summaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2019-03-05kasan: remove use after scope bugs detection.Andrey Ryabinin3-35/+0
Use after scope bugs detector seems to be almost entirely useless for the linux kernel. It exists over two years, but I've seen only one valid bug so far [1]. And the bug was fixed before it has been reported. There were some other use-after-scope reports, but they were false-positives due to different reasons like incompatibility with structleak plugin. This feature significantly increases stack usage, especially with GCC < 9 version, and causes a 32K stack overflow. It probably adds performance penalty too. Given all that, let's remove use-after-scope detector entirely. While preparing this patch I've noticed that we mistakenly enable use-after-scope detection for clang compiler regardless of CONFIG_KASAN_EXTRA setting. This is also fixed now. [1] http://lkml.kernel.org/r/<20171129052106.rhgbjhhis53hkgfn@wfg-t540p.sh.intel.com> Link: http://lkml.kernel.org/r/20190111185842.13978-1-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Will Deacon <will.deacon@arm.com> [arm64] Cc: Qian Cai <cai@lca.pw> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+22
2019-03-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+2
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-03-04 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add AF_XDP support to libbpf. Rationale is to facilitate writing AF_XDP applications by offering higher-level APIs that hide many of the details of the AF_XDP uapi. Sample programs are converted over to this new interface as well, from Magnus. 2) Introduce a new cant_sleep() macro for annotation of functions that cannot sleep and use it in BPF_PROG_RUN() to assert that BPF programs run under preemption disabled context, from Peter. 3) Introduce per BPF prog stats in order to monitor the usage of BPF; this is controlled by kernel.bpf_stats_enabled sysctl knob where monitoring tools can make use of this to efficiently determine the average cost of programs, from Alexei. 4) Split up BPF selftest's test_progs similarly as we already did with test_verifier. This allows to further reduce merge conflicts in future and to get more structure into our quickly growing BPF selftest suite, from Stanislav. 5) Fix a bug in BTF's dedup algorithm which can cause an infinite loop in some circumstances; also various BPF doc fixes and improvements, from Andrii. 6) Various BPF sample cleanups and migration to libbpf in order to further isolate the old sample loader code (so we can get rid of it at some point), from Jakub. 7) Add a new BPF helper for BPF cgroup skb progs that allows to set ECN CE code point and a Host Bandwidth Manager (HBM) sample program for limiting the bandwidth used by v2 cgroups, from Lawrence. 8) Enable write access to skb->queue_mapping from tc BPF egress programs in order to let BPF pick TX queue, from Jesper. 9) Fix a bug in BPF spinlock handling for map-in-map which did not propagate spin_lock_off to the meta map, from Yonghong. 10) Fix a bug in the new per-CPU BPF prog counters to properly initialize stats for each CPU, from Eric. 11) Add various BPF helper prototypes to selftest's bpf_helpers.h, from Willem. 12) Fix various BPF samples bugs in XDP and tracing progs, from Toke, Daniel and Yonghong. 13) Silence preemption splat in test_bpf after BPF_PROG_RUN() enforces it now everywhere, from Anders. 14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to get error handling working, from Dan. 15) Fix bpftool documentation and auto-completion with regards to stream_{verdict,parser} attach types, from Alban. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01kasan: turn off asan-stack for clang-8 and earlierArnd Bergmann1-0/+22
