summaryrefslogtreecommitdiffstats
path: root/lib
AgeCommit message (Collapse)AuthorFilesLines
2015-01-09Merge tag 'for_linus-3.19-rc4' of ↵Linus Torvalds1-0/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kgdb/kdb fixes from Jason Wessel: "These have been around since 3.17 and in kgdb-next for the last 9 weeks and some will go back to -stable. Summary of changes: Cleanups - kdb: Remove unused command flags, repeat flags and KDB_REPEAT_NONE Fixes - kgdb/kdb: Allow access on a single core, if a CPU round up is deemed impossible, which will allow inspection of the now "trashed" kernel - kdb: Add enable mask for the command groups - kdb: access controls to restrict sensitive commands" * tag 'for_linus-3.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kernel/debug/debug_core.c: Logging clean-up kgdb: timeout if secondary CPUs ignore the roundup kdb: Allow access to sensitive commands to be restricted by default kdb: Add enable mask for groups of commands kdb: Categorize kdb commands (similar to SysRq categorization) kdb: Remove KDB_REPEAT_NONE flag kdb: Use KDB_REPEAT_* values as flags kdb: Rename kdb_register_repeat() to kdb_register_flags() kdb: Rename kdb_repeat_t to kdb_cmdflags_t, cmd_repeat to cmd_flags kdb: Remove currently unused kdbtab_t->cmd_flags
2015-01-07assoc_array: Include rcupdate.h for call_rcu() definitionPranith Kumar1-0/+1
Include rcupdate.h header to provide call_rcu() definition. This was implicitly being provided by slab.h file which include srcu.h somewhere in its include hierarchy which in-turn included rcupdate.h. Lately, tinification effort added support to remove srcu entirely because of which we are encountering build errors like lib/assoc_array.c: In function 'assoc_array_apply_edit': lib/assoc_array.c:1426:2: error: implicit declaration of function 'call_rcu' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors Fix these by including rcupdate.h explicitly. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reported-by: Scott Wood <scottwood@freescale.com>
2014-12-18Merge tag 'modules-next-for-linus' of ↵Linus Torvalds1-6/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The exciting thing here is the getting rid of stop_machine on module removal. This is possible by using a simple atomic_t for the counter, rather than our fancy per-cpu counter: it turns out that no one is doing a module increment per net packet, so the slowdown should be in the noise" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: param: do not set store func without write perm params: cleanup sysfs allocation kernel:module Fix coding style errors and warnings. module: Remove stop_machine from module unloading module: Replace module_ref with atomic_t refcnt lib/bug: Use RCU list ops for module_bug_list module: Unlink module with RCU synchronizing instead of stop_machine module: Wait for RCU synchronizing before releasing a module
2014-12-18lib/show_mem.c: add cma reserved informationVishnu Pratap Singh1-0/+6
Add cma reserved information which is currently shown as a part of total reserved only. This patch is continuation of our previous cma patches related to this. https://lkml.org/lkml/2014/10/20/64 https://lkml.org/lkml/2014/10/22/383 [akpm@linux-foundation.org: remove hopefully-unneeded ifdefs] Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-14Merge tag 'char-misc-3.19-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ...
