summaryrefslogtreecommitdiffstats
path: root/mm/kmemleak.c
AgeCommit message (Collapse)AuthorFilesLines
2019-08-03Revert "kmemleak: allow to coexist with fault injection"Yang Shi1-1/+1
When running ltp's oom test with kmemleak enabled, the below warning was triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is passed in: WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50 Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50 ... kmemleak_alloc+0x4e/0xb0 kmem_cache_alloc+0x2a7/0x3e0 mempool_alloc_slab+0x2d/0x40 mempool_alloc+0x118/0x2b0 bio_alloc_bioset+0x19d/0x350 get_swap_bio+0x80/0x230 __swap_writepage+0x5ff/0xb20 The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak has __GFP_NOFAIL set all the time due to d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection"). But, it doesn't make any sense to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same time. According to the discussion on the mailing list, the commit should be reverted for short term solution. Catalin Marinas would follow up with a better solution for longer term. The failure rate of kmemleak metadata allocation may increase in some circumstances, but this should be expected side effect. Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com Fixes: d9570ee3bd1d4f2 ("kmemleak: allow to coexist with fault injection") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds1-6/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-12mm/kmemleak.c: change error at _write when kmemleak is disabledAndré Almeida1-1/+1
According to POSIX, EBUSY means that the "device or resource is busy", and this can lead to people thinking that the file `/sys/kernel/debug/kmemleak/` is somehow locked or being used by other process. Change this error code to a more appropriate one. Link: http://lkml.kernel.org/r/20190612155231.19448-1-andrealmeid@collabora.com Signed-off-by: André Almeida <andrealmeid@collabora.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-12mm/kmemleak.c: fix check for softirq contextDmitry Vyukov1-1/+1
in_softirq() is a wrong predicate to check if we are in a softirq context. It also returns true if we have BH disabled, so objects are falsely stamped with "softirq" comm. The correct predicate is in_serving_softirq(). If user does cat from /sys/kernel/debug/kmemleak previously they would see this, which is clearly wrong, this is system call context (see the comm): unreferenced object 0xffff88805bd661c0 (size 64): comm "softirq", pid 0, jiffies 4294942959 (age 12.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<0000000007dcb30c>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<0000000007dcb30c>] slab_post_alloc_hook mm/slab.h:439 [inline] [<0000000007dcb30c>] slab_alloc mm/slab.c:3326 [inline] [<0000000007dcb30c>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<00000000969722b7>] kmalloc include/linux/slab.h:547 [inline] [<00000000969722b7>] kzalloc include/linux/slab.h:742 [inline] [<00000000969722b7>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<00000000969722b7>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<00000000a4134b5f>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<00000000d20248ad>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957 [<000000003d367be7>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<000000003c7c76af>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<000000000c1aeb23>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130 [<000000000157b92b>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078 [<00000000a9f3d058>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000a9f3d058>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000a9f3d058>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<000000001b8da885>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301 [<00000000ba770c62>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 now they will see this: unreferenced object 0xffff88805413c800 (size 64): comm "syz-executor.4", pid 8960, jiffies 4294994003 (age 14.350s) hex dump (first 32 bytes): 00 7a 8a 57 80 88 ff ff e0 00 00 01 00 00 00 00 .z.W............ 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ backtrace: [<00000000c5d3be64>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline] [<00000000c5d3be64>] slab_post_alloc_hook mm/slab.h:439 [inline] [<00000000c5d3be64>] slab_alloc mm/slab.c:3326 [inline] [<00000000c5d3be64>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553 [<0000000023865be2>] kmalloc include/linux/slab.h:547 [inline] [<0000000023865be2>] kzalloc include/linux/slab.h:742 [inline] [<0000000023865be2>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline] [<0000000023865be2>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085 [<000000003029a9d4>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475 [<00000000ccd0a87c>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957 [<00000000a85a3785>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246 [<00000000ec13c18d>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616 [<0000000052d748e3>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130 [<00000000512f1014>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078 [<00000000181758bc>] __do_sys_setsockopt net/socket.c:2089 [inline] [<00000000181758bc>] __se_sys_setsockopt net/socket.c:2086 [inline] [<00000000181758bc>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086 [<00000000d4b73623>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301 [<00000000c1098bec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: http://lkml.kernel.org/r/20190517171507.96046-1-dvyukov@gmail.