summaryrefslogtreecommitdiffstats
path: root/mm/kasan
AgeCommit message (Collapse)AuthorFilesLines
2018-08-17kernel/memremap, kasan: make ZONE_DEVICE with work with KASANAndrey Ryabinin1-13/+303
KASAN learns about hotadded memory via the memory hotplug notifier. devm_memremap_pages() intentionally skips calling memory hotplug notifiers. So KASAN doesn't know anything about new memory added by devm_memremap_pages(). This causes a crash when KASAN tries to access non-existent shadow memory: BUG: unable to handle kernel paging request at ffffed0078000000 RIP: 0010:check_memory_region+0x82/0x1e0 Call Trace: memcpy+0x1f/0x50 pmem_do_bvec+0x163/0x720 pmem_make_request+0x305/0xac0 generic_make_request+0x54f/0xcf0 submit_bio+0x9c/0x370 submit_bh_wbc+0x4c7/0x700 block_read_full_page+0x5ef/0x870 do_read_cache_page+0x2b8/0xb30 read_dev_sector+0xbd/0x3f0 read_lba.isra.0+0x277/0x670 efi_partition+0x41a/0x18f0 check_partition+0x30d/0x5e9 rescan_partitions+0x18c/0x840 __blkdev_get+0x859/0x1060 blkdev_get+0x23f/0x810 __device_add_disk+0x9c8/0xde0 pmem_attach_disk+0x9a8/0xf50 nvdimm_bus_probe+0xf3/0x3c0 driver_probe_device+0x493/0xbd0 bus_for_each_drv+0x118/0x1b0 __device_attach+0x1cd/0x2b0 bus_probe_device+0x1ac/0x260 device_add+0x90d/0x1380 nd_async_device_register+0xe/0x50 async_run_entry_fn+0xc3/0x5d0 process_one_work+0xa0a/0x1810 worker_thread+0x87/0xe80 kthread+0x2d7/0x390 ret_from_fork+0x3a/0x50 Add kasan_add_zero_shadow()/kasan_remove_zero_shadow() - post mm_init() interface to map/unmap kasan_zero_page at requested virtual addresses. And use it to add/remove the shadow memory for hotplugged/unplugged device memory. Link: http://lkml.kernel.org/r/20180629164932.740-1-aryabinin@virtuozzo.com Fixes: 41e94a851304 ("add devm_memremap_pages") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-03kasan: fix shadow_size calculation error in kasan_module_allocZhen Lei1-2/+3
There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT) Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1]. The operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the roundup operation can not retrieve the missed one page. For example: size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get shadow_size=0x5000, but actually we need 6 pages. shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE); This can lead to a kernel crash when kasan is enabled and the value of mod->core_layout.size or mod->init_layout.size is like above. Because the shadow memory of X has not been allocated and mapped. move_module: ptr = module_alloc(mod->core_layout.size); ... memset(ptr, 0, mod->core_layout.size); //crashed Unable to handle kernel paging request at virtual address ffff0fffff97b000 ...... Call trace: __asan_storeN+0x174/0x1a8 memset+0x24/0x48 layout_and_allocate+0xcd8/0x1800 load_module+0x190/0x23e8 SyS_finit_module+0x148/0x180 Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.com Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Dmitriy Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Libin <huawei.libin@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25kasan: fix memory hotplug during bootDavid Hildenbrand1-1/+1
Using module_init() is wrong. E.g. ACPI adds and onlines memory before our memory notifier gets registered. This makes sure that ACPI memory detected during boot up will not result in a kernel crash. Easily reproducible with QEMU, just specify a DIMM when starting up. Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com Fixes: 786a8959912e ("kasan: disable memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25kasan: free allocated shadow memory on MEM_CANCEL_ONLINEDavid Hildenbrand1-0/+1
We have to free memory again when we cancel onlining, otherwise a later onlining attempt will fail. Link: http://lkml.kernel.org/r/20180522100756.18478-2-david@redhat.com Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug") Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-05-25mm/kasan: don't vfree() nonexistent vm_areaAndrey Ryabinin1-2/+61
KASAN uses different routines to map shadow for hot added memory and memory obtained in boot process. Attempt to offline memory onlined by normal boot process leads to this: Trying to vfree() nonexistent vm area (000000005d3b34b9) WARNING: CPU: 2 PID: 13215 at mm/vmalloc.c:1525 __vunmap+0x147/0x190 Call Trace: kasan_mem_notifier+0xad/0xb9 notifier_call_chain+0x166/0x260 __blocking_notifier_call_chain+0xdb/0x140 __offline_pages+0x96a/0xb10 memory_subsys_offline+0x76/0xc0 device_offline+0xb8/0x120 store_mem_state+0xfa/0x120 kernfs_fop_write+0x1d5/0x320 __vfs_write+0xd4/0x530 vfs_write+0x105/0x340 SyS_write+0xb0/0x140 Obviously we can't call vfree() to free memory that wasn't allocated via vmalloc(). Use find_vm_area() to see if we can call vfree(). Unfortunately it's a bit tricky to properly unmap and free shadow allocated during boot, so we'll have to keep it. If memory will come online again that shadow will be reused. Matthew asked: how can you call vfree() on something that isn't a vmalloc address? vfree() is able to free any address returned by __vmalloc_node_range(). And __vmalloc_node_range() gives you any address you ask. It doesn't have to be an address in [VMALLOC_START, VMALLOC_END] range. That's also how the module_alloc()/module_memfree() works on architectures that have designated area for modules. [aryabinin@virtuozzo.com: improve comments] Link: http://lkml.kernel.org/r/dabee6ab-3a7a-51cd-3b86-5468718e0390@virtuozzo.com [akpm@linux-foundation.org: fix typos, reflow comment] Link: http://lkml.kernel.org/r/20180201163349.8700-1-aryabinin@virtuozzo.com Fixes: fa69b5989bb0 ("mm/kasan: add support for memory hotplug") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Paul Menzel <pmenzel+linux-kasan-dev@molgen.mpg.de> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05slab, slub: skip unnecessary kasan_cache_shutdown()Shakeel Butt1-1/+2
