Age | Commit message (Collapse) | Author | Files | Lines |
|
In the DAMON, the minimum wait time of the schemes decides whether the
kernel wakes up 'kdamon_fn()'. But since the minimum wait time is
initialized to zero, there are corner cases against the original
objective.
For example, if we have several schemes for one target, and if the wait
time of the first scheme is zero, the minimum wait time will set zero,
which means 'kdamond_fn()' should wake up to apply this scheme.
However, in the following scheme, wait time can be set to non-zero.
Thus, the mininum wait time will be set to non-zero, which can cause
sleeping this interval for 'kdamon_fn()' due to one deactivated last
scheme.
This commit prevents making DAMON monitoring inactive state due to other
deactivated schemes.
Link: https://lkml.kernel.org/r/20220330105302.32114-1-tome01@ajou.ac.kr
Signed-off-by: Jonghyeon Kim <tome01@ajou.ac.kr>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull folio updates from Matthew Wilcox:
- Rewrite how munlock works to massively reduce the contention on
i_mmap_rwsem (Hugh Dickins):
https://lore.kernel.org/linux-mm/8e4356d-9622-a7f0-b2c-f116b5f2efea@google.com/
- Sort out the page refcount mess for ZONE_DEVICE pages (Christoph
Hellwig):
https://lore.kernel.org/linux-mm/20220210072828.2930359-1-hch@lst.de/
- Convert GUP to use folios and make pincount available for order-1
pages. (Matthew Wilcox)
- Convert a few more truncation functions to use folios (Matthew
Wilcox)
- Convert page_vma_mapped_walk to use PFNs instead of pages (Matthew
Wilcox)
- Convert rmap_walk to use folios (Matthew Wilcox)
- Convert most of shrink_page_list() to use a folio (Matthew Wilcox)
- Add support for creating large folios in readahead (Matthew Wilcox)
* tag 'folio-5.18c' of git://git.infradead.org/users/willy/pagecache: (114 commits)
mm/damon: minor cleanup for damon_pa_young
selftests/vm/transhuge-stress: Support file-backed PMD folios
mm/filemap: Support VM_HUGEPAGE for file mappings
mm/readahead: Switch to page_cache_ra_order
mm/readahead: Align file mappings for non-DAX
mm/readahead: Add large folio readahead
mm: Support arbitrary THP sizes
mm: Make large folios depend on THP
mm: Fix READ_ONLY_THP warning
mm/filemap: Allow large folios to be added to the page cache
mm: Turn can_split_huge_page() into can_split_folio()
mm/vmscan: Convert pageout() to take a folio
mm/vmscan: Turn page_check_references() into folio_check_references()
mm/vmscan: Account large folios correctly
mm/vmscan: Optimise shrink_page_list for non-PMD-sized folios
mm/vmscan: Free non-shmem folios without splitting them
mm/rmap: Constify the rmap_walk_control argument
mm/rmap: Convert rmap_walk() to take a folio
mm: Turn page_anon_vma() into folio_anon_vma()
mm/rmap: Turn page_lock_anon_vma_read() into folio_lock_anon_vma_read()
...
|
|
In damon_sysfs_kdamond_release(), we have use container_of() to get
"kdamond" pointer, so there no need to get it once again.
Link: https://lkml.kernel.org/r/20220303075314.22502-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON sysfs interface supports the DAMOS stats feature.
Specifically, this commit adds 'stats' directory under each scheme
directory, and update the contents of the files under the directory
according to the latest monitoring results, when the user writes special
keyword, 'update_schemes_stats' to the 'state' file of the kdamond.
As a result, the files hierarchy becomes as below:
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr_schemes
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ quotas/ms,sz,reset_interval_ms
│ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low
│ │ │ │ │ │ │ stats/ <- NEW DIRECTORY
│ │ │ │ │ │ │ │ nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Link: https://lkml.kernel.org/r/20220228081314.5770-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON sysfs interface supports the DAMOS watermarks
feature. Specifically, this commit adds 'watermarks' directory under each
scheme directory and makes kdamond 'state' file writing respects the
contents in the directory.