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner1-14/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03mm: kmemleak: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-6/+1
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: linux-mm@kvack.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06Merge branch 'core-stacktrace-for-linus' of ↵Linus Torvalds1-21/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull stack trace updates from Ingo Molnar: "So Thomas looked at the stacktrace code recently and noticed a few weirdnesses, and we all know how such stories of crummy kernel code meeting German engineering perfection end: a 45-patch series to clean it all up! :-) Here's the changes in Thomas's words: 'Struct stack_trace is a sinkhole for input and output parameters which is largely pointless for most usage sites. In fact if embedded into other data structures it creates indirections and extra storage overhead for no benefit. Looking at all usage sites makes it clear that they just require an interface which is based on a storage array. That array is either on stack, global or embedded into some other data structure. Some of the stack depot usage sites are outright wrong, but fortunately the wrongness just causes more stack being used for nothing and does not have functional impact. Another oddity is the inconsistent termination of the stack trace with ULONG_MAX. It's pointless as the number of entries is what determines the length of the stored trace. In fact quite some call sites remove the ULONG_MAX marker afterwards with or without nasty comments about it. Not all architectures do that and those which do, do it inconsistenly either conditional on nr_entries == 0 or unconditionally. The following series cleans that up by: 1) Removing the ULONG_MAX termination in the architecture code 2) Removing the ULONG_MAX fixups at the call sites 3) Providing plain storage array based interfaces for stacktrace and stackdepot. 4) Cleaning up the mess at the callsites including some related cleanups. 5) Removing the struct stack_trace based interfaces This is not changing the struct stack_trace interfaces at the architecture level, but it removes the exposure to the generic code'" * 'core-stacktrace-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) x86/stacktrace: Use common infrastructure stacktrace: Provide common infrastructure lib/stackdepot: Remove obsolete functions stacktrace: Remove obsolete functions livepatch: Simplify stack trace retrieval tracing: Remove the last struct stack_trace usage tracing: Simplify stack trace retrieval tracing: Make ftrace_trace_userstack() static and conditional tracing: Use percpu stack trace buffer more intelligently tracing: Simplify stacktrace retrieval in histograms lockdep: Simplify stack trace handling lockdep: Remove save argument from check_prev_add() lockdep: Remove unused trace argument from print_circular_bug() drm: Simplify stacktrace handling dm persistent data: Simplify stack trace handling dm bufio: Simplify stack trace retrieval btrfs: ref-verify: Simplify stack trace retrieval dma/debug: Simplify stracktrace retrieval fault-inject: Simplify stacktrace retrieval mm/page_owner: Simplify stack trace handling ...
2019-04-29mm/kmemleak: Simplify stacktrace handlingThomas Gleixner1-21/+3
Replace the indirection through struct stack_trace by using the storage array based interfaces. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: linux-mm@kvack.org Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Potapenko <glider@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: linux-btrfs@vger.kernel.org Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@redhat.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: intel-gfx@lists.freedesktop.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-arch@vger.kernel.org Link: https://lkml.kernel.org/r/20190425094801.863716911@linutronix.de
2019-04-19mm/kmemleak.c: fix unused-function warningArnd Bergmann1-0/+2
The only references outside of the #ifdef have been removed, so now we get a warning in non-SMP configurations: mm/kmemleak.c:1404:13: error: unused function 'scan_large_block' [-Werror,-Wunused-function] Add a new #ifdef around it. Link: http://lkml.kernel.org/r/20190416123148.3502045-1-arnd@arndb.de Fixes: 298a32b13208 ("kmemleak: powerpc: skip scanning holes in the .bss section") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05kmemleak: powerpc: skip scanning holes in the .bss sectionCatalin Marinas1-5/+11
Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds kvm_tmp[] into the .bss section and then free the rest of unused spaces back to the page allocator. kernel_init kvm_guest_init kvm_free_tmp free_reserved_area free_unref_page free_unref_page_prepare With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the result, kmemleak scan will trigger a panic when it scans the .bss section with unmapped pages. This patch creates dedicated kmemleak objects for the .data, .bss and potentially .data..ro_after_init sections to allow partial freeing via the kmemleak_free_part() in the powerpc kvm_free_tmp() function. Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Qian Cai <cai@lca.pw> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Qian Cai <cai@lca.pw> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Avi Kivity <avi@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-21kmemleak: account for tagged pointers when calculating pointer rangeAndrey Konovalov1-3/+7
kmemleak keeps two global variables, min_addr and max_addr, which store the range of valid (encountered by kmemleak) pointer values, which it later uses to speed up pointer lookup when scanning blocks. With tagged pointers this range will get bigger than it needs to be. This patch makes kmemleak untag pointers before saving them to min_addr and max_addr and when performing a lookup. Link: http://lkml.kernel.org/r/16e887d442986ab87fe87a755815ad92fa431a5f.1550066133.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Qian Cai <cai@lca.pw> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgeniy Stepanov <eugenis@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28kmemleak: add config to select auto scanSri Krishna chowdary1-4/+6
Kmemleak scan can be cpu intensive and can stall user tasks at times. To prevent this, add config DEBUG_KMEMLEAK_AUTO_SCAN to enable/disable auto scan on boot up. Also protect first_run with DEBUG_KMEMLEAK_AUTO_SCAN as this is meant for only first automatic scan. Link: http://lkml.kernel.org/r/1540231723-7087-1-git-send-email-prpatel@nvidia.com Signed-off-by: Sri Krishna chowdary <schowdary@nvidia.com> Signed-off-by: Sachin Nikam <snikam@nvidia.com> Signed-off-by: Prateek <prpatel@nvidia.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28mm, kmemleak: little optimization while scanningOscar Salvador1-3/+6
kmemleak_scan() goes through all online nodes and tries to scan all used pages. We can do better and use pfn_to_online_page(), so in case we have CONFIG_MEMORY_HOTPLUG, offlined pages will be skiped automatically. For boxes where CONFIG_MEMORY_HOTPLUG is not present, pfn_to_online_page() will fallback to pfn_valid(). Another little optimization is to check if the page belongs to the node we are currently checking, so in case we have nodes interleaved we will not check the same pfn multiple times. I ran some tests: Add some memory to node1 and node2 making it interleaved: (qemu) object_add memory-backend-ram,id=ram0,size=1G (qemu) device_add pc-dimm,id=dimm0,memdev=ram0,node=1 (qemu) object_add memory-backend-ram,id=ram1,size=1G (qemu) device_add pc-dimm,id=dimm1,memdev=ram1,node=2 (qemu) object_add memory-backend-ram,id=ram2,size=1G (qemu) device_add pc-dimm,id=dimm2,memdev=ram2,node=1 Then, we offline that memory: # for i in {32..39} ; do echo "offline" > /sys/devices/system/node/node1/memory$i/state;done # for i in {48..55} ; do echo "offline" > /sys/devices/system/node/node1/memory$i/state;don # for i in {40..47} ; do echo "offline" > /sys/devices/system/node/node2/memory$i/state;done And we run kmemleak_scan: # echo "scan" > /sys/kernel/debug/kmemleak before the patch: kmemleak: time spend: 41596 us after the patch: kmemleak: time spend: 34899 us [akpm@linux-foundation.org: remove stray newline, per Oscar] Link: http://lkml.kernel.org/r/20181206131918.25099-1-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-1/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26kmemleak: add module param to print warnings to dmesgVincent Whitchurch1-7/+35
Currently, kmemleak only prints the number of suspected leaks to dmesg but requires the user to read a debugfs file to get the actual stack traces of the objects' allocation points. Add a module option to print the full object information to dmesg too. It can be enabled with kmemleak.verbose=1 on the kernel command line, or "echo 1 > /sys/module/kmemleak/parameters/verbose": This allows easier integration of kmemleak into test systems: We have automated test infrastructure to test our Linux systems. With this option, running our tests with kmemleak is as simple as enabling kmemleak and passing this command line option; the test infrastructure knows how to save kernel logs, which will now include kmemleak reports. Without this option, the test infrastructure needs to be specifically taught to read out the kmemleak debugfs file. Removing this need for special handling makes kmemleak more similar to other kernel debug options (slab debugging, debug objects, etc). Link: http://lkml.kernel.org/r/20180903144046.21023-1-vincent.whitchurch@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-09-04kmemleak: always register debugfs fileVincent Whitchurch1-4/+5
