checks from under xas_lock_irq() however this is safe
since we hold page lock.
[jack@suse.cz: fix expected_page_refs()]
Link: http://lkml.kernel.org/r/20181217131710.GB8611@quack2.suse.cz
Link: http://lkml.kernel.org/r/20181211172143.7358-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To avoid having to change many call sites everytime we want to add a
parameter use a structure to group all parameters for the mmu_notifier
invalidate_range_start/end cakks. No functional changes with this patch.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20181205053628.3210-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
From: Jérôme Glisse <jglisse@redhat.com>
Subject: mm/mmu_notifier: use structure for invalidate_range_start/end calls v3
fix build warning in migrate.c when CONFIG_MMU_NOTIFIER=n
Link: http://lkml.kernel.org/r/20181213171330.8489-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Waiting on a page migration entry has used wait_on_page_locked() all along
since 2006: but you cannot safely wait_on_page_locked() without holding a
reference to the page, and that extra reference is enough to make
migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults
on the entry before migrate_page_move_mapping() gets there.
And that failure is retried nine times, amplifying the pain when trying to
migrate a popular page. With a single persistent faulter, migration
sometimes succeeds; with two or three concurrent faulters, success becomes
much less likely (and the more the page was mapped, the worse the overhead
of unmapping and remapping it on each try).
This is especially a problem for memory offlining, where the outer level
retries forever (or until terminated from userspace), because a heavy
refault workload can trigger an endless loop of migration failures.
wait_on_page_locked() is the wrong tool for the job.
David Herrmann (but was he the first?) noticed this issue in 2014:
https://marc.info/?l=linux-mm&m=140110465608116&w=2
Tim Chen started a thread in August 2017 which appears relevant:
https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went
on to implicate __migration_entry_wait():
https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended
up with the v4.14 commits: 2554db916586 ("sched/wait: Break up long wake
list walk") 11a19c7b099f ("sched/wait: Introduce wakeup boomark in
wake_up_page_bit")
Baoquan He reported "Memory hotplug softlock issue" 14 November 2018:
https://marc.info/?l=linux-mm&m=154217936431300&w=2
We have all assumed that it is essential to hold a page reference while
waiting on a page lock: partly to guarantee that there is still a struct
page when MEMORY_HOTREMOVE is configured, but also to protect against
reuse of the struct page going to someone who then holds the page locked
indefinitely, when the waiter can reasonably expect timely unlocking.
But in fact, so long as wait_on_page_bit_common() does the put_page(), and
is careful not to rely on struct page contents thereafter, there is no
need to hold a reference to the page while waiting on it. That does mean
that this case cannot go back through the loop: but that's fine for the
page migration case, and even if used more widely, is limited by the "Stop
walking if it's locked" optimization in wake_page_function().
Add interface put_and_wait_on_page_locked() to do this, using "behavior"
enum in place of "lock" arg to wait_on_page_bit_common() to implement it.
No interruptible or killable variant needed yet, but they might follow: I
have a vague notion that reporting -EINTR should take precedence over
return from wait_on_page_bit_common() without knowing the page state, so
arrange it accordingly - but that may be nothing but pedantic.
__migration_entry_wait() still has to take a brief reference to the page,
prior to calling put_and_wait_on_page_locked(): but now that it is dropped
before waiting, the chance of impeding page migration is very much
reduced. Should we perhaps disable preemption across this?
shrink_page_list()'s __ClearPageLocked(): that was a surprise! This
survived a lot of testing before that showed up. PageWaiters may have
been set by wait_on_page_bit_common(), and the reference dropped, just
before shrink_page_list() succeeds in freezing its last page reference: in
such a case, unlock_page() must be used. Follow the suggestion from
Michal Hocko, just revert a978d6f52106 ("mm: unlockless reclaim") now:
that optimization predates PageWaiters, and won't buy much these days; but
we can reinstate it for the !PageWaiters case if anyone notices.
It does raise the question: should vmscan.c's is_page_cache_freeable() and
__remove_mapping() now treat a PageWaiters page as if an extra reference
were held? Perhaps, but I don't think it matters much, since
shrink_page_list() already had to win its trylock_page(), so waiters are
not very common there: I noticed no difference when trying the bigger
change, and it's surely not needed while put_and_wait_on_page_locked() is
only used for page migration.
[willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull XArray conversion from Matthew Wilcox:
"The XArray provides an improved interface to the radix tree data
structure, providing locking as part of the API, specifying GFP flags
at allocation time, eliminating preloading, less re-walking the tree,
more efficient iterations and not exposing RCU-protected pointers to
its users.
This patch set
1. Introduces the XArray implementation
2. Converts the pagecache to use it
3. Converts memremap to use it
The page cache is the most complex and important user of the radix
tree, so converting it was most important. Converting the memremap
code removes the only other user of the multiorder code, which allows
us to remove the radix tree code that supported it.
I have 40+ followup patches to convert many other users of the radix
tree over to the XArray, but I'd like to get this part in first. The
other conversions haven't been in linux-next and aren't suitable for
applying yet, but you can see them in the xarray-conv branch if you're
interested"
* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
radix tree: Remove multiorder support
radix tree test: Convert multiorder tests to XArray
radix tree tests: Convert item_delete_rcu to XArray
radix tree tests: Convert item_kill_tree to XArray
radix tree tests: Move item_insert_order
radix tree test suite: Remove multiorder benchmarking
radix tree test suite: Remove __item_insert
memremap: Convert to XArray
xarray: Add range store functionality
xarray: Move multiorder_check to in-kernel tests
xarray: Move multiorder_shrink to kernel tests
xarray: Move multiorder account test in-kernel
radix tree test suite: Convert iteration test to XArray
radix tree test suite: Convert tag_tagged_items to XArray
radix tree: Remove radix_tree_clear_tags
radix tree: Remove radix_tree_maybe_preload_order
radix tree: Remove split/join code
radix tree: Remove radix_tree_update_node_t
page cache: Finish XArray conversion
dax: Convert page fault handlers to XArray
...
|
|
There should be no cache left by the time we overwrite the old transhuge
pmd with the new one. It's already too late to flush through the virtual
address because we already copied the page data to the new physical
address.