Building an arm64 allmodconfig kernel with clang results in over 140 warnings about overly large stack frames, the worst ones being: drivers/gpu/drm/panel/panel-sitronix-st7789v.c:196:12: error: stack frame size of 20224 bytes in function 'st7789v_prepare' drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c:196:12: error: stack frame size of 13120 bytes in function 'td028ttec1_panel_enable' drivers/usb/host/max3421-hcd.c:1395:1: error: stack frame size of 10048 bytes in function 'max3421_spi_thread' drivers/net/wan/slic_ds26522.c:209:12: error: stack frame size of 9664 bytes in function 'slic_ds26522_probe' drivers/crypto/ccp/ccp-ops.c:2434:5: error: stack frame size of 8832 bytes in function 'ccp_run_cmd' drivers/media/dvb-frontends/stv0367.c:1005:12: error: stack frame size of 7840 bytes in function 'stv0367ter_algo' None of these happen with gcc today, and almost all of these are the result of a single known issue in llvm. Hopefully it will eventually get fixed with the clang-9 release. In the meantime, the best idea I have is to turn off asan-stack for clang-8 and earlier, so we can produce a kernel that is safe to run. I have posted three patches that address the frame overflow warnings that are not addressed by turning off asan-stack, so in combination with this change, we get much closer to a clean allmodconfig build, which in turn is necessary to do meaningful build regression testing. It is still possible to turn on the CONFIG_ASAN_STACK option on all versions of clang, and it's always enabled for gcc, but when CONFIG_COMPILE_TEST is set, the option remains invisible, so allmodconfig and randconfig builds (which are normally done with a forced CONFIG_COMPILE_TEST) will still result in a mostly clean build. Link: http://lkml.kernel.org/r/20190222222950.3997333-1-arnd@arndb.de Link: https://bugs.llvm.org/show_bug.cgi?id=38809 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Qian Cai <cai@lca.pw> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-25bpf: test_bpf: turn off preemption in function __run_onceAnders Roxell1-0/+2
When running BPF test suite the following splat occurs: [ 415.930950] test_bpf: #0 TAX jited:0 [ 415.931067] BUG: assuming atomic context at lib/test_bpf.c:6674 [ 415.946169] in_atomic(): 0, irqs_disabled(): 0, pid: 11556, name: modprobe [ 415.953176] INFO: lockdep is turned off. [ 415.957207] CPU: 1 PID: 11556 Comm: modprobe Tainted: G W 5.0.0-rc7-next-20190220 #1 [ 415.966328] Hardware name: HiKey Development Board (DT) [ 415.971592] Call trace: [ 415.974069] dump_backtrace+0x0/0x160 [ 415.977761] show_stack+0x24/0x30 [ 415.981104] dump_stack+0xc8/0x114 [ 415.984534] __cant_sleep+0xf0/0x108 [ 415.988145] test_bpf_init+0x5e0/0x1000 [test_bpf] [ 415.992971] do_one_initcall+0x90/0x428 [ 415.996837] do_init_module+0x60/0x1e4 [ 416.000614] load_module+0x1de0/0x1f50 [ 416.004391] __se_sys_finit_module+0xc8/0xe0 [ 416.008691] __arm64_sys_finit_module+0x24/0x30 [ 416.013255] el0_svc_common+0x78/0x130 [ 416.017031] el0_svc_handler+0x38/0x78 [ 416.020806] el0_svc+0x8/0xc Rework so that preemption is disabled when we loop over function 'BPF_PROG_RUN(...)'. Fixes: 568f196756ad ("bpf: check that BPF programs run with preemption disabled") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+5
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22rhashtable: Remove obsolete rhashtable_walk_init functionHerbert Xu2-8/+3
The rhashtable_walk_init function has been obsolete for more than two years. This patch finally converts its last users over to rhashtable_walk_enter and removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-21lib/test_rhashtable: fix spelling mistake "existant" -> "existent"Colin Ian King1-2/+2
There are spelling mistakes in warning macro messages. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-20Merge branch 'fixes-v5.1-rc6' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull keys fixes from James Morris: - Handle quotas better, allowing full quota to be reached. - Fix the creation of shortcuts in the assoc_array internal representation when the index key needs to be an exact multiple of the machine word size. - Fix a dependency loop between the request_key contruction record and the request_key authentication key. The construction record isn't really necessary and can be dispensed with. - Set the timestamp on a new key rather than leaving it as 0. This would ordinarily be fine - provided the system clock is never set to a time before 1970 * 'fixes-v5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: keys: Timestamp new keys keys: Fix dependency loop between construction record and auth key assoc_array: Fix shortcut creation KEYS: allow reaching the keys quotas exactly
2019-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Two easily resolvable overlapping change conflicts, one in TCP and one in the eBPF verifier. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-16Merge tag 'compiler-attributes-for-linus-v5.0-rc7' of ↵Linus Torvalds1-2/+2
