summaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2021-03-13kasan: fix KASAN_STACK dependency for HW_TAGSAndrey Konovalov1-0/+1
There's a runtime failure when running HW_TAGS-enabled kernel built with GCC on hardware that doesn't support MTE. GCC-built kernels always have CONFIG_KASAN_STACK enabled, even though stack instrumentation isn't supported by HW_TAGS. Having that config enabled causes KASAN to issue MTE-only instructions to unpoison kernel stacks, which causes the failure. Fix the issue by disallowing CONFIG_KASAN_STACK when HW_TAGS is used. (The commit that introduced CONFIG_KASAN_HW_TAGS specified proper dependency for CONFIG_KASAN_STACK_ENABLE but not for CONFIG_KASAN_STACK.) Link: https://lkml.kernel.org/r/59e75426241dbb5611277758c8d4d6f5f9298dac.1615215441.git.andreyknvl@google.com Fixes: 6a63a63ff1ac ("kasan: introduce CONFIG_KASAN_HW_TAGS") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reported-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-08Merge git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-5/+0
Pull sparc updates from David Miller: "Just some more random bits from Al, including a conversion over to generic extables" * git://git.kernel.org:/pub/scm/linux/kernel/git/davem/sparc: sparc32: take ->thread.flags out sparc32: get rid of fake_swapper_regs sparc64: get rid of fake_swapper_regs sparc32: switch to generic extables sparc32: switch copy_user.S away from range exception table entries sparc32: get rid of range exception table entries in checksum_32.S sparc32: switch __bzero() away from range exception table entries sparc32: kill lookup_fault() sparc32: don't bother with lookup_fault() in __bzero()
2021-03-01Merge branch 'kmap-conversion-for-5.12' of ↵Linus Torvalds1-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull kmap conversion updates from David Sterba: "This contains changes regarding kmap API use and eg conversion from kmap_atomic to kmap_local_page. The API belongs to memory management but to save cross-tree dependency headaches we've agreed to take it through the btrfs tree because there are some trivial conversions possible, while the rest will need some time and getting the easy cases out of the way would be convenient. The changes can be grouped: - function exports, new helpers - new VM_BUG_ON for additional verification; it's been discussed if it should be VM_BUG_ON or BUG_ON, the former was chosen due to performance reasons - code replaced by relevant helpers" [ This is an updated version of a request that originally came in during the merge window, but I asked for some updates: https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/ which is why this got merge after the merge window closed. - Linus ] * 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: use copy_highpage() instead of 2 kmaps() btrfs: use memcpy_[to|from]_page() and kmap_local_page() mm/highmem: Add VM_BUG_ON() to mem*_page() calls mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page() mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page() mm/highmem: Lift memcpy_[to|from]_page to core
2021-02-26Merge branch 'work.sparc32' of ↵David S. Miller1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
2021-02-26ubsan: remove overflow checksAndrey Ryabinin3-134/+0
Since GCC 8.0 -fsanitize=signed-integer-overflow doesn't work with -fwrapv. -fwrapv makes signed overflows defines and GCC essentially disables ubsan checks. On GCC < 8.0 -fwrapv doesn't have influence on -fsanitize=signed-integer-overflow setting, so it kinda works but generates false-positves and violates uaccess rules: lib/iov_iter.o: warning: objtool: iovec_from_user()+0x22d: call to __ubsan_handle_add_overflow() with UACCESS enabled Disable signed overflow checks to avoid these problems. Remove unsigned overflow checks as well. Unsigned overflow appeared as side effect of commit cdf8a76fda4a ("ubsan: move cc-option tests into Kconfig"), but it never worked (kernel doesn't boot). And unsigned overflows are allowed by C standard, so it just pointless. Link: https://lkml.kernel.org/r/20210209232348.20510-1-ryabinin.a.a@gmail.com Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib/cmdline: remove an unneeded local variable in next_arg()Masahiro Yamada1-4/+3
The local variable 'next' is unneeded because you can simply advance the existing pointer 'args'. Link: https://lkml.kernel.org/r/20210201014707.3828753-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib: stackdepot: fix ignoring return value warningVijayanand Jitta1-2/+4
Fix the below ignoring return value warning for kstrtobool in is_stack_depot_disabled function. lib/stackdepot.c: In function 'is_stack_depot_disabled': lib/stackdepot.c:154:2: warning: ignoring return value of 'kstrtobool' declared with attribute 'warn_unused_result' [-Wunused-result] Link: https://lkml.kernel.org/r/1612163048-28026-1-git-send-email-vjitta@codeaurora.org Fixes: b9779abb09a8 ("lib: stackdepot: add support to disable stack depot") Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib: stackdepot: add support to disable stack depotVijayanand Jitta1-4/+28
Add a kernel parameter stack_depot_disable to disable stack depot. So that stack hash table doesn't consume any memory when stack depot is disabled. The use case is CONFIG_PAGE_OWNER without page_owner=on. Without this patch, stackdepot will consume the memory for the hashtable. By default, it's 8M which is never trivial. With this option, in CONFIG_PAGE_OWNER configured system, page_owner=off, stack_depot_disable in kernel command line, we could save the wasted memory for the hashtable. [akpm@linux-foundation.org: fix CONFIG_STACKDEPOT=n build] Link: https://lkml.kernel.org/r/1611749198-24316-2-git-send-email-vjitta@codeaurora.org Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Cc: Alexander Potapenko <glider@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib: stackdepot: add support to configure STACK_HASH_SIZEYogesh Lal2-2/+10
Use CONFIG_STACK_HASH_ORDER to configure STACK_HASH_SIZE. Aim is to have configurable value for STACK_HASH_SIZE, so depend on use case one can configure it. One example is of Page Owner, CONFIG_PAGE_OWNER works only if page_owner=on via kernel parameter on CONFIG_PAGE_OWNER configured system. Thus, unless admin enable it via command line option, the stackdepot will just waste 8M memory without any customer. Making it configurable and use lower value helps to enable features like CONFIG_PAGE_OWNER without any significant overhead. Link: https://lkml.kernel.org/r/1611749198-24316-1-git-send-email-vjitta@codeaurora.org Signed-off-by: Yogesh Lal <ylal@codeaurora.org> Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Vijayanand Jitta <vjitta@codeaurora.org> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26lib/genalloc.c: change return type to unsigned long for bitmap_set_llHuang Shijie1-1/+2
Just as bitmap_clear_ll(), change return type to unsigned long for bitmap_set_ll to avoid the possible overflow in future. Link: https://lkml.kernel.org/r/20210105031644.2771-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kasan, mm: fail krealloc on freed objectsAndrey Konovalov1-0/+20
Currently, if krealloc() is called on a freed object with KASAN enabled, it allocates and returns a new object, but doesn't copy any memory from the old one as ksize() returns 0. This makes the caller believe that krealloc() succeeded (KASAN report is printed though). This patch adds an accessibility check into __do_krealloc(). If the check fails, krealloc() returns NULL. This check duplicates the one in ksize(); this is fixed in the following patch. This patch also adds a KASAN-KUnit test to check krealloc() behaviour when it's called on a freed object. Link: https://lkml.kernel.org/r/cbcf7b02be0a1ca11de4f833f2ff0b3f2c9b00c8.1612546384.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kasan: rework krealloc testsAndrey Konovalov1-10/+81
This patch reworks KASAN-KUnit tests for krealloc() to: 1. Check both slab and page_alloc based krealloc() implementations. 2. Allow at least one full granule to fit between old and new sizes for each KASAN mode, and check accesses to that granule accordingly. Link: https://lkml.kernel.org/r/c707f128a2bb9f2f05185d1eb52192cf179cf4fa.1612546384.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence: add test suiteMarco Elver1-0/+13
