summaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2014-07-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: 1) Bluetooth pairing fixes from Johan Hedberg. 2) ieee80211_send_auth() doesn't allocate enough tail room for the SKB, from Max Stepanov. 3) New iwlwifi chip IDs, from Oren Givon. 4) bnx2x driver reads wrong PCI config space MSI register, from Yijing Wang. 5) IPV6 MLD Query validation isn't strong enough, from Hangbin Liu. 6) Fix double SKB free in openvswitch, from Andy Zhou. 7) Fix sk_dst_set() being racey with UDP sockets, leading to strange crashes, from Eric Dumazet. 8) Interpret the NAPI budget correctly in the new systemport driver, from Florian Fainelli. 9) VLAN code frees percpu stats in the wrong place, leading to crashes in the get stats handler. From Eric Dumazet. 10) TCP sockets doing a repair can crash with a divide by zero, because we invoke tcp_push() with an MSS value of zero. Just skip that part of the sendmsg paths in repair mode. From Christoph Paasch. 11) IRQ affinity bug fixes in mlx4 driver from Amir Vadai. 12) Don't ignore path MTU icmp messages with a zero mtu, machines out there still spit them out, and all of our per-protocol handlers for PMTU can cope with it just fine. From Edward Allcutt. 13) Some NETDEV_CHANGE notifier invocations were not passing in the correct kind of cookie as the argument, from Loic Prylli. 14) Fix crashes in long multicast/broadcast reassembly, from Jon Paul Maloy. 15) ip_tunnel_lookup() doesn't interpret wildcard keys correctly, fix from Dmitry Popov. 16) Fix skb->sk assigned without taking a reference to 'sk' in appletalk, from Andrey Utkin. 17) Fix some info leaks in ULP event signalling to userspace in SCTP, from Daniel Borkmann. 18) Fix deadlocks in HSO driver, from Olivier Sobrie. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits) hso: fix deadlock when receiving bursts of data hso: remove unused workqueue net: ppp: don't call sk_chk_filter twice mlx4: mark napi id for gro_skb bonding: fix ad_select module param check net: pppoe: use correct channel MTU when using Multilink PPP neigh: sysctl - simplify address calculation of gc_* variables net: sctp: fix information leaks in ulpevent layer MAINTAINERS: update r8169 maintainer net: bcmgenet: fix RGMII_MODE_EN bit tipc: clear 'next'-pointer of message fragments before reassembly r8152: fix r8152_csum_workaround function be2net: set EQ DB clear-intr bit in be_open() GRE: enable offloads for GRE farsync: fix invalid memory accesses in fst_add_one() and fst_init_card() igb: do a reset on SR-IOV re-init if device is down igb: Workaround for i210 Errata 25: Slow System Clock usbnet: smsc95xx: add reset_resume function with reset operation dp83640: Always decode received status frames r8169: disable L23 ...