The kasan quarantine is designed to delay freeing slab objects to catch use-after-free. The quarantine can be large (several percent of machine memory size). When kmem_caches are deleted related objects are flushed from the quarantine but this requires scanning the entire quarantine which can be very slow. We have seen the kernel busily working on this while holding slab_mutex and badly affecting cache_reaper, slabinfo readers and memcg kmem cache creations. It can easily reproduced by following script: yes . | head -1000000 | xargs stat > /dev/null for i in `seq 1 10`; do seq 500 | (cd /cg/memory && xargs mkdir) seq 500 | xargs -I{} sh -c 'echo $BASHPID > \ /cg/memory/{}/tasks && exec stat .' > /dev/null seq 500 | (cd /cg/memory && xargs rmdir) done The busy stack: kasan_cache_shutdown shutdown_cache memcg_destroy_kmem_caches mem_cgroup_css_free css_free_rwork_fn process_one_work worker_thread kthread ret_from_fork This patch is based on the observation that if the kmem_cache to be destroyed is empty then there should not be any objects of this cache in the quarantine. Without the patch the script got stuck for couple of hours. With the patch the script completed within a second. Link: http://lkml.kernel.org/r/20180327230603.54721-1-shakeelb@google.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Greg Thelen <gthelen@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-05kasan: make kasan_cache_create() work with 32-bit slab cache sizesAlexey Dobriyan1-6/+6
If SLAB doesn't support 4GB+ kmem caches (it never did), KASAN should not do it as well. Link: http://lkml.kernel.org/r/20180305200730.15812-20-adobriyan@gmail.com Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-14x86/mm: Make PGDIR_SHIFT and PTRS_PER_P4D variableKirill A. Shutemov1-1/+1
For boot-time switching between 4- and 5-level paging we need to be able to fold p4d page table level at runtime. It requires variable PGDIR_SHIFT and PTRS_PER_P4D. The change doesn't affect the kernel image size much: text data bss dec hex filename 8628091 4734304 1368064 14730459 e0c4db vmlinux.before 8628393 4734340 1368064 14730797 e0c62d vmlinux.after Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180214111656.88514-7-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-06kasan: fix prototype author email addressAndrey Konovalov2-2/+2
Use the new one. Link: http://lkml.kernel.org/r/de3b7ffc30a55178913a7d3865216aa7accf6c40.1515775666.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: detect invalid freesDmitry Vyukov1-0/+6
Detect frees of pointers into middle of heap objects. Link: http://lkml.kernel.org/r/cb569193190356beb018a03bb8d6fbae67e7adbc.1514378558.git.dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: unify code between kasan_slab_free() and kasan_poison_kfree()Dmitry Vyukov1-16/+12
Both of these functions deal with freeing of slab objects. However, kasan_poison_kfree() mishandles SLAB_TYPESAFE_BY_RCU (must also not poison such objects) and does not detect double-frees. Unify code between these functions. This solves both of the problems and allows to add more common code (e.g. detection of invalid frees). Link: http://lkml.kernel.org/r/385493d863acf60408be219a021c3c8e27daa96f.1514378558.git.dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: detect invalid frees for large mempool objectsDmitry Vyukov1-3/+8
Detect frees of pointers into middle of mempool objects. I did a one-off test, but it turned out to be very tricky, so I reverted it. First, mempool does not call kasan_poison_kfree() unless allocation function fails. I stubbed an allocation function to fail on second and subsequent allocations. But then mempool stopped to call kasan_poison_kfree() at all, because it does it only when allocation function is mempool_kmalloc(). We could support this special failing test allocation function in mempool, but it also can't live with kasan tests, because these are in a module. Link: http://lkml.kernel.org/r/bf7a7d035d7a5ed62d2dd0e3d2e8a4fcdf456aa7.1514378558.git.dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: don't use __builtin_return_address(1)Dmitry Vyukov3-7/+7