git://github.com/ojeda/linux Pull compiler attributes fixes from Miguel Ojeda: "Clean the new GCC 9 -Wmissing-attributes warnings The upcoming GCC 9 release extends the -Wmissing-attributes warnings (enabled by -Wall) to C and aliases: it warns when particular function attributes are missing in the aliases but not in their target, e.g.: void __cold f(void) {} void __alias("f") g(void); diagnoses: warning: 'g' specifies less restrictive attribute than its target 'f': 'cold' [-Wmissing-attributes] These patch series clean these new warnings. Most of them are caused by the module_init/exit macros" Link: https://lore.kernel.org/lkml/20190125104353.2791-1-labbott@redhat.com/ * tag 'compiler-attributes-for-linus-v5.0-rc7' of git://github.com/ojeda/linux: include/linux/module.h: copy __init/__exit attrs to init/cleanup_module Compiler Attributes: add support for __copy (gcc >= 9) lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pure
2019-02-15assoc_array: Fix shortcut creationDavid Howells1-3/+5
Fix the creation of shortcuts for which the length of the index key value is an exact multiple of the machine word size. The problem is that the code that blanks off the unused bits of the shortcut value malfunctions if the number of bits in the last word equals machine word size. This is due to the "<<" operator being given a shift of zero in this case, and so the mask that should be all zeros is all ones instead. This causes the subsequent masking operation to clear everything rather than clearing nothing. Ordinarily, the presence of the hash at the beginning of the tree index key makes the issue very hard to test for, but in this case, it was encountered due to a development mistake that caused the hash output to be either 0 (keyring) or 1 (non-keyring) only. This made it susceptible to the keyctl/unlink/valid test in the keyutils package. The fix is simply to skip the blanking if the shift would be 0. For example, an index key that is 64 bits long would produce a 0 shift and thus a 'blank' of all 1s. This would then be inverted and AND'd onto the index_key, incorrectly clearing the entire last word. Fixes: 3cb989501c26 ("Add a generic associative array implementation.") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-02-15lib/crc32.c: mark crc32_le_base/__crc32c_le_base aliases as __pureMiguel Ojeda1-2/+2
The upcoming GCC 9 release extends the -Wmissing-attributes warnings (enabled by -Wall) to C and aliases: it warns when particular function attributes are missing in the aliases but not in their target. In particular, it triggers here because crc32_le_base/__crc32c_le_base aren't __pure while their target crc32_le/__crc32c_le are. These aliases are used by architectures as a fallback in accelerated versions of CRC32. See commit 9784d82db3eb ("lib/crc32: make core crc32() routines weak so they can be overridden"). Therefore, being fallbacks, it is likely that even if the aliases were called from C, there wouldn't be any optimizations possible. Currently, the only user is arm64, which calls this from asm. Still, marking the aliases as __pure makes sense and is a good idea for documentation purposes and possible future optimizations, which also silences the warning. Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2019-02-14lib: objagg: fix handling of object with 0 users when assembling hintsJiri Pirko1-3/+5
It is possible that there might be an originally parent object with 0 direct users that is in hints no longer considered as parent. Then the weight of this object is 0 and current code ignores him. That's why the total amount of hint objects might be lower than for the original objagg and WARN_ON is hit. Fix this be considering 0 weight valid. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13test_objagg: Uninitialized variable in error handlingDan Carpenter1-2/+3
We need to set the error message on this path otherwise some of the callers, such as test_hints_case(), print from an uninitialized pointer. We had a similar bug earlier and set "errmsg" to NULL in the caller, test_delta_action_item(). That code is no longer required so I have removed it. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13test_objagg: Test the correct variableDan Carpenter1-2/+2
