| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The strlen() may go too far when estimating the length of
the given string. In some cases it may go over the boundary
and crash the system which is the case according to the commit
13a55372b64e ("ARM: orion5x: Revert commit 4904dbda41c8.").
Rectify this by switching to strnlen() for the expected
maximum length of the string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221108141108.62974-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make the description of @policy to @p in nla_policy_len()
to clear the below warnings:
lib/nlattr.c:660: warning: Function parameter or member 'p' not described in 'nla_policy_len'
lib/nlattr.c:660: warning: Excess function parameter 'policy' description in 'nla_policy_len'
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2736
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221107062623.6709-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node"
* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
vsock: fix possible infinite sleep in vsock_connectible_wait_data()
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
ipv6: fix WARNING in ip6_route_net_exit_late()
bridge: Fix flushing of dynamic FDB entries
net, neigh: Fix null-ptr-deref in neigh_table_clear()
net/smc: Fix possible leaked pernet namespace in smc_init()
stmmac: dwmac-loongson: fix invalid mdio_node
ibmvnic: Free rwi on reset success
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
netfilter: ipset: enforce documented limit to prevent allocating huge memory
isdn: mISDN: netjet: fix wrong check of device registration
...
|
|
Jakub reported that the addition of the "network_byte_order"
member in struct nla_policy increases size of 32bit platforms.
Instead of scraping the bit from elsewhere Johannes suggested
to add explicit NLA_BE types instead, so do this here.
NLA_POLICY_MAX_BE() macro is removed again, there is no need
for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing.
NLA_BE64 can be added later.
Fixes: 08724ef69907 ("netlink: introduce NLA_POLICY_MAX_BE")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport"
* tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
mmap: fix remap_file_pages() regression
mm/shmem: ensure proper fallback if page faults
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
x86: fortify: kmsan: fix KMSAN fortify builds
x86: asm: make sure __put_user_size() evaluates pointer once
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
x86/purgatory: disable KMSAN instrumentation
mm: kmsan: export kmsan_copy_page_meta()
mm: migrate: fix return value if all subpages of THPs are migrated successfully
mm/uffd: fix vma check on userfault for wp
mm: prep_compound_tail() clear page->private
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
mm/page_isolation: fix clang deadcode warning
fs/ext4/super.c: remove unused `deprecated_msg'
ipc/msg.c: fix percpu_counter use after free
memory tier, sysfs: rename attribute "nodes" to "nodelist"
MAINTAINERS: git://github.com -> https://github.com for nilfs2
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
...
|
|
Before the do-while loop in mtree_range_walk(), the variables next, min,
max need to be initialized. The variables last, prev_min and prev_max are
set within the loop body before they are eventually used after exiting the
loop body.
As it is a do-while loop, the loop body is executed at least once, so the
variables last, prev_min and prev_max do not need to be initialized before
the loop body.
Remove unneeded initialization of last and prev_min.
The needless initialization was reported by clang-analyzer as Dead Stores.
As the compiler already identifies these assignments as unneeded, it
optimizes the assignments away. Hence:
No functional change. No change in object code.
Link: https://lkml.kernel.org/r/20221026120029.12555-2-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KMSAN adds a lot of instrumentation to the code, which results in
increased stack usage (up to 2048 bytes and more in some cases). It's
hard to predict how big the stack frames can be, so we disable the
warnings for KMSAN instead.
Link: https://lkml.kernel.org/r/20221024212144.2852069-3-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Fix older Clang vs recent overflow KUnit test additions (Nick
Desaulniers, Kees Cook)
- Fix kern-doc visibility for overflow helpers (Kees Cook)
* tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
overflow: Refactor test skips for Clang-specific issues
overflow: disable failing tests for older clang versions
overflow: Fix kern-doc markup for functions
|
|
The "random rhlist add/delete operations" actually wasn't very random, as all
cases tested the same bit. Since the later parts of this loop depend on the
first case execute this unconditionally, and then test on different bits for the
remaining tests. While at it only request as much random bits as are actually
used.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert test exclusion into test skipping. This brings the logic for
why a test is being skipped into the test itself, instead of having to
spread ifdefs around the code. This will make cleanup easier as minimum
tests get raised. Drop __maybe_unused so missed tests will be noticed
again and clean up whitespace.