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds2-1/+30
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-13lib/decompress.c: consistency of compress formats for kernel imageHaesung Kim1-2/+2
Magic number of compress formats for kernel image is defined by two bytes. These numbers are written in hexadecimal number, nevertheless magic number for only gunzip is written in octal number. The formats should be consistent for readability. Therefore, magic numbers for gunzip are also defined by hexadecimal number. Signed-off-by: Haesung Kim <matia.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13decompress_bunzip2: off by one in get_next_block()Dan Carpenter1-1/+1
"origPtr" is used as an offset into the bd->dbuf[] array. That array is allocated in start_bunzip() and has "bd->dbufSize" number of elements so the test here should be >= instead of >. Later we check "origPtr" again before using it as an offset so I don't know if this bug can be triggered in real life. Fixes: bc22c17e12c1 ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alain Knaff <alain@knaff.lu> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13fault-inject: add ratelimit optionDmitry Monakhov1-4/+17
Current debug levels are not optimal. Especially if one want to provoke big numbers of faults(broken device simulator) then any verbose level will produce giant numbers of identical logging messages. Let's add ratelimit parameter for that purpose. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Acked-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13syscalls: implement execveat() system callDavid Drysdale1-0/+3
This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/page_owner: keep track of page ownersJoonsoo Kim1-0/+16
This is the page owner tracking code which is introduced so far ago. It is resident on Andrew's tree, though, nobody tried to upstream so it remain as is. Our company uses this feature actively to debug memory leak or to find a memory hogger so I decide to upstream this feature. This functionality help us to know who allocates the page. When allocating a page, we store some information about allocation in extra memory. Later, if we need to know status of all pages, we can get and analyze it from this stored information. In previous version of this feature, extra memory is statically defined in struct page, but, in this version, extra memory is allocated outside of struct page. It enables us to turn on/off this feature at boottime without considerable memory waste. Although we already have tracepoint for tracing page allocation/free, using it to analyze page owner is rather complex. We need to enlarge the trace buffer for preventing overlapping until userspace program launched. And, launched program continually dump out the trace buffer for later analysis and it would change system behaviour with more possibility rather than just keeping it in memory, so bad for debug. Moreover, we can use page_owner feature further for various purposes. For example, we can use it for fragmentation statistics implemented in this patch. And, I also plan to implement some CMA failure debugging feature using this interface. I'd like to give the credit for all developers contributed this feature, but, it's not easy because I don't know exact history. Sorry about that. Below is people who has "Signed-off-by" in the patches in Andrew's tree. Contributor: Alexander Nyberg <alexn@dsv.su.se> Mel Gorman <mgorman@suse.de> Dave Hansen <dave@linux.vnet.ibm.com> Minchan Kim <minchan@kernel.org> Michal Nazarewicz <mina86@mina86.com> Andrew Morton <akpm@linux-foundation.org> Jungsoo Son <jungsoo.son@lge.com> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13lib: bitmap: add alignment offset for bitmap_find_next_zero_area()Michal Nazarewicz1-11/+13
Add a bitmap_find_next_zero_area_off() function which works like bitmap_find_next_zero_area() function except it allows an offset to be specified when alignment is checked. This lets caller request a bit such that its number plus the offset is aligned according to the mask. [gregory.0xf0@gmail.com: Retrieved from https://patchwork.linuxtv.org/patch/6254/ and updated documentation] Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds5-104/+103
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
2014-12-10Merge tag 'trace-seq-buf-3.19' of ↵Linus Torvalds2-1/+360
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq
2014-12-10lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not nRasmus Villemoes1-4/+2
Return the mathematically correct answer when an argument is 0. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10lib/lcm.c: ensure correct result whenever it fitsRasmus Villemoes1-1/+1
Ensure that lcm(a,b) returns the mathematically correct result, provided it fits in an unsigned long. The current version returns garbage if a*b overflows, even if the final result would fit. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10printk: add and use LOGLEVEL_<level> defines for KERN_<LEVEL> equivalentsJoe Perches1-2/+2
Use #defines instead of magic values. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10dma-debug: prevent early callers from crashingFlorian Fainelli1-2/+10