So flush the cache before the data copy.
Also delete the "end" variable to shutoff a "unused variable" warning on
x86 where flush_cache_range() is a noop.
Link: http://lkml.kernel.org/r/20181015202311.7209-1-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
change_huge_pmd() after arming the numa/protnone pmd doesn't flush the TLB
right away. do_huge_pmd_numa_page() flushes the TLB before calling
migrate_misplaced_transhuge_page(). By the time do_huge_pmd_numa_page()
runs some CPU could still access the page through the TLB.
change_huge_pmd() before arming the numa/protnone transhuge pmd calls
mmu_notifier_invalidate_range_start(). So there's no need of
mmu_notifier_invalidate_range_start()/mmu_notifier_invalidate_range_only_end()
sequence in migrate_misplaced_transhuge_page() too, because by the time
migrate_misplaced_transhuge_page() runs, the pmd mapping has already been
invalidated in the secondary MMUs. It has to or if a secondary MMU can
still write to the page, the migrate_page_copy() would lose data.
However an explicit mmu_notifier_invalidate_range() is needed before
migrate_misplaced_transhuge_page() starts copying the data of the
transhuge page or the below can happen for MMU notifier users sharing the
primary MMU pagetables and only implementing ->invalidate_range:
CPU0 CPU1 GPU sharing linux pagetables using
only ->invalidate_range
----------- ------------ ---------
GPU secondary MMU writes to the page
mapped by the transhuge pmd
change_pmd_range()
mmu..._range_start()
->invalidate_range_start() noop
change_huge_pmd()
set_pmd_at(numa/protnone)
pmd_unlock()
do_huge_pmd_numa_page()
CPU TLB flush globally (1)
CPU cannot write to page
migrate_misplaced_transhuge_page()
GPU writes to the page...
migrate_page_copy()
...GPU stops writing to the page
CPU TLB flush (2)
mmu..._range_end() (3)
->invalidate_range_stop() noop
->invalidate_range()
GPU secondary MMU is invalidated
and cannot write to the page anymore
(too late)
Just like we need a CPU TLB flush (1) because the TLB flush (2) arrives
too late, we also need a mmu_notifier_invalidate_range() before calling
migrate_misplaced_transhuge_page(), because the ->invalidate_range() in
(3) also arrives too late.
This requirement is the result of the lazy optimization in
change_huge_pmd() that releases the pmd_lock without first flushing the
TLB and without first calling mmu_notifier_invalidate_range().
Even converting the removed mmu_notifier_invalidate_range_only_end() into
a mmu_notifier_invalidate_range_end() would not have been enough to fix
this, because it run after migrate_page_copy().
After the hugepage data copy is done migrate_misplaced_transhuge_page()
can proceed and call set_pmd_at without having to flush the TLB nor any
secondary MMUs because the secondary MMU invalidate, just like the CPU TLB
flush, has to happen before the migrate_page_copy() is called or it would
be a bug in the first place (and it was for drivers using
->invalidate_range()).
KVM is unaffected because it doesn't implement ->invalidate_range().
The standard PAGE_SIZEd migrate_misplaced_page is less accelerated and
uses the generic migrate_pages which transitions the pte from
numa/protnone to a migration entry in try_to_unmap_one() and flushes TLBs
and all mmu notifiers there before copying the page.
Link: http://lkml.kernel.org/r/20181013002430.698-3-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "migrate_misplaced_transhuge_page race conditions".
Aaron found a new instance of the THP MADV_DONTNEED race against
pmdp_clear_flush* variants, that was apparently left unfixed.
While looking into the race found by Aaron, I may have found two more
issues in migrate_misplaced_transhuge_page.
These race conditions would not cause kernel instability, but they'd
corrupt userland data or leave data non zero after MADV_DONTNEED.
I did only minor testing, and I don't expect to be able to reproduce this
(especially the lack of ->invalidate_range before migrate_page_copy,
requires the latest iommu hardware or infiniband to reproduce). The last
patch is noop for x86 and it needs further review from maintainers of
archs that implement flush_cache_range() (not in CC yet).
To avoid confusion, it's not the first patch that introduces the bug fixed
in the second patch, even before removing the
pmdp_huge_clear_flush_notify, that _notify suffix was called after
migrate_page_copy already run.
This patch (of 3):
This is a corollary of ced108037c2aa ("thp: fix MADV_DONTNEED vs. numa
balancing race"), 58ceeb6bec8 ("thp: fix MADV_DONTNEED vs. MADV_FREE
race") and 5b7abeae3af8c ("thp: fix MADV_DONTNEED vs clear soft dirty
race).
When the above three fixes where posted Dave asked
https://lkml.kernel.org/r/929b3844-aec2-0111-fef7-8002f9d4e2b9@intel.com
but apparently this was missed.
The pmdp_clear_flush* in migrate_misplaced_transhuge_page() was introduced
in a54a407fbf7 ("mm: Close races between THP migration and PMD numa
clearing").
The important part of such commit is only the part where the page lock is
not released until the first do_huge_pmd_numa_page() finished disarming
the pagenuma/protnone.