As a result, the files hierarchy becomes as below:
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr_schemes
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ quotas/ms,sz,reset_interval_ms
│ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ │ watermarks/ <- NEW DIRECTORY
│ │ │ │ │ │ │ │ metric,interval_us,high,mid,lo
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
[sj@kernel.org: fix out-of-bound array access for wmark_metric_strs[]]
Link: https://lkml.kernel.org/r/20220301185619.2904-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220228081314.5770-10-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON sysfs interface supports the DAMOS' regions
prioritization weights feature under quotas limitation. Specifically,
this commit adds 'weights' directory under each scheme directory and makes
kdamond 'state' file writing respects the contents in the directory.
/sys/kernel/mm/damon/admin
│ kdamonds/nr
│ │ 0/state,pid
│ │ │ contexts/nr
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr
│ │ │ │ │ │ 0/pid
│ │ │ │ │ │ │ regions/nr
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms
│ │ │ │ │ │ │ │ weights/ <- NEW DIRECTORY
│ │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Link: https://lkml.kernel.org/r/20220228081314.5770-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON sysfs interface supports the DAMOS quotas feature.
Specifically, this commit adds 'quotas' directory under each scheme
directory and makes kdamond 'state' file writing respects the contents in
the directory.
As a result, the files hierarchy becomes as below:
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr_schemes
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms <- NEW DIRECTORY
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Link: https://lkml.kernel.org/r/20220228081314.5770-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON sysfs interface supports the DAMON-based operation
schemes (DAMOS) feature. Specifically, this commit adds 'schemes'
directory under each context direcotry, and makes kdamond 'state' file
writing respects the contents in the directory.
Note that this commit doesn't support all features of DAMOS but only the
target access pattern and action feature. Supports for quotas,
prioritization, watermarks will follow.
As a result, the files hierarchy becomes as below:
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr_schemes <- NEW DIRECTORY
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Link: https://lkml.kernel.org/r/20220228081314.5770-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON sysfs interface supports the physical address
space monitoring. Specifically, this commit adds support of the initial
monitoring regions set feature by adding 'regions' directory under each
target directory and makes context operations file to receive 'paddr' in
addition to 'vaddr'.
As a result, the files hierarchy becomes as below:
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions <- NEW DIRECTORY
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Link: https://lkml.kernel.org/r/20220228081314.5770-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit links the DAMON sysfs interface to DAMON so that users can
control DAMON via the interface. In detail, this commit makes writing
'on' to 'state' file constructs DAMON contexts based on values that users
have written to relevant sysfs files and start the context. It supports
only virtual address spaces monitoring at the moment, though.
The files hierarchy of DAMON sysfs interface after this commit is shown
below. In the below figure, parents-children relations are represented
with indentations, each directory is having ``/`` suffix, and files in
each directory are separated by comma (",").
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
The usage is straightforward. Writing a number ('N') to each 'nr_*' file
makes directories named '0' to 'N-1'. Users can construct DAMON contexts
by writing proper values to the files in the straightforward manner and
start each kdamond by writing 'on' to 'kdamonds/<N>/state'.
Link: https://lkml.kernel.org/r/20220228081314.5770-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON's debugfs-based user interface served very well, so far. However,
it unnecessarily depends on debugfs, while DAMON is not aimed to be used
for only debugging. Also, the interface receives multiple values via one
file. For example, schemes file receives 18 values separated by white
spaces. As a result, it is ineffient, hard to be used, and difficult to
be extended. Especially, keeping backward compatibility of user space
tools is getting only challenging. It would be better to implement
another reliable and flexible interface and deprecate the debugfs
interface in long term.
To this end, this commit implements a stub of a part of the new user
interface of DAMON using sysfs. Specifically, this commit implements the
sysfs control parts for virtual address space monitoring.
More specifically, the idea of the new interface is, using directory
hierarchies and making one file for one value. The hierarchy that this
commit is introducing is as below. In the below figure, parents-children
relations are represented with indentations, each directory is having
``/`` suffix, and files in each directory are separated by comma (",").
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Writing a number <N> to each 'nr' file makes directories of name <0> to
<N-1> in the directory of the 'nr' file. That's all this commit does.
Writing proper values to relevant files will construct the DAMON contexts,
and writing a special keyword, 'on', to 'state' files for each kdamond
will ask DAMON to start the constructed contexts.
