summaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2020-02-20bootconfig: Reject subkey and value on same parent keyMasami Hiramatsu1-4/+12
Reject if a value node is mixed with subkey node on same parent key node. A value node can not co-exist with subkey node under some key node, e.g. key = value key.subkey = another-value This is not be allowed because bootconfig API is not designed to handle such case. Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10bootconfig: Allocate xbc_nodes array dynamicallyMasami Hiramatsu1-3/+12
To reduce the large static array from kernel data, allocate xbc_nodes array dynamically only if the kernel loads a bootconfig. Note that this also add dummy memblock.h for user-spacae bootconfig tool. Link: http://lkml.kernel.org/r/158108569699.3187.6512834527603883707.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-10bootconfig: Remove unneeded CONFIG_LIBXBCMasami Hiramatsu2-4/+1
Since there is no user except CONFIG_BOOT_CONFIG and no plan to use it from other functions, CONFIG_LIBXBC can be removed and we can use CONFIG_BOOT_CONFIG directly. Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2 Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05tools/bootconfig: Show the number of bootconfig nodesMasami Hiramatsu1-1/+4
Show the number of bootconfig nodes when applying new bootconfig to initrd. Since there are limitations of bootconfig not only in its filesize, but also the number of nodes, the number should be shown when applying so that user can get the feeling of scale of current bootconfig. Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-02-05bootconfig: Add more parse error messagesMasami Hiramatsu1-4/+12
Add more error messages for following cases. - Exceeding max number of nodes - Config tree data is empty (e.g. comment only) - Config data is empty or exceeding max size - bootconfig is already initialized Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-01-13bootconfig: Add Extra Boot Config supportMasami Hiramatsu3-0/+808
Extra Boot Config (XBC) allows admin to pass a tree-structured boot configuration file when boot up the kernel. This extends the kernel command line in an efficient way. Boot config will contain some key-value commands, e.g. key.word = value1 another.key.word = value2 It can fold same keys with braces, also you can write array data. For example, key { word1 { setting1 = data setting2 } word2.array = "val1", "val2" } User can access these key-value pair and tree structure via SKC APIs. Link: http://lkml.kernel.org/r/157867221257.17873.1775090991929862549.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-12-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+2
Pull vfs fixes from Al Viro: "Eric's s_inodes softlockup fixes + Jan's fix for recent regression from pipe rework" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: call fsnotify_sb_delete after evict_inodes fs: avoid softlockups in s_inodes iterators pipe: Fix bogus dereference in iov_iter_alignment()
2019-12-22Merge tag 'block-5.5-20191221' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block fixes from Jens Axboe: "Let's try this one again, this time without the compat_ioctl changes. We've got those fixed up, but that can go out next week. This contains: - block queue flush lockdep annotation (Bart) - Type fix for bsg_queue_rq() (Bart) - Three dasd fixes (Stefan, Jan) - nbd deadlock fix (Mike) - Error handling bio user map fix (Yang) - iocost fix (Tejun) - sbitmap waitqueue addition fix that affects the kyber IO scheduler (David)" * tag 'block-5.5-20191221' of git://git.kernel.dk/linux-block: sbitmap: only queue kyber's wait callback if not already active block: fix memleak when __blk_rq_map_user_iov() is failed s390/dasd: fix typo in copyright statement s390/dasd: fix memleak in path handling error case s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly block: Fix a lockdep complaint triggered by request queue flushing block: Fix the type of 'sts' in bsg_queue_rq() block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT nbd: fix shutdown and recv work deadlock v2 iocost: over-budget forced IOs should schedule async delay
2019-12-20sbitmap: only queue kyber's wait callback if not already activeDavid Jeffery1-1/+1
Under heavy loads where the kyber I/O scheduler hits the token limits for its scheduling domains, kyber can become stuck. When active requests complete, kyber may not be woken up leaving the I/O requests in kyber stuck. This stuck state is due to a race condition with kyber and the sbitmap functions it uses to run a callback when enough requests have completed. The running of a sbt_wait callback can race with the attempt to insert the sbt_wait. Since sbitmap_del_wait_queue removes the sbt_wait from the list first then sets the sbq field to NULL, kyber can see the item as not on a list but the call to sbitmap_add_wait_queue will see sbq as non-NULL. This results in the sbt_wait being inserted onto the wait list but ws_active doesn't get incremented. So the sbitmap queue does not know there is a waiter on a wait list. Since sbitmap doesn't think there is a waiter, kyber may never be informed that there are domain tokens available and the I/O never advances. With the sbt_wait on a wait list, kyber believes it has an active waiter so cannot insert a new waiter when reaching the domain's full state. This race can be fixed by only adding the sbt_wait to the queue if the sbq field is NULL. If sbq is not NULL, there is already an action active which will trigger the re-running of kyber. Let it run and add the sbt_wait to the wait list if still needing to wait. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Reported-by: John Pittman <jpittman@redhat.com> Tested-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17lib/Kconfig.debug: fix some messed up configurationsChangbin Du1-49/+51
Some configuration items are messed up during conflict resolving. For example, STRICT_DEVMEM should not in testing menu, but kunit should. This patch fixes all of them. [akpm@linux-foundation.org: coding style fixes] Link: http://lkml.kernel.org/r/20191209155653.7509-1-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-16pipe: Fix bogus dereference in iov_iter_alignment()Jan Kara1-1/+2