There is a typo here. We intended to check "objagg2" but we instead test "objagg" which is not an error pointer. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13lib: objagg: Fix an error code in objagg_hints_get()Dan Carpenter1-1/+3
We need to set the error code on this path otherwise we return ERR_PTR(0) which would result in a NULL dereference in the caller. Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08lib: objagg: add root count to statsJiri Pirko1-0/+4
Count number of roots and add it to stats. It is handy for the library user to have this stats available as it can act upon it without counting roots itself. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08lib: objagg: implement optimization hints assembly and use hints for object ↵Jiri Pirko2-18/+749
creation Implement simple greedy algo to find more optimized root-delta tree for a given objagg instance. This "hints" can be used by a driver to: 1) check if the hints are better (driver's choice) than the original objagg tree. Driver does comparison of objagg stats and hints stats. 2) use the hints to create a new objagg instance which will construct the root-delta tree according to the passed hints. Currently, only a simple greedy algorithm is implemented. Basically it finds the roots according to the maximal possible user count including deltas. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08lib: objagg: fix typo in objagg_stats_put() docstringJiri Pirko1-1/+1
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-8/+15
Pull networking fixes from David Miller: "This pull request is dedicated to the upcoming snowpocalypse parts 2 and 3 in the Pacific Northwest: 1) Drop profiles are broken because some drivers use dev_kfree_skb* instead of dev_consume_skb*, from Yang Wei. 2) Fix IWLWIFI kconfig deps, from Luca Coelho. 3) Fix percpu maps updating in bpftool, from Paolo Abeni. 4) Missing station release in batman-adv, from Felix Fietkau. 5) Fix some networking compat ioctl bugs, from Johannes Berg. 6) ucc_geth must reset the BQL queue state when stopping the device, from Mathias Thore. 7) Several XDP bug fixes in virtio_net from Toshiaki Makita. 8) TSO packets must be sent always on queue 0 in stmmac, from Jose Abreu. 9) Fix socket refcounting bug in RDS, from Eric Dumazet. 10) Handle sparse cpu allocations in bpf selftests, from Martynas Pumputis. 11) Make sure mgmt frames have enough tailroom in mac80211, from Felix Feitkau. 12) Use safe list walking in sctp_sendmsg() asoc list traversal, from Greg Kroah-Hartman. 13) Make DCCP's ccid_hc_[rt]x_parse_options always check for NULL ccid, from Eric Dumazet. 14) Need to reload WoL password into bcmsysport device after deep sleeps, from Florian Fainelli. 15) Remove filter from mask before freeing in cls_flower, from Petr Machata. 16) Missing release and use after free in error paths of s390 qeth code, from Julian Wiedmann. 17) Fix lockdep false positive in dsa code, from Marc Zyngier. 18) Fix counting of ATU violations in mv88e6xxx, from Andrew Lunn. 19) Fix EQ firmware assert in qed driver, from Manish Chopra. 20) Don't default Caivum PTP to Y in kconfig, from Bjorn Helgaas" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net: dsa: b53: Fix for failure when irq is not defined in dt sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach() geneve: should not call rt6_lookup() when ipv6 was disabled net: Don't default Cavium PTP driver to 'y' net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: via-velocity: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tehuti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: sun: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fsl_ucc_hdlc: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: fec_mpc52xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: smsc: epic100: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: dscc4: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: tulip: de2104x: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net: defxx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles net/mlx5e: Don't overwrite pedit action when multiple pedit used net/mlx5e: Update hw flows when encap source mac changed qed*: Advance drivers version to 8.37.0.20 qed: Change verbosity for coalescing message. qede: Fix system crash on configuring channels. qed: Consider TX tcs while deriving the max num_queues for PF. ...