For a short example, using below commands for monitoring virtual address
spaces of a given workload is imaginable:
# cd /sys/kernel/mm/damon/admin/
# echo 1 > kdamonds/nr_kdamonds
# echo 1 > kdamonds/0/contexts/nr_contexts
# echo vaddr > kdamonds/0/contexts/0/operations
# echo 1 > kdamonds/0/contexts/0/targets/nr_targets
# echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target
# echo on > kdamonds/0/state
Please note that this commit is implementing only the sysfs part stub as
abovely mentioned. This commit doesn't implement the special keywords for
'state' files. Following commits will do that.
[jiapeng.chong@linux.alibaba.com: fix missing error code in damon_sysfs_attrs_add_dirs()]
Link: https://lkml.kernel.org/r/20220302111120.24984-1-jiapeng.chong@linux.alibaba.com
Link: https://lkml.kernel.org/r/20220228081314.5770-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Introduce DAMON sysfs interface", v3.
Introduction
============
DAMON's debugfs-based user interface (DAMON_DBGFS) served very well, so
far. However, it unnecessarily depends on debugfs, while DAMON is not
aimed to be used for only debugging. Also, the interface receives
multiple values via one file. For example, schemes file receives 18
values. As a result, it is inefficient, hard to be used, and difficult to
be extended. Especially, keeping backward compatibility of user space
tools is getting only challenging. It would be better to implement
another reliable and flexible interface and deprecate DAMON_DBGFS in long
term.
For the reason, this patchset introduces a sysfs-based new user interface
of DAMON. The idea of the new interface is, using directory hierarchies
and having one dedicated file for each value. For a short example, users
can do the virtual address monitoring via the interface as below:
# cd /sys/kernel/mm/damon/admin/
# echo 1 > kdamonds/nr_kdamonds
# echo 1 > kdamonds/0/contexts/nr_contexts
# echo vaddr > kdamonds/0/contexts/0/operations
# echo 1 > kdamonds/0/contexts/0/targets/nr_targets
# echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target
# echo on > kdamonds/0/state
A brief representation of the files hierarchy of DAMON sysfs interface is
as below. Childs are represented with indentation, directories are having
'/' suffix, and files in each directory are separated by comma.
/sys/kernel/mm/damon/admin
│ kdamonds/nr_kdamonds
│ │ 0/state,pid
│ │ │ contexts/nr_contexts
│ │ │ │ 0/operations
│ │ │ │ │ monitoring_attrs/
│ │ │ │ │ │ intervals/sample_us,aggr_us,update_us
│ │ │ │ │ │ nr_regions/min,max
│ │ │ │ │ targets/nr_targets
│ │ │ │ │ │ 0/pid_target
│ │ │ │ │ │ │ regions/nr_regions
│ │ │ │ │ │ │ │ 0/start,end
│ │ │ │ │ │ │ │ ...
│ │ │ │ │ │ ...
│ │ │ │ │ schemes/nr_schemes
│ │ │ │ │ │ 0/action
│ │ │ │ │ │ │ access_pattern/
│ │ │ │ │ │ │ │ sz/min,max
│ │ │ │ │ │ │ │ nr_accesses/min,max
│ │ │ │ │ │ │ │ age/min,max
│ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms
│ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil
│ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low
│ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds
│ │ │ │ │ │ ...
│ │ │ │ ...
│ │ ...
Detailed usage of the files will be described in the final Documentation
patch of this patchset.
Main Difference Between DAMON_DBGFS and DAMON_SYSFS
---------------------------------------------------
At the moment, DAMON_DBGFS and DAMON_SYSFS provides same features. One
important difference between them is their exclusiveness. DAMON_DBGFS
works in an exclusive manner, so that no DAMON worker thread (kdamond) in
the system can run concurrently and interfere somehow. For the reason,
DAMON_DBGFS asks users to construct all monitoring contexts and start them
at once. It's not a big problem but makes the operation a little bit
complex and unflexible.
For more flexible usage, DAMON_SYSFS moves the responsibility of
preventing any possible interference to the admins and work in a
non-exclusive manner. That is, users can configure and start contexts one
by one. Note that DAMON respects both exclusive groups and non-exclusive
groups of contexts, in a manner similar to that of reader-writer locks.