2014-07-03lz4: add overrun checks to lz4_uncompress_unknownoutputsize()Greg Kroah-Hartman1-1/+5
Jan points out that I forgot to make the needed fixes to the lz4_uncompress_unknownoutputsize() function to mirror the changes done in lz4_decompress() with regards to potential pointer overflows. The only in-kernel user of this function is the zram code, which only takes data from a valid compressed buffer that it made itself, so it's not a big issue. But due to external kernel modules using this function, it's better to be safe here. Reported-by: Jan Beulich <JBeulich@suse.com> Cc: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-02lib/cpumask: cpumask_set_cpu_local_first to use all cores when numa node is ↵Amir Vadai1-1/+1
not defined When device is non numa aware (numa_node == -1), use all online cpu's. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds1-0/+55
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor fixes this time around. The highlights include: - iscsi-target CHAP authentication fixes to enforce explicit key values (Tejas Vaykole + rahul.rane) - fix a long-standing OOPs in target-core when a alua configfs attribute is accessed after port symlink has been removed. (Sebastian Herbszt) - fix a v3.10.y iscsi-target regression causing the login reject status class/detail to be ignored (Christoph Vu-Brugier) - fix a v3.10.y iscsi-target regression to avoid rejecting an existing ITT during Data-Out when data-direction is wrong (Santosh Kulkarni + Arshad Hussain) - fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas Patocka) - fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: fix iscsit_del_np deadlock on unload iovec: move memcpy_from/toiovecend to lib/iovec.c iscsi-target: Avoid rejecting incorrect ITT for Data-Out tcm_loop: Fix memory leak in tcm_loop_submission_work error path iscsi-target: Explicily clear login response PDU in exception path target: Fix left-over se_lun->lun_sep pointer OOPs iscsi-target; Enforce 1024 byte maximum for CHAP_C key value iscsi-target: Convert chap_server_compute_md5 to use kstrtoul
2014-06-27Merge tag 'compress-3.16-rc3' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull compress bugfix from Greg KH: "Here is another lz4 bugfix for 3.16-rc3 that resolves a reported issue with that compression algorithm" * tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lz4: fix another possible overrun
2014-06-27Merge tag 'stable/for-linus-3.16-rc1-tag' of ↵Linus Torvalds1-10/+18
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb bugfix from Konrad Rzeszutek Wilk: "One bug-fix that had been in tree for quite some time. We had assumed that the physical address zero was invalid and would fail it. But that is not true and on some architectures it is not reserved and valid. This fixes it" * tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't assume PA 0 is invalid
2014-06-27iovec: move memcpy_from/toiovecend to lib/iovec.cMichael S. Tsirkin1-0/+55
ERROR: "memcpy_fromiovecend" [drivers/vhost/vhost_scsi.ko] undefined! commit 9f977ef7b671f6169eca78bf40f230fe84b7c7e5 vhost-scsi: Include prot_bytes into expected data transfer length in target-pending makes drivers/vhost/scsi.c call memcpy_fromiovecend(). This function is not available when CONFIG_NET is not enabled. socket.h already includes uio.h, so no callers need updating. Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-27lz4: fix another possible overrunGreg Kroah-Hartman1-1/+3
There is one other possible overrun in the lz4 code as implemented by Linux at this point in time (which differs from the upstream lz4 codebase, but will get synced at in a future kernel release.) As pointed out by Don, we also need to check the overflow in the data itself. While we are at it, replace the odd error return value with just a "simple" -1 value as the return value is never used for anything other than a basic "did this work or not" check. Reported-by: "Don A. Bailey" <donb@securitymouse.com> Reported-by: Willy Tarreau <w@1wt.eu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-23Merge tag 'compress-3.16-rc3' of ↵Linus Torvalds2-21/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull compress bugfixes from Greg KH: "Here are two bugfixes for some compression functions that resolve some errors when uncompressing some pathalogical data. Both were found by Don A Bailey" * tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lz4: ensure length does not wrap lzo: properly check for overruns