For example, clang-11 on i386:
[15:52:32] ================== overflow (18 subtests) ==================
[15:52:32] [PASSED] u8_u8__u8_overflow_test
[15:52:32] [PASSED] s8_s8__s8_overflow_test
[15:52:32] [PASSED] u16_u16__u16_overflow_test
[15:52:32] [PASSED] s16_s16__s16_overflow_test
[15:52:32] [PASSED] u32_u32__u32_overflow_test
[15:52:32] [PASSED] s32_s32__s32_overflow_test
[15:52:32] [SKIPPED] u64_u64__u64_overflow_test
[15:52:32] [SKIPPED] s64_s64__s64_overflow_test
[15:52:32] [SKIPPED] u32_u32__int_overflow_test
[15:52:32] [PASSED] u32_u32__u8_overflow_test
[15:52:32] [PASSED] u8_u8__int_overflow_test
[15:52:32] [PASSED] int_int__u8_overflow_test
[15:52:32] [PASSED] shift_sane_test
[15:52:32] [PASSED] shift_overflow_test
[15:52:32] [PASSED] shift_truncate_test
[15:52:32] [PASSED] shift_nonsense_test
[15:52:32] [PASSED] overflow_allocation_test
[15:52:32] [PASSED] overflow_size_helpers_test
[15:52:32] ==================== [PASSED] overflow =====================
[15:52:32] ============================================================
[15:52:32] Testing complete. Ran 18 tests: passed: 15, skipped: 3
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20221006230017.1833458-1-keescook@chromium.org
|
|
Building the overflow kunit tests with clang-11 fails with:
$ ./tools/testing/kunit/kunit.py run --arch=arm --make_options LLVM=1 \
overflow
...
ld.lld: error: undefined symbol: __mulodi4
...
Clang 11 and earlier generate unwanted libcalls for signed output,
unsigned input.
Disable these tests for now, but should these become used in the kernel
we might consider that as justification for dropping clang-11 support.
Keep the clang-11 build alive a little bit longer.
Avoid -Wunused-function warnings via __maybe_unused. To test W=1:
$ make LLVM=1 -j128 defconfig
$ ./scripts/config -e KUNIT -e KUNIT_ALL
$ make LLVM=1 -j128 olddefconfig lib/overflow_kunit.o W=1
Link: https://github.com/ClangBuiltLinux/linux/issues/1711
Link: https://github.com/llvm/llvm-project/commit/3203143f1356a4e4e3ada231156fc6da6e1a9f9d
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221006171751.3444575-1-ndesaulniers@google.com
|
|
The alloc_string_stream() functions were changed from returning NULL on
error to returning error pointers so these caller needs to be updated
as well.
Fixes: 78b1c6584fce ("kunit: string-stream: Simplify resource use")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
|
|
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- fix a race which causes page refcounting errors in ZONE_DEVICE pages
(Alistair Popple)
- fix userfaultfd test harness instability (Peter Xu)
- various other patches in MM, mainly fixes
* tag 'mm-stable-2022-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (29 commits)
highmem: fix kmap_to_page() for kmap_local_page() addresses
mm/page_alloc: fix incorrect PGFREE and PGALLOC for high-order page
mm/selftest: uffd: explain the write missing fault check
mm/hugetlb: use hugetlb_pte_stable in migration race check
mm/hugetlb: fix race condition of uffd missing/minor handling
zram: always expose rw_page
LoongArch: update local TLB if PTE entry exists
mm: use update_mmu_tlb() on the second thread
kasan: fix array-bounds warnings in tests
hmm-tests: add test for migrate_device_range()
nouveau/dmem: evict device private memory during release
nouveau/dmem: refactor nouveau_dmem_fault_copy_one()
mm/migrate_device.c: add migrate_device_range()
mm/migrate_device.c: refactor migrate_vma and migrate_deivce_coherent_page()
mm/memremap.c: take a pgmap reference on page allocation
mm: free device private pages have zero refcount
mm/memory.c: fix race when faulting a device private page
mm/damon: use damon_sz_region() in appropriate place
mm/damon: move sz_damon_region to damon_sz_region
lib/test_meminit: add checks for the allocation functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Fixes:
- When we added basic vDSO support in kernel 5.18 we introduced a bug
which prevented a mmap() of graphic card memory. This is because we
used the DMB (data memory break trap bit) page flag as special-bit,
but missed to clear that bit when loading the TLB.
