| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull TPM updates from Jarkko Sakkinen:
"Other than bug fixes for TPM, this includes a patch for asymmetric
keys to allow to look up and verify with self-signed certificates
(keys without so called AKID - Authority Key Identifier) using a new
"dn:" prefix in the query"
* tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
lib: remove redundant assignment to variable ret
tpm: fix NPE on probe for missing device
tpm: fix potential NULL pointer access in tpm_del_char_device
tpm: Add Upgrade/Reduced mode support for TPM2 modules
char: tpm: cr50: Set TPM_FIRMWARE_POWER_MANAGED based on device property
keys: X.509 public key issuer lookup without AKID
tpm_tis: Fix an error handling path in 'tpm_tis_core_init()'
tpm: tpm_tis_spi_cr50: Add default RNG quality
tpm/st33zp24: drop unneeded over-commenting
tpm: add request_locality before write TPM_INT_ENABLE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Algorithms:
- Drop alignment requirement for data in aesni
- Use synchronous seeding from the /dev/random in DRBG
- Reseed nopr DRBGs every 5 minutes from /dev/random
- Add KDF algorithms currently used by security/DH
- Fix lack of entropy on some AMD CPUs with jitter RNG
Drivers:
- Add support for the D1 variant in sun8i-ce
- Add SEV_INIT_EX support in ccp
- PFVF support for GEN4 host driver in qat
- Compression support for GEN4 devices in qat
- Add cn10k random number generator support"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits)
crypto: af_alg - rewrite NULL pointer check
lib/mpi: Add the return value check of kcalloc()
crypto: qat - fix definition of ring reset results
crypto: hisilicon - cleanup warning in qm_get_qos_value()
crypto: kdf - select SHA-256 required for self-test
crypto: x86/aesni - don't require alignment of data
crypto: ccp - remove unneeded semicolon
crypto: stm32/crc32 - Fix kernel BUG triggered in probe()
crypto: s390/sha512 - Use macros instead of direct IV numbers
crypto: sparc/sha - remove duplicate hash init function
crypto: powerpc/sha - remove duplicate hash init function
crypto: mips/sha - remove duplicate hash init function
crypto: sha256 - remove duplicate generic hash init function
crypto: jitter - add oversampling of noise source
MAINTAINERS: update SEC2 driver maintainers list
crypto: ux500 - Use platform_get_irq() to get the interrupt
crypto: hisilicon/qm - disable qm clock-gating
crypto: omap-aes - Fix broken pm_runtime_and_get() usage
MAINTAINERS: update caam crypto driver maintainers list
crypto: octeontx2 - prevent underflow in get_cores_bmap()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Remove some twists in the console registration code. It does not
change the existing behavior except for one corner case. The proper
default console (with tty binding) will be registered again even when
it has been removed in the meantime. It is actually a bug fix.
Anyway, this modified behavior requires some manual interaction.
- Optimize gdb extension for huge ring buffers.
- Do not use atomic operations for a local bitmap variable.
- Update git links in MAINTAINERS.
* tag 'printk-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
MAINTAIERS/printk: Add link to printk git
MAINTAINERS/vsprintf: Update link to printk git tree
scripts/gdb: lx-dmesg: read records individually
printk/console: Clean up boot console handling in register_console()
printk/console: Remove need_default_console variable
printk/console: Remove unnecessary need_default_console manipulation
printk/console: Rename has_preferred_console to need_default_console
printk/console: Split out code that enables default console
vsprintf: Use non-atomic bitmap API when applicable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core
----
- Defer freeing TCP skbs to the BH handler, whenever possible, or at
least perform the freeing outside of the socket lock section to
decrease cross-CPU allocator work and improve latency.
- Add netdevice refcount tracking to locate sources of netdevice and
net namespace refcount leaks.
- Make Tx watchdog less intrusive - avoid pausing Tx and restarting
all queues from a single CPU removing latency spikes.
- Various small optimizations throughout the stack from Eric Dumazet.
- Make netdev->dev_addr[] constant, force modifications to go via
appropriate helpers to allow us to keep addresses in ordered data
structures.
- Replace unix_table_lock with per-hash locks, improving performance
of bind() calls.
- Extend skb drop tracepoint with a drop reason.
- Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW.
BPF
---
- New helpers:
- bpf_find_vma(), find and inspect VMAs for profiling use cases
- bpf_loop(), runtime-bounded loop helper trading some execution
time for much faster (if at all converging) verification
- bpf_strncmp(), improve performance, avoid compiler flakiness
- bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt()
for tracing programs, all inlined by the verifier
- Support BPF relocations (CO-RE) in the kernel loader.
- Further the support for BTF_TYPE_TAG annotations.
- Allow access to local storage in sleepable helpers.
- Convert verifier argument types to a composable form with different
attributes which can be shared across types (ro, maybe-null).
- Prepare libbpf for upcoming v1.0 release by cleaning up APIs,
creating new, extensible ones where missing and deprecating those
to be removed.
Protocols
---------
- WiFi (mac80211/cfg80211):
- notify user space about long "come back in N" AP responses,
allow it to react to such temporary rejections
- allow non-standard VHT MCS 10/11 rates
- use coarse time in airtime fairness code to save CPU cycles
- Bluetooth:
- rework of HCI command execution serialization to use a common
queue and work struct, and improve handling errors reported in
the middle of a batch of commands
- rework HCI event handling to use skb_pull_data, avoiding packet
parsing pitfalls
- support AOSP Bluetooth Quality Report
- SMC:
- support net namespaces, following the RDMA model
- improve connection establishment latency by pre-clearing buffers
- introduce TCP ULP for automatic redirection to SMC
- Multi-Path TCP:
- support ioctls: SIOCINQ, OUTQ, and OUTQNSD
- support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT,
IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY
- support cmsgs: TCP_INQ
- improvements in the data scheduler (assigning data to subflows)
- support fastclose option (quick shutdown of the full MPTCP
connection, similar to TCP RST in regular TCP)
- MCTP (Management Component Transport) over serial, as defined by
DMTF spec DSP0253 - "MCTP Serial Transport Binding".
Driver API
----------
- Support timestamping on bond interfaces in active/passive mode.
- Introduce generic phylink link mode validation for drivers which
don't have any quirks and where MAC capability bits fully express
what's supported. Allow PCS layer to participate in the validation.
Convert a number of drivers.
