| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Lots of easy overlapping changes in the confict
resolutions here.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen. This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.
Roman said:
The syzcaller test boils down to opening /dev/kvm, creating an
eventfd, and calling a couple of KVM ioctls. None of this requires
superuser. And the result is dereferencing an uninitialized pointer
which is likely a crash. The specific path caught by syzbot is via
KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
other user-triggerable paths, so cc:stable is probably justified.
Matthew added:
We have around 250 calls to idr_remove() in the kernel today. Many of
them pass an ID which is embedded in the object they're removing, so
they're safe. Picking a few likely candidates:
drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
drivers/atm/nicstar.c could be taken down by a handcrafted packet
Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org
Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com>
Debugged-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull vfs fixes from Al Viro:
"Assorted fixes all over the place"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: fix io_destroy(2) vs. lookup_ioctx() race
ext2: fix a block leak
nfsd: vfs_mkdir() might succeed leaving dentry negative unhashed
cachefiles: vfs_mkdir() might succeed leaving dentry negative unhashed
unfuck sysfs_mount()
kernfs: deal with kernfs_fill_super() failures
cramfs: Fix IS_ENABLED typo
befs_lookup(): use d_splice_alias()
affs_lookup: switch to d_splice_alias()
affs_lookup(): close a race with affs_remove_link()
fix breakage caused by d_find_alias() semantics change
fs: don't scan the inode cache before SB_BORN is set
do d_instantiate/unlock_new_inode combinations safely
iov_iter: fix memory leak in pipe_get_pages_alloc()
iov_iter: fix return type of __pipe_get_pages()
|
|
Fix a race in the multi-order iteration code which causes the kernel to
hit a GP fault. This was first seen with a production v4.15 based
kernel (4.15.6-300.fc27.x86_64) utilizing a DAX workload which used
order 9 PMD DAX entries.
The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree. Remember for example that
an order 2 entry looks like this:
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'
When we delete 'entry' from the tree, we call :
radix_tree_delete()
radix_tree_delete_item()
__radix_tree_delete()
replace_slot()
replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL. This means that for a
brief period of time we end up with one or more of the siblings removed,
so:
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection. This is a common case in
mm/filemap.c.
The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:
V preceding slot
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
^ current slot
This lets you find the first sibling, and you skip them all in order.
But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:
V preceding slot
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
^ current slot
This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers. This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.
In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.
We fix this race by fixing the way that skip_siblings() detects sibling
nodes. Instead of testing against the preceding slot we instead look
for siblings via is_sibling_entry() which compares against the position
of the struct radix_tree_node.slots[] array. This ensures that sibling
entries are properly identified, even if they are no longer contiguous
with the 'entry' they point to.
Link: http://lkml.kernel.org/r/20180503192430.7582-6-ross.zwisler@linux.intel.com
Fixes: 148deab223b2 ("radix-tree: improve multiorder iterators")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: CR, Sapthagirish <sapthagirish.cr@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I had neglected to increment the error counter when the tests failed,
which made the tests noisy when they fail, but not actually return an
error code.
Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au
Fixes: 3cc78125a081 ("lib/test_bitmap.c: add optimisation tests")
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Reviewing Tobin's patches for getting pointers out early before
entropy has been established, I noticed that there's a lone smp_mb() in
the code. As with most lone memory barriers, this one appears to be
incorrectly used.
We currently basically have this:
get_random_bytes(&ptr_key, sizeof(ptr_key));
/*
* have_filled_random_ptr_key==true is dependent on get_random_bytes().
* ptr_to_id() needs to see have_filled_random_ptr_key==true
* after get_random_bytes() returns.
*/
smp_mb();
WRITE_ONCE(have_filled_random_ptr_key, true);
And later we have:
if (unlikely(!have_filled_random_ptr_key))
return string(buf, end, "(ptrval)", spec);
/* Missing memory barrier here. */
hashval = (unsigned long)siphash_1u64((u64)ptr, &ptr_key);
As the CPU can perform speculative loads, we could have a situation
with the following:
CPU0 CPU1
---- ----
load ptr_key = 0
store ptr_key = random
smp_mb()
store have_filled_random_ptr_key
load have_filled_random_ptr_key = true
BAD BAD BAD! (you're so bad!)
Because nothing prevents CPU1 from loading ptr_key before loading
have_filled_random_ptr_key.
But this race is very unlikely, but we can't keep an incorrect smp_mb() in
place. Instead, replace the have_filled_random_ptr_key with a static_branch
not_filled_random_ptr_key, that is initialized to true and changed to false
when we get enough entropy. If the update happens in early boot, the
static_key is updated immediately, otherwise it will have to wait till
entropy is filled and this happens in an interrupt handler which can't
enable a static_key, as that requires a preemptible context. In that case, a
work_queue is used to enable it, as entropy already took too long to
establish in the first place waiting a little more shouldn't hurt anything.
The benefit of using the static key is that the unlikely branch in
vsprintf() now becomes a nop.