- Graphics card memory size was not correctly aligned
- Spelling fixes (from Colin Ian King)
Enhancements:
- PDC console (which uses firmware calls) now rewritten as early
console
- Reduced size of alternative tables"
* tag 'parisc-for-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix spelling mistake "mis-match" -> "mismatch" in eisa driver
parisc: Fix userspace graphics card breakage due to pgtable special bit
parisc: fbdev/stifb: Align graphics memory size to 4MB
parisc: Convert PDC console to an early console
parisc: Reduce kernel size by packing alternative tables
|
|
Link: https://lkml.kernel.org/r/a73cf109de0224cfd118d22be58ddebac3ae2897.1664366292.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since 27674ef6c73f ("mm: remove the extra ZONE_DEVICE struct page
refcount") device private pages have no longer had an extra reference
count when the page is in use. However before handing them back to the
owning device driver we add an extra reference count such that free pages
have a reference count of one.
This makes it difficult to tell if a page is free or not because both free
and in use pages will have a non-zero refcount. Instead we should return
pages to the drivers page allocator with a zero reference count. Kernel
code can then safely use kernel functions such as get_page_unless_zero().
Link: https://lkml.kernel.org/r/cf70cf6f8c0bdb8aaebdbfb0d790aea4c683c3c6.1664366292.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Fix several device private page reference counting issues",
v2
This series aims to fix a number of page reference counting issues in
drivers dealing with device private ZONE_DEVICE pages. These result in
use-after-free type bugs, either from accessing a struct page which no
longer exists because it has been removed or accessing fields within the
struct page which are no longer valid because the page has been freed.
During normal usage it is unlikely these will cause any problems. However
without these fixes it is possible to crash the kernel from userspace.
These crashes can be triggered either by unloading the kernel module or
unbinding the device from the driver prior to a userspace task exiting.
In modules such as Nouveau it is also possible to trigger some of these
issues by explicitly closing the device file-descriptor prior to the task
exiting and then accessing device private memory.
This involves some minor changes to both PowerPC and AMD GPU code.
Unfortunately I lack hardware to test either of those so any help there
would be appreciated. The changes mimic what is done in for both Nouveau
and hmm-tests though so I doubt they will cause problems.
This patch (of 8):
When the CPU tries to access a device private page the migrate_to_ram()
callback associated with the pgmap for the page is called. However no
reference is taken on the faulting page. Therefore a concurrent migration
of the device private page can free the page and possibly the underlying
pgmap. This results in a race which can crash the kernel due to the
migrate_to_ram() function pointer becoming invalid. It also means drivers
can't reliably read the zone_device_data field because the page may have
been freed with memunmap_pages().
Close the race by getting a reference on the page while holding the ptl to
ensure it has not been freed. Unfortunately the elevated reference count
will cause the migration required to handle the fault to fail. To avoid
this failure pass the faulting page into the migrate_vma functions so that
if an elevated reference count is found it can be checked to see if it's
expected or not.
[mpe@ellerman.id.au: fix build]
Link: https://lkml.kernel.org/r/87fsgbf3gh.fsf@mpe.ellerman.id.au
Link: https://lkml.kernel.org/r/cover.60659b549d8509ddecafad4f498ee7f03bb23c69.1664366292.git-series.apopple@nvidia.com
Link: https://lkml.kernel.org/r/d3e813178a59e565e8d78d9b9a4e2562f6494f90.1664366292.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
alloc_pages(), kmalloc() and vmalloc() are all memory allocation functions
which can return NULL when some internal memory failures happen. So it is
better to check the return of them to catch the failure in time for better
test them.
