summaryrefslogtreecommitdiffstats
path: root/mm/kmemleak.c
AgeCommit message (Collapse)AuthorFilesLines
2018-09-04kmemleak: always register debugfs fileVincent Whitchurch1-4/+5
If kmemleak built in to the kernel, but is disabled by default, the debugfs file is never registered. Because of this, it is not possible to find out if the kernel is built with kmemleak support by checking for the presence of this file. To allow this, always register the file. After this patch, if the file doesn't exist, kmemleak is not available in the kernel. If writing "scan" or any other value than "clear" to this file results in EBUSY, then kmemleak is available but is disabled by default and can be activated via the kernel command line. Catalin: "that's also consistent with a late disabling of kmemleak when the debugfs entry sticks around." Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm: kernel-doc: add missing parameter descriptionsMike Rapoport1-0/+10
Link: http://lkml.kernel.org/r/1519585191-10180-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm/kmemleak.c: make kmemleak_boot_config() __initDou Liyang1-1/+1
The early_param() is only called during kernel initialization, So Linux marks the functions of it with __init macro to save memory. But it forgot to mark the kmemleak_boot_config(). So, Make it __init as well. Link: http://lkml.kernel.org/r/20180117034720.26897-1-douly.fnst@cn.fujitsu.com Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/kmemleak.c: wait for scan completion before disabling freeVinayak Menon1-5/+7
A crash is observed when kmemleak_scan accesses the object->pointer, likely due to the following race. TASK A TASK B TASK C kmemleak_write (with "scan" and NOT "scan=on") kmemleak_scan() create_object kmem_cache_alloc fails kmemleak_disable kmemleak_do_cleanup kmemleak_free_enabled = 0 kfree kmemleak_free bails out (kmemleak_free_enabled is 0) slub frees object->pointer update_checksum crash - object->pointer freed (DEBUG_PAGEALLOC) kmemleak_do_cleanup waits for the scan thread to complete, but not for direct call to kmemleak_scan via kmemleak_write. So add a wait for kmemleak_scan completion before disabling kmemleak_free, and while at it fix the comment on stop_scan_thread. [vinmenon@codeaurora.org: fix stop_scan_thread comment] Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31mm: kmemleak: remove unused hardirq.hYang Shi1-1/+0
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by kmemleak at all. So, remove the unused hardirq.h. Link: http://lkml.kernel.org/r/1510959741-31109-1-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-13kmemleak: allow to coexist with fault injectionDmitry Vyukov1-1/+1
kmemleak does one slab allocation per user allocation. So if slab fault injection is enabled to any degree, kmemleak instantly fails to allocate and turns itself off. However, it's useful to use kmemleak with fault injection to find leaks on error paths. On the other hand, checking kmemleak itself is not so useful because (1) it's a debugging tool and (2) it has a very regular allocation pattern (basically a single allocation site, so it either works or not). Turn off fault injection for kmemleak allocations. Link: http://lkml.kernel.org/r/20180109192243.19316-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-14mm/kmemleak.c: make cond_resched() rate-limiting more efficientAndrew Morton1-1/+1
Commit bde5f6bc68db ("kmemleak: add scheduling point to kmemleak_scan()") tries to rate-limit the frequency of cond_resched() calls, but does it in a way which might incur an expensive division operation in the inner loop. Simplify this. Fixes: bde5f6bc68db5 ("kmemleak: add scheduling point to kmemleak_scan()") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29kmemleak: add scheduling point to kmemleak_scan()Yisheng Xie1-0/+2
kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemcheck: remove annotationsLevin, Alexander (Sasha Levin)1-9/+0
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemleak: change /sys/kernel/debug/kmemleak permissions from 0444 to 0644Konstantin Khlebnikov1-1/+1
Kmemleak can be tweaked at runtime by writing commands into debugfs file. Root can use it anyway, but without the write-bit this interface isn't obvious. Link: http://lkml.kernel.org/r/150728996582.744328.11541332857988399411.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objectsCatalin Marinas1-4/+89
Kmemleak requires that vmalloc'ed objects have a minimum reference count of 2: one in the corresponding vm_struct object and the other owned by the vmalloc() caller. There are cases, however, where the original vmalloc() returned pointer is lost and, instead, a pointer to vm_struct is stored (see free_thread_stack()). Kmemleak currently reports such objects as leaks. This patch adds support for treating any surplus references to an object as additional references to a specified object. It introduces the kmemleak_vmalloc() API function which takes a vm_struct pointer and sets its surplus reference passing to the actual vmalloc() returned pointer. The __vmalloc_node_range() calling site has been modified accordingly. Link: http://lkml.kernel.org/r/1495726937-23557-4-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: kmemleak: factor object reference updating out of scan_block()Catalin Marinas1-18/+25