We cannot look at 'i->pipe' unless we know the iter is a pipe. Move the ring_size load to a branch in iov_iter_alignment() where we've already checked the iter is a pipe to avoid bogus dereference. Reported-by: syzbot+bea68382bae9490e7dd6@syzkaller.appspotmail.com Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-12-09lib: raid6: fix awk build warningsGreg Kroah-Hartman1-1/+1
Newer versions of awk spit out these fun warnings: awk: ../lib/raid6/unroll.awk:16: warning: regexp escape sequence `\#' is not a known regexp operator As commit 700c1018b86d ("x86/insn: Fix awk regexp warnings") showed, it turns out that there are a number of awk strings that do not need to be escaped and newer versions of awk now warn about this. Fix the string up so that no warning is produced. The exact same kernel module gets created before and after this patch, showing that it wasn't needed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20191206152600.GA75093@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-07lib/: fix Kconfig indentationKrzysztof Kozlowski3-22/+22
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ / /' -i */Kconfig Link: http://lkml.kernel.org/r/20191120140140.19148-1-krzk@kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move DEBUG_FS to 'Generic Kernel Debugging Instruments'Changbin Du1-12/+12
DEBUG_FS does not belong to 'Compile-time checks and compiler options'. Link: http://lkml.kernel.org/r/20190909144453.3520-10-changbin.du@gmail.com Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move DEBUG_BUGVERBOSE to 'printk and dmesg options'Changbin Du1-9/+9
I think DEBUG_BUGVERBOSE is a dmesg option which gives more debug info to dmesg. Link: http://lkml.kernel.org/r/20190909144453.3520-9-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: create a submenu for scheduler debugging optionsChangbin Du1-0/+4
Create a submenu 'Scheduler Debugging' for scheduler debugging options. Link: http://lkml.kernel.org/r/20190909144453.3520-8-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move SCHED_STACK_END_CHECK after DEBUG_STACK_USAGEChangbin Du1-12/+12
They are both memory debug options to debug kernel stack issues. Link: http://lkml.kernel.org/r/20190909144453.3520-7-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move Oops into 'Lockups and Hangs'Changbin Du1-29/+29
They are similar options so place them together. Link: http://lkml.kernel.org/r/20190909144453.3520-6-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: move kernel testing and coverage options to same submenuChangbin Du1-84/+89
Move error injection, coverage, testing options to a new top level submenu 'Kernel Testing and Coverage'. They are all for test purpose. Link: http://lkml.kernel.org/r/20190909144453.3520-5-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: group kernel data structures debugging togetherChangbin Du1-10/+14
Group these similar runtime data structures verification options together. Link: http://lkml.kernel.org/r/20190909144453.3520-4-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: create submenu for arch special debugging optionsChangbin Du1-0/+4
The arch special options are a little long, so create a submenu for them. Link: http://lkml.kernel.org/r/20190909144453.3520-3-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-07kernel-hacking: group sysrq/kgdb/ubsan into 'Generic Kernel Debugging ↵Changbin Du1-4/+8
Instruments' Patch series "hacking: make 'kernel hacking' menu better structurized", v3. This series is a trivial improvment for the layout of 'kernel hacking' configuration menu. Now we have many items in it which makes takes a little time to look up them since they are not well structurized yet. Early discussion is here: https://lkml.org/lkml/2019/9/1/39 This patch (of 9): Group generic kernel debugging instruments sysrq/kgdb/ubsan together into a new submenu. Link: http://lkml.kernel.org/r/20190909144453.3520-2-changbin.du@gmail.com Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-7/+9
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-12-04lib/bitmap: introduce bitmap_replace() helperAndy Shevchenko2-0/+50
In some drivers we want to have a single operation over bitmap which is an equivalent to: *dst = (*old & ~(*mask)) | (*new & *mask) Introduce bitmap_replace() helper for this. Link: http://lkml.kernel.org/r/20191022172922.61232-8-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap: fix comment about this fileAndy Shevchenko1-1/+1
This test case file is about bitmap API, and not printf() facility. Link: http://lkml.kernel.org/r/20191022172922.61232-7-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap: move exp1 and exp2 upper for others to useAndy Shevchenko1-21/+20
Some test cases may re-use predefined exp1 and exp2 bitmaps. Move them upper in the file. Link: http://lkml.kernel.org/r/20191022172922.61232-6-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap: rename exp to exp1 to avoid ambiguous nameAndy Shevchenko1-22/+22
One function is using exp as local variable. Avoid ambiguous naming by rename global one to exp1. Link: http://lkml.kernel.org/r/20191022172922.61232-5-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap: name EXP_BYTES properlyAndy Shevchenko1-5/+5
EXP_BYTES has been wrongly named. It's a size of the exp array in bits. While here, go ahead and rename to EXP1_IN_BITS to avoid double renaming when exp will be renamed to exp1 in the next patch Link: http://lkml.kernel.org/r/20191022172922.61232-4-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap: undefine macros after useAndy Shevchenko1-0/+4
There is no need to keep step and ptest macros defined in entire file. Link: http://lkml.kernel.org/r/20191022172922.61232-3-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Yury Norov <yury.norov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap: force argument of bitmap_parselist_user() to proper address ↵Andy Shevchenko1-1/+1