__builtin_return_address(1) is unreliable without frame pointers. With defconfig on kmalloc_pagealloc_invalid_free test I am getting: BUG: KASAN: double-free or invalid-free in (null) Pass caller PC from callers explicitly. Link: http://lkml.kernel.org/r/9b01bc2d237a4df74ff8472a3bf6b7635908de01.1514378558.git.dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: detect invalid frees for large objectsDmitry Vyukov3-11/+7
Patch series "kasan: detect invalid frees". KASAN detects double-frees, but does not detect invalid-frees (when a pointer into a middle of heap object is passed to free). We recently had a very unpleasant case in crypto code which freed an inner object inside of a heap allocation. This left unnoticed during free, but totally corrupted heap and later lead to a bunch of random crashes all over kernel code. Detect invalid frees. This patch (of 5): Detect frees of pointers into middle of large heap objects. I dropped const from kasan_kfree_large() because it starts propagating through a bunch of functions in kasan_report.c, slab/slub nearest_obj(), all of their local variables, fixup_red_left(), etc. Link: http://lkml.kernel.org/r/1b45b4fe1d20fc0de1329aab674c1dd973fee723.1514378558.git.dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>a Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: add functions for unpoisoning stack variablesAlexander Potapenko2-0/+59
As a code-size optimization, LLVM builds since r279383 may bulk-manipulate the shadow region when (un)poisoning large memory blocks. This requires new callbacks that simply do an uninstrumented memset(). This fixes linking the Clang-built kernel when using KASAN. [arnd@arndb.de: add declarations for internal functions] Link: http://lkml.kernel.org/r/20180105094112.2690475-1-arnd@arndb.de [fengguang.wu@intel.com: __asan_set_shadow_00 can be static] Link: http://lkml.kernel.org/r/20171223125943.GA74341@lkp-ib03 [ghackmann@google.com: fix memset() parameters, and tweak commit message to describe new callbacks] Link: http://lkml.kernel.org/r/20171204191735.132544-6-paullawrence@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Paul Lawrence <paullawrence@google.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06kasan: support alloca() poisoningPaul Lawrence3-0/+46
clang's AddressSanitizer implementation adds redzones on either side of alloca()ed buffers. These redzones are 32-byte aligned and at least 32 bytes long. __asan_alloca_poison() is passed the size and address of the allocated buffer, *excluding* the redzones on either side. The left redzone will always be to the immediate left of this buffer; but AddressSanitizer may need to add padding between the end of the buffer and the right redzone. If there are any 8-byte chunks inside this padding, we should poison those too. __asan_allocas_unpoison() is just passed the top and bottom of the dynamic stack area, so unpoisoning is simpler. Link: http://lkml.kernel.org/r/20171204191735.132544-4-paullawrence@google.com Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Paul Lawrence <paullawrence@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-29kasan: use %px to print addresses instead of %pTobin C. Harding1-4/+4
Pointers printed with %p are now hashed by default. Kasan needs the actual address. We can use the new printk specifier %px for this purpose. Use %px instead of %p to print addresses. Signed-off-by: Tobin C. Harding <me@tobin.cc>
2017-11-15slab, slub, slob: add slab_flags_tAlexey Dobriyan1-1/+1
Add sparse-checked slab_flags_t for struct kmem_cache::flags (SLAB_POISON, etc). SLAB is bloated temporarily by switching to "unsigned long", but only temporarily. Link: http://lkml.kernel.org/r/20171021100225.GA22428@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-10Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar1-0/+1
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-02kasan: avoid -Wmaybe-uninitialized warningArnd Bergmann1-0/+1
gcc-7 produces this warning: mm/kasan/report.c: In function 'kasan_report': mm/kasan/report.c:351:3: error: 'info.first_bad_addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] print_shadow_for_address(info->first_bad_addr); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mm/kasan/report.c:360:27: note: 'info.first_bad_addr' was declared here The code seems fine as we only print info.first_bad_addr when there is a shadow, and we always initialize it in that case, but this is relatively hard for gcc to figure out after the latest rework. Adding an intialization to the most likely value together with the other struct members shuts up that warning. Fixes: b235b9808664 ("kasan: unify report headers") Link: https://patchwork.kernel.org/patch/9641417/ Link: http://lkml.kernel.org/r/20170725152739.4176967-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Alexander Potapenko <glider@google.com> Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-26kasan: Allow kasan_check_read/write() to accept pointers to volatilesDmitry Vyukov1-2/+2
Currently kasan_check_read/write() accept 'const void*', make them accept 'const volatile void*'. This is required for instrumentation of atomic operations and there is just no reason to not allow that. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kasan-dev@googlegroups.com Cc: linux-mm@kvack.org Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/33e5ec275c1ee89299245b2ebbccd63709c6021f.1498140838.git.dvyukov@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-10kasan: make get_wild_bug_type() staticColin Ian King1-1/+1