dma_debug_init() is called by architecture specific code at different levels, but typically as a fs_initcall due to the debugfs initialization. Some platforms may have early callers of the DMA-API, running prior to the fs_initcall() level, which is not much of an issue unless CONFIG_DMA_API_DEBUG is set. When the DMA-API debugging facilities are turned on a caller will go through: debug_dma_map_{single,page} -> dma_mapping_error (inline function usually) -> debug_dma_mapping_error -> get_hash_bucket Calling get_hash_bucket() returns a valid hash value since we hash on high bits of the dma_addr cookie, but we will grab an unitialized spinlock, which typically won't crash but produce a warning, the real crash will however happen during the bucket list traversal because the list has not been initialized yet. An obvious solution is of course to move some of the offenders to run after the fs_initcall level, but since this might not always be an option, we add a flag "dma_debug_initialized" which is set to false by default, and set to true once dma_debug_init() has had a chance to run. The dma_debug_disabled() helper function previously introduced just needs to check for dma_debug_initialized to allow the caller to proceed or not. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10dma-debug: introduce dma_debug_disabledFlorian Fainelli1-16/+21
Add a helper function which returns whether the DMA debugging API is disabled, right now we only check for global_disable, but in order to accommodate early callers of the DMA-API, we will check for more initialization flags in the next patch. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+2
Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net, lib: kill arch_fast_hash library bitsDaniel Borkmann2-40/+1
As there are now no remaining users of arch_fast_hash(), lets kill it entirely. This basically reverts commit 71ae8aac3e19 ("lib: introduce arch optimized hash library") and follow-up work, that is f.e., commit 237217546d44 ("lib: hash: follow-up fixups for arch hash"), commit e3fec2f74f7f ("lib: Add missing arch generic-y entries for asm-generic/hash.h") and last but not least commit 6a02652df511 ("perf tools: Fix include for non x86 architectures"). Cc: Francesco Fusco <fusco@ntop.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10net: replace remaining users of arch_fast_hash with jhashDaniel Borkmann1-4/+4
This patch effectively reverts commit 500f80872645 ("net: ovs: use CRC32 accelerated flow hash if available"), and other remaining arch_fast_hash() users such as from nfsd via commit 6282cd565553 ("NFSD: Don't hand out delegations for 30 seconds after recalling them.") where it has been used as a hash function for bloom filtering. While we think that these users are actually not much of concern, it has been requested to remove the arch_fast_hash() library bits that arose from [1] entirely as per recent discussion [2]. The main argument is that using it as a hash may introduce bias due to its linearity (see avalanche criterion) and thus makes it less clear (though we tried to document that) when this security/performance trade-off is actually acceptable for a general purpose library function. Lets therefore avoid any further confusion on this matter and remove it to prevent any future accidental misuse of it. For the time being, this is going to make hashing of flow keys a bit more expensive in the ovs case, but future work could reevaluate a different hashing discipline. [1] https://patchwork.ozlabs.org/patch/299369/ [2] https://patchwork.ozlabs.org/patch/418756/ Cc: Neil Brown <neilb@suse.de> Cc: Francesco Fusco <fusco@ntop.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds1-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "These are the main changes in this cycle: - Streamline RCU's use of per-CPU variables, shifting from "cpu" arguments to functions to "this_"-style per-CPU variable accessors. - signal-handling RCU updates. - real-time updates. - torture-test updates. - miscellaneous fixes. - documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) rcu: Fix FIXME in rcu_tasks_kthread() rcu: More info about potential deadlocks with rcu_read_unlock() rcu: Optimize cond_resched_rcu_qs() rcu: Add sparse check for RCU_INIT_POINTER() documentation: memory-barriers.txt: Correct example for reorderings documentation: Add atomic_long_t to atomic_ops.txt documentation: Additional restriction for control dependencies documentation: Document RCU self test boot params rcutorture: Fix rcu_torture_cbflood() memory leak rcutorture: Remove obsolete kversion param in kvm.sh rcutorture: Remove stale test configurations rcutorture: Enable RCU self test in configs rcutorture: Add early boot self tests torture: Run Linux-kernel binary out of results directory cpu: Avoid puts_pending overflow rcu: Remove "cpu" argument to rcu_cleanup_after_idle() rcu: Remove "cpu" argument to rcu_prepare_for_idle() rcu: Remove "cpu" argument to rcu_needs_cpu() rcu: Remove "cpu" argument to rcu_note_context_switch() rcu: Remove "cpu" argument to rcu_preempt_check_callbacks() ...