Link: https://lkml.kernel.org/r/tencent_D44A49FFB420EDCCBFB9221C8D14DFE12908@qq.com
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more KUnit updates from Shuah Khan:
"Features and fixes:
- simplify resource use
- make kunit_malloc() and kunit_free() allocations and frees
consistent. kunit_free() frees only the memory allocated by
kunit_malloc()
- stop downloading risc-v opensbi binaries using wget
- other fixes and improvements to tool and KUnit framework"
* tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Update description of --alltests option
kunit: declare kunit_assert structs as const
kunit: rename base KUNIT_ASSERTION macro to _KUNIT_FAILED
kunit: remove format func from struct kunit_assert, get it to 0 bytes
kunit: tool: Don't download risc-v opensbi firmware with wget
kunit: make kunit_kfree(NULL) a no-op to match kfree()
kunit: make kunit_kfree() not segfault on invalid inputs
kunit: make kunit_kfree() only work on pointers from kunit_malloc() and friends
kunit: drop test pointer in string_stream_fragment
kunit: string-stream: Simplify resource use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
|
|
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT does not give explicit
-gdwarf-* flag. The actual DWARF version is up to the toolchain.
The combination of GCC and GAS works fine, and Clang with the integrated
assembler is good too.
The combination of Clang and GAS is tricky, but at least, the -g flag
works for Clang <=13, which defaults to DWARF v4.
Clang 14 switched its default to DWARF v5.
Now, CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT has the same issue as
addressed by commit 98cd6f521f10 ("Kconfig: allow explicit opt in to
DWARF v5").
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y for Clang >= 14 and
GAS < 2.35 produces a ton of errors like follows:
/tmp/main-c2741c.s: Assembler messages:
/tmp/main-c2741c.s:109: Error: junk at end of line, first unrecognized character is `"'
/tmp/main-c2741c.s:109: Error: file number less than one
Add 'depends on' to check toolchains.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Commit c0a5c81ca9be ("Kconfig.debug: drop GCC 5+ version check for
DWARF5") could have cleaned up the code a bit more.
"CC_IS_CLANG &&" is unneeded. No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
The prandom_u32() function has been a deprecated inline wrapper around
get_random_u32() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. The same also applies to get_random_int(), which is
just a wrapper around get_random_u32(). This was done as a basic find
and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Acked-by: Helge Deller <deller@gmx.de> # for parisc
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done by hand,
identifying all of the places where one of the random integer functions
was used in a non-32-bit context.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done
mechanically with this coccinelle script:
@@
expression E;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
typedef __be16;
typedef __le16;
typedef u8;
@@
(
- (get_random_u32() & 0xffff)
+ get_random_u16()
|
- (get_random_u32() & 0xff)
+ get_random_u8()
|
- (get_random_u32() % 65536)
+ get_random_u16()
|
- (get_random_u32() % 256)
+ get_random_u8()
|
- (get_random_u32() >> 16)
+ get_random_u16()
|
- (get_random_u32() >> 24)
+ get_random_u8()
|
- (u16)get_random_u32()
+ get_random_u16()
|
- (u8)get_random_u32()
+ get_random_u8()
|
- (__be16)get_random_u32()
+ (__be16)get_random_u16()
|
- (__le16)get_random_u32()
+ (__le16)get_random_u16()
|
- prandom_u32_max(65536)
+ get_random_u16()
|
- prandom_u32_max(256)
+ get_random_u8()
|
- E->inet_id = get_random_u32()
+ E->inet_id = get_random_u16()
)
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
identifier v;
@@
- u16 v = get_random_u32();
+ u16 v = get_random_u16();
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
identifier v;
@@
- u8 v = get_random_u32();
+ u8 v = get_random_u8();
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u16;
u16 v;
@@
- v = get_random_u32();
+ v = get_random_u16();
@@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u8;
u8 v;
@@
- v = get_random_u32();
+ v = get_random_u8();
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Examine limits
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value < 256:
coccinelle.RESULT = cocci.make_ident("get_random_u8")
elif value < 65536:
coccinelle.RESULT = cocci.make_ident("get_random_u16")
else:
print("Skipping large mask of %s" % (literal))
cocci.include_match(False)
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
identifier add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ (RESULT() & LITERAL)
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done by hand, covering things that coccinelle could not do on its own.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext2, ext4, and sbitmap
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rewrite the PDC console to become an early console.