2019-02-01lib/test_kmod.c: potential double free in error handlingDan Carpenter1-1/+1
There is a copy and paste bug so we set "config->test_driver" to NULL twice instead of setting "config->test_fs". Smatch complains that it leads to a double free: lib/test_kmod.c:840 __kmod_config_init() warn: 'config->test_fs' double freed Link: http://lkml.kernel.org/r/20190121140011.GA14283@kadam Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-31lib/test_rhashtable: Make test_insert_dup() allocate its hash table dynamicallyBart Van Assche1-8/+15
The test_insert_dup() function from lib/test_rhashtable.c passes a pointer to a stack object to rhltable_init(). Allocate the hash table dynamically to avoid that the following is reported with object debugging enabled: ODEBUG: object (ptrval) is on stack (ptrval), but NOT annotated. WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:368 __debug_object_init+0x312/0x480 Modules linked in: EIP: __debug_object_init+0x312/0x480 Call Trace: ? debug_object_init+0x1a/0x20 ? __init_work+0x16/0x30 ? rhashtable_init+0x1e1/0x460 ? sched_clock_cpu+0x57/0xe0 ? rhltable_init+0xb/0x20 ? test_insert_dup+0x32/0x20f ? trace_hardirqs_on+0x38/0xf0 ? ida_dump+0x10/0x10 ? jhash+0x130/0x130 ? my_hashfn+0x30/0x30 ? test_rht_init+0x6aa/0xab4 ? ida_dump+0x10/0x10 ? test_rhltable+0xc5c/0xc5c ? do_one_initcall+0x67/0x28e ? trace_hardirqs_off+0x22/0xe0 ? restore_all_kernel+0xf/0x70 ? trace_hardirqs_on_thunk+0xc/0x10 ? restore_all_kernel+0xf/0x70 ? kernel_init_freeable+0x142/0x213 ? rest_init+0x230/0x230 ? kernel_init+0x10/0x110 ? schedule_tail_wrapper+0x9/0xc ? ret_from_fork+0x19/0x24 Cc: Thomas Graf <tgraf@suug.ch> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22Merge tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds2-50/+99
Pull XArray fixes from Matthew Wilcox: "Fix some oversights in the XArray porcelain API: - support for m68k's two-byte aligned pointers - reserving entries using xa_insert() - missing xa_insert_bh() and xa_insert_irq() functions - simplify using xa_for_each() - use lockdep correctly - a few other minor fixes and improvements" * tag 'xarray-5.0-rc3' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix an arithmetic error in xa_is_err XArray tests: Check mark 2 gets squashed XArray: Fix typo in comment XArray: Honour reserved entries in xa_insert XArray: Permit storing 2-byte-aligned pointers XArray: Change xa_for_each iterator XArray: Turn xa_init_flags into a static inline XArray tests: Add RCU locking
2019-01-21fix int_sqrt64() for very large numbersFlorian La Roche1-1/+1
If an input number x for int_sqrt64() has the highest bit set, then fls64(x) is 64. (1UL << 64) is an overflow and breaks the algorithm. Subtracting 1 is a better guess for the initial value of m anyway and that's what also done in int_sqrt() implicitly [*]. [*] Note how int_sqrt() uses __fls() with two underscores, which already returns the proper raw bit number. In contrast, int_sqrt64() used fls64(), and that returns bit numbers illogically starting at 1, because of error handling for the "no bits set" case. Will points out that he bug probably is due to a copy-and-paste error from the regular int_sqrt() case. Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-15sbitmap: Protect swap_lock from hardirqMing Lei1-2/+3
Because we may call blk_mq_get_driver_tag() directly from blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may come and the above DEADLOCK is triggered. Commit ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to fix this issue by using 'spin_lock_bh', which isn't enough because we complete request from hardirq context direclty in case of multiqueue. Cc: Clark Williams <williams@redhat.com> Fixes: ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-14XArray tests: Check mark 2 gets squashedMatthew Wilcox1-3/+3
We do not currently check that the loop in xas_squash_marks() doesn't have an off-by-one error in it. It didn't, but a patch which introduced an off-by-one error wasn't caught by any existing test. Switch the roles of XA_MARK_1 and XA_MARK_2 to catch that bug. Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-15sbitmap: Protect swap_lock from softirqsSteven Rostedt (VMware)1-10/+2