space Patch series "gpio: pca953x: Convert to bitmap (extended) API", v2. While converting gpio-pca953x driver to bitmap API, I noticed that we have no function to replace bits. So, that's how patch 7 appears. First 6 patches are preparatory of the test suite (including some warning fixes, etc). Patches 8-9 are preparatory for the GPIO driver to be easier converted to bitmap API, conversion to which happens in patch 10. Patch 11 contains simple indentation fixes. This patch (of 11): Sparse complains: lib/test_bitmap.c:345:58: warning: incorrect type in argument 1 (different address spaces) lib/test_bitmap.c:345:58: expected char const [noderef] <asn:1> *ubuf lib/test_bitmap.c:345:58: got char const *const in Force argument of bitmap_parselist_user() to proper address space. Link: http://lkml.kernel.org/r/20191022172922.61232-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yury Norov <yury.norov@gmail.com> Cc: William Breathitt Gray <vilhelm.gray@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/ubsan: don't serialize UBSAN reportJulien Grall1-41/+23
At the moment, UBSAN report will be serialized using a spin_lock(). On RT-systems, spinlocks are turned to rt_spin_lock and may sleep. This will result to the following splat if the undefined behavior is in a context that can sleep: BUG: sleeping function called from invalid context at /src/linux/kernel/locking/rtmutex.c:968 in_atomic(): 1, irqs_disabled(): 128, pid: 3447, name: make 1 lock held by make/3447: #0: 000000009a966332 (&mm->mmap_sem){++++}, at: do_page_fault+0x140/0x4f8 irq event stamp: 6284 hardirqs last enabled at (6283): [<ffff000011326520>] _raw_spin_unlock_irqrestore+0x90/0xa0 hardirqs last disabled at (6284): [<ffff0000113262b0>] _raw_spin_lock_irqsave+0x30/0x78 softirqs last enabled at (2430): [<ffff000010088ef8>] fpsimd_restore_current_state+0x60/0xe8 softirqs last disabled at (2427): [<ffff000010088ec0>] fpsimd_restore_current_state+0x28/0xe8 Preemption disabled at: [<ffff000011324a4c>] rt_mutex_futex_unlock+0x4c/0xb0 CPU: 3 PID: 3447 Comm: make Tainted: G W 5.2.14-rt7-01890-ge6e057589653 #911 Call trace: dump_backtrace+0x0/0x148 show_stack+0x14/0x20 dump_stack+0xbc/0x104 ___might_sleep+0x154/0x210 rt_spin_lock+0x68/0xa0 ubsan_prologue+0x30/0x68 handle_overflow+0x64/0xe0 __ubsan_handle_add_overflow+0x10/0x18 __lock_acquire+0x1c28/0x2a28 lock_acquire+0xf0/0x370 _raw_spin_lock_irqsave+0x58/0x78 rt_mutex_futex_unlock+0x4c/0xb0 rt_spin_unlock+0x28/0x70 get_page_from_freelist+0x428/0x2b60 __alloc_pages_nodemask+0x174/0x1708 alloc_pages_vma+0x1ac/0x238 __handle_mm_fault+0x4ac/0x10b0 handle_mm_fault+0x1d8/0x3b0 do_page_fault+0x1c8/0x4f8 do_translation_fault+0xb8/0xe0 do_mem_abort+0x3c/0x98 el0_da+0x20/0x24 The spin_lock() will protect against multiple CPUs to output a report together, I guess to prevent them from being interleaved. However, they can still interleave with other messages (and even splat from __might_sleep). So the lock usefulness seems pretty limited. Rather than trying to accomodate RT-system by switching to a raw_spin_lock(), the lock is now completely dropped. Link: http://lkml.kernel.org/r/20190920100835.14999-1-julien.grall@arm.com Signed-off-by: Julien Grall <julien.grall@arm.com> Reported-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/genalloc.c: rename addr_in_gen_pool to gen_pool_has_addrHuang Shijie1-3/+3
Follow the kernel conventions, rename addr_in_gen_pool to gen_pool_has_addr. [sjhuang@iluvatar.ai: fix Documentation/ too] Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/genalloc.c: export symbol addr_in_gen_poolHuang Shijie1-0/+1
We use addr_in_gen_pool() in a driver module. So export it. Link: http://lkml.kernel.org/r/20181224070622.22197-2-sjhuang@iluvatar.ai Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Skidanov <alexey.skidanov@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/math/rational.c: fix possible incorrect result from rational fractions ↵Trent Piepho1-13/+50
helper In some cases the previous algorithm would not return the closest approximation. This would happen when a semi-convergent was the closest, as the previous algorithm would only consider convergents. As an example, consider an initial value of 5/4, and trying to find the closest approximation with a maximum of 4 for numerator and denominator. The previous algorithm would return 1/1 as the closest approximation, while this version will return the correct answer of 4/3. To do this, the main loop performs effectively the same operations as it did before. It must now keep track of the last three approximations, n2/d2 .. n0/d0, while before it only needed the last two. If an exact answer is not found, the algorithm will now calculate the best semi-convergent term, t, which is a single expression with two divisions: min((max_numerator - n0) / n1, (max_denominator - d0) / d1) This will be used if it is better than previous convergent. The test for this is generally a simple comparison, 2*t > a. But in an edge case, where the convergent's final term is even and the best allowable semi-convergent has a final term of exactly half the convergent's final term, the more complex comparison (d0*dp > d1*d) is used. I also wrote some comments explaining the code. While one still needs to look up the math elsewhere, they should help a lot to follow how the code relates to that math. This routine is used in two places in the video4linux code, but in those cases it is only used to reduce a fraction to lowest terms, which the existing code will do correctly. This could be done more efficiently with a different library routine but it would still be the Euclidean alogrithm at its heart. So no change. The remain users are places where a fractional PLL divider is programmed. What would happen is something asked for a clock of X MHz but instead gets Y MHz, where Y is close to X but not exactly due to the hardware limitations. After this change they might, in some cases, get Y' MHz, where Y' is a little closer to X then Y was. Users like this are: Three UARTs, in 8250_mid, 8250_lpss, and imx. One GPU in vp4_hdmi. And three clock drivers, clk-cdce706, clk-si5351, and clk-fractional-divider. The last is a generic clock driver and so would have more users referenced via device tree entries. I think there's a bug in that one, it's limiting an N bit field that is offset-by-1 to the range 0 .. (1<<N)-2, when it should be (1<<N)-1 as the upper limit. I have an IMX system, one of the UARTs using this, so I can provide a real example. If I request a custom baud rate of 1499978, the driver will program the PLL to produce a baud rate of 1500000. After this change, the fractional divider in the UART is programmed to a ratio of 65535/65536, which produces a baud rate of 1499977.0625. Closer to the requested value. Link: http://lkml.kernel.org/r/20190330205855.19396-1-tpiepho@gmail.com Signed-off-by: Trent Piepho <tpiepho@gmail.com> Cc: Oskar Schirmer <oskar@scara.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_meminit.c: add bulk alloc/free testsLaura Abbott1-1/+19