Beside the fact that now boot information is visible until another
(text- or graphics) console takes over, this benefits as well machines
with a yet-unsupported STI console and kgdb.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
swiotlb: don't panic!
swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Feed untrusted RNGs into /dev/random
- Allow HWRNG sleeping to be more interruptible
- Create lib/utils module
- Setting private keys no longer required for akcipher
- Remove tcrypt mode=1000
- Reorganised Kconfig entries
Algorithms:
- Load x86/sha512 based on CPU features
- Add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
Drivers:
- Add HACE crypto driver aspeed"
* tag 'v6.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits)
crypto: aspeed - Remove redundant dev_err call
crypto: scatterwalk - Remove unused inline function scatterwalk_aligned()
crypto: aead - Remove unused inline functions from aead
crypto: bcm - Simplify obtain the name for cipher
crypto: marvell/octeontx - use sysfs_emit() to instead of scnprintf()
hwrng: core - start hwrng kthread also for untrusted sources
crypto: zip - remove the unneeded result variable
crypto: qat - add limit to linked list parsing
crypto: octeontx2 - Remove the unneeded result variable
crypto: ccp - Remove the unneeded result variable
crypto: aspeed - Fix check for platform_get_irq() errors
crypto: virtio - fix memory-leak
crypto: cavium - prevent integer overflow loading firmware
crypto: marvell/octeontx - prevent integer overflows
crypto: aspeed - fix build error when only CRYPTO_DEV_ASPEED is enabled
crypto: hisilicon/qm - fix the qos value initialization
crypto: sun4i-ss - use DEFINE_SHOW_ATTRIBUTE to simplify sun4i_ss_debugfs
crypto: tcrypt - add async speed test for aria cipher
crypto: aria-avx - add AES-NI/AVX/x86_64/GFNI assembler implementation of aria cipher
crypto: aria - prepare generic module for optimized implementations
...
|
|
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove potentially incomplete targets when Kbuid is interrupted by
SIGINT etc in case GNU Make may miss to do that when stderr is piped
to another program.
- Rewrite the single target build so it works more correctly.
- Fix rpm-pkg builds with V=1.
- List top-level subdirectories in ./Kbuild.
- Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
kallsyms.
- Avoid two different modules in lib/zstd/ having shared code, which
potentially causes building the common code as build-in and modular
back-and-forth.
- Unify two modpost invocations to optimize the build process.
- Remove head-y syntax in favor of linker scripts for placing
particular sections in the head of vmlinux.
- Bump the minimal GNU Make version to 3.82.
- Clean up misc Makefiles and scripts.
* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
docs: bump minimal GNU Make version to 3.82
ia64: simplify esi object addition in Makefile
Revert "kbuild: Check if linker supports the -X option"
kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
zstd: Fixing mixed module-builtin objects
kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
kallsyms: take the input file instead of reading stdin
kallsyms: drop duplicated ignore patterns from kallsyms.c
kbuild: reuse mksysmap output for kallsyms
mksysmap: update comment about __crc_*
kbuild: remove head-y syntax
kbuild: use obj-y instead extra-y for objects placed at the head
kbuild: hide error checker logs for V=1 builds
kbuild: re-run modpost when it is updated
kbuild: unify two modpost invocations
kbuild: move vmlinux.o rule to the top Makefile
kbuild: move .vmlinux.objs rule to Makefile.modpost
kbuild: list sub-directories in ./Kbuild
Makefile.compiler: replace cc-ifversion with compiler-specific macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Initialize pointer hashing using the system workqueue. It avoids
taking locks in printk()/vsprintf() code path
- Misc code clean up
* tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Mark __printk percpu data ready __ro_after_init
printk: Remove bogus comment vs. boot consoles
printk: Remove write only variable nr_ext_console_drivers
printk: Declare log_wait properly
printk: Make pr_flush() static
lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready.
lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval().
lib/vnsprintf: add const modifier for param 'bitmap'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull preempt RT updates from Thomas Gleixner:
"Introduce preempt_[dis|enable_nested() and use it to clean up various
places which have open coded PREEMPT_RT conditionals.
On PREEMPT_RT enabled kernels, spinlocks and rwlocks are neither
disabling preemption nor interrupts. Though there are a few places
which depend on the implicit preemption/interrupt disable of those
locks, e.g. seqcount write sections, per CPU statistics updates etc.
PREEMPT_RT added open coded CONFIG_PREEMPT_RT conditionals to
disable/enable preemption in the related code parts all over the
place. That's hard to read and does not really explain why this is
necessary.