The swap_lock used by sbitmap has a chain with locks taken from softirq, but the swap_lock is not protected from being preempted by softirqs. A chain exists of: sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock Where the sbq->ws[i].wait lock can be taken from softirq context, which means all locks below it in the chain must also be protected from softirqs. Reported-by: Clark Williams <williams@redhat.com> Fixes: 58ab5e32e6fd ("sbitmap: silence bogus lockdep IRQ warning") Fixes: ea86ea2cdced ("sbitmap: amortize cost of clearing bits") Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06XArray: Honour reserved entries in xa_insertMatthew Wilcox2-3/+46
xa_insert() should treat reserved entries as occupied, not as available. Also, it should treat requests to insert a NULL pointer as a request to reserve the slot. Add xa_insert_bh() and xa_insert_irq() for completeness. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06XArray: Permit storing 2-byte-aligned pointersMatthew Wilcox2-9/+43
On m68k, statically allocated pointers may only be two-byte aligned. This clashes with the XArray's method for tagging internal pointers. Permit storing these pointers in single slots (ie not in multislots). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06XArray: Change xa_for_each iteratorMatthew Wilcox1-6/+5
There were three problems with this API: 1. It took too many arguments; almost all users wanted to iterate over every element in the array rather than a subset. 2. It required that 'index' be initialised before use, and there's no realistic way to make GCC catch that. 3. 'index' and 'entry' were the opposite way round from every other member of the XArray APIs. So split it into three different APIs: xa_for_each(xa, index, entry) xa_for_each_start(xa, index, entry, start) xa_for_each_marked(xa, index, entry, filter) Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06XArray: Turn xa_init_flags into a static inlineMatthew Wilcox1-29/+0
A regular xa_init_flags() put all dynamically-initialised XArrays into the same locking class. That leads to lockdep believing that taking one XArray lock while holding another is a deadlock. It's possible to work around some of these situations with separate locking classes for irq/bh/regular XArrays, and SINGLE_DEPTH_NESTING, but that's ugly, and it doesn't work for all situations (where we have completely unrelated XArrays). Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06XArray tests: Add RCU lockingMatthew Wilcox1-0/+2
0day picked up that I'd forgotten to add locking to this new test. Signed-off-by: Matthew Wilcox <willy@infradead.org>
2019-01-06Merge tag 'kbuild-v4.21-3' of ↵Linus Torvalds2-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
2019-01-05Merge tag 'for-linus-20190104' of git://git.kernel.dk/linux-blockLinus Torvalds3-38/+54
Pull block updates and fixes from Jens Axboe: - Pulled in MD changes that Shaohua had queued up for 4.21. Unfortunately we lost Shaohua late 2018, I'm sending these in on his behalf. - In conjunction with the above, I added a CREDITS entry for Shaoua. - sunvdc queue restart fix (Ming) * tag 'for-linus-20190104' of git://git.kernel.dk/linux-block: Add CREDITS entry for Shaohua Li block: sunvdc: don't run hw queue synchronously from irq context md: fix raid10 hang issue caused by barrier raid10: refactor common wait code from regular read/write request md: remvoe redundant condition check lib/raid6: add option to skip algo benchmarking lib/raid6: sort algos in rough performance order lib/raid6: check for assembler SSSE3 support lib/raid6: avoid __attribute_const__ redefinition lib/raid6: add missing include for raid6test md: remove set but not used variable 'bi_rdev'
2019-01-06kbuild: remove redundant target cleaning on failureMasahiro Yamada1-3/+2
Since commit 9c2af1c7377a ("kbuild: add .DELETE_ON_ERROR special target"), the target file is automatically deleted on failure. The boilerplate code ... || { rm -f $@; false; } is unneeded. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada1-1/+1
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2019-01-05lib/genalloc.c: include vmalloc.hOlof Johansson1-0/+1
Fixes build break on most ARM/ARM64 defconfigs: lib/genalloc.c: In function 'gen_pool_add_virt': lib/genalloc.c:190:10: error: implicit declaration of function 'vzalloc_node'; did you mean 'kzalloc_node'? lib/genalloc.c:190:8: warning: assignment to 'struct gen_pool_chunk *' from 'int' makes pointer from integer without a cast [-Wint-conversion] lib/genalloc.c: In function 'gen_pool_destroy': lib/genalloc.c:254:3: error: implicit declaration of function 'vfree'; did you mean 'kfree'? Fixes: 6862d2fc8185 ('lib/genalloc.c: use vzalloc_node() to allocate the bitmap') Cc: Huang Shijie <sjhuang@iluvatar.ai> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-05Merge branch 'for-linus' of ↵Linus Torvalds1-27/+27