That is, if any exclusive monitoring contexts (e.g., contexts that started
via DAMON_DBGFS) are running, DAMON_SYSFS does not start new contexts, and
vice versa.
Future Plan of DAMON_DBGFS Deprecation
======================================
Once this patchset is merged, DAMON_DBGFS development will be frozen.
That is, we will maintain it to work as is now so that no users will be
break. But, it will not be extended to provide any new feature of DAMON.
The support will be continued only until next LTS release. After that, we
will drop DAMON_DBGFS.
User-space Tooling Compatibility
--------------------------------
As DAMON_SYSFS provides all features of DAMON_DBGFS, all user space
tooling can move to DAMON_SYSFS. As we will continue supporting
DAMON_DBGFS until next LTS kernel release, user space tools would have
enough time to move to DAMON_SYSFS.
The official user space tool, damo[1], is already supporting both
DAMON_SYSFS and DAMON_DBGFS. Both correctness tests[2] and performance
tests[3] of DAMON using DAMON_SYSFS also passed.
[1] https://github.com/awslabs/damo
[2] https://github.com/awslabs/damon-tests/tree/master/corr
[3] https://github.com/awslabs/damon-tests/tree/master/perf
Sequence of Patches
===================
First two patches (patches 1-2) make core changes for DAMON_SYSFS. The
first one (patch 1) allows non-exclusive DAMON contexts so that
DAMON_SYSFS can work in non-exclusive mode, while the second one (patch 2)
adds size of DAMON enum types so that DAMON API users can safely iterate
the enums.
Third patch (patch 3) implements basic sysfs stub for virtual address
spaces monitoring. Note that this implements only sysfs files and DAMON
is not linked. Fourth patch (patch 4) links the DAMON_SYSFS to DAMON so
that users can control DAMON using the sysfs files.
Following six patches (patches 5-10) implements other DAMON features that
DAMON_DBGFS supports one by one (physical address space monitoring,
DAMON-based operation schemes, schemes quotas, schemes prioritization
weights, schemes watermarks, and schemes stats).
Following patch (patch 11) adds a simple selftest for DAMON_SYSFS, and the
final one (patch 12) documents DAMON_SYSFS.
This patch (of 13):
To avoid interference between DAMON contexts monitoring overlapping memory
regions, damon_start() works in an exclusive manner. That is,
damon_start() does nothing bug fails if any context that started by
another instance of the function is still running. This makes its usage a
little bit restrictive. However, admins could aware each DAMON usage and
address such interferences on their own in some cases.
This commit hence implements non-exclusive mode of the function and allows
the callers to select the mode. Note that the exclusive groups and
non-exclusive groups of contexts will respect each other in a manner
similar to that of reader-writer locks. Therefore, this commit will not
cause any behavioral change to the exclusive groups.
Link: https://lkml.kernel.org/r/20220228081314.5770-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220228081314.5770-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In mm/Makefile has:
obj-$(CONFIG_DAMON) += damon/
So that we don't need 'obj-$(CONFIG_DAMON) :=' in mm/damon/Makefile,
delete it from mm/damon/Makefile.
Link: https://lkml.kernel.org/r/20220221065255.19991-1-tangmeng@uniontech.com
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Because DAMON debugfs interface and DAMON-based proactive reclaim are now
using monitoring operations via registration mechanism,
damon_{p,v}a_{target_valid,set_operations}() functions have no user. This
commit clean them up.
Link: https://lkml.kernel.org/r/20220215184603.1479-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON kunit tests for DAMON debugfs interface fails because it still
assumes setting empty monitoring operations makes DAMON debugfs interface
believe the target of the context don't have pid. This commit fixes the
kunit test fails by explicitly setting the context's monitoring operations
with the operations for the physical address space, which let debugfs
knows the target will not have pid.
Link: https://lkml.kernel.org/r/20220215184603.1479-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs interface depends on monitoring operations for virtual
address spaces because it knows if the target has pid or not by seeing if
the context is configured to use one of the virtual address space
monitoring operation functions. We can replace that check with 'enum
damon_ops_id' now, to make it independent. This commit makes the change.