kmem_cache_alloc_bulk/kmem_cache_free_bulk are used to make multiple allocations of the same size to avoid the overhead of multiple kmalloc/kfree calls. Extend the kmem_cache tests to make some calls to these APIs. Link: http://lkml.kernel.org/r/20191107191447.23058-1-labbott@redhat.com Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Alexander Potapenko <glider@google.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Christoph Lameter <cl@linux.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Sandeep Patil <sspatil@android.com> Cc: Jann Horn <jannh@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04lib/test_bitmap.c: add for_each_set_clump8 test casesWilliam Breathitt Gray1-0/+65
The introduction of the for_each_set_clump8 macro warrants test cases to verify the implementation. This patch adds test case checks for whether an out-of-bounds clump index is returned, a zero clump is returned, or the returned clump value differs from the expected clump value. Link: http://lkml.kernel.org/r/febc0fb8151e3e3fdd61c34da9193d1c4d7e6c12.1570641097.git.vilhelm.gray@gmail.com Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Lukas Wunner <lukas@wunner.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk> Cc: Phil Reid <preid@electromag.com.au> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-04bitops: introduce the for_each_set_clump8 macroWilliam Breathitt Gray1-0/+14
Pach series "Introduce the for_each_set_clump8 macro", v18. While adding GPIO get_multiple/set_multiple callback support for various drivers, I noticed a pattern of looping manifesting that would be useful standardized as a macro. This patchset introduces the for_each_set_clump8 macro and utilizes it in several GPIO drivers. The for_each_set_clump macro8 facilitates a for-loop syntax that iterates over a memory region entire groups of set bits at a time. For example, suppose you would like to iterate over a 32-bit integer 8 bits at a time, skipping over 8-bit groups with no set bit, where XXXXXXXX represents the current 8-bit group: Example: 10111110 00000000 11111111 00110011 First loop: 10111110 00000000 11111111 XXXXXXXX Second loop: 10111110 00000000 XXXXXXXX 00110011 Third loop: XXXXXXXX 00000000 11111111 00110011 Each iteration of the loop returns the next 8-bit group that has at least one set bit. The for_each_set_clump8 macro has four parameters: * start: set to the bit offset of the current clump * clump: set to the current clump value * bits: bitmap to search within * size: bitmap size in number of bits In this version of the patchset, the for_each_set_clump macro has been reimplemented and simplified based on the suggestions provided by Rasmus Villemoes and Andy Shevchenko in the version 4 submission. In particular, the function of the for_each_set_clump macro has been restricted to handle only 8-bit clumps; the drivers that use the for_each_set_clump macro only handle 8-bit ports so a generic for_each_set_clump implementation is not necessary. Thus, a solution for large clumps (i.e. those larger than the width of a bitmap word) can be postponed until a driver appears that actually requires such a generic for_each_set_clump implementation. For what it's worth, a semi-generic for_each_set_clump (i.e. for clumps smaller than the width of a bitmap word) can be implemented by simply replacing the hardcoded '8' and '0xFF' instances with respective variables. I have not yet had a need for such an implementation, and since it falls short of a true generic for_each_set_clump function, I have decided to forgo such an implementation for now. In addition, the bitmap_get_value8 and bitmap_set_value8 functions are introduced to get and set 8-bit values respectively. Their use is based on the behavior suggested in the patchset version 4 review. This patch (of 14): This macro iterates for each 8-bit group of bits (clump) with set bits, within a bitmap memory region. For each iteration, "start" is set to the bit offset of the found clump, while the respective clump value is stored to the location pointed by "clump". Additionally, the bitmap_get_value8 and bitmap_set_value8 functions are introduced to respectively get and set an 8-bit value in a bitmap memory region. [gustavo@embeddedor.com: fix potential sign-extension overflow] Link: http://lkml.kernel.org/r/20191015184657.GA26541@embeddedor [akpm@linux-foundation.org: s/ULL/UL/, per Joe] [vilhelm.gray@gmail.com: add for_each_set_clump8 documentation] Link: http://lkml.kernel.org/r/20191016161825.301082-1-vilhelm.gray@gmail.com Link: http://lkml.kernel.org/r/893c3b4f03266c9496137cc98ac2b1bd27f92c73.1570641097.git.vilhelm.gray@gmail.com Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Suggested-by: Lukas Wunner <lukas@wunner.de> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Phil Reid <preid@electromag.com.au> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Mathias Duckeck <m.duckeck@kunbus.de> Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-12-02Merge tag 'kbuild-v5.5' of ↵Linus Torvalds1-11/+0
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-12-02Merge tag 'docs-5.5a' of git://git.lwn.net/linuxLinus Torvalds1-1/+1
