summaryrefslogtreecommitdiffstats
path: root/lib/kunit
AgeCommit message (Collapse)AuthorFilesLines
2019-09-30kunit: fix failure to build without printkBrendan Higgins1-51/+6
Previously KUnit assumed that printk would always be present, which is not a valid assumption to make. Fix that by removing call to vprintk_emit, and calling printk directly. This fixes a build error[1] reported by Randy. For context this change comes after much discussion. My first stab[2] at this was just to make the KUnit logging code compile out; however, it was agreed that if we were going to use vprintk_emit, then vprintk_emit should provide a no-op stub, which lead to my second attempt[3]. In response to me trying to stub out vprintk_emit, Sergey Senozhatsky suggested a way for me to remove our usage of vprintk_emit, which led to my third attempt at solving this[4]. In my third version of this patch[4], I completely removed vprintk_emit, as suggested by Sergey; however, there was a bit of debate over whether Sergey's solution was the best. The debate arose due to Sergey's version resulting in a checkpatch warning, which resulted in a debate over correct printk usage. Joe Perches offered an alternative fix which was somewhat less far reaching than what Sergey had suggested and importantly relied on continuing to use %pV. Much of the debated centered around whether %pV should be widely used, and whether Sergey's version would result in object size bloat. Ultimately, we decided to go with Sergey's version. Reported-by: Randy Dunlap <rdunlap@infradead.org> Link[1]: https://lore.kernel.org/linux-kselftest/c7229254-0d90-d90e-f3df-5b6d6fc0b51f@infradead.org/ Link[2]: https://lore.kernel.org/linux-kselftest/20190827174932.44177-1-brendanhiggins@google.com/ Link[3]: https://lore.kernel.org/linux-kselftest/20190827234835.234473-1-brendanhiggins@google.com/ Link[4]: https://lore.kernel.org/linux-kselftest/20190828093143.163302-1-brendanhiggins@google.com/ Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Tim.Bird@sony.com Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add tests for KUnit managed resourcesAvinash Kondareddy1-0/+228
Add unit tests for KUnit managed resources. KUnit managed resources (struct kunit_resource) are resources that are automatically cleaned up at the end of a KUnit test, similar to the concept of devm_* managed resources. Signed-off-by: Avinash Kondareddy <akndr41@gmail.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add the concept of assertionsBrendan Higgins2-6/+3
Add support for assertions which are like expectations except the test terminates if the assertion is not satisfied. The idea with assertions is that you use them to state all the preconditions for your test. Logically speaking, these are the premises of the test case, so if a premise isn't true, there is no point in continuing the test case because there are no conclusions that can be drawn without the premises. Whereas, the expectation is the thing you are trying to prove. It is not used universally in x-unit style test frameworks, but I really like it as a convention. You could still express the idea of a premise using the above idiom, but I think KUNIT_ASSERT_* states the intended idea perfectly. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add tests for kunit test abortBrendan Higgins2-1/+108
Add KUnit tests for the KUnit test abort mechanism (see preceding commit). Add tests both for general try catch mechanism as well as non-architecture specific mechanism. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add support for test abortBrendan Higgins3-16/+242
Add support for aborting/bailing out of test cases, which is needed for implementing assertions. An assertion is like an expectation, but bails out of the test case early if the assertion is not met. The idea with assertions is that you use them to state all the preconditions for your test. Logically speaking, these are the premises of the test case, so if a premise isn't true, there is no point in continuing the test case because there are no conclusions that can be drawn without the premises. Whereas, the expectation is the thing you are trying to prove. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add initial testsBrendan Higgins4-0/+167
Add a test for string stream along with a simpler example. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add the concept of expectationsBrendan Higgins1-0/+62
Add support for expectations, which allow properties to be specified and then verified in tests. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add assertion printing libraryBrendan Higgins2-1/+143
Add `struct kunit_assert` and friends which provide a structured way to capture data from an expectation or an assertion (introduced later in the series) so that it may be printed out in the event of a failure. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add string_stream a std::stream like string builderBrendan Higgins2-1/+219
A number of test features need to do pretty complicated string printing where it may not be possible to rely on a single preallocated string with parameters. So provide a library for constructing the string as you go similar to C++'s std::string. string_stream is really just a string builder, nothing more. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add test resource management APIBrendan Higgins1-0/+163
Create a common API for test managed resources like memory and test objects. A lot of times a test will want to set up infrastructure to be used in test cases; this could be anything from just wanting to allocate some memory to setting up a driver stack; this defines facilities for creating "test resources" which are managed by the test infrastructure and are automatically cleaned up at the conclusion of the test. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-09-30kunit: test: add KUnit test runner coreBrendan Higgins3-0/+205
Add core facilities for defining unit tests; this provides a common way to define test cases, functions that execute code which is under test and determine whether the code under test behaves as expected; this also provides a way to group together related test cases in test suites (here we call them test_modules). Just define test cases and how to execute them for now; setting expectations on code will be defined later. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>