- Add support to set/get size of buffers on the Rx rings and size of
the tx copybreak buffer via ethtool.
- Support offloading TC actions as first-class citizens rather than
only as attributes of filters, improve sharing and device resource
utilization.
- WiFi (mac80211/cfg80211):
- support forwarding offload (ndo_fill_forward_path)
- support for background radar detection hardware
- SA Query Procedures offload on the AP side
New hardware / drivers
----------------------
- tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with
real-time requirements for isochronous communication with protocols
like OPC UA Pub/Sub.
- Qualcomm BAM-DMUX WWAN - driver for data channels of modems
integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974
(qcom_bam_dmux).
- Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver
with support for bridging, VLANs and multicast forwarding
(lan966x).
- iwlmei driver for co-operating between Intel's WiFi driver and
Intel's Active Management Technology (AMT) devices.
- mse102x - Vertexcom MSE102x Homeplug GreenPHY chips
- Bluetooth:
- MediaTek MT7921 SDIO devices
- Foxconn MT7922A
- Realtek RTL8852AE
Drivers
-------
- Significantly improve performance in the datapaths of: lan78xx,
ax88179_178a, lantiq_xrx200, bnxt.
- Intel Ethernet NICs:
- igb: support PTP/time PEROUT and EXTTS SDP functions on
82580/i354/i350 adapters
- ixgbevf: new PF -> VF mailbox API which avoids the risk of
mailbox corruption with ESXi
- iavf: support configuration of VLAN features of finer
granularity, stacked tags and filtering
- ice: PTP support for new E822 devices with sub-ns precision
- ice: support firmware activation without reboot
- Mellanox Ethernet NICs (mlx5):
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- support TC forwarding when tunnel encap and decap happen between
two ports of the same NIC
- dynamically size and allow disabling various features to save
resources for running in embedded / SmartNIC scenarios
- Broadcom Ethernet NICs (bnxt):
- use page frag allocator to improve Rx performance
- expose control over IRQ coalescing mode (CQE vs EQE) via ethtool
- Other Ethernet NICs:
- amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support
- Microsoft cloud/virtual NIC (mana):
- add XDP support (PASS, DROP, TX)
- Mellanox Ethernet switches (mlxsw):
- initial support for Spectrum-4 ASICs
- VxLAN with IPv6 underlay
- Marvell Ethernet switches (prestera):
- support flower flow templates
- add basic IP forwarding support
- NXP embedded Ethernet switches (ocelot & felix):
- support Per-Stream Filtering and Policing (PSFP)
- enable cut-through forwarding between ports by default
- support FDMA to improve packet Rx/Tx to CPU
- Other embedded switches:
- hellcreek: improve trapping management (STP and PTP) packets
- qca8k: support link aggregation and port mirroring
- Qualcomm 802.11ax WiFi (ath11k):
- qca6390, wcn6855: enable 802.11 power save mode in station mode
- BSS color change support
- WCN6855 hw2.1 support
- 11d scan offload support
- scan MAC address randomization support
- full monitor mode, only supported on QCN9074
- qca6390/wcn6855: report signal and tx bitrate
- qca6390: rfkill support
- qca6390/wcn6855: regdb.bin support
- Intel WiFi (iwlwifi):
- support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS)
in cooperation with the BIOS
- support for Optimized Connectivity Experience (OCE) scan
- support firmware API version 68
- lots of preparatory work for the upcoming Bz device family
- MediaTek WiFi (mt76):
- Specific Absorption Rate (SAR) support
- mt7921: 160 MHz channel support
- RealTek WiFi (rtw88):
- Specific Absorption Rate (SAR) support
- scan offload
- Other WiFi NICs
- ath10k: support fetching (pre-)calibration data from nvmem
- brcmfmac: configure keep-alive packet on suspend
- wcn36xx: beacon filter support"
* tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits)
tcp: tcp_send_challenge_ack delete useless param `skb`
net/qla3xxx: Remove useless DMA-32 fallback configuration
rocker: Remove useless DMA-32 fallback configuration
hinic: Remove useless DMA-32 fallback configuration
lan743x: Remove useless DMA-32 fallback configuration
net: enetc: Remove useless DMA-32 fallback configuration
cxgb4vf: Remove useless DMA-32 fallback configuration
cxgb4: Remove useless DMA-32 fallback configuration
cxgb3: Remove useless DMA-32 fallback configuration
bnx2x: Remove useless DMA-32 fallback configuration
et131x: Remove useless DMA-32 fallback configuration
be2net: Remove useless DMA-32 fallback configuration
vmxnet3: Remove useless DMA-32 fallback configuration
bna: Simplify DMA setting
net: alteon: Simplify DMA setting
myri10ge: Simplify DMA setting
qlcnic: Simplify DMA setting
net: allwinner: Fix print format
page_pool: remove spinlock in page_pool_refill_alloc_cache()
amt: fix wrong return type of amt_send_membership_update()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This consists of several fixes and enhancements. A few highlights:
- Option --kconfig_add option allows easily tweaking kunitconfigs
- make build subcommand can reconfigure if needed
- doesn't error on tests without test plans
- doesn't crash if no parameters are generated
- defaults --jobs to # of cups
- reports test parameter results as (K)TAP subtests"
* tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Default --jobs to number of CPUs
kunit: tool: fix newly introduced typechecker errors
kunit: tool: make `build` subcommand also reconfigure if needed
kunit: tool: delete kunit_parser.TestResult type
kunit: tool: use dataclass instead of collections.namedtuple
kunit: tool: suggest using decode_stacktrace.sh on kernel crash
kunit: tool: reconfigure when the used kunitconfig changes
kunit: tool: revamp message for invalid kunitconfig
kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs
kunit: tool: move Kconfig read_from_file/parse_from_string to package-level
kunit: tool: print parsed test results fully incrementally
kunit: Report test parameter results as (K)TAP subtests
kunit: Don't crash if no parameters are generated
kunit: tool: Report an error if any test has no subtests
kunit: tool: Do not error on tests without test plans
kunit: add run_checks.py script to validate kunit changes
Documentation: kunit: remove claims that kunit is a mocking framework
kunit: tool: fix --json output for skipped tests
|
|
Variable ret is being assigned a value that is never read. If the
for-loop is entered then ret is immediately re-assigned a new
value. If the for-loop is not executed ret is never read. The
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add the return value check of kcalloc() to avoid potential
NULL ptr dereference.