scan_block() updates the number of references (pointers) to objects, adding them to the gray_list when object->min_count is reached. The patch factors out this functionality into a separate update_refs() function. Link: http://lkml.kernel.org/r/1495726937-23557-3-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: kmemleak: slightly reduce the size of some structures on 64-bit ↵Catalin Marinas1-3/+3
architectures Change the kmemleak_object.flags type to unsigned int and moves the early_log.min_count (int) near early_log.op_type (int) to slightly reduce the size of these structures on 64-bit architectures. Link: http://lkml.kernel.org/r/1495726937-23557-2-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-31mm: fix section name for .data..ro_after_initKees Cook1-1/+1
A section name for .data..ro_after_init was added by both: commit d07a980c1b8d ("s390: add proper __ro_after_init support") and commit d7c19b066dcf ("mm: kmemleak: scan .data.ro_after_init") The latter adds incorrect wrapping around the existing s390 section, and came later. I'd prefer the s390 naming, so this moves the s390-specific name up to the asm-generic/sections.h and renames the section as used by kmemleak (and in the future, kernel/extable.c). Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390 parts] Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Eddie Kovsky <ewk@edkovsky.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-12kmemleak: fix reference to DocumentationAndreas Platschek1-1/+1
Documentation/kmemleak.txt was moved to Documentation/dev-tools/kmemleak.rst, this fixes the reference to the new location. Link: http://lkml.kernel.org/r/1476544946-18804-1-git-send-email-andreas.platschek@opentech.at Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11mm: kmemleak: scan .data.ro_after_initJakub Kicinski1-0/+1
Limit the number of kmemleak false positives by including .data.ro_after_init in memory scanning. To achieve this we need to add symbols for start and end of the section to the linker scripts. The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark families as __ro_after_init"). Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27mm: kmemleak: ensure that the task stack is not freed during scanningCatalin Marinas1-2/+5
Commit 68f24b08ee89 ("sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK") may cause the task->stack to be freed during kmemleak_scan() execution, leading to either a NULL pointer fault (if task->stack is NULL) or kmemleak accessing already freed memory. This patch uses the new try_get_task_stack() API to ensure that the task stack is not freed during kmemleak stack scanning. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=173901. Fixes: 68f24b08ee89 ("sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK") Link: http://lkml.kernel.org/r/1476266223-14325-1-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: CAI Qian <caiqian@redhat.com> Tested-by: CAI Qian <caiqian@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: CAI Qian <caiqian@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mappingCatalin Marinas1-0/+47
Some of the kmemleak_*() callbacks in memblock, bootmem, CMA convert a physical address to a virtual one using __va(). However, such physical addresses may sometimes be located in highmem and using __va() is incorrect, leading to inconsistent object tracking in kmemleak. The following functions have been added to the kmemleak API and they take a physical address as the object pointer. They only perform the corresponding action if the address has a lowmem mapping: kmemleak_alloc_phys kmemleak_free_part_phys kmemleak_not_leak_phys kmemleak_ignore_phys The affected calling places have been updated to use the new kmemleak API. Link: http://lkml.kernel.org/r/1471531432-16503-1-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28kmemleak: don't hang if user disables scanning earlyVegard Nossum1-1/+3
If the user tries to disable automatic scanning early in the boot process using e.g.: echo scan=off > /sys/kernel/debug/kmemleak then this command will hang until SECS_FIRST_SCAN (= 60) seconds have elapsed, even though the system is fully initialised. We can fix this using interruptible sleep and checking if we're supposed to stop whenever we wake up (like the rest of the code does). Link: http://lkml.kernel.org/r/1468835005-2873-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24mm: prevent KASAN false positives in kmemleakDmitry Vyukov1-0/+2
When kmemleak dumps contents of leaked objects it reads whole objects regardless of user-requested size. This upsets KASAN. Disable KASAN checks around object dump. Link: http://lkml.kernel.org/r/1466617631-68387-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: coalesce split stringsJoe Perches1-10/+8
Kernel style prefers a single string over split strings when the string is 'user-visible'. Miscellanea: - Add a missing newline - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: convert pr_warning to pr_warnJoe Perches1-7/+7
There are a mixture of pr_warning and pr_warn uses in mm. Use pr_warn consistently. Miscellanea: - Coalesce formats - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14Revert "gfp: add __GFP_NOACCOUNT"Vladimir Davydov1-2/+1