The addition of pmdp_clear_flush() wasn't beneficial to such commit and
there's no commentary about such an addition either.
I guess the pmdp_clear_flush() in such commit was added just in case for
safety, but it ended up introducing the MADV_DONTNEED race condition found
by Aaron.
At that point in time nobody thought of such kind of MADV_DONTNEED race
conditions yet (they were fixed later) so the code may have looked more
robust by adding the pmdp_clear_flush().
This specific race condition won't destabilize the kernel, but it can
confuse userland because after MADV_DONTNEED the memory won't be zeroed
out.
This also optimizes the code and removes a superfluous TLB flush.
[akpm@linux-foundation.org: reflow comment to 80 cols, fix grammar and typo (beacuse)]
Link: http://lkml.kernel.org/r/20181013002430.698-2-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Refaults happen during transitions between workingsets as well as in-place
thrashing. Knowing the difference between the two has a range of
applications, including measuring the impact of memory shortage on the
system performance, as well as the ability to smarter balance pressure
between the filesystem cache and the swap-backed workingset.
During workingset transitions, inactive cache refaults and pushes out
established active cache. When that active cache isn't stale, however,
and also ends up refaulting, that's bonafide thrashing.
Introduce a new page flag that tells on eviction whether the page has been
active or not in its lifetime. This bit is then stored in the shadow
entry, to classify refaults as transitioning or thrashing.
How many page->flags does this leave us with on 32-bit?
20 bits are always page flags
21 if you have an MMU
23 with the zone bits for DMA, Normal, HighMem, Movable
29 with the sparsemem section bits
30 if PAE is enabled
31 with this patch.
So on 32-bit PAE, that leaves 1 bit for distinguishing two NUMA nodes. If
that's not enough, the system can switch to discontigmem and re-gain the 6
or 7 sparsemem section bits.
Link: http://lkml.kernel.org/r/20180828172258.3185-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Matthew Wilcox <willy@infradead.org>
|
|
* akpm:
mm: madvise(MADV_DODUMP): allow hugetlbfs pages
ocfs2: fix locking for res->tracking and dlm->tracking_list
mm/vmscan.c: fix int overflow in callers of do_shrink_slab()
mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly
mm/vmstat.c: fix outdated vmstat_text
proc: restrict kernel stack dumps to root
mm/hugetlb: add mmap() encodings for 32MB and 512MB page sizes
mm/migrate.c: split only transparent huge pages when allocation fails
ipc/shm.c: use ERR_CAST() for shm_lock() error return
mm/gup_benchmark: fix unsigned comparison to zero in __gup_benchmark_ioctl
mm, thp: fix mlocking THP page with migration enabled
ocfs2: fix crash in ocfs2_duplicate_clusters_by_page()
hugetlb: take PMD sharing into account when flushing tlb/caches
mm: migration: fix migration of huge PMD shared pages
|
|
split_huge_page_to_list() fails on HugeTLB pages. I was experimenting
with moving 32MB contig HugeTLB pages on arm64 (with a debug patch
applied) and hit the following stack trace when the kernel crashed.
[ 3732.462797] Call trace:
[ 3732.462835] split_huge_page_to_list+0x3b0/0x858
[ 3732.462913] migrate_pages+0x728/0xc20
[ 3732.462999] soft_offline_page+0x448/0x8b0
[ 3732.463097] __arm64_sys_madvise+0x724/0x850
[ 3732.463197] el0_svc_handler+0x74/0x110
[ 3732.463297] el0_svc+0x8/0xc
[ 3732.463347] Code: d1000400 f90b0e60 f2fbd5a2 a94982a1 (f9000420)
When unmap_and_move[_huge_page]() fails due to lack of memory, the
splitting should happen only for transparent huge pages not for HugeTLB
pages. PageTransHuge() returns true for both THP and HugeTLB pages.
Hence the conditonal check should test PagesHuge() flag to make sure that
given pages is not a HugeTLB one.
Link: http://lkml.kernel.org/r/1537798495-4996-1-git-send-email-anshuman.khandual@arm.com
Fixes: 94723aafb9 ("mm: unclutter THP migration")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A transparent huge page is represented by a single entry on an LRU list.
Therefore, we can only make unevictable an entire compound page, not
individual subpages.
If a user tries to mlock() part of a huge page, we want the rest of the
page to be reclaimable.
We handle this by keeping PTE-mapped huge pages on normal LRU lists: the
PMD on border of VM_LOCKED VMA will be split into PTE table.
Introduction of THP migration breaks[1] the rules around mlocking THP
pages. If we had a single PMD mapping of the page in mlocked VMA, the
page will get mlocked, regardless of PTE mappings of the page.
For tmpfs/shmem it's easy to fix by checking PageDoubleMap() in
remove_migration_pmd().
Anon THP pages can only be shared between processes via fork(). Mlocked
page can only be shared if parent mlocked it before forking, otherwise CoW
will be triggered on mlock().
For Anon-THP, we can fix the issue by munlocking the page on removing PTE
migration entry for the page. PTEs for the page will always come after
mlocked PMD: rmap walks VMAs from oldest to newest.