Pull Documentation updates from Jonathan Corbet: "Here are the main documentation changes for 5.5: - Various kerneldoc script enhancements. - More RST conversions; those are slowing down as we run out of things to convert, but we're a ways from done still. - Dan's "maintainer profile entry" work landed at last. Now we just need to get maintainers to fill in the profiles... - A reworking of the parallel build setup to work better with a variety of systems (and to not take over huge systems entirely in particular). - The MAINTAINERS file is now converted to RST during the build. Hopefully nobody ever tries to print this thing, or they will need to load a lot of paper. - A script and documentation making it easy for maintainers to add Link: tags at commit time. Also included is the removal of a bunch of spurious CR characters" * tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits) docs: remove a bunch of stray CRs docs: fix up the maintainer profile document libnvdimm, MAINTAINERS: Maintainer Entry Profile Maintainer Handbook: Maintainer Entry Profile MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile docs, parallelism: Rearrange how jobserver reservations are made docs, parallelism: Do not leak blocking mode to other readers docs, parallelism: Fix failure path and add comment Documentation: Remove bootmem_debug from kernel-parameters.txt Documentation: security: core.rst: fix warnings Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning Documentation/translation: Use Korean for Korean translation title docs/memory-barriers.txt: Remove remaining references to mmiowb() docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section Documentation/kokr: Kill all references to mmiowb() docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section docs: Add initial documentation for devfreq Documentation: Document how to get links with git am docs: Add request_irq() documentation ...
2019-12-01Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-11/+71
Merge updates from Andrew Morton: "Incoming: - a small number of updates to scripts/, ocfs2 and fs/buffer.c - most of MM I still have quite a lot of material (mostly not MM) staged after linux-next due to -next dependencies. I'll send those across next week as the preprequisites get merged up" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm/page_io.c: annotate refault stalls from swap_readpage mm/Kconfig: fix trivial help text punctuation mm/Kconfig: fix indentation mm/memory_hotplug.c: remove __online_page_set_limits() mm: fix typos in comments when calling __SetPageUptodate() mm: fix struct member name in function comments mm/shmem.c: cast the type of unmap_start to u64 mm: shmem: use proper gfp flags for shmem_writepage() mm/shmem.c: make array 'values' static const, makes object smaller userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK fs/userfaultfd.c: wp: clear VM_UFFD_MISSING or VM_UFFD_WP during userfaultfd_register() userfaultfd: wrap the common dst_vma check into an inlined function userfaultfd: remove unnecessary WARN_ON() in __mcopy_atomic_hugetlb() userfaultfd: use vma_pagesize for all huge page size calculation mm/madvise.c: use PAGE_ALIGN[ED] for range checking mm/madvise.c: replace with page_size() in madvise_inject_error() mm/mmap.c: make vma_merge() comment more easy to understand mm/hwpoison-inject: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fops autonuma: reduce cache footprint when scanning page tables autonuma: fix watermark checking in migrate_balanced_pgdat() ...
2019-12-01Merge tag 'mfd-next-5.5' of ↵Linus Torvalds1-0/+19
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for a "resource managed strongly uncachable ioremap" call - Provide a collection of MFD helper macros - Remove mfd_clone_cell() from MFD core - Add NULL de-reference protection in MFD core - Remove superfluous function fd_platform_add_cell() from MFD core - Honour Device Tree's request to disable a device New Drivers: - Add support for MediaTek MT6323 PMIC New Device Support: - Add support for Gemini Lake to Intel LPSS PCI - Add support for Cherry Trail Crystal Cover PMIC to Intel SoC PMIC CRC - Add support for PM{I}8950 to Qualcomm SPMI PMIC - Add support for U8420 to ST-Ericsson DB8500 - Add support for Comet Lake PCH-H to Intel LPSS PCI New Functionality: - Add support for requested supply clocks; madera-core Fix-ups: - Lower interrupt priority; rk808 - Use provided helpers (macros, group functions, defines); rk808, ipaq-micro, ab8500-core, db8500-prcmu, mt6397-core, cs5535-mfd - Only allocate IRQs on request; max77620 - Use simplified API; arizona-core - Remove redundant and/or duplicated code; wm8998-tables, arizona, syscon - Device Tree binding fix-ups; madera, max77650, max77693 - Remove mfd_cell->id abuse hack; cs5535-mfd - Remove only user of mfd_clone_cell(); cs5535-mfd - Make resources static; rohm-bd70528 Bug Fixes: - Fix product ID for RK818; rk808 - Fix Power Key; rk808 - Fix booting on the BananaPi; mt6397-core - Endian fix-ups; twl.h - Fix static error checker warnings; ti_am335x_tscadc" * tag 'mfd-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (47 commits) Revert "mfd: syscon: Set name of regmap_config" mfd: ti_am335x_tscadc: Fix static checker warning mfd: bd70528: Staticize bit value definitions mfd: mfd-core: Honour Device Tree's request to disable a child-device dt-bindings: mfd: max77693: Fix missing curly brace mfd: intel-lpss: Add Intel Comet Lake PCH-H PCI IDs mfd: db8500-prcmu: Support U8420-sysclk firmware dt-bindings: mfd: max77650: Convert the binding document to yaml mfd: mfd-core: Move pdev->mfd_cell creation back into mfd_add_device() mfd: mfd-core: Remove usage counting for .{en,dis}able() call-backs x86: olpc-xo1-sci: Remove invocation of MFD's .enable()/.disable() call-backs x86: olpc-xo1-pm: Remove invocation of MFD's .enable()/.disable() call-backs mfd: mfd-core: Remove mfd_clone_cell() mfd: mfd-core: Protect against NULL call-back function pointer mfd: cs5535-mfd: Register clients using their own dedicated MFD cell entries mfd: cs5535-mfd: Request shared IO regions centrally mfd: cs5535-mfd: Remove mfd_cell->id hack mfd: cs5535-mfd: Use PLATFORM_DEVID_* defines and tidy error message mfd: intel_soc_pmic_crc: Add "cht_crystal_cove_pmic" cell to CHT cells mfd: madera: Add support for requesting the supply clocks ...