Link: https://lkml.kernel.org/r/20220215184603.1479-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes DAMON debugfs interface to select the registered
monitoring operations for the physical address space or virtual address
spaces depending on user requests instead of setting it on its own. Note
that DAMON debugfs interface is still dependent to DAMON_VADDR with this
change, because it is also using its symbol, 'damon_va_target_valid'.
Link: https://lkml.kernel.org/r/20220215184603.1479-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
damon_{v,p}a_set_operations()
This commit makes DAMON_RECLAIM to select the registered monitoring
operations for the physical address space instead of setting it on its
own. This allows DAMON_RECLAIM be independent of DAMON_PADDR, but leave
the dependency as is, because it's the only one monitoring operations it
use, and therefore it makes no sense to build DAMON_RECLAIM without
DAMON_PADDR.
Link: https://lkml.kernel.org/r/20220215184603.1479-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This commit makes the monitoring operations for the physical address space
and virtual address spaces register themselves to DAMON in the
subsys_initcall step. Later, in-kernel DAMON user code can use them via
damon_select_ops() without have to unnecessarily depend on all possible
monitoring operations implementations.
Link: https://lkml.kernel.org/r/20220215184603.1479-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In-kernel DAMON user code like DAMON debugfs interface should set 'struct
damon_operations' of its 'struct damon_ctx' on its own. Therefore, the
client code should depend on all supporting monitoring operations
implementations that it could use. For example, DAMON debugfs interface
depends on both vaddr and paddr, while some of the users are not always
interested in both.
To minimize such unnecessary dependencies, this commit makes the
monitoring operations can be registered by implementing code and then
dynamically selected by the user code without build-time dependency.
Link: https://lkml.kernel.org/r/20220215184603.1479-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Allow DAMON user code independent of monitoring primitives".
In-kernel DAMON user code is required to configure the monitoring context
(struct damon_ctx) with proper monitoring primitives (struct
damon_primitive). This makes the user code dependent to all supporting
monitoring primitives. For example, DAMON debugfs interface depends on
both DAMON_VADDR and DAMON_PADDR, though some users have interest in only
one use case. As more monitoring primitives are introduced, the problem
will be bigger.
To minimize such unnecessary dependency, this patchset makes monitoring
primitives can be registered by the implemnting code and later dynamically
searched and selected by the user code.
In addition to that, this patchset renames monitoring primitives to
monitoring operations, which is more easy to intuitively understand what
it means and how it would be structed.
This patch (of 8):
DAMON has a set of callback functions called monitoring primitives and let
it can be configured with various implementations for easy extension for
different address spaces and usages. However, the word 'primitive' is not
so explicit. Meanwhile, many other structs resembles similar purpose
calls themselves 'operations'. To make the code easier to be understood,
this commit renames 'damon_primitives' to 'damon_operations' before it is
too late to rename.
Link: https://lkml.kernel.org/r/20220215184603.1479-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220215184603.1479-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Xin Hao <xhao@linux.alibaba.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It will never get a NULL page by pte_page() as discussed in thread [1],
thus remove the redundant page validation to fix below Smatch static
checker warning.
mm/damon/vaddr.c:405 damon_hugetlb_mkold()
warn: 'page' can't be NULL.
[1] https://lore.kernel.org/linux-mm/20220106091200.GA14564@kili/
Link: https://lkml.kernel.org/r/6d32f7d201b8970d53f51b6c5717d472aed2987c.1642386715.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON asks each monitoring target ('struct damon_target') to have one
'unsigned long' integer called 'id', which should be unique among the
targets of same monitoring context. Meaning of it is, however, totally up
to the monitoring primitives that registered to the monitoring context.
For example, the virtual address spaces monitoring primitives treats the
id as a 'struct pid' pointer.
This makes the code flexible, but ugly, not well-documented, and
type-unsafe[1]. Also, identification of each target can be done via its
index. For the reason, this commit removes the concept and uses clear
type definition. For now, only 'struct pid' pointer is used for the
virtual address spaces monitoring. If DAMON is extended in future so that
we need to put another identifier field in the struct, we will use a union
for such primitives-dependent fields and document which primitives are
using which type.
[1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/
Link: https://lkml.kernel.org/r/20211230100723.2238-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
damon_set_targets() function is defined in the core for general use cases,
but called from only dbgfs. Also, because the function is for general use
cases, dbgfs does additional handling of pid type target id case. To make
the situation simpler, this commit moves the function into dbgfs and makes
it to do the pid type case handling on its own.