2014-06-23lib/Kconfig.debug: let FRAME_POINTER exclude SCORE, just like exclude most ↵Chen Gang1-2/+2
of other architectures The related warning: scripts/kconfig/conf --allmodconfig Kconfig warning: (FAULT_INJECTION_STACKTRACE_FILTER && LATENCYTOP && KMEMCHECK && LOCKDEP) selects FRAME_POINTER which has unmet direct dependencies (DEBUG_KERNEL && (CRIS || M68K || FRV || UML || AVR32 || SUPERH || BLACKFIN || MN10300 || METAG) || ARCH_WANT_FRAME_POINTERS) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Lennox Wu <lennox.wu@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23lz4: ensure length does not wrapGreg Kroah-Hartman1-0/+2
Given some pathologically compressed data, lz4 could possibly decide to wrap a few internal variables, causing unknown things to happen. Catch this before the wrapping happens and abort the decompression. Reported-by: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-23lzo: properly check for overrunsGreg Kroah-Hartman1-21/+41
The lzo decompressor can, if given some really crazy data, possibly overrun some variable types. Modify the checking logic to properly detect overruns before they happen. Reported-by: "Don A. Bailey" <donb@securitymouse.com> Tested-by: "Don A. Bailey" <donb@securitymouse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-20swiotlb: don't assume PA 0 is invalidJan Beulich1-10/+18
In 2.6.29 io_tlb_orig_addr[] got converted from storing virtual addresses to storing physical ones. While checking virtual addresses against NULL is a legitimate thing to catch invalid entries, checking physical ones against zero isn't: There's no guarantee that PFN 0 is reserved on a particular platform. Since it is unclear whether the check in swiotlb_tbl_unmap_single() is actually needed, retain it but check against a guaranteed invalid physical address. This requires setting up the array in a suitable fashion. And since the original code failed to invalidate array entries when regions get unmapped, this is being fixed at once along with adding a similar check to swiotlb_tbl_sync_single(). Obviously the less intrusive change would be to simply drop the check in swiotlb_tbl_unmap_single(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-38/+2052
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-06-12Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds5-2/+22
Pull drm updates from Dave Airlie: "This is the main drm merge window pull request, changes all over the place, mostly normal levels of churn. Highlights: Core drm: More cleanups, fix race on connector/encoder naming, docs updates, object locking rework in prep for atomic modeset i915: mipi DSI support, valleyview power fixes, cursor size fixes, execlist refactoring, vblank improvements, userptr support, OOM handling improvements radeon: GPUVM tuning and large page size support, gart fixes, deep color HDMI support, HDMI audio cleanups nouveau: - displayport rework should fix lots of issues - initial gk20a support - gk110b support - gk208 fixes exynos: probe order fixes, HDMI changes, IPP consolidation msm: debugfs updates, misc fixes ast: ast2400 support, sync with UMS driver tegra: cleanups, hdmi + hw cursor for Tegra 124. panel: fixes existing panels add some new ones. ipuv3: moved from staging to drivers/gpu" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits) drm/nouveau/disp/dp: fix tmds passthrough on dp connector drm/nouveau/dp: probe dpcd to determine connectedness drm/nv50-: trigger update after all connectors disabled drm/nv50-: prepare for attaching a SOR to multiple heads drm/gf119-/disp: fix debug output on update failure drm/nouveau/disp/dp: make use of postcursor when its available drm/g94-/disp/dp: take max pullup value across all lanes drm/nouveau/bios/dp: parse lane postcursor data drm/nouveau/dp: fix support for dpms drm/nouveau: register a drm_dp_aux channel for each dp connector drm/g94-/disp: add method to power-off dp lanes drm/nouveau/disp/dp: maintain link in response to hpd signal drm/g94-/disp: bash and wait for something after changing lane power regs drm/nouveau/disp/dp: split link config/power into two steps drm/nv50/disp: train PIOR-attached DP from second supervisor drm/nouveau/disp/dp: make use of existing output data for link training drm/gf119/disp: start removing direct vbios parsing from supervisor drm/nv50/disp: start removing direct vbios parsing from supervisor drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal drm/nouveau/disp/dp: create subclass for dp outputs ...