2019-12-01Merge tag 'y2038-cleanups-5.5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 cleanups from Arnd Bergmann: "y2038 syscall implementation cleanups This is a series of cleanups for the y2038 work, mostly intended for namespace cleaning: the kernel defines the traditional time_t, timeval and timespec types that often lead to y2038-unsafe code. Even though the unsafe usage is mostly gone from the kernel, having the types and associated functions around means that we can still grow new users, and that we may be missing conversions to safe types that actually matter. There are still a number of driver specific patches needed to get the last users of these types removed, those have been submitted to the respective maintainers" Link: https://lore.kernel.org/lkml/20191108210236.1296047-1-arnd@arndb.de/ * tag 'y2038-cleanups-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (26 commits) y2038: alarm: fix half-second cut-off y2038: ipc: fix x32 ABI breakage y2038: fix typo in powerpc vdso "LOPART" y2038: allow disabling time32 system calls y2038: itimer: change implementation to timespec64 y2038: move itimer reset into itimer.c y2038: use compat_{get,set}_itimer on alpha y2038: itimer: compat handling to itimer.c y2038: time: avoid timespec usage in settimeofday() y2038: timerfd: Use timespec64 internally y2038: elfcore: Use __kernel_old_timeval for process times y2038: make ns_to_compat_timeval use __kernel_old_timeval y2038: socket: use __kernel_old_timespec instead of timespec y2038: socket: remove timespec reference in timestamping y2038: syscalls: change remaining timeval to __kernel_old_timeval y2038: rusage: use __kernel_old_timeval y2038: uapi: change __kernel_time_t to __kernel_old_time_t y2038: stat: avoid 'time_t' in 'struct stat' y2038: ipc: remove __kernel_time_t reference from headers y2038: vdso: powerpc: avoid timespec references ...
2019-12-01Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-12-01kasan: add test for vmallocDaniel Axtens1-0/+26
Test kasan vmalloc support by adding a new test to the module. Link: http://lkml.kernel.org/r/20191031093909.9228-3-dja@axtens.net Signed-off-by: Daniel Axtens <dja@axtens.net> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01kasan: support backing vmalloc space with real shadow memoryDaniel Axtens1-0/+16
Patch series "kasan: support backing vmalloc space with real shadow memory", v11. Currently, vmalloc space is backed by the early shadow page. This means that kasan is incompatible with VMAP_STACK. This series provides a mechanism to back vmalloc space with real, dynamically allocated memory. I have only wired up x86, because that's the only currently supported arch I can work with easily, but it's very easy to wire up other architectures, and it appears that there is some work-in-progress code to do this on arm64 and s390. This has been discussed before in the context of VMAP_STACK: - https://bugzilla.kernel.org/show_bug.cgi?id=202009 - https://lkml.org/lkml/2018/7/22/198 - https://lkml.org/lkml/2019/7/19/822 In terms of implementation details: Most mappings in vmalloc space are small, requiring less than a full page of shadow space. Allocating a full shadow page per mapping would therefore be wasteful. Furthermore, to ensure that different mappings use different shadow pages, mappings would have to be aligned to KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE. Instead, share backing space across multiple mappings. Allocate a backing page when a mapping in vmalloc space uses a particular page of the shadow region. This page can be shared by other vmalloc mappings later on. We hook in to the vmap infrastructure to lazily clean up unused shadow memory. Testing with test_vmalloc.sh on an x86 VM with 2 vCPUs shows that: - Turning on KASAN, inline instrumentation, without vmalloc, introuduces a 4.1x-4.2x slowdown in vmalloc operations. - Turning this on introduces the following slowdowns over KASAN: * ~1.76x slower single-threaded (test_vmalloc.sh performance) * ~2.18x slower when both cpus are performing operations simultaneously (test_vmalloc.sh sequential_test_order=1) This is unfortunate but given that this is a debug feature only, not the end of the world. The benchmarks are also a stress-test for the vmalloc subsystem: they're not indicative of an overall 2x slowdown! This patch (of 4): Hook into vmalloc and vmap, and dynamically allocate real shadow memory to back the mappings. Most mappings in vmalloc space are small, requiring less than a full page of shadow space. Allocating a full shadow page per mapping would therefore be wasteful. Furthermore, to ensure that different mappings use different shadow pages, mappings would have to be aligned to KASAN_SHADOW_SCALE_SIZE * PAGE_SIZE. Instead, share backing space across multiple mappings. Allocate a backing page when a mapping in vmalloc space uses a particular page of the shadow region. This page can be shared by other vmalloc mappings later on. We hook in to the vmap infrastructure to lazily clean up unused shadow