Link: https://lkml.kernel.org/r/20211230100723.2238-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Remove the type-unclear target id concept".
DAMON asks each monitoring target ('struct damon_target') to have one
'unsigned long' integer called 'id', which should be unique among the
targets of same monitoring context. Meaning of it is, however, totally up
to the monitoring primitives that registered to the monitoring context.
For example, the virtual address spaces monitoring primitives treats the
id as a 'struct pid' pointer.
This makes the code flexible but ugly, not well-documented, and
type-unsafe[1]. Also, identification of each target can be done via its
index. For the reason, this patchset removes the concept and uses clear
type definition.
[1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/
This patch (of 4):
Target id is a 'unsigned long' data, which can be interpreted differently
by each monitoring primitives. For example, it means 'struct pid *' for
the virtual address spaces monitoring, while it means nothing but an
integer to be displayed to debugfs interface users for the physical
address space monitoring. It's flexible but makes code ugly and
type-unsafe[1].
To be prepared for eventual removal of the concept, this commit removes a
use case of the concept in 'init_regions' debugfs file handling. In
detail, this commit replaces use of the id with the index of each target
in the context's targets list.
[1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/
Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
if need_lock is true but folio_trylock fails, we should return false
instead of NULL to match the return value type exactly. No functional
change intended.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
This ripples all the way through to every calling and called function
from rmap.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Ensure that we're passing the entire folio to rmap_walk().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Ensure that we're passing the entire folio to rmap_walk().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
Instead of declaring a struct page_vma_mapped_walk directly,
use these helpers to allow us to transition to a PFN approach in the
following patches.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
|
|
DAMON's virtual address spaces monitoring primitive uses 'struct pid *'
of the target process as its monitoring target id. The kernel address
is exposed as-is to the user space via the DAMON tracepoint,
'damon_aggregated'.
Though primarily only privileged users are allowed to access that, it
would be better to avoid unnecessarily exposing kernel pointers so.
Because the trace result is only required to be able to distinguish each
target, we aren't need to use the pointer as-is.
This makes the tracepoint to use the index of the target in the
context's targets list as its id in the tracepoint, to hide the kernel
space address.
Link: https://lkml.kernel.org/r/20211229131016.23641-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The failure log message for 'damon_va_three_regions()' prints the target
id, which is a 'struct pid' pointer in the case. To avoid exposing the
kernel pointer via the log, this makes the log to use the index of the
target in the context's targets list instead.
Link: https://lkml.kernel.org/r/20211229131016.23641-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Failure of 'damon_va_three_regions()' is logged using 'pr_err()'. But,
the function can fail in legal situations. To avoid making users be
surprised and to keep the kernel clean, this makes the log to be printed
using 'pr_debug()'.
Link: https://lkml.kernel.org/r/20211229131016.23641-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/damon: Hide unnecessary information disclosures".
DAMON is exposing some unnecessary information including kernel pointer
in kernel log and tracepoint. This patchset hides such information.
The first patch is only for a trivial cleanup, though.
This patch (of 4):
This commit removes a unnecessarily used variable in
dbgfs_target_ids_write().
Link: https://lkml.kernel.org/r/20211229131016.23641-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211229131016.23641-2-sj@kernel.org
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Usually, inline function is declared static since it should sit between
storage and type. And implement it in a header file if used by multiple
files.
And this change also fixes compile issue when backport damon to 5.10.
mm/damon/vaddr.c: In function `damon_va_evenly_split_region':
./include/linux/damon.h:425:13: error: inlining failed in call to `always_inline' `damon_insert_region': function body not available
425 | inline void damon_insert_region(struct damon_region *r,
| ^~~~~~~~~~~~~~~~~~~
mm/damon/vaddr.c:86:3: note: called from here
86 | damon_insert_region(n, r, next, t);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Link: https://lkml.kernel.org/r/20211223085703.6142-1-guoqing.jiang@linux.dev
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The process's VMAs can be mapped by hugetlb page, but now the DAMON did
not implement the access checking for hugetlb pte, so we can not get the
actual access count like below if a process VMAs were mapped by hugetlb.
damon_aggregated: target_id=18446614368406014464 nr_regions=12 4194304-5476352: 0 545
damon_aggregated: target_id=18446614368406014464 nr_regions=12 140662370467840-140662372970496: 0 545
damon_aggregated: target_id=18446614368406014464 nr_regions=12 140662372970496-140662375460864: 0 545
damon_aggregated: target_id=18446614368406014464 nr_regions=12 140662375460864-140662377951232: 0 545
damon_aggregated: target_id=18446614368406014464 nr_regions=12 140662377951232-140662380449792: 0 545
damon_aggregated: target_id=18446614368406014464 nr_regions=12 140662380449792-140662382944256: 0 545
......