Link: http://lkml.kernel.org/r/20180515100558.21df515e@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: ad67b74d2469d ("printk: hash addresses printed with %p")
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Just one little fix from Jean to avoid a harmless but very annoying
warning, especially for the drm code"
* tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: silent unwanted warning "buffer is full"
|
|
If DMA_ATTR_NO_WARN is passed to swiotlb_alloc_buffer(), it should be
passed further down to swiotlb_tbl_map_single(). Otherwise we escape
half of the warnings but still log the other half.
This is one of the multiple causes of spurious warnings reported at:
https://bugs.freedesktop.org/show_bug.cgi?id=104082
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 0176adb00406 ("swiotlb: refactor coherent buffer allocation")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org # v4.16
|
|
test_find_first_bit() is intentionally sub-optimal, and may cause soft
lockup due to long time of run on some systems. So decrease length of
bitmap to traverse to avoid lockup.
With the change below, time of test execution doesn't exceed 0.2 seconds
on my testing system.
Link: http://lkml.kernel.org/r/20180420171949.15710-1-ynorov@caviumnetworks.com
Fixes: 4441fca0a27f5 ("lib: test module for find_*_bit() functions")
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Overlapping changes in selftests Makefile.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove all eBPF tests involving LD_ABS/LD_IND from test_bpf.ko. Reason
is that the eBPF tests from test_bpf module do not go via BPF verifier
and therefore any instruction rewrites from verifier cannot take place.
Therefore, move them into test_verifier which runs out of user space,
so that verfier can rewrite LD_ABS/LD_IND internally in upcoming patches.
It will have the same effect since runtime tests are also performed from
there. This also allows to finally unexport bpf_skb_vlan_{push,pop}_proto
and keep it internal to core kernel.
Additionally, also add further cBPF LD_ABS/LD_IND test coverage into
test_bpf.ko suite.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make n signed to avoid leaking the pages array if __pipe_get_pages()
fails to allocate any pages.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
It returns -EFAULT and happens to be a helper for pipe_get_pages()
whose return type is ssize_t.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The result was printing the warning only when we were explicitly asked
not to.
Cc: stable@vger.kernel.org
Fixes: 0176adb004065d6815a8e67946752df4cd947c5b "swiotlb: refactor
coherent buffer allocation"
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
commit 07e98962fa77 ("kobject: Send hotplug events in all network namespaces")
enabled sending hotplug events into all network namespaces back in 2010.
Over time the set of uevents that get sent into all network namespaces has
shrunk. We have now reached the point where hotplug events for all devices
that carry a namespace tag are filtered according to that namespace.
Specifically, they are filtered whenever the namespace tag of the kobject
does not match the namespace tag of the netlink socket.
Currently, only network devices carry namespace tags (i.e. network
namespace tags). Hence, uevents for network devices only show up in the
network namespace such devices are created in or moved to.
However, any uevent for a kobject that does not have a namespace tag
associated with it will not be filtered and we will broadcast it into all
network namespaces. This behavior stopped making sense when user namespaces
were introduced.
This patch simplifies and fixes couple of things:
- Split codepath for sending uevents by kobject namespace tags:
1. Untagged kobjects - uevent_net_broadcast_untagged():
Untagged kobjects will be broadcast into all uevent sockets recorded
in uevent_sock_list, i.e. into all network namespacs owned by the
intial user namespace.
2. Tagged kobjects - uevent_net_broadcast_tagged():
Tagged kobjects will only be broadcast into the network namespace they
were tagged with.
Handling of tagged kobjects in 2. does not cause any semantic changes.
This is just splitting out the filtering logic that was handled by
kobj_bcast_filter() before.
Handling of untagged kobjects in 1. will cause a semantic change. The
reasons why this is needed and ok have been discussed in [1]. Here is a
short summary:
- Userspace ignores uevents from network namespaces that are not owned by
the intial user namespace:
Uevents are filtered by userspace in a user namespace because the
received uid != 0. Instead the uid associated with the event will be
65534 == "nobody" because the global root uid is not mapped.
This means we can safely and without introducing regressions modify the
kernel to not send uevents into all network namespaces whose owning
user namespace is not the initial user namespace because we know that
userspace will ignore the message because of the uid anyway.
I have a) verified that is is true for every udev implementation out
there b) that this behavior has been present in all udev
implementations from the very beginning.
- Thundering herd:
Broadcasting uevents into all network namespaces introduces significant
overhead.
All processes that listen to uevents running in non-initial user
namespaces will end up responding to uevents that will be meaningless
to them. Mainly, because non-initial user namespaces cannot easily
manage devices unless they have a privileged host-process helping them
out. This means that there will be a thundering herd of activity when
there shouldn't be any.
- Removing needless overhead/Increasing performance:
Currently, the uevent socket for each network namespace is added to the
global variable uevent_sock_list. The list itself needs to be protected
by a mutex. So everytime a uevent is generated the mutex is taken on
the list. The mutex is held *from the creation of the uevent (memory
allocation, string creation etc. until all uevent sockets have been
handled*. This is aggravated by the fact that for each uevent socket
that has listeners the mc_list must be walked as well which means we're
talking O(n^2) here. Given that a standard Linux workload usually has
quite a lot of network namespaces and - in the face of containers - a
lot of user namespaces this quickly becomes a performance problem (see
"Thundering herd" above). By just recording uevent sockets of network
namespaces that are owned by the initial user namespace we
significantly increase performance in this codepath.