Fixes: a8ea8bdd9df9 ("lib/mpi: Extend the MPI library")
Signed-off-by: Zizhuang Deng <sunsetdzz@gmail.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In preparation for using blake2s in the RNG, we change the way that it
is wired-in to the build system. Instead of using ifdefs to select the
right symbol, we use weak symbols. And because ARM doesn't need the
generic implementation, we make the generic one default only if an arch
library doesn't need it already, and then have arch libraries that do
need it opt-in. So that the arch libraries can remain tristate rather
than bool, we then split the shash part from the glue code.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Use 'bitmap_zalloc()' to simplify code, improve the semantic and reduce
some open-coded arithmetic in allocator arguments.
Also change the corresponding 'kfree()' into 'bitmap_free()' to keep
consistency.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f9541b085ec68e573004e1be200c11c9c901181a.1640295165.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the results for individial parameters in a parameterised test
are simply output as (K)TAP diagnostic lines.
As kunit_tool now supports nested subtests, report each parameter as its
own subtest.
For example, here's what the output now looks like:
# Subtest: inode_test_xtimestamp_decoding
ok 1 - 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits
ok 2 - 1969-12-31 Upper bound of 32bit < 0 timestamp, no extra bits
ok 3 - 1970-01-01 Lower bound of 32bit >=0 timestamp, no extra bits
ok 4 - 2038-01-19 Upper bound of 32bit >=0 timestamp, no extra bits
ok 5 - 2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on
ok 6 - 2106-02-07 Upper bound of 32bit <0 timestamp, lo extra sec bit on
ok 7 - 2106-02-07 Lower bound of 32bit >=0 timestamp, lo extra sec bit on
ok 8 - 2174-02-25 Upper bound of 32bit >=0 timestamp, lo extra sec bit on
ok 9 - 2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on
ok 10 - 2242-03-16 Upper bound of 32bit <0 timestamp, hi extra sec bit on
ok 11 - 2242-03-16 Lower bound of 32bit >=0 timestamp, hi extra sec bit on
ok 12 - 2310-04-04 Upper bound of 32bit >=0 timestamp, hi extra sec bit on
ok 13 - 2310-04-04 Upper bound of 32bit>=0 timestamp, hi extra sec bit 1. 1 ns
ok 14 - 2378-04-22 Lower bound of 32bit>= timestamp. Extra sec bits 1. Max ns
ok 15 - 2378-04-22 Lower bound of 32bit >=0 timestamp. All extra sec bits on
ok 16 - 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra sec bits on
# inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16
ok 1 - inode_test_xtimestamp_decoding
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
It's possible that a parameterised test could end up with zero
parameters. At the moment, the test function will nevertheless be called
with NULL as the parameter. Instead, don't try to run the test code, and
just mark the test as SKIPped.
Reported-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clang and GCC behave a little differently when it comes to the
__no_sanitize_thread attribute, which has valid reasons, and depending
on context either one could be right.
Traditionally, user space ThreadSanitizer [1] still expects instrumented
builtin atomics (to avoid false positives) and __tsan_func_{entry,exit}
(to generate meaningful stack traces), even if the function has the
attribute no_sanitize("thread").
[1] https://clang.llvm.org/docs/ThreadSanitizer.html#attribute-no-sanitize-thread
GCC doesn't follow the same policy (for better or worse), and removes
all kinds of instrumentation if no_sanitize is added. Arguably, since
this may be a problem for user space ThreadSanitizer, we expect this may
change in future.
Since KCSAN != ThreadSanitizer, the likelihood of false positives even
without barrier instrumentation everywhere, is much lower by design.
At least for Clang, however, to fully remove all sanitizer
instrumentation, we must add the disable_sanitizer_instrumentation
attribute, which is available since Clang 14.0.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Add support for modeling a subset of weak memory, which will enable
detection of a subset of data races due to missing memory barriers.
KCSAN's approach to detecting missing memory barriers is based on
modeling access reordering, and enabled if `CONFIG_KCSAN_WEAK_MEMORY=y`,
which depends on `CONFIG_KCSAN_STRICT=y`. The feature can be enabled or
disabled at boot and runtime via the `kcsan.weak_memory` boot parameter.
Each memory access for which a watchpoint is set up, is also selected
for simulated reordering within the scope of its function (at most 1
in-flight access).
We are limited to modeling the effects of "buffering" (delaying the
access), since the runtime cannot "prefetch" accesses (therefore no
acquire modeling). Once an access has been selected for reordering, it
is checked along every other access until the end of the function scope.
If an appropriate memory barrier is encountered, the access will no
longer be considered for reordering.
When the result of a memory operation should be ordered by a barrier,
KCSAN can then detect data races where the conflict only occurs as a
result of a missing barrier due to reordering accesses.
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
bpf 2021-12-08
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 29 files changed, 659 insertions(+), 80 deletions(-).
The main changes are:
1) Fix an off-by-two error in packet range markings and also add a batch of
new tests for coverage of these corner cases, from Maxim Mikityanskiy.
2) Fix a compilation issue on MIPS JIT for R10000 CPUs, from Johan Almbladh.
3) Fix two functional regressions and a build warning related to BTF kfunc
for modules, from Kumar Kartikeya Dwivedi.
4) Fix outdated code and docs regarding BPF's migrate_disable() use on non-
PREEMPT_RT kernels, from Sebastian Andrzej Siewior.
5) Add missing includes in order to be able to detangle cgroup vs bpf header
dependencies, from Jakub Kicinski.
6) Fix regression in BPF sockmap tests caused by missing detachment of progs
from sockets when they are removed from the map, from John Fastabend.
7) Fix a missing "no previous prototype" warning in x86 JIT caused by BPF
dispatcher, from Björn Töpel.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add selftests to cover packet access corner cases
bpf: Fix the off-by-two error in range markings
treewide: Add missing includes masked by cgroup -> bpf dependency
tools/resolve_btfids: Skip unresolved symbol warning for empty BTF sets
bpf: Fix bpf_check_mod_kfunc_call for built-in modules
bpf: Make CONFIG_DEBUG_INFO_BTF depend upon CONFIG_BPF_SYSCALL
mips, bpf: Fix reference to non-existing Kconfig symbol
bpf: Make sure bpf_disable_instrumentation() is safe vs preemption.