Thus this patch adds hugetlb access checking support, with this patch we
can see below VMA mapped by hugetlb access count.
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296486649856-140296489914368: 1 3
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296489914368-140296492978176: 1 3
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296492978176-140296495439872: 1 3
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296495439872-140296498311168: 1 3
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296498311168-140296501198848: 1 3
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296501198848-140296504320000: 1 3
damon_aggregated: target_id=18446613056935405824 nr_regions=12 140296504320000-140296507568128: 1 2
......
[baolin.wang@linux.alibaba.com: fix unused var warning]
Link: https://lkml.kernel.org/r/1aaf9c11-0d8e-b92d-5c92-46e50a6e8d4e@linux.alibaba.com
[baolin.wang@linux.alibaba.com: v3]
Link: https://lkml.kernel.org/r/486927ecaaaecf2e3a7fbe0378ec6e1c58b50747.1640852276.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/6afcbd1fda5f9c7c24f320d26a98188c727ceec3.1639623751.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently, DAMON debugfs interface is not supporting DAMON-based
Operation Schemes (DAMOS) stats for schemes successfully applied regions
and time/space quota limit exceeds. This adds the support.
Link: https://lkml.kernel.org/r/20211210150016.35349-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This implements new DAMON_RECLAIM parameters for statistics reporting.
Those can be used for understanding how DAMON_RECLAIM is working, and
for tuning the other parameters.
Link: https://lkml.kernel.org/r/20211210150016.35349-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the time/space quotas of a given DAMON-based operation scheme is too
small, the scheme could show unexpectedly slow progress. However, there
is no good way to notice the case in runtime. This commit extends the
DAMOS stat to provide how many times the quota limits exceeded so that
the users can easily notice the case and tune the scheme.
Link: https://lkml.kernel.org/r/20211210150016.35349-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/damon/schemes: Extend stats for better online analysis and tuning".
To help online access pattern analysis and tuning of DAMON-based
Operation Schemes (DAMOS), DAMOS provides simple statistics for each
scheme. Introduction of DAMOS time/space quota further made the tuning
easier by making the risk management easier. However, that also made
understanding of the working schemes a little bit more difficult.
For an example, progress of a given scheme can now be throttled by not
only the aggressiveness of the target access pattern, but also the
time/space quotas. So, when a scheme is showing unexpectedly slow
progress, it's difficult to know by what the progress of the scheme is
throttled, with currently provided statistics.
This patchset extends the statistics to contain some metrics that can be
helpful for such online schemes analysis and tuning (patches 1-2),
exports those to users (patches 3 and 5), and add documents (patches 4
and 6).
This patch (of 6):
DAMON-based operation schemes (DAMOS) stats provide only the number and
the amount of regions that the action of the scheme has tried to be
applied. Because the action could be failed for some reasons, the
currently provided information is sometimes not useful or convenient
enough for schemes profiling and tuning. To improve this situation,
this commit extends the DAMOS stats to provide the number and the amount
of regions that the action has successfully applied.
Link: https://lkml.kernel.org/r/20211210150016.35349-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211210150016.35349-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/damon: Misc cleanups".
This patchset contains miscellaneous cleanups for DAMON's macro
functions and documentation.
This patch (of 6):
This commit converts macro functions in DAMON to static inline functions,
for better type checking, code documentation, etc[1].
[1] https://lore.kernel.org/linux-mm/20211202151213.6ec830863342220da4141bc5@linux-foundation.org/
Link: https://lkml.kernel.org/r/20211209131806.19317-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211209131806.19317-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
damon_rand() is called in three files:damon/core.c, damon/ paddr.c,
damon/vaddr.c, i think there is no need to redefine this twice, So move
it to damon.h will be a good choice.