Test-case:
#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>
#include <linux/mempolicy.h>
#include <numaif.h>
int main(void)
{
unsigned long nodemask = 4;
void *addr;
addr = mmap((void *)0x20000000UL, 2UL << 20, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_LOCKED, -1, 0);
if (fork()) {
wait(NULL);
return 0;
}
mlock(addr, 4UL << 10);
mbind(addr, 2UL << 20, MPOL_PREFERRED | MPOL_F_RELATIVE_NODES,
&nodemask, 4, MPOL_MF_MOVE);
return 0;
}
[1] https://lkml.kernel.org/r/CAOMGZ=G52R-30rZvhGxEbkTw7rLLwBGadVYeo--iizcD3upL3A@mail.gmail.com
Link: http://lkml.kernel.org/r/20180917133816.43995-1-kirill.shutemov@linux.intel.com
Fixes: 616b8371539a ("mm: thp: enable thp migration in generic path")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rate limiting of page migrations due to automatic NUMA balancing was
introduced to mitigate the worst-case scenario of migrating at high
frequency due to false sharing or slowly ping-ponging between nodes.
Since then, a lot of effort was spent on correctly identifying these
pages and avoiding unnecessary migrations and the safety net may no longer
be required.
Jirka Hladky reported a regression in 4.17 due to a scheduler patch that
avoids spreading STREAM tasks wide prematurely. However, once the task
was properly placed, it delayed migrating the memory due to rate limiting.
Increasing the limit fixed the problem for him.
Currently, the limit is hard-coded and does not account for the real
capabilities of the hardware. Even if an estimate was attempted, it would
not properly account for the number of memory controllers and it could
not account for the amount of bandwidth used for normal accesses. Rather
than fudging, this patch simply eliminates the rate limiting.
However, Jirka reports that a STREAM configuration using multiple
processes achieved similar performance to 4.16. In local tests, this patch
improved performance of STREAM relative to the baseline but it is somewhat
machine-dependent. Most workloads show little or not performance difference
implying that there is not a heavily reliance on the throttling mechanism
and it is safe to remove.
STREAM on 2-socket machine
4.19.0-rc5 4.19.0-rc5
numab-v1r1 noratelimit-v1r1
MB/sec copy 43298.52 ( 0.00%) 44673.38 ( 3.18%)
MB/sec scale 30115.06 ( 0.00%) 31293.06 ( 3.91%)
MB/sec add 32825.12 ( 0.00%) 34883.62 ( 6.27%)
MB/sec triad 32549.52 ( 0.00%) 34906.60 ( 7.24%
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-MM <linux-mm@kvack.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181001100525.29789-2-mgorman@techsingularity.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since this spinlock will only serialize the migrate rate limiting,
convert the spin_lock() to a spin_trylock(). If another thread is updating, this
task can move on.
Specjbb2005 results (8 warehouses)
Higher bops are better
2 Socket - 2 Node Haswell - X86
JVMS Prev Current %Change
4 205332 198512 -3.32145
1 319785 313559 -1.94693
2 Socket - 4 Node Power8 - PowerNV
JVMS Prev Current %Change
8 74912 74761.9 -0.200368
1 206585 214874 4.01239
2 Socket - 2 Node Power9 - PowerNV
JVMS Prev Current %Change
4 189162 180536 -4.56011
1 213760 210281 -1.62753
4 Socket - 4 Node Power7 - PowerVM
JVMS Prev Current %Change
8 58736.8 56511.4 -3.78877
1 105419 104899 -0.49327
Avoiding stretching of window intervals may be the reason for the
regression. Also code now uses READ_ONCE/WRITE_ONCE. That may
also be hurting performance to some extent.
Some events stats before and after applying the patch.
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 14,285,708 13,818,546
migrations 1,180,621 1,149,960
faults 339,114 385,583
cache-misses 55,205,631,894 55,259,546,768
sched:sched_move_numa 843 2,257
sched:sched_stick_numa 6 9
sched:sched_swap_numa 219 512
migrate:mm_migrate_pages 365 2,225
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 26907 72692
numa_hint_faults_local 24279 62270
numa_hit 239771 238762
numa_huge_pte_updates 0 48
numa_interleave 68 75
numa_local 239688 238676
numa_other 83 86
numa_pages_migrated 363 2225
numa_pte_updates 27415 98557
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
cs 3,202,779 3,173,490
migrations 37,186 36,966
faults 106,076 108,776
cache-misses 12,024,873,744 12,200,075,320
sched:sched_move_numa 931 1,264
sched:sched_stick_numa 0 0
sched:sched_swap_numa 1 0
migrate:mm_migrate_pages 637 899
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Haswell - X86
Event Before After
numa_hint_faults 17409 21109
numa_hint_faults_local 14367 17120
numa_hit 73953 72934
numa_huge_pte_updates 20 42
numa_interleave 25 33
numa_local 73892 72866
numa_other 61 68
numa_pages_migrated 668 915
numa_pte_updates 27276 42326
perf stats 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 8,474,013 8,312,022
migrations 254,934 231,705
faults 320,506 310,242
cache-misses 110,580,458 402,324,573
sched:sched_move_numa 725 193
sched:sched_stick_numa 0 0
sched:sched_swap_numa 7 3
migrate:mm_migrate_pages 145 93
vmstat 8th warehouse Multi JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 22797 11838
numa_hint_faults_local 21539 11216
numa_hit 89308 90689
numa_huge_pte_updates 0 0
numa_interleave 865 1579
numa_local 88955 89634
numa_other 353 1055
numa_pages_migrated 149 92
numa_pte_updates 22930 12109
perf stats 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
cs 2,195,628 2,170,481
migrations 11,179 10,126
faults 149,656 160,962
cache-misses 8,117,515 10,834,845
sched:sched_move_numa 49 10
sched:sched_stick_numa 0 0
sched:sched_swap_numa 0 0
migrate:mm_migrate_pages 5 2
vmstat 8th warehouse Single JVM 2 Socket - 2 Node Power9 - PowerNV
Event Before After
numa_hint_faults 3577 403
numa_hint_faults_local 3476 358