Documentation/locking/locktypes: Update migrate_disable() bits.
bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap
bpf, sockmap: Attach map progs to psock early for feature probes
bpf, x86: Fix "no previous prototype" warning
====================
Link: https://lore.kernel.org/r/20211208155125.11826-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net device are refcounted. Over the years we had numerous bugs
caused by imbalanced dev_hold() and dev_put() calls.
The general idea is to be able to precisely pair each decrement with
a corresponding prior increment. Both share a cookie, basically
a pointer to private data storing stack traces.
This patch adds dev_hold_track() and dev_put_track().
To use these helpers, each data structure owning a refcount
should also use a "netdevice_tracker" to pair the hold and put.
netdevice_tracker dev_tracker;
...
dev_hold_track(dev, &dev_tracker, GFP_ATOMIC);
...
dev_put_track(dev, &dev_tracker);
Whenever a leak happens, we will get precise stack traces
of the point dev_hold_track() happened, at device dismantle phase.
We will also get a stack trace if too many dev_put_track() for the same
netdevice_tracker are attempted.
This is guarded by CONFIG_NET_DEV_REFCNT_TRACKER option.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This module uses reference tracker, forcing two issues.
1) Double free of a tracker
2) leak of two trackers, one being allocated from softirq context.
"modprobe test_ref_tracker" would emit the following traces.
(Use scripts/decode_stacktrace.sh if necessary)
[ 171.648681] reference already released.
[ 171.653213] allocated in:
[ 171.656523] alloctest_ref_tracker_alloc2+0x1c/0x20 [test_ref_tracker]
[ 171.656526] init_module+0x86/0x1000 [test_ref_tracker]
[ 171.656528] do_one_initcall+0x9c/0x220
[ 171.656532] do_init_module+0x60/0x240
[ 171.656536] load_module+0x32b5/0x3610
[ 171.656538] __do_sys_init_module+0x148/0x1a0
[ 171.656540] __x64_sys_init_module+0x1d/0x20
[ 171.656542] do_syscall_64+0x4a/0xb0
[ 171.656546] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.656549] freed in:
[ 171.659520] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659522] init_module+0xec/0x1000 [test_ref_tracker]
[ 171.659523] do_one_initcall+0x9c/0x220
[ 171.659525] do_init_module+0x60/0x240
[ 171.659527] load_module+0x32b5/0x3610
[ 171.659529] __do_sys_init_module+0x148/0x1a0
[ 171.659532] __x64_sys_init_module+0x1d/0x20
[ 171.659534] do_syscall_64+0x4a/0xb0
[ 171.659536] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659575] ------------[ cut here ]------------
[ 171.659576] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:112 ref_tracker_free+0x224/0x270
[ 171.659581] Modules linked in: test_ref_tracker(+)
[ 171.659591] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S 5.16.0-smp-DEV #290
[ 171.659595] RIP: 0010:ref_tracker_free+0x224/0x270
[ 171.659599] Code: 5e 41 5f 5d c3 48 c7 c7 04 9c 74 a6 31 c0 e8 62 ee 67 00 83 7b 14 00 75 1a 83 7b 18 00 75 30 4c 89 ff 4c 89 f6 e8 9c 00 69 00 <0f> 0b bb ea ff ff ff eb ae 48 c7 c7 3a 0a 77 a6 31 c0 e8 34 ee 67
[ 171.659601] RSP: 0018:ffff89058ba0bbd0 EFLAGS: 00010286
[ 171.659603] RAX: 0000000000000029 RBX: ffff890586b19780 RCX: 08895bff57c7d100
[ 171.659604] RDX: c0000000ffff7fff RSI: 0000000000000282 RDI: ffffffffc0407000
[ 171.659606] RBP: ffff89058ba0bc88 R08: 0000000000000000 R09: ffffffffa6f342e0
[ 171.659607] R10: 00000000ffff7fff R11: 0000000000000000 R12: 000000008f000000
[ 171.659608] R13: 0000000000000014 R14: 0000000000000282 R15: ffffffffc0407000
[ 171.659609] FS: 00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000
[ 171.659611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 171.659613] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0
[ 171.659614] Call Trace:
[ 171.659615] <TASK>
[ 171.659631] ? alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659633] ? init_module+0x105/0x1000 [test_ref_tracker]
[ 171.659636] ? do_one_initcall+0x9c/0x220
[ 171.659638] ? do_init_module+0x60/0x240
[ 171.659641] ? load_module+0x32b5/0x3610
[ 171.659644] ? __do_sys_init_module+0x148/0x1a0
[ 171.659646] ? __x64_sys_init_module+0x1d/0x20
[ 171.659649] ? do_syscall_64+0x4a/0xb0
[ 171.659652] ? entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659656] ? 0xffffffffc040a000
[ 171.659658] alloctest_ref_tracker_free+0x13/0x20 [test_ref_tracker]
[ 171.659660] init_module+0x105/0x1000 [test_ref_tracker]
[ 171.659663] do_one_initcall+0x9c/0x220
[ 171.659666] do_init_module+0x60/0x240
[ 171.659669] load_module+0x32b5/0x3610
[ 171.659672] __do_sys_init_module+0x148/0x1a0
[ 171.659676] __x64_sys_init_module+0x1d/0x20
[ 171.659678] do_syscall_64+0x4a/0xb0
[ 171.659694] ? exc_page_fault+0x6e/0x140
[ 171.659696] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.659698] RIP: 0033:0x7f97ea3dbe7a
[ 171.659700] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[ 171.659701] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 171.659703] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a
[ 171.659704] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000
[ 171.659705] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000
[ 171.659706] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048
[ 171.659707] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030
[ 171.659709] </TASK>
[ 171.659710] ---[ end trace f5dbd6afa41e60a9 ]---
[ 171.659712] leaked reference.
[ 171.663393] alloctest_ref_tracker_alloc0+0x1c/0x20 [test_ref_tracker]
[ 171.663395] test_ref_tracker_timer_func+0x9/0x20 [test_ref_tracker]
[ 171.663397] call_timer_fn+0x31/0x140
[ 171.663401] expire_timers+0x46/0x110
[ 171.663403] __run_timers+0x16f/0x1b0
[ 171.663404] run_timer_softirq+0x1d/0x40
[ 171.663406] __do_softirq+0x148/0x2d3
[ 171.663408] leaked reference.