2014-06-11cpumask: Utility function to set n'th cpu - local cpu firstAmir Vadai1-0/+63
This function sets the n'th cpu - local cpu's first. For example: in a 16 cores server with even cpu's local, will get the following values: cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set ... cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set ... cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set Curently this function will be used by multi queue networking devices to calculate the irq affinity mask, such that as many local cpu's as possible will be utilized to handle the mq device irq's. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11net: filter: fix nlattr and nlattr_nest BPF testsAlexei Starovoitov1-13/+21
- 'struct nlattr' must be 2 byte aligned - provide big-endian input data for nlattr/nlattr_nest tests Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-08Merge branch 'next' (accumulated 3.16 merge window patches) into masterLinus Torvalds23-111/+204
Now that 3.15 is released, this merges the 'next' branch into 'master', bringing us to the normal situation where my 'master' branch is the merge window. * accumulated work in next: (6809 commits) ufs: sb mutex merge + mutex_destroy powerpc: update comments for generic idle conversion cris: update comments for generic idle conversion idle: remove cpu_idle() forward declarations nbd: zero from and len fields in NBD_CMD_DISCONNECT. mm: convert some level-less printks to pr_* MAINTAINERS: adi-buildroot-devel is moderated MAINTAINERS: add linux-api for review of API/ABI changes mm/kmemleak-test.c: use pr_fmt for logging fs/dlm/debug_fs.c: replace seq_printf by seq_puts fs/dlm/lockspace.c: convert simple_str to kstr fs/dlm/config.c: convert simple_str to kstr mm: mark remap_file_pages() syscall as deprecated mm: memcontrol: remove unnecessary memcg argument from soft limit functions mm: memcontrol: clean up memcg zoneinfo lookup mm/memblock.c: call kmemleak directly from memblock_(alloc|free) mm/mempool.c: update the kmemleak stack trace for mempool allocations lib/radix-tree.c: update the kmemleak stack trace for radix tree allocations mm: introduce kmemleak_update_trace() mm/kmemleak.c: use %u to print ->checksum ...
2014-06-06lib/radix-tree.c: update the kmemleak stack trace for radix tree allocationsCatalin Marinas1-0/+6
Since radix_tree_preload() stack trace is not always useful for debugging an actual radix tree memory leak, this patch updates the kmemleak allocation stack trace in the radix_tree_node_alloc() function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06idr: reduce the unneeded check in free_layer()Lai Jiangshan1-1/+1
If "idr->hint == p" is true, it also implies "idr->hint" is true(not NULL). Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06idr: don't need to shink the free list when idr_remove()Lai Jiangshan1-16/+0
After idr subsystem is changed to RCU-awared, the free layer will not go to the free list. The free list will not be filled up when idr_remove(). So we don't need to shink it too. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06idr: fix idr_replace()'s returned error codeLai Jiangshan1-2/+2
When the smaller id is not found, idr_replace() returns -ENOENT. But when the id is bigger enough, idr_replace() returns -EINVAL, actually there is no difference between these two kinds of ids. These are all unallocated id, the return values of the idr_replace() for these ids should be the same: -ENOENT. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06idr: fix NULL pointer dereference when ida_remove(unallocated_id)Lai Jiangshan1-1/+1
If the ida has at least one existing id, and when an unallocated ID which meets a certain condition is passed to the ida_remove(), the system will crash because it hits NULL pointer dereference. The condition is that the unallocated ID shares the same lowest idr layer with the existing ID, but the idr slot would be different if the unallocated ID were to be allocated. In this case the matching idr slot for the unallocated_id is NULL, causing @bitmap to be NULL which the function dereferences without checking crashing the kernel. See the test code: static void test3(void) { int id; DEFINE_IDA(test_ida); printk(KERN_INFO "Start test3\n"); if (ida_pre_get(&test_ida, GFP_KERNEL) < 0) return; if (ida_get_new(&test_ida, &id) < 0) return; ida_remove(&test_ida, 4000); /* bug: null deference here */ printk(KERN_INFO "End of test3\n"); } It happens only when the caller tries to free an unallocated ID which is the caller's fault. It is not a bug. But it is better to add the proper check and complain rather than crashing the kernel. [tj@kernel.org: updated patch description] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06idr: fix unexpected ID-removal when idr_remove(unallocated_id)Lai Jiangshan1-0/+8