If kmemleak built in to the kernel, but is disabled by default, the debugfs file is never registered. Because of this, it is not possible to find out if the kernel is built with kmemleak support by checking for the presence of this file. To allow this, always register the file. After this patch, if the file doesn't exist, kmemleak is not available in the kernel. If writing "scan" or any other value than "clear" to this file results in EBUSY, then kmemleak is available but is disabled by default and can be activated via the kernel command line. Catalin: "that's also consistent with a late disabling of kmemleak when the debugfs entry sticks around." Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm: kernel-doc: add missing parameter descriptionsMike Rapoport1-0/+10
Link: http://lkml.kernel.org/r/1519585191-10180-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05mm/kmemleak.c: make kmemleak_boot_config() __initDou Liyang1-1/+1
The early_param() is only called during kernel initialization, So Linux marks the functions of it with __init macro to save memory. But it forgot to mark the kmemleak_boot_config(). So, Make it __init as well. Link: http://lkml.kernel.org/r/20180117034720.26897-1-douly.fnst@cn.fujitsu.com Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-03-28mm/kmemleak.c: wait for scan completion before disabling freeVinayak Menon1-5/+7
A crash is observed when kmemleak_scan accesses the object->pointer, likely due to the following race. TASK A TASK B TASK C kmemleak_write (with "scan" and NOT "scan=on") kmemleak_scan() create_object kmem_cache_alloc fails kmemleak_disable kmemleak_do_cleanup kmemleak_free_enabled = 0 kfree kmemleak_free bails out (kmemleak_free_enabled is 0) slub frees object->pointer update_checksum crash - object->pointer freed (DEBUG_PAGEALLOC) kmemleak_do_cleanup waits for the scan thread to complete, but not for direct call to kmemleak_scan via kmemleak_write. So add a wait for kmemleak_scan completion before disabling kmemleak_free, and while at it fix the comment on stop_scan_thread. [vinmenon@codeaurora.org: fix stop_scan_thread comment] Link: http://lkml.kernel.org/r/1522219972-22809-1-git-send-email-vinmenon@codeaurora.org Link: http://lkml.kernel.org/r/1522063429-18992-1-git-send-email-vinmenon@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31mm: kmemleak: remove unused hardirq.hYang Shi1-1/+0
Preempt counter APIs have been split out, currently, hardirq.h just includes irq_enter/exit APIs which are not used by kmemleak at all. So, remove the unused hardirq.h. Link: http://lkml.kernel.org/r/1510959741-31109-1-git-send-email-yang.s@alibaba-inc.com Signed-off-by: Yang Shi <yang.s@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-13kmemleak: allow to coexist with fault injectionDmitry Vyukov1-1/+1
kmemleak does one slab allocation per user allocation. So if slab fault injection is enabled to any degree, kmemleak instantly fails to allocate and turns itself off. However, it's useful to use kmemleak with fault injection to find leaks on error paths. On the other hand, checking kmemleak itself is not so useful because (1) it's a debugging tool and (2) it has a very regular allocation pattern (basically a single allocation site, so it either works or not). Turn off fault injection for kmemleak allocations. Link: http://lkml.kernel.org/r/20180109192243.19316-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-14mm/kmemleak.c: make cond_resched() rate-limiting more efficientAndrew Morton1-1/+1
Commit bde5f6bc68db ("kmemleak: add scheduling point to kmemleak_scan()") tries to rate-limit the frequency of cond_resched() calls, but does it in a way which might incur an expensive division operation in the inner loop. Simplify this. Fixes: bde5f6bc68db5 ("kmemleak: add scheduling point to kmemleak_scan()") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Yisheng Xie <xieyisheng1@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29kmemleak: add scheduling point to kmemleak_scan()Yisheng Xie1-0/+2
kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.com Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemcheck: remove annotationsLevin, Alexander (Sasha Levin)1-9/+0
Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.com Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tim Hansen <devtimhansen@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-15kmemleak: change /sys/kernel/debug/kmemleak permissions from 0444 to 0644Konstantin Khlebnikov1-1/+1
Kmemleak can be tweaked at runtime by writing commands into debugfs file. Root can use it anyway, but without the write-bit this interface isn't obvious. Link: http://lkml.kernel.org/r/150728996582.744328.11541332857988399411.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: kmemleak: treat vm_struct as alternative reference to vmalloc'ed objectsCatalin Marinas1-4/+89