- Injecting uevents:
There's a valid argument that containers might be interested in
receiving device events especially if they are delegated to them by a
privileged userspace process. One prime example are SR-IOV enabled
devices that are explicitly designed to be handed of to other users
such as VMs or containers.
This use-case can now be correctly handled since
commit 692ec06d7c92 ("netns: send uevent messages"). This commit
introduced the ability to send uevents from userspace. As such we can
let a sufficiently privileged (CAP_SYS_ADMIN in the owning user
namespace of the network namespace of the netlink socket) userspace
process make a decision what uevents should be sent. This removes the
need to blindly broadcast uevents into all user namespaces and provides
a performant and safe solution to this problem.
- Filtering logic:
This patch filters by *owning user namespace of the network namespace a
given task resides in* and not by user namespace of the task per se.
This means if the user namespace of a given task is unshared but the
network namespace is kept and is owned by the initial user namespace a
listener that is opening the uevent socket in that network namespace
can still listen to uevents.
- Fix permission for tagged kobjects:
Network devices that are created or moved into a network namespace that
is owned by a non-initial user namespace currently are send with
INVALID_{G,U}ID in their credentials. This means that all current udev
implementations in userspace will ignore the uevent they receive for
them. This has lead to weird bugs whereby new devices showing up in such
network namespaces were not recognized and did not get IPs assigned etc.
This patch adjusts the permission to the appropriate {g,u}id in the
respective user namespace. This way udevd is able to correctly handle
such devices.
- Simplify filtering logic:
do_one_broadcast() already ensures that only listeners in mc_list receive
uevents that have the same network namespace as the uevent socket itself.
So the filtering logic in kobj_bcast_filter is not needed (see [3]). This
patch therefore removes kobj_bcast_filter() and replaces
netlink_broadcast_filtered() with the simpler netlink_broadcast()
everywhere.
[1]: https://lkml.org/lkml/2018/4/4/739
[2]: https://lkml.org/lkml/2018/4/26/767
[3]: https://lkml.org/lkml/2018/4/26/738
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds alloc_uevent_skb() in preparation for follow up patches.
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull errseq infrastructure fix from Jeff Layton:
"The PostgreSQL developers recently had a spirited discussion about the
writeback error handling in Linux, and reached out to us about a
behavoir change to the code that bit them when the errseq_t changes
were merged.
When we changed to using errseq_t for tracking writeback errors, we
lost the ability for an application to see a writeback error that
occurred before the open on which the fsync was issued. This was
problematic for PostgreSQL which offloads fsync calls to a completely
separate process from the DB writers.
This patch restores that ability. If the errseq_t value in the inode
does not have the SEEN flag set, then we just return 0 for the sample.
That ensures that any recorded error is always delivered at least
once.
Note that we might still lose the error if the inode gets evicted from
the cache before anything can reopen it, but that was the case before
errseq_t was merged. At LSF/MM we had some discussion about keeping
inodes with unreported writeback errors around in the cache for longer
(possibly indefinitely), but that's really a separate problem"
* tag 'errseq-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
errseq: Always report a writeback error once
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg Kroah-Hartman:
"Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce
the number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: some documentation fixes
selftests:firmware: fixes a call to a wrong function name
kobject: don't use WARN for registration failures
firmware: Fix firmware documentation for recent file renames
test_firmware: fix setting old custom fw path back on exit, second try
test_firmware: Install all scripts
drivers: change struct device_driver::coredump() return type to void
|
|
The errseq_t infrastructure assumes that errors which occurred before
the file descriptor was opened are of no interest to the application.
This turns out to be a regression for some applications, notably Postgres.
Before errseq_t, a writeback error would be reported exactly once (as
long as the inode remained in memory), so Postgres could open a file,
call fsync() and find out whether there had been a writeback error on
that file from another process.
This patch changes the errseq infrastructure to report errors to all
file descriptors which are opened after the error occurred, but before
it was reported to any file descriptor. This restores the user-visible
behaviour.
Cc: stable@vger.kernel.org
Fixes: 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting")
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
|
|
When a walk of an rhashtable is interrupted with rhastable_walk_stop()
and then rhashtable_walk_start(), the location to restart from is based
on a 'skip' count in the current hash chain, and this can be incorrect
if insertions or deletions have happened. This does not happen when
the walk is not stopped and started as iter->p is a placeholder which
is safe to use while holding the RCU read lock.
In rhashtable_walk_start() we can revalidate that 'p' is still in the
same hash chain. If it isn't then the current method is still used.