Linus suggested to use helper functions (preempt_disable_nested() and
preempt_enable_nested()) and use those in the affected places. On !RT
enabled kernels these functions are NOPs, but contain a lockdep assert
to validate that preemption is actually disabled to catch call sites
which do not have preemption disabled.
Clean up the affected code paths in mm, dentry and lib"
* tag 'sched-rt-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
u64_stats: Streamline the implementation
flex_proportions: Disable preemption entering the write section.
mm/compaction: Get rid of RT ifdeffery
mm/memcontrol: Replace the PREEMPT_RT conditionals
mm/debug: Provide VM_WARN_ON_IRQS_ENABLED()
mm/vmstat: Use preempt_[dis|en]able_nested()
dentry: Use preempt_[dis|en]able_nested()
preempt: Provide preempt_[dis|en]able_nested()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"PMU driver updates:
- Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
support for Zen 4 processors.
- Extend the perf ABI to provide branch speculation information, if
available, and use this on CPUs that have it (eg. LbrExtV2).
- Improve Intel PEBS TSC timestamp handling & integration.
- Add Intel Raptor Lake S CPU support.
- Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
by utilizing IBS tagged load/store samples.
- Clean up & optimize various x86 PMU details.
HW breakpoints:
- Big rework to optimize the code for systems with hundreds of CPUs
and thousands of breakpoints:
- Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
per-CPU rwsem that is read-locked during most of the key
operations.
- Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
fetch_bp_busy_slots().
- Apply micro-optimizations & cleanups.
- Misc cleanups & enhancements"
* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
perf: Fix pmu_filter_match()
perf: Fix lockdep_assert_event_ctx()
perf/x86/amd/lbr: Adjust LBR regardless of filtering
perf/x86/utils: Fix uninitialized var in get_branch_type()
perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
perf/x86/amd: Support PERF_SAMPLE_ADDR
perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
perf/x86/uncore: Add new Raptor Lake S support
perf/x86/cstate: Add new Raptor Lake S support
perf/x86/msr: Add new Raptor Lake S support
perf/x86: Add new Raptor Lake S support
bpf: Check flags for branch stack in bpf_read_branch_records helper
perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
perf: Use sample_flags for raw_data
perf: Use sample_flags for addr
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core and debug printk changes for
6.1-rc1. Included in here is:
- dynamic debug updates for the core and the drm subsystem. The drm
changes have all been acked by the relevant maintainers
- kernfs fixes for syzbot reported problems
- kernfs refactors and updates for cgroup requirements
- magic number cleanups and removals from the kernel tree (they were
not being used and they really did not actually do anything)
- other tiny cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
docs: filesystems: sysfs: Make text and code for ->show() consistent
Documentation: NBD_REQUEST_MAGIC isn't a magic number
a.out: restore CMAGIC
device property: Add const qualifier to device_get_match_data() parameter
drm_print: add _ddebug descriptor to drm_*dbg prototypes
drm_print: prefer bare printk KERN_DEBUG on generic fn
drm_print: optimize drm_debug_enabled for jump-label
drm-print: add drm_dbg_driver to improve namespace symmetry
drm-print.h: include dyndbg header
drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
drm_print: interpose drm_*dbg with forwarding macros
drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
drm_print: condense enum drm_debug_category
debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
Documentation: ENI155_MAGIC isn't a magic number
Documentation: NBD_REPLY_MAGIC isn't a magic number
nbd: remove define-only NBD_MAGIC, previously magic number
Documentation: FW_HEADER_MAGIC isn't a magic number
Documentation: EEPROM_MAGIC_VALUE isn't a magic number
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of TTY and Serial driver updates for 6.1-rc1.
Lots of cleanups in here, no real new functionality this time around,
with the diffstat being that we removed more lines than we added!