Kmemleak requires that vmalloc'ed objects have a minimum reference count of 2: one in the corresponding vm_struct object and the other owned by the vmalloc() caller. There are cases, however, where the original vmalloc() returned pointer is lost and, instead, a pointer to vm_struct is stored (see free_thread_stack()). Kmemleak currently reports such objects as leaks. This patch adds support for treating any surplus references to an object as additional references to a specified object. It introduces the kmemleak_vmalloc() API function which takes a vm_struct pointer and sets its surplus reference passing to the actual vmalloc() returned pointer. The __vmalloc_node_range() calling site has been modified accordingly. Link: http://lkml.kernel.org/r/1495726937-23557-4-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: "Luis R. Rodriguez" <mcgrof@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: kmemleak: factor object reference updating out of scan_block()Catalin Marinas1-18/+25
scan_block() updates the number of references (pointers) to objects, adding them to the gray_list when object->min_count is reached. The patch factors out this functionality into a separate update_refs() function. Link: http://lkml.kernel.org/r/1495726937-23557-3-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06mm: kmemleak: slightly reduce the size of some structures on 64-bit ↵Catalin Marinas1-3/+3
architectures Change the kmemleak_object.flags type to unsigned int and moves the early_log.min_count (int) near early_log.op_type (int) to slightly reduce the size of these structures on 64-bit architectures. Link: http://lkml.kernel.org/r/1495726937-23557-2-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: "Luis R. Rodriguez" <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-31mm: fix section name for .data..ro_after_initKees Cook1-1/+1
A section name for .data..ro_after_init was added by both: commit d07a980c1b8d ("s390: add proper __ro_after_init support") and commit d7c19b066dcf ("mm: kmemleak: scan .data.ro_after_init") The latter adds incorrect wrapping around the existing s390 section, and came later. I'd prefer the s390 naming, so this moves the s390-specific name up to the asm-generic/sections.h and renames the section as used by kmemleak (and in the future, kernel/extable.c). Link: http://lkml.kernel.org/r/20170327192213.GA129375@beast Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390 parts] Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Eddie Kovsky <ewk@edkovsky.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-1/+1
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-12kmemleak: fix reference to DocumentationAndreas Platschek1-1/+1
Documentation/kmemleak.txt was moved to Documentation/dev-tools/kmemleak.rst, this fixes the reference to the new location. Link: http://lkml.kernel.org/r/1476544946-18804-1-git-send-email-andreas.platschek@opentech.at Signed-off-by: Andreas Platschek <andreas.platschek@opentech.at> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-11mm: kmemleak: scan .data.ro_after_initJakub Kicinski1-0/+1
Limit the number of kmemleak false positives by including .data.ro_after_init in memory scanning. To achieve this we need to add symbols for start and end of the section to the linker scripts. The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark families as __ro_after_init"). Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27mm: kmemleak: ensure that the task stack is not freed during scanningCatalin Marinas1-2/+5
Commit 68f24b08ee89 ("sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK") may cause the task->stack to be freed during kmemleak_scan() execution, leading to either a NULL pointer fault (if task->stack is NULL) or kmemleak accessing already freed memory. This patch uses the new try_get_task_stack() API to ensure that the task stack is not freed during kmemleak stack scanning. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=173901. Fixes: 68f24b08ee89 ("sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK") Link: http://lkml.kernel.org/r/1476266223-14325-1-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: CAI Qian <caiqian@redhat.com> Tested-by: CAI Qian <caiqian@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: CAI Qian <caiqian@redhat.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mappingCatalin Marinas1-0/+47
Some of the kmemleak_*() callbacks in memblock, bootmem, CMA convert a physical address to a virtual one using __va(). However, such physical addresses may sometimes be located in highmem and using __va() is incorrect, leading to inconsistent object tracking in kmemleak. The following functions have been added to the kmemleak API and they take a physical address as the object pointer. They only perform the corresponding action if the address has a lowmem mapping: kmemleak_alloc_phys kmemleak_free_part_phys kmemleak_not_leak_phys kmemleak_ignore_phys The affected calling places have been updated to use the new kmemleak API. Link: http://lkml.kernel.org/r/1471531432-16503-1-git-send-email-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28kmemleak: don't hang if user disables scanning earlyVegard Nossum1-1/+3