Add KFENCE test suite, testing various error detection scenarios. Makes use of KUnit for test organization. Since KFENCE's interface to obtain error reports is via the console, the test verifies that KFENCE outputs expected reports to the console. [elver@google.com: fix typo in test] Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com [elver@google.com: show access type in report] Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence, Documentation: add KFENCE documentationMarco Elver1-0/+2
Add KFENCE documentation in dev-tools/kfence.rst, and add to index. [elver@google.com: add missing copyright header to documentation] Link: https://lkml.kernel.org/r/20210118092159.145934-4-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-8-elver@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Co-developed-by: Alexander Potapenko <glider@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26kfence, kasan: make KFENCE compatible with KASANAlexander Potapenko1-1/+1
Make KFENCE compatible with KASAN. Currently this helps test KFENCE itself, where KASAN can catch potential corruptions to KFENCE state, or other corruptions that may be a result of freepointer corruptions in the main allocators. [akpm@linux-foundation.org: merge fixup] [andreyknvl@google.com: untag addresses for KFENCE] Link: https://lkml.kernel.org/r/9dc196006921b191d25d10f6e611316db7da2efc.1611946152.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-7-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Jann Horn <jannh@google.com> Co-developed-by: Marco Elver <elver@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joern Engel <joern@purestorage.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: SeongJae Park <sjpark@amazon.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-26mm: add Kernel Electric-Fence infrastructureAlexander Potapenko2-0/+68
Patch series "KFENCE: A low-overhead sampling-based memory safety error detector", v7. This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. This series enables KFENCE for the x86 and arm64 architectures, and adds KFENCE hooks to the SLAB and SLUB allocators. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, the next allocation through the main allocator (SLAB or SLUB) returns a guarded allocation from the KFENCE object pool. At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. The KFENCE memory pool is of fixed size, and if the pool is exhausted no further KFENCE allocations occur. The default config is conservative with only 255 objects, resulting in a pool size of 2 MiB (with 4 KiB pages). We have verified by running synthetic benchmarks (sysbench I/O, hackbench) and production server-workload benchmarks that a kernel with KFENCE (using sample intervals 100-500ms) is performance-neutral compared to a non-KFENCE baseline kernel. KFENCE is inspired by GWP-ASan [1], a userspace tool with similar properties. The name "KFENCE" is a homage to the Electric Fence Malloc Debugger [2]. For more details, see Documentation/dev-tools/kfence.rst added in the series -- also viewable here: https://raw.githubusercontent.com/google/kasan/kfence/Documentation/dev-tools/kfence.rst [1] http://llvm.org/docs/GwpAsan.html [2] https://linux.die.net/man/3/efence This patch (of 9): This adds the Kernel Electric-Fence (KFENCE) infrastructure. KFENCE is a low-overhead sampling-based memory safety error detector of heap use-after-free, invalid-free, and out-of-bounds access errors. KFENCE is designed to be enabled in production kernels, and has near zero performance overhead. Compared to KASAN, KFENCE trades performance for precision. The main motivation behind KFENCE's design, is that with enough total uptime KFENCE will detect bugs in code paths not typically exercised by non-production test workloads. One way to quickly achieve a large enough total uptime is when the tool is deployed across a large fleet of machines. KFENCE objects each reside on a dedicated page, at either the left or right page boundaries. The pages to the left and right of the object page are "guard pages", whose attributes are changed to a protected state, and cause page faults on any attempted access to them. Such page faults are then intercepted by KFENCE, which handles the fault gracefully by reporting a memory access error. To detect out-of-bounds writes to memory within the object's page itself, KFENCE also uses pattern-based redzones. The following figure illustrates the page layout: ---+-----------+-----------+-----------+-----------+-----------+--- | xxxxxxxxx | O : | xxxxxxxxx | : O | xxxxxxxxx | | xxxxxxxxx | B : | xxxxxxxxx | : B | xxxxxxxxx | | x GUARD x | J : RED- | x GUARD x | RED- : J | x GUARD x | | xxxxxxxxx | E : ZONE | xxxxxxxxx | ZONE : E | xxxxxxxxx | | xxxxxxxxx | C : | xxxxxxxxx | : C | xxxxxxxxx | | xxxxxxxxx | T : | xxxxxxxxx | : T | xxxxxxxxx | ---+-----------+-----------+-----------+-----------+-----------+--- Guarded allocations are set up based on a sample interval (can be set via kfence.sample_interval). After expiration of the sample interval, a guarded allocation from the KFENCE object pool is returned to the main allocator (SLAB or SLUB). At this point, the timer is reset, and the next allocation is set up after the expiration of the interval. To enable/disable a KFENCE allocation through the main allocator's fast-path without overhead, KFENCE relies on static branches via the static keys infrastructure. The static branch is toggled to redirect the allocation to KFENCE. To date, we have verified by running synthetic benchmarks (sysbench I/O, hackbench) that a kernel compiled with KFENCE is performance-neutral compared to the non-KFENCE baseline. For more details, see Documentation/dev-tools/kfence.rst (added later in the series). [elver@google.com: fix parameter description for kfence_object_start()] Link: https://lkml.kernel.org/r/20201106092149.GA2851373@elver.google.com [elver@google.com: avoid stalling work queue task without allocations] Link: https://lkml.kernel.org/r/CADYN=9J0DQhizAGB0-jz4HOBBh+05kMBXb4c0cXMS7Qi5NAJiw@mail.gmail.com Link: https://lkml.kernel.org/r/20201110135320.3309507-1-elver@google.com [elver@google.com: fix potential deadlock due to wake_up()] Link: https://lkml.kernel.org/r/000000000000c0645805b7f982e4@google.com Link: https://lkml.kernel.org/r/20210104130749.1768991-1-elver@google.com [elver@google.com: add option to use KFENCE without static keys] Link: https://lkml.kernel.org/r/20210111091544.3287013-1-elver@google.com [elver@google.com: add missing copyright and description headers] Link: https://lkml.kernel.org/r/20210118092159.145934-1-elver@google.com Link: https://lkml.kernel.org/r/20201103175841.3495947-2-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: SeongJae Park <sjpark@amazon.de> Co-developed-by: Marco Elver <elver@google.com> Reviewed-by: Jann Horn <jannh@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Joern Engel <joern@purestorage.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-25Merge tag 'kbuild-v5.12' of ↵Linus Torvalds1-6/+43
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Fix false-positive build warnings for ARCH=ia64 builds - Optimize dictionary size for module compression with xz - Check the compiler and linker versions in Kconfig - Fix misuse of extra-y - Support DWARF v5 debug info - Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x exceeded the limit - Add generic syscall{tbl,hdr}.sh for cleanups across arches - Minor cleanups of genksyms - Minor cleanups of Kconfig * tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits) initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD kbuild: remove deprecated 'always' and 'hostprogs-y/m' kbuild: parse C= and M= before changing the working directory kbuild: reuse this-makefile to define abs_srctree kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig kconfig: omit --oldaskconfig option for 'make config' kconfig: fix 'invalid option' for help option kconfig: remove dead code in conf_askvalue() kconfig: clean up nested if-conditionals in check_conf() kconfig: Remove duplicate call to sym_get_string_value() Makefile: Remove # characters from compiler string Makefile: reuse CC_VERSION_TEXT kbuild: check the minimum linker version in Kconfig kbuild: remove ld-version macro scripts: add generic syscallhdr.sh scripts: add generic syscalltbl.sh arch: syscalls: remove $(srctree)/ prefix from syscall tables arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work gen_compile_commands: prune some directories kbuild: simplify access to the kernel's version ...