The helper function get_wild_bug_type() does not need to be in global scope, so make it static. Cleans up sparse warning: "symbol 'get_wild_bug_type' was not declared. Should it be static?" Link: http://lkml.kernel.org/r/20170622090049.10658-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10mm/kasan/kasan.c: rename XXX_is_zero to XXX_is_nonzeroJoonsoo Kim1-7/+7
They return positive value, that is, true, if non-zero value is found. Rename them to reduce confusion. Link: http://lkml.kernel.org/r/20170516012350.GA16015@js1304-desktop Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10mm/kasan: add support for memory hotplugAndrey Ryabinin1-5/+35
KASAN doesn't happen work with memory hotplug because hotplugged memory doesn't have any shadow memory. So any access to hotplugged memory would cause a crash on shadow check. Use memory hotplug notifier to allocate and map shadow memory when the hotplugged memory is going online and free shadow after the memory offlined. Link: http://lkml.kernel.org/r/20170601162338.23540-4-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Potapenko <glider@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10mm/kasan: get rid of speculative shadow checksAndrey Ryabinin1-82/+16
For some unaligned memory accesses we have to check additional byte of the shadow memory. Currently we load that byte speculatively to have only single load + branch on the optimistic fast path. However, this approach has some downsides: - It's unaligned access, so this prevents porting KASAN on architectures which doesn't support unaligned accesses. - We have to map additional shadow page to prevent crash if speculative load happens near the end of the mapped memory. This would significantly complicate upcoming memory hotplug support. I wasn't able to notice any performance degradation with this patch. So these speculative loads is just a pain with no gain, let's remove them. Link: http://lkml.kernel.org/r/20170601162338.23540-1-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-10mm/kasan/kasan_init.c: use kasan_zero_pud for p4d tableJoonsoo Kim1-0/+12
There is missing optimization in zero_p4d_populate() that can save some memory when mapping zero shadow. Implement it like as others. Link: http://lkml.kernel.org/r/1494829255-23946-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-10Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes are: - Debloat RCU headers - Parallelize SRCU callback handling (plus overlapping patches) - Improve the performance of Tree SRCU on a CPU-hotplug stress test - Documentation updates - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) rcu: Open-code the rcu_cblist_n_lazy_cbs() function rcu: Open-code the rcu_cblist_n_cbs() function rcu: Open-code the rcu_cblist_empty() function rcu: Separately compile large rcu_segcblist functions srcu: Debloat the <linux/rcu_segcblist.h> header srcu: Adjust default auto-expediting holdoff srcu: Specify auto-expedite holdoff time srcu: Expedite first synchronize_srcu() when idle srcu: Expedited grace periods with reduced memory contention srcu: Make rcutorture writer stalls print SRCU GP state srcu: Exact tracking of srcu_data structures containing callbacks srcu: Make SRCU be built by default srcu: Fix Kconfig botch when SRCU not selected rcu: Make non-preemptive schedule be Tasks RCU quiescent state srcu: Expedite srcu_schedule_cbs_snp() callback invocation srcu: Parallelize callback handling kvm: Move srcu_struct fields to end of struct kvm rcu: Fix typo in PER_RCU_NODE_PERIOD header comment rcu: Use true/false in assignment to bool rcu: Use bool value directly ...
2017-05-08mm, vmalloc: use __GFP_HIGHMEM implicitlyMichal Hocko1-1/+1
__vmalloc* allows users to provide gfp flags for the underlying allocation. This API is quite popular $ git grep "=[[:space:]]__vmalloc\|return[[:space:]]*__vmalloc" | wc -l 77 The only problem is that many people are not aware that they really want to give __GFP_HIGHMEM along with other flags because there is really no reason to consume precious lowmemory on CONFIG_HIGHMEM systems for pages which are mapped to the kernel vmalloc space. About half of users don't use this flag, though. This signals that we make the API unnecessarily too complex. This patch simply uses __GFP_HIGHMEM implicitly when allocating pages to be mapped to the vmalloc space. Current users which add __GFP_HIGHMEM are simplified and drop the flag. Link: http://lkml.kernel.org/r/20170307141020.29107-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Cristopher Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: separate report parts by empty linesAndrey Konovalov1-0/+7
Makes the report easier to read. Link: http://lkml.kernel.org/r/20170302134851.101218-10-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: improve double-free report formatAndrey Konovalov3-18/+17
Changes double-free report header from BUG: Double free or freeing an invalid pointer Unexpected shadow byte: 0xFB to BUG: KASAN: double-free or invalid-free in kmalloc_oob_left+0xe5/0xef This makes a bug uniquely identifiable by the first report line. To account for removing of the unexpected shadow value, print shadow bytes at the end of the report as in reports for other kinds of bugs. Link: http://lkml.kernel.org/r/20170302134851.101218-9-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: print page description after stacksAndrey Konovalov1-6/+8