With this patch, if a rhashtable walker ensures that the current
object remains in the table over a stop/start period (possibly by
elevating the reference count if that is sufficient), it can be sure
that a walk will not miss objects that were in the hashtable for the
whole time of the walk.
rhashtable_walk_start() may not find the object even though it is
still in the hashtable if a rehash has moved it to a new table. In
this case it will (eventually) get -EAGAIN and will need to proceed
through the whole table again to be sure to see everything at least
once.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The documentation claims that when rhashtable_walk_start_check()
detects a resize event, it will rewind back to the beginning
of the table. This is not true. We need to set ->slot and
->skip to be zero for it to be true.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Neither rhashtable_walk_enter() or rhltable_walk_enter() sleep, though
they do take a spinlock without irq protection.
So revise the comments to accurately state the contexts in which
these functions can be called.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an allocation with lower dma_coherent mask fails, dma_direct_alloc()
retries the allocation with GFP_DMA. But, this is useless for
architectures that hav no ZONE_DMA.
Fix it by adding the check of CONFIG_ZONE_DMA before retrying the
allocation.
Fixes: 95f183916d4b ("dma-direct: retry allocations using GFP_DMA for small masks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This WARNING proved to be noisy. The function still returns an error
and callers should handle it. That's how most of kernel code works.
Downgrade the WARNING to pr_err() and leave WARNINGs for kernel bugs.
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+209c0f67f99fec8eb14b@syzkaller.appspotmail.com
Reported-by: syzbot+7fb6d9525a4528104e05@syzkaller.appspotmail.com
Reported-by: syzbot+2e63711063e2d8f9ea27@syzkaller.appspotmail.com
Reported-by: syzbot+de73361ee4971b6e6f75@syzkaller.appspotmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull networking fixes from David Miller:
1) Unbalanced refcounting in TIPC, from Jon Maloy.
2) Only allow TCP_MD5SIG to be set on sockets in close or listen state.
Once the connection is established it makes no sense to change this.
From Eric Dumazet.
3) Missing attribute validation in neigh_dump_table(), also from Eric
Dumazet.
4) Fix address comparisons in SCTP, from Xin Long.
5) Neigh proxy table clearing can deadlock, from Wolfgang Bumiller.
6) Fix tunnel refcounting in l2tp, from Guillaume Nault.
7) Fix double list insert in team driver, from Paolo Abeni.
8) af_vsock.ko module was accidently made unremovable, from Stefan
Hajnoczi.
9) Fix reference to freed llc_sap object in llc stack, from Cong Wang.
10) Don't assume netdevice struct is DMA'able memory in virtio_net
driver, from Michael S. Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
net/smc: fix shutdown in state SMC_LISTEN
bnxt_en: Fix memory fault in bnxt_ethtool_init()
virtio_net: sparse annotation fix
virtio_net: fix adding vids on big-endian
virtio_net: split out ctrl buffer
net: hns: Avoid action name truncation
docs: ip-sysctl.txt: fix name of some ipv6 variables
vmxnet3: fix incorrect dereference when rxvlan is disabled
llc: hold llc_sap before release_sock()
MAINTAINERS: Direct networking documentation changes to netdev
atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"
net: qmi_wwan: add Wistron Neweb D19Q1
net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"
net: stmmac: Disable ACS Feature for GMAC >= 4
net: mvpp2: Fix DMA address mask size
net: change the comment of dev_mc_init
net: qualcomm: rmnet: Fix warning seen with fill_info
tun: fix vlan packet truncation
tipc: fix infinite loop when dumping link monitor summary
tipc: fix use-after-free in tipc_nametbl_stop
...
|
|
Make lib/textsearch.c usable as kernel-doc.
Add textsearch() function family to kernel-api documentation.
Fix kernel-doc warnings in <linux/textsearch.h>:
../include/linux/textsearch.h:65: warning: Incorrect use of kernel-doc format:
* get_next_block - fetch next block of data
../include/linux/textsearch.h:82: warning: Incorrect use of kernel-doc format:
* finish - finalize/clean a series of get_next_block() calls
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes and updates for x86:
- Address a swiotlb regression which was caused by the recent DMA
rework and made driver fail because dma_direct_supported() returned
false
- Fix a signedness bug in the APIC ID validation which caused invalid
APIC IDs to be detected as valid thereby bloating the CPU possible
space.
- Fix inconsisten config dependcy/select magic for the MFD_CS5535
driver.
- Fix a corruption of the physical address space bits when encryption
has reduced the address space and late cpuinfo updates overwrite
the reduced bit information with the original value.
- Dominiks syscall rework which consolidates the architecture
specific syscall functions so all syscalls can be wrapped with the
same macros. This allows to switch x86/64 to struct pt_regs based
syscalls. Extend the clearing of user space controlled registers in
the entry patch to the lower registers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix signedness bug in APIC ID validity checks
x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption
x86/olpc: Fix inconsistent MFD_CS5535 configuration
swiotlb: Use dma_direct_supported() for swiotlb_ops
syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention
syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*()
syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention
syscalls/core, syscalls/x86: Clean up syscall stub naming convention
syscalls/x86: Extend register clearing on syscall entry to lower registers
syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64
syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32
syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
x86/syscalls: Don't pointlessly reload the system call number
x86/mm: Fix documentation of module mapping range with 4-level paging
x86/cpuid: Switch to 'static const' specifier
|
|
The code to verify the new kernels sha digest is applicable for all
architectures. Move it to common code.