This reverts commit 8f4fc071b192 ("gfp: add __GFP_NOACCOUNT"). Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So it was decided to switch to the white-list policy. This patch reverts bits introducing the black-list policy. The white-list policy will be introduced later in the series. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm/kmemleak.c: remove unneeded initialization of object to NULLAlexey Klimov1-1/+1
Few lines below object is reinitialized by lookup_object() so we don't need to init it by NULL in the beginning of find_and_get_object(). Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10kmemleak: use seq_hex_dump() to dump buffersAndy Shevchenko1-15/+6
Instead of custom approach let's use recently introduced seq_hex_dump() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Cc: Tadeusz Struk <tadeusz.struk@intel.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08kmemleak: record accurate early log buffer count and report when exceededWang Kai1-1/+2
In log_early function, crt_early_log should also count once when 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported count from kmemleak_init is one less than 'actual number'. Then, in kmemleak_init, if early_log buffer size equal actual number, kmemleak will init sucessful, so change warning condition to 'crt_early_log > ARRAY_SIZE(early_log)'. Signed-off-by: Wang Kai <morgan.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc()Larry Finger1-4/+5
Beginning at commit d52d3997f843 ("ipv6: Create percpu rt6_info"), the following INFO splat is logged: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-next-20150612 #1 Not tainted ------------------------------- kernel/sched/core.c:7318 Illegal context switch in RCU-bh read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by systemd/1: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815f0c8f>] rtnetlink_rcv+0x1f/0x40 #1: (rcu_read_lock_bh){......}, at: [<ffffffff816a34e2>] ipv6_add_addr+0x62/0x540 #2: (addrconf_hash_lock){+...+.}, at: [<ffffffff816a3604>] ipv6_add_addr+0x184/0x540 stack backtrace: CPU: 0 PID: 1 Comm: systemd Not tainted 4.1.0-rc7-next-20150612 #1 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 Call Trace: dump_stack+0x4c/0x6e lockdep_rcu_suspicious+0xe7/0x120 ___might_sleep+0x1d5/0x1f0 __might_sleep+0x4d/0x90 kmem_cache_alloc+0x47/0x250 create_object+0x39/0x2e0 kmemleak_alloc_percpu+0x61/0xe0 pcpu_alloc+0x370/0x630 Additional backtrace lines are truncated. In addition, the above splat is followed by several "BUG: sleeping function called from invalid context at mm/slub.c:1268" outputs. As suggested by Martin KaFai Lau, these are the clue to the fix. Routine kmemleak_alloc_percpu() always uses GFP_KERNEL for its allocations, whereas it should follow the gfp from its callers. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: optimise kmemleak_lock acquiring during kmemleak_scanCatalin Marinas1-34/+56
The kmemleak memory scanning uses finer grained object->lock spinlocks primarily to avoid races with the memory block freeing. However, the pointer lookup in the rb tree requires the kmemleak_lock to be held. This is currently done in the find_and_get_object() function for each pointer-like location read during scanning. While this allows a low latency on kmemleak_*() callbacks on other CPUs, the memory scanning is slower. This patch moves the kmemleak_lock outside the scan_block() loop, acquiring/releasing it only once per scanned memory block. The allow_resched logic is moved outside scan_block() and a new scan_large_block() function is implemented which splits large blocks in MAX_SCAN_SIZE chunks with cond_resched() calls in-between. A redundant (object->flags & OBJECT_NO_SCAN) check is also removed from scan_object(). With this patch, the kmemleak scanning performance is significantly improved: at least 50% with lock debugging disabled and over an order of magnitude with lock proving enabled (on an arm64 system). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: avoid deadlock on the kmemleak object insertion error pathCatalin Marinas1-4/+11
While very unlikely (usually kmemleak or sl*b bug), the create_object() function in mm/kmemleak.c may fail to insert a newly allocated object into the rb tree. When this happens, kmemleak disables itself and prints additional information about the object already found in the rb tree. Such printing is done with the parent->lock acquired, however the kmemleak_lock is already held. This is a potential race with the scanning thread which acquires object->lock and kmemleak_lock in a This patch removes the locking around the 'parent' object information printing. Such object cannot be freed or removed from object_tree_root and object_list since kmemleak_lock is already held. There is a very small risk that some of the object data is being modified on another CPU but the only downside is inconsistent information printing. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: do not acquire scan_mutex in kmemleak_do_cleanup()Catalin Marinas1-2/+0