[ 171.667101] alloctest_ref_tracker_alloc1+0x1c/0x20 [test_ref_tracker]
[ 171.667103] init_module+0x81/0x1000 [test_ref_tracker]
[ 171.667104] do_one_initcall+0x9c/0x220
[ 171.667106] do_init_module+0x60/0x240
[ 171.667108] load_module+0x32b5/0x3610
[ 171.667111] __do_sys_init_module+0x148/0x1a0
[ 171.667113] __x64_sys_init_module+0x1d/0x20
[ 171.667115] do_syscall_64+0x4a/0xb0
[ 171.667117] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.667131] ------------[ cut here ]------------
[ 171.667132] WARNING: CPU: 5 PID: 13016 at lib/ref_tracker.c:30 ref_tracker_dir_exit+0x104/0x130
[ 171.667136] Modules linked in: test_ref_tracker(+)
[ 171.667144] CPU: 5 PID: 13016 Comm: modprobe Tainted: G S W 5.16.0-smp-DEV #290
[ 171.667147] RIP: 0010:ref_tracker_dir_exit+0x104/0x130
[ 171.667150] Code: 01 00 00 00 00 ad de 48 89 03 4c 89 63 08 48 89 df e8 20 a0 d5 ff 4c 89 f3 4d 39 ee 75 a8 4c 89 ff 48 8b 75 d0 e8 7c 05 69 00 <0f> 0b eb 0c 4c 89 ff 48 8b 75 d0 e8 6c 05 69 00 41 8b 47 08 83 f8
[ 171.667151] RSP: 0018:ffff89058ba0bc68 EFLAGS: 00010286
[ 171.667154] RAX: 08895bff57c7d100 RBX: ffffffffc0407010 RCX: 000000000000003b
[ 171.667156] RDX: 000000000000003c RSI: 0000000000000282 RDI: ffffffffc0407000
[ 171.667157] RBP: ffff89058ba0bc98 R08: 0000000000000000 R09: ffffffffa6f342e0
[ 171.667159] R10: 00000000ffff7fff R11: 0000000000000000 R12: dead000000000122
[ 171.667160] R13: ffffffffc0407010 R14: ffffffffc0407010 R15: ffffffffc0407000
[ 171.667162] FS: 00007f97ea29d740(0000) GS:ffff8923ff940000(0000) knlGS:0000000000000000
[ 171.667164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 171.667166] CR2: 00007f97ea299000 CR3: 0000000186b4a004 CR4: 00000000001706e0
[ 171.667169] Call Trace:
[ 171.667170] <TASK>
[ 171.667171] ? 0xffffffffc040a000
[ 171.667173] init_module+0x126/0x1000 [test_ref_tracker]
[ 171.667175] do_one_initcall+0x9c/0x220
[ 171.667179] do_init_module+0x60/0x240
[ 171.667182] load_module+0x32b5/0x3610
[ 171.667186] __do_sys_init_module+0x148/0x1a0
[ 171.667189] __x64_sys_init_module+0x1d/0x20
[ 171.667192] do_syscall_64+0x4a/0xb0
[ 171.667194] ? exc_page_fault+0x6e/0x140
[ 171.667196] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 171.667199] RIP: 0033:0x7f97ea3dbe7a
[ 171.667200] Code: 48 8b 0d 61 8d 06 00 f7 d8 64 89 01 48 83 c8 ff c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2e 8d 06 00 f7 d8 64 89 01 48
[ 171.667201] RSP: 002b:00007ffea67ce608 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
[ 171.667203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f97ea3dbe7a
[ 171.667204] RDX: 00000000013a0ba0 RSI: 0000000000002808 RDI: 00007f97ea299000
[ 171.667205] RBP: 00007ffea67ce670 R08: 0000000000000003 R09: 0000000000000000
[ 171.667206] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000013a1048
[ 171.667207] R13: 00000000013a0ba0 R14: 0000000001399930 R15: 00000000013a1030
[ 171.667209] </TASK>
[ 171.667210] ---[ end trace f5dbd6afa41e60aa ]---
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It can be hard to track where references are taken and released.
In networking, we have annoying issues at device or netns dismantles,
and we had various proposals to ease root causing them.
This patch adds new infrastructure pairing refcount increases
and decreases. This will self document code, because programmers
will have to associate increments/decrements.
This is controled by CONFIG_REF_TRACKER which can be selected
by users of this feature.
This adds both cpu and memory costs, and thus should probably be
used with care.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'set' bitmap is local to this function. No concurrent access to it is
possible.
So prefer the non-atomic '__[set|clear]_bit()' function to save a few
cycles.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/1abf81a5e509d372393bd22041eed4ebc07ef9f7.1638023178.git.christophe.jaillet@wanadoo.fr
|
|
Vinicius Costa Gomes reported [0] that build fails when
CONFIG_DEBUG_INFO_BTF is enabled and CONFIG_BPF_SYSCALL is disabled.
This leads to btf.c not being compiled, and then no symbol being present
in vmlinux for the declarations in btf.h. Since BTF is not useful
without enabling BPF subsystem, disallow this combination.
However, theoretically disabling both now could still fail, as the
symbol for kfunc_btf_id_list variables is not available. This isn't a
problem as the compiler usually optimizes the whole register/unregister
call, but at lower optimization levels it can fail the build in linking
stage.
Fix that by adding dummy variables so that modules taking address of
them still work, but the whole thing is a noop.
[0]: https://lore.kernel.org/bpf/20211110205418.332403-1-vinicius.gomes@intel.com
Fixes: 14f267d95fe4 ("bpf: btf: Introduce helpers for dynamic BTF set registration")
Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211122144742.477787-2-memxor@gmail.com
|
|
On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
because the ordinary load/store instructions (ldr, ldrh, ldrb) can
tolerate any misalignment of the memory address. However, load/store
double and load/store multiple instructions (ldrd, ldm) may still only
be used on memory addresses that are 32-bit aligned, and so we have to
use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we
may end up with a severe performance hit due to alignment traps that
require fixups by the kernel. Testing shows that this currently happens
with clang-13 but not gcc-11. In theory, any compiler version can
produce this bug or other problems, as we are dealing with undefined
behavior in C99 even on architectures that support this in hardware,
see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363.
Fortunately, the get_unaligned() accessors do the right thing: when
building for ARMv6 or later, the compiler will emit unaligned accesses
using the ordinary load/store instructions (but avoid the ones that
require 32-bit alignment). When building for older ARM, those accessors
will emit the appropriate sequence of ldrb/mov/orr instructions. And on
architectures that can truly tolerate any kind of misalignment, the
get_unaligned() accessors resolve to the leXX_to_cpup accessors that
operate on aligned addresses.