2021-02-25Merge tag 'pci-v5.12-changes' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Remove unnecessary locking around _OSC (Bjorn Helgaas) - Clarify message about _OSC failure (Bjorn Helgaas) - Remove notification of PCIe bandwidth changes (Bjorn Helgaas) - Tidy checking of syscall user config accessors (Heiner Kallweit) Resource management: - Decline to resize resources if boot config must be preserved (Ard Biesheuvel) - Fix pci_register_io_range() memory leak (Geert Uytterhoeven) Error handling (Keith Busch): - Clear error status from the correct device - Retain error recovery status so drivers can use it after reset - Log the type of Port (Root or Switch Downstream) that we reset - Always request a reset for Downstream Ports in frozen state Endpoint framework and NTB (Kishon Vijay Abraham I): - Make *_get_first_free_bar() take into account 64 bit BAR - Add helper API to get the 'next' unreserved BAR - Make *_free_bar() return error codes on failure - Remove unused pci_epf_match_device() - Add support to associate secondary EPC with EPF - Add support in configfs to associate two EPCs with EPF - Add pci_epc_ops to map MSI IRQ - Add pci_epf_ops to expose function-specific attrs - Allow user to create sub-directory of 'EPF Device' directory - Implement ->msi_map_irq() ops for cadence - Configure LM_EP_FUNC_CFG based on epc->function_num_map for cadence - Add EP function driver to provide NTB functionality - Add support for EPF PCI Non-Transparent Bridge - Add specification for PCI NTB function device - Add PCI endpoint NTB function user guide - Add configfs binding documentation for pci-ntb endpoint function Broadcom STB PCIe controller driver: - Add support for BCM4908 and external PERST# signal controller (Rafał Miłecki) Cadence PCIe controller driver: - Retrain Link to work around Gen2 training defect (Nadeem Athani) - Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof Wilczyński) Freescale Layerscape PCIe controller driver: - Add LX2160A rev2 EP mode support (Hou Zhiqiang) - Convert to builtin_platform_driver() (Michael Walle) MediaTek PCIe controller driver: - Fix OF node reference leak (Krzysztof Wilczyński) Microchip PolarFlare PCIe controller driver: - Add Microchip PolarFire PCIe controller driver (Daire McNamara) Qualcomm PCIe controller driver: - Use PHY_REFCLK_USE_PAD only for ipq8064 (Ansuel Smith) - Add support for ddrss_sf_tbu clock for sm8250 (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Drop PCIE_RCAR config option (Lad Prabhakar) - Always allocate MSI addresses in 32bit space (Marek Vasut) Rockchip PCIe controller driver: - Add FriendlyARM NanoPi M4B DT binding (Chen-Yu Tsai) - Make 'ep-gpios' DT property optional (Chen-Yu Tsai) Synopsys DesignWare PCIe controller driver: - Work around ECRC configuration hardware defect (Vidya Sagar) - Drop support for config space in DT 'ranges' (Rob Herring) - Change size to u64 for EP outbound iATU (Shradha Todi) - Add upper limit address for outbound iATU (Shradha Todi) - Make dw_pcie ops optional (Jisheng Zhang) - Remove unnecessary dw_pcie_ops from al driver (Jisheng Zhang) Xilinx Versal CPM PCIe controller driver: - Fix OF node reference leak (Pan Bian) Miscellaneous: - Remove tango host controller driver (Arnd Bergmann) - Remove IRQ handler & data together (altera-msi, brcmstb, dwc) (Martin Kaiser) - Fix xgene-msi race in installing chained IRQ handler (Martin Kaiser) - Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He) - Fix pci-bridge-emul array overruns (Russell King) - Remove obsolete uses of WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior)" * tag 'pci-v5.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (69 commits) PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064 PCI: qcom: Add support for ddrss_sf_tbu clock dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250 PCI: al: Remove useless dw_pcie_ops PCI: dwc: Don't assume the ops in dw_pcie always exist PCI: dwc: Add upper limit address for outbound iATU PCI: dwc: Change size to u64 for EP outbound iATU PCI: dwc: Drop support for config space in 'ranges' PCI: layerscape: Convert to builtin_platform_driver() PCI: layerscape: Add LX2160A rev2 EP mode support dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings PCI: dwc: Work around ECRC configuration issue PCI/portdrv: Report reset for frozen channel PCI/AER: Specify the type of Port that was reset PCI/ERR: Retain status from error notification PCI/AER: Clear AER status from Root Port when resetting Downstream Port PCI/ERR: Clear status of the reporting device dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B PCI: rockchip: Make 'ep-gpios' DT property optional Documentation: PCI: Add PCI endpoint NTB function user guide ...