One problem is the string.c implementation on x86. Currently sha256
includes x86/boot/string.h which defines memcpy and memset to be gcc
builtins. By moving the sha256 implementation to common code and
changing the include to linux/string.h both functions are no longer
defined. Thus definitions have to be provided in x86/purgatory/string.c
Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com
Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull more gfs2 updates from Bob Peterson:
"We decided to request the latest three patches to be merged into this
merge window while it's still open.
- The first patch adds a new function to lockref:
lockref_put_not_zero
- The second patch fixes GFS2's glock dump code so it uses the new
lockref function. This fixes a problem whereby lock dumps could
miss glocks.
- I made a minor patch to update some comments and fix the lock
ordering text in our gfs2-glocks.txt Documentation file"
* tag 'gfs2-4.17.fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Minor improvements to comments and documentation
gfs2: Stop using rhashtable_walk_peek
lockref: Add lockref_put_not_zero
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Fix for one swiotlb regression in 2.16 from Takashi"
* tag 'dma-mapping-4.17-2' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix unexpected swiotlb_alloc_coherent failures
|
|
Put a lockref unless the lockref is dead or its count would become zero.
This is the same as lockref_put_or_lock except that the lock is never
left held.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Patch series "XArray", v9. (First part thereof).
This patchset is, I believe, appropriate for merging for 4.17. It
contains the XArray implementation, to eventually replace the radix
tree, and converts the page cache to use it.
This conversion keeps the radix tree and XArray data structures in sync
at all times. That allows us to convert the page cache one function at
a time and should allow for easier bisection. Other than renaming some
elements of the structures, the data structures are fundamentally
unchanged; a radix tree walk and an XArray walk will touch the same
number of cachelines. I have changes planned to the XArray data
structure, but those will happen in future patches.
Improvements the XArray has over the radix tree:
- The radix tree provides operations like other trees do; 'insert' and
'delete'. But what most users really want is an automatically
resizing array, and so it makes more sense to give users an API that
is like an array -- 'load' and 'store'. We still have an 'insert'
operation for users that really want that semantic.
- The XArray considers locking as part of its API. This simplifies a
lot of users who formerly had to manage their own locking just for
the radix tree. It also improves code generation as we can now tell
RCU that we're holding a lock and it doesn't need to generate as much
fencing code. The other advantage is that tree nodes can be moved
(not yet implemented).
- GFP flags are now parameters to calls which may need to allocate
memory. The radix tree forced users to decide what the allocation
flags would be at creation time. It's much clearer to specify them at
allocation time.
- Memory is not preloaded; we don't tie up dozens of pages on the off
chance that the slab allocator fails. Instead, we drop the lock,
allocate a new node and retry the operation. We have to convert all
the radix tree, IDA and IDR preload users before we can realise this
benefit, but I have not yet found a user which cannot be converted.
- The XArray provides a cmpxchg operation. The radix tree forces users
to roll their own (and at least four have).
- Iterators take a 'max' parameter. That simplifies many users and will
reduce the amount of iteration done.
- Iteration can proceed backwards. We only have one user for this, but
since it's called as part of the pagefault readahead algorithm, that
seemed worth mentioning.
- RCU-protected pointers are not exposed as part of the API. There are
some fun bugs where the page cache forgets to use rcu_dereference()
in the current codebase.
- Value entries gain an extra bit compared to radix tree exceptional
entries. That gives us the extra bit we need to put huge page swap
entries in the page cache.
- Some iterators now take a 'filter' argument instead of having
separate iterators for tagged/untagged iterations.
The page cache is improved by this:
- Shorter, easier to read code
- More efficient iterations
- Reduction in size of struct address_space
- Fewer walks from the top of the data structure; the XArray API
encourages staying at the leaf node and conducting operations there.
This patch (of 8):
None of these bits may be used for slab allocations, so we can use them
as radix tree flags as long as we mask them off before passing them to
the slab allocator. Move the IDR flag from the high bits to the
GFP_ZONEMASK bits.
Link: http://lkml.kernel.org/r/20180313132639.17387-3-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The entire point of printing the pointers in list_debug is to see if
there's any useful information in them (eg poison values, ASCII, etc);
obscuring them to see if they compare equal makes them much less useful.
If an attacker can force this message to be printed, we've already lost.
Link: http://lkml.kernel.org/r/20180401223237.GV13332@bombadil.infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Tobin C. Harding <me@tobin.cc>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
test_ubsan_misaligned_access() is local to the source and does not need
to be in global scope, so make it static.
Cleans up sparse warning:
lib/test_ubsan.c:91:6: warning: symbol 'test_ubsan_misaligned_access' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20180313103048.28513-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Jinbum Park <jinb.park7@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is a test module for UBSAN. It triggers all undefined behaviors
that linux supports now, and detect them.
All test-cases have passed by compiling with gcc-5.5.0.
If use gcc-4.9.x, misaligned, out-of-bounds, object-size-mismatch will not
be detected. Because gcc-4.9.x doesn't support them.