Link: https://lkml.kernel.org/r/20211202075859.51341-1-xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In dbgfs "schemes" interface, i do some test like this:
# cd /sys/kernel/debug/damon
# echo "2 1 2 1 10 1 3 10 1 1 1 1 1 1 1 1 2 3" > schemes
# cat schemes
# 2 1 2 1 10 1 3 10 1 1 1 1 1 1 1 1 2 3 0 0
There have some unreasonable places, i set the valules of these variables
"<min_sz, max_sz> <min_nr_a, max_nr_a>, <min_age, max_age>, <wmarks.high,
wmarks.mid, wmarks.low>" as "<2, 1>, <2, 1>, <10, 1>, <1, 2, 3>.
So there add a validity judgment for these thresholds value.
Link: https://lkml.kernel.org/r/d78360e52158d786fcbf20bc62c96785742e76d3.1637239568.git.xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove 'swap_ranges()' and replace it with the macro 'swap()' defined in
'include/linux/minmax.h' to simplify code and improve efficiency
Link: https://lkml.kernel.org/r/20211111115355.2808-1-hanyihao@vivo.com
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In damon.h some func definitions about VA & PA can only be used in its
own file, so there no need to define in the header file, and the header
file will look cleaner.
If other files later need these functions, the prototypes can be added
to damon.h at that time.
[sj@kernel.org: remove unnecessary function prototype position changes]
Link: https://lkml.kernel.org/r/20211118114827.20052-1-sj@kernel.org
Link: https://lkml.kernel.org/r/45fd5b3ef6cce8e28dbc1c92f9dc845ccfc949d7.1636989871.git.xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In kernel, we can use abs(a - b) to get the absolute value, So there is no
need to redefine a new one.
Link: https://lkml.kernel.org/r/b24e7b82d9efa90daf150d62dea171e19390ad0b.1636989871.git.xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/damon: Do some small changes", v4.
This patch (of 4):
In damon/paddr.c file, two functions names start with underscore,
static void __damon_pa_prepare_access_check(struct damon_ctx *ctx,
struct damon_region *r)
static void __damon_pa_prepare_access_check(struct damon_ctx *ctx,
struct damon_region *r)
In damon/vaddr.c file, there are also two functions with the same function,
static void damon_va_prepare_access_check(struct damon_ctx *ctx,
struct mm_struct *mm, struct damon_region *r)
static void damon_va_check_access(struct damon_ctx *ctx,
struct mm_struct *mm, struct damon_region *r)
It makes sense to keep consistent, and it is not easy to be confused with
the function that call them.
Link: https://lkml.kernel.org/r/cover.1636989871.git.xhao@linux.alibaba.com
Link: https://lkml.kernel.org/r/529054aed932a42b9c09fc9977ad4574b9e7b0bd.1636989871.git.xhao@linux.alibaba.com
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs interface increases the reference counts of 'struct pid's
for targets from the 'target_ids' file write callback
('dbgfs_target_ids_write()'), but decreases the counts only in DAMON
monitoring termination callback ('dbgfs_before_terminate()').
Therefore, when 'target_ids' file is repeatedly written without DAMON
monitoring start/termination, the reference count is not decreased and
therefore memory for the 'struct pid' cannot be freed. This commit
fixes this issue by decreasing the reference counts when 'target_ids' is
written.
Link: https://lkml.kernel.org/r/20211229124029.23348-1-sj@kernel.org
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
DAMON debugfs interface iterates current monitoring targets in
'dbgfs_target_ids_read()' while holding the corresponding
'kdamond_lock'. However, it also destructs the monitoring targets in
'dbgfs_before_terminate()' without holding the lock. This can result in
a use_after_free bug. This commit avoids the race by protecting the
destruction with the corresponding 'kdamond_lock'.
Link: https://lkml.kernel.org/r/20211221094447.2241-1-sj@kernel.org
Reported-by: Sangwoo Bae <sangwoob@amazon.com>
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A couple of test functions in DAMON virtual address space monitoring
primitives implementation has unnecessary damon_ctx variables. This
commit removes those.
Link: https://lkml.kernel.org/r/20211201150440.1088-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|