Moves page description after the stacks since it's less important. Link: http://lkml.kernel.org/r/20170302134851.101218-8-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: improve slab object descriptionAndrey Konovalov1-11/+42
Changes slab object description from: Object at ffff880068388540, in cache kmalloc-128 size: 128 to: The buggy address belongs to the object at ffff880068388540 which belongs to the cache kmalloc-128 of size 128 The buggy address is located 123 bytes inside of 128-byte region [ffff880068388540, ffff8800683885c0) Makes it more explanatory and adds information about relative offset of the accessed address to the start of the object. Link: http://lkml.kernel.org/r/20170302134851.101218-7-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: change report headerAndrey Konovalov1-4/+4
Change report header format from: BUG: KASAN: use-after-free in unwind_get_return_address+0x28a/0x2c0 at addr ffff880069437950 Read of size 8 by task insmod/3925 to: BUG: KASAN: use-after-free in unwind_get_return_address+0x28a/0x2c0 Read of size 8 at addr ffff880069437950 by task insmod/3925 The exact access address is not usually important, so move it to the second line. This also makes the header look visually balanced. Link: http://lkml.kernel.org/r/20170302134851.101218-6-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: simplify address description logicAndrey Konovalov1-16/+21
Simplify logic for describing a memory address. Add addr_to_page() helper function. Makes the code easier to follow. Link: http://lkml.kernel.org/r/20170302134851.101218-5-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: change allocation and freeing stack traces headersAndrey Konovalov1-6/+4
Change stack traces headers from: Allocated: PID = 42 to: Allocated by task 42: Makes the report one line shorter and look better. Link: http://lkml.kernel.org/r/20170302134851.101218-4-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: unify report headersAndrey Konovalov1-13/+13
Unify KASAN report header format for different kinds of bad memory accesses. Makes the code simpler. Link: http://lkml.kernel.org/r/20170302134851.101218-3-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-03kasan: introduce helper functions for determining bug typeAndrey Konovalov1-10/+30
Patch series "kasan: improve error reports", v2. This patchset improves KASAN reports by making them easier to read and a little more detailed. Also improves mm/kasan/report.c readability. Effectively changes a use-after-free report to: ================================================================== BUG: KASAN: use-after-free in kmalloc_uaf+0xaa/0xb6 [test_kasan] Write of size 1 at addr ffff88006aa59da8 by task insmod/3951 CPU: 1 PID: 3951 Comm: insmod Tainted: G B 4.10.0+ #84 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x292/0x398 print_address_description+0x73/0x280 kasan_report.part.2+0x207/0x2f0 __asan_report_store1_noabort+0x2c/0x30 kmalloc_uaf+0xaa/0xb6 [test_kasan] kmalloc_tests_init+0x4f/0xa48 [test_kasan] do_one_initcall+0xf3/0x390 do_init_module+0x215/0x5d0 load_module+0x54de/0x82b0 SYSC_init_module+0x3be/0x430 SyS_init_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x7f22cfd0b9da RSP: 002b:00007ffe69118a78 EFLAGS: 00000206 ORIG_RAX: 00000000000000af RAX: ffffffffffffffda RBX: 0000555671242090 RCX: 00007f22cfd0b9da RDX: 00007f22cffcaf88 RSI: 000000000004df7e RDI: 00007f22d0399000 RBP: 00007f22cffcaf88 R08: 0000000000000003 R09: 0000000000000000 R10: 00007f22cfd07d0a R11: 0000000000000206 R12: 0000555671243190 R13: 000000000001fe81 R14: 0000000000000000 R15: 0000000000000004 Allocated by task 3951: save_stack_trace+0x16/0x20 save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kmem_cache_alloc_trace+0x82/0x270 kmalloc_uaf+0x56/0xb6 [test_kasan] kmalloc_tests_init+0x4f/0xa48 [test_kasan] do_one_initcall+0xf3/0x390 do_init_module+0x215/0x5d0 load_module+0x54de/0x82b0 SYSC_init_module+0x3be/0x430 SyS_init_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x1f/0xc2 Freed by task 3951: save_stack_trace+0x16/0x20 save_stack+0x43/0xd0 kasan_slab_free+0x72/0xc0 kfree+0xe8/0x2b0 kmalloc_uaf+0x85/0xb6 [test_kasan] kmalloc_tests_init+0x4f/0xa48 [test_kasan] do_one_initcall+0xf3/0x390 do_init_module+0x215/0x5d0 load_module+0x54de/0x82b0 SYSC_init_module+0x3be/0x430 SyS_init_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x1f/0xc The buggy address belongs to the object at ffff88006aa59da0 which belongs to the cache kmalloc-16 of size 16 The buggy address is located 8 bytes inside of 16-byte region [ffff88006aa59da0, ffff88006aa59db0) The buggy address belongs to the page: page:ffffea0001aa9640 count:1 mapcount:0 mapping: (null) index:0x0 flags: 0x100000000000100(slab) raw: 0100000000000100 0000000000000000 0000000000000000 0000000180800080 raw: ffffea0001abe380 0000000700000007 ffff88006c401b40 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88006aa59c80: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc ffff88006aa59d00: 00 00 fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc >ffff88006aa59d80: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc ^ ffff88006aa59e00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc ffff88006aa59e80: fb