If unallocated_id = (ANY * idr_max(idp->layers) + existing_id) is passed to idr_remove(). The existing_id will be removed unexpectedly. The following test shows this unexpected id-removal: static void test4(void) { int id; DEFINE_IDR(test_idr); printk(KERN_INFO "Start test4\n"); id = idr_alloc(&test_idr, (void *)1, 42, 43, GFP_KERNEL); BUG_ON(id != 42); idr_remove(&test_idr, 42 + IDR_SIZE); TEST_BUG_ON(idr_find(&test_idr, 42) != (void *)1); idr_destroy(&test_idr); printk(KERN_INFO "End of test4\n"); } ida_remove() shares the similar problem. It happens only when the caller tries to free an unallocated ID which is the caller's fault. It is not a bug. But it is better to add the proper check and complain rather than removing an existing_id silently. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06idr: fix overflow bug during maximum ID calculation at maximum heightLai Jiangshan1-5/+3
idr_replace() open-codes the logic to calculate the maximum valid ID given the height of the idr tree; unfortunately, the open-coded logic doesn't account for the fact that the top layer may have unused slots and over-shifts the limit to zero when the tree is at its maximum height. The following test code shows it fails to replace the value for id=((1<<27)+42): static void test5(void) { int id; DEFINE_IDR(test_idr); #define TEST5_START ((1<<27)+42) /* use the highest layer */ printk(KERN_INFO "Start test5\n"); id = idr_alloc(&test_idr, (void *)1, TEST5_START, 0, GFP_KERNEL); BUG_ON(id != TEST5_START); TEST_BUG_ON(idr_replace(&test_idr, (void *)2, TEST5_START) != (void *)1); idr_destroy(&test_idr); printk(KERN_INFO "End of test5\n"); } Fix the bug by using idr_max() which correctly takes into account the maximum allowed shift. sub_alloc() shares the same problem and may incorrectly fail with -EAGAIN; however, this bug doesn't affect correct operation because idr_get_empty_slot(), which already uses idr_max(), retries with the increased @id in such cases. [tj@kernel.org: Updated patch description.] Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-05Merge branch 'arm64-efi-for-linus' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull ARM64 EFI update from Peter Anvin: "By agreement with the ARM64 EFI maintainers, we have agreed to make -tip the upstream for all EFI patches. That is why this patchset comes from me :) This patchset enables EFI stub support for ARM64, like we already have on x86" * 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: efi: only attempt efi map setup if booting via EFI efi/arm64: ignore dtb= when UEFI SecureBoot is enabled doc: arm64: add description of EFI stub support arm64: efi: add EFI stub doc: arm: add UEFI support documentation arm64: add EFI runtime services efi: Add shared FDT related functions for ARM/ARM64 arm64: Add function to create identity mappings efi: add helper function to get UEFI params from FDT doc: efi-stub.txt updates for ARM lib: add fdt_empty_tree.c
2014-06-05Merge commit '9e9a928eed8796a0a1aaed7e0b676db86ba84594' into drm-nextDave Airlie2-4/+4
Merge drm-fixes into drm-next. Both i915 and radeon need this done for later patches. Conflicts: drivers/gpu/drm/drm_crtc_helper.c drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem.c drivers/gpu/drm/i915/i915_gem_execbuffer.c drivers/gpu/drm/i915/i915_gem_gtt.c
2014-06-04lib/asn1_decoder.c: kernel-doc warning fixFabian Frederick1-1/+1
Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/atomic64_test.c: convert printk(KERN_INFO to pr_infoFabian Frederick1-5/+8
Convert printk to current pr_foo() logging functions. Also add pr_fmt based on KBUILD_MODNAME to avoid repeating prefix. Prefix is now "atomic64_test: " Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Luca Barbieri <luca@luca-barbieri.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/bug.c: convert printk to pr_foo()Fabian Frederick1-11/+10