2014-12-09bury memcpy_toiovec()Al Viro1-25/+0
no users left Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-12-08test: bpf: expand DIV_KX to DIV_MOD_KXDenis Kirjanov1-2/+8
Expand DIV_KX to use BPF_MOD operation in the DIV_KX bpf 'classic' test. CC: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-03lib/genalloc.c: export devm_gen_pool_create() for modulesMichal Simek1-0/+1
Modules can use this function for creating pool. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-02mm: do not overwrite reserved pages counter at show_mem()Rafael Aquini1-1/+1
Minor fixlet to perform the reserved pages counter aggregation for each node, at show_mem() Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-11-24rhashtable: Check for count mismatch while iterating in selftestThomas Graf1-7/+20
Verify whether both the lock and RCU protected iterators see all test entries before and after expanding and shrinking has been performed. Also verify whether the number of entries in the hashtable remains stable during expansion and shrinking. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/ieee802154/fakehard.c A bug fix went into 'net' for ieee802154/fakehard.c, which is removed in 'net-next'. Add build fix into the merge from Stephen Rothwell in openvswitch, the logging macros take a new initial 'log' argument, a new call was added in 'net' so when we merge that in here we have to explicitly add the new 'log' arg to it else the build fails. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-20Merge branch 'rcu/next' of ↵Ingo Molnar1-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: - Streamline RCU's use of per-CPU variables, shifting from "cpu" arguments to functions to "this_"-style per-CPU variable accessors. - Signal-handling RCU updates. - Real-time updates. - Torture-test updates. - Miscellaneous fixes. - Documentation updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-19seq_buf: Move the seq_buf code to lib/Steven Rostedt (Red Hat)2-1/+360
The seq_buf functions are rather useful outside of tracing. Instead of having it be dependent on CONFIG_TRACING, move the code into lib/ and allow other users to have access to it even when tracing is not configured. The seq_buf utility is similar to the seq_file utility, but instead of writing sending data back up to userland, it writes it into a buffer defined at seq_buf_init(). This allows us to send a descriptor around that writes printf() formatted strings into it that can be retrieved later. It is currently used by the tracing facility for such things like trace events to convert its binary saved data in the ring buffer into an ASCII human readable context to be displayed in /sys/kernel/debug/trace. It can also be used for doing NMI prints safely from NMI context into the seq_buf and retrieved later and dumped to printk() safely. Doing printk() from an NMI context is dangerous because an NMI can preempt a current printk() and deadlock on it. Link: http://lkml.kernel.org/p/20140619213952.058255809@goodmis.org Tested-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-16reciprocal_div: objects with exported symbols should be obj-y rather than lib-yHannes Frederic Sowa1-2/+2
Otherwise the exported symbols might be discarded because of no users in vmlinux. Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14Revert "fast_hash: avoid indirect function calls"Jay Vosburgh2-1/+40
This reverts commit e5a2c899957659cd1a9f789bc462f9c0b35f5150. Commit e5a2c899 introduced an alternative_call, arch_fast_hash2, that selects between __jhash2 and __intel_crc4_2_hash based on the X86_FEATURE_XMM4_2. Unfortunately, the alternative_call system does not appear to be suitable for use with C functions, as register usage is not handled properly for the called functions. The __jhash2 function in particular clobbers registers that are not preserved when called via alternative_call, resulting in a panic for direct callers of arch_fast_hash2 on older CPUs lacking sse4_2. It is possible that __intel_crc4_2_hash works merely by chance because it uses fewer registers. This commit was suggested as the source of the problem by Jesse Gross <jesse@nicira.com>. Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+5
Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13rhashtable: Drop gfp_flags arg in insert/remove functionsThomas Graf1-24/+17
Reallocation is only required for shrinking and expanding and both rely on a mutex for synchronization and callers of rhashtable_init() are in non atomic context. Therefore, no reason to continue passing allocation hints through the API. Instead, use GFP_KERNEL and add __GFP_NOWARN | __GFP_NORETRY to allow for silent fall back to vzalloc() without the OOM killer jumping in as pointed out by Eric Dumazet and Eric W. Biederman. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13rhashtable: Add parent argument to mutex_is_heldHerbert Xu1-2/+2
Currently mutex_is_held can only test locks in the that are global since it takes no arguments. This prevents rhashtable from being used in places where locks are lock, e.g., per-namespace locks. This patch adds a parent field to mutex_is_held and rhashtable_params so that local locks can be used (and tested). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13rhashtable: Move mutex_is_held under PROVE_LOCKINGHerbert Xu1-0/+8
The rhashtable function mutex_is_held is only used when PROVE_LOCKING is enabled. This patch makes the mutex_is_held field in rhashtable optional depending on PROVE_LOCKING. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13lib: rhashtable - Remove weird non-ASCII characters from commentsHerbert Xu1-5/+5
My editor spewed garbage that looked like memory corruption on my screen. It turns out that a number of occurences of "fi" got turned into a ligature. This patch replaces these ligatures with the ASCII letters "fi". Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13Merge branches 'torture.2014.11.03a', 'cpu.2014.11.03a', 'doc.2014.11.13a', ↵Paul E. McKenney1-13/+1
'fixes.2014.11.13a', 'signal.2014.10.29a' and 'rt.2014.10.29a' into HEAD cpu.2014.11.03a: Changes for per-CPU variables. doc.2014.11.13a: Documentation updates. fixes.2014.11.13a: Miscellaneous fixes. signal.2014.10.29a: Signal changes. rt.2014.10.29a: Real-time changes. torture.2014.11.03a: torture-test changes.