fb fc fc 00 00 fc fc 00 00 fc fc 00 00 fc fc ================================================================== from: ================================================================== BUG: KASAN: use-after-free in kmalloc_uaf+0xaa/0xb6 [test_kasan] at addr ffff88006c4dcb28 Write of size 1 by task insmod/3984 CPU: 1 PID: 3984 Comm: insmod Tainted: G B 4.10.0+ #83 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x292/0x398 kasan_object_err+0x1c/0x70 kasan_report.part.1+0x20e/0x4e0 __asan_report_store1_noabort+0x2c/0x30 kmalloc_uaf+0xaa/0xb6 [test_kasan] kmalloc_tests_init+0x4f/0xa48 [test_kasan] do_one_initcall+0xf3/0x390 do_init_module+0x215/0x5d0 load_module+0x54de/0x82b0 SYSC_init_module+0x3be/0x430 SyS_init_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x7feca0f779da RSP: 002b:00007ffdfeae5218 EFLAGS: 00000206 ORIG_RAX: 00000000000000af RAX: ffffffffffffffda RBX: 000055a064c13090 RCX: 00007feca0f779da RDX: 00007feca1236f88 RSI: 000000000004df7e RDI: 00007feca1605000 RBP: 00007feca1236f88 R08: 0000000000000003 R09: 0000000000000000 R10: 00007feca0f73d0a R11: 0000000000000206 R12: 000055a064c14190 R13: 000000000001fe81 R14: 0000000000000000 R15: 0000000000000004 Object at ffff88006c4dcb20, in cache kmalloc-16 size: 16 Allocated: PID = 3984 save_stack_trace+0x16/0x20 save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kmem_cache_alloc_trace+0x82/0x270 kmalloc_uaf+0x56/0xb6 [test_kasan] kmalloc_tests_init+0x4f/0xa48 [test_kasan] do_one_initcall+0xf3/0x390 do_init_module+0x215/0x5d0 load_module+0x54de/0x82b0 SYSC_init_module+0x3be/0x430 SyS_init_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x1f/0xc2 Freed: PID = 3984 save_stack_trace+0x16/0x20 save_stack+0x43/0xd0 kasan_slab_free+0x73/0xc0 kfree+0xe8/0x2b0 kmalloc_uaf+0x85/0xb6 [test_kasan] kmalloc_tests_init+0x4f/0xa48 [test_kasan] do_one_initcall+0xf3/0x390 do_init_module+0x215/0x5d0 load_module+0x54de/0x82b0 SYSC_init_module+0x3be/0x430 SyS_init_module+0x9/0x10 entry_SYSCALL_64_fastpath+0x1f/0xc2 Memory state around the buggy address: ffff88006c4dca00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc ffff88006c4dca80: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc >ffff88006c4dcb00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc ^ ffff88006c4dcb80: fb fb fc fc 00 00 fc fc fb fb fc fc fb fb fc fc ffff88006c4dcc00: fb fb fc fc fb fb fc fc fb fb fc fc fb fb fc fc ================================================================== This patch (of 9): Introduce get_shadow_bug_type() function, which determines bug type based on the shadow value for a particular kernel address. Introduce get_wild_bug_type() function, which determines bug type for addresses which don't have a corresponding shadow value. Link: http://lkml.kernel.org/r/20170302134851.101218-2-andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-23Merge branch 'for-mingo' of ↵Ingo Molnar1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Documentation updates. - Miscellaneous fixes. - Parallelize SRCU callback handling (plus overlapping patches). Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-18mm: Rename SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCUPaul E. McKenney1-3/+3
A group of Linux kernel hackers reported chasing a bug that resulted from their assumption that SLAB_DESTROY_BY_RCU provided an existence guarantee, that is, that no block from such a slab would be reallocated during an RCU read-side critical section. Of course, that is not the case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire slab of blocks. However, there is a phrase for this, namely "type safety". This commit therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order to avoid future instances of this sort of confusion. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <linux-mm@kvack.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> [ paulmck: Add comments mentioning the old name, as requested by Eric Dumazet, in order to help people familiar with the old name find the new one. ] Acked-by: David Rientjes <rientjes@google.com>
2017-03-31kasan: report only the first error by defaultMark Rutland2-5/+36
Disable kasan after the first report. There are several reasons for this: - Single bug quite often has multiple invalid memory accesses causing storm in the dmesg. - Write OOB access might corrupt metadata so the next report will print bogus alloc/free stacktraces. - Reports after the first easily could be not bugs by itself but just side effects of the first one. Given that multiple reports usually only do harm, it makes sense to disable kasan after the first one. If user wants to see all the reports, the boot-time parameter kasan_multi_shot must be used. [aryabinin@virtuozzo.com: wrote changelog and doc, added missing include] Link: http://lkml.kernel.org/r/20170323154416.30257-1-aryabinin@virtuozzo.com Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-10Merge branch 'prep-for-5level'Linus Torvalds1-5/+39