If the user tries to disable automatic scanning early in the boot process using e.g.: echo scan=off > /sys/kernel/debug/kmemleak then this command will hang until SECS_FIRST_SCAN (= 60) seconds have elapsed, even though the system is fully initialised. We can fix this using interruptible sleep and checking if we're supposed to stop whenever we wake up (like the rest of the code does). Link: http://lkml.kernel.org/r/1468835005-2873-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24mm: prevent KASAN false positives in kmemleakDmitry Vyukov1-0/+2
When kmemleak dumps contents of leaked objects it reads whole objects regardless of user-requested size. This upsets KASAN. Disable KASAN checks around object dump. Link: http://lkml.kernel.org/r/1466617631-68387-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: coalesce split stringsJoe Perches1-10/+8
Kernel style prefers a single string over split strings when the string is 'user-visible'. Miscellanea: - Add a missing newline - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-17mm: convert pr_warning to pr_warnJoe Perches1-7/+7
There are a mixture of pr_warning and pr_warn uses in mm. Use pr_warn consistently. Miscellanea: - Coalesce formats - Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Tejun Heo <tj@kernel.org> [percpu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-14Revert "gfp: add __GFP_NOACCOUNT"Vladimir Davydov1-2/+1
This reverts commit 8f4fc071b192 ("gfp: add __GFP_NOACCOUNT"). Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So it was decided to switch to the white-list policy. This patch reverts bits introducing the black-list policy. The white-list policy will be introduced later in the series. Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05mm/kmemleak.c: remove unneeded initialization of object to NULLAlexey Klimov1-1/+1
Few lines below object is reinitialized by lookup_object() so we don't need to init it by NULL in the beginning of find_and_get_object(). Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-10kmemleak: use seq_hex_dump() to dump buffersAndy Shevchenko1-15/+6
Instead of custom approach let's use recently introduced seq_hex_dump() helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Cc: Tadeusz Struk <tadeusz.struk@intel.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Tuchscherer <ingo.tuchscherer@de.ibm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08kmemleak: record accurate early log buffer count and report when exceededWang Kai1-1/+2
In log_early function, crt_early_log should also count once when 'crt_early_log >= ARRAY_SIZE(early_log)'. Otherwise the reported count from kmemleak_init is one less than 'actual number'. Then, in kmemleak_init, if early_log buffer size equal actual number, kmemleak will init sucessful, so change warning condition to 'crt_early_log > ARRAY_SIZE(early_log)'. Signed-off-by: Wang Kai <morgan.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak_alloc_percpu() should follow the gfp from per_alloc()Larry Finger1-4/+5
Beginning at commit d52d3997f843 ("ipv6: Create percpu rt6_info"), the following INFO splat is logged: =============================== [ INFO: suspicious RCU usage. ] 4.1.0-rc7-next-20150612 #1 Not tainted ------------------------------- kernel/sched/core.c:7318 Illegal context switch in RCU-bh read-side critical section! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 3 locks held by systemd/1: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815f0c8f>] rtnetlink_rcv+0x1f/0x40 #1: (rcu_read_lock_bh){......}, at: [<ffffffff816a34e2>] ipv6_add_addr+0x62/0x540 #2: (addrconf_hash_lock){+...+.}, at: [<ffffffff816a3604>] ipv6_add_addr+0x184/0x540 stack backtrace: CPU: 0 PID: 1 Comm: systemd Not tainted 4.1.0-rc7-next-20150612 #1 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014 Call Trace: dump_stack+0x4c/0x6e lockdep_rcu_suspicious+0xe7/0x120 ___might_sleep+0x1d5/0x1f0 __might_sleep+0x4d/0x90 kmem_cache_alloc+0x47/0x250 create_object+0x39/0x2e0 kmemleak_alloc_percpu+0x61/0xe0 pcpu_alloc+0x370/0x630 Additional backtrace lines are truncated. In addition, the above splat is followed by several "BUG: sleeping function called from invalid context at mm/slub.c:1268" outputs. As suggested by Martin KaFai Lau, these are the clue to the fix. Routine kmemleak_alloc_percpu() always uses GFP_KERNEL for its allocations, whereas it should follow the gfp from its callers. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: <stable@vger.kernel.org> [3.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: optimise kmemleak_lock acquiring during kmemleak_scanCatalin Marinas1-34/+56