Link: http://lkml.kernel.org/r/20180309102247.GA2944@pjb1027-Latitude-E5410
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This avoids an accidental stack VLA (since the compiler thinks the value
of "len" can change, even when marked "const"). This just replaces it
with a #define so it will DTRT.
Seen with -Wvla. Fixed as part of the directive to remove all VLAs from
the kernel: https://lkml.org/lkml/2018/3/7/621
Link: http://lkml.kernel.org/r/20180307212555.GA17927@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Keep all of the SOFTLOCKUP kconfig symbols together (instead of
injecting the HARDLOCKUP symbols in the midst of them) so that the
config tools display them with their dependencies.
Tested with 'make {menuconfig/nconfig/gconfig/xconfig}'.
Link: http://lkml.kernel.org/r/6be2d9ed-4656-5b94-460d-7f051e2c7570@infradead.org
Fixes: 05a4a9527931 ("kernel/watchdog: split up config options")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a
specified minimal field width.
It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it
works much faster.
== test_smaps.py
num = 0
with open("/proc/1/smaps") as f:
for x in xrange(10000):
data = f.read()
f.seek(0, 0)
==
== Before patch ==
$ time python test_smaps.py
real 0m4.593s
user 0m0.398s
sys 0m4.158s
== After patch ==
$ time python test_smaps.py
real 0m3.828s
user 0m0.413s
sys 0m3.408s
$ perf -g record python test_smaps.py
== Before patch ==
- 79.01% 3.36% python [kernel.kallsyms] [k] show_smap.isra.33
- 75.65% show_smap.isra.33
+ 48.85% seq_printf
+ 15.75% __walk_page_range
+ 9.70% show_map_vma.isra.23
0.61% seq_puts
== After patch ==
- 75.51% 4.62% python [kernel.kallsyms] [k] show_smap.isra.33
- 70.88% show_smap.isra.33
+ 24.82% seq_put_decimal_ull_w
+ 19.78% __walk_page_range
+ 12.74% seq_printf
+ 11.08% show_map_vma.isra.23
+ 1.68% seq_puts
[akpm@linux-foundation.org: fix drivers/of/unittest.c build]
Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.org
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A compiler can optimize away memset calls by replacing them with mov
instructions. There are KASAN tests that specifically test that KASAN
correctly handles memset calls so we don't want this optimization to
happen.
The solution is to add -fno-builtin flag to test_kasan.ko
Link: http://lkml.kernel.org/r/105ec9a308b2abedb1a0d1fdced0c22d765e4732.1519924383.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When an invalid-free is triggered by one of the KASAN tests, the object
doesn't actually get freed. This later leads to a BUG failure in
kmem_cache_destroy that checks that there are no allocated objects in
the cache that is being destroyed.
Fix this by calling kmem_cache_free with the proper object address after
the call that triggers invalid-free.
Link: http://lkml.kernel.org/r/286eaefc0a6c3fa9b83b87e7d6dc0fbb5b5c9926.1519924383.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The code refactoring by commit 0176adb00406 ("swiotlb: refactor coherent
buffer allocation") made swiotlb_alloc_buffer almost always failing due
to a thinko: namely, the function evaluates the dma_coherent_ok call
incorrectly and dealing as if it's invalid. This ends up with weird
errors like iwlwifi probe failure or amdgpu screen flickering.
This patch corrects the logic error.
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1088658
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1088902
Fixes: 0176adb00406 ("swiotlb: refactor coherent buffer allocation")
Cc: <stable@vger.kernel.org> # v4.16+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New features:
- Tom Zanussi's extended histogram work.
This adds the synthetic events to have histograms from multiple
event data Adds triggers "onmatch" and "onmax" to call the
synthetic events Several updates to the histogram code from this
- Allow way to nest ring buffer calls in the same context
- Allow absolute time stamps in ring buffer
- Rewrite of filter code parsing based on Al Viro's suggestions
- Setting of trace_clock to global if TSC is unstable (on boot)
- Better OOM handling when allocating large ring buffers
- Added initcall tracepoints (consolidated initcall_debug code with
them)
And other various fixes and clean ups"
* tag 'trace-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
init: Have initcall_debug still work without CONFIG_TRACEPOINTS
init, tracing: Have printk come through the trace events for initcall_debug
init, tracing: instrument security and console initcall trace events
init, tracing: Add initcall trace events
tracing: Add rcu dereference annotation for test func that touches filter->prog
tracing: Add rcu dereference annotation for filter->prog
tracing: Fixup logic inversion on setting trace_global_clock defaults
tracing: Hide global trace clock from lockdep
ring-buffer: Add set/clear_current_oom_origin() during allocations
ring-buffer: Check if memory is available before allocation
lockdep: Add print_irqtrace_events() to __warn
vsprintf: Do not preprocess non-dereferenced pointers for bprintf (%px and %pK)
tracing: Uninitialized variable in create_tracing_map_fields()
tracing: Make sure variable string fields are NULL-terminated
tracing: Add action comparisons when testing matching hist triggers
tracing: Don't add flag strings when displaying variable references
tracing: Fix display of hist trigger expressions containing timestamps
ftrace: Drop a VLA in module_exists()
tracing: Mention trace_clock=global when warning about unstable clocks
tracing: Default to using trace_global_clock if sched_clock is unstable
...
|
|
swiotlb_alloc() calls dma_direct_alloc(), which can satisfy lower than 32-bit
DMA mask requests using GFP_DMA if the architecture supports it. Various
x86 drivers rely on that, so we need to support that. At the same time
the whole kernel expects a 32-bit DMA mask to just work, so the other magic
in swiotlb_dma_supported() isn't actually needed either.