Merge 5-level page table prep from Kirill Shutemov: "Here's relatively low-risk part of 5-level paging patchset. Merging it now will make x86 5-level paging enabling in v4.12 easier. The first patch is actually x86-specific: detect 5-level paging support. It boils down to single define. The rest of patchset converts Linux MMU abstraction from 4- to 5-level paging. Enabling of new abstraction in most cases requires adding single line of code in arch-specific code. The rest is taken care by asm-generic/. Changes to mm/ code are mostly mechanical: add support for new page table level -- p4d_t -- where we deal with pud_t now. v2: - fix build on microblaze (Michal); - comment for __ARCH_HAS_5LEVEL_HACK in kasan_populate_zero_shadow(); - acks from Michal" * emailed patches from Kirill A Shutemov <kirill.shutemov@linux.intel.com>: mm: introduce __p4d_alloc() mm: convert generic code to 5-level paging asm-generic: introduce <asm-generic/pgtable-nop4d.h> arch, mm: convert all architectures to use 5level-fixup.h asm-generic: introduce __ARCH_USE_5LEVEL_HACK asm-generic: introduce 5level-fixup.h x86/cpufeature: Add 5-level paging detection
2017-03-09kasan: fix races in quarantine_remove_cache()Dmitry Vyukov1-6/+36
quarantine_remove_cache() frees all pending objects that belong to the cache, before we destroy the cache itself. However there are currently two possibilities how it can fail to do so. First, another thread can hold some of the objects from the cache in temp list in quarantine_put(). quarantine_put() has a windows of enabled interrupts, and on_each_cpu() in quarantine_remove_cache() can finish right in that window. These objects will be later freed into the destroyed cache. Then, quarantine_reduce() has the same problem. It grabs a batch of objects from the global quarantine, then unlocks quarantine_lock and then frees the batch. quarantine_remove_cache() can finish while some objects from the cache are still in the local to_free list in quarantine_reduce(). Fix the race with quarantine_put() by disabling interrupts for the whole duration of quarantine_put(). In combination with on_each_cpu() in quarantine_remove_cache() it ensures that quarantine_remove_cache() either sees the objects in the per-cpu list or in the global list. Fix the race with quarantine_reduce() by protecting quarantine_reduce() with srcu critical section and then doing synchronize_srcu() at the end of quarantine_remove_cache(). I've done some assessment of how good synchronize_srcu() works in this case. And on a 4 CPU VM I see that it blocks waiting for pending read critical sections in about 2-3% of cases. Which looks good to me. I suspect that these races are the root cause of some GPFs that I episodically hit. Previously I did not have any explanation for them. BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 IP: qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155 PGD 6aeea067 PUD 60ed7067 PMD 0 Oops: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 13667 Comm: syz-executor2 Not tainted 4.10.0+ #60 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88005f948040 task.stack: ffff880069818000 RIP: 0010:qlist_free_all+0x2e/0xc0 mm/kasan/quarantine.c:155 RSP: 0018:ffff88006981f298 EFLAGS: 00010246 RAX: ffffea0000ffff00 RBX: 0000000000000000 RCX: ffffea0000ffff1f RDX: 0000000000000000 RSI: ffff88003fffc3e0 RDI: 0000000000000000 RBP: ffff88006981f2c0 R08: ffff88002fed7bd8 R09: 00000001001f000d R10: 00000000001f000d R11: ffff88006981f000 R12: ffff88003fffc3e0 R13: ffff88006981f2d0 R14: ffffffff81877fae R15: 0000000080000000 FS: 00007fb911a2d700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c8 CR3: 0000000060ed6000 CR4: 00000000000006f0 Call Trace: quarantine_reduce+0x10e/0x120 mm/kasan/quarantine.c:239 kasan_kmalloc+0xca/0xe0 mm/kasan/kasan.c:590 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:544 slab_post_alloc_hook mm/slab.h:456 [inline] slab_alloc_node mm/slub.c:2718 [inline] kmem_cache_alloc_node+0x1d3/0x280 mm/slub.c:2754 __alloc_skb+0x10f/0x770 net/core/skbuff.c:219 alloc_skb include/linux/skbuff.h:932 [inline] _sctp_make_chunk+0x3b/0x260 net/sctp/sm_make_chunk.c:1388 sctp_make_data net/sctp/sm_make_chunk.c:1420 [inline] sctp_make_datafrag_empty+0x208/0x360 net/sctp/sm_make_chunk.c:746 sctp_datamsg_from_user+0x7e8/0x11d0 net/sctp/chunk.c:266 sctp_sendmsg+0x2611/0x3970 net/sctp/socket.c:1962 inet_sendmsg+0x164/0x5b0 net/ipv4/af_inet.c:761 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x660/0x810 net/socket.c:1685 SyS_sendto+0x40/0x50 net/socket.c:1653 I am not sure about backporting. The bug is quite hard to trigger, I've seen it few times during our massive continuous testing (however, it could be cause of some other episodic stray crashes as it leads to memory corruption...). If it is triggered, the consequences are very bad -- almost definite bad memory corruption. The fix is non trivial and has chances of introducing new bugs. I am also not sure how actively people use KASAN on older releases. [dvyukov@google.com: - sorted includes[ Link: http://lkml.kernel.org/r/20170309094028.51088-1-dvyukov@google.com Link: http://lkml.kernel.org/r/20170308151532.5070-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09kasan: resched in quarantine_remove_cache()Dmitry Vyukov1-1/+8