The kmemleak memory scanning uses finer grained object->lock spinlocks primarily to avoid races with the memory block freeing. However, the pointer lookup in the rb tree requires the kmemleak_lock to be held. This is currently done in the find_and_get_object() function for each pointer-like location read during scanning. While this allows a low latency on kmemleak_*() callbacks on other CPUs, the memory scanning is slower. This patch moves the kmemleak_lock outside the scan_block() loop, acquiring/releasing it only once per scanned memory block. The allow_resched logic is moved outside scan_block() and a new scan_large_block() function is implemented which splits large blocks in MAX_SCAN_SIZE chunks with cond_resched() calls in-between. A redundant (object->flags & OBJECT_NO_SCAN) check is also removed from scan_object(). With this patch, the kmemleak scanning performance is significantly improved: at least 50% with lock debugging disabled and over an order of magnitude with lock proving enabled (on an arm64 system). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: avoid deadlock on the kmemleak object insertion error pathCatalin Marinas1-4/+11
While very unlikely (usually kmemleak or sl*b bug), the create_object() function in mm/kmemleak.c may fail to insert a newly allocated object into the rb tree. When this happens, kmemleak disables itself and prints additional information about the object already found in the rb tree. Such printing is done with the parent->lock acquired, however the kmemleak_lock is already held. This is a potential race with the scanning thread which acquires object->lock and kmemleak_lock in a This patch removes the locking around the 'parent' object information printing. Such object cannot be freed or removed from object_tree_root and object_list since kmemleak_lock is already held. There is a very small risk that some of the object data is being modified on another CPU but the only downside is inconsistent information printing. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: do not acquire scan_mutex in kmemleak_do_cleanup()Catalin Marinas1-2/+0
The kmemleak_do_cleanup() work thread already waits for the kmemleak_scan thread to finish via kthread_stop(). Waiting in kthread_stop() while scan_mutex is held may lead to deadlock if kmemleak_scan_thread() also waits to acquire for scan_mutex. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: fix delete_object_*() race when called on the same memory blockCatalin Marinas1-13/+26
Calling delete_object_*() on the same pointer is not a standard use case (unless there is a bug in the code calling kmemleak_free()). However, during kmemleak disabling (error or user triggered via /sys), there is a potential race between kmemleak_free() calls on a CPU and __kmemleak_do_cleanup() on a different CPU. The current delete_object_*() implementation first performs a look-up holding kmemleak_lock, increments the object->use_count and then re-acquires kmemleak_lock to remove the object from object_tree_root and object_list. This patch simplifies the delete_object_*() mechanism to both look up and remove an object from the object_tree_root and object_list atomically (guarded by kmemleak_lock). This allows safe concurrent calls to delete_object_*() on the same pointer without additional locking for synchronising the kmemleak_free_enabled flag. A side effect is a slight improvement in the delete_object_*() performance by avoiding acquiring kmemleak_lock twice and incrementing/decrementing object->use_count. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-24mm: kmemleak: allow safe memory scanning during kmemleak disablingCatalin Marinas1-3/+16
The kmemleak scanning thread can run for minutes. Callbacks like kmemleak_free() are allowed during this time, the race being taken care of by the object->lock spinlock. Such lock also prevents a memory block from being freed or unmapped while it is being scanned by blocking the kmemleak_free() -> ... -> __delete_object() function until the lock is released in scan_object(). When a kmemleak error occurs (e.g. it fails to allocate its metadata), kmemleak_enabled is set and __delete_object() is no longer called on freed objects. If kmemleak_scan is running at the same time, kmemleak_free() no longer waits for the object scanning to complete, allowing the corresponding memory block to be freed or unmapped (in the case of vfree()). This leads to kmemleak_scan potentially triggering a page fault. This patch separates the kmemleak_free() enabling/disabling from the overall kmemleak_enabled nob so that we can defer the disabling of the object freeing tracking until the scanning thread completed. The kmemleak_free_part() is deliberately ignored by this patch since this is only called during boot before the scanning thread started. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org> Tested-by: Vignesh Radhakrishnan <vigneshr@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>