- Coalesce formats - "WARNING:" prefix unchanged to keep bug format. - printk(KERN_DEFAULT not converted. - define pr_fmt without prefix to avoid any default prefix update (suggested by Joe Perches). Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/textsearch.c: move EXPORT_SYMBOL after functionsFabian Frederick1-5/+4
Fix checkpatch warning: "WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable" Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/nlattr.c: move EXPORT_SYMBOL after functionsFabian Frederick1-9/+8
Fix some checkpatch warnings: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Pablo Neira <pablo@netfilter.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/digsig.c: kernel-doc warning fixesFabian Frederick1-2/+3
Small typo and @return: -> Returns ... Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/crc32.c: remove unnecessary __constantFabian Frederick1-2/+2
Use cpu_to_le32 instead of __constant_cpu_to_le32. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/radix-tree.c: kernel-doc warning fixFabian Frederick1-1/+0
index has been removed from __radix_tree_delete_node in 449dd6984d0e47 ("mm: keep page cache radix tree nodes in check") Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/plist.c: make CONFIG_DEBUG_PI_LIST selectableDan Streetman1-5/+10
Change CONFIG_DEBUG_PI_LIST to be user-selectable, and add a title and description. Remove the dependency on DEBUG_RT_MUTEXES since they were changed to use rbtrees, and there are other users of plists now. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/btree.c: fix leak of whole btree nodesMinfei Huang1-0/+1
I use btree from 3.14-rc2 in my own module. When the btree module is removed, a warning arises: kmem_cache_destroy btree_node: Slab cache still has objects CPU: 13 PID: 9150 Comm: rmmod Tainted: GF O 3.14.0-rc2 #1 Hardware name: Inspur NF5270M3/NF5270M3, BIOS CHEETAH_2.1.3 09/10/2013 Call Trace: dump_stack+0x49/0x5d kmem_cache_destroy+0xcf/0xe0 btree_module_exit+0x10/0x12 [btree] SyS_delete_module+0x198/0x1f0 system_call_fastpath+0x16/0x1b The cause is that it doesn't release the last btree node, when height = 1 and fill = 1. [akpm@linux-foundation.org: remove unneeded test of NULL] Signed-off-by: Minfei Huang <huangminfei@ucloud.cn> Cc: Joern Engel <joern@logfs.org> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/vsprintf.c: fix comparison to boolFabian Frederick1-2/+2
Fixing 2 coccinelle warnings: lib/vsprintf.c:2350:2-9: WARNING: Assignment of bool to 0/1 lib/vsprintf.c:2389:3-10: WARNING: Assignment of bool to 0/1 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/libcrc32c.c: use PTR_ERR_OR_ZEROFabian Frederick1-4/+1
replace IS_ERR/PTR_ERR Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/xz: enable all filters by default in KconfigLasse Collin1-12/+12
This restores the old behavior that existed before 2013-02-22, when changes were made by 64dbfb444c150 ("decompressors: drop dependency on CONFIG_EXPERT") and 5dc49c75a2 ("decompressors: make the default XZ_DEC_* config match the selected architecture"). Disabling the filters only makes sense on embedded systems. Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Acked-by: Kyle McMartin <kyle@infradead.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Phillip Lougher <phillip@lougher.demon.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/plist.c: replace pr_debug with printk in plist_test()Dan Streetman1-2/+2
Replace pr_debug() in lib/plist.c test function plist_test() with printk(KERN_DEBUG ...). Without DEBUG defined, pr_debug() is complied out, but the entire plist_test() function is already inside CONFIG_DEBUG_PI_LIST, so printk should just be used directly. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/xz: add comments for the intentionally missing break statementsLasse Collin1-0/+4
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/string.c: use the name "C-string" in commentsDan Carpenter1-4/+4
For strncpy() and friends the source string may or may not have an actual NUL character at the end. The documentation is confusing in this because it specifically mentions that you are passing a "NUL-terminated" string. Wikipedia says that "C-string" is an alternative name we can use instead. http://en.wikipedia.org/wiki/Null-terminated_string Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/plist: add plist_requeueDan Streetman1-0/+52