Since the compiler will in fact emit ldrd or ldm instructions when
building this code for ARM v6 or later, the solution is to use the
unaligned accessors unconditionally on architectures where this is
known to be fast. The _aligned version of the hash function is
however still needed to get the best performance on architectures
that cannot do any unaligned access in hardware.
This new version avoids the undefined behavior and should produce
the fastest hash on all architectures we support.
Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/
Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 2c956a60778c ("siphash: add cryptographically secure PRF")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PA-RISC uses a much bigger frame size for functions than other
architectures. So increase it to 2048 for 32- and 64-bit kernels.
This fixes e.g. a warning in lib/xxhash.c.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As done in commit d73dad4eb5ad ("kasan: test: bypass __alloc_size
checks") for __write_overflow warnings, also silence some more cases
that trip the __read_overflow warnings seen in 5.16-rc1[1]:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:10,
from include/linux/cpumask.h:12,
from include/linux/mm_types_task.h:14,
from include/linux/mm_types.h:5,
from include/linux/page-flags.h:13,
from arch/arm64/include/asm/mte.h:14,
from arch/arm64/include/asm/pgtable.h:12,
from include/linux/pgtable.h:6,
from include/linux/kasan.h:29,
from lib/test_kasan.c:10:
In function 'memcmp',
inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2:
include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
263 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
In function 'memchr',
inlined from 'kasan_memchr' at lib/test_kasan.c:872:2:
include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
277 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/14660585/log/
Link: https://lkml.kernel.org/r/20211116004111.3171781-1-keescook@chromium.org
Fixes: d73dad4eb5ad ("kasan: test: bypass __alloc_size checks")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull zstd fixes from Nick Terrell:
"Fix stack usage on parisc & improve code size bloat
This contains three commits:
1. Fixes a minor unused variable warning reported by Kernel test
robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance
sensitive workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing
-O3 from zstd's compilation flags. -O3 triggered bugs in the
hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
neutral compression, about -1% decompression speed. We also reduce
code bloat (-105KB / 374KB).
After this our code bloat is cut from 374KB to 105KB with gcc-11. If
we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't
suitable for a quick fix. I've opened an upstream issue [3] to track
the code size, and try to avoid future regressions, and improve it in
the long term"
Link: https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/ [0]
Link: https://lkml.org/lkml/2021/11/15/710 [1]
Link: https://lkml.org/lkml/2021/11/14/189 [2]
Link: https://github.com/facebook/zstd/issues/2867 [3]
Link: https://lore.kernel.org/r/20211117014949.1169186-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-1-nickrterrell@gmail.com/
* tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux:
lib: zstd: Don't add -O3 to cflags
lib: zstd: Don't inline functions in zstd_opt.c
lib: zstd: Fix unused variable warning
|
|
After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.
I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.
This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:
ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68
ZSTD_compressBlock_fast: 2216 -> 40
ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64
ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76
ZSTD_fillDoubleHashTable: 3252 -> 0
ZSTD_compressBlock_doubleFast: 5856 -> 36
ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84
ZSTD_copmressBlock_lazy2: 2420 -> 72
Additionally, this improves the reported code bloat [1]. With gcc-11
bloat-o-meter shows an 80KB code size improvement:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190)
Total: Before=6418562, After=6336372, chg -1.28%
```
Compared to before the zstd-1.4.10 update we see a total code size
regression of 105KB, down from 374KB at v5.16-rc1:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522)
Total: Before=6228850, After=6336372, chg +1.73%
```
[0] https://lkml.org/lkml/2021/11/15/710
[1] https://lkml.org/lkml/2021/11/14/189
Link: https://lore.kernel.org/r/20211117014949.1169186-4-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-4-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
|
|
`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.
This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.
Bloat-o-meter output on x86-64:
```
> ../scripts/bloat-o-meter vmlinux.old vmlinux
add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266)
Function old new delta
ZSTD_compressBlock_opt_generic.constprop - 7559 +7559
ZSTD_insertBtAndGetAllMatches - 6304 +6304
ZSTD_insertBt1 - 1731 +1731
ZSTD_storeSeq - 693 +693
ZSTD_BtGetAllMatches - 255 +255
ZSTD_updateRep - 128 +128
ZSTD_updateTree 96 99 +3
ZSTD_insertAndFindFirstIndexHash3 81 - -81
ZSTD_setBasePrices.constprop 98 - -98
ZSTD_litLengthPrice.constprop 138 - -138
ZSTD_count 362 181 -181
ZSTD_count_2segments 1407 938 -469
ZSTD_insertBt1.constprop 2689 - -2689
ZSTD_compressBlock_btultra2 19990 423 -19567
ZSTD_compressBlock_btultra 19633 15 -19618
ZSTD_initStats_ultra 19825 - -19825
ZSTD_compressBlock_btopt 20374 12 -20362
ZSTD_compressBlock_btopt_extDict 29984 12 -29972
ZSTD_compressBlock_btultra_extDict 30718 15 -30703
ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677
ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559
Total: Before=6611828, After=6418562, chg -2.92%
```
[0] https://lkml.org/lkml/2021/11/14/189
[1] https://github.com/facebook/zstd/issues/2862
Link: https://lore.kernel.org/r/20211117014949.1169186-3-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-3-nickrterrell@gmail.com/
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
|
|
The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.
This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].
Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.
Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.
[0] https://github.com/facebook/zstd/pull/2838
[1] https://lore.kernel.org/linux-mm/202111120312.833wII4i-lkp@intel.com/T/
[2] https://github.com/facebook/zstd/issues/2868
Link: https://lore.kernel.org/r/20211117014949.1169186-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/r/20211117201459.1194876-2-nickrterrell@gmail.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nick Terrell <terrelln@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
|
|
|
|
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36ec ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b63
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f525e ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb25
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
|
|
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Link: https://lkml.org/lkml/2020/9/29/27 [1]
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12]
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11]
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10]
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9]
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8]
Link: https://lkml.org/lkml/2020/12/3/1195 [v7]
Link: https://lkml.org/lkml/2020/12/2/1245 [v6]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5]
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4]
Link: https://lkml.org/lkml/2020/9/23/1074 [v3]
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1]
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
MAINTAINERS: Add maintainer entry for zstd
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
lib: zstd: Add decompress_sources.h for decompress_unzstd
lib: zstd: Add kernel-specific API
|
|
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect(). If it
wasn't then the a second attempt is made to lock the page. However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity. So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.
Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.
Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
printk from NMI context relies on irq work being raised on the local CPU
to print to console. This can be a problem if the NMI was raised by a
lockup detector to print lockup stack and regs, because the CPU may not
enable irqs (because it is locked up).
Introduce printk_trigger_flush() that can be called another CPU to try
to get those messages to the console, call that where printk_safe_flush
was previously called.
Fixes: 93d102f094be ("printk: remove safe buffers")
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20211107045116.1754411-1-npiggin@gmail.com
|
|
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
|
|
sg_miter_stop() checks for disabled preemption before unmapping a page
via kunmap_atomic(). The kernel doc mentions under context that
preemption must be disabled if SG_MITER_ATOMIC is set.
There is no active requirement for the caller to have preemption
disabled before invoking sg_mitter_stop(). The sg_mitter_*()
implementation itself has no such requirement.
In fact, preemption is disabled by kmap_atomic() as part of
sg_miter_next() and remains disabled as long as there is an active
SG_MITER_ATOMIC mapping. This is a consequence of kmap_atomic() and not
a requirement for sg_mitter_*() itself.
The user chooses SG_MITER_ATOMIC because it uses the API in a context
where blocking is not possible or blocking is possible but he chooses a
lower weight mapping which is not available on all CPUs and so it might
need less overhead to setup at a price that now preemption will be
disabled.
The kmap_atomic() implementation on PREEMPT_RT does not disable
preemption. It simply disables CPU migration to ensure that the task
remains on the same CPU while the caller remains preemptible. This in
turn triggers the warning in sg_miter_stop() because preemption is
allowed.
The PREEMPT_RT and !PREEMPT_RT implementation of kmap_atomic() disable
pagefaults as a requirement. It is sufficient to check for this instead
of disabled preemption.
Check for disabled pagefault handler in the SG_MITER_ATOMIC case.
Remove the "preemption disabled" part from the kernel doc as the
sg_milter*() implementation does not care.
[bigeasy@linutronix.de: commit description]
Link: https://lkml.kernel.org/r/20211015211409.cqopacv3pxdwn2ty@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Codegen become bloated again after simple_strntoull() introduction
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-224 (-224)
Function old new delta
simple_strtoul 5 2 -3
simple_strtol 23 20 -3
simple_strtoull 119 15 -104
simple_strtoll 155 41 -114
Link: https://lkml.kernel.org/r/YVmlB9yY4lvbNKYt@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To print stack entries into a buffer, users of stackdepot, first get a
list of stack entries using stack_depot_fetch and then print this list
into a buffer using stack_trace_snprint. Provide a helper in stackdepot
for this purpose. Also change above mentioned users to use this helper.
[imran.f.khan@oracle.com: fix build error]
Link: https://lkml.kernel.org/r/20210915175321.3472770-4-imran.f.khan@oracle.com
[imran.f.khan@oracle.com: export stack_depot_snprint() to modules]
Link: https://lkml.kernel.org/r/20210916133535.3592491-4-imran.f.khan@oracle.com
Link: https://lkml.kernel.org/r/20210915014806.3206938-4-imran.f.khan@oracle.com
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Jani Nikula <jani.nikula@intel.com> [i915]
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To print a stack entries, users of stackdepot, first use stack_depot_fetch
to get a list of stack entries and then use stack_trace_print to print
this list. Provide a helper in stackdepot to print stack entries based on
stackdepot handle. Also change above mentioned users to use this helper.
Link: https://lkml.kernel.org/r/20210915014806.3206938-3-imran.f.khan@oracle.com
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "lib, stackdepot: check stackdepot handle before accessing slabs", v2.
PATCH-1: Checks validity of a stackdepot handle before proceeding to
access stackdepot slab/objects.
PATCH-2: Adds a helper in stackdepot, to allow users to print stack
entries just by specifying the stackdepot handle. It also changes such
users to use this new interface.
PATCH-3: Adds a helper in stackdepot, to allow users to print stack
entries into buffers just by specifying the stackdepot handle and
destination buffer. It also changes such users to use this new interface.
This patch (of 3):
stack_depot_save allocates slabs that will be used for storing objects in
future.If this slab allocation fails we may get to a situation where space
allocation for a new stack_record fails, causing stack_depot_save to
return 0 as handle. If user of this handle ends up invoking
stack_depot_fetch with this handle value, current implementation of
stack_depot_fetch will end up using slab from wrong index. To avoid this
check handle value at the beginning.
Link: https://lkml.kernel.org/r/20210915175321.3472770-1-imran.f.khan@oracle.com
Link: https://lkml.kernel.org/r/20210915014806.3206938-1-imran.f.khan@oracle.com
Link: https://lkml.kernel.org/r/20210915014806.3206938-2-imran.f.khan@oracle.com
Signed-off-by: Imran Khan <imran.f.khan@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A new warning in clang warns that there is an instance where boolean
expressions are being used with bitwise operators instead of logical
ones:
lib/zstd/decompress/huf_decompress.c:890:25: warning: use of bitwise '&' with boolean operands [-Wbitwise-instead-of-logical]
(BIT_reloadDStreamFast(&bitD1) == BIT_DStream_unfinished)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
zstd does this frequently to help with performance, as logical operators
have branches whereas bitwise ones do not.
To fix this warning in other cases, the expressions were placed on
separate lines with the '&=' operator; however, this particular instance
was moved away from that so that it could be surrounded by LIKELY, which
is a macro for __builtin_expect(), to help with a performance
regression, according to upstream zstd pull #1973.
Aside from switching to logical operators, which is likely undesirable
in this instance, or disabling the warning outright, the solution is
casting one of the expressions to an integer type to make it clear to
clang that the author knows what they are doing. Add a cast to U32 to
silence the warning. The first U32 cast is to silence an instance of
-Wshorten-64-to-32 because __builtin_expect() returns long so it cannot
be moved.
Link: https://github.com/ClangBuiltLinux/linux/issues/1486
Link: https://github.com/facebook/zstd/pull/1973
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Terrell <terrelln@fb.com>
|
|
Upgrade to the latest upstream zstd version 1.4.10.
This patch is 100% generated from upstream zstd commit 20821a46f412 [0].
This patch is very large because it is transitioning from the custom
kernel zstd to using upstream directly. The new zstd follows upstreams
file structure which is different. Future update patches will be much
smaller because they will only contain the changes from one upstream
zstd release.