Included in here are:
- termios unification cleanups from Al Viro, it's nice to finally get
this work done
- tty serial transmit cleanups in various drivers in preparation for
more cleanup and unification in future releases (that work was not
ready for this release)
- n_gsm fixes and updates
- ktermios cleanups and code reductions
- dt bindings json conversions and updates for new devices
- some serial driver updates for new devices
- lots of other tiny cleanups and janitorial stuff. Full details in
the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
serial: cpm_uart: Don't request IRQ too early for console port
tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
tty: serial: unify TX space reads under altera_jtaguart_tx_space()
tty: serial: use FIELD_GET() in lqasc_tx_ready()
tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
tty: serial: allow pxa.c to be COMPILE_TESTed
serial: stm32: Fix unused-variable warning
tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
serial: 8250: Fix restoring termios speed after suspend
serial: Deassert Transmit Enable on probe in driver-specific way
serial: 8250_dma: Convert to use uart_xmit_advance()
serial: 8250_omap: Convert to use uart_xmit_advance()
MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
serial: stm32: Deassert Transmit Enable on ->rs485_config()
serial: ar933x: Deassert Transmit Enable on ->rs485_config()
tty: serial: atmel: Use FIELD_PREP/FIELD_GET
tty: serial: atmel: Make the driver aware of the existence of GCLK
tty: serial: atmel: Only divide Clock Divisor if the IP is USART
tty: serial: atmel: Separate mode clearing between UART and USART
dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
...
|
|
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- handle number of queue changes in the TCP and RDMA drivers
(Daniel Wagner)
- allow changing the number of queues in nvmet (Daniel Wagner)
- also consider host_iface when checking ip options (Daniel
Wagner)
- don't map pages which can't come from HIGHMEM (Fabio M. De
Francesco)
- avoid unnecessary flush bios in nvmet (Guixin Liu)
- shrink and better pack the nvme_iod structure (Keith Busch)
- add comment for unaligned "fake" nqn (Linjun Bao)
- print actual source IP address through sysfs "address" attr
(Martin Belanger)
- various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang)
- handle effects after freeing the request (Keith Busch)
- copy firmware_rev on each init (Keith Busch)
- restrict management ioctls to admin (Keith Busch)
- ensure subsystem reset is single threaded (Keith Busch)
- report the actual number of tagset maps in nvme-pci (Keith
Busch)
- small fabrics authentication fixups (Christoph Hellwig)
- add common code for tagset allocation and freeing (Christoph
Hellwig)
- stop using the request_queue in nvmet (Christoph Hellwig)
- set min_align_mask before calculating max_hw_sectors (Rishabh
Bhatnagar)
- send a rediscover uevent when a persistent discovery controller
reconnects (Sagi Grimberg)
- misc nvmet-tcp fixes (Varun Prakash, zhenwei pi)
- MD pull request via Song:
- Various raid5 fix and clean up, by Logan Gunthorpe and David
Sloan.
- Raid10 performance optimization, by Yu Kuai.
- sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu)
- IO scheduler switching quisce fix (Keith)
- s390/dasd block driver updates (Stefan)
- support for recovery for the ublk driver (ZiyangZhang)
- rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph)
- blk-mq and null_blk map fixes (Bart)
- various bcache fixes (Coly, Jilin, Jules)
- nbd signal hang fix (Shigeru)
- block writeback throttling fix (Yu)
- optimize the passthrough mapping handling (me)
- prepare block cgroups to being gendisk based (Christoph)
- get rid of an old PSI hack in the block layer, moving it to the
callers instead where it belongs (Christoph)
- blk-throttle fixes and cleanups (Yu)
- misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj,
Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming,
Miaohe, Bart, Coly, Gaosheng
* tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits)
sbitmap: fix lockup while swapping
block: add rationale for not using blk_mq_plug() when applicable
block: adapt blk_mq_plug() to not plug for writes that require a zone lock
s390/dasd: use blk_mq_alloc_disk
blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep
nvmet: don't look at the request_queue in nvmet_bdev_set_limits
nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all
blk-mq: use quiesced elevator switch when reinitializing queues
block: replace blk_queue_nowait with bdev_nowait
nvme: remove nvme_ctrl_init_connect_q
nvme-loop: use the tagset alloc/free helpers
nvme-loop: store the generic nvme_ctrl in set->driver_data
nvme-loop: initialize sqsize later
nvme-fc: use the tagset alloc/free helpers
nvme-fc: store the generic nvme_ctrl in set->driver_data
nvme-fc: keep ctrl->sqsize in sync with opts->queue_size
nvme-rdma: use the tagset alloc/free helpers
nvme-rdma: store the generic nvme_ctrl in set->driver_data
nvme-tcp: use the tagset alloc/free helpers
nvme-tcp: store the generic nvme_ctrl in set->driver_data
...
|
|
Each calll to a KUNIT_EXPECT_*() macro creates a local variable which
contains a struct kunit_assert.