2021-02-24kasan: don't run tests when KASAN is not enabledAndrey Konovalov1-0/+5
Don't run KASAN tests when it's disabled with kasan.mode=off to avoid corrupting kernel memory. Link: https://linux-review.googlesource.com/id/I6447af436a69a94bfc35477f6bf4e2122948355e Link: https://lkml.kernel.org/r/25bd4fb5cae7b421d806a1f33fb633edd313f0c7.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: add a test for kmem_cache_alloc/free_bulkAndrey Konovalov1-5/+33
Add a test for kmem_cache_alloc/free_bulk to make sure there are no false-positives when these functions are used. Link: https://linux-review.googlesource.com/id/I2a8bf797aecf81baeac61380c567308f319e263d Link: https://lkml.kernel.org/r/418122ebe4600771ac81e9ca6eab6740cf8dcfa1.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: add proper page allocator testsAndrey Konovalov1-5/+46
The currently existing page allocator tests rely on kmalloc fallback with large sizes that is only present for SLUB. Add proper tests that use alloc/free_pages(). Link: https://linux-review.googlesource.com/id/Ia173d5a1b215fe6b2548d814ef0f4433cf983570 Link: https://lkml.kernel.org/r/a2648930e55ff75b8e700f2e0d905c2b55a67483.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: fix bug detection via ksize for HW_TAGS modeAndrey Konovalov1-0/+20
The currently existing kasan_check_read/write() annotations are intended to be used for kernel modules that have KASAN compiler instrumentation disabled. Thus, they are only relevant for the software KASAN modes that rely on compiler instrumentation. However there's another use case for these annotations: ksize() checks that the object passed to it is indeed accessible before unpoisoning the whole object. This is currently done via __kasan_check_read(), which is compiled away for the hardware tag-based mode that doesn't rely on compiler instrumentation. This leads to KASAN missing detecting some memory corruptions. Provide another annotation called kasan_check_byte() that is available for all KASAN modes. As the implementation rename and reuse kasan_check_invalid_free(). Use this new annotation in ksize(). To avoid having ksize() as the top frame in the reported stack trace pass _RET_IP_ to __kasan_check_byte(). Also add a new ksize_uaf() test that checks that a use-after-free is detected via ksize() itself, and via plain accesses that happen later. Link: https://linux-review.googlesource.com/id/Iaabf771881d0f9ce1b969f2a62938e99d3308ec5 Link: https://lkml.kernel.org/r/f32ad74a60b28d8402482a38476f02bb7600f620.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: fix memory corruption in kasan_bitops_tags testAndrey Konovalov1-5/+5
Since the hardware tag-based KASAN mode might not have a redzone that comes after an allocated object (when kasan.mode=prod is enabled), the kasan_bitops_tags() test ends up corrupting the next object in memory. Change the test so it always accesses the redzone that lies within the allocated object's boundaries. Link: https://linux-review.googlesource.com/id/I67f51d1ee48f0a8d0fe2658c2a39e4879fe0832a Link: https://lkml.kernel.org/r/7d452ce4ae35bb1988d2c9244dfea56cf2cc9315.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: adapt kmalloc_uaf2 test to HW_TAGS modeAndrey Konovalov1-0/+11
In the kmalloc_uaf2() test, the pointers to the two allocated memory blocks might happen to be the same, and the test will fail. With the software tag-based mode, the probability of the that is 1/254, so it's hard to observe the failure. For the hardware tag-based mode though, the probablity is 1/14, which is quite noticable. Allow up to 16 attempts at generating different tags for the tag-based modes. Link: https://linux-review.googlesource.com/id/Ibfa458ef2804ff465d8eb07434a300bf36388d55 Link: https://lkml.kernel.org/r/9cd5cf2f633dcbf55cab801cd26845d2b075cec7.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: add compiler barriers to KUNIT_EXPECT_KASAN_FAILAndrey Konovalov1-5/+12
It might not be obvious to the compiler that the expression must be executed between writing and reading to fail_data. In this case, the compiler might reorder or optimize away some of the accesses, and the tests will fail. Add compiler barriers around the expression in KUNIT_EXPECT_KASAN_FAIL and use READ/WRITE_ONCE() for accessing fail_data fields. Link: https://linux-review.googlesource.com/id/I046079f48641a1d36fe627fc8827a9249102fd50 Link: https://lkml.kernel.org/r/6f11596f367d8ae8f71d800351e9a5d91eda19f6.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: rename CONFIG_TEST_KASAN_MODULEAndrey Konovalov2-2/+2
Rename CONFIG_TEST_KASAN_MODULE to CONFIG_KASAN_MODULE_TEST. This naming is more consistent with the existing CONFIG_KASAN_KUNIT_TEST. Link: https://linux-review.googlesource.com/id/Id347dfa5fe8788b7a1a189863e039f409da0ae5f Link: https://lkml.kernel.org/r/f08250246683981bcf8a094fbba7c361995624d2.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan, arm64: allow using KUnit tests with HW_TAGS modeAndrey Konovalov2-15/+31
On a high level, this patch allows running KUnit KASAN tests with the hardware tag-based KASAN mode. Internally, this change reenables tag checking at the end of each KASAN test that triggers a tag fault and leads to tag checking being disabled. Also simplify is_write calculation in report_tag_fault. With this patch KASAN tests are still failing for the hardware tag-based mode; fixes come in the next few patches. [andreyknvl@google.com: export HW_TAGS symbols for KUnit tests] Link: https://lkml.kernel.org/r/e7eeb252da408b08f0c81b950a55fb852f92000b.1613155970.git.andreyknvl@google.com Link: https://linux-review.googlesource.com/id/Id94dc9eccd33b23cda4950be408c27f879e474c8 Link: https://lkml.kernel.org/r/51b23112cf3fd62b8f8e9df81026fa2b15870501.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Marco Elver <elver@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: add match-all tag testsAndrey Konovalov1-0/+92
Add 3 new tests for tag-based KASAN modes: 1. Check that match-all pointer tag is not assigned randomly. 2. Check that 0xff works as a match-all pointer tag. 3. Check that there are no match-all memory tags. Note, that test #3 causes a significant number (255) of KASAN reports to be printed during execution for the SW_TAGS mode. [arnd@arndb.de: export kasan_poison] Link: https://lkml.kernel.org/r/20210125112831.2156212-1-arnd@kernel.org [akpm@linux-foundation.org: s/EXPORT_SYMBOL_GPL/EXPORT_SYMBOL/, per Andrey] Link: https://linux-review.googlesource.com/id/I78f1375efafa162b37f3abcb2c5bc2f3955dfd8e Link: https://lkml.kernel.org/r/da841a5408e2204bf25f3b23f70540a65844e8a4.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: add macros to simplify checking test constraintsAndrey Konovalov1-70/+31
Some KASAN tests require specific kernel configs to be enabled. Instead of copy-pasting the checks for these configs add a few helper macros and use them. Link: https://linux-review.googlesource.com/id/I237484a7fddfedf4a4aae9cc61ecbcdbe85a0a63 Link: https://lkml.kernel.org/r/6a0fcdb9676b7e869cfc415893ede12d916c246c.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Alexander Potapenko <glider@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24kasan: clean up comments in testsAndrey Konovalov2-25/+39
Clarify and update comments in KASAN tests. Link: https://linux-review.googlesource.com/id/I6c816c51fa1e0eb7aa3dead6bda1f339d2af46c8 Link: https://lkml.kernel.org/r/ba6db104d53ae0e3796f80ef395f6873c1c1282f.1610733117.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-23Merge tag 'modules-for-v5.12' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: - Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export types were introduced between 2006 - 2008. All the of the unused symbols have been long removed and gpl future symbols were converted to gpl quite a long time ago, and I don't believe these export types have been used ever since. So, I think it should be safe to retire those export types now (Christoph Hellwig) - Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig) - Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as it is the only caller (Christoph Hellwig) - Unexport find_module() and module_mutex and fix the last module callers to not rely on these anymore. Make module_mutex internal to the module loader (Christoph Hellwig) - Harden ELF checks on module load and validate ELF structures before checking the module signature (Frank van der Linden) - Fix undefined symbol warning for clang (Fangrui Song) - Fix smatch warning (Dan Carpenter) * tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: potential uninitialized return in module_kallsyms_on_each_symbol() module: remove EXPORT_UNUSED_SYMBOL* module: remove EXPORT_SYMBOL_GPL_FUTURE module: move struct symsearch to module.c module: pass struct find_symbol_args to find_symbol module: merge each_symbol_section into find_symbol module: remove each_symbol_in_section module: mark module_mutex static kallsyms: only build {,module_}kallsyms_on_each_symbol when required kallsyms: refactor {,module_}kallsyms_on_each_symbol module: use RCU to synchronize find_module module: unexport find_module and module_mutex drm: remove drm_fb_helper_modinit powerpc/powernv: remove get_cxl_module module: harden ELF info handling module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