numa_hit 26142 25898
numa_huge_pte_updates 0 0
numa_interleave 358 207
numa_local 26042 25860
numa_other 100 38
numa_pages_migrated 5 2
numa_pte_updates 3587 400
perf stats 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 100,602,296 110,339,633
migrations 4,135,630 4,139,812
faults 789,256 863,622
cache-misses 226,160,621,058 231,838,045,660
sched:sched_move_numa 1,366 2,196
sched:sched_stick_numa 16 33
sched:sched_swap_numa 374 544
migrate:mm_migrate_pages 1,350 2,469
vmstat 8th warehouse Multi JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 47857 85748
numa_hint_faults_local 39768 66831
numa_hit 240165 242213
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 240165 242211
numa_other 0 2
numa_pages_migrated 1224 2376
numa_pte_updates 48354 86233
perf stats 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
cs 58,515,496 59,331,057
migrations 564,845 552,019
faults 245,807 266,586
cache-misses 73,603,757,976 73,796,312,990
sched:sched_move_numa 996 981
sched:sched_stick_numa 10 54
sched:sched_swap_numa 193 286
migrate:mm_migrate_pages 646 713
vmstat 8th warehouse Single JVM 4 Socket - 4 Node Power7 - PowerVM
Event Before After
numa_hint_faults 13422 14807
numa_hint_faults_local 5619 5738
numa_hit 36118 36230
numa_huge_pte_updates 0 0
numa_interleave 0 0
numa_local 36116 36228
numa_other 2 2
numa_pages_migrated 616 703
numa_pte_updates 13374 14742
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jirka Hladky <jhladky@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537552141-27815-6-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A process can be killed with SIGBUS(BUS_MCEERR_AR) when it tries to
allocate a page that was just freed on the way of soft-offline. This is
undesirable because soft-offline (which is about corrected error) is
less aggressive than hard-offline (which is about uncorrected error),
and we can make soft-offline fail and keep using the page for good
reason like "system is busy."
Two main changes of this patch are:
- setting migrate type of the target page to MIGRATE_ISOLATE. As done
in free_unref_page_commit(), this makes kernel bypass pcplist when
freeing the page. So we can assume that the page is in freelist just
after put_page() returns,
- setting PG_hwpoison on free page under zone->lock which protects
freelists, so this allows us to avoid setting PG_hwpoison on a page
that is decided to be allocated soon.
[akpm@linux-foundation.org: tweak set_hwpoison_free_buddy_page() comment]
Link: http://lkml.kernel.org/r/1531452366-11661-3-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <zy.zhengyi@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: soft-offline: fix race against page allocation".
Xishi recently reported the issue about race on reusing the target pages
of soft offlining. Discussion and analysis showed that we need make
sure that setting PG_hwpoison should be done in the right place under
zone->lock for soft offline. 1/2 handles free hugepage's case, and 2/2
hanldes free buddy page's case.
This patch (of 2):
There's a race condition between soft offline and hugetlb_fault which
causes unexpected process killing and/or hugetlb allocation failure.
The process killing is caused by the following flow:
CPU 0 CPU 1 CPU 2
soft offline
get_any_page
// find the hugetlb is free
mmap a hugetlb file
page fault
...
hugetlb_fault
hugetlb_no_page
alloc_huge_page
// succeed
soft_offline_free_page
// set hwpoison flag
mmap the hugetlb file
page fault
...
hugetlb_fault
hugetlb_no_page
find_lock_page
return VM_FAULT_HWPOISON
mm_fault_error
do_sigbus
// kill the process
The hugetlb allocation failure comes from the following flow:
CPU 0 CPU 1
mmap a hugetlb file
// reserve all free page but don't fault-in
soft offline
get_any_page
// find the hugetlb is free
soft_offline_free_page
// set hwpoison flag
dissolve_free_huge_page
// fail because all free hugepages are reserved
page fault
...
hugetlb_fault
hugetlb_no_page
alloc_huge_page
...
dequeue_huge_page_node_exact
// ignore hwpoisoned hugepage
// and finally fail due to no-mem
The root cause of this is that current soft-offline code is written based
on an assumption that PageHWPoison flag should be set at first to avoid
accessing the corrupted data. This makes sense for memory_failure() or
hard offline, but does not for soft offline because soft offline is about
corrected (not uncorrected) error and is safe from data lost. This patch
changes soft offline semantics where it sets PageHWPoison flag only after
containment of the error page completes successfully.
Link: http://lkml.kernel.org/r/1531452366-11661-2-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Suggested-by: Xishi Qiu <xishi.qiuxishi@alibaba-inc.com>
Tested-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <zy.zhengyi@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit cafa0010cd51 ("Raise the minimum required gcc version to 4.6")
recently exposed a brittle part of the build for supporting non-gcc
compilers.
Both Clang and ICC define __GNUC__, __GNUC_MINOR__, and
__GNUC_PATCHLEVEL__ for quick compatibility with code bases that haven't
added compiler specific checks for __clang__ or __INTEL_COMPILER.
This is brittle, as they happened to get compatibility by posing as a
certain version of GCC. This broke when upgrading the minimal version
of GCC required to build the kernel, to a version above what ICC and
Clang claim to be.
Rather than always including compiler-gcc.h then undefining or
redefining macros in compiler-intel.h or compiler-clang.h, let's
separate out the compiler specific macro definitions into mutually
exclusive headers, do more proper compiler detection, and keep shared
definitions in compiler_types.h.