The kmemleak_do_cleanup() work thread already waits for the kmemleak_scan thread to finish via kthread_stop(). Waiting in kthread_stop() while scan_mutex is held may lead to deadlock if kmemleak_scan_thread() also waits to acquire for scan_mutex. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: fix delete_object_*() race when called on the same memory blockCatalin Marinas1-13/+26
Calling delete_object_*() on the same pointer is not a standard use case (unless there is a bug in the code calling kmemleak_free()). However, during kmemleak disabling (error or user triggered via /sys), there is a potential race between kmemleak_free() calls on a CPU and __kmemleak_do_cleanup() on a different CPU. The current delete_object_*() implementation first performs a look-up holding kmemleak_lock, increments the object->use_count and then re-acquires kmemleak_lock to remove the object from object_tree_root and object_list. This patch simplifies the delete_object_*() mechanism to both look up and remove an object from the object_tree_root and object_list atomically (guarded by kmemleak_lock). This allows safe concurrent calls to delete_object_*() on the same pointer without additional locking for synchronising the kmemleak_free_enabled flag. A side effect is a slight improvement in the delete_object_*() performance by avoiding acquiring kmemleak_lock twice and incrementing/decrementing object->use_count. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: allow safe memory scanning during kmemleak disablingCatalin Marinas1-3/+16
The kmemleak scanning thread can run for minutes. Callbacks like kmemleak_free() are allowed during this time, the race being taken care of by the object->lock spinlock. Such lock also prevents a memory block from being freed or unmapped while it is being scanned by blocking the kmemleak_free() -> ... -> __delete_object() function until the lock is released in scan_object(). When a kmemleak error occurs (e.g. it fails to allocate its metadata), kmemleak_enabled is set and __delete_object() is no longer called on freed objects. If kmemleak_scan is running at the same time, kmemleak_free() no longer waits for the object scanning to complete, allowing the corresponding memory block to be freed or unmapped (in the case of vfree()). This leads to kmemleak_scan potentially triggering a page fault. This patch separates the kmemleak_free() enabling/disabling from the overall kmemleak_enabled nob so that we can defer the disabling of the object freeing tracking until the scanning thread completed. The kmemleak_free_part() is deliberately ignored by this patch since this is only called during boot before the scanning thread started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org> Tested-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-14gfp: add __GFP_NOACCOUNTVladimir Davydov1-1/+2
Not all kmem allocations should be accounted to memcg. The following patch gives an example when accounting of a certain type of allocations to memcg can effectively result in a memory leak. This patch adds the __GFP_NOACCOUNT flag which if passed to kmalloc and friends will force the allocation to go through the root cgroup. It will be used by the next patch. Note, since in case of kmemleak enabled each kmalloc implies yet another allocation from the kmemleak_object cache, we add __GFP_NOACCOUNT to gfp_kmemleak_mask. Alternatively, we could introduce a per kmem cache flag disabling accounting for all allocations of a particular kind, but (a) we would not be able to bypass accounting for kmalloc then and (b) a kmem cache with this flag set could not be merged with a kmem cache without this flag, which would increase the number of global caches and therefore fragmentation even if the memory cgroup controller is not used. Despite its generic name, currently __GFP_NOACCOUNT disables accounting only for kmem allocations while user page allocations are always charged. To catch abusing of this flag, a warning is issued on an attempt of passing it to mem_cgroup_try_charge. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Greg Thelen <gthelen@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> [4.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13kmemleak: disable kasan instrumentation for kmemleakAndrey Ryabinin1-0/+6
kmalloc internally round up allocation size, and kmemleak uses rounded up size as object's size. This makes kasan to complain while kmemleak scans memory or calculates of object's checksum. The simplest solution here is to disable kasan. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06mm: introduce kmemleak_update_trace()Catalin Marinas1-0/+34
The memory allocation stack trace is not always useful for debugging a memory leak (e.g. radix_tree_preload). This function, when called, updates the stack trace for an already allocated object. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06mm/kmemleak.c: use %u to print ->checksumJianpeng Ma1-1/+1
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mem-hotplug: implement get/put_online_memsVladimir Davydov1-2/+2