As an aid for review I've created a commit [1] that shows the diff
between upstream zstd as-is (which doesn't compile), and the zstd
code imported in this patch. The verion of zstd in this patch is
generated from upstream with changes applied by automation to replace
upstreams libc dependencies, remove unnecessary portability macros,
replace `/**` comments with `/*` comments, and use the kernel's xxhash
instead of bundling it.
The benefits of this patch are as follows:
1. Using upstream directly with automated script to generate kernel
code. This allows us to update the kernel every upstream release, so
the kernel gets the latest bug fixes and performance improvements,
and doesn't get 3 years out of date again. The automation and the
translated code are tested every upstream commit to ensure it
continues to work.
2. Upgrades from a custom zstd based on 1.3.1 to 1.4.10, getting 3 years
of performance improvements and bug fixes. On x86_64 I've measured
15% faster BtrFS and SquashFS decompression+read speeds, 35% faster
kernel decompression, and 30% faster ZRAM decompression+read speeds.
3. Zstd-1.4.10 supports negative compression levels, which allow zstd to
match or subsume lzo's performance.
4. Maintains the same kernel-specific wrapper API, so no callers have to
be modified with zstd version updates.
One concern that was brought up was stack usage. Upstream zstd had
already removed most of its heavy stack usage functions, but I just
removed the last functions that allocate arrays on the stack. I've
measured the high water mark for both compression and decompression
before and after this patch. Decompression is approximately neutral,
using about 1.2KB of stack space. Compression levels up to 3 regressed
from 1.4KB -> 1.6KB, and higher compression levels regressed from 1.5KB
-> 2KB. We've added unit tests upstream to prevent further regression.
I believe that this is a reasonable increase, and if it does end up
causing problems, this commit can be cleanly reverted, because it only
touches zstd.
I chose the bulk update instead of replaying upstream commits because
there have been ~3500 upstream commits since the 1.3.1 release, zstd
wasn't ready to be used in the kernel as-is before a month ago, and not
all upstream zstd commits build. The bulk update preserves bisectablity
because bugs can be bisected to the zstd version update. At that point
the update can be reverted, and we can work with upstream to find and
fix the bug.
Note that upstream zstd release 1.4.10 doesn't exist yet. I have cut a
staging branch at 20821a46f412 [0] and will apply any changes requested
to the staging branch. Once we're ready to merge this update I will cut
a zstd release at the commit we merge, so we have a known zstd release
in the kernel.
The implementation of the kernel API is contained in
zstd_compress_module.c and zstd_decompress_module.c.
[0] https://github.com/facebook/zstd/commit/20821a46f4122f9abd7c7b245d28162dde8129c9
[1] https://github.com/terrelln/linux/commit/e0fa481d0e3df26918da0a13749740a1f6777574
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
|
|
Adds decompress_sources.h which includes every .c file necessary for
zstd decompression. This is used in decompress_unzstd.c so the internal
structure of the library isn't exposed.
This allows us to upgrade the zstd library version without modifying any
callers. Instead we just need to update decompress_sources.h.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
|
|
This patch:
- Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h`
- Updates modified zstd headers to yearless copyright
- Adds a new API in `include/linux/zstd.h` that is functionally
equivalent to the in-use subset of the current API. Functions are
renamed to avoid symbol collisions with zstd, to make it clear it is
not the upstream zstd API, and to follow the kernel style guide.
- Updates all callers to use the new API.
There are no functional changes in this patch. Since there are no
functional change, I felt it was okay to update all the callers in a
single patch. Once the API is approved, the callers are mechanically
changed.
This patch is preparing for the 3rd patch in this series, which updates
zstd to version 1.4.10. Since the upstream zstd API is no longer exposed
to callers, the update can happen transparently.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
|
|
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
|
|
We have observed that on very large machines with newer CPUs, the static
key/branch switching delay is on the order of milliseconds. This is due
to the required broadcast IPIs, which simply does not scale well to
hundreds of CPUs (cores). If done too frequently, this can adversely
affect tail latencies of various workloads.
One workaround is to increase the sample interval to several seconds,
while decreasing sampled allocation coverage, but the problem still
exists and could still increase tail latencies.
As already noted in the Kconfig help text, there are trade-offs: at
lower sample intervals the dynamic branch results in better performance;
however, at very large sample intervals, the static keys mode can result
in better performance -- careful benchmarking is recommended.
Our initial benchmarking showed that with large enough sample intervals
and workloads stressing the allocator, the static keys mode was slightly
better. Evaluating and observing the possible system-wide side-effects
of the static-key-switching induced broadcast IPIs, however, was a blind
spot (in particular on large machines with 100s of cores).
Therefore, a major downside of the static keys mode is, unfortunately,
that it is hard to predict performance on new system architectures and
topologies, but also making conclusions about performance of new
workloads based on a limited set of benchmarks.
Most distributions will simply select the defaults, while targeting a
large variety of different workloads and system architectures. As such,
the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is
only recommended after careful evaluation.
For reference, on x86-64 the condition in kfence_alloc() generates
exactly
2 instructions in the kmem_cache_alloc() fast-path:
| ...
| cmpl $0x0,0x1a8021c(%rip) # ffffffff82d560d0 <kfence_allocation_gate>
| je ffffffff812d6003 <kmem_cache_alloc+0x243>
| ...
which, given kfence_allocation_gate is infrequently modified, should be
well predicted by most CPUs.
Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
filter_irq_stacks() has little to do with the stackdepot implementation,
except that it is usually used by users (such as KASAN) of stackdepot to
reduce the stack trace.
However, filter_irq_stacks() itself is not useful without a stack trace
as obtained by stack_trace_save() and friends.
Therefore, move filter_irq_stacks() to kernel/stacktrace.c, so that new
users of filter_irq_stacks() do not have to start depending on
STACKDEPOT only for filter_irq_stacks().
Link: https://lkml.kernel.org/r/20210923104803.2620285-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
CONFIG_MEMORY_HOTPLUG depends on CONFIG_SPARSEMEM, so there is no need for
CONFIG_MEMORY_HOTPLUG_SPARSE anymore; adjust all instances to use
CONFIG_MEMORY_HOTPLUG and remove CONFIG_MEMORY_HOTPLUG_SPARSE.
Link: https://lkml.kernel.org/r/20210929143600.49379-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org> [kselftest]
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