Fixes: cafa0010cd51 ("Raise the minimum required gcc version to 4.6")
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Eli Friedman <efriedma@codeaurora.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch is reworked from an earlier patch that Dan has posted:
https://patchwork.kernel.org/patch/10131727/
VM_MIXEDMAP is used by dax to direct mm paths like vm_normal_page() that
the memory page it is dealing with is not typical memory from the linear
map. The get_user_pages_fast() path, since it does not resolve the vma,
is already using {pte,pmd}_devmap() as a stand-in for VM_MIXEDMAP, so we
use that as a VM_MIXEDMAP replacement in some locations. In the cases
where there is no pte to consult we fallback to using vma_is_dax() to
detect the VM_MIXEDMAP special case.
Now that we have explicit driver pfn_t-flag opt-in/opt-out for
get_user_pages() support for DAX we can stop setting VM_MIXEDMAP. This
also means we no longer need to worry about safely manipulating vm_flags
in a future where we support dynamically changing the dax mode of a
file.
DAX should also now be supported with madvise_behavior(), vma_merge(),
and copy_page_range().
This patch has been tested against ndctl unit test. It has also been
tested against xfstests commit: 625515d using fake pmem created by
memmap and no additional issues have been observed.
Link: http://lkml.kernel.org/r/152847720311.55924.16999195879201817653.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
radix_tree_replace_slot() is called twice for head page, it's obviously
a bug. Let's fix it.
Link: http://lkml.kernel.org/r/20180423072101.GA12157@hori1.linux.bs1.fc.nec.co.jp
Fixes: e71769ae5260 ("mm: enable thp migration for shmem thp")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Zi Yan <zi.yan@sent.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
My testing for the latest kernel supporting thp migration showed an
infinite loop in offlining the memory block that is filled with shmem
thps. We can get out of the loop with a signal, but kernel should return
with failure in this case.
What happens in the loop is that scan_movable_pages() repeats returning
the same pfn without any progress. That's because page migration always
fails for shmem thps.
In memory offline code, memory blocks containing unmovable pages should be
prevented from being offline targets by has_unmovable_pages() inside
start_isolate_page_range(). So it's possible to change migratability for
non-anonymous thps to avoid the issue, but it introduces more complex and
thp-specific handling in migration code, so it might not good.
So this patch is suggesting to fix the issue by enabling thp migration for
shmem thp. Both of anon/shmem thp are migratable so we don't need
precheck about the type of thps.
Link: http://lkml.kernel.org/r/20180406030706.GA2434@hori1.linux.bs1.fc.nec.co.jp
Fixes: commit 72b39cfc4d75 ("mm, memory_hotplug: do not fail offlining too early")
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <zi.yan@sent.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Li Wang has reported that LTP move_pages04 test fails with the current
tree:
LTP move_pages04:
TFAIL : move_pages04.c:143: status[1] is EPERM, expected EFAULT
The test allocates an array of two pages, one is present while the other
is not (resp. backed by zero page) and it expects EFAULT for the second
page as the man page suggests. We are reporting EPERM which doesn't make
any sense and this is a result of a bug from cf5f16b23ec9 ("mm: unclutter
THP migration").
do_pages_move tries to handle as many pages in one batch as possible so we
queue all pages with the same node target together and that corresponds to
[start, i] range which is then used to update status array.
add_page_for_migration will correctly notice the zero (resp. !present)
page and returns with EFAULT which gets written to the status. But if
this is the last page in the array we do not update start and so the last
store_status after the loop will overwrite the range of the last batch
with NUMA_NO_NODE (which corresponds to EPERM).
Fix this by simply bailing out from the last flush if the pagelist is
empty as there is clearly nothing more to do.
Link: http://lkml.kernel.org/r/20180418121255.334-1-mhocko@kernel.org
Fixes: cf5f16b23ec9 ("mm: unclutter THP migration")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root. Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.
[willy@infradead.org: fix nds32, fs/dax.c]
Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
THP migration is hacked into the generic migration with rather
surprising semantic. The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate. unmap_and_move then
fixes that up by spliting the THP into small pages while moving the head
page to the newly allocated order-0 page. Remaning pages are moved to
the LRU list by split_huge_page. The same happens if the THP allocation
fails. This is really ugly and error prone [1].
I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated. Some callers will just work
around that by retrying (e.g. memory hotplug). There are other pfn
walkers which are simply broken though. e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior. Page compaction doesn't try to migrate large
pages so it should be immune.
This patch tries to unclutter the situation by moving the special THP
handling up to the migrate_pages layer where it actually belongs. We
simply split the THP page into the existing list if unmap_and_move fails
with ENOMEM and retry. So we will _always_ migrate all THP subpages and
specific migrate_pages users do not have to deal with this case in a
special way.
[1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com
Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No allocation callback is using this argument anymore. new_page_node
used to use this parameter to convey node_id resp. migration error up
to move_pages code (do_move_page_to_node_array). The error status never
made it into the final status field and we have a better way to
communicate node id to the status field now. All other allocation
callbacks simply ignored the argument so we can drop it finally.
[mhocko@suse.com: fix migration callback]
Link: http://lkml.kernel.org/r/20180105085259.GH2801@dhcp22.suse.cz
[akpm@linux-foundation.org: fix alloc_misplaced_dst_page()]
[mhocko@kernel.org: fix build]
Link: http://lkml.kernel.org/r/20180103091134.GB11319@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20180103082555.14592-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "unclutter thp migration"
Motivation:
THP migration is hacked into the generic migration with rather
surprising semantic. The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate. unmap_and_move then
fixes that up by splitting the THP into small pages while moving the
head page to the newly allocated order-0 page. Remaining pages are
moved to the LRU list by split_huge_page. The same happens if the THP
allocation fails. This is really ugly and error prone [2].
I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated. Some callers will just work
around that by retrying (e.g. memory hotplug). There are other pfn
walkers which are simply broken though. e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior. Page compaction doesn't try to migrate large
pages so it should be immune.