memory. To avoid the difficulties around swapping mappings around, this code expects that the part of the shadow region that covers the vmalloc space will not be covered by the early shadow page, but will be left unmapped. This will require changes in arch-specific code. This allows KASAN with VMAP_STACK, and may be helpful for architectures that do not have a separate module space (e.g. powerpc64, which I am currently working on). It also allows relaxing the module alignment back to PAGE_SIZE. Testing with test_vmalloc.sh on an x86 VM with 2 vCPUs shows that: - Turning on KASAN, inline instrumentation, without vmalloc, introuduces a 4.1x-4.2x slowdown in vmalloc operations. - Turning this on introduces the following slowdowns over KASAN: * ~1.76x slower single-threaded (test_vmalloc.sh performance) * ~2.18x slower when both cpus are performing operations simultaneously (test_vmalloc.sh sequential_test_order=3D1) This is unfortunate but given that this is a debug feature only, not the end of the world. The full benchmark results are: Performance No KASAN KASAN original x baseline KASAN vmalloc x baseline x KASAN fix_size_alloc_test 662004 11404956 17.23 19144610 28.92 1.68 full_fit_alloc_test 710950 12029752 16.92 13184651 18.55 1.10 long_busy_list_alloc_test 9431875 43990172 4.66 82970178 8.80 1.89 random_size_alloc_test 5033626 23061762 4.58 47158834 9.37 2.04 fix_align_alloc_test 1252514 15276910 12.20 31266116 24.96 2.05 random_size_align_alloc_te 1648501 14578321 8.84 25560052 15.51 1.75 align_shift_alloc_test 147 830 5.65 5692 38.72 6.86 pcpu_alloc_test 80732 125520 1.55 140864 1.74 1.12 Total Cycles 119240774314 763211341128 6.40 1390338696894 11.66 1.82 Sequential, 2 cpus No KASAN KASAN original x baseline KASAN vmalloc x baseline x KASAN fix_size_alloc_test 1423150 14276550 10.03 27733022 19.49 1.94 full_fit_alloc_test 1754219 14722640 8.39 15030786 8.57 1.02 long_busy_list_alloc_test 11451858 52154973 4.55 107016027 9.34 2.05 random_size_alloc_test 5989020 26735276 4.46 68885923 11.50 2.58 fix_align_alloc_test 2050976 20166900 9.83 50491675 24.62 2.50 random_size_align_alloc_te 2858229 17971700 6.29 38730225 13.55 2.16 align_shift_alloc_test 405 6428 15.87 26253 64.82 4.08 pcpu_alloc_test 127183 151464 1.19 216263 1.70 1.43 Total Cycles 54181269392 308723699764 5.70 650772566394 12.01 2.11 fix_size_alloc_test 1420404 14289308 10.06 27790035 19.56 1.94 full_fit_alloc_test 1736145 14806234 8.53 15274301 8.80 1.03 long_busy_list_alloc_test 11404638 52270785 4.58 107550254 9.43 2.06 random_size_alloc_test 6017006 26650625 4.43 68696127 11.42 2.58 fix_align_alloc_test 2045504 20280985 9.91 50414862 24.65 2.49 random_size_align_alloc_te 2845338 17931018 6.30 38510276 13.53 2.15 align_shift_alloc_test 472 3760 7.97 9656 20.46 2.57 pcpu_alloc_test 118643 132732 1.12 146504 1.23 1.10 Total Cycles 54040011688 309102805492 5.72 651325675652 12.05 2.11 [dja@axtens.net: fixups] Link: http://lkml.kernel.org/r/20191120052719.7201-1-dja@axtens.net Link: https://bugzilla.kernel.org/show_bug.cgi?id=3D202009 Link: http://lkml.kernel.org/r/20191031093909.9228-2-dja@axtens.net Signed-off-by: Mark Rutland <mark.rutland@arm.com> [shadow rework] Signed-off-by: Daniel Axtens <dja@axtens.net> Co-developed-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-01rss_stat: add support to detect RSS updates of external mmJoel Fernandes (Google)1-11/+29
When a process updates the RSS of a different process, the rss_stat tracepoint appears in the context of the process doing the update. This can confuse userspace that the RSS of process doing the update is updated, while in reality a different process's RSS was updated. This issue happens in reclaim paths such as with direct reclaim or background reclaim. This patch adds more information to the tracepoint about whether the mm being updated belongs to the current process's context (curr field). We also include a hash of the mm pointer so that the process who the mm belongs to can be uniquely identified (mm_id field). Also vsprintf.c is refactored a bit to allow reuse of hashing code. [akpm@linux-foundation.org: remove unused local `str'] [joelaf@google.com: inline call to ptr_to_hashval] Link: http://lore.kernel.org/r/20191113153816.14b95acd@gandalf.local.home Link: http://lkml.kernel.org/r/20191114164622.GC233237@google.com Link: http://lkml.kernel.org/r/20191106024452.81923-1-joel@joelfernandes.org Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Reported-by: Ioannis Ilkos <ilkos@google.com> Acked-by: Petr Mladek <pmladek@suse.com> [lib/vsprintf.c] Cc: Tim Murray <timmurray@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Carmen Jackson <carmenjackson@google.com> Cc: Mayank Gupta <mayankgupta@google.com> Cc: Daniel Colascione <dancol@google.