2021-02-22Merge tag 'fs_for_v5.12-rc1' of ↵Linus Torvalds1-11/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull isofs, udf, and quota updates from Jan Kara: "Several udf, isofs, and quota fixes" * tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: parser: Fix kernel-doc markups udf: handle large user and group ID isofs: handle large user and group ID parser: add unsigned int parser udf: fix silent AED tagLocation corruption isofs: release buffer head before return quota: Fix memory leak when handling corrupted quota file
2021-02-22Merge tag 'printk-for-5.12' of ↵Linus Torvalds3-6/+45
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - New "no_hash_pointers" kernel parameter causes that %p shows raw pointer values instead of hashed ones. It is intended only for debugging purposes. Misuse is prevented by a fat warning message that is inspired by trace_printk(). - Prevent a possible deadlock when flushing printk_safe buffers during panic(). - Fix performance regression caused by the lockless printk ringbuffer. It was visible with huge log buffer and long messages. - Documentation fix-up. * tag 'printk-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: lib/vsprintf: no_hash_pointers prints all addresses as unhashed kselftest: add support for skipped tests lib: use KSTM_MODULE_GLOBALS macro in kselftest drivers printk: avoid prb_first_valid_seq() where possible printk: fix deadlock when kernel panic printk: rectify kernel-doc for prb_rec_init_wr()
2021-02-22Merge tag 'linux-kselftest-kunit-5.12-rc1' of ↵Linus Torvalds3-15/+118
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan - support for filtering test suites using glob from Daniel Latypov. "kunit_filter.glob" command line option is passed to the UML kernel, which currently only supports filtering by suite name. This support allows running different subsets of tests, e.g. $ ./tools/testing/kunit/kunit.py build $ ./tools/testing/kunit/kunit.py exec 'list*' $ ./tools/testing/kunit/kunit.py exec 'kunit*' - several fixes and cleanups also from Daniel Latypov. * tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: fix unintentional statefulness in run_kernel() kunit: tool: add support for filtering suites by glob kunit: add kunit.filter_glob cmdline option to filter suites kunit: don't show `1 == 1` in failed assertion messages kunit: make kunit_tool accept optional path to .kunitconfig fragment Documentation: kunit: add tips.rst for small examples KUnit: Docs: make start.rst example Kconfig follow style.rst kunit: tool: simplify kconfig is_subset_of() logic minor: kunit: tool: fix unit test so it can run from non-root dir kunit: tool: use `with open()` in unit test kunit: tool: stop using bare asserts in unit test kunit: tool: fix unit test cleanup handling
2021-02-22Merge tag 'docs-5.12' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle in docsland. - As promised, the minimum Sphinx version to build the docs is now 1.7, and we have dropped support for Python 2 entirely. That allowed the removal of a bunch of compatibility code. - A set of treewide warning fixups from Mauro that I applied after it became clear nobody else was going to deal with them. - The automarkup mechanism can now create cross-references from relative paths to RST files. - More translations, typo fixes, and warning fixes" * tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits) docs: kernel-hacking: be more civil docs: Remove the Microsoft rhetoric Documentation/admin-guide: kernel-parameters: Update nohlt section doc/admin-guide: fix spelling mistake: "perfomance" -> "performance" docs: Document cross-referencing using relative path docs: Enable usage of relative paths to docs on automarkup docs: thermal: fix spelling mistakes Documentation: admin-guide: Update kvm/xen config option docs: Make syscalls' helpers naming consistent coding-style.rst: Avoid comma statements Documentation: /proc/loadavg: add 3 more field descriptions Documentation/submitting-patches: Add blurb about backtraces in commit messages Docs: drop Python 2 support Move our minimum Sphinx version to 1.7 Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams scripts/kernel-doc: add internal hyperlink to DOC: sections Update Documentation/admin-guide/sysctl/fs.rst docs: Update DTB format references docs: zh_CN: add iio index.rst translation docs/zh_CN: add iio ep93xx_adc.rst translation ...
2021-02-22Merge tag 'gpio-updates-for-v5.12' of ↵Linus Torvalds2-4/+73
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "It's been a relatively calm release cycle and we're actually removing more code than we're adding. Summary: - new driver for the Toshiba Visconti platform - rework of interrupt handling in gpio-tegra - updates for GPIO selftests: we're now using the character device to perform the subsystem checks - support for a new rcar variant + some code refactoring - refactoring of gpio-ep93xx - SPDX License identifier has been updated in the uapi header so that userspace programs bundling it can become fully REUSE-compliant - improvements to pwm handling in gpio-mvebu - support for interrupt handling and power management for gpio-xilinx as well as some code refactoring - support for a new chip variant in gpio-pca953x - removal of drivers: zte xs & intel-mid and removal of leftovers from intel-msic - impovements to intel drivers pulled from Andy Shevchenko - improvements to the gpio-aggregator virtual GPIO driver - and several minor tweaks and fixes to code and documentation all over the place" * tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits) gpio: pcf857x: Fix missing first interrupt gpio: ep93xx: refactor base IRQ number gpio: ep93xx: refactor ep93xx_gpio_add_bank gpio: ep93xx: Fix typo s/hierarchial/hierarchical gpio: ep93xx: drop to_irq binding gpio: ep93xx: Fix wrong irq numbers in port F gpio: uapi: use the preferred SPDX license identifier gpio: gpio-xilinx: Add check if width exceeds 32 gpio: gpio-xilinx: Add support for suspend and resume gpio: gpio-xilinx: Add interrupt support gpio: gpio-xilinx: Reduce spinlock array to array gpio: gpio-xilinx: Simplify with dev_err_probe() gpio: msic: Drop driver from Makefile gpio: wcove: Split out to_ireg() helper and deduplicate the code gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits() gpio: wcove: Get rid of error prone casting in IRQ handler gpio: intel-mid: Remove driver for deprecated platform gpio: msic: Remove driver for deprecated platform gpio: aggregator: Remove trailing comma in terminator entries gpio: aggregator: Use compound literal from the header ...
2021-02-22Merge tag 'regulator-v5.12' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite an active release for driver specific updates but very little going on at the subsystem level this time for the regulator API. Summary: - Overhaul of the Qualcomm LABIBB driver. - Allow use of regulator_sync_voltage() on coupled regulators. - Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm PCM8180/c and PM8009-1 and Richtek RT4831 - Removal of the AB3100 driver" * tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits) regulator: bd718x7, bd71828, Fix dvs voltage levels regulator: pca9450: Add sd-vsel GPIO regulator: pca9450: Enable system reset on WDOG_B assertion regulator: pca9450: Add SD_VSEL GPIO for LDO5 regulator: qcom-rpmh: fix pm8009 ldo7 regulator: mt6315: Add support for MT6315 regulator regulator: document binding for MT6315 regulator regulator: dt-bindings: Document charger-supply for max8997 regulator: qcom-labibb: Use disable_irq_nosync from isr regulator: pf8x00: Fix typo for PF8200 chip name regulator: pf8x00: set ramp_delay for bucks regulator: core: Avoid debugfs: Directory ... already present! error regulator: pf8x00: Add suspend support regulator: Make regulator_sync_voltage() usable by coupled regulators regulator: s5m8767: Drop regulators OF node reference regulator: qcom-rpmh: Add pmc8180 and pmc8180c regulator: qcom-rpmh: Add pmc8180 and pmc8180c regulator: s5m8767: Fix reference count leak regulator: remove ab3100 driver regulator: axp20x: Fix reference cout leak ...