2014-11-11kdb: Allow access to sensitive commands to be restricted by defaultDaniel Thompson1-0/+25
Currently kiosk mode must be explicitly requested by the bootloader or userspace. It is convenient to be able to change the default value in a similar manner to CONFIG_MAGIC_SYSRQ_DEFAULT_MASK. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2014-11-11lib/bug: Use RCU list ops for module_bug_listMasami Hiramatsu1-6/+14
Actually since module_bug_list should be used in BUG context, we may not need this. But for someone who want to use this from normal context, this makes module_bug_list an RCU list. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-07cpumask: factor out show_cpumap into separate helper functionSudeep Holla1-0/+29
Many sysfs *_show function use cpu{list,mask}_scnprintf to copy cpumap to the buffer aligned to PAGE_SIZE, append '\n' and '\0' to return null terminated buffer with newline. This patch creates a new helper function cpumap_print_to_pagebuf in cpumask.h using newly added bitmap_print_to_pagebuf and consolidates most of those sysfs functions using the new helper function. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: x86@kernel.org Cc: linux-acpi@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07kobject: fix NULL pointer derefernce in kobj_child_ns_opsPankaj Dubey1-1/+1
We will hit NULL pointer dereference if we call platform_device_register_simple or platform_device_add at very early stage. I have observed following crash when called platform_device_add from "init_irq" hook of machine_desc. This patch fixes this issue and let system handle this case gracefully instead of kernel panic. [0.000000] Unable to handle kernel NULL pointer dereference at virtual address 0000000c [0.000000] pgd = c0004000 [0.000000] [0000000c] *pgd=00000000 [0.000000] Internal error: Oops: 5 [#1] PREEMPT ARM [0.000000] Modules linked in: [0.000000] CPU: 0 PID: 0 Comm: swapper Tainted: G W 3.17.0-rc6-00198-ga1603f1-dirty #319 [0.000000] task: c05b23f0 ti: c05a8000 task.ti: c05a8000 [0.000000] PC is at kobject_namespace+0x18/0x58 [0.000000] LR is at kobject_add_internal+0x90/0x2ec [snip] [0.000000] [<c01b1df0>] (kobject_namespace) from [<c01b2338>] (kobject_add_internal+0x90/0x2ec) [0.000000] [<c01b2338>] (kobject_add_internal) from [<c01b2728>] (kobject_add+0x4c/0x98) [0.000000] [<c01b2728>] (kobject_add) from [<c0226274>] (device_add+0xe8/0x51c) [0.000000] [<c0226274>] (device_add) from [<c0229c70>] (platform_device_add+0xb4/0x214) [0.000000] [<c0229c70>] (platform_device_add) from [<c022a338>] (platform_device_register_full+0xb8/0xdc) [0.000000] [<c022a338>] (platform_device_register_full) from [<c0570214>] (exynos_init_irq+0x90/0x9c) [0.000000] [<c0570214>] (exynos_init_irq) from [<c056c18c>] (init_IRQ+0x2c/0x78) [0.000000] [<c056c18c>] (init_IRQ) from [<c0569a54>] (start_kernel+0x22c/0x378) [0.000000] [<c0569a54>] (start_kernel) from [<40008070>] (0x40008070) [0.000000] Code: e590000c e3500000 0a00000e e5903014 (e593300c) Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07devres: support sizes greater than an unsigned longCristian Stoica1-2/+2
As in 4f452e8aa492c0b8028ca9b4bdb4d018ba28c6c7, use resource_size_t to accomodate sizes greater than the size of an unsigned long int on platforms that have more than 32 bit physical addresses. Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-05fast_hash: avoid indirect function callsHannes Frederic Sowa2-40/+1
By default the arch_fast_hash hashing function pointers are initialized to jhash(2). If during boot-up a CPU with SSE4.2 is detected they get updated to the CRC32 ones. This dispatching scheme incurs a function pointer lookup and indirect call for every hashing operation. rhashtable as a user of arch_fast_hash e.g. stores pointers to hashing functions in its structure, too, causing two indirect branches per hashing operation. Using alternative_call we can get away with one of those indirect branches. Acked-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-5/+54