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-30Merge tag 'hyperv-next-signed' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Sasha Levin: - support for new VMBus protocols (Andrea Parri) - hibernation support (Dexuan Cui) - latency testing framework (Branden Bonaby) - decoupling Hyper-V page size from guest page size (Himadri Pandya) * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits) Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic drivers/hv: Replace binary semaphore with mutex drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86 HID: hyperv: Add the support of hibernation hv_balloon: Add the support of hibernation x86/hyperv: Implement hv_is_hibernation_supported() Drivers: hv: balloon: Remove dependencies on guest page size Drivers: hv: vmbus: Remove dependencies on guest page size x86: hv: Add function to allocate zeroed page for Hyper-V Drivers: hv: util: Specify ring buffer size using Hyper-V page size Drivers: hv: Specify receive buffer size using Hyper-V page size tools: hv: add vmbus testing tool drivers: hv: vmbus: Introduce latency testing video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host hv_netvsc: Add the support of hibernation hv_sock: Add the support of hibernation video: hyperv_fb: Add the support of hibernation scsi: storvsc: Add the support of hibernation Drivers: hv: vmbus: Add module parameter to cap the VMBus version ...
2019-11-30Merge tag 'notifications-pipe-prep-20191115' of ↵Linus Torvalds1-118/+151
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull pipe rework from David Howells: "This is my set of preparatory patches for building a general notification queue on top of pipes. It makes a number of significant changes: - It removes the nr_exclusive argument from __wake_up_sync_key() as this is always 1. This prepares for the next step: - Adds wake_up_interruptible_sync_poll_locked() so that poll can be woken up from a function that's holding the poll waitqueue spinlock. - Change the pipe buffer ring to be managed in terms of unbounded head and tail indices rather than bounded index and length. This means that reading the pipe only needs to modify one index, not two. - A selection of helper functions are provided to query the state of the pipe buffer, plus a couple to apply updates to the pipe indices. - The pipe ring is allowed to have kernel-reserved slots. This allows many notification messages to be spliced in by the kernel without allowing userspace to pin too many pages if it writes to the same pipe. - Advance the head and tail indices inside the pipe waitqueue lock and use wake_up_interruptible_sync_poll_locked() to poke poll without having to take the lock twice. - Rearrange pipe_write() to preallocate the buffer it is going to write into and then drop the spinlock. This allows kernel notifications to then be added the ring whilst it is filling the buffer it allocated. The read side is stalled because the pipe mutex is still held. - Don't wake up readers on a pipe if there was already data in it when we added more. - Don't wake up writers on a pipe if the ring wasn't full before we removed a buffer" * tag 'notifications-pipe-prep-20191115' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: pipe: Remove sync on wake_ups pipe: Increase the writer-wakeup threshold to reduce context-switch count pipe: Check for ring full inside of the spinlock in pipe_write() pipe: Remove redundant wakeup from pipe_write() pipe: Rearrange sequence in pipe_write() to preallocate slot pipe: Conditionalise wakeup in pipe_read() pipe: Advance tail pointer inside of wait spinlock in pipe_read() pipe: Allow pipes to have kernel-reserved slots pipe: Use head and tail pointers for the ring, not cursor and length Add wake_up_interruptible_sync_poll_locked() Remove the nr_exclusive argument from __wake_up_sync_key() pipe: Reduce #inclusion of pipe_fs_i.h
2019-11-28Merge tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremapLinus Torvalds2-0/+42
Pull generic ioremap support from Christoph Hellwig: "This adds the remaining bits for an entirely generic ioremap and iounmap to lib/ioremap.c. To facilitate that, it cleans up the giant mess of weird ioremap variants we had with no users outside the arch code. For now just the three newest ports use the code, but there is more than a handful others that can be converted without too much work. Summary: - clean up various obsolete ioremap and iounmap variants - add a new generic ioremap implementation and switch csky, nds32 and riscv over to it" * tag 'ioremap-5.5' of git://git.infradead.org/users/hch/ioremap: (21 commits) nds32: use generic ioremap csky: use generic ioremap csky: remove ioremap_cache riscv: use the generic ioremap code lib: provide a simple generic ioremap implementation sh: remove __iounmap nios2: remove __iounmap hexagon: remove __iounmap m68k: rename __iounmap and mark it static arch: rely on asm-generic/io.h for default ioremap_* definitions asm-generic: don't provide ioremap for CONFIG_MMU asm-generic: ioremap_uc should behave the same with and without MMU xtensa: clean up ioremap x86: Clean up ioremap() parisc: remove __ioremap nios2: remove __ioremap alpha: remove the unused __ioremap wrapper hexagon: clean up ioremap ia64: rename ioremap_nocache to ioremap_uc unicore32: remove ioremap_cached ...