2021-02-21Merge branch 'linus' of ↵Linus Torvalds2-40/+13
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Restrict crypto_cipher to internal API users only. Algorithms: - Add x86 aesni acceleration for cts. - Improve x86 aesni acceleration for xts. - Remove x86 acceleration of some uncommon algorithms. - Remove RIPE-MD, Tiger and Salsa20. - Remove tnepres. - Add ARM acceleration for BLAKE2s and BLAKE2b. Drivers: - Add Keem Bay OCS HCU driver. - Add Marvell OcteonTX2 CPT PF driver. - Remove PicoXcell driver. - Remove mediatek driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (154 commits) hwrng: timeriomem - Use device-managed registration API crypto: hisilicon/qm - fix printing format issue crypto: hisilicon/qm - do not reset hardware when CE happens crypto: hisilicon/qm - update irqflag crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2' crypto: hisilicon/qm - fix request missing error crypto: hisilicon/qm - removing driver after reset crypto: octeontx2 - fix -Wpointer-bool-conversion warning crypto: hisilicon/hpre - enable Elliptic curve cryptography crypto: hisilicon - PASID fixed on Kunpeng 930 crypto: hisilicon/qm - fix use of 'dma_map_single' crypto: hisilicon/hpre - tiny fix crypto: hisilicon/hpre - adapt the number of clusters crypto: cpt - remove casting dma_alloc_coherent crypto: keembay-ocs-aes - Fix 'q' assignment during CCM B0 generation crypto: xor - Fix typo of optimization hwrng: optee - Use device-managed registration API crypto: arm64/crc-t10dif - move NEON yield to C code crypto: arm64/aes-ce-mac - simplify NEON yield crypto: arm64/aes-neonbs - remove NEON yield calls ...
2021-02-21Merge tag 'media/v5.12-1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some core fixes in VB2 mem2mem support - some improvements and cleanups in V4L2 async kAPI - newer controls in V4L2 API for H-264 and HEVC codecs - allegro-dvt driver was promoted from staging - new i2c sendor drivers: imx334, ov5648, ov8865 - new automobile camera module: rdacm21 - ipu3 cio2 driver started gained support for some ACPI BIOSes - new ATSC frontend: MaxLinear mxl692 VSB tuner/demod - the SMIA/CCS driver gained more support for CSS standard - several driver fixes, updates and improvements * tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits) media: v4l: async: Fix kerneldoc documentation for async functions media: i2c: max9271: Add MODULE_* macros media: i2c: Kconfig: Make MAX9271 a module media: imx334: 'ret' is uninitialized, should have been PTR_ERR() media: i2c: Add imx334 camera sensor driver media: dt-bindings: media: Add bindings for imx334 media: ov8856: Configure sensor for GRBG Bayer for all modes media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control media: ov5675: fix vflip/hflip control media: ipu3-cio2: Build bridge only if ACPI is enabled media: Remove the legacy v4l2-clk API media: ov6650: Use the generic clock framework media: mt9m111: Use the generic clock framework media: ov9640: Use the generic clock framework media: pxa_camera: Drop the v4l2-clk clock register media: mach-pxa: Register the camera sensor fixed-rate clock media: i2c: imx258: get clock from device properties and enable it via runtime PM media: i2c: imx258: simplify getting state container media: i2c: imx258: add support for binding via device tree media: dt-bindings: media: imx258: add bindings for IMX258 sensor ...
2021-02-21Merge tag 'sched-core-2021-02-17' of ↵Linus Torvalds1-19/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Core scheduler updates: - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the preempt=none/voluntary/full boot options (default: full), to allow distros to build a PREEMPT kernel but fall back to close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via a boot time selection. There's also the /debug/sched_debug switch to do this runtime. This feature is implemented via runtime patching (a new variant of static calls). The scope of the runtime patching can be best reviewed by looking at the sched_dynamic_update() function in kernel/sched/core.c. ( Note that the dynamic none/voluntary mode isn't 100% identical, for example preempt-RCU is available in all cases, plus the preempt count is maintained in all models, which has runtime overhead even with the code patching. ) The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority of distributions, are supposed to be unaffected. - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that was found via rcutorture triggering a hang. The bug is that rcu_idle_enter() may wake up a NOCB kthread, but this happens after the last generic need_resched() check. Some cpuidle drivers fix it by chance but many others don't. In true 2020 fashion the original bug fix has grown into a 5-patch scheduler/RCU fix series plus another 16 RCU patches to address the underlying issue of missed preemption events. These are the initial fixes that should fix current incarnations of the bug. - Clean up rbtree usage in the scheduler, by providing & using the following consistent set of rbtree APIs: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass. This is a 4-commit series where each commit improves one aspect of the idle sibling scan logic. - Improve the cpufreq cooling driver by getting the effective CPU utilization metrics from the scheduler - Improve the fair scheduler's active load-balancing logic by reducing the number of active LB attempts & lengthen the load-balancing interval. This improves stress-ng mmapfork performance. - Fix CFS's estimated utilization (util_est) calculation bug that can result in too high utilization values Misc updates & fixes: - Fix the HRTICK reprogramming & optimization feature - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code - Reduce dl_add_task_root_domain() overhead - Fix uprobes refcount bug - Process pending softirqs in flush_smp_call_function_from_idle() - Clean up task priority related defines, remove *USER_*PRIO and USER_PRIO() - Simplify the sched_init_numa() deduplication sort - Documentation updates - Fix EAS bug in update_misfit_status(), which degraded the quality of energy-balancing - Smaller cleanups" * tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) sched,x86: Allow !PREEMPT_DYNAMIC entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point entry: Explicitly flush pending rcuog wakeup before last rescheduling point rcu/nocb: Trigger self-IPI on late deferred wake up before user resume rcu/nocb: Perform deferred wake up before last idle's need_resched() check rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers sched/features: Distinguish between NORMAL and DEADLINE hrtick sched/features: Fix hrtick reprogramming sched/deadline: Reduce rq lock contention in dl_add_task_root_domain() uprobes: (Re)add missing get_uprobe() in __find_uprobe() smp: Process pending softirqs in flush_smp_call_function_from_idle() sched: Harden PREEMPT_DYNAMIC static_call: Allow module use without exposing static_call_key sched: Add /debug/sched_preempt preempt/dynamic: Support dynamic preempt with preempt= boot option preempt/dynamic: Provide irqentry_exit_cond_resched() static call preempt/dynamic: Provide preempt_schedule[_notrace]() static calls preempt/dynamic: Provide cond_resched() and might_resched() static calls preempt: Introduce CONFIG_PREEMPT_DYNAMIC static_call: Provide DEFINE_STATIC_CALL_RET0() ...