Normally, we'd hope the compiler would be able to optimize this away,
but we've seen cases where it hasn't, see
https://groups.google.com/g/kunit-dev/c/i3fZXgvBrfA/m/GbrMNej2BAAJ.
In changes like commit 21957f90b28f ("kunit: split out part of
kunit_assert into a static const"), we've moved more and more parts out
of struct kunit_assert and its children types (kunit_binary_assert).
This patch removes the final field and gets us to:
sizeof(struct kunit_assert) == 0
sizeof(struct kunit_binary_assert) == 24 (on UML x86_64).
This also reduces the amount of macro plumbing going on at the cost of
passing in one more arg to the base KUNIT_ASSERTION macro and
kunit_do_failed_assertion().
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The real kfree() function will silently return when given a NULL.
So a user might reasonably think they can write the following code:
char *buffer = NULL;
if (param->use_buffer) buffer = kunit_kzalloc(test, 10, GFP_KERNEL);
...
kunit_kfree(test, buffer);
As-is, kunit_kfree() will mark the test as FAILED when buffer is NULL.
(And in earlier times, it would segfault).
Let's match the semantics of kfree().
Suggested-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kunit_kfree() can only work on data ("resources") allocated by KUnit.
Currently for code like this,
> void *ptr = kmalloc(4, GFP_KERNEL);
> kunit_kfree(test, ptr);
kunit_kfree() will segfault.
It'll try and look up the kunit_resource associated with `ptr` and get a
NULL back, but it won't check for this. This means we also segfault if
you double-free.
Change kunit_kfree() so it'll notice these invalid pointers and respond
by failing the test.
Implementation: kunit_destroy_resource() does what kunit_kfree() does,
but is more generic and returns -ENOENT when it can't find the resource.
Sadly, unlike just letting it crash, this means we don't get a stack
trace. But kunit_kfree() is so infrequently used it shouldn't be hard to
track down the bad callsite anyways.
After this change, the above code gives:
> # example_simple_test: EXPECTATION FAILED at lib/kunit/test.c:702
> kunit_kfree: 00000000626ec200 already freed or not allocated by kunit
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kunit_kfree() exists to clean up allocations from kunit_kmalloc() and
friends early instead of waiting for this to happen automatically at the
end of the test.
But it can be used on *anything* registered with the kunit resource API.
E.g. the last 2 statements are equivalent:
struct kunit_resource *res = something();
kfree(res->data);
kunit_put_resource(res);
The problem is that there could be multiple resources that point to the
same `data`.
E.g. you can have a named resource acting as a pseudo-global variable in
a test. If you point it to data allocated with kunit_kmalloc(), then
calling `kunit_kfree(ptr)` has the chance to delete either the named
resource or to kfree `ptr`.
Which one it does depends on the order the resources are registered as
kunit_kfree() will delete resources in LIFO order.
So this patch restricts kunit_kfree() to only working on resources
created by kunit_kmalloc(). Calling it is therefore guaranteed to free
the memory, not do anything else.
Note: kunit_resource_instance_match() wasn't used outside of KUnit, so
it should be safe to remove from the public interface. It's also
generally dangerous, as shown above, and shouldn't be used.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
We already store the `struct kunit *test` in the string_stream object
itself, so we need don't need to store a copy of this pointer in every
fragment in the stream.
Drop it, getting string_stream_fragment down the bare minimum: a
list_head and the `char *` with the actual fragment.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, KUnit's string streams are themselves "KUnit resources".
This is redundant since the stream itself is already allocated with
kunit_kzalloc() and will thus be freed automatically at the end of the
test.
string-stream is only used internally within KUnit, and isn't using the
extra features that resources provide like reference counting, being
able to locate them dynamically as "test-local variables", etc.
Indeed, the resource's refcount is never incremented when the
pointer is returned. The fact that it's always manually destroyed is
more evidence that the reference counting is unused.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