Add plist_requeue(), which moves the specified plist_node after all other same-priority plist_nodes in the list. This is essentially an optimized plist_del() followed by plist_add(). This is needed by swap, which (with the next patch in this set) uses a plist of available swap devices. When a swap device (either a swap partition or swap file) are added to the system with swapon(), the device is added to a plist, ordered by the swap device's priority. When swap needs to allocate a page from one of the swap devices, it takes the page from the first swap device on the plist, which is the highest priority swap device. The swap device is left in the plist until all its pages are used, and then removed from the plist when it becomes full. However, as described in man 2 swapon, swap must allocate pages from swap devices with the same priority in round-robin order; to do this, on each swap page allocation, swap uses a page from the first swap device in the plist, and then calls plist_requeue() to move that swap device entry to after any other same-priority swap devices. The next swap page allocation will again use a page from the first swap device in the plist and requeue it, and so on, resulting in round-robin usage of equal-priority swap devices. Also add plist_test_requeue() test function, for use by plist_test() to test plist_requeue() function. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Shaohua Li <shli@fusionio.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Cc: Weijie Yang <weijieut@gmail.com> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: replace __get_cpu_var uses with this_cpu_ptrChristoph Lameter1-3/+3
Replace places where __get_cpu_var() is used for an address calculation with this_cpu_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04x86: enable DMA CMA with swiotlbAkinobu Mita1-1/+1
The DMA Contiguous Memory Allocator support on x86 is disabled when swiotlb config option is enabled. So DMA CMA is always disabled on x86_64 because swiotlb is always enabled. This attempts to support for DMA CMA with enabling swiotlb config option. The contiguous memory allocator on x86 is integrated in the function dma_generic_alloc_coherent() which is .alloc callback in nommu_dma_ops for dma_alloc_coherent(). x86_swiotlb_alloc_coherent() which is .alloc callback in swiotlb_dma_ops tries to allocate with dma_generic_alloc_coherent() firstly and then swiotlb_alloc_coherent() is called as a fallback. The main part of supporting DMA CMA with swiotlb is that changing x86_swiotlb_free_coherent() which is .free callback in swiotlb_dma_ops for dma_free_coherent() so that it can distinguish memory allocated by dma_generic_alloc_coherent() from one allocated by swiotlb_alloc_coherent() and release it with dma_generic_free_coherent() which can handle contiguous memory. This change requires making is_swiotlb_buffer() global function. This also needs to change .free callback in the dma_map_ops for amd_gart and sta2x11, because these dma_ops are also using dma_generic_alloc_coherent(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm,vmacache: add debug dataDavidlohr Bueso1-0/+10
Introduce a CONFIG_DEBUG_VM_VMACACHE option to enable counting the cache hit rate -- exported in /proc/vmstat. Any updates to the caching scheme needs this kind of data, thus it can save some work re-implementing the counting all the time. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Cc: Aswin Chandramouleeswaran <aswin@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/debugobjects.c: convert printk(KERN_DEBUG to pr_debugFabian Frederick1-2/+2
Direct conversion of one KERN_DEBUG message without DEBUG definition (suggested by Josh Triplett) That message will now be disabled by default. (see Documentation/CodingStyle Chapter 13) Signed-off-by: Fabian Frederick <fabf@skynet.be> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/debugobjects.c: add pr_fmt to loggingFabian Frederick1-5/+8
Add ODEBUG: prefix to pr_fmt Signed-off-by: Fabian Frederick <fabf@skynet.be> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04lib/debugobjects.c: convert printk to pr_foo()Fabian Frederick1-7/+5
Convert all printk to pr_foo() except KERN_DEBUG (see Documentation/CodingStyle Chapter 13) Signed-off-by: Fabian Frederick <fabf@skynet.be> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 21:27:17 +0000