2021-02-21Merge tag 'locking-core-2021-02-17' of ↵Linus Torvalds3-5/+340
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Core locking primitives updates: - Remove mutex_trylock_recursive() from the API - no users left - Simplify + constify the futex code a bit Lockdep updates: - Teach lockdep about local_lock_t - Add CONFIG_DEBUG_IRQFLAGS=y debug config option to check for potentially unsafe IRQ mask restoration patterns. (I.e. calling raw_local_irq_restore() with IRQs enabled.) - Add wait context self-tests - Fix graph lock corner case corrupting internal data structures - Fix noinstr annotations LKMM updates: - Simplify the litmus tests - Documentation fixes KCSAN updates: - Re-enable KCSAN instrumentation in lib/random32.c Misc fixes: - Don't branch-trace static label APIs - DocBook fix - Remove stale leftover empty file" * tag 'locking-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) checkpatch: Don't check for mutex_trylock_recursive() locking/mutex: Kill mutex_trylock_recursive() s390: Use arch_local_irq_{save,restore}() in early boot code lockdep: Noinstr annotate warn_bogus_irq_restore() locking/lockdep: Avoid unmatched unlock locking/rwsem: Remove empty rwsem.h locking/rtmutex: Add missing kernel-doc markup futex: Remove unneeded gotos futex: Change utime parameter to be 'const ... *' lockdep: report broken irq restoration jump_label: Do not profile branch annotations locking: Add Reviewers locking/selftests: Add local_lock inversion tests locking/lockdep: Exclude local_lock_t from IRQ inversions locking/lockdep: Clean up check_redundant() a bit locking/lockdep: Add a skip() function to __bfs() locking/lockdep: Mark local_lock_t locking/selftests: More granular debug_locks_verbose lockdep/selftest: Add wait context selftests tools/memory-model: Fix typo in klitmus7 compatibility table ...
2021-02-21Merge tag 'core-rcu-2021-02-17' of ↵Linus Torvalds1-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "These are the latest RCU updates for v5.12: - Documentation updates. - Miscellaneous fixes. - kfree_rcu() updates: Addition of mem_dump_obj() to provide allocator return addresses to more easily locate bugs. This has a couple of RCU-related commits, but is mostly MM. Was pulled in with akpm's agreement. - Per-callback-batch tracking of numbers of callbacks, which enables better debugging information and smarter reactions to large numbers of callbacks. - The first round of changes to allow CPUs to be runtime switched from and to callback-offloaded state. - CONFIG_PREEMPT_RT-related changes. - RCU CPU stall warning updates. - Addition of polling grace-period APIs for SRCU. - Torture-test and torture-test scripting updates, including a "torture everything" script that runs rcutorture, locktorture, scftorture, rcuscale, and refscale. Plus does an allmodconfig build. - nolibc fixes for the torture tests" * tag 'core-rcu-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits) percpu_ref: Dump mem_dump_obj() info upon reference-count underflow rcu: Make call_rcu() print mem_dump_obj() info for double-freed callback mm: Make mem_obj_dump() vmalloc() dumps include start and length mm: Make mem_dump_obj() handle vmalloc() memory mm: Make mem_dump_obj() handle NULL and zero-sized pointers mm: Add mem_dump_obj() to print source of memory block tools/rcutorture: Fix position of -lgcc in mkinitrd.sh tools/nolibc: Fix position of -lgcc in the documented example tools/nolibc: Emit detailed error for missing alternate syscall number definitions tools/nolibc: Remove incorrect definitions of __ARCH_WANT_* tools/nolibc: Get timeval, timespec and timezone from linux/time.h tools/nolibc: Implement poll() based on ppoll() tools/nolibc: Implement fork() based on clone() tools/nolibc: Make getpgrp() fall back to getpgid(0) tools/nolibc: Make dup2() rely on dup3() when available tools/nolibc: Add the definition for dup() rcutorture: Add rcutree.use_softirq=0 to RUDE01 and TASKS01 torture: Maintain torture-specific set of CPUs-online books torture: Clean up after torture-test CPU hotplugging rcutorture: Make object_debug also double call_rcu() heap object ...
2021-02-21Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+19
Pull core block updates from Jens Axboe: "Another nice round of removing more code than what is added, mostly due to Christoph's relentless pursuit of tech debt removal/cleanups. This pull request contains: - Two series of BFQ improvements (Paolo, Jan, Jia) - Block iov_iter improvements (Pavel) - bsg error path fix (Pan) - blk-mq scheduler improvements (Jan) - -EBUSY discard fix (Jan) - bvec allocation improvements (Ming, Christoph) - bio allocation and init improvements (Christoph) - Store bdev pointer in bio instead of gendisk + partno (Christoph) - Block trace point cleanups (Christoph) - hard read-only vs read-only split (Christoph) - Block based swap cleanups (Christoph) - Zoned write granularity support (Damien) - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)" * tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits) mm: simplify swapdev_block sd_zbc: clear zone resources for non-zoned case block: introduce blk_queue_clear_zone_settings() zonefs: use zone write granularity as block size block: introduce zone_write_granularity limit block: use blk_queue_set_zoned in add_partition() nullb: use blk_queue_set_zoned() to setup zoned devices nvme: cleanup zone information initialization block: document zone_append_max_bytes attribute block: use bi_max_vecs to find the bvec pool md/raid10: remove dead code in reshape_request block: mark the bio as cloned in bio_iov_bvec_set block: set BIO_NO_PAGE_REF in bio_iov_bvec_set block: remove a layer of indentation in bio_iov_iter_get_pages block: turn the nr_iovecs argument to bio_alloc* into an unsigned short block: remove the 1 and 4 vec bvec_slabs entries block: streamline bvec_alloc block: factor out a bvec_alloc_gfp helper block: move struct biovec_slab to bio.c block: reuse BIO_INLINE_VECS for integrity bvecs ...