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull trivial vfs updates from Al Viro: "A few cleanups + Neil's namespace_unlock() optimization" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: exec: make prepare_bprm_creds static genheaders: %-<width>s had been there since v6; %-*s - since v7 VFS: use synchronize_rcu_expedited() in namespace_unlock() iov_iter: reduce code duplication
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-16/+19
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-04lib/genalloc.c: use vzalloc_node() to allocate the bitmapHuang Shijie1-2/+2
Some devices may have big memory on chip, such as over 1G. In some cases, the nbytes maybe bigger then 4M which is the bounday of the memory buddy system (4K default). So use vzalloc_node() to allocate the bitmap. Also use vfree to free it. Link: http://lkml.kernel.org/r/20181225015701.6289-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04lib/find_bit_benchmark.c: align test_find_next_and_bit with othersYury Norov1-6/+5
Contrary to other tests, test_find_next_and_bit() test uses tab formatting in output and get_cycles() instead of ktime_get(). get_cycles() is not supported by some arches, so ktime_get() fits better in generic code. Fix it and minor style issues, so the output looks like this: Start testing find_bit() with random-filled bitmap find_next_bit: 7142816 ns, 163282 iterations find_next_zero_bit: 8545712 ns, 164399 iterations find_last_bit: 6332032 ns, 163282 iterations find_first_bit: 20509424 ns, 16606 iterations find_next_and_bit: 4060016 ns, 73424 iterations Start testing find_bit() with sparse bitmap find_next_bit: 55984 ns, 656 iterations find_next_zero_bit: 19197536 ns, 327025 iterations find_last_bit: 65088 ns, 656 iterations find_first_bit: 5923712 ns, 656 iterations find_next_and_bit: 29088 ns, 1 iterations Link: http://lkml.kernel.org/r/20181123174803.10916-1-ynorov@caviumnetworks.com Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: "Norov, Yuri" <Yuri.Norov@cavium.com> Cc: Clement Courbet <courbet@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunkAlexey Skidanov1-8/+12
gen_pool_alloc_algo() uses different allocation functions implementing different allocation algorithms. With gen_pool_first_fit_align() allocation function, the returned address should be aligned on the requested boundary. If chunk start address isn't aligned on the requested boundary, the returned address isn't aligned too. The only way to get properly aligned address is to initialize the pool with chunks aligned on the requested boundary. If want to have an ability to allocate buffers aligned on different boundaries (for example, 4K, 1MB, ...), the chunk start address should be aligned on the max possible alignment. This happens because gen_pool_first_fit_align() looks for properly aligned memory block without taking into account the chunk start address alignment. To fix this, we provide chunk start address to gen_pool_first_fit_align() and change its implementation such that it starts looking for properly aligned block with appropriate offset (exactly as is done in CMA). Link: https://lkml.kernel.org/lkml/a170cf65-6884-3592-1de9-4c235888cc8a@intel.com Link: http://lkml.kernel.org/r/1541690953-4623-1-git-send-email-alexey.skidanov@intel.com Signed-off-by: Alexey Skidanov <alexey.skidanov@intel.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04make 'user_access_begin()' do 'access_ok()'Linus Torvalds2-8/+10
Originally, the rule used to be that you'd have to do access_ok() separately, and then user_access_begin() before actually doing the direct (optimized) user access. But experience has shown that people then decide not to do access_ok() at all, and instead rely on it being implied by other operations or similar. Which makes it very hard to verify that the access has actually been range-checked. If you use the unsafe direct user accesses, hardware features (either SMAP - Supervisor Mode Access Protection - on x86, or PAN - Privileged Access Never - on ARM) do force you to use user_access_begin(). But nothing really forces the range check. By putting the range check into user_access_begin(), we actually force people to do the right thing (tm), and the range check vill be visible near the actual accesses. We have way too long a history of people trying to avoid them. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds3-8/+8