kmem_cache_{create,destroy,shrink} need to get a stable value of cpu/node online mask, because they init/destroy/access per-cpu/node kmem_cache parts, which can be allocated or destroyed on cpu/mem hotplug. To protect against cpu hotplug, these functions use {get,put}_online_cpus. However, they do nothing to synchronize with memory hotplug - taking the slab_mutex does not eliminate the possibility of race as described in patch 2. What we need there is something like get_online_cpus, but for memory. We already have lock_memory_hotplug, which serves for the purpose, but it's a bit of a hammer right now, because it's backed by a mutex. As a result, it imposes some limitations to locking order, which are not desirable, and can't be used just like get_online_cpus. That's why in patch 1 I substitute it with get/put_online_mems, which work exactly like get/put_online_cpus except they block not cpu, but memory hotplug. [ v1 can be found at https://lkml.org/lkml/2014/4/6/68. I NAK'ed it by myself, because it used an rw semaphore for get/put_online_mems, making them dead lock prune. ] This patch (of 2): {un}lock_memory_hotplug, which is used to synchronize against memory hotplug, is currently backed by a mutex, which makes it a bit of a hammer - threads that only want to get a stable value of online nodes mask won't be able to proceed concurrently. Also, it imposes some strong locking ordering rules on it, which narrows down the set of its usage scenarios. This patch introduces get/put_online_mems, which are the same as get/put_online_cpus, but for memory hotplug, i.e. executing a code inside a get/put_online_mems section will guarantee a stable value of online nodes, present pages, etc. lock_memory_hotplug()/unlock_memory_hotplug() are removed altogether. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-11mm: postpone the disabling of kmemleak early loggingCatalin Marinas1-2/+2
Commit 8910ae896c8c ("kmemleak: change some global variables to int"), in addition to the atomic -> int conversion, moved the disabling of kmemleak_early_log to the beginning of the kmemleak_init() function, before the full kmemleak tracing is actually enabled. In this small window, kmem_cache_create() is called by kmemleak which triggers additional memory allocation that are not traced. This patch restores the original logic with kmemleak_early_log disabling when kmemleak is fully functional. Fixes: 8910ae896c8c (kmemleak: change some global variables to int) Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kmemleak: change some global variables to intLi Zefan1-40/+40
They don't have to be atomic_t, because they are simple boolean toggles. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kmemleak: remove redundant codeLi Zefan1-6/+1
Remove kmemleak_padding() and kmemleak_release(). Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kmemleak: allow freeing internal objects after kmemleak was disabledLi Zefan1-14/+32
Currently if kmemleak is disabled, the kmemleak objects can never be freed, no matter if it's disabled by a user or due to fatal errors. Those objects can be a big waste of memory. OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 1200264 1197433 99% 0.30K 46164 26 369312K kmemleak_object With this patch, after kmemleak was disabled you can reclaim memory with: # echo clear > /sys/kernel/debug/kmemleak Also inform users about this with a printk. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kmemleak: free internal objects only if there're no leaks to be reportedLi Zefan1-4/+9
Currently if you stop kmemleak thread before disabling kmemleak, kmemleak objects will be freed and so you won't be able to check previously reported leaks. With this patch, kmemleak objects won't be freed if there're leaks that can be reported. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm: kmemleak: avoid false negatives on vmalloc'ed objectsCatalin Marinas1-1/+3
Commit 248ac0e1943a ("mm/vmalloc: remove guard page from between vmap blocks") had the side effect of making vmap_area.va_end member point to the next vmap_area.va_start. This was creating an artificial reference to vmalloc'ed objects and kmemleak was rarely reporting vmalloc() leaks. This patch marks the vmap_area containing pointers explicitly and reduces the min ref_count to 2 as vm_struct still contains a reference to the vmalloc'ed object. The kmemleak add_scan_area() function has been improved to allow a SIZE_MAX argument covering the rest of the object (for simpler calling sites). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11mm: replace strict_strtoul() with kstrtoul()Jingoo Han1-1/+1
The use of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin1-5/+4
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23mm: add & use zone_end_pfn() and zone_spans_pfn()Cody P Schafer1-3/+2
Add 2 helpers (zone_end_pfn() and zone_spans_pfn()) to reduce code duplication. This also switches to using them in compaction (where an additional variable needed to be renamed), page_alloc, vmstat, memory_hotplug, and kmemleak. Note that in compaction.c I avoid calling zone_end_pfn() repeatedly because I expect at some point the sycronization issues with start_pfn & spanned_pages will need fixing, either by actually using the seqlock or clever memory barrier usage. Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: David Hansen <dave@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18mm/kmemleak.c: remove obsolete simple_strtoulAbhijit Pawar1-1/+2
Replace the obsolete simple_strtoul() with kstrtoul(). Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>