We see reported stalls/lockups in quarantine_remove_cache() on machines with large amounts of RAM. quarantine_remove_cache() needs to scan whole quarantine in order to take out all objects belonging to the cache. Quarantine is currently 1/32-th of RAM, e.g. on a machine with 256GB of memory that will be 8GB. Moreover quarantine scanning is a walk over uncached linked list, which is slow. Add cond_resched() after scanning of each non-empty batch of objects. Batches are specifically kept of reasonable size for quarantine_put(). On a machine with 256GB of RAM we should have ~512 non-empty batches, each with 16MB of objects. Link: http://lkml.kernel.org/r/20170308154239.25440-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Greg Thelen <gthelen@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09mm: convert generic code to 5-level pagingKirill A. Shutemov1-5/+39
Convert all non-architecture-specific code to 5-level paging. It's mostly mechanical adding handling one more page table level in places where we deal with pud_t. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02kasan, sched/headers: Uninline kasan_enable/disable_current()Ingo Molnar1-0/+10
<linux/kasan.h> is a low level header that is included early in affected kernel headers. But it includes <linux/sched.h> which complicates the cleanup of sched.h dependencies. But kasan.h has almost no need for sched.h: its only use of scheduler functionality is in two inline functions which are not used very frequently - so uninline kasan_enable_current() and kasan_disable_current(). Also add a <linux/sched.h> dependency to a .c file that depended on kasan.h including it. This paves the way to remove the <linux/sched.h> include from kasan.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-24kasan: drain quarantine of memcg slab objectsGreg Thelen2-1/+2
Per memcg slab accounting and kasan have a problem with kmem_cache destruction. - kmem_cache_create() allocates a kmem_cache, which is used for allocations from processes running in root (top) memcg. - Processes running in non root memcg and allocating with either __GFP_ACCOUNT or from a SLAB_ACCOUNT cache use a per memcg kmem_cache. - Kasan catches use-after-free by having kfree() and kmem_cache_free() defer freeing of objects. Objects are placed in a quarantine. - kmem_cache_destroy() destroys root and non root kmem_caches. It takes care to drain the quarantine of objects from the root memcg's kmem_cache, but ignores objects associated with non root memcg. This causes leaks because quarantined per memcg objects refer to per memcg kmem cache being destroyed. To see the problem: 1) create a slab cache with kmem_cache_create(,,,SLAB_ACCOUNT,) 2) from non root memcg, allocate and free a few objects from cache 3) dispose of the cache with kmem_cache_destroy() kmem_cache_destroy() will trigger a "Slab cache still has objects" warning indicating that the per memcg kmem_cache structure was leaked. Fix the leak by draining kasan quarantined objects allocated from non root memcg. Racing memcg deletion is tricky, but handled. kmem_cache_destroy() => shutdown_memcg_caches() => __shutdown_memcg_cache() => shutdown_cache() flushes per memcg quarantined objects, even if that memcg has been rmdir'd and gone through memcg_deactivate_kmem_caches(). This leak only affects destroyed SLAB_ACCOUNT kmem caches when kasan is enabled. So I don't think it's worth patching stable kernels. Link: http://lkml.kernel.org/r/1482257462-36948-1-git-send-email-gthelen@google.com Signed-off-by: Greg Thelen <gthelen@google.com> Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22Merge tag 'arm64-upstream' of ↵Linus Torvalds1-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: - Errata workarounds for Qualcomm's Falkor CPU - Qualcomm L2 Cache PMU driver - Qualcomm SMCCC firmware quirk - Support for DEBUG_VIRTUAL - CPU feature detection for userspace via MRS emulation - Preliminary work for the Statistical Profiling Extension - Misc cleanups and non-critical fixes * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (74 commits) arm64/kprobes: consistently handle MRS/MSR with XZR arm64: cpufeature: correctly handle MRS to XZR arm64: traps: correctly handle MRS/MSR with XZR arm64: ptrace: add XZR-safe regs accessors arm64: include asm/assembler.h in entry-ftrace.S arm64: fix warning about swapper_pg_dir overflow arm64: Work around Falkor erratum 1003 arm64: head.S: Enable EL1 (host) access to SPE when entered at EL2 arm64: arch_timer: document Hisilicon erratum 161010101 arm64: use is_vmalloc_addr arm64: use linux/sizes.h for constants arm64: uaccess: consistently check object sizes perf: add qcom l2 cache perf events driver arm64: remove wrong CONFIG_PROC_SYSCTL ifdef ARM: smccc: Update HVC comment to describe new quirk parameter arm64: do not trace atomic operations ACPI/IORT: Fix the error return code in iort_add_smmu_platform_device() ACPI/IORT: Fix iort_node_get_id() mapping entries indexing arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA perf: xgene: Include module.h ...
2017-02-03kasan: respect /proc/sys/kernel/traceoff_on_warningPeter Zijlstra1-0/+3
After much waiting I finally reproduced a KASAN issue, only to find my trace-buffer empty of useful information because it got spooled out :/ Make kasan_report honour the /proc/sys/kernel/traceoff_on_warning interface. Link: http://lkml.kernel.org/r/20170125164106.3514-1-aryabinin@virtuozzo.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>