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: iommu@lists.linux-foundation.org
Fixes: 6e4bf5867783 ("x86/dma: Use generic swiotlb_ops")
Link: http://lkml.kernel.org/r/20180409091517.6619-2-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Support for 4PB user address space on 64-bit, opt-in via mmap().
- Removal of POWER4 support, which was accidentally broken in 2016
and no one noticed, and blocked use of some modern instructions.
- Workarounds so that the hypervisor can enable Transactional Memory
on Power9.
- A series to disable the DAWR (Data Address Watchpoint Register) on
Power9.
- More information displayed in the meltdown/spectre_v1/v2 sysfs
files.
- A vpermxor (Power8 Altivec) implementation for the raid6 Q
Syndrome.
- A big series to make the allocation of our pacas (per cpu area),
kernel page tables, and per-cpu stacks NUMA aware when using the
Radix MMU on Power9.
And as usual many fixes, reworks and cleanups.
Thanks to: Aaro Koskinen, Alexandre Belloni, Alexey Kardashevskiy,
Alistair Popple, Andy Shevchenko, Aneesh Kumar K.V, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
Lombard, Cyril Bur, Daniel Axtens, Dave Young, Finn Thain, Frederic
Barrat, Gustavo Romero, Horia Geantă, Jonathan Neuschäfer, Kees Cook,
Larry Finger, Laurent Dufour, Laurent Vivier, Logan Gunthorpe,
Madhavan Srinivasan, Mark Greer, Mark Hairgrove, Markus Elfring,
Mathieu Malaterre, Matt Brown, Matt Evans, Mauricio Faria de Oliveira,
Michael Neuling, Naveen N. Rao, Nicholas Piggin, Paul Mackerras,
Philippe Bergheaud, Ram Pai, Rob Herring, Sam Bobroff, Segher
Boessenkool, Simon Guo, Simon Horman, Stewart Smith, Sukadev
Bhattiprolu, Suraj Jitindar Singh, Thiago Jung Bauermann, Vaibhav
Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wei Yongjun"
* tag 'powerpc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (207 commits)
powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep
powerpc/64s: Fix POWER9 DD2.2 and above in cputable features
powerpc/64s: Fix pkey support in dt_cpu_ftrs, add CPU_FTR_PKEY bit
powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear unwanted LPCR bits
Revert "powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead"
powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo}
powerpc: io.h: move iomap.h include so that it can use readq/writeq defs
cxl: Fix possible deadlock when processing page faults from cxllib
powerpc/hw_breakpoint: Only disable hw breakpoint if cpu supports it
powerpc/mm/radix: Update command line parsing for disable_radix
powerpc/mm/radix: Parse disable_radix commandline correctly.
powerpc/mm/hugetlb: initialize the pagetable cache correctly for hugetlb
powerpc/mm/radix: Update pte fragment count from 16 to 256 on radix
powerpc/mm/keys: Update documentation and remove unnecessary check
powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead
powerpc/64s/idle: Consolidate power9_offline_stop()/power9_idle_stop()
powerpc/powernv: Always stop secondaries before reboot/shutdown
powerpc: hard disable irqs in smp_send_stop loop
powerpc: use NMI IPI for smp_send_stop
powerpc/powernv: Fix SMT4 forcing idle code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- move pci_uevent_ers() out of pci.h (Michael Ellerman)
- skip ASPM common clock warning if BIOS already configured it (Sinan
Kaya)
- fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva)
- remove last user of pci_get_bus_and_slot() and the function itself
(Sinan Kaya)
- add decoding for 16 GT/s link speed (Jay Fang)
- add interfaces to get max link speed and width (Tal Gilboa)
- add pcie_bandwidth_capable() to compute max supported link bandwidth
(Tal Gilboa)
- add pcie_bandwidth_available() to compute bandwidth available to
device (Tal Gilboa)
- add pcie_print_link_status() to log link speed and whether it's
limited (Tal Gilboa)
- use PCI core interfaces to report when device performance may be
limited by its slot instead of doing it in each driver (Tal Gilboa)
- fix possible cpqphp NULL pointer dereference (Shawn Lin)
- rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI
hotplug (Mika Westerberg)
- add support for PCI I/O port space that's neither directly accessible
via CPU in/out instructions nor directly mapped into CPU physical
memory space. This is fairly intrusive and includes minor changes to
interfaces used for I/O space on most platforms (Zhichang Yuan, John
Garry)
- add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan,
John Garry)
- use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)
- remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
(Shawn Lin)
- report quirk timings with dev_info (Bjorn Helgaas)
- report quirks that take longer than 10ms (Bjorn Helgaas)
- add and use Altera Vendor ID (Johannes Thumshirn)
- tidy Makefiles and comments (Bjorn Helgaas)
- don't set up INTx if MSI or MSI-X is enabled to align cris, frv,
ia64, and mn10300 with x86 (Bjorn Helgaas)
- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
Lawler)
- merge pcieport_if.h into portdrv.h (Bjorn Helgaas)
- move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
Helgaas)
- completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)