2021-02-20Merge tag 'x86_misc_for_v5.12' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 misc updates from Borislav Petkov: - Complete the MSR write filtering by applying it to the MSR ioctl interface too. - Other misc small fixups. * tag 'x86_misc_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MSR: Filter MSR writes through X86_IOC_WRMSR_REGS ioctl too selftests/fpu: Fix debugfs_simple_attr.cocci warning selftests/x86: Use __builtin_ia32_read/writeeflags x86/reboot: Add Zotac ZBOX CI327 nano PCI reboot quirk
2021-02-17PCI: Fix pci_register_io_range() memory leakGeert Uytterhoeven1-0/+3
Kmemleak reports: unreferenced object 0xc328de40 (size 64): comm "kworker/1:1", pid 21, jiffies 4294938212 (age 1484.670s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 e0 d8 fc eb 00 00 00 00 ................ 00 00 10 fe 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ad758d10>] pci_register_io_range+0x3c/0x80 [<2c7f139e>] of_pci_range_to_resource+0x48/0xc0 [<f079ecc8>] devm_of_pci_get_host_bridge_resources.constprop.0+0x2ac/0x3ac [<e999753b>] devm_of_pci_bridge_init+0x60/0x1b8 [<a895b229>] devm_pci_alloc_host_bridge+0x54/0x64 [<e451ddb0>] rcar_pcie_probe+0x2c/0x644 In case a PCI host driver's probe is deferred, the same I/O range may be allocated again, and be ignored, causing a memory leak. Fix this by (a) letting logic_pio_register_range() return -EEXIST if the passed range already exists, so pci_register_io_range() will free it, and by (b) making pci_register_io_range() not consider -EEXIST an error condition. Link: https://lore.kernel.org/r/20210202100332.829047-1-geert+renesas@glider.be Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-02-17rbtree, timerqueue: Use rb_add_cached()Peter Zijlstra1-19/+9
Reduce rbtree boiler plate by using the new helpers. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Davidlohr Bueso <dbueso@suse.de>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-6/+1
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-02-16 The following pull-request contains BPF updates for your *net-next* tree. There's a small merge conflict between 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") from net-next tree and 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows: [...] lock_sock(sk); err = tcp_zerocopy_receive(sk, &zc, &tss); err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname, &zc, &len, err); release_sock(sk); [...] We've added 116 non-merge commits during the last 27 day(s) which contain a total of 156 files changed, 5662 insertions(+), 1489 deletions(-). The main changes are: 1) Adds support of pointers to types with known size among global function args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov. 2) Add bpf_iter for task_vma which can be used to generate information similar to /proc/pid/maps, from Song Liu. 3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow rewriting bind user ports from BPF side below the ip_unprivileged_port_start range, both from Stanislav Fomichev. 4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map as well as per-cpu maps for the latter, from Alexei Starovoitov. 5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer for sleepable programs, both from KP Singh. 6) Extend verifier to enable variable offset read/write access to the BPF program stack, from Andrei Matei. 7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to query device MTU from programs, from Jesper Dangaard Brouer. 8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF tracing programs, from Florent Revest. 9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when otherwise too many passes are required, from Gary Lin. 10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function verification both related to zero-extension handling, from Ilya Leoshkevich. 11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa. 12) Batch of AF_XDP selftest cleanups and small performance improvement for libbpf's xsk map redirect for newer kernels, from Björn Töpel. 13) Follow-up BPF doc and verifier improvements around atomics with BPF_FETCH, from Brendan Jackman. 14) Permit zero-sized data sections e.g. if ELF .rodata section contains read-only data from local variables, from Yonghong Song. 15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Kconfig: allow explicit opt in to DWARF v5Nick Desaulniers1-0/+18
DWARF v5 is the latest standard of the DWARF debug info format. GCC 11 will change the implicit default DWARF version, if left unspecified, to DWARF v5. Allow users of Clang and older versions of GCC that have not changed the implicit default DWARF version to DWARF v5 to opt in. This can help testing consumers of DWARF debug info in preparation of v5 becoming more widespread, as well as result in significant binary size savings of the pre-stripped vmlinux image. DWARF5 wins significantly in terms of size when mixed with compression (CONFIG_DEBUG_INFO_COMPRESSED). 363M vmlinux.clang12.dwarf5.compressed 434M vmlinux.clang12.dwarf4.compressed 439M vmlinux.clang12.dwarf2.compressed 457M vmlinux.clang12.dwarf5 536M vmlinux.clang12.dwarf4 548M vmlinux.clang12.dwarf2 515M vmlinux.gcc10.2.dwarf5.compressed 599M vmlinux.gcc10.2.dwarf4.compressed 624M vmlinux.gcc10.2.dwarf2.compressed 630M vmlinux.gcc10.2.dwarf5 765M vmlinux.gcc10.2.dwarf4 809M vmlinux.gcc10.2.dwarf2 Though the quality of debug info is harder to quantify; size is not a proxy for quality. Jakub notes: One thing is GCC DWARF-5 support, that is whether the compiler will support -gdwarf-5 flag, and that support should be there from GCC 7 onwards. All [GCC] 5.1 - 6.x did was start accepting -gdwarf-5 as experimental option that enabled some small DWARF subset (initially only a few DW_LANG_* codes newly added to DWARF5 drafts). Only GCC 7 (released after DWARF 5 has been finalized) started emitting DWARF5 section headers and got most of the DWARF5 changes in... Another separate thing is whether the assembler does support the -gdwarf-5 option (i.e. if you can compile assembler files with -Wa,-gdwarf-5) ... That option is about whether the assembler will emit DWARF5 or DWARF2 .debug_line. It is fine to compile C sources with -gdwarf-5 and use DWARF2 .debug_line for assembler files if as doesn't support it. Version check GCC so that we don't need to worry about the difference in command line args between GNU readelf and llvm-readelf/llvm-dwarfdump to validate the DWARF Version in the assembler feature detection script. Most issues with clang produced assembler were fixed in binutils 2.35.1, but 2.35.2 fixed issues related to requiring the flag -Wa,-gdwarf-5 explicitly. The added shell script test checks for the latter, and is only required when using clang without its integrated assembler, though we use for clang regardless as we do not yet have a way to query the assembler from Kconfig. Disabled for now if CONFIG_DEBUG_INFO_BTF is set; pahole doesn't yet recognize the new additions to the DWARF debug info. This only modifies the DWARF version emitted by the compiler, not the assembler. The DWARF version of a binary can be validated with: $ llvm-dwarfdump <object file> | head -n 4 | grep version or $ readelf --debug-dump=info <object file> 2>/dev/null | grep Version Parts of the tree don't reuse DEBUG_CFLAGS as they should; such cleanup is left as a follow up. Link: http://www.dwarfstd.org/doc/DWARF5.pdf Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707 Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Caroline Tice <cmtice@google.com> Suggested-by: Fangrui Song <maskray@google.com> Suggested-by: Jakub Jelinek <jakub@redhat.com> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v12.0.0-rc1 x86-64 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-16Kbuild: make DWARF version a choiceNick Desaulniers1-5/+25
Adds a default CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT which allows the implicit default version of DWARF emitted by the toolchain to progress over time. Modifies CONFIG_DEBUG_INFO_DWARF4 to be a member of a choice, making it mutually exclusive with CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT. Users may want to select this if they are using a newer toolchain, but have consumers of the DWARF debug info that aren't yet ready for newer DWARF versions' debug info. Does so in a way that's forward compatible with existing configs, and makes adding future versions more straightforward. This patch does not change the current behavior or selection of DWARF version for users upgrading to kernels with this patch. GCC since ~4.8 has defaulted to DWARF v4 implicitly, and GCC 11 has bumped this to v5. Remove the Kconfig help text about DWARF v4 being larger. It's empirically false for the latest toolchains for x86_64 defconfig, has no point of reference (I suspect it was DWARF v2 but that's stil empirically false), and debug info size is not a qualatative measure. Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Fangrui Song <maskray@google.com> Suggested-by: Jakub Jelinek <jakub@redhat.com> Suggested-by: Mark Wielaard <mark@klomp.org> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-15lib/parman: Delete newlineJefferson Carpenter1-1/+0
Signed-off-by: Jefferson Carpenter <jeffersoncarpenter2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>