The first patch reworks do_pages_move which relies on a very ugly
calling semantic when the return status is pushed to the migration path
via private pointer. It uses pre allocated fixed size batching to
achieve that. We simply cannot do the same if a THP is to be split
during the migration path which is done in the patch 3. Patch 2 is
follow up cleanup which removes the mentioned return status calling
convention ugliness.
On a side note:
There are some semantic issues I have encountered on the way when
working on patch 1 but I am not addressing them here. E.g. trying to
move THP tail pages will result in either success or EBUSY (the later
one more likely once we isolate head from the LRU list). Hugetlb
reports EACCESS on tail pages. Some errors are reported via status
parameter but migration failures are not even though the original
`reason' argument suggests there was an intention to do so. From a
quick look into git history this never worked. I have tried to keep the
semantic unchanged.
Then there is a relatively minor thing that the page isolation might
fail because of pages not being on the LRU - e.g. because they are
sitting on the per-cpu LRU caches. Easily fixable.
This patch (of 3):
do_pages_move is supposed to move user defined memory (an array of
addresses) to the user defined numa nodes (an array of nodes one for
each address). The user provided status array then contains resulting
numa node for each address or an error. The semantic of this function
is little bit confusing because only some errors are reported back.
Notably migrate_pages error is only reported via the return value. This
patch doesn't try to address these semantic nuances but rather change
the underlying implementation.
Currently we are processing user input (which can be really large) in
batches which are stored to a temporarily allocated page. Each address
is resolved to its struct page and stored to page_to_node structure
along with the requested target numa node. The array of these
structures is then conveyed down the page migration path via private
argument. new_page_node then finds the corresponding structure and
allocates the proper target page.
What is the problem with the current implementation and why to change
it? Apart from being quite ugly it also doesn't cope with unexpected
pages showing up on the migration list inside migrate_pages path. That
doesn't happen currently but the follow up patch would like to make the
thp migration code more clear and that would need to split a THP into
the list for some cases.
How does the new implementation work? Well, instead of batching into a
fixed size array we simply batch all pages that should be migrated to
the same node and isolate all of them into a linked list which doesn't
require any additional storage. This should work reasonably well
because page migration usually migrates larger ranges of memory to a
specific node. So the common case should work equally well as the
current implementation. Even if somebody constructs an input where the
target numa nodes would be interleaved we shouldn't see a large
performance impact because page migration alone doesn't really benefit
from batching. mmap_sem batching for the lookup is quite questionable
and isolate_lru_page which would benefit from batching is not using it
even in the current implementation.
Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use of pte_write(pte) is only valid for present pte, the common code
which set the migration entry can be reach for both valid present pte
and special swap entry (for device memory). Fix the code to use the
mpfn value which properly handle both cases.
On x86 this did not have any bad side effect because pte write bit is
below PAGE_BIT_GLOBAL and thus special swap entry have it set to 0 which
in turn means we were always creating read only special migration entry.
So once migration did finish we always write protected the CPU page
table entry (moreover this is only an issue when migrating from device
memory to system memory). End effect is that CPU write access would
fault again and restore write permission.
This behaviour isn't too bad; it just burns CPU cycles by forcing CPU to
take a second fault on write access. ie, double faulting the same
address. There is no corruption or incorrect states (it behaves as a
COWed page from a fork with a mapcount of 1).
Link: http://lkml.kernel.org/r/20180402023506.12180-1-jglisse@redhat.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
dirty pages
change_pte_range is called from task work context to mark PTEs for
receiving NUMA faulting hints. If the marked pages are dirty then
migration may fail. Some filesystems cannot migrate dirty pages without
blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU.
Even when they can, it can be a waste of cycles when the pages are
shared forcing higher scan rates. This patch avoids marking shared
dirty pages for hinting faults but also will skip a migration if the
page was dirtied after the scanner updated a clean page.
This is most noticeable running the NASA Parallel Benchmark when backed
by btrfs, the default root filesystem for some distributions, but also
noticeable when using XFS.
The following are results from a 4-socket machine running a 4.16-rc4
kernel with some scheduler patches that are pending for the next merge
window.
4.16.0-rc4 4.16.0-rc4
schedtip-20180309 nodirty-v1
Time cg.D 459.07 ( 0.00%) 444.21 ( 3.24%)
Time ep.D 76.96 ( 0.00%) 77.69 ( -0.95%)
Time is.D 25.55 ( 0.00%) 27.85 ( -9.00%)
Time lu.D 601.58 ( 0.00%) 596.87 ( 0.78%)
Time mg.D 107.73 ( 0.00%) 108.22 ( -0.45%)
is.D regresses slightly in terms of absolute time but note that that
particular load varies quite a bit from run to run. The more relevant
observation is the total system CPU usage.
4.16.0-rc4 4.16.0-rc4
schedtip-20180309 nodirty-v1
User 71471.91 70627.04
System 11078.96 8256.13
Elapsed 661.66 632.74
That is a substantial drop in system CPU usage and overall the workload
completes faster. The NUMA balancing statistics are also interesting
NUMA base PTE updates 111407972 139848884
NUMA huge PMD updates 206506 264869
NUMA page range updates 217139044 275461812
NUMA hint faults 4300924 3719784
NUMA hint local faults 3012539 3416618
NUMA hint local percent 70 91
NUMA pages migrated 1517487 1358420
While more PTEs are scanned due to changes in what faults are gathered,
it's clear that a far higher percentage of faults are local as the bulk
of the remote hits were dirty pages that, in this case with btrfs, had
no chance of migrating.