- remove portdrv link order dependency (Bjorn Helgaas)
- remove support for unused VC portdrv service (Bjorn Helgaas)
- simplify portdrv feature permission checking (Bjorn Helgaas)
- remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
Helgaas)
- remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)
- use cached AER capability offset (Frederick Lawler)
- don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)
- rename pcie-dpc.c to dpc.c (Bjorn Helgaas)
- use generic pci_mmap_resource_range() instead of powerpc and xtensa
arch-specific versions (David Woodhouse)
- support arbitrary PCI host bridge offsets on sparc (Yinghai Lu)
- remove System and Video ROM reservations on sparc (Bjorn Helgaas)
- probe for device reset support during enumeration instead of runtime
(Bjorn Helgaas)
- add ACS quirk for Ampere (née APM) root ports (Feng Kan)
- add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
Vincent-Cross)
- protect device restore with device lock (Sinan Kaya)
- handle failure of FLR gracefully (Sinan Kaya)
- handle CRS (config retry status) after device resets (Sinan Kaya)
- skip various config reads for SR-IOV VFs as an optimization
(KarimAllah Ahmed)
- consolidate VPD code in vpd.c (Bjorn Helgaas)
- add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)
- add DT support for R-Car r8a7743 (Biju Das)
- fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host
bridge driver that causes a general protection fault (Dexuan Cui)
- fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV
(Dexuan Cui)
- fix Hyper-V host bridge hang when ejecting a VF before setting up MSI
(Dexuan Cui)
- make several structures static (Fengguang Wu)
- increase number of MSI IRQs supported by Synopsys DesignWare bridges
from 32 to 256 (Gustavo Pimentel)
- implemented multiplexed IRQ domain API and remove obsolete MSI IRQ
API from DesignWare drivers (Gustavo Pimentel)
- add Tegra power management support (Manikanta Maddireddy)
- add Tegra loadable module support (Manikanta Maddireddy)
- handle 64-bit BARs correctly in endpoint support (Niklas Cassel)
- support optional regulator for HiSilicon STB (Shawn Guo)
- use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla)
- support power supplies for Qualcomm msm8996 (Srinivas Kandagatla)
* tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits)
MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
HISI LPC: Add ACPI support
ACPI / scan: Do not enumerate Indirect IO host children
ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
of: Add missing I/O range exception for indirect-IO devices
PCI: Apply the new generic I/O management on PCI IO hosts
PCI: Add fwnode handler as input param of pci_register_io_range()
PCI: Remove __weak tag from pci_register_io_range()
MAINTAINERS: Add missing /drivers/pci/cadence directory entry
fm10k: Report PCIe link properties with pcie_print_link_status()
net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
net/mlx5: Report PCIe link properties with pcie_print_link_status()
net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
PCI: Add pcie_print_link_status() to log link speed and whether it's limited
PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
misc: pci_endpoint_test: Handle 64-bit BARs properly
PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
...
|
|
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- the v9fs maintainers have been missing for a long time. I've taken
over v9fs patch slinging.
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits)
mm,oom_reaper: check for MMF_OOM_SKIP before complaining
mm/ksm: fix interaction with THP
mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t
headers: untangle kmemleak.h from mm.h
include/linux/mmdebug.h: make VM_WARN* non-rvals
mm/page_isolation.c: make start_isolate_page_range() fail if already isolated
mm: change return type to vm_fault_t
mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes
mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory
kernel/fork.c: detect early free of a live mm
mm: make counting of list_lru_one::nr_items lockless
mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static
block_invalidatepage(): only release page if the full page was invalidated
mm: kernel-doc: add missing parameter descriptions
mm/swap.c: remove @cold parameter description for release_pages()
mm/nommu: remove description of alloc_vm_area
zram: drop max_zpage_size and use zs_huge_class_size()
zsmalloc: introduce zs_huge_class_size()
mm: fix races between swapoff and flush dcache
fs/direct-io.c: minor cleanups in do_blockdev_direct_IO
...
|
|
Commit 841a915d20c7b2 ("printf: Do not have bprintf dereference pointers")
would preprocess various pointers that are dereferenced in the bprintf()
because the recording and printing are done at two different times. Some
pointers stayed dereferenced in the ring buffer because user space could
handle them (namely "%pS" and friends). Pointers that are not dereferenced
should not be processed immediately but instead just saved directly.
Cc: stable@vger.kernel.org
Fixes: 841a915d20c7b2 ("printf: Do not have bprintf dereference pointers")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