Conflicts: drivers/net/phy/marvell.c Simple overlapping changes in drivers/net/phy/marvell.c Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-30test: bpf: add a testcase reduced from nmapAlexei Starovoitov1-0/+43
nmap generates classic BPF programs to filter ARP packets with given target MAC which triggered a bug in eBPF x64 JIT. The bug was fixed in commit e0ee9c12157d ("x86: bpf_jit: fix two bugs in eBPF JIT compiler") This patch is adding a testcase in eBPF instructions (those that were generated by classic->eBPF converter) to be processed by JIT. The test is primarily targeting JIT compiler. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29Merge branch 'akpm' (incoming from Andrew Morton)Linus Torvalds1-2/+6
Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits) mm/balloon_compaction: fix deflation when compaction is disabled sh: fix sh770x SCIF memory regions zram: avoid NULL pointer access in concurrent situation mm/slab_common: don't check for duplicate cache names ocfs2: fix d_splice_alias() return code checking mm: rmap: split out page_remove_file_rmap() mm: memcontrol: fix missed end-writeback page accounting mm: page-writeback: inline account_page_dirtied() into single caller lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}() drivers/rtc/rtc-bq32k.c: fix register value memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node() drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock kernel/kmod: fix use-after-free of the sub_info structure drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc mm, thp: fix collapsing of hugepages on madvise drivers: of: add return value to of_reserved_mem_device_init() mm: free compound page with correct order gcov: add ARM64 to GCOV_PROFILE_ALL fsnotify: next_i is freed during fsnotify_unmount_inodes. mm/compaction.c: avoid premature range skip in isolate_migratepages_range ...
2014-10-29lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}()Jan Kara1-2/+6
If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by a multiple of BITS_PER_LONG, they will try to shift a long value by BITS_PER_LONG bits which is undefined. Change the functions to avoid the undefined shift. Coverity id: 1192175 Coverity id: 1192174 Signed-off-by: Jan Kara <jack@suse.cz> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-29Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+3
Pull block layer fixes from Jens Axboe: "A small collection of fixes for the current kernel. This contains: - Two error handling fixes from Jan Kara. One for null_blk on failure to add a device, and the other for the block/scsi_ioctl SCSI_IOCTL_SEND_COMMAND fixing up the error jump point. - A commit added in the merge window for the bio integrity bits unfortunately disabled merging for all requests if CONFIG_BLK_DEV_INTEGRITY wasn't set. Reverse the logic, so that integrity checking wont disallow merges when not enabled. - A fix from Ming Lei for merging and generating too many segments. This caused a BUG in virtio_blk. - Two error handling printk() fixups from Robert Elliott, improving the information given when we rate limit. - Error handling fixup on elevator_init() failure from Sudip Mukherjee. - A fix from Tony Battersby, fixing up a memory leak in the scatterlist handling with scsi-mq" * 'for-linus' of git://git.kernel.dk/linux-block: block: Fix merge logic when CONFIG_BLK_DEV_INTEGRITY is not defined lib/scatterlist: fix memory leak with scsi-mq block: fix wrong error return in elevator_init() scsi: Fix error handling in SCSI_IOCTL_SEND_COMMAND null_blk: Cleanup error recovery in null_add_dev() blk-merge: recaculate segment if it isn't less than max segments fs: clarify rate limit suppressed buffer I/O errors fs: merge I/O error prints into one line