The following is a comparison when using XFS as that is a more realistic
filesystem choice for a data partition
4.16.0-rc4 4.16.0-rc4
schedtip-20180309 nodirty-v1r47
Time cg.D 485.28 ( 0.00%) 442.62 ( 8.79%)
Time ep.D 77.68 ( 0.00%) 77.54 ( 0.18%)
Time is.D 26.44 ( 0.00%) 24.79 ( 6.24%)
Time lu.D 597.46 ( 0.00%) 597.11 ( 0.06%)
Time mg.D 142.65 ( 0.00%) 105.83 ( 25.81%)
That is a reasonable gain on two relatively long-lived workloads. While
not presented, there is also a substantial drop in system CPu usage and
the NUMA balancing stats show similar improvements in locality as btrfs
did.
Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move compat_sys_move_pages() to mm/migrate.c and make it call a newly
introduced helper -- kernel_move_pages() -- instead of the syscall.
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
hugepage migration relies on __alloc_buddy_huge_page to get a new page.
This has 2 main disadvantages.
1) it doesn't allow to migrate any huge page if the pool is used
completely which is not an exceptional case as the pool is static and
unused memory is just wasted.
2) it leads to a weird semantic when migration between two numa nodes
might increase the pool size of the destination NUMA node while the
page is in use. The issue is caused by per NUMA node surplus pages
tracking (see free_huge_page).
Address both issues by changing the way how we allocate and account
pages allocated for migration. Those should temporal by definition. So
we mark them that way (we will abuse page flags in the 3rd page) and
update free_huge_page to free such pages to the page allocator. Page
migration path then just transfers the temporal status from the new page
to the old one which will be freed on the last reference. The global
surplus count will never change during this path but we still have to be
careful when migrating a per-node suprlus page. This is now handled in
move_hugetlb_state which is called from the migration path and it copies
the hugetlb specific page state and fixes up the accounting when needed
Rename __alloc_buddy_huge_page to __alloc_surplus_huge_page to better
reflect its purpose. The new allocation routine for the migration path
is __alloc_migrate_huge_page.
The user visible effect of this patch is that migrated pages are really
temporal and they travel between NUMA nodes as per the migration
request:
Before migration
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/free_hugepages:0
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages:1
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/surplus_hugepages:0
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/free_hugepages:0
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages:0
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/surplus_hugepages:0
After
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/free_hugepages:0
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages:0
/sys/devices/system/node/node0/hugepages/hugepages-2048kB/surplus_hugepages:0
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/free_hugepages:0
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages:1
/sys/devices/system/node/node1/hugepages/hugepages-2048kB/surplus_hugepages:0
with the previous implementation, both nodes would have nr_hugepages:1
until the page is freed.
Link: http://lkml.kernel.org/r/20180103093213.26329-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 152e93af3cfe2d29d8136cc0a02a8612507136ee.
It was a nice cleanup in theory, but as Nicolai Stange points out, we do
need to make the page dirty for the copy-on-write case even when we
didn't end up making it writable, since the dirty bit is what we use to
check that we've gone through a COW cycle.
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we make page table entries dirty all the time regardless of
access type and don't even consider if the mapping is write-protected.
The reasoning is that we don't really need dirty tracking on THP and
making the entry dirty upfront may save some time on first write to the
page.
Unfortunately, such approach may result in false-positive
can_follow_write_pmd() for huge zero page or read-only shmem file.
Let's only make page dirty only if we about to write to the page anyway
(as we do for small pages).
I've restructured the code to make entry dirty inside
maybe_p[mu]d_mkwrite(). It also takes into account if the vma is
write-protected.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is an optimization patch that only affect mmu_notifier users which
rely on the invalidate_range() callback. This patch avoids calling that
callback twice in a row from inside __mmu_notifier_invalidate_range_end
Existing pattern (before this patch):
mmu_notifier_invalidate_range_start()
pte/pmd/pud_clear_flush_notify()
mmu_notifier_invalidate_range()
mmu_notifier_invalidate_range_end()
mmu_notifier_invalidate_range()
New pattern (after this patch):
mmu_notifier_invalidate_range_start()
pte/pmd/pud_clear_flush_notify()
mmu_notifier_invalidate_range()
mmu_notifier_invalidate_range_only_end()
We call the invalidate_range callback after clearing the page table
under the page table lock and we skip the call to invalidate_range
inside the __mmu_notifier_invalidate_range_end() function.
Idea from Andrea Arcangeli
Link: http://lkml.kernel.org/r/20171017031003.7481-3-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Index was incremented before last use and thus the second array could
dereference to an invalid address (not mentioning the fact that it did
not properly clear the entry we intended to clear).
Link: http://lkml.kernel.org/r/1506973525-16491-1-git-send-email-jglisse@redhat.com
Fixes: 8315ada7f095bf ("mm/migrate: allow migrate_vma() to alloc new page on empty entry")
Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This moves all new code including new page migration helper behind kernel
Kconfig option so that there is no codee bloat for arch or user that do
not want to use HMM or any of its associated features.
arm allyesconfig (without all the patchset, then with and this patch):
text data bss dec hex filename
83721896 46511131 27582964 157815991 96814b7 ../without/vmlinux
83722364 46511131 27582964 157816459 968168b vmlinux
[jglisse@redhat.com: struct hmm is only use by HMM mirror functionality]
Link: http://lkml.kernel.org/r/20170825213133.27286-1-jglisse@redhat.com
[sfr@canb.auug.org.au: fix build (arm multi_v7_defconfig)]
Link: http://lkml.kernel.org/r/20170828181849.323ab81b@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170818032858.7447-1-jglisse@redhat.com
Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