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03Merge branch 'for-next' of ↵Jens Axboe3-38/+54
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md into for-linus Pull the pending 4.21 changes for md from Shaohua. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md: fix raid10 hang issue caused by barrier raid10: refactor common wait code from regular read/write request md: remvoe redundant condition check lib/raid6: add option to skip algo benchmarking lib/raid6: sort algos in rough performance order lib/raid6: check for assembler SSSE3 support lib/raid6: avoid __attribute_const__ redefinition lib/raid6: add missing include for raid6test md: remove set but not used variable 'bi_rdev'
2019-01-02Merge tag 's390-4.21-1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A larger update for the zcrypt / AP bus code: + Update two inline assemblies in the zcrypt driver to make gcc happy + Add a missing reply code for invalid special commands for zcrypt + Allow AP device reset to be triggered from user space + Split the AP scan function into smaller, more readable functions - Updates for vfio-ccw and vfio-ap + Add maintainers and reviewer for vfio-ccw + Include facility.h in vfio_ap_drv.c to avoid fragile include chain + Simplicy vfio-ccw state machine - Use the common code version of bust_spinlocks - Make use of the DEFINE_SHOW_ATTRIBUTE - Fix three incorrect file permissions in the DASD driver - Remove bit spin-lock from the PCI interrupt handler - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code * tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: rework ap scan bus code s390/zcrypt: make sysfs reset attribute trigger queue reset s390/pci: fix sleeping in atomic during hotplug s390/pci: remove bit_lock usage in interrupt handler s390/drivers: fix proc/debugfs file permissions s390: convert to DEFINE_SHOW_ATTRIBUTE MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer vfio: ccw: Merge BUSY and BOXED states s390: use common bust_spinlocks() s390/zcrypt: improve special ap message cmd handling s390/ap: rework assembler functions to use unions for in/out register variables s390: vfio-ap: include <asm/facility> for test_facility()
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds2-3/+158
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2018-12-31Merge tag 'trace-v4.21' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Rework of the kprobe/uprobe and synthetic events to consolidate all the dynamic event code. This will make changes in the future easier. - Partial rewrite of the function graph tracing infrastructure. This will allow for multiple users of hooking onto functions to get the callback (return) of the function. This is the ground work for having kprobes and function graph tracer using one code base. - Clean up of the histogram code that will facilitate adding more features to the histograms in the future. - Addition of str_has_prefix() and a few use cases. There currently is a similar function strstart() that is used in a few places, but only returns a bool and not a length. These instances will be removed in the future to use str_has_prefix() instead. - A few other various clean ups as well. * tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits) tracing: Use the return of str_has_prefix() to remove open coded numbers tracing: Have the historgram use the result of str_has_prefix() for len of prefix tracing: Use str_has_prefix() instead of using fixed sizes tracing: Use str_has_prefix() helper for histogram code string.h: Add str_has_prefix() helper function tracing: Make function ‘ftrace_exports’ static tracing: Simplify printf'ing in seq_print_sym tracing: Avoid -Wformat-nonliteral warning tracing: Merge seq_print_sym_short() and seq_print_sym_offset() tracing: Add hist trigger comments for variable-related fields tracing: Remove hist trigger synth_var_refs tracing: Use hist trigger's var_ref array to destroy var_refs tracing: Remove open-coding of hist trigger var_ref management tracing: Use var_refs[] for hist trigger reference checking tracing: Change strlen to sizeof for hist trigger static strings tracing: Remove unnecessary hist trigger struct field tracing: Fix ftrace_graph_get_ret_stack() to use task and not current seq_buf: Use size_t for len in seq_buf_puts() seq_buf: Make seq_buf_puts() null-terminate the buffer arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack ...
2018-12-29Merge tag 'kconfig-v4.21